FLUKE

MAHA

MULTICOMP PRO

Omron

PCE Instruments

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Calibrators

calibrators

Electrical Power Testing

electrical-power-testing

Laboratory Consumable & Apparatus

laboratory-consumable-apparatus

Laboratory Chemicals

laboratory-chemicals

Electricals

electricals

Power Relay

power-relay

Pressure Measurement

pressure-measurement

Technical Data Sheet (231.81KB) EN

MULTICOMP

Surface Mount Resistors

Multilayer Ceramic Capacitors

Through Hole Resistors

Hook Up Wires

Junction & Enclosure Box

Circular Connectors

PCB Headers

Crystal Units

Fixed Resistors

Heat-Shrinkable Tube

Element14

buyerIntroduction

Multicomp Pro MP770271 Test Lead, 10A, 60V, 1.524M, Red

multicomp pro mp770271 test lead, 10a, 60v, 1.524m, red timbal uji mp770271, 1,524m, merah electrical power testing pengujian daya listrik ujian tenaga elektrik 测试引线，10a，60v，1.524m，红色 电力测试 多计算机专业版

multicomp-pro-mp770271-test-lead-10a-60v-1-524m-red

PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter 

PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.

The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.

When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust.

 – Particulate matter (PM) channels: PM 2.5, PM 10
– Particle sizes (in micrometers): 2.5 µm, 10 µm
– Temperature measuring range: 0 … +50 °C / +32 … +122 °F
– Humidity measuring range: 0 … 100 % RH
– 2″ full-color LCD with user-friendly graphics
– 220 x 176 pixel display resolution
– Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)
– Powered by rechargeable battery or AC power (via USB port)
– Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go
– Includes a stand for attaching to the thread on the back of the device
– Features an internal memory for storing up to 5000 data sets
– Saved data is stamped with the time and date
– Takes measurements even while the battery is charging
– Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes
– Programmable alarm and automatic power-off battery-saving functionality 

<h3 class="md-block-header-three">PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter </h3>PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust. – Particulate matter (PM) channels: PM 2.5, PM 10 – Particle sizes (in micrometers): 2.5 µm, 10 µm – Temperature measuring range: 0 … +50 °C / +32 … +122 °F – Humidity measuring range: 0 … 100 % RH – 2″ full-color LCD with user-friendly graphics – 220 x 176 pixel display resolution – Displays temperature in degrees Celsius (°C) or Fahrenheit (°F) – Powered by rechargeable battery or AC power (via USB port) – Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go – Includes a stand for attaching to the thread on the back of the device – Features an internal memory for storing up to 5000 data sets – Saved data is stamped with the time and date – Takes measurements even while the battery is charging – Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes – Programmable alarm and automatic power-off battery-saving functionality

<h3>PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter&nbsp;</h3>
PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.
The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.
When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust.
&nbsp;– Particulate matter (PM) channels: PM 2.5, PM 10 
– Particle sizes (in micrometers): 2.5 µm, 10 µm 
– Temperature measuring range: 0 … +50 °C / +32 … +122 °F 
– Humidity measuring range: 0 … 100 % RH 
– 2″ full-color LCD with user-friendly graphics 
– 220 x 176 pixel display resolution 
– Displays temperature in degrees Celsius (°C) or Fahrenheit (°F) 
– Powered by rechargeable battery or AC power (via USB port) 
– Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go 
– Includes a stand for attaching to the thread on the back of the device 
– Features an internal memory for storing up to 5000 data sets 
– Saved data is stamped with the time and date 
– Takes measurements even while the battery is charging 
– Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes 
– Programmable alarm and automatic power-off battery-saving functionality&nbsp;

Extech

ACISION

Center

TRIPLETT

MEGGER

AMPROBE

Fluke Networks

Piecal

Multimeters

Other Measuring Tools

Clamp Meters

Industrial Thermometer

Humidity & Temperature

Sound & Vibration Meters

Thermal Imaging Cameras

Multimeter Leads

Light Meters & Imaging

CETM

Pce Instruments PCE-MPC 10 Air Quality Particle Counting Meter

pce instruments pce-mpc 10 air quality particle counting meter alat pengukur partikel kualitas udara dari meters instrumen kira zarah kualiti instruments/四氯乙烯仪器 空气质量粒子计数器 空气质量计 四氯乙烯仪器

pce-instruments-pce-mpc-10-air-quality-particle-counting-meter

Fluke TL175E Test Lead, Cat Ii, Cat Iii, 10A

Safety Category	CAT II, CAT II 1000 V, CAT III 1000V

Patented twist top test probes to extend or reduce tip exposure
Probes always show correct category rating for tip exposure being used
Includes removable 4 mm lantern tips
Compatible with all instruments that accept standard 4 mm shrouded banana plugs
EN61010-031 safety ratings CAT III 1000 V, CAT IV 600 V, CAT II 1000 V, 10 A max

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Multimeter Leads, Test Lead Type, 10A Current Rating - TL175E

In need of multitasking testing leads that can easily be adapted for different applications? These TwistGuard multimeter leads from FLUKE are reliable all-rounders. With a quick turn, you can change the exposed probe tip length from 4 up to 19mm. A contrasting inner cable colour lets you know when to replace the product, so there's no need for wear and tear to jeopardise safety. As they've been tested for strain relief to over 30,000 bends without any problems, you can rest assured that these leads are built to work as hard as you do.

