Analog Devices

DAYTON

Finisar

FLUKE

Keysight

STABILA

Zopf

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Lifting Equipments

lifting-equipments

Hoist Component & Accessories

hoist-component-accessories

Level Measurement

level-measurement

Mechanical Parts

mechanical-parts

O Ring

o-ring

Amplifiers & Comparators

amplifiers-comparators

Operational Amplifiers

operational-amplifiers

Oscilloscopes

oscilloscopes

Machinery

machinery

Other Machines

other-machines

Electricals

electricals

Transceiver

transceiver

Keysight Technologies DSOX1202G Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 2 Analogue Channels

 Get a good read on electrical signals with this two-channel oscilloscope from Keysight Technologies. You can hook its analogue inputs up to a signal source to begin taking measurements like time, pulse count and amplitude in a flash. The device's 7-inch TFT LCD screen will display the data as a waveform graph for trouble-free viewing, helping to prevent your signals from getting crossed. Thanks to its powerful bandwidth of 70MHz, this oscilloscope will accurately read high-frequency waveforms.


• Built-in 20MHz function generator for your choice of waveform
• Capable of serial analysis with CAN, LIN, I²C, UART/RS-232 and SPI protocols for versatility
• USB 2.0 and LAN connectivity provide broad compatibility with connected devices
• Rapid update rate of 200,000 waveforms per second or higher to increase the accuracy of your signal measurements


• Sound engineering
• Automotive repair and maintenance
• Electronics production
• Scientific laboratories


What math functions can this unit perform?

This versatile unit is designed to carry out several waveform functions, such as addition, subtraction, division, multiplication, FFT and low-pass filter. 

<h3 class="md-block-header-three">Keysight Technologies DSOX1202G Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 2 Analogue Channels</h3> Get a good read on electrical signals with this two-channel oscilloscope from Keysight Technologies. You can hook its analogue inputs up to a signal source to begin taking measurements like time, pulse count and amplitude in a flash. The device&#x27;s 7-inch TFT LCD screen will display the data as a waveform graph for trouble-free viewing, helping to prevent your signals from getting crossed. Thanks to its powerful bandwidth of 70MHz, this oscilloscope will accurately read high-frequency waveforms. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Built-in 20MHz function generator for your choice of waveform • Capable of serial analysis with CAN, LIN, I²C, UART/RS-232 and SPI protocols for versatility • USB 2.0 and LAN connectivity provide broad compatibility with connected devices • Rapid update rate of 200,000 waveforms per second or higher to increase the accuracy of your signal measurements <h3 class="md-block-header-three">Applications</h3>• Sound engineering • Automotive repair and maintenance • Electronics production • Scientific laboratories <h3 class="md-block-header-three">What math functions can this unit perform?</h3>This versatile unit is designed to carry out several waveform functions, such as addition, subtraction, division, multiplication, FFT and low-pass filter.

<h3>Keysight Technologies DSOX1202G Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 2 Analogue Channels</h3>
&nbsp;Get a good read on electrical signals with this two-channel oscilloscope from Keysight Technologies. You can hook its analogue inputs up to a signal source to begin taking measurements like time, pulse count and amplitude in a flash. The device's 7-inch TFT LCD screen will display the data as a waveform graph for trouble-free viewing, helping to prevent your signals from getting crossed. Thanks to its powerful bandwidth of 70MHz, this oscilloscope will accurately read high-frequency waveforms. 

<h3>Features &amp; Benefits</h3>
• Built-in 20MHz function generator for your choice of waveform 
• Capable of serial analysis with CAN, LIN, I²C, UART/RS-232 and SPI protocols for versatility 
• USB 2.0 and LAN connectivity provide broad compatibility with connected devices 
• Rapid update rate of 200,000 waveforms per second or higher to increase the accuracy of your signal measurements 

<h3>Applications</h3>
• Sound engineering 
• Automotive repair and maintenance 
• Electronics production 
• Scientific laboratories 

<h3>What math functions can this unit perform?</h3>
This versatile unit is designed to carry out several waveform functions, such as addition, subtraction, division, multiplication, FFT and low-pass filter.&nbsp;

Contains SVHC - 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME) - CAS No. 110-71-4

