Iwata

Fasteners

fasteners

Eye Bolts

eye-bolts

Spanners & Sockets

spanners-sockets

Ratchet Spanners

ratchet-spanners

Sockets

sockets

Washers

washers

<h3 class="md-block-header-three">M10 004-001-1050 1/4 Dr 5MM 6PT Skt</h3> SIZE (6PT) 5.0mm LENGTH (MM) 25

<h3>M10 004-001-1050 1/4 Dr 5MM 6PT Skt</h3>
&nbsp;SIZE (6PT) 5.0mm&nbsp;
&nbsp;LENGTH (MM) 25&nbsp;

Wing Poh Hardware

BONDHUS

HOZELOCK

KNIPEX PLIERS

SABOTEN GARDEN TOOLS

SUNFLAG

KTC KYOTO TOOL

TAJIMA TOOLS

GEARWRENCH

WERA TOOLS

Combination Spanners

Ring Spanners

Impact Sockets

Hole Saws

Drill Bits & Drill Bit Sets

Open End Spanners

Screwdrivers

Hex Keys & Sets

Garden Watering System

Sales

buyerIntroduction

M10 004-001-1050 1/4 Dr 5MM 6PT Skt

m10 004-001-1050 1/4 dr 5mm 6pt skt sockets

m10-004-001-1050-1-4-dr-5mm-6pt-skt

Shim Ring, Inner Diameter 5mm X Outer Diameter 8mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 8mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 8mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 8mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 8mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Rubber Seals

Other Tools

Hose Clamp

Leland

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 8mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 8mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 8mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-8mm-pack-of-10

Carbon Steel ID 5mm x OD 8mm x 0.10mm PN RF005008010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 8mm x 0.15mm PN RF005008015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 8mm x 0.20mm PN RF005008020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 8mm x 0.30mm PN RF005008030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 8mm x 0.50mm PN RF005008050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 8mm x 1mm PN RF005008100, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 0.05mm PN RB005008005, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 0.10mm PN RB005008010, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 0.15mm PN RB005008015, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 0.20mm PN RB005008020, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 0.30mm PN RB005008030, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 0.50mm PN RB005008050, Pack of 10 Pieces

Brass ID 5mm x OD 8mm x 1mm PN RB005008100, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.01mm PN RS005008001, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.02mm PN RS005008002, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.03mm PN RS005008003, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.05mm PN RS005008005, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.10mm PN RS005008010, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.15mm PN RS005008015, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.20mm PN RS005008020, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.30mm PN RS005008030, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 0.50mm PN RS005008050, Pack of 10 Pieces

304 SST ID 5mm x OD 8mm x 1mm PN RS005008100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 5mm X Outer Diameter 12mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 12mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 12mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 12mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 12mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 12mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 12mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 12mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-12mm-pack-of-10

Carbon Steel ID 5mm x OD 12mm x 0.10mm PN RF005012010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 12mm x 0.15mm PN RF005012015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 12mm x 0.20mm PN RF005012020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 12mm x 0.30mm PN RF005012030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 12mm x 0.50mm PN RF005012050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 12mm x 1mm PN RF005012100, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 0.05mm PN RB005012005, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 0.10mm PN RB005012010, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 0.15mm PN RB005012015, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 0.20mm PN RB005012020, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 0.30mm PN RB005012030, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 0.50mm PN RB005012050, Pack of 10 Pieces

Brass ID 5mm x OD 12mm x 1mm PN RB005012100, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.01mm PN RS005012001, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.02mm PN RS005012002, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.03mm PN RS005012003, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.05mm PN RS005012005, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.10mm PN RS005012010, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.15mm PN RS005012015, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.20mm PN RS005012020, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.30mm PN RS005012030, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 0.50mm PN RS005012050, Pack of 10 Pieces

304 SST ID 5mm x OD 12mm x 1mm PN RS005012100, Pack of 10 Pieces

Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 13mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 13mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 13mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 13mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 13mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-13mm-pack-of-10

Carbon Steel ID 5mm x OD 13mm x 0.10mm PN RF005013010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.15mm PN RF005013015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.20mm PN RF005013020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.30mm PN RF005013030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 0.50mm PN RF005013050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 13mm x 1mm PN RF005013100, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.05mm PN RB005013005, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.10mm PN RB005013010, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.15mm PN RB005013015, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.20mm PN RB005013020, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.30mm PN RB005013030, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 0.50mm PN RB005013050, Pack of 10 Pieces

