Iwata

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 32mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 32mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 32mmOD: 40mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 32mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 32mm
OD: 40mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 32mm X Outer Diameter 40mm, Pack of 10

iwata shim ring, inner diameter 32mm outer 40mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 32 毫米 外径 40 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-32mm-x-outer-diameter-40mm-pack-of-10

Carbon Steel ID 32mm x OD 40mm x 0.10mm PN RF032040010, Pack of 10 Pieces

Carbon Steel ID 32mm x OD 40mm x 0.15mm PN RF032040015, Pack of 10 Pieces

Carbon Steel ID 32mm x OD 40mm x 0.20mm PN RF032040020, Pack of 10 Pieces

Carbon Steel ID 32mm x OD 40mm x 0.30mm PN RF032040030, Pack of 10 Pieces

Carbon Steel ID 32mm x OD 40mm x 0.50mm PN RF032040050, Pack of 10 Pieces

Carbon Steel ID 32mm x OD 40mm x 1mm PN RF032040100, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 0.05mm PN RB032040005, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 0.10mm PN RB032040010, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 0.15mm PN RB032040015, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 0.20mm PN RB032040020, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 0.30mm PN RB032040030, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 0.50mm PN RB0032040050, Pack of 10 Pieces

Brass ID 32mm x OD 40mm x 1mm PN RB032040100, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.01mm PN RS032040001, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.02mm PN RS032040002, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.03mm PN RS032040003, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.05mm PN RS032040005, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.10mm PN RS032040010, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.15mm PN RS032040015, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.20mm PN RS032040020, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.30mm PN RS032040030, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 0.50mm PN RS032040050, Pack of 10 Pieces

304 SST ID 32mm x OD 40mm x 1mm PN RS032040100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 17mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 17mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 17mmOD: 32mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 17mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 17mm
OD: 32mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 17mm X Outer Diameter 32mm, Pack of 10

iwata shim ring, inner diameter 17mm outer 32mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 17 毫米 外径 32 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-17mm-x-outer-diameter-32mm-pack-of-10

Carbon Steel ID 17mm x OD 32mm x 0.10mm PN RF017032010, Pack of 10 Pieces

Carbon Steel ID 17mm x OD 32mm x 0.15mm PN RF017032015, Pack of 10 Pieces

Carbon Steel ID 17mm x OD 32mm x 0.20mm PN RF017032020, Pack of 10 Pieces

Carbon Steel ID 17mm x OD 32mm x 0.30mm PN RF017032030, Pack of 10 Pieces

Carbon Steel ID 17mm x OD 32mm x 0.50mm PN RF017032050, Pack of 10 Pieces

Carbon Steel ID 17mm x OD 32mm x 1mm PN RF017032100, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 0.05mm PN RB017032005, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 0.10mm PN RB017032010, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 0.15mm PN RB017032015, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 0.20mm PN RB017032020, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 0.30mm PN RB017032030, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 0.50mm PN RB0017032050, Pack of 10 Pieces

Brass ID 17mm x OD 32mm x 1mm PN RB017032100, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.01mm PN RS017032001, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.02mm PN RS017032002, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.03mm PN RS017032003, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.05mm PN RS01703205, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.10mm PN RS017032010, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.15mm PN RS017032015, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.20mm PN RS017032020, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.30mm PN RS017032030, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 0.50mm PN RS017032050, Pack of 10 Pieces

304 SST ID 17mm x OD 32mm x 1mm PN RS017032100, Pack of 10 Pieces

Shim Ring, Inner Diameter 22mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 22mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 22mmOD: 32mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 22mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 22mm
OD: 32mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 22mm X Outer Diameter 32mm, Pack of 10

iwata shim ring, inner diameter 22mm outer 32mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 22 毫米 外径 32 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-22mm-x-outer-diameter-32mm-pack-of-10

Carbon Steel ID 22mm x OD 32mm x 0.10mm PN RF022032010, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 32mm x 0.15mm PN RF022032015, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 32mm x 0.20mm PN RF022032020, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 32mm x 0.30mm PN RF022032030, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 32mm x 0.50mm PN RF022032050, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 32mm x 1mm PN RF022032100, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 0.05mm PN RB022032005, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 0.10mm PN RB022032010, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 0.15mm PN RB022032015, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 0.20mm PN RB022032020, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 0.30mm PN RB022032030, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 0.50mm PN RB0022032050, Pack of 10 Pieces

