AMPROBE

Brymen

Center

Extech

FLUKE

HIOKI

Ingco

Keysight

KYORITSU

Lutron

MEGGER

MULTICOMP PRO

PRO'SKIT

RS Pro

SANWA METER

Smart

TRIPLETT

Vogel

Wadfow

Test & Measurement

test-measurement

Calibrators

calibrators

Clamp Meters

clamp-meters

Electrical Power Testing

electrical-power-testing

Insulation Testers

insulation-testers

Multimeters

multimeters

Oscilloscopes

oscilloscopes

Voltmeters

voltmeters

Confidently take reliable readings with the True RMS Fluke 355 digital clamp meter, the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements. 

Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians. 

Reliably handle a wide range of high-current applications with 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC

The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors

CAT IV 600 V, CAT III 1000 V rating for added user protection

In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability

High voltage measurement of 1000 V AC + DC True RMS, 600 V AC, and 1000 V DC allows the user to perform multiple tests with only one tool

Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter

Accurately measure frequency up to 1 kHz for optimum troubleshooting

Quickly analyze readings using the MIN, MAX, and AVG functions

A large backlit display allows for easy visibility in low-lit areas

Use the display hold feature to capture readings even when the display cannot be viewed

Use the low-pass filter to smooth out noisy loads and stabilize readings

<h3 class="md-block-header-three">Fluke 355 True Rms 2000 a Clamp Meter</h3>Confidently take reliable readings with the True RMS Fluke 355 digital clamp meter, the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements. Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians. <ul class="md-block-unordered-list-item"><li>Reliably handle a wide range of high-current applications with 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC</li><li>The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors</li><li>CAT IV 600 V, CAT III 1000 V rating for added user protection</li><li>In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability</li></ul>Easy to use all-in-one tool<ul class="md-block-unordered-list-item"><li>High voltage measurement of 1000 V AC + DC True RMS, 600 V AC, and 1000 V DC allows the user to perform multiple tests with only one tool</li><li>Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter</li><li>Accurately measure frequency up to 1 kHz for optimum troubleshooting</li><li>Quickly analyze readings using the MIN, MAX, and AVG functions</li><li>A large backlit display allows for easy visibility in low-lit areas</li><li>Use the display hold feature to capture readings even when the display cannot be viewed</li><li>Use the low-pass filter to smooth out noisy loads and stabilize readings</li></ul>

<h3>Fluke 355 True Rms 2000 a Clamp Meter</h3>
Confidently take reliable readings with the True RMS Fluke 355 digital clamp meter, the tool of choice for high current clamp-on amp meter measurement up to 2000 A. The extra-wide jaw easily clamps around large conductors, typically found in high-current applications. The extra rugged design and CAT IV 600 V, CAT III 1000 V ratings add an extra element of user protection when taking high-powered measurements.&nbsp;
Accurate peak measurements can be taken using the in-rush current mode, ideal for motors and inductive loads. The 355 also measures voltage and resistance, making this an ideal clamp meter for utilities, electrical contractors and industrial service technicians.&nbsp;
<ul>
<li>Reliably handle a wide range of high-current applications with 2000 A AC + DC True RMS, 1400 A AC, and 2000 A DC</li>
<li>The large 58 mm (2.3 in) jaw capacity is suitable for large or multiple conductors</li>
<li>CAT IV 600 V, CAT III 1000 V rating for added user protection</li>
<li>In-rush current measurement captures ‘power-on’ surge current with accuracy and repeatability</li>
</ul>
Easy to use all-in-one tool
<ul>
<li>High voltage measurement of 1000 V AC + DC True RMS, 600 V AC, and 1000 V DC allows the user to perform multiple tests with only one tool</li>
<li>Resistance to 400K ohms coupled with a continuity beeper provide the convenience of a multimeter in a clamp meter</li>
<li>Accurately measure frequency up to 1 kHz for optimum troubleshooting</li>
<li>Quickly analyze readings using the MIN, MAX, and AVG functions</li>
<li>A large backlit display allows for easy visibility in low-lit areas</li>
<li>Use the display hold feature to capture readings even when the display cannot be viewed</li>
<li>Use the low-pass filter to smooth out noisy loads and stabilize readings</li>
</ul>