Datasheet - EDUX1052G

UN38.3 Lithium Battery Test Summary

User Manual

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

keysight technologies dsox1202g infiniivision 1000 series, 70mhz bench oscilloscope, analogue channels osiloskop bangku 70mhz, saluran analog oscilloscopes keysight/是德科技 系列，70mhz 台式示波器，2 个模拟通道 是德科技

keysight-technologies-dsox1202g-infiniivision-1000-x-series-70mhz-bench-oscilloscope-2-analogue-channels

Keysight Technologies DSOX1204G Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 4 Analogue Channels

 This 6-in-1 oscilloscope from Keysight Technologies delivers precise waveforms for convenient analysis. It combines full oscilloscope functionality with an integrated 20MHz function generator, hardware-based serial protocol triggering, a frequency response analyser, a digital voltmeter and a frequency counter. This means you can rely on this device for use in a wide array of applications. For flexible use in the field, a standard LAN port supports remote web-based front panel control, making it easy to save data and images.


• Update rate of 50,000 waveforms per second for real-time results
• Four analog channels let you compare multiple waveforms simultaneously
• Intuitive user interface and built-in help and training signals for straightforward operation
• 7-inch TFT LCD screen to clearly display your results


• Sound engineering
• Electronics manufacturing
• Medical equipment


Can I use this oscilloscope to measure high-frequency signals?

While this model can accurately display signals at frequencies as high as 70MHz, you can easily upgrade the standard measuring range to 100MHz or even 200MHz if you need to capture waveforms with higher frequencies. 

<h3 class="md-block-header-three">Keysight Technologies DSOX1204G Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 4 Analogue Channels</h3> This 6-in-1 oscilloscope from Keysight Technologies delivers precise waveforms for convenient analysis. It combines full oscilloscope functionality with an integrated 20MHz function generator, hardware-based serial protocol triggering, a frequency response analyser, a digital voltmeter and a frequency counter. This means you can rely on this device for use in a wide array of applications. For flexible use in the field, a standard LAN port supports remote web-based front panel control, making it easy to save data and images. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Update rate of 50,000 waveforms per second for real-time results • Four analog channels let you compare multiple waveforms simultaneously • Intuitive user interface and built-in help and training signals for straightforward operation • 7-inch TFT LCD screen to clearly display your results <h3 class="md-block-header-three">Applications</h3>• Sound engineering • Electronics manufacturing • Medical equipment <h3 class="md-block-header-three">Can I use this oscilloscope to measure high-frequency signals?</h3>While this model can accurately display signals at frequencies as high as 70MHz, you can easily upgrade the standard measuring range to 100MHz or even 200MHz if you need to capture waveforms with higher frequencies.

<h3>Keysight Technologies DSOX1204G Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 4 Analogue Channels</h3>
&nbsp;This 6-in-1 oscilloscope from Keysight Technologies delivers precise waveforms for convenient analysis. It combines full oscilloscope functionality with an integrated 20MHz function generator, hardware-based serial protocol triggering, a frequency response analyser, a digital voltmeter and a frequency counter. This means you can rely on this device for use in a wide array of applications. For flexible use in the field, a standard LAN port supports remote web-based front panel control, making it easy to save data and images. 

<h3>Features &amp; Benefits</h3>
• Update rate of 50,000 waveforms per second for real-time results 
• Four analog channels let you compare multiple waveforms simultaneously 
• Intuitive user interface and built-in help and training signals for straightforward operation 
• 7-inch TFT LCD screen to clearly display your results 

<h3>Applications</h3>
• Sound engineering 
• Electronics manufacturing 
• Medical equipment 

<h3>Can I use this oscilloscope to measure high-frequency signals?</h3>
While this model can accurately display signals at frequencies as high as 70MHz, you can easily upgrade the standard measuring range to 100MHz or even 200MHz if you need to capture waveforms with higher frequencies.&nbsp;

Datasheet DSOX1204G

Catalogue - Oscilloscopes

Manual - 1200 X-Series

keysight technologies dsox1204g infiniivision 1000 series, 70mhz bench oscilloscope, analogue channels osiloskop bangku 70mhz, saluran analog oscilloscopes keysight/是德科技 系列，70mhz 台式示波器，4 个模拟通道 是德科技

keysight-technologies-dsox1204g-infiniivision-1000-x-series-70mhz-bench-oscilloscope-4-analogue-channels

Keysight Technologies DSOX1202A Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 2 Analogue Channels

 Need a way to accurately measure and analyse high-frequency signals with a bandwidth of up to 70MHz? Turn to this benchtop oscilloscope from Keysight Technologies. It comes with add, subtract, multiply, divide, FFT and low-pass filter functionality, so you'll have all the tools you need to perform a detailed evaluation. An update rate of 200,000 waveforms per second means it delivers real-time results. Its two analog channels allow you to compare waveforms side-by-side for enhanced analytical capacity.


