Ansell

MAHA

Panda Collections

QUEBEE SAFETY

RS Pro

Laboratory Consumable & Apparatus

laboratory-consumable-apparatus

Laboratory Supplies

laboratory-supplies

Mechanical Parts

mechanical-parts

O Ring

o-ring

Rubber Seals

rubber-seals

Safety

safety

Safety Gloves

safety-gloves

AE-93-311-S NITRILITE NITRILE GLOVE SZ: S (50 PAIRS/PACKET ; 10 PACKETS/CASE)

Nitrilite 93-311 is a clean nitrile glove with low levels
of ionic content and particles - for reliable product
protection. Designed for use in Class 100 / ISO 5
Cleanroom Environments.
Compatible with Class 100 (ISO 5)
Low levels of ionic content and particles for
excellent product protection 

<h3 class="md-block-header-three">AE-93-311-S NITRILITE NITRILE GLOVE SZ: S (50 PAIRS/PACKET ; 10 PACKETS/CASE)</h3>Nitrilite 93-311 is a clean nitrile glove with low levels of ionic content and particles - for reliable product protection. Designed for use in Class 100 / ISO 5 Cleanroom Environments. Compatible with Class 100 (ISO 5) Low levels of ionic content and particles for excellent product protection

<h3>AE-93-311-S NITRILITE NITRILE GLOVE SZ: S (50 PAIRS/PACKET ; 10 PACKETS/CASE)</h3>
Nitrilite 93-311 is a clean nitrile glove with low levels 
of ionic content and particles - for reliable product 
protection. Designed for use in Class 100 / ISO 5 
Cleanroom Environments. 
Compatible with Class 100 (ISO 5) 
Low levels of ionic content and particles for 
excellent product protection&nbsp;

nitrile 93-311

SYSBEL

Dupont Tyvek

Safeware

Tempshield

E+E Electronik

Dailove

Respiratory Protection

Fall Protection

Body Protection

Safety Goggles

Hazmat

Workplace Safety

Safety Shoes

Key Cabinets & Letter Boxes

Bags, Filters & Accessories

Ken Ning

buyerIntroduction

AE-93-311-S Nitrilite Nitrile Glove Sz: S (50 PAIRS/PACKET ; 10 PACKETS/CASE)

ae-93-311-s nitrilite nitrile glove sz: (50 pairs/packet 10 packets/case) sarung tangan nitril nitrilit ukuran: pasang/paket; paket/kotak) safety gloves keselamatan ansell pasang/paket paket/kes) ansell/安塞尔 丁腈手套 尺寸：s（50 双/包；10 包/箱） 安全手套 安塞尔

ae-93-311-s-nitrilite-nitrile-glove-sz-s-50-pairs-packet-10-packets-case

AE-93-311-XL NITRILITE NITRILE GLOVE SZ: XL (50 PAIRS/PACKET ; 10 PACKETS/CASE)

<h3 class="md-block-header-three">AE-93-311-XL NITRILITE NITRILE GLOVE SZ: XL (50 PAIRS/PACKET ; 10 PACKETS/CASE)</h3>Nitrilite 93-311 is a clean nitrile glove with low levels of ionic content and particles - for reliable product protection. Designed for use in Class 100 / ISO 5 Cleanroom Environments. Compatible with Class 100 (ISO 5) Low levels of ionic content and particles for excellent product protection

<h3>AE-93-311-XL NITRILITE NITRILE GLOVE SZ: XL (50 PAIRS/PACKET ; 10 PACKETS/CASE)</h3>
Nitrilite 93-311 is a clean nitrile glove with low levels 
of ionic content and particles - for reliable product 
protection. Designed for use in Class 100 / ISO 5 
Cleanroom Environments. 
Compatible with Class 100 (ISO 5) 
Low levels of ionic content and particles for 
excellent product protection&nbsp;