ACISION

PCE Instruments

Fluke Networks

Other Measuring Tools

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

Fluke 355 True Rms 2000 a Clamp Meter

fluke 355 true rms 2000 clamp meter sebuah penjepit meters semeter pengapit fluke/福禄克 真有效值 钳形表 福禄克

fluke-355-true-rms-2000-a-clamp-meter

Various useful functions are available on Android devices using Bluetooth communication

• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) 
• Saved data includes measurement, GPS location and date & time Easy to check on map "When" and "Where" the measurement was made
• Comparator function on Android device informs when the measured value is lower/higher than the preset value


Earth /Ground resistance and Leakage current measurement functions
• The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems
• True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks
• Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments 

<h3 class="md-block-header-three">Various useful functions are available on Android devices using Bluetooth communication</h3>• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) • Saved data includes measurement, GPS location and date &amp; time Easy to check on map &quot;When&quot; and &quot;Where&quot; the measurement was made • Comparator function on Android device informs when the measured value is lower/higher than the preset value <h3 class="md-block-header-three">Earth /Ground resistance and Leakage current measurement functions • The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems • True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks • Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments </h3>

&nbsp;
<h3>Various useful functions are available on Android devices using Bluetooth communication</h3>
• Real time measurements can be transferred, shown and saved on Android device (up to 100 measurements) 
• Saved data includes measurement, GPS location and date &amp; time Easy to check on map "When" and "Where" the measurement was made 
• Comparator function on Android device informs when the measured value is lower/higher than the preset value 

<h3>Earth /Ground resistance and Leakage current measurement functions 
• The earth resistance from 0.05 to 1500 Ω can be measured without the auxiliary earth spikes in multi-earthing systems 
• True RMS leakage or phase current readings from 0.1mA to 30.0A provides vital additional information in earthing networks 
• Filter function offers increased immunity to electrical noise and a Noise mark appears in excessively high noisy environments&nbsp;</h3>

Product Catalogue

Technical Specification

Others

CHIAYO

RAACO

SHOW

KYORITSU INSTRUMENTS

Microphone

Tools Organizers

Soldering & Brazing Equipment

Motor Rotation/Phase

Toolboxes

Multiple Tools Sets

Flossie Chua

buyerIntroduction

Kyoritsu 4202 Earth Clamp Testers Bluetooth (valid for Singapore Purchases Only)

kyoritsu 4202 earth clamp testers bluetooth (valid singapore purchases only) (bluetooth) electrical power testing pengujian daya listrik ujian tenaga elektrik kyoritsu/协立 共立4202接地钳测试仪（蓝牙） 电力测试 协立

kyoritsu-4202-earth-clamp-testers-bluetooth-valid-for-singapore-purchases-only

Kit Contents	80BK-A Thermocouple Bead Probe, AC72 Alligator Clips, Cable, Fluke 289V Advanced Data Logging Multimeter, FlukeView Forms Software, TL71 Test Leads

• 50,000 Count, 320 x 240 dot-matrix LCD display with white backlight, allowing clear multiple on-screen display of measurement information
• 0.025% basic DC accuracy
• Logging function with TrendCapture plots measurements as single line to help detect anomalies (TrendCapture allows graphically view of logged readings without a PC)
• F1 → F4 soft keys provide flexible user function menus
• Navigation keys allow quick selection of menu options and scroll through information screens
• Saved measurements allow operator to name and recall measurements made in the field
• Upgradeable field and expandable meter as new capabilities are added
• Record events and trends for troubleshooting intermittent problems or profiling loads
• i-info button on-board helps screen for measurement functions
• Internal memory allows standalone logging for up to 180 hours
• Preferred measurement settings can be easily saved
• True-RMS AC voltage and current for accurate measurement of complex signals or non-linear loads. AC bandwidth specified to 100 kHz
• DBV / dBm measurement
• 1 μV resolution in DC mV range
• Current measurement 20 A (30 seconds momentary, 10 A continuous)
• Peak capture function to record transients as fast as 250 μs
• Continuity / Conductance / Capacitance
• Resistance and continuity
• Duty cycle & pulse width measurement
• Min / Max / Average with Time Stamp to record signal fluctuations
• Real time and elapsed time modes
• CAT III 1000 V / CAT IV 600 V safety rated

