Center

FLUKE

HIOKI

Ingco

KYORITSU

Lutron

PRO'SKIT

RS Pro

TRIPLETT

Test & Measurement

test-measurement

Clamp Meters

clamp-meters

Current Clamps

current-clamps

Electrical Power Testing

electrical-power-testing

Multimeters

multimeters

Power & Energy Meters

power-energy-meters

Triplett CM1050 1000A True Rms AC/DC Clamp Meter

 The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.  

True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms

Captures the instantaneous surge (inrush) current when power equipment is turned on

Built-in Non-Contact Voltage Detector with LED

Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives

Lo Z (impedance) mode for identifying ghost voltages

Data Hold freezes the display and Relative Mode for making comparisons to a stored reference value and DC Zero

Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case

<h3 class="md-block-header-three">Triplett CM1050 1000A True Rms AC/DC Clamp Meter</h3> The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case. <ul class="md-block-unordered-list-item"><li>True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms</li><li>Captures the instantaneous surge (inrush) current when power equipment is turned on</li><li>1.4″ (35mm) clamp jaw</li><li>Built-in Non-Contact Voltage Detector with LED</li><li>Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives</li><li>Lo Z (impedance) mode for identifying ghost voltages</li><li>Peak voltage measurement with Min/Max</li><li>Data Hold freezes the display and Relative Mode for making comparisons to a stored reference value and DC Zero</li><li>Auto power off with disable</li><li>Built-in Flashlight</li><li>cETLus listed</li><li>Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case</li></ul>

<h3>Triplett CM1050 1000A True Rms AC/DC Clamp Meter</h3>
&nbsp;The Triplett Model CM1050 True RMS Clampmeter can measure AC and DC current up to 1000A without breaking the circuit by clamping around a single conductor. This saves time and the circuit will not be damaged. True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms. Additional measurements include Resistance, Capacitance, Frequency, Temperature, Diode Test, and Continuity. Measurements can read on the 6000 count backlit LCD. It has an Inrush current function that captures the instantaneous surge (inrush) current when power equipment is turned on. Features include: Lo Z (impedance) mode for identifying ghost voltages, Low Pass FIlter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives, Peak voltage capture with min/max, NCV Detector with LED, Relative/DC zero function, Auto power off, and a built-in flashlight. Data Hold freezes the display for easy viewing. CAT IV-600V safety category. cETLus listed. Includes 3 AAA batteries, test leads, Type K thermocouple probe, and carrying case.&nbsp;&nbsp;
<ul>
<li>True RMS provides better accuracy when measuring non-sinusoidal or noisy waveforms</li>
<li>Captures the instantaneous surge (inrush) current when power equipment is turned on</li>
<li>1.4″ (35mm) clamp jaw</li>
<li>Built-in Non-Contact Voltage Detector with LED</li>
<li>Low Pass Filter (LPF) for filtering frequency and harmonic interference when measuring variable frequency drives</li>
<li>Lo Z (impedance) mode for identifying ghost voltages</li>
<li>Peak voltage measurement with Min/Max</li>
<li>Data Hold freezes the display and Relative Mode for making comparisons to a stored reference value and DC Zero</li>
<li>Auto power off with disable</li>
<li>Built-in Flashlight</li>
<li>cETLus listed</li>
<li>Includes test leads, Type K thermocouple bead probe, 3 AAA batteries, and carrying case</li>
</ul>

Extech

ACISION

PCE Instruments

MEGGER

AMPROBE

Fluke Networks

Other Measuring Tools

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

triplett cm1050 1000a true rms ac/dc clamp meter meteran klem sejati meters triplett/三胞胎 真有效值交流/直流钳形表 三胞胎

triplett-cm1050-1000a-true-rms-ac-dc-clamp-meter

Fluke 393/E Clamp Meter, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V

The FLUKE-393/E CAT III 1500 V True-rms Clamp Meter with iFlex is designed for technicians who work in dc environments up to 1500 V solar arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw. The included iFlex flexible current probe extended ac current measurements up to 2500 amps. This clamp has a thin jaw, giving you access to cables in crowded combiner boxes. Test leads are designed with your work in mind, and are also rated to CAT III 1500 V.

Batteries 2 AA IEC LR6 alkaline
Display Dual display with backlight
Automatic power off 20 minutes
Range 999.9 A
Resolution 0.1 A

<h3 class="md-block-header-three">Fluke 393/E Clamp Meter, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V</h3> The FLUKE-393/E CAT III 1500 V True-rms Clamp Meter with iFlex is designed for technicians who work in dc environments up to 1500 V solar arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw. The included iFlex flexible current probe extended ac current measurements up to 2500 amps. This clamp has a thin jaw, giving you access to cables in crowded combiner boxes. Test leads are designed with your work in mind, and are also rated to CAT III 1500 V.Batteries 2 AA IEC LR6 alkaline Display Dual display with backlight Automatic power off 20 minutes Range 999.9 A Resolution 0.1 A