AE-93-311-XL Nitrilite Nitrile Glove Sz: Xl (50 PAIRS/PACKET ; 10 PACKETS/CASE)

ae-93-311-xl nitrilite nitrile glove sz: xl (50 pairs/packet 10 packets/case) sarung tangan nitril nitrilit ukuran: pasang/paket; paket/kotak) safety gloves keselamatan ansell pasang/paket paket/kes) ansell/安塞尔 丁腈手套 尺寸：xl（50 双/包；10 包/箱） 安全手套 安塞尔

ae-93-311-xl-nitrilite-nitrile-glove-sz-xl-50-pairs-packet-10-packets-case

RS PRO Datasheet

EU Declaration of Conformity

Siemens

STANLEY

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Facom

RAPID

PEGLER YORKSHIRE

Screw

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Junction & Enclosure Box

Aluminium Capacitors

RS Components ETH SG

Rs Pro 2460843 Blue Powder-Free Nitrile Disposable Gloves, Size 10, Food Safe (1 Box of 50)

rs pro 2460843 blue powder-free nitrile disposable gloves, size 10, food safe (1 box 50) sarung tangan sekali pakai nitril bebas bubuk biru, ukuran aman untuk makanan kotak berisi safety gloves keselamatan tanpa serbuk saiz peti deposit 蓝色无粉丁腈一次性手套，尺寸 10，食品安全（1 50 只） 安全手套 rs专业版

rs-pro-2460843-blue-powder-free-nitrile-disposable-gloves-size-10-food-safe-1-box-of-50

Contitech

Omron

CEJN

Vent-Axia

Air Filters

Rs Pro 2263795 Nitrile Rubber Seal, 35mm Id, 50mm Od, 10mm (1 Bag of 5)

rs pro 2263795 nitrile rubber seal, 35mm id, 50mm od, 10mm (1 bag 5) segel karet nitril, id 35mm, od 50mm, kantong isi seals pengedap getah nitrile, beg 丁腈橡胶密封件，内径 35mm，外径 50mm，10mm（1 个） rs专业版

rs-pro-2263795-nitrile-rubber-seal-35mm-id-50mm-od-10mm-1-bag-of-5

Rs Pro 2263849 Nitrile Rubber Seal, 50mm Id, 68mm Od, 10mm (1 Bag of 5)

rs pro 2263849 nitrile rubber seal, 50mm id, 68mm od, 10mm (1 bag 5) segel karet nitril, id 50mm, od 68mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 50 毫米，外径 68 毫米，10 毫米（1 个） rs专业版

rs-pro-2263849-nitrile-rubber-seal-50mm-id-68mm-od-10mm-1-bag-of-5

Rs Pro 2263851 Nitrile Rubber Seal, 50mm Id, 72mm Od, 10mm (1 Bag of 5)

rs pro 2263851 nitrile rubber seal, 50mm id, 72mm od, 10mm (1 bag 5) segel karet nitril, id 50mm, od 72mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 50 毫米，外径 72 毫米，10 毫米（1 个） rs专业版

rs-pro-2263851-nitrile-rubber-seal-50mm-id-72mm-od-10mm-1-bag-of-5

Rs Pro 2263854 Nitrile Rubber Seal, 50mm Id, 80mm Od, 10mm (1 Bag of 5)

rs pro 2263854 nitrile rubber seal, 50mm id, 80mm od, 10mm (1 bag 5) segel karet nitril, id 50mm, od 80mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 50mm，外径 80mm，10mm（1 个） rs专业版

rs-pro-2263854-nitrile-rubber-seal-50mm-id-80mm-od-10mm-1-bag-of-5

Rs Pro 2299669 Nitrile Rubber Seal, 50mm Id, 68mm Od, 10mm (1 Bag of 5)

rs pro 2299669 nitrile rubber seal, 50mm id, 68mm od, 10mm (1 bag 5) segel karet nitril, id 50mm, od 68mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 50 毫米，外径 68 毫米，10 毫米（1 个） rs专业版

rs-pro-2299669-nitrile-rubber-seal-50mm-id-68mm-od-10mm-1-bag-of-5

Rs Pro 2295283 Nitrile Rubber Seal, 38mm Id, 50mm Od, 10mm (1 Bag of 5)

rs pro 2295283 nitrile rubber seal, 38mm id, 50mm od, 10mm (1 bag 5) segel karet nitril, id 38mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 38 毫米，外径 50 毫米，10 毫米（1 个） rs专业版

rs-pro-2295283-nitrile-rubber-seal-38mm-id-50mm-od-10mm-1-bag-of-5

Datasheet

Rs Pro 2119257 Nitrile Rubber Seal, 50mm Id, 70mm Od, 10mm

rs pro 2119257 nitrile rubber seal, 50mm id, 70mm od, 10mm segel karet nitril, id 50mm, od 70mm, seals pengedap getah 丁腈橡胶密封件，内径 50mm，外径 70mm，10mm rs专业版