• Fluke 289
• FlukeView forms software and cable
• 80BK thermocouple
• TL 71 Silicone test lead set
• AC72 Alligator clips
• TPAK Magnetic meter hanger for hands-free operation
• Soft case for meter protection and accessory storage

For details of the Fluke 289 True RMS logging multimeter see stock no. 156-730

FLUKE Multimeter Kit, 180 Hours Logging Memory, 50nS Conductance - FLUKE 289/FVF

Get an accurate measure of the electrical properties of your appliances with this multimeter kit from FLUKE. The set includes a data logger, test leads and probes to assess characteristics including voltage, current, resistance and temperature. You get everything you need to make diagnostics and troubleshooting easy and time-efficient. The large LED display on the logger gives a clear view of values and there's a backlight for working in dark spots. For safe storage and impact protection, the instruments in this set come zipped up in a soft case.
• Wide operating temperature range between -20°C and +55°C for use in demanding conditions
• Integrated continuity beeper ensures a clear audio signal on voltage detection
• Logging memory of up to 10,000 readings for long-term data storage
• Built-in TrendCapture produces graphical displays for easy reading
• Logger is wireless-compatible for easy data exchange with computers

• Electrical workshops
• Machine building
• Oil and gas plants 

<h3 class="md-block-header-three">Fluke 289/FVF Multimeter Kit</h3><ul class="md-block-unordered-list-item"><li> Model Number	289</li><li>Application	Electronic</li><li>Kit Contents	80BK-A Thermocouple Bead Probe, AC72 Alligator Clips, Cable, Fluke 289V Advanced Data Logging Multimeter, FlukeView Forms Software, TL71 Test Leads</li><li>Dimensions	22.2 x 10.2 x 6cm</li></ul>Features and Benefits:• 50,000 Count, 320 x 240 dot-matrix LCD display with white backlight, allowing clear multiple on-screen display of measurement information • 0.025% basic DC accuracy • Logging function with TrendCapture plots measurements as single line to help detect anomalies (TrendCapture allows graphically view of logged readings without a PC) • F1 → F4 soft keys provide flexible user function menus • Navigation keys allow quick selection of menu options and scroll through information screens • Saved measurements allow operator to name and recall measurements made in the field • Upgradeable field and expandable meter as new capabilities are added • Record events and trends for troubleshooting intermittent problems or profiling loads • i-info button on-board helps screen for measurement functions • Internal memory allows standalone logging for up to 180 hours • Preferred measurement settings can be easily saved • True-RMS AC voltage and current for accurate measurement of complex signals or non-linear loads. AC bandwidth specified to 100 kHz • DBV / dBm measurement • 1 μV resolution in DC mV range • Current measurement 20 A (30 seconds momentary, 10 A continuous) • Peak capture function to record transients as fast as 250 μs • Continuity / Conductance / Capacitance • Resistance and continuity • Duty cycle &amp; pulse width measurement • Min / Max / Average with Time Stamp to record signal fluctuations • Real time and elapsed time modes • CAT III 1000 V / CAT IV 600 V safety ratedFluke Combo Kit includes:• Fluke 289 • FlukeView forms software and cable • 80BK thermocouple • TL 71 Silicone test lead set • AC72 Alligator clips • TPAK Magnetic meter hanger for hands-free operation • Soft case for meter protection and accessory storageNoteFor details of the Fluke 289 True RMS logging multimeter see stock no. 156-730FLUKE Multimeter Kit, 180 Hours Logging Memory, 50nS Conductance - FLUKE 289/FVFGet an accurate measure of the electrical properties of your appliances with this multimeter kit from FLUKE. The set includes a data logger, test leads and probes to assess characteristics including voltage, current, resistance and temperature. You get everything you need to make diagnostics and troubleshooting easy and time-efficient. The large LED display on the logger gives a clear view of values and there&#x27;s a backlight for working in dark spots. For safe storage and impact protection, the instruments in this set come zipped up in a soft case. • Wide operating temperature range between -20°C and +55°C for use in demanding conditions • Integrated continuity beeper ensures a clear audio signal on voltage detection • Logging memory of up to 10,000 readings for long-term data storage • Built-in TrendCapture produces graphical displays for easy reading • Logger is wireless-compatible for easy data exchange with computersApplications• Electrical workshops • Machine building • Oil and gas plants