<h3>Fluke 393/E Clamp Meter, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V</h3>
&nbsp;
The FLUKE-393/E CAT III 1500 V True-rms Clamp Meter with iFlex is designed for technicians who work in dc environments up to 1500 V solar arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp will measure up to 1500 V dc, 1000 V ac, and up to 999.9 A dc or ac through the clamp jaw. The included iFlex flexible current probe extended ac current measurements up to 2500 amps. This clamp has a thin jaw, giving you access to cables in crowded combiner boxes. Test leads are designed with your work in mind, and are also rated to CAT III 1500 V.
Batteries 2 AA IEC LR6 alkaline 
Display Dual display with backlight 
Automatic power off 20 minutes 
Range 999.9 A 
Resolution 0.1 A

SCHNEIDER ELECTRIC

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke 393/e clamp meter, 1000a dc, max current 2500a ac cat iii 1500v arus maksimum meters meter pengapit 393/e, maks fluke/福禄克 钳形表，1000a 直流，最大电流 交流 福禄克

fluke-393-e-clamp-meter-1000a-dc-max-current-2500a-ac-cat-iii-1500v

Fluke 381 Clamp Meter Wireless, 1000A Dc, Max Current 2500A Ac Cat Iii 1000 V, Cat Iv 600 V

 Absolute Maximum AC Current Measurement	2500A ac

Absolute Maximum DC Current Measurement	1000A dc

Absolute Maximum AC Voltage Measurement	1000V ac

Absolute Maximum DC Voltage Measurement	1000V dc

Absolute Maximum Resistance Measurement	60kΩ

Clamp Meter Type	AC-DC Flexible Clamp Meter

Best AC Voltage Accuracy	±1.5% + 5 Digits

Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance

DC Current Measurement Range	Maximum of 999.9 A dc

Best Resistance Measurement Accuracy	±1% + 5 Digits

Safety Category	CAT III 1000 V, CAT IV 600 V

AC Current Measurement Range	Maximum of 2500 A ac

• 1000 A ac and dc current measurement with fixed jaws
• 2500 A ac current measurement with iFlex flexible current probe
• 1000 V ac (true rms) and dc voltage measurement
• Frequency, resistance, and continuity measurement
• Display HOLD, Min, max, average and inrush recording
• Wireless technology - allows you to take readings remotely or in tough-to-reach spots.
• Automatically sets the correct measurement range for convenience
• Large and easy-to-read backlit display
• Low pass filter for accurate readings in noisy environments
• Clamping jaw avoids the risk of handling live wires
• CAT IV 600V, CAT III 1000 V safety rating

• Electrical installations
• Power utilities
• Public infrastructure
• Industrial automation 

<h3 class="md-block-header-three">Fluke 381 Clamp Meter Wireless, 1000A Dc, Max Current 2500A Ac Cat Iii 1000 V, Cat Iv 600 V</h3><ul class="md-block-unordered-list-item"><li> Absolute Maximum AC Current Measurement	2500A ac</li><li>Absolute Maximum DC Current Measurement	1000A dc</li><li>Absolute Maximum AC Voltage Measurement	1000V ac</li><li>Absolute Maximum DC Voltage Measurement	1000V dc</li><li>Absolute Maximum Resistance Measurement	60kΩ</li><li>Connectivity	Wireless</li><li>Model Number	381</li><li>AC Current Measurement Resolution	100mA</li><li>DC Current Measurement Resolution	100mA</li><li>Best DC Current Accuracy	±2% + 5 Digits</li><li>Clamp Meter Type	AC-DC Flexible Clamp Meter</li><li>Best AC Current Accuracy	±2% +5 digits</li><li>Best AC Voltage Accuracy	±1.5% + 5 Digits</li><li>Best DC Voltage Accuracy	±1% + 5 Digits</li><li>True RMS	Yes</li><li>Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance</li><li>Jaw Capacity Busbars	34mm</li><li>Dimensions	277 x 88 x 43mm</li><li>DC Current Measurement Range	Maximum of 999.9 A dc</li><li>Width	88mm</li><li>DC Voltage Measurement Resolution	100mV</li><li>Maximum Conductor Size	7.5mm</li><li>Weight	350g</li><li>Display Type	LCD</li><li>Best Resistance Measurement Accuracy	±1% + 5 Digits</li><li>Safety Category	CAT III 1000 V, CAT IV 600 V</li><li>Maximum Operating Temperature	+50°C</li><li>Minimum Operating Temperature	-10°C</li><li>Height	43mm</li><li>AC Voltage Measurement Resolution	100mV</li><li>AC Current Measurement Range	Maximum of 2500 A ac</li><li>AC Voltage Measurement Range	1000 V ac</li><li>Safety Category Level	CAT IV, CAT III</li><li>Resistance Measurement Resolution	100mΩ</li><li>Length	277mm</li><li>Power Source	Battery</li><li>Safety Category Voltage	600 V, 1000 V</li><li>Battery Type	AA</li></ul>Fluke 381 Features &amp; Benefits• 1000 A ac and dc current measurement with fixed jaws • 2500 A ac current measurement with iFlex flexible current probe • 1000 V ac (true rms) and dc voltage measurement • Frequency, resistance, and continuity measurement • Display HOLD, Min, max, average and inrush recording • Wireless technology - allows you to take readings remotely or in tough-to-reach spots. • Automatically sets the correct measurement range for convenience • Large and easy-to-read backlit display • Low pass filter for accurate readings in noisy environments • Clamping jaw avoids the risk of handling live wires • CAT IV 600V, CAT III 1000 V safety ratingApplications• Electrical installations • Power utilities • Public infrastructure • Industrial automation