rs-pro-2119257-nitrile-rubber-seal-50mm-id-70mm-od-10mm

Rs Pro 2119263 Nitrile Rubber Seal, 50mm Id, 72mm Od, 10mm

rs pro 2119263 nitrile rubber seal, 50mm id, 72mm od, 10mm segel karet nitril, id 50mm, od 72mm, seals pengedap getah 丁腈橡胶密封件，内径 50 毫米，外径 72 毫米，10 毫米 rs专业版

rs-pro-2119263-nitrile-rubber-seal-50mm-id-72mm-od-10mm

Rs Pro 2263780 Nitrile Rubber Seal, 30mm Id, 50mm Od, 10mm (1 Bag of 5)

rs pro 2263780 nitrile rubber seal, 30mm id, 50mm od, 10mm (1 bag 5) segel karet nitril, id 30mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 30mm，外径 50mm，10mm（1 个） rs专业版

rs-pro-2263780-nitrile-rubber-seal-30mm-id-50mm-od-10mm-1-bag-of-5

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Wago

Kimberly Clark

HEICO

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Fuses & Fusegear

Rs Pro 1965470 Nitrile Rubber O-Ring, 7mm Bore, 10mm Outer Diameter (1 Bag of 50)

rs pro 1965470 nitrile rubber o-ring, 7mm bore, 10mm outer diameter (1 bag 50) lubang 7mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，7 毫米内径，10 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-1965470-nitrile-rubber-o-ring-7mm-bore-10mm-outer-diameter-1-bag-of-50

Rs Pro 2295275 Nitrile Rubber Seal, 33mm Id, 50mm Od, 10mm (1 Bag of 5)

rs pro 2295275 nitrile rubber seal, 33mm id, 50mm od, 10mm (1 bag 5) segel karet nitril, id 33mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 33mm，外径 50mm，10mm（1 个） rs专业版

rs-pro-2295275-nitrile-rubber-seal-33mm-id-50mm-od-10mm-1-bag-of-5

Rs Pro 2299670 Nitrile Rubber Seal, 50mm Id, 70mm Od, 10mm (1 Bag of 5)

rs pro 2299670 nitrile rubber seal, 50mm id, 70mm od, 10mm (1 bag 5) segel karet nitril, id 50mm, od 70mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 50mm，外径 70mm，10mm（1 个） rs专业版

rs-pro-2299670-nitrile-rubber-seal-50mm-id-70mm-od-10mm-1-bag-of-5

 Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 G50 ID 49.40 x CS 3.10Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Re3w0d_CiF_v8k2xE_Pn~9.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G50&nbsp;
ID 49.40 x CS 3.10
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:24j7r"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Re3w0d_CiF_v8k2xE_Pn~9.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="24j7r" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING JIS B2401 G50 ID 49.40 x CS 3.10 Nitrile (NBR) 90 Shore

oring jis b2401 g50 id 49.40 cs 3.10 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 3.10丁腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-g50-id-49-40-x-cs-3-10-nitrile-nbr-90-shore

Rs Pro 1965396 Nitrile Rubber O-Ring, 8mm Bore, 10mm Outer Diameter (1 Bag of 50)

rs pro 1965396 nitrile rubber o-ring, 8mm bore, 10mm outer diameter (1 bag 50) o-ring karet nitril, lubang 8mm, luar kantong isi ring cincin getah bor beg gelang 丁腈橡胶 形圈，8 毫米内径，10 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-1965396-nitrile-rubber-o-ring-8mm-bore-10mm-outer-diameter-1-bag-of-50

Nitrile is often referred to Buna (Buna-N) and NBR.