<h3>Fluke 289/FVF Multimeter Kit</h3>
<ul>
<li>&nbsp;Model Number	289</li>
<li>Application	Electronic</li>
<li>Kit Contents	80BK-A Thermocouple Bead Probe, AC72 Alligator Clips, Cable, Fluke 289V Advanced Data Logging Multimeter, FlukeView Forms Software, TL71 Test Leads</li>
<li>Dimensions	22.2 x 10.2 x 6cm</li>
</ul>
Features and Benefits:
• 50,000 Count, 320 x 240 dot-matrix LCD display with white backlight, allowing clear multiple on-screen display of measurement information 
• 0.025% basic DC accuracy 
• Logging function with TrendCapture plots measurements as single line to help detect anomalies (TrendCapture allows graphically view of logged readings without a PC) 
• F1 → F4 soft keys provide flexible user function menus 
• Navigation keys allow quick selection of menu options and scroll through information screens 
• Saved measurements allow operator to name and recall measurements made in the field 
• Upgradeable field and expandable meter as new capabilities are added 
• Record events and trends for troubleshooting intermittent problems or profiling loads 
• i-info button on-board helps screen for measurement functions 
• Internal memory allows standalone logging for up to 180 hours 
• Preferred measurement settings can be easily saved 
• True-RMS AC voltage and current for accurate measurement of complex signals or non-linear loads. AC bandwidth specified to 100 kHz 
• DBV / dBm measurement 
• 1 μV resolution in DC mV range 
• Current measurement 20 A (30 seconds momentary, 10 A continuous) 
• Peak capture function to record transients as fast as 250 μs 
• Continuity / Conductance / Capacitance 
• Resistance and continuity 
• Duty cycle &amp; pulse width measurement 
• Min / Max / Average with Time Stamp to record signal fluctuations 
• Real time and elapsed time modes 
• CAT III 1000 V / CAT IV 600 V safety rated
Fluke Combo Kit includes:
• Fluke 289 
• FlukeView forms software and cable 
• 80BK thermocouple 
• TL 71 Silicone test lead set 
• AC72 Alligator clips 
• TPAK Magnetic meter hanger for hands-free operation 
• Soft case for meter protection and accessory storage
Note
For details of the Fluke 289 True RMS logging multimeter see stock no. 156-730
FLUKE Multimeter Kit, 180 Hours Logging Memory, 50nS Conductance - FLUKE 289/FVF
Get an accurate measure of the electrical properties of your appliances with this multimeter kit from FLUKE. The set includes a data logger, test leads and probes to assess characteristics including voltage, current, resistance and temperature. You get everything you need to make diagnostics and troubleshooting easy and time-efficient. The large LED display on the logger gives a clear view of values and there's a backlight for working in dark spots. For safe storage and impact protection, the instruments in this set come zipped up in a soft case. 
• Wide operating temperature range between -20°C and +55°C for use in demanding conditions 
• Integrated continuity beeper ensures a clear audio signal on voltage detection 
• Logging memory of up to 10,000 readings for long-term data storage 
• Built-in TrendCapture produces graphical displays for easy reading 
• Logger is wireless-compatible for easy data exchange with computers
Applications
• Electrical workshops 
• Machine building 
• Oil and gas plants&nbsp;

Fluke-289 FlukeView Forms Combo Kit

SCHNEIDER ELECTRIC

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

Fluke 289/FVF Multimeter Kit

fluke 289/fvf multimeter kit multimeters fluke/福禄克 万用表套件 万用表 福禄克

fluke-289-fvf-multimeter-kit

Fluke 355 Clamp Meter, 2000A Dc, Max Current 2000A Ac Cat Iii 1000V

Absolute Maximum AC Current Measurement	2000A ac

Absolute Maximum DC Current Measurement	2000A dc

Absolute Maximum AC Voltage Measurement	600V ac

Absolute Maximum DC Voltage Measurement	1000V dc

Absolute Maximum Resistance Measurement	400kΩ

Best DC Current Accuracy	±(1.5% rdg + 5dgts)