• Cable's 1.2m length gives plenty of reach when testing, without pulling on the multimeter
• Standard 4mm banana plugs for compatibility with most FLUKE multimeters
• Double-insulated silicone housing for flexibility in cold temperatures

• Energy sector
• Telecommunications industry
• Manufacturing equipment
• Electronic testing 

<h3 class="md-block-header-three">Fluke TL175E Test Lead, Cat Ii, Cat Iii, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead</li><li>Connector Type	Banana Plug</li><li>Lead Length	1.2m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000V</li><li>Safety Category	CAT II, CAT II 1000 V, CAT III 1000V</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Level	CAT II, CAT III</li></ul>Features &amp; BenefitsPatented twist top test probes to extend or reduce tip exposure Probes always show correct category rating for tip exposure being used Includes removable 4 mm lantern tips Compatible with all instruments that accept standard 4 mm shrouded banana plugs EN61010-031 safety ratings CAT III 1000 V, CAT IV 600 V, CAT II 1000 V, 10 A maxWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.StandardsEN61010-031FLUKE Multimeter Leads, Test Lead Type, 10A Current Rating - TL175EIn need of multitasking testing leads that can easily be adapted for different applications? These TwistGuard multimeter leads from FLUKE are reliable all-rounders. With a quick turn, you can change the exposed probe tip length from 4 up to 19mm. A contrasting inner cable colour lets you know when to replace the product, so there&#x27;s no need for wear and tear to jeopardise safety. As they&#x27;ve been tested for strain relief to over 30,000 bends without any problems, you can rest assured that these leads are built to work as hard as you do.Features &amp; Benefits• Cable&#x27;s 1.2m length gives plenty of reach when testing, without pulling on the multimeter • Standard 4mm banana plugs for compatibility with most FLUKE multimeters • Double-insulated silicone housing for flexibility in cold temperaturesApplications• Energy sector • Telecommunications industry • Manufacturing equipment • Electronic testing

<h3>Fluke TL175E Test Lead, Cat Ii, Cat Iii, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead</li>
<li>Connector Type	Banana Plug</li>
<li>Lead Length	1.2m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000V</li>
<li>Safety Category	CAT II, CAT II 1000 V, CAT III 1000V</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Level	CAT II, CAT III</li>
</ul>
Features &amp; Benefits
Patented twist top test probes to extend or reduce tip exposure 
Probes always show correct category rating for tip exposure being used 
Includes removable 4 mm lantern tips 
Compatible with all instruments that accept standard 4 mm shrouded banana plugs 
EN61010-031 safety ratings CAT III 1000 V, CAT IV 600 V, CAT II 1000 V, 10 A max
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
Standards
EN61010-031
FLUKE Multimeter Leads, Test Lead Type, 10A Current Rating - TL175E
In need of multitasking testing leads that can easily be adapted for different applications? These TwistGuard multimeter leads from FLUKE are reliable all-rounders. With a quick turn, you can change the exposed probe tip length from 4 up to 19mm. A contrasting inner cable colour lets you know when to replace the product, so there's no need for wear and tear to jeopardise safety. As they've been tested for strain relief to over 30,000 bends without any problems, you can rest assured that these leads are built to work as hard as you do.
Features &amp; Benefits
• Cable's 1.2m length gives plenty of reach when testing, without pulling on the multimeter 
• Standard 4mm banana plugs for compatibility with most FLUKE multimeters 
• Double-insulated silicone housing for flexibility in cold temperatures
Applications
• Energy sector 
• Telecommunications industry 
• Manufacturing equipment 
• Electronic testing&nbsp;