• Built-in digital voltmeter and frequency counter for flexible measurement options
• USB 2.0 and LAN connectivity for ease of connection and data transfer to a PC
• TFT LCD screen displays your data clearly for ease of reading


• Electronic equipment maintenance
• Laboratory work
• Telecommunications


What support is available to help me get the most out of this product?

Thanks to its intuitive user interface, this oscilloscope is easy to operate. To make sure new users can operate it with confidence, a built-in education kit offers training signals and a downloadable guide. 

<h3 class="md-block-header-three">Keysight Technologies DSOX1202A Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 2 Analogue Channels</h3> Need a way to accurately measure and analyse high-frequency signals with a bandwidth of up to 70MHz? Turn to this benchtop oscilloscope from Keysight Technologies. It comes with add, subtract, multiply, divide, FFT and low-pass filter functionality, so you&#x27;ll have all the tools you need to perform a detailed evaluation. An update rate of 200,000 waveforms per second means it delivers real-time results. Its two analog channels allow you to compare waveforms side-by-side for enhanced analytical capacity. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Built-in digital voltmeter and frequency counter for flexible measurement options • USB 2.0 and LAN connectivity for ease of connection and data transfer to a PC • TFT LCD screen displays your data clearly for ease of reading <h3 class="md-block-header-three">Applications</h3>• Electronic equipment maintenance • Laboratory work • Telecommunications <h3 class="md-block-header-three">What support is available to help me get the most out of this product?</h3>Thanks to its intuitive user interface, this oscilloscope is easy to operate. To make sure new users can operate it with confidence, a built-in education kit offers training signals and a downloadable guide.

<h3>Keysight Technologies DSOX1202A Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 2 Analogue Channels</h3>
&nbsp;Need a way to accurately measure and analyse high-frequency signals with a bandwidth of up to 70MHz? Turn to this benchtop oscilloscope from Keysight Technologies. It comes with add, subtract, multiply, divide, FFT and low-pass filter functionality, so you'll have all the tools you need to perform a detailed evaluation. An update rate of 200,000 waveforms per second means it delivers real-time results. Its two analog channels allow you to compare waveforms side-by-side for enhanced analytical capacity. 

<h3>Features &amp; Benefits</h3>
• Built-in digital voltmeter and frequency counter for flexible measurement options 
• USB 2.0 and LAN connectivity for ease of connection and data transfer to a PC 
• TFT LCD screen displays your data clearly for ease of reading 

<h3>Applications</h3>
• Electronic equipment maintenance 
• Laboratory work 
• Telecommunications 

<h3>What support is available to help me get the most out of this product?</h3>
Thanks to its intuitive user interface, this oscilloscope is easy to operate. To make sure new users can operate it with confidence, a built-in education kit offers training signals and a downloadable guide.&nbsp;

keysight technologies dsox1202a infiniivision 1000 series, 70mhz bench oscilloscope, analogue channels osiloskop bangku 70mhz, saluran analog oscilloscopes keysight/是德科技 系列，70mhz 台式示波器，2 个模拟通道 是德科技

keysight-technologies-dsox1202a-infiniivision-1000-x-series-70mhz-bench-oscilloscope-2-analogue-channels

NBR 70, shore A, B1000 common metric size , 2.7 mm(CS) x 10.5 mm(ID) x 15.9 mm(OD)

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

<h3 class="md-block-header-three">NBR 70, shore A, B1000 common metric size , 2.7 mm(CS) x 10.5 mm(ID) x 15.9 mm(OD)</h3>Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>NBR 70, shore A, B1000 common metric size , 2.7 mm(CS) x 10.5 mm(ID) x 15.9 mm(OD)</h3>
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cev1h"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/DmU4MMN5fPFBF2~SUnGVrQ.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cev1h" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

Nbr 70, Shore A, 2.7 Mm(cs) X 10.5 Mm(id) X 15.9 Mm(od)

nbr 70, shore a, 2.7 mm(cs) 10.5 mm(id) 15.9 mm(od) pantai 2,7 10,5 15,9 ring o-ring oem gelang oem/oem代工 70，肖氏 a，2.7 毫米（壳）x 毫米（内径）x 毫米（外径） o型圈 oem代工

nbr-70-shore-a-2-7-mm-cs-x-10-5-mm-id-x-15-9-mm-od

Keysight Technologies DSOX1204A Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 4 Analogue Channels

 The DSOX1204A is a digital storage oscilloscope (DSO) from Keysight's InfiniiVision 1000 X-Series. It's designed for a wide range of electronic testing and debugging tasks, offering a balance of performance, ease of use, and affordability for engineers, technicians, and educators.


