Kleenguard

Sumirubber

WORKSAFE

Mechanical Parts

mechanical-parts

O Ring

o-ring

Safety

safety

Safety Gloves

safety-gloves

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS352 ID 123.09 x CS 5.33Material : Nitrile (NBR) 70 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS352
&nbsp;ID 123.09 x CS 5.33
Material : Nitrile (NBR) 70 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bngab"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bngab" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ORING AS568 AS352 ID 123.09 x CS 5.33 Nitrile (NBR) 70 Shore

oring as568 as352 id 123.09 cs 5.33 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 5.33腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as352-id-123-09-x-cs-5-33-nitrile-nbr-70-shore

Sumirubber Un-Line Nitrile Chemical Resist Pebble Grip Glove 33cm

Made from special nitrile (NBR) compound, Summitech nitrile provides excellent protection against abrasions,punctures, cuts and snags and resistance to a broad range of solvents, animal fats and other chemicals.Meets 21 CFR for food contact.

<h3 class="md-block-header-three">Sumirubber Un-Line Nitrile Chemical Resist Pebble Grip Glove 33cm</h3>Made from special nitrile (NBR) compound, Summitech nitrile provides excellent protection against abrasions,punctures, cuts and snags and resistance to a broad range of solvents, animal fats and other chemicals.Meets 21 CFR for food contact.<h3 class="md-block-header-three">Applications:</h3><ul class="md-block-unordered-list-item"><li>Mechanical Work</li><li>Degreasing</li><li>Wood treatment and finishing</li><li>Industrial maintenance</li><li>Handling of greasy and oil parts</li><li>Chemical processing</li><li>Car and motorcycle industries</li><li>Handling of pesticides</li></ul>Standards:<ul class="md-block-unordered-list-item"><li>EN420:2003</li><li>EN388:2003 - 4101X</li><li>EN374:2003</li><li>EN374-1:2003 - AJKLO</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Sumirubber</li><li>Product Type: Chemical Resist Glove</li><li>Non-Slip Grip: Pebble</li><li>Cuff: Straight</li><li>Colour: Green</li><li>Length: 33 cm</li><li>Thickness: 0.38 mm</li><li>No. of Package: 120 Prs/Case</li></ul>

<h3>Sumirubber Un-Line Nitrile Chemical Resist Pebble Grip Glove 33cm</h3>
Made from special nitrile (NBR) compound, Summitech nitrile provides excellent protection against abrasions,punctures, cuts and snags and resistance to a broad range of solvents, animal fats and other chemicals.Meets 21 CFR for food contact.
<h3>Applications:</h3>
<ul>
<li>Mechanical Work</li>
<li>Degreasing</li>
<li>Wood treatment and finishing</li>
<li>Industrial maintenance</li>
<li>Handling of greasy and oil parts</li>
<li>Chemical processing</li>
<li>Car and motorcycle industries</li>
<li>Handling of pesticides</li>
</ul>
Standards:
<ul>
<li>EN420:2003</li>
<li>EN388:2003 - 4101X</li>
<li>EN374:2003</li>
<li>EN374-1:2003 - AJKLO</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Sumirubber</li>
<li>Product Type: Chemical Resist Glove</li>
<li>Non-Slip Grip: Pebble</li>
<li>Cuff: Straight</li>
<li>Colour: Green</li>
<li>Length: 33 cm</li>
<li>Thickness: 0.38 mm</li>
<li>No. of Package: 120 Prs/Case</li>
</ul>

brian

NEW PIG

Bata Industrials

MASTER LOCK

Martor

NEUKING

Workgard

Slice

Safety Shoes

Padlocks & Lockout Devices

Respiratory Protection

Hazmat

Protective Suits

Safety Goggles

Body Protection

Cutters

Eileen Soh

Sumirubber Un-line Nitrile Chemical Resist Pebble Grip Glove 33cm Size 10

sumirubber un-line nitrile chemical resist pebble grip glove 33cm size 10 ukuran safety gloves sarung tangan keselamatan saiz sumirubber/苏米橡胶 丁腈化学抗蚀卵石握力手套 33 厘米 尺寸 安全手套 苏米橡胶

sumirubber-un-line-nitrile-chemical-resist-pebble-grip-glove-33cm-size-10

Latex-free 100% nitrile content offers an outstanding combination of strength and chemical resistance. Superior protection against cuts, snags, abrasions and punctures. Outperforms natural rubber, neoprene and vinyl gloves when exposed to solvents, caustics and animal fats. Curved shaped hand provides a natural fit. Available in flock lining that wicks sweat away from the skin and allows for easy on/easy off. Component materials comply with FDA Regulations for food contact.