Brass ID 22mm x OD 32mm x 1mm PN RB022032100, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.01mm PN RS022032001, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.02mm PN RS022032002, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.03mm PN RS022032003, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.05mm PN RS022032005, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.10mm PN RS022032010, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.15mm PN RS022032015, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.20mm PN RS022032020, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.30mm PN RS022032030, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 0.50mm PN RS022032050, Pack of 10 Pieces

304 SST ID 22mm x OD 32mm x 1mm PN RS022032100, Pack of 10 Pieces

Shim Ring, Inner Diameter 20mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 20mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 20mmOD: 32mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 20mm X Outer Diameter 32mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 20mm
OD: 32mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 20mm X Outer Diameter 32mm, Pack of 10

iwata shim ring, inner diameter 20mm outer 32mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 20 毫米 外径 32 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-20mm-x-outer-diameter-32mm-pack-of-10

Carbon Steel ID 20mm x OD 32mm x 0.10mm PN RF020032010, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 32mm x 0.15mm PN RF020032015, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 32mm x 0.20mm PN RF020032020, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 32mm x 0.30mm PN RF020032030, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 32mm x 0.50mm PN RF020032050, Pack of 10 Pieces

Carbon Steel ID 20mm x OD 32mm x 1mm PN RF020032100, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 0.05mm PN RB020032005, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 0.10mm PN RB020032010, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 0.15mm PN RB020032015, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 0.20mm PN RB020032020, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 0.30mm PN RB020032030, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 0.50mm PN RB0020032050, Pack of 10 Pieces

Brass ID 20mm x OD 32mm x 1mm PN RB020032100, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.01mm PN RS020032001, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.02mm PN RS020032002, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.03mm PN RS020032003, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.05mm PN RS020032005, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.10mm PN RS020032010, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.15mm PN RS020032015, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.20mm PN RS020032020, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.30mm PN RS020032030, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 0.50mm PN RS020032050, Pack of 10 Pieces

304 SST ID 20mm x OD 32mm x 1mm PN RS020032100, Pack of 10 Pieces

Can be attached to taps such as motor shafts

Line-up of iron (black dyed) and stainless steel materials

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>For fixing sprockets and bearings</li><li>Can be attached to taps such as motor shafts</li><li>Line-up of iron (black dyed) and stainless steel materials</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: End Plate with 2 Holes</li><li>φD: 32 mm</li><li>φd: 4.5 (for M4)</li><li>P: 12</li><li>t: 4 mm</li><li>Corresponding Shaft Diameter: 20-22 mm</li><li>Compatible Bearing 1: 6205ZZ</li><li>Compatible Bearing 2: -</li><li>Compatible Bearing 3: 6906ZZ</li><li>Compatible Bearing 4: -</li><li>Corresponding Pillow: UC205</li></ul><h3 class="md-block-header-three">Available Material/Surface Treatment:</h3><ul class="md-block-unordered-list-item"><li>SKU: EPB3204 - Iron S45C/Black Dyed</li><li>SKU: EPB3204S - Stainless Steel SUS304</li></ul>

<h3>Features:</h3>
<ul>
<li>For fixing sprockets and bearings</li>
<li>Can be attached to taps such as motor shafts</li>
<li>Line-up of iron (black dyed) and stainless steel materials</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: End Plate with 2 Holes</li>
<li>φD: 32 mm</li>
<li>φd: 4.5 (for M4)</li>
<li>P: 12</li>
<li>t: 4 mm</li>
<li>Corresponding Shaft Diameter: 20-22 mm</li>
<li>Compatible Bearing 1: 6205ZZ</li>
<li>Compatible Bearing 2: -</li>
<li>Compatible Bearing 3: 6906ZZ</li>
<li>Compatible Bearing 4: -</li>
<li>Corresponding Pillow: UC205</li>
</ul>
<h3>Available Material/Surface Treatment:</h3>
<ul>
<li>SKU: EPB3204 - Iron S45C/Black Dyed</li>
<li>SKU: EPB3204S - Stainless Steel SUS304</li>
</ul>