Measure and process electrical signals using this oscilloscope from Keysight Technologies. It displays signals in graphical form for ease of data analysis. The component has a bandwidth of 70MHz, so you can depend on it for fast data transfer. Thanks to its compact dimensions of 165 (H) x 314 (W) x 130mm (D), this device will take up minimal space in your setup. The 7-inch LCD screen makes it easy to see your readings clearly. A fast update rate of 50,000 waveforms per second makes it easy to troubleshoot and detect errors.


• USB and LAN ports for ease of data transfer
• Capacitive touchscreen for easy and smooth operation
• Four analog channels for flexible connection to multiple devices
• Low-pass filter to reduce the risk of interference


The DSOX1204A is a versatile digital oscilloscope suitable for a variety of applications, including education, research, and general-purpose testing.


• General-purpose electronic testing
• Embedded system debugging
• Power electronics analysis
• Educational and training environments
• Automotive diagnostics
• Circuit design and validation


What accessories is this component supplied with?

This component is supplied with four switchable passive probes, interface language support and a localised power cord. This makes it easy to configure and link to compatible machinery. 

<h3 class="md-block-header-three">Keysight Technologies DSOX1204A Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 4 Analogue Channels</h3> The DSOX1204A is a digital storage oscilloscope (DSO) from Keysight&#x27;s InfiniiVision 1000 X-Series. It&#x27;s designed for a wide range of electronic testing and debugging tasks, offering a balance of performance, ease of use, and affordability for engineers, technicians, and educators. Measure and process electrical signals using this oscilloscope from Keysight Technologies. It displays signals in graphical form for ease of data analysis. The component has a bandwidth of 70MHz, so you can depend on it for fast data transfer. Thanks to its compact dimensions of 165 (H) x 314 (W) x 130mm (D), this device will take up minimal space in your setup. The 7-inch LCD screen makes it easy to see your readings clearly. A fast update rate of 50,000 waveforms per second makes it easy to troubleshoot and detect errors. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• USB and LAN ports for ease of data transfer • Capacitive touchscreen for easy and smooth operation • Four analog channels for flexible connection to multiple devices • Low-pass filter to reduce the risk of interference <h3 class="md-block-header-three">Applications</h3>The DSOX1204A is a versatile digital oscilloscope suitable for a variety of applications, including education, research, and general-purpose testing. • General-purpose electronic testing • Embedded system debugging • Power electronics analysis • Educational and training environments • Automotive diagnostics • Circuit design and validation <h3 class="md-block-header-three">What accessories is this component supplied with?</h3>This component is supplied with four switchable passive probes, interface language support and a localised power cord. This makes it easy to configure and link to compatible machinery.

<h3>Keysight Technologies DSOX1204A Infiniivision 1000 X Series, 70MHz Bench Oscilloscope, 4 Analogue Channels</h3>
&nbsp;The DSOX1204A is a digital storage oscilloscope (DSO) from Keysight's InfiniiVision 1000 X-Series. It's designed for a wide range of electronic testing and debugging tasks, offering a balance of performance, ease of use, and affordability for engineers, technicians, and educators. 

Measure and process electrical signals using this oscilloscope from Keysight Technologies. It displays signals in graphical form for ease of data analysis. The component has a bandwidth of 70MHz, so you can depend on it for fast data transfer. Thanks to its compact dimensions of 165 (H) x 314 (W) x 130mm (D), this device will take up minimal space in your setup. The 7-inch LCD screen makes it easy to see your readings clearly. A fast update rate of 50,000 waveforms per second makes it easy to troubleshoot and detect errors. 

<h3>Features &amp; Benefits</h3>
• USB and LAN ports for ease of data transfer 
• Capacitive touchscreen for easy and smooth operation 
• Four analog channels for flexible connection to multiple devices 
• Low-pass filter to reduce the risk of interference 

<h3>Applications</h3>
The DSOX1204A is a versatile digital oscilloscope suitable for a variety of applications, including education, research, and general-purpose testing. 