Excellent resistance against chemicals, oils , fats, solvents and petroleum by products

Superior cut, puncture and abrasion resistance

<h3 class="md-block-header-three">Worksafe Nitchem Nitrile Glove 33cm</h3> Latex-free 100% nitrile content offers an outstanding combination of strength and chemical resistance. Superior protection against cuts, snags, abrasions and punctures. Outperforms natural rubber, neoprene and vinyl gloves when exposed to solvents, caustics and animal fats. Curved shaped hand provides a natural fit. Available in flock lining that wicks sweat away from the skin and allows for easy on/easy off. Component materials comply with FDA Regulations for food contact.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Tested in accordance with EN 388, 4101</li><li>Tested in accordance with EN 374-3, AJKL</li><li>Tested in accordance with EN 374-2</li><li>Excellent resistance against chemicals, oils , fats, solvents and petroleum by products</li><li>Superior cut, puncture and abrasion resistance</li><li>Glove is silicon free</li></ul><h3 class="md-block-header-three">Application:</h3><ul class="md-block-unordered-list-item"><li>Mechanical Work</li><li>Degreasing</li><li>Wood treatment and finishing</li><li>Industrial maintenance</li><li>Handling of greasy and oily parts</li><li>Chemical processing</li><li>Car and motorcycle industries:</li><li>Handling of pesticides</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Worksafe</li><li>Product Type: Nitrile Glove</li><li>Colour: Green</li><li>Gauge: 15 mil</li><li>Length: 33 cm</li><li>Thickness: 0.38 mm</li><li>Material: Nitrile Rubber</li></ul>

<h3>Worksafe Nitchem Nitrile Glove 33cm</h3>

Latex-free 100% nitrile content offers an outstanding combination of strength and chemical resistance. Superior protection against cuts, snags, abrasions and punctures. Outperforms natural rubber, neoprene and vinyl gloves when exposed to solvents, caustics and animal fats. Curved shaped hand provides a natural fit. Available in flock lining that wicks sweat away from the skin and allows for easy on/easy off. Component materials comply with FDA Regulations for food contact.
<h3>Features:</h3>
<ul>
<li>Tested in accordance with EN 388, 4101</li>
<li>Tested in accordance with EN 374-3, AJKL</li>
<li>Tested in accordance with EN 374-2</li>
<li>Excellent resistance against chemicals, oils , fats, solvents and petroleum by products</li>
<li>Superior cut, puncture and abrasion resistance</li>
<li>Glove is silicon free</li>
</ul>
<h3>Application:</h3>
<ul>
<li>Mechanical Work</li>
<li>Degreasing</li>
<li>Wood treatment and finishing</li>
<li>Industrial maintenance</li>
<li>Handling of greasy and oily parts</li>
<li>Chemical processing</li>
<li>Car and motorcycle industries:</li>
<li>Handling of pesticides</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Worksafe</li>
<li>Product Type: Nitrile Glove</li>
<li>Colour: Green</li>
<li>Gauge: 15 mil</li>
<li>Length: 33 cm</li>
<li>Thickness: 0.38 mm</li>
<li>Material: Nitrile Rubber</li>
</ul>

Worksafe Nitchem Nitrile Glove 33cm Size 9

worksafe nitchem nitrile glove 33cm size sarung tangan ukuran safety gloves keselamatan saiz worksafe/工作安全 丁腈手套 33 厘米 尺寸 安全手套 工作安全

worksafe-nitchem-nitrile-glove-33cm-size-9

Sumirubber Un-line Nitrile Chemical Resist Pebble Grip Glove 33cm Size 8

sumirubber un-line nitrile chemical resist pebble grip glove 33cm size ukuran safety gloves sarung tangan keselamatan saiz sumirubber/苏米橡胶 丁腈化学抗蚀卵石握力手套 33 厘米 尺寸 安全手套 苏米橡胶

sumirubber-un-line-nitrile-chemical-resist-pebble-grip-glove-33cm-size-8

KleenGuard/Jackson Safety G80 Green Nitrile 18-inch 15mil Chemical Resistant Gauntlet GLOVES (per pair)

Jackson Safety G80 Nitrile Chemical Resistant Gauntlets are offer reliable protection against chemical and mechanical hazards.

Each hand specific latex-free glove provides longer length to protect wrist and lower forearm and allows full immersion.

The glove length is 46 cm long, with 22 mil thickness and sand patch texturing on fingers and palm offering enhanced wet and dry grip.

AQL 0.65 for pinholes provides superior protection ensuring you get jobs done efficiently and safely.

The gloves offer PPE category 3 protection for handling chemicals, oils, grease, alcohols, acids, bases or solvents also in immersion

and providing the highest level of abrasion resistance (4).

They are unlined to avoid the risk of linting and protect against contamination.

Perfect for use in Aerospace, Automotive, Metal Manufacturing, Food, Transportation and Construction.