<h3>Fluke 381 Clamp Meter Wireless, 1000A Dc, Max Current 2500A Ac Cat Iii 1000 V, Cat Iv 600 V</h3>
<ul>
<li>&nbsp;Absolute Maximum AC Current Measurement	2500A ac</li>
<li>Absolute Maximum DC Current Measurement	1000A dc</li>
<li>Absolute Maximum AC Voltage Measurement	1000V ac</li>
<li>Absolute Maximum DC Voltage Measurement	1000V dc</li>
<li>Absolute Maximum Resistance Measurement	60kΩ</li>
<li>Connectivity	Wireless</li>
<li>Model Number	381</li>
<li>AC Current Measurement Resolution	100mA</li>
<li>DC Current Measurement Resolution	100mA</li>
<li>Best DC Current Accuracy	±2% + 5 Digits</li>
<li>Clamp Meter Type	AC-DC Flexible Clamp Meter</li>
<li>Best AC Current Accuracy	±2% +5 digits</li>
<li>Best AC Voltage Accuracy	±1.5% + 5 Digits</li>
<li>Best DC Voltage Accuracy	±1% + 5 Digits</li>
<li>True RMS	Yes</li>
<li>Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance</li>
<li>Jaw Capacity Busbars	34mm</li>
<li>Dimensions	277 x 88 x 43mm</li>
<li>DC Current Measurement Range	Maximum of 999.9 A dc</li>
<li>Width	88mm</li>
<li>DC Voltage Measurement Resolution	100mV</li>
<li>Maximum Conductor Size	7.5mm</li>
<li>Weight	350g</li>
<li>Display Type	LCD</li>
<li>Best Resistance Measurement Accuracy	±1% + 5 Digits</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600 V</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Height	43mm</li>
<li>AC Voltage Measurement Resolution	100mV</li>
<li>AC Current Measurement Range	Maximum of 2500 A ac</li>
<li>AC Voltage Measurement Range	1000 V ac</li>
<li>Safety Category Level	CAT IV, CAT III</li>
<li>Resistance Measurement Resolution	100mΩ</li>
<li>Length	277mm</li>
<li>Power Source	Battery</li>
<li>Safety Category Voltage	600 V, 1000 V</li>
<li>Battery Type	AA</li>
</ul>
Fluke 381 Features &amp; Benefits
• 1000 A ac and dc current measurement with fixed jaws 
• 2500 A ac current measurement with iFlex flexible current probe 
• 1000 V ac (true rms) and dc voltage measurement 
• Frequency, resistance, and continuity measurement 
• Display HOLD, Min, max, average and inrush recording 
• Wireless technology - allows you to take readings remotely or in tough-to-reach spots. 
• Automatically sets the correct measurement range for convenience 
• Large and easy-to-read backlit display 
• Low pass filter for accurate readings in noisy environments 
• Clamping jaw avoids the risk of handling live wires 
• CAT IV 600V, CAT III 1000 V safety rating
Applications
• Electrical installations 
• Power utilities 
• Public infrastructure 
• Industrial automation&nbsp;

381 Remote Display True-RMS AC/DC Clamp Meter with iFlex Data Sheet

Guide - FLUKE 381

Manual - FLUKE 381

fluke 381 clamp meter wireless, 1000a dc, max current 2500a ac cat iii 1000 v, iv 600 nirkabel, arus maksimum meters pengapit wayarles, maks fluke/福禄克 无线钳形表，1000a 直流，最大电流 交流，cat v，cat 福禄克

fluke-381-clamp-meter-wireless-1000a-dc-max-current-2500a-ac-cat-iii-1000-v-cat-iv-600-v

Fluke 393FC/E Clamp Meter Wi-Fi, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V 

• IP54 rating indicates it's protected against dust and low-pressure water sprays from all directions
• Light 520g weight means it's easy to carry
• Clear display with backlight for easy reading of data

• Transport services
• Battery banks
• Industrial power supplies 

<h3 class="md-block-header-three">Fluke 393FC/E Clamp Meter Wi-Fi, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V </h3><h3 class="md-block-header-three">Features &amp; Benefits</h3>• IP54 rating indicates it&#x27;s protected against dust and low-pressure water sprays from all directions • Light 520g weight means it&#x27;s easy to carry • Clear display with backlight for easy reading of data<h3 class="md-block-header-three">Applications</h3>• Transport services • Battery banks • Industrial power supplies

<h3>Fluke 393FC/E Clamp Meter Wi-Fi, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V&nbsp;</h3>
<h3>Features &amp; Benefits</h3>
• IP54 rating indicates it's protected against dust and low-pressure water sprays from all directions 
• Light 520g weight means it's easy to carry 
• Clear display with backlight for easy reading of data
<h3>Applications</h3>
• Transport services 
• Battery banks 
• Industrial power supplies&nbsp;

Fluke 393FC/E Clamp Meter Wi-Fi, 1000A Dc, Max Current 2500A Ac Cat Iii 1500V

fluke 393fc/e clamp meter wi-fi, 1000a dc, max current 2500a ac cat iii 1500v arus maksimum meters wi-fi pengapit 393fc/e, maks fluke/福禄克 钳形表（wi-fi 版），1000a 直流，最大电流 交流 福禄克

fluke-393fc-e-clamp-meter-wi-fi-1000a-dc-max-current-2500a-ac-cat-iii-1500v

Fluke I1010 Current Clamp, 1000A Dc Max, AC/DC Adapter, 600A Ac Ac Max, Voltage Output

 Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead.
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia.
d.c. current zero control for nulling out jaw/sensor offset
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter
Battery check mode
Compatible with meter input impedance ≥1MΩ
Conforms to IEC 1010-1 Cat III 600V
Supplied With: 9V PP3 alkaline battery and operators manual.