• General-purpose electronic testing 
• Embedded system debugging 
• Power electronics analysis 
• Educational and training environments 
• Automotive diagnostics 
• Circuit design and validation 

<h3>What accessories is this component supplied with?</h3>
This component is supplied with four switchable passive probes, interface language support and a localised power cord. This makes it easy to configure and link to compatible machinery.&nbsp;

Datasheet DSOX1204A

keysight technologies dsox1204a infiniivision 1000 series, 70mhz bench oscilloscope, analogue channels osiloskop bangku 70mhz, saluran analog oscilloscopes keysight/是德科技 系列，70mhz 台式示波器，4 个模拟通道 是德科技

keysight-technologies-dsox1204a-infiniivision-1000-x-series-70mhz-bench-oscilloscope-4-analogue-channels

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

ORING AS568 AS455 ID 329.57 X CS 6.99Material : Nitrile (NBR) 70 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/uBcJivweO61J8qA~DFyXg3.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS455
&nbsp;ID 329.57 X CS 6.99
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:ebuec"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/uBcJivweO61J8qA~DFyXg3.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="ebuec" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS455 ID 329.57 X CS 6.99 Nitrile (NBR) 70 Shore

oring as568 as455 id 329.57 cs 6.99 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 6.99腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as455-id-329-57-x-cs-6-99-nitrile-nbr-70-shore

ORING AS568 AS387 ID 456.06 x CS 5.33Material : Nitrile (NBR) 70 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS387
&nbsp;ID 456.06 x CS 5.33
Material : Nitrile (NBR) 70 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bngab"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bngab" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS387 ID 456.06 x CS 5.33 Nitrile (NBR) 70 Shore

oring as568 as387 id 456.06 cs 5.33 nitrile (nbr) 70 shore 456,06 ring o-ring oem gelang oem/oem代工 5.33腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as387-id-456-06-x-cs-5-33-nitrile-nbr-70-shore

kelvin toh

Electrical Accessories

Communication Devices

Takeiki

freeSourcingService

Finisar - 1310nm Dfb, Pin, 10GBASE-LR/LW, 1000BASE-LX, 1G/10G dual-rate Transceiver, Limiting Interface, RoHS/lead Free, Single Mode, Sfp+ Footprint, Lc Connector, -5/70°C Operation, 10km

finisar 1310nm dfb, pin, 10gbase-lr/lw, 1000base-lx, 1g/10g dual-rate transceiver, limiting interface, rohs/lead free, single mode, sfp+ footprint, lc connector, -5/70°c operation, 10km 10gbase-lr lw, transceiver tingkat ganda 1g 10g, antarmuka pembatas, rohs bebas timah, mode tunggal, sfp jejak, konektor lc, operasi -5 70 c, 10km pemancar 10g lead finisar-1310nm dfb，引脚，10gbase-lr lw，1000base-lx，1g 10g双速率收发器，限制接口，rohs /无铅，单模，sfp +封装，lc连接器，-5 70°c操作， 10公里 收发器 菲尼萨

finisar-1310nm-dfb-pin-10gbase-lr-lw-1000base-lx-1g-10g-dual-rate-transceiver-limiting-interface-rohs-lead-free-single-mode-sfp-footprint-lc-connector-5-70-c-operation-10km

Finisar - 850nm Vcsel, Pin, 10GBASE-SR/SW, 1000BASE-SX, 1G/10G dual-rate Transceiver, Limiting Interface, RoHS/lead Free, Multimode, Sfp+ Footprint, Lc Connector, 0/70°C Operation, 82m/300m

finisar 850nm vcsel, pin, 10gbase-sr/sw, 1000base-sx, 1g/10g dual-rate transceiver, limiting interface, rohs/lead free, multimode, sfp+ footprint, lc connector, 0/70°c operation, 82m/300m 10gbase-sr sw, 1g 10g antarmuka pembatas, rohs bebas timah, sfp jejak, konektor lc, operasi 0/70 c, 82m 300 transceiver pemancar interface limiting, lead 300m finisar-850nm vcsel，引脚，10gbase-sr sw，1000base-sx，1g 10g双速率收发器，限制接口，rohs /无铅，多模，sfp +封装，lc连接器，0/70°c操作，82m 收发器 菲尼萨

finisar-850nm-vcsel-pin-10gbase-sr-sw-1000base-sx-1g-10g-dual-rate-transceiver-limiting-interface-rohs-lead-free-multimode-sfp-footprint-lc-connector-0-70-c-operation-82m-300m