ORING JIS B2401 G50 ID 49.40 x CS 3.10Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/t_1Ol_156VqEZp6eOvcXki.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 G50
&nbsp;ID 49.40 x CS 3.10
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:6pulf"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/t_1Ol_156VqEZp6eOvcXki.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="6pulf" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 G50 ID 49.40 x CS 3.10 Nitrile (NBR) 70 Shore

oring jis b2401 g50 id 49.40 cs 3.10 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 3.10丁腈（nbr）70肖氏 o型圈 oem代工

oring-jis-b2401-g50-id-49-40-x-cs-3-10-nitrile-nbr-70-shore

Rs Pro 2270569 Nitrile Rubber Seal, 24mm Id, 50mm Od, 10mm (1 Bag of 5)

rs pro 2270569 nitrile rubber seal, 24mm id, 50mm od, 10mm (1 bag 5) segel karet nitril, id 24mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 24mm，外径 50mm，10mm（1 个） rs专业版

rs-pro-2270569-nitrile-rubber-seal-24mm-id-50mm-od-10mm-1-bag-of-5

Rs Pro 1965011 Nitrile Rubber O-Ring, 4mm Bore, 10mm Outer Diameter (1 Bag of 50)

rs pro 1965011 nitrile rubber o-ring, 4mm bore, 10mm outer diameter (1 bag 50) luar 4mm, kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，4 毫米内径，10 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-1965011-nitrile-rubber-o-ring-4mm-bore-10mm-outer-diameter-1-bag-of-50

QB-OCPFNFK-EXAM-XL 9" QUEBEE NITRILE POWDER FREE GLOVE SZ XL (50 PAIRS/BOX) 

Acceptable quality level: QSL 1.5
Approval: Test in compliance with:
a) FDA’s 21 CFR 800.20(b),
b) EN455 ( Part 1 ),
c) ASTM D 5151
d) SMG – 98 

<h3 class="md-block-header-three">QB-OCPFNFK-EXAM-XL 9&quot; QUEBEE NITRILE POWDER FREE GLOVE SZ XL (50 PAIRS/BOX) </h3>Material 100% natural Thickness 0.13 mmLength 24 cmCuff Beaded cuff.Ambidextrous Fits on either handPacking 10 boxes/caseAcceptable quality level: QSL 1.5 Approval: Test in compliance with: a) FDA’s 21 CFR 800.20(b), b) EN455 ( Part 1 ), c) ASTM D 5151 d) SMG – 98

<h3>QB-OCPFNFK-EXAM-XL 9" QUEBEE NITRILE POWDER FREE GLOVE SZ XL (50 PAIRS/BOX) </h3>
Material 100% natural&nbsp;
Thickness 0.13 mm
Length 24 cm
Cuff Beaded cuff.
Ambidextrous Fits on either hand
Packing 10 boxes/case
Acceptable quality level: QSL 1.5 
Approval: Test in compliance with: 
a) FDA’s 21 CFR 800.20(b), 
b) EN455 ( Part 1 ), 
c) ASTM D 5151 
d) SMG – 98&nbsp;

QB-OCPFNFK-EXAM-XL 9" Quebee Nitrile Powder Free Glove Sz Xl (50 PAIRS/BOX)

qb-ocpfnfk-exam-xl 9" quebee nitrile powder free glove sz xl (50 pairs/box) sarung tangan nitril bebas serbuk ukuran pasang/kotak) safety gloves keselamatan tanpa safety/魁北克安全 英寸魁北克丁腈无粉手套 号（50 双/盒） 安全手套 魁北克安全

qb-ocpfnfk-exam-xl-9-quebee-nitrile-powder-free-glove-sz-xl-50-pairs-box

QB-OCPFNFK-EXAM-L 9" QUEBEE NITRILE POWDER FREE GLOVE SZ L (50 PAIRS/BOX)

<h3 class="md-block-header-three">QB-OCPFNFK-EXAM-L 9&quot; QUEBEE NITRILE POWDER FREE GLOVE SZ L (50 PAIRS/BOX)</h3>Material 100% natural Thickness 0.13 mmLength 24 cmCuff Beaded cuff.Ambidextrous Fits on either handPacking 10 boxes/caseAcceptable quality level: QSL 1.5 Approval: Test in compliance with: a) FDA’s 21 CFR 800.20(b), b) EN455 ( Part 1 ), c) ASTM D 5151 d) SMG – 98

<h3>QB-OCPFNFK-EXAM-L 9" QUEBEE NITRILE POWDER FREE GLOVE SZ L (50 PAIRS/BOX)</h3>
Material 100% natural&nbsp;
Thickness 0.13 mm
Length 24 cm
Cuff Beaded cuff.
Ambidextrous Fits on either hand
Packing 10 boxes/case
Acceptable quality level: QSL 1.5 
Approval: Test in compliance with: 
a) FDA’s 21 CFR 800.20(b), 
b) EN455 ( Part 1 ), 
c) ASTM D 5151 
d) SMG – 98&nbsp;