FLUKE Current Clamp, 600V Safety Category Voltage, 60h Battery Life - 1640971

Use this current clamp from FLUKE when you need to measure flow without breaking a circuit. Wide jaws allow you to clamp the device over conductor diameters up to 30mm. Marks on each jaw arm help you reliably centre the conductor. A quick press of the lever opens and closes the jaws, so you can use the clamp one-handed for convenience. The 1.6m cable length means you'll have no problem reaching into awkward spaces.


• Hall-effect probe provides accurate readings from AC and DC circuits
• CAT III 600V safety category rating means it's safe to use on high-power busbars and distribution circuits
• Shrouded banana plugs protect you from shocks
• 60h battery life for dependability


• Automotive industry
• Medical equipment
• Telecommunications networks
• Consumer electronics
• Power distribution


What's the measuring range of this current clamp?

This clamp measures DC currents between 1 and 1000A and AC currents between 1 and 600A, making it suitable for domestic and industrial circuits.


What instruments does this current clamp plug into?

The product works with FLUKE multimeters, 120B series oscilloscopes and process meters. This includes the 125B scopemeter (919-5065), 789 series loop calibrator (449-4982) and 175 digital handheld multimeter (394-8826).
 

<h3 class="md-block-header-three">Fluke I1010 Current Clamp, 1000A Dc Max, AC/DC Adapter, 600A Ac Ac Max, Voltage Output</h3> Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia. d.c. current zero control for nulling out jaw/sensor offset Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter Battery check mode Compatible with meter input impedance ≥1MΩ Conforms to IEC 1010-1 Cat III 600V Supplied With: 9V PP3 alkaline battery and operators manual. <h3 class="md-block-header-three">FLUKE Current Clamp, 600V Safety Category Voltage, 60h Battery Life - 1640971</h3>Use this current clamp from FLUKE when you need to measure flow without breaking a circuit. Wide jaws allow you to clamp the device over conductor diameters up to 30mm. Marks on each jaw arm help you reliably centre the conductor. A quick press of the lever opens and closes the jaws, so you can use the clamp one-handed for convenience. The 1.6m cable length means you&#x27;ll have no problem reaching into awkward spaces. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Hall-effect probe provides accurate readings from AC and DC circuits • CAT III 600V safety category rating means it&#x27;s safe to use on high-power busbars and distribution circuits • Shrouded banana plugs protect you from shocks • 60h battery life for dependability <h3 class="md-block-header-three">Applications</h3>• Automotive industry • Medical equipment • Telecommunications networks • Consumer electronics • Power distribution <h3 class="md-block-header-three">What&#x27;s the measuring range of this current clamp?</h3>This clamp measures DC currents between 1 and 1000A and AC currents between 1 and 600A, making it suitable for domestic and industrial circuits. <h3 class="md-block-header-three">What instruments does this current clamp plug into?</h3>The product works with FLUKE multimeters, 120B series oscilloscopes and process meters. This includes the 125B scopemeter (919-5065), 789 series loop calibrator (449-4982) and 175 digital handheld multimeter (394-8826).

<h3>Fluke I1010 Current Clamp, 1000A Dc Max, AC/DC Adapter, 600A Ac Ac Max, Voltage Output</h3>
&nbsp;Rugged current clamp adaptor suitable for use with multimeters to give non intrusive measurement of d.c. and a.c. current. Integral 1.2m 4mm shrouded plug lead. 
Jaws accept conductor size of 1 x 30mm or 2 x 25mm dia. 
d.c. current zero control for nulling out jaw/sensor offset 
Superior noise immunity allows measurement in electrically noisy environments, such as adjustable speed drive line-side and load currents 
Shielded, heat-resistant silicon rubber cable connects clamp to digital multimeter 
Battery check mode 
Compatible with meter input impedance ≥1MΩ 
Conforms to IEC 1010-1 Cat III 600V 
Supplied With: 9V PP3 alkaline battery and operators manual. 

<h3>FLUKE Current Clamp, 600V Safety Category Voltage, 60h Battery Life - 1640971</h3>
Use this current clamp from FLUKE when you need to measure flow without breaking a circuit. Wide jaws allow you to clamp the device over conductor diameters up to 30mm. Marks on each jaw arm help you reliably centre the conductor. A quick press of the lever opens and closes the jaws, so you can use the clamp one-handed for convenience. The 1.6m cable length means you'll have no problem reaching into awkward spaces. 