Metal Fabrication & Furniture manufacturing

Machining operations using cutting oil and coolants

Cleaning and food handling in food industries

Code 25622 - 8/M
Code 25623 - 9/L
Code 25624 - 10/XL

Tested for Mechanical Protection : EN 388: 4101 – Abrasion, Cut, Tear, PunctureTested for Resistance to Permeation by Chemicals :EN 374-3:AJKTested for Microorganism Hazards  : EN374-1:2003 Level 3Protect from Heat and Radioactive Sources CE0120 - Category III PPE product certified according to Regulation (EU) EN420 

KleenGuard/Jackson Safety G80 Green Nitrile 18-inch 15mil Chemical Resistant Gauntlet GLOVES (per pair)<ul class="md-block-unordered-list-item"><li>Jackson Safety G80 Nitrile Chemical Resistant Gauntlets are offer reliable protection against chemical and mechanical hazards.</li><li>Each hand specific latex-free glove provides longer length to protect wrist and lower forearm and allows full immersion.</li><li>The glove length is 46 cm long, with 22 mil thickness and sand patch texturing on fingers and palm offering enhanced wet and dry grip.</li><li>AQL 0.65 for pinholes provides superior protection ensuring you get jobs done efficiently and safely.</li><li>The gloves offer PPE category 3 protection for handling chemicals, oils, grease, alcohols, acids, bases or solvents also in immersion</li><li>and providing the highest level of abrasion resistance (4).</li><li>They are unlined to avoid the risk of linting and protect against contamination.</li><li>Perfect for use in Aerospace, Automotive, Metal Manufacturing, Food, Transportation and Construction.</li></ul>Typical Uses:<ul class="md-block-unordered-list-item"><li>Chemical processing &amp; Oil refining</li><li>Metal Fabrication &amp; Furniture manufacturing</li><li>Automotive assembly and painting</li><li>Aerospace and automotive degreasing</li><li>Machining operations using cutting oil and coolants</li><li>Graphic arts and printing clean-up</li><li>Janitorial and public cleaning</li><li>Cleaning and food handling in food industries</li><li>Food Processing</li></ul>Code 25622 - 8/M Code 25623 - 9/L Code 25624 - 10/XLTesting MethodTested for Mechanical Protection : EN 388: 4101 – Abrasion, Cut, Tear, PunctureTested for Resistance to Permeation by Chemicals :EN 374-3:AJKTested for Microorganism Hazards  : EN374-1:2003 Level 3Protect from Heat and Radioactive Sources CE0120 - Category III PPE product certified according to Regulation (EU) EN420

KleenGuard/Jackson Safety G80 Green Nitrile 18-inch 15mil Chemical Resistant Gauntlet GLOVES (per pair)
<ul>
<li>Jackson Safety G80 Nitrile Chemical Resistant Gauntlets are offer reliable protection against chemical and mechanical hazards.</li>
<li>Each hand specific latex-free glove provides longer length to protect wrist and lower forearm and allows full immersion.</li>
<li>The glove length is 46 cm long, with 22 mil thickness and sand patch texturing on fingers and palm offering enhanced wet and dry grip.</li>
<li>AQL 0.65 for pinholes provides superior protection ensuring you get jobs done efficiently and safely.</li>
<li>The gloves offer PPE category 3 protection for handling chemicals, oils, grease, alcohols, acids, bases or solvents also in immersion</li>
<li>and providing the highest level of abrasion resistance (4).</li>
<li>They are unlined to avoid the risk of linting and protect against contamination.</li>
<li>Perfect for use in Aerospace, Automotive, Metal Manufacturing, Food, Transportation and Construction.</li>
</ul>
Typical Uses:
<ul>
<li>Chemical processing &amp; Oil refining</li>
<li>Metal Fabrication &amp; Furniture manufacturing</li>
<li>Automotive assembly and painting</li>
<li>Aerospace and automotive degreasing</li>
<li>Machining operations using cutting oil and coolants</li>
<li>Graphic arts and printing clean-up</li>
<li>Janitorial and public cleaning</li>
<li>Cleaning and food handling in food industries</li>
<li>Food Processing</li>
</ul>
Code 25622 - 8/M 
Code 25623 - 9/L 
Code 25624 - 10/XL
Testing Method
Tested for Mechanical Protection : EN 388: 4101 – Abrasion, Cut, Tear, PunctureTested for Resistance to Permeation by Chemicals :EN 374-3:AJKTested for Microorganism Hazards  : EN374-1:2003 Level 3Protect from Heat and Radioactive Sources CE0120 - Category III PPE product certified according to Regulation (EU) EN420&nbsp;

Paul Ang

STANLEY

MAKITA

BOSCH

Werner

WIHA

DEWALT

Other Tools

Ladders & Platforms

Door Hardware & Locks

Other Power Tools

Other Measuring Tools

Other Fittings

Drills, Impact Drivers & Wrenches

Power Tools Accessories

Gardening Hand Tools

Desk stationery

PowerFit Industrial Pte Ltd

KleenGuard/Jackson Safety G80 Green Nitrile 18-inch Long 22mil Chemical Resistant Gauntlet Gloves (per pair)

kleenguard/jackson safety g80 green nitrile 18-inch long 22mil chemical resistant gauntlet gloves (per pair) panjang 18-inci sarung tangan tahan kimia pasang) keselamatan kleenguard bahan (sepasang) kleenguard/ jackson/杰克逊 绿色丁腈橡胶 18 英寸长 耐化学品手套（每对） 安全手套 克莱恩加德