TwistGuard Premium Test Leads

Instruction Sheet - TL175

RS Pro

SCHNEIDER ELECTRIC

Abus

Screw

O Ring

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Electrical Wire 

RS Components ETH SG

fluke tl175e test lead, cat ii, iii, 10a kabel uji tl175e, electrical power testing pengujian daya listrik ujian tenaga elektrik fluke/福禄克 测试导线，cat ii，cat iii，10a 电力测试 福禄克

fluke-tl175e-test-lead-cat-ii-cat-iii-10a

Multicomp Pro MP770270 Test Lead, 10A, 60V, 1.524M, Black

multicomp pro mp770270 test lead, 10a, 60v, 1.524m, black timbal uji mp770270, 1,524m, hitam electrical power testing pengujian daya listrik ujian tenaga elektrik 测试引线，10a，60v，1.524m，黑色 电力测试 多计算机专业版

multicomp-pro-mp770270-test-lead-10a-60v-1-524m-black

Technical Data Sheet (227.25KB) EN

Multicomp Pro MP770282 Test Lead, 10A, 60V, 914.4MM, Black

multicomp pro mp770282 test lead, 10a, 60v, 914.4mm, black timbal uji mp770282, hitam electrical power testing pengujian daya listrik pemimpin ujian, ujian tenaga elektrik 测试引线，10a，60v，914.4mm，黑色 电力测试 多计算机专业版

multicomp-pro-mp770282-test-lead-10a-60v-914-4mm-black

Multicomp Pro MP770262 Test Lead, 10A, 60V, 304.8MM, Black

multicomp pro mp770262 test lead, 10a, 60v, 304.8mm, black timbal uji mp770262, hitam electrical power testing pengujian daya listrik pemimpin ujian, ujian tenaga elektrik 测试引线，10a，60v，304.8mm，黑色 电力测试 多计算机专业版

multicomp-pro-mp770262-test-lead-10a-60v-304-8mm-black

Multicomp Pro MP770283 Test Lead, 10A, 60V, 914.4MM, Red

multicomp pro mp770283 test lead, 10a, 60v, 914.4mm, red timbal uji mp770283, merah electrical power testing pengujian daya listrik pemimpin ujian, ujian tenaga elektrik 测试引线，10a，60v，914.4mm，红色 电力测试 多计算机专业版

multicomp-pro-mp770283-test-lead-10a-60v-914-4mm-red

Safety Data Sheet

Pamela Lim

MahaChem

Laboratory Supplies

Glass Equipments & Accessories

Centrifuge Tubes

Pipet tips

Laboratory Bottles

Filter pipet tips

Micro Centrifuge Tube

Laboratory Beakers

Ammonium Test (1.14752.0001) (set)

ammonium test (1.14752.0001) (set) uji amonium laboratory chemicals bahan kimia laboratorium maha ujian makmal mahachem/玛哈化学 铵测试 (1.14752.0001)（套） 实验室化学品 玛哈

ammonium-test-1-14752-0001-set

Silicate (silicic Acid) Test (1.14794.0001) (set)

silicate (silicic acid) test (1.14794.0001) (set) uji silikat (asam silikat) laboratory chemicals bahan kimia laboratorium maha ujian (asid silik) makmal mahachem/玛哈化学 硅酸盐（硅酸）测试（1.14794.0001）（套） 实验室化学品 玛哈

silicate-silicic-acid-test-1-14794-0001-set

FLUKE 717 30G -850mbar to 2bar Pressure Calibrator

 Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.


717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)

717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)

717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)

717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)


For measuring overpressure and vacuum with an internal sensor

Suitable for non-corrosive gases and liquids

Select from numerous technical units for the pressure

Simultaneous measurement of pressure and current for simple P/I or I/P testing

Zero, min. / max., hold and damp functions

Test functions for push button switches: adjusting, resetting, dead zone

CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V

Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual

FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G

Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor.
• Over pressure of 2xFS boosts safety
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process
• Supports a wide range of pressure units including psi, kPa and inHg
• Broad operating temperature range between -10°C and +55°C to endure tough conditions


• Heating systems
• Oil and gas processing
• Pharmaceuticals manufacture


What's included with this pressure calibrator?

As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.


It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.
 

<h3 class="md-block-header-three">FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3> Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. Fluke 717 series includes:717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) <h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>For measuring overpressure and vacuum with an internal sensor</li><li>Suitable for non-corrosive gases and liquids</li><li>Select from numerous technical units for the pressure</li><li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li><li>24 V loop supply</li><li>Zero, min. / max., hold and damp functions</li><li>Test functions for push button switches: adjusting, resetting, dead zone</li></ul><h3 class="md-block-header-three">Standards</h3>CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V<h3 class="md-block-header-three">Supplied with</h3>Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual<h3 class="md-block-header-three">FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It&#x27;s designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it&#x27;s a piece of cake to carry around your factory floor. • Over pressure of 2xFS boosts safety • 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process • Supports a wide range of pressure units including psi, kPa and inHg • Broad operating temperature range between -10°C and +55°C to endure tough conditions <h3 class="md-block-header-three">Applications</h3>• Heating systems • Oil and gas processing • Pharmaceuticals manufacture <h3 class="md-block-header-three">What&#x27;s included with this pressure calibrator?</h3>As it&#x27;s supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. <h3 class="md-block-header-three">How big is this calibrator?</h3>It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.