<h3>Features &amp; Benefits</h3>
• Hall-effect probe provides accurate readings from AC and DC circuits 
• CAT III 600V safety category rating means it's safe to use on high-power busbars and distribution circuits 
• Shrouded banana plugs protect you from shocks 
• 60h battery life for dependability 

<h3>Applications</h3>
• Automotive industry 
• Medical equipment 
• Telecommunications networks 
• Consumer electronics 
• Power distribution 

<h3>What's the measuring range of this current clamp?</h3>
This clamp measures DC currents between 1 and 1000A and AC currents between 1 and 600A, making it suitable for domestic and industrial circuits. 

<h3>What instruments does this current clamp plug into?</h3>
The product works with FLUKE multimeters, 120B series oscilloscopes and process meters. This includes the 125B scopemeter (919-5065), 789 series loop calibrator (449-4982) and 175 digital handheld multimeter (394-8826). 
&nbsp;

fluke i1010 current clamp, 1000a dc max, ac/dc adapter, 600a ac voltage output penjepit arus i1010, maks, adaptor ac/dc, tegangan keluaran clamps pengapit maks 1000a, penyesuai 600a, voltan fluke/福禄克 电流钳，最大 直流电流，交流/直流适配器，最大 交流电流，电压输出 福禄克

fluke-i1010-current-clamp-1000a-dc-max-ac-dc-adapter-600a-ac-ac-max-voltage-output

 • 1000A AC Clamp Meter, AC60/600/1000A Auto Range
• True-RMS
• Peak Hold for inrush current
• 6000 counts display with Backlight
• ø33mm Tear Drop shaped jaw easy to use in tight places
• Double molding gives comfortable feeling
• Safety standerd IEC 61010-1, CAT Ⅳ 300V/ CAT Ⅲ 600V 

• 1000A AC Clamp Meter, AC60/600/1000A Auto Range • True-RMS • Peak Hold for inrush current • 6000 counts display with Backlight • ø33mm Tear Drop shaped jaw easy to use in tight places • Double molding gives comfortable feeling • Safety standerd IEC 61010-1, CAT Ⅳ 300V/ CAT Ⅲ 600V

&nbsp;• 1000A AC Clamp Meter, AC60/600/1000A Auto Range 
• True-RMS 
• Peak Hold for inrush current 
• 6000 counts display with Backlight 
• ø33mm Tear Drop shaped jaw easy to use in tight places 
• Double molding gives comfortable feeling 
• Safety standerd IEC 61010-1, CAT Ⅳ 300V/ CAT Ⅲ 600V&nbsp;

Datasheet_2127R

SANWA METER

Others

CHIAYO

RAACO

SHOW

KYORITSU INSTRUMENTS

Microphone

Tools Organizers

Soldering & Brazing Equipment

Motor Rotation/Phase

Toolboxes

Multiple Tools Sets

Flossie Chua

Kyoritsu Digital Clamp Meter 2127R (valid for Singapore Purchases Only)

kyoritsu digital clamp meter 2127r (valid singapore purchases only) electrical power testing pengujian daya listrik ujian tenaga elektrik kyoritsu/协立 共立数字钳形表2127r 电力测试 协立

kyoritsu-digital-clamp-meter-2127r-valid-for-singapore-purchases-only

• Ultra slim and lightweight Handy design
• Ø33mm Tear Drop Jaw easy to use in tight places
• 1000A AC Clamp Meter
• DMM function ACV, DCV, Ω, Continuity Buzzer
• Fuseless electronic protection on "Ω/Continuity Buzzer" up to 600V
• Safety Standard IEC 61010-1, 61010-2-032 CAT IV 300V / CAT III 600V 

AC A40.00/400.0/1000A (Auto-ranging)
±1.5%rdg±5dgt (45 - 65Hz)
±2.0%rdg±5dgt (40 - 1kHz)

AC V4.000/40.00/400.0/600V (Auto-ranging)
±1.8%rdg±7dgt (45 - 65Hz)
±2.3%rdg±8dgt (65 - 500Hz)

DC V400.0mV/4.000/40.00/400.0/600V (Auto-ranging)
±1.0%rdg±3dgt (400m V range is excluded.)

Ω 400.0Ω/4.000/40.00/400.0 kΩ/4.000/40.00 MΩ (Auto-ranging)
±2.0%rdg±4dgt (0 - 400kΩ)
±4.0%rdg±4dgt (4MΩ)
±8.0%rdg±4dgt (40MΩ)

Continuity buzzer: buzzer sounds below 50±30Ω
Conductor size: Ø 33mm max.
Applicable standards: IEC 61010-1
CAT IV 300V / CAT III 600V Pollution degree 2 (AC A),
CAT III 300V / CAT II 600V Pollution degree 2 (AC/DC V)
IEC 61010-031, IEC 61010-2-032, IEC 61326 (EMC),
EN 50581 (RoHS)
Power source: R03/LR03 (AAA) (1.5V) × 2 *continuous measuring time:
Approx. 120 hours (Auto power off: approx. 10 minutes)
Dimensions: 190(L) × 68(W) × 20(D)mm
Weight: 120g (including batteries)
Included Accessories 7107A (Test leads), 9160 (Carrying case), R03 (AAA) × 2, Instruction Manual 
Optional Accessories 8008 (Multi-Tran) 