STABILA SPIRIT LEVEL 70 - 400MM (2282)MADE IN GERMANY

STABILA SPIRIT LEVEL 70 - 400MM (2282)
MADE IN GERMANY

Paul Ang

STANLEY

MAKITA

BOSCH

Werner

WIHA

DEWALT

Other Tools

Ladders & Platforms

Door Hardware & Locks

Other Power Tools

Other Measuring Tools

Other Fittings

Drills, Impact Drivers & Wrenches

Power Tools Accessories

Gardening Hand Tools

Desk stationery

PowerFit Industrial Pte Ltd

Stabila Spirit Level Magnetic 70M - 300MM - 1500MM

stabila spirit level magnetic 70m 300mm 1500mm magnetik measurement pengukuran pengukur aras stabila/西德宝 磁性水平仪 西德宝

stabila-spirit-level-magnetic-70m-300mm-1500mm

300mm

600mm

1000mm

1500mm

LENGTH

Fluke SMFT-1000 Multifunction Tester, 1000V , Earth Resistance Measurement With Wireless

 Put your solar panels through their paces with this multifunction PV tester kit from FLUKE. You can use it to quickly and accurately measure a host of variables on your photovoltaic panels, from DC voltage and current to maximum power point and power output. The unit's integrated I-V curve tracer lets you compare manufacturer specs with your specific panel instantly in the form of a clear graphic. This makes it easy to spot any issues that could be limiting performance. For a full analysis, you can then run all data through the TruTest software.


• Suitable for test voltages up to 1000V, for versatility
• Includes a professional tool backpack for easy carrying
• MC4 test leads let you easily connect the kit to your solar panels
• TP1000 test probe with remote test button lets you take readings in hard-to-reach locations
• Wireless interface offers freedom of movement


• Renewable energy industry
• Construction industry
• Farms


Regular testing of your solar panels helps to ensure your system is running safely. It also helps you identify and rectify any issues that might be preventing your PV panels from working optimally.


Fluke SMFT-1000-BP Professional Tool Backpack
SMFT-1000 Multifunction PV Analyser with accessories
IRR2-BT Wireless Solar Irradiance Meter Pro with accessories
i100 AC/DC Current Clamp 100 A, TPAK Magnet set
TP1000 Test Probe with Remote Test Button
TL1000 Test Lead Set
TL1000-MC4 Test Lead Set
TL1000/30M Test Lead on Reel
Coupler set
PVLEAD3 MC4 Solar Clamp Test Lead Set
TruTest™ Advanced Data Management and Reporting Software 

<h3 class="md-block-header-three">Fluke SMFT-1000 Multifunction Tester, 1000V , Earth Resistance Measurement With Wireless</h3> Put your solar panels through their paces with this multifunction PV tester kit from FLUKE. You can use it to quickly and accurately measure a host of variables on your photovoltaic panels, from DC voltage and current to maximum power point and power output. The unit&#x27;s integrated I-V curve tracer lets you compare manufacturer specs with your specific panel instantly in the form of a clear graphic. This makes it easy to spot any issues that could be limiting performance. For a full analysis, you can then run all data through the TruTest software. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Suitable for test voltages up to 1000V, for versatility • Includes a professional tool backpack for easy carrying • MC4 test leads let you easily connect the kit to your solar panels • TP1000 test probe with remote test button lets you take readings in hard-to-reach locations • Wireless interface offers freedom of movement <h3 class="md-block-header-three">Applications</h3>• Renewable energy industry • Construction industry • Farms <h3 class="md-block-header-three">Why do I need to test my solar panels?</h3>Regular testing of your solar panels helps to ensure your system is running safely. It also helps you identify and rectify any issues that might be preventing your PV panels from working optimally. <h3 class="md-block-header-three">Supplied with</h3>Fluke SMFT-1000-BP Professional Tool Backpack SMFT-1000 Multifunction PV Analyser with accessories IRR2-BT Wireless Solar Irradiance Meter Pro with accessories i100 AC/DC Current Clamp 100 A, TPAK Magnet set TP1000 Test Probe with Remote Test Button TL1000 Test Lead Set TL1000-MC4 Test Lead Set TL1000/30M Test Lead on Reel Coupler set PVLEAD3 MC4 Solar Clamp Test Lead Set TruTest™ Advanced Data Management and Reporting Software