Leland Tan

Iwata 32mm End Plate With 2 Holes 4.5mm

iwata 32mm end plate 2 holes 4.5mm dengan lubang ball bearings bearing plat akhir bebola iwata/岩田 县32mm带有2个孔的端板4.5mm 球轴承 岩田

iwata-32mm-end-plate-with-2-holes-4-5mm

EPB3204 - Iron S45C/Black Dyed

EPB3204S - Stainless Steel SUS304

Material/Surface Treatment

Entered into force of the strong standard slit collar

Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft

Use in a fixed, such as a sprocket or gear

Holes or screw holes Engineering is also possible

Hex Socket Head Cap Screw (Black Dyeing) - 1 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Entered into force of the strong standard slit collar</li><li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li><li>Use in a fixed, such as a sprocket or gear</li><li>Holes or screw holes Engineering is also possible</li><li>Material is iron</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Slit Collar</li><li>Material: Iron S45C</li><li>Surface Treatment: Black Dyed</li><li>Inner Diameter (φB): 8 mm</li><li>Width (L): 12 mm</li><li>Outer Diameter (φD): 28 mm</li><li>W: 1.5 mm</li><li>X: 8.5 mm</li><li>Y: 5 mm</li><li>A: 10 mm</li><li>Tightening Screw (M): M5x16</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (Black Dyeing) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Entered into force of the strong standard slit collar</li>
<li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li>
<li>Use in a fixed, such as a sprocket or gear</li>
<li>Holes or screw holes Engineering is also possible</li>
<li>Material is iron</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Slit Collar</li>
<li>Material: Iron S45C</li>
<li>Surface Treatment: Black Dyed</li>
<li>Inner Diameter (φB): 8 mm</li>
<li>Width (L): 12 mm</li>
<li>Outer Diameter (φD): 28 mm</li>
<li>W: 1.5 mm</li>
<li>X: 8.5 mm</li>
<li>Y: 5 mm</li>
<li>A: 10 mm</li>
<li>Tightening Screw (M): M5x16</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (Black Dyeing) - 1 Piece</li>
</ul>

Iwata Iron Black Dyeing Standard Slit Collar 8mm X 12mm SCS0812C

iwata iron black dyeing standard slit collar 8mm x 12mm scs0812c besi pencelupan hitam standar ball bearings bearing bebola iwata/岩田 铁黑色染色标准开s 球轴承 岩田

iwata-iron-black-dyeing-standard-slit-collar-8mm-x-12mm-scs0812c

Standard set collar attached with set screw

The inner ring of bearing can be held down by 30° chamfer

Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Standard set collar attached with set screw</li><li>The inner ring of bearing can be held down by 30° chamfer</li><li>Can be used to fix sprockets and gears</li><li>Material is aluminium</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Basic Shaft Collar</li><li>Material: Aluminium A2017</li><li>Inner Diameter (φB): 6 mm</li><li>Width (L): 6 mm</li><li>Outer Diameter (φD): 15 mm</li><li>Tightening Screw (M): M4x4</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Standard set collar attached with set screw</li>
<li>The inner ring of bearing can be held down by 30° chamfer</li>
<li>Can be used to fix sprockets and gears</li>
<li>Material is aluminium</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Basic Shaft Collar</li>
<li>Material: Aluminium A2017</li>
<li>Inner Diameter (φB): 6 mm</li>
<li>Width (L): 6 mm</li>
<li>Outer Diameter (φD): 15 mm</li>
<li>Tightening Screw (M): M4x4</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Set Screws (Recessed SUSXM7) - 2 Piece</li>
</ul>

Iwata Aluminium Basic Shaft Collar 6mm X 6mm SC0606A

iwata aluminium basic shaft collar 6mm x sc0606a ball bearings bearing kerah bebola iwata/岩田 铝制基础轴环6mm 球轴承 岩田

iwata-aluminium-basic-shaft-collar-6mm-x-6mm-sc0606a

Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft

Sprocket or you can use a fixed, such as a gear

Holes or screw holes Correspondence is also possible

Hex Socket Head Cap Screw (SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Easy to standard separate Collar</li><li>Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft</li><li>Sprocket or you can use a fixed, such as a gear</li><li>Holes or screw holes Correspondence is also possible</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Separate Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 18 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 45 mm</li><li>W: 1.5 mm</li><li>X: 15 mm</li><li>Y: 8 mm</li><li>Tightening Screw (M): M6x20</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Easy to standard separate Collar</li>
<li>Detachable Strong tightening force for tightening in-plane, it is hard to type scratch the shaft</li>
<li>Sprocket or you can use a fixed, such as a gear</li>
<li>Holes or screw holes Correspondence is also possible</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Separate Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 18 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 45 mm</li>
<li>W: 1.5 mm</li>
<li>X: 15 mm</li>
<li>Y: 8 mm</li>
<li>Tightening Screw (M): M6x20</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 2 Piece</li>
</ul>