• Ultra slim and lightweight Handy design • Ø33mm Tear Drop Jaw easy to use in tight places • 1000A AC Clamp Meter • DMM function ACV, DCV, Ω, Continuity Buzzer • Fuseless electronic protection on &quot;Ω/Continuity Buzzer&quot; up to 600V • Safety Standard IEC 61010-1, 61010-2-032 CAT IV 300V / CAT III 600V AC A40.00/400.0/1000A (Auto-ranging) ±1.5%rdg±5dgt (45 - 65Hz) ±2.0%rdg±5dgt (40 - 1kHz) AC V4.000/40.00/400.0/600V (Auto-ranging) ±1.8%rdg±7dgt (45 - 65Hz) ±2.3%rdg±8dgt (65 - 500Hz) DC V400.0mV/4.000/40.00/400.0/600V (Auto-ranging) ±1.0%rdg±3dgt (400m V range is excluded.) Ω 400.0Ω/4.000/40.00/400.0 kΩ/4.000/40.00 MΩ (Auto-ranging) ±2.0%rdg±4dgt (0 - 400kΩ) ±4.0%rdg±4dgt (4MΩ) ±8.0%rdg±4dgt (40MΩ) Continuity buzzer: buzzer sounds below 50±30Ω Conductor size: Ø 33mm max. Applicable standards: IEC 61010-1 CAT IV 300V / CAT III 600V Pollution degree 2 (AC A), CAT III 300V / CAT II 600V Pollution degree 2 (AC/DC V) IEC 61010-031, IEC 61010-2-032, IEC 61326 (EMC), EN 50581 (RoHS) Power source: R03/LR03 (AAA) (1.5V) × 2 *continuous measuring time: Approx. 120 hours (Auto power off: approx. 10 minutes) Dimensions: 190(L) × 68(W) × 20(D)mm Weight: 120g (including batteries) Included Accessories 7107A (Test leads), 9160 (Carrying case), R03 (AAA) × 2, Instruction Manual Optional Accessories 8008 (Multi-Tran)

• Ultra slim and lightweight Handy design 
• Ø33mm Tear Drop Jaw easy to use in tight places 
• 1000A AC Clamp Meter 
• DMM function ACV, DCV, Ω, Continuity Buzzer 
• Fuseless electronic protection on "Ω/Continuity Buzzer" up to 600V 
• Safety Standard IEC 61010-1, 61010-2-032 CAT IV 300V / CAT III 600V&nbsp;
AC A40.00/400.0/1000A (Auto-ranging) 
±1.5%rdg±5dgt (45 - 65Hz) 
±2.0%rdg±5dgt (40 - 1kHz) 
 
AC V4.000/40.00/400.0/600V (Auto-ranging) 
±1.8%rdg±7dgt (45 - 65Hz) 
±2.3%rdg±8dgt (65 - 500Hz) 
 
DC V400.0mV/4.000/40.00/400.0/600V (Auto-ranging) 
±1.0%rdg±3dgt (400m V range is excluded.) 
 
Ω 400.0Ω/4.000/40.00/400.0 kΩ/4.000/40.00 MΩ (Auto-ranging) 
±2.0%rdg±4dgt (0 - 400kΩ) 
±4.0%rdg±4dgt (4MΩ) 
±8.0%rdg±4dgt (40MΩ) 
 
Continuity buzzer: buzzer sounds below 50±30Ω 
Conductor size: Ø 33mm max. 
Applicable standards: IEC 61010-1 
CAT IV 300V / CAT III 600V Pollution degree 2 (AC A), 
CAT III 300V / CAT II 600V Pollution degree 2 (AC/DC V) 
IEC 61010-031, IEC 61010-2-032, IEC 61326 (EMC), 
EN 50581 (RoHS) 
Power source: R03/LR03 (AAA) (1.5V) × 2 *continuous measuring time: 
Approx. 120 hours (Auto power off: approx. 10 minutes) 
Dimensions: 190(L) × 68(W) × 20(D)mm 
Weight: 120g (including batteries) 
Included Accessories 7107A (Test leads), 9160 (Carrying case), R03 (AAA) × 2, Instruction Manual 
Optional Accessories 8008 (Multi-Tran)&nbsp;

Kyoritsu KEW 2200R Ac Digital Clamp Meter With True Rms (valid for Singapore Purchases Only)

kyoritsu kew 2200r ac digital clamp meter true rms (valid singapore purchases only) dengan electrical power testing pengujian daya listrik ujian tenaga elektrik 具有真正rms的 kyoritsu/协立 2200r交流数字钳形表 电力测试 协立

kyoritsu-kew-2200r-ac-digital-clamp-meter-with-true-rms-valid-for-singapore-purchases-only

RS PRO Instruction Manual

RS PRO Datasheet

Siemens

STANLEY

DEUTSCH

Facom

RAPID

ECLIPSE TOOLS

Plugs & Connector 

Button Switch

Aluminium Capacitors

Rs Pro IPM138N Clamp Meter, 600A Dc, Max Current 600A Ac Cat Ii 1000 V, Cat Iii 600 V

rs pro ipm138n clamp meter, 600a dc, max current ac cat ii 1000 v, iii 600 pengukur klem ipm138n, arus maks electrical power testing pengujian daya listrik meter pengapit ujian tenaga elektrik 钳形表，600a 直流，最大电流 交流 v，cat 电力测试 rs专业版

rs-pro-ipm138n-clamp-meter-600a-dc-max-current-600a-ac-cat-ii-1000-v-cat-iii-600-v

Hioki True RMS 2000 A AC/DC Clamp Meter CM4373

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373 is a 2000A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.