<h3>Fluke SMFT-1000 Multifunction Tester, 1000V , Earth Resistance Measurement With Wireless</h3>
&nbsp;Put your solar panels through their paces with this multifunction PV tester kit from FLUKE. You can use it to quickly and accurately measure a host of variables on your photovoltaic panels, from DC voltage and current to maximum power point and power output. The unit's integrated I-V curve tracer lets you compare manufacturer specs with your specific panel instantly in the form of a clear graphic. This makes it easy to spot any issues that could be limiting performance. For a full analysis, you can then run all data through the TruTest software. 

<h3>Features &amp; Benefits</h3>
• Suitable for test voltages up to 1000V, for versatility 
• Includes a professional tool backpack for easy carrying 
• MC4 test leads let you easily connect the kit to your solar panels 
• TP1000 test probe with remote test button lets you take readings in hard-to-reach locations 
• Wireless interface offers freedom of movement 

<h3>Applications</h3>
• Renewable energy industry 
• Construction industry 
• Farms 

<h3>Why do I need to test my solar panels?</h3>
Regular testing of your solar panels helps to ensure your system is running safely. It also helps you identify and rectify any issues that might be preventing your PV panels from working optimally. 

<h3>Supplied with</h3>
Fluke SMFT-1000-BP Professional Tool Backpack 
SMFT-1000 Multifunction PV Analyser with accessories 
IRR2-BT Wireless Solar Irradiance Meter Pro with accessories 
i100 AC/DC Current Clamp 100 A, TPAK Magnet set 
TP1000 Test Probe with Remote Test Button 
TL1000 Test Lead Set 
TL1000-MC4 Test Lead Set 
TL1000/30M Test Lead on Reel 
Coupler set 
PVLEAD3 MC4 Solar Clamp Test Lead Set 
TruTest™ Advanced Data Management and Reporting Software&nbsp;

fluke smft-1000 multifunction tester, 1000v earth resistance measurement wireless 1000v, pengukuran resistansi bumi dengan nirkabel electrical power testing pengujian daya listrik penguji pelbagai fungsi, rintangan wayarles ujian tenaga elektrik fluke/福禄克 多功能测试仪，1000v，无线接地电阻测量 电力测试 福禄克

fluke-smft-1000-multifunction-tester-1000v-earth-resistance-measurement-with-wireless

Working position horizontal and vertical (optional)

<h3 class="md-block-header-three">ZOPF Ring Bending Machine ZB 70/2M</h3><h3 class="md-block-header-three">Features :</h3><ul class="md-block-unordered-list-item"><li>Two driven rollers, knurled surface</li><li>Manual adjusting of the center roller</li><li>Working position horizontal and vertical (optional)</li><li>Complete with standard roller set and foot pedal</li></ul><h3 class="md-block-header-three">Technical Data :</h3><ul class="md-block-unordered-list-item"><li>Shaft Diameter : 40 mm</li><li>roll diameter : 152 /162 mm</li><li>shaft rpm : 8,5 U/min</li><li>Voltage : 400/50 V/Hz</li><li>Driving Motor : 1,1 kW</li><li>Adjusting Way : 120 mm</li><li>Weight : 395 kg</li><li>Measurements lxbxw : 900x600x1000 mm</li></ul>

<h3>ZOPF Ring Bending Machine ZB 70/2M</h3>
<h3>Features :</h3>
<ul>
<li>Two driven rollers, knurled surface</li>
<li>Manual adjusting of the center roller</li>
<li>Working position horizontal and vertical (optional)</li>
<li>Complete with standard roller set and foot pedal</li>
</ul>
<h3>Technical Data :</h3>
<ul>
<li>Shaft Diameter : 40 mm</li>
<li>roll diameter : 152 /162 mm</li>
<li>shaft rpm : 8,5 U/min</li>
<li>Voltage : 400/50 V/Hz</li>
<li>Driving Motor : 1,1 kW</li>
<li>Adjusting Way : 120 mm</li>
<li>Weight : 395 kg</li>
<li>Measurements lxbxw : 900x600x1000 mm</li>
</ul>