Brass ID 5mm x OD 13mm x 1mm PN RB005013100, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.01mm PN RS005013001, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.02mm PN RS005013002, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.03mm PN RS005013003, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.05mm PN RS005013005, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.10mm PN RS005013010, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.15mm PN RS005013015, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.20mm PN RS005013020, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.30mm PN RS005013030, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 0.50mm PN RS005013050, Pack of 10 Pieces

304 SST ID 5mm x OD 13mm x 1mm PN RS005013100, Pack of 10 Pieces

Made of chrome-vanadium steel, chrome-plated.

<h3 class="md-block-header-three">M10 004-001-2050 1/4 Dr 5MM 12PT Skt </h3>Made of chrome-vanadium steel, chrome-plated.DIN standard.(German Institute for Standardization)Mirror Finish. SIZE (12PT) 5.0mm LENGTH (MM) 25

<h3>M10 004-001-2050 1/4 Dr 5MM 12PT Skt&nbsp;</h3>
Made of chrome-vanadium steel, chrome-plated.
DIN standard.
(German Institute for Standardization)
Mirror Finish.
&nbsp;SIZE (12PT) 5.0mm&nbsp;
&nbsp;LENGTH (MM) 25

M10 004-001-2050 1/4 Dr 5MM 12PT Skt

m10 004-001-2050 1/4 dr 5mm 12pt skt sockets

m10-004-001-2050-1-4-dr-5mm-12pt-skt

Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 5mmOD: 9mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 5mm
OD: 9mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 5mm X Outer Diameter 9mm, Pack of 10

iwata shim ring, inner diameter 5mm outer 9mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 外径 9mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-5mm-x-outer-diameter-9mm-pack-of-10

Carbon Steel ID 5mm x OD 9mm x 0.10mm PN RF005009010, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.15mm PN RF005009015, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.20mm PN RF005009020, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.30mm PN RF005009030, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 0.50mm PN RF005009050, Pack of 10 Pieces

Carbon Steel ID 5mm x OD 9mm x 1mm PN RF005009100, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.05mm PN RB005009005, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.10mm PN RB005009010, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.15mm PN RB005009015, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.20mm PN RB005009020, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.30mm PN RB005009030, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 0.50mm PN RB005009050, Pack of 10 Pieces

Brass ID 5mm x OD 9mm x 1mm PN RB005009100, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.01mm PN RS005009001, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.02mm PN RS005009002, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.03mm PN RS005009003, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.05mm PN RS005009005, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.10mm PN RS005009010, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.15mm PN RS005009015, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.20mm PN RS005009020, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.30mm PN RS005009030, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 0.50mm PN RS005009050, Pack of 10 Pieces

304 SST ID 5mm x OD 9mm x 1mm PN RS005009100, Pack of 10 Pieces

M10 004-357-105 3H-05 3/8 Dr 5MM Hex Skt 

<h3 class="md-block-header-three">M10 004-357-105 3H-05 3/8 Dr 5MM Hex Skt </h3>CRV drive end. S2 steel tips. ITEM 3H-05 SIZE 5mm (Hex) D X A X L (MM) 18 x 18 x 47

<h3>M10 004-357-105 3H-05 3/8 Dr 5MM Hex Skt&nbsp;</h3>
CRV drive end. S2 steel tips.&nbsp;
ITEM 3H-05&nbsp;
SIZE 5mm (Hex)&nbsp;
D X A X L (MM) 18 x 18 x 47&nbsp;

M10 004-357-105 3H-05 3/8 Dr 5MM Hex Skt

m10 004-357-105 3h-05 3/8 dr 5mm hex skt sockets 六角套筒

m10-004-357-105-3h-05-3-8-dr-5mm-hex-skt

Shim Ring, Inner Diameter 2mm X Outer Diameter 5mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 2mm X Outer Diameter 5mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 2mmOD: 5mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 2mm X Outer Diameter 5mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 2mm
OD: 5mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 2mm X Outer Diameter 5mm, Pack of 10

iwata shim ring, inner diameter 2mm outer 5mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 5mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-2mm-x-outer-diameter-5mm-pack-of-10