• Automatic AC/DC function helps boost work efficiency 

• Measure DC voltages of up to 1700 V (*1) 

• Simultaneously measure inrush current in RMS and crest values 

• Expanded -25 °C to 65 °C operating temperature range 

• IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50


DC Current range: 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)

AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.3 A (at 600 A)

Crest factor: 600.0 A range: 3 or less,
2000 A range: 2.84 or less

DC+AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)

DC Voltage range: 600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)

AC Voltage range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V)

DC+AC Voltage range: 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V)

Resistance range: 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)

Capacitance range: 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)

Frequency range: 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)

Temperature (K): -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C

Voltage detection: Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz

Other functions: Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment

Dustproof, waterproof: Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet.

Power supply: LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF)

Core jaw diameter: φ55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W×18 mm (0.71 in) D

Dimensions and mass: 65 mm (2.56 in) W×250 mm (9.84 in) H×35 mm (1.38 in) D mm, 530 g (18.7 oz)

Hioki True RMS 2000 A AC/DC Clamp Meter CM4373Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373 is a 2000A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.CAT IV 600 V, CAT III 1000 V Key Features • Multiple measurement functions • Automatic AC/DC function helps boost work efficiency • Measure DC voltages of up to 1700 V (*1) • Simultaneously measure inrush current in RMS and crest values • Expanded -25 °C to 65 °C operating temperature range • IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50 DC Current range: 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.3 A (at 600 A)Crest factor: 600.0 A range: 3 or less, 2000 A range: 2.84 or lessDC+AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)DC Voltage range: 600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)AC Voltage range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V)DC+AC Voltage range: 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V)Resistance range: 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)Capacitance range: 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)Frequency range: 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)Temperature (K): -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚CVoltage detection: Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 HzOther functions: Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustmentDustproof, waterproof: Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet.Power supply: LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF)Core jaw diameter: φ55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W×18 mm (0.71 in) DDimensions and mass: 65 mm (2.56 in) W×250 mm (9.84 in) H×35 mm (1.38 in) D mm, 530 g (18.7 oz)

Hioki True RMS 2000 A AC/DC Clamp Meter CM4373
Hioki clamp meters are best-in-class measuring devices incorporating Hioki’s expertise in current sensing technology. The CM4373 is a 2000A True RMS clamp meter that features stronger jaws, broader -25℃ to 65℃ operating temperature range and IP54 dustproof and waterproof enclosure to enable professionals to work quickly in tough situations including the development, repair, and maintenance of equipment and devices such as electric vehicles. Additionally, the high-voltage DC measurement capability of up to 1700 V (*1) is ideal for the clamp maintenance inspections of electrical and solar power equipment.
CAT IV 600 V, CAT III 1000 V&nbsp;
Key Features&nbsp;
• Multiple measurement functions&nbsp;
• Automatic AC/DC function helps boost work efficiency&nbsp;
• Measure DC voltages of up to 1700 V (*1)&nbsp;
• Simultaneously measure inrush current in RMS and crest values&nbsp;
• Expanded -25 °C to 65 °C operating temperature range&nbsp;
• IP54 dustproof and waterproof enclosure *Jaws (current sensor portion): IP50 

DC Current range: 600.0 A/2000 A, Basic accuracy: ±1.3% rdg. ±0.3 A (600 A range)
AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy: ±1.3% rdg. ±0.3 A (at 600 A)
Crest factor: 600.0 A range: 3 or less, 
2000 A range: 2.84 or less
DC+AC Current range: 600.0 A/2000 A (10 Hz to 1 kHz, True RMS), Basic accuracy DC, 45-66 Hz: ±1.3% rdg. ±1.3 A (at 600 A)
DC Voltage range: 600.0 mV to 1500 V (*1), 5 ranges, Basic accuracy: ±0.5% rdg. ±0.5 mV (at 600 mV)
AC Voltage range: 6.000 V to 1000 V, 4 ranges (15 Hz to 1 kHz, True RMS), Basic accuracy 45 - 66 Hz: ±0.9% rdg. ±0.013 V (at 6 V)
DC+AC Voltage range: 6.000 V to 1000 V, 4 ranges, Basic accuracy DC, 45 - 66 Hz: ±1.0% rdg. ±0.023 V (at 6 V)
Resistance range: 600.0 Ω to 600.0 kΩ, 4 ranges, Basic accuracy: ±0.7% rdg. ±0.5 Ω (at 600 Ω)
Capacitance range: 1.000 μF to 1000 μF, 4 ranges, Basic accuracy: ±1.9% rdg. ±0.005 μF (at 1 μF)
Frequency range: 9.999 Hz to 999.9 Hz, 3 ranges, Basic accuracy: ±0.1% rdg. ±0.003 Hz (at 9.999 Hz)
Temperature (K): -40.0 to 400.0 ˚C, add temperature probe accuracy to basic accuracy of ±0.5% rdg. ±3.0 ˚C
Voltage detection: Hi: 40 V to 600 V AC, Lo: 80 V to 600 V AC, 50/60 Hz
Other functions: Automatic AC/DC detection, Plus/Minus judgement function of DC A, DC V, Max/Min/Average/PEAK MAX/ PEAK MIN value display, Filter function, Display value hold, Auto hold, Back light, Auto-power save, Buzzer sounds, Zero-adjustment
Dustproof, waterproof: Grip: IP54 (when measuring an insulated conductor only), Jaw (the current sensor portion of the instrument)/ barrier: IP50 *Risk of electric shock from the conductor being measured increases when wet.
Power supply: LR03 Alkaline battery ×2, Continuous use 45 hr (Backlight OFF)
Core jaw diameter: φ55 mm (2.17 in), Jaw dimension: 92 mm (3.62 in) W×18 mm (0.71 in) D
Dimensions and mass: 65 mm (2.56 in) W×250 mm (9.84 in) H×35 mm (1.38 in) D mm, 530 g (18.7 oz)