<h3>FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3>
&nbsp;Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. 

Fluke 717 series includes:
717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)
717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) 

<h3>Features and Benefits:</h3>
<ul>
<li>For measuring overpressure and vacuum with an internal sensor</li>
<li>Suitable for non-corrosive gases and liquids</li>
<li>Select from numerous technical units for the pressure</li>
<li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li>
<li>24 V loop supply</li>
<li>Zero, min. / max., hold and damp functions</li>
<li>Test functions for push button switches: adjusting, resetting, dead zone</li>
</ul>
<h3>Standards</h3>
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
<h3>Supplied with</h3>
Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual
<h3>FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>
Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor. 
• Over pressure of 2xFS boosts safety 
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process 
• Supports a wide range of pressure units including psi, kPa and inHg 
• Broad operating temperature range between -10°C and +55°C to endure tough conditions 

<h3>Applications</h3>
• Heating systems 
• Oil and gas processing 
• Pharmaceuticals manufacture 

<h3>What's included with this pressure calibrator?</h3>
As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. 

<h3>How big is this calibrator?</h3>
It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands. 
&nbsp;

fluke 717 30g -850mbar 2bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-717-30g-850mbar-to-2bar-pressure-calibrator

Fluke 750P01 Pressure Module, for Use With 725, 726, 750 Series

 Accessory Type	Differential Pressure Module

The pressure modules in the Fluke 750P Series enable gauge or differential or absolute pressure measurement with Fluke 750 and 740 series documenting process calibrators (DPCs) or with Fluke 725 and 726 multifunction process calibrators (MPCs). Modules can be selected to cover pressure calibrations ranging from 0 to 1 in H20 to 10,000 psi (2.5 mBar to 690 bar. Gauge pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labelled for range, overpressure and media compatibility. All modules include NPT, metric (BSP) and M20 adapters.

0.025% reference uncertainty
6-month and 1-year specifications
Temperature compensated 0°C to 50°C
Digital communication to calibrators, no analog losses or errors
Broad selection of ranges
Gauge, differential, dual range, absolute and vacuum measurement models
Urethane overmoulding protection

<h3 class="md-block-header-three">Fluke 750P01 Pressure Module, for Use With 725, 726, 750 Series</h3> Accessory Type	Differential Pressure ModuleFor Use With	725, 726, 750 SeriesModel Number p	750P01Pressure Port Type	DifferentialPressure Range	0 to 25 mbarThe pressure modules in the Fluke 750P Series enable gauge or differential or absolute pressure measurement with Fluke 750 and 740 series documenting process calibrators (DPCs) or with Fluke 725 and 726 multifunction process calibrators (MPCs). Modules can be selected to cover pressure calibrations ranging from 0 to 1 in H20 to 10,000 psi (2.5 mBar to 690 bar. Gauge pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labelled for range, overpressure and media compatibility. All modules include NPT, metric (BSP) and M20 adapters.0.025% reference uncertainty 6-month and 1-year specifications Temperature compensated 0°C to 50°C Digital communication to calibrators, no analog losses or errors Broad selection of ranges Gauge, differential, dual range, absolute and vacuum measurement models Urethane overmoulding protection

<h3>Fluke 750P01 Pressure Module, for Use With 725, 726, 750 Series</h3>
&nbsp;Accessory Type	Differential Pressure Module
For Use With	725, 726, 750 Series
Model Number p	750P01
Pressure Port Type	Differential
Pressure Range	0 to 25 mbar
The pressure modules in the Fluke 750P Series enable gauge or differential or absolute pressure measurement with Fluke 750 and 740 series documenting process calibrators (DPCs) or with Fluke 725 and 726 multifunction process calibrators (MPCs). Modules can be selected to cover pressure calibrations ranging from 0 to 1 in H20 to 10,000 psi (2.5 mBar to 690 bar. Gauge pressure modules have one pressure fitting and measure the pressure with respect to atmospheric pressure. Differential pressure modules have two pressure fittings and measure the difference between the applied pressure on the high fitting versus the low fitting. Each module is clearly labelled for range, overpressure and media compatibility. All modules include NPT, metric (BSP) and M20 adapters.
0.025% reference uncertainty 
6-month and 1-year specifications 
Temperature compensated 0°C to 50°C 
Digital communication to calibrators, no analog losses or errors 
Broad selection of ranges 
Gauge, differential, dual range, absolute and vacuum measurement models 
Urethane overmoulding protection

Fluke 750P Series Pressure Modules Data Sheet

Fluke 750P/750R Series Pressure Modules Instruction Sheet

fluke 750p01 pressure module, use 725, 726, 750 series modul tekanan 750p01, untuk digunakan dengan seri calibrators siri fluke/福禄克 压力模块，适用于 725、726、750 系列 福禄克