QB-OCPFNFK-EXAM-L 9" Quebee Nitrile Powder Free Glove Sz L (50 PAIRS/BOX)

qb-ocpfnfk-exam-l 9" quebee nitrile powder free glove sz (50 pairs/box) sarung tangan nitril bebas serbuk ukuran pasang/kotak) safety gloves keselamatan tanpa safety/魁北克安全 英寸魁北克丁腈无粉手套 号（50 双/盒） 安全手套 魁北克安全

qb-ocpfnfk-exam-l-9-quebee-nitrile-powder-free-glove-sz-l-50-pairs-box

QB-OCPFNFK-EXAM-M 9" QUEBEE NITRILE POWDER FREE GLOVE SZ M (50 PAIRS/BOX) 

<h3 class="md-block-header-three">QB-OCPFNFK-EXAM-M 9&quot; QUEBEE NITRILE POWDER FREE GLOVE SZ M (50 PAIRS/BOX) </h3>Material 100% natural Thickness 0.13 mmLength 24 cmCuff Beaded cuff.Ambidextrous Fits on either handPacking 10 boxes/caseAcceptable quality level: QSL 1.5 Approval: Test in compliance with: a) FDA’s 21 CFR 800.20(b), b) EN455 ( Part 1 ), c) ASTM D 5151 d) SMG – 98

<h3>QB-OCPFNFK-EXAM-M 9" QUEBEE NITRILE POWDER FREE GLOVE SZ M (50 PAIRS/BOX) </h3>
Material 100% natural&nbsp;
Thickness 0.13 mm
Length 24 cm
Cuff Beaded cuff.
Ambidextrous Fits on either hand
Packing 10 boxes/case
Acceptable quality level: QSL 1.5 
Approval: Test in compliance with: 
a) FDA’s 21 CFR 800.20(b), 
b) EN455 ( Part 1 ), 
c) ASTM D 5151 
d) SMG – 98&nbsp;

QB-OCPFNFK-EXAM-M 9" Quebee Nitrile Powder Free Glove Sz M (50 PAIRS/BOX)

qb-ocpfnfk-exam-m 9" quebee nitrile powder free glove sz (50 pairs/box) sarung tangan nitril bebas serbuk ukuran pasang/kotak) safety gloves keselamatan tanpa safety/魁北克安全 英寸魁北克丁腈无粉手套 号（50 双/盒） 安全手套 魁北克安全

qb-ocpfnfk-exam-m-9-quebee-nitrile-powder-free-glove-sz-m-50-pairs-box

QB-OCPFNFK-EXAM-S 9" QUEBEE NITRILE POWDER FREE GLOVE SZ S (50 PAIRS/BOX) 

<h3 class="md-block-header-three">QB-OCPFNFK-EXAM-S 9&quot; QUEBEE NITRILE POWDER FREE GLOVE SZ S (50 PAIRS/BOX) </h3>Material 100% natural Thickness 0.13 mmLength 24 cmCuff Beaded cuff.Ambidextrous Fits on either handPacking 10 boxes/caseAcceptable quality level: QSL 1.5 Approval: Test in compliance with: a) FDA’s 21 CFR 800.20(b), b) EN455 ( Part 1 ), c) ASTM D 5151 d) SMG – 98

<h3>QB-OCPFNFK-EXAM-S 9" QUEBEE NITRILE POWDER FREE GLOVE SZ S (50 PAIRS/BOX) </h3>
Material 100% natural&nbsp;
Thickness 0.13 mm
Length 24 cm
Cuff Beaded cuff.
Ambidextrous Fits on either hand
Packing 10 boxes/case
Acceptable quality level: QSL 1.5 
Approval: Test in compliance with: 
a) FDA’s 21 CFR 800.20(b), 
b) EN455 ( Part 1 ), 
c) ASTM D 5151 
d) SMG – 98&nbsp;

QB-OCPFNFK-EXAM-S 9" Quebee Nitrile Powder Free Glove Sz S (50 PAIRS/BOX)

qb-ocpfnfk-exam-s 9" quebee nitrile powder free glove sz (50 pairs/box) sarung tangan nitril tanpa serbuk ukuran pasang/kotak) safety gloves keselamatan safety/魁北克安全 英寸魁北克丁腈无粉手套 码（50 双/盒） 安全手套 魁北克安全