Data Sheet

DC Voltage

AC Voltage

Resistance

C (capacitance)

Frequency

Continuity check

Diode test

Voltage detection

Other functions

Display

Display refresh rates

Power supply

Dimensions and mass

SEEK THERMAL

Light Meters & Imaging

Lester

Hioki True Rms 2000 a Ac/dc Clamp Meter CM4373-50

hioki true rms 2000 ac/dc clamp meter cm4373-50 electrical power testing pengujian daya listrik ujian tenaga elektrik hioki/日木 交流/直流钳形表 电力测试 日木

hioki-true-rms-2000-a-ac-dc-clamp-meter-cm4373-50

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots. 

CAT IV 300 V (Current) 
CAT III 600 V (Current) 
CAT III 300 V (Voltage) 
CAT II 600 V (Voltage)  

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots. CAT IV 300 V (Current) CAT III 600 V (Current) CAT III 300 V (Voltage) CAT II 600 V (Voltage) Key Features Measure the fundamental waveform component using the average rectified method Expanded -25 °C to 65 °C operating temperature range Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires Drop proof design withstands drop from a height of 1 meter AC Current 41.99 to 1000 A, 3 ranges (50 to 60 Hz, Average rectified), Basic accuracy: ±1.5 % rdg. ±5 dgt. DC Voltage 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. AC Voltage 4.199 V to 600 V, 4 ranges (45 to 500 Hz, Average rectified), Basic accuracy: ±1.8 % rdg. ±7 dgt. Crest factor N/A Resistance 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt. Other functions Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter Display LCD, max. 4199 dgt., Display refresh rate: 400 ms Environmental protection IP40 dustproof and waterproof Power supply Coin type lithium battery (CR2032) ×1, Continuous use 120 hours Core jaw dia. φ 33 mm (1.30 in) Dimensions and mass 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz) Accessories CARRYING CASE 9398 ×1, TEST LEAD L9208 ×1, Coin type lithium battery (CR2032) ×1, Instruction manual ×1

Hioki clamp meters are best-in-class measuring devices incorporating Hioki’ s expertise in current sensing technology. The 3280-10F is an average rectifying 1000A AC clamp meter that features a broad operating temperature range of -25°C to 65°C, thin and compact clamp core and optional flexible current sensor that you can attach to let you get into the tightest spots.&nbsp;
CAT IV 300 V (Current) 
CAT III 600 V (Current) 
CAT III 300 V (Voltage) 
CAT II 600 V (Voltage)&nbsp;&nbsp;
Key Features 
Measure the fundamental waveform component using the average rectified method 
Expanded -25 °C to 65 °C operating temperature range 
Connect the CT6280 flexible sensor to measure up to 4199 A in thick or paired wires 
Drop proof design withstands drop from a height of 1 meter&nbsp;
&nbsp;AC Current 41.99 to 1000 A, 3 ranges (50 to 60 Hz, Average rectified), 
Basic accuracy: ±1.5 % rdg. ±5 dgt. 
DC Voltage 419.9 mV to 600 V, 5 ranges, Basic accuracy: ±1.0 % rdg. ±3 dgt. 
AC Voltage 4.199 V to 600 V, 4 ranges 
(45 to 500 Hz, Average rectified), 
Basic accuracy: ±1.8 % rdg. ±7 dgt. 
Crest factor N/A 
Resistance 419.9 Ω to 41.99 MΩ, 6 ranges, Basic accuracy: ±2 % rdg. ±4 dgt. 
Other functions Continuity: Buzzer sounds at 50 Ω ±40 Ω or less, Data hold, Auto power save, Drop-proof from height of 1 meter 
Display LCD, max. 4199 dgt., Display refresh rate: 400 ms 
Environmental protection IP40 dustproof and waterproof 
Power supply Coin type lithium battery (CR2032) ×1, Continuous use 120 hours 
Core jaw dia. φ 33 mm (1.30 in) 
Dimensions and mass 57 mm (2.24 in) W × 175 mm (6.89 in) H × 16 mm (0.63 in) D, 100 g (3.5 oz) 
Accessories CARRYING CASE 9398 ×1, TEST LEAD L9208 ×1, Coin type lithium battery (CR2032) ×1, Instruction manual ×1 
&nbsp;