Best AC Current Accuracy	±(1.5% rdg + 5dgts)

Best AC Voltage Accuracy	±(1% rdg + 5dgts)

Best DC Voltage Accuracy	±(1% rdg + 5dgts)

Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance

DC Current Measurement Range	40/400/2000/1400 A

AC Current Measurement Range	40A, 400A, 2000A, 1400 A

AC Voltage Measurement Range	4 V, 40 V, 400 V, 600 V

Safety Category	CAT III 1000 V, CAT IV 600V

Best Resistance Measurement Accuracy	±1.5% + 5 Digits

 Monitor the flow of electrical charges in your networks and equipment with the 355 clamp meter from FLUKE. Thanks to True-RMS measurement capabilities, its readings on both AC and DC circuits are highly accurate. You can use it to assess your devices' current, voltage and resistance characteristics, enabling quick and easy diagnosis of problems. Results are displayed on its large LCD screen, which is fitted with a bright backlight to make sure you're never left in the dark on the job.

• Jaw capacity of 58mm to accommodate multiple bigger conductors at the same time
• IP42 rating indicates it's protected from objects larger than 1mm and direct water sprays at angles up to 15° from vertical
• Powered by six AA batteries that provide up to 100 hours of operating life for long-term performance
• Comes with an operating manual to get you up to speed
• Motor inrush current measurement
• Min/Max/Average recording mode
• Frequency Measurement
• Display hold feature
• Low pass filter
• Continuity measurement with beeper

• Wiring tasks in residential and office buildings
• Industrial maintenance technicians
• Construction sites 

<h3 class="md-block-header-three">Fluke 355 Clamp Meter, 2000A Dc, Max Current 2000A Ac Cat Iii 1000V</h3><ul class="md-block-unordered-list-item"><li>Absolute Maximum AC Current Measurement	2000A ac</li><li>Absolute Maximum DC Current Measurement	2000A dc</li><li>Absolute Maximum AC Voltage Measurement	600V ac</li><li>Absolute Maximum DC Voltage Measurement	1000V dc</li><li>Absolute Maximum Resistance Measurement	400kΩ</li><li>Model Number	355</li><li>AC Current Measurement Resolution	10mA</li><li>DC Current Measurement Resolution	10mA</li><li>Best DC Current Accuracy	±(1.5% rdg + 5dgts)</li><li>Clamp Meter Type	AC/DC Clamp Meter</li><li>Best AC Current Accuracy	±(1.5% rdg + 5dgts)</li><li>Best AC Voltage Accuracy	±(1% rdg + 5dgts)</li><li>Best DC Voltage Accuracy	±(1% rdg + 5dgts)</li><li>Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance</li><li>True RMS	Yes</li><li>Jaw Capacity Busbars	58mm</li><li>Display Type	LCD</li><li>Width	98mm</li><li>DC Current Measurement Range	40/400/2000/1400 A</li><li>Dimensions	300 x 98 x 52mm</li><li>Minimum Operating Temperature	0°C</li><li>Height	52mm</li><li>AC Voltage Measurement Resolution	1mV</li><li>AC Current Measurement Range	40A, 400A, 2000A, 1400 A</li><li>Battery Life	100 h</li><li>Weight	814g</li><li>Safety Category Level	CAT IV, CAT III</li><li>Maximum Operating Temperature	+50°C</li><li>Safety Category Voltage	600 V, 1000V</li><li>Battery Type	AA</li><li>Power Source	Battery</li><li>Length	300mm</li><li>Resistance Measurement Resolution	100mΩ</li><li>DC Voltage Measurement Resolution	1mV</li><li>AC Voltage Measurement Range	4 V, 40 V, 400 V, 600 V</li><li>Maximum Conductor Size	58mm</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Best Resistance Measurement Accuracy	±1.5% + 5 Digits</li></ul> Monitor the flow of electrical charges in your networks and equipment with the 355 clamp meter from FLUKE. Thanks to True-RMS measurement capabilities, its readings on both AC and DC circuits are highly accurate. You can use it to assess your devices&#x27; current, voltage and resistance characteristics, enabling quick and easy diagnosis of problems. Results are displayed on its large LCD screen, which is fitted with a bright backlight to make sure you&#x27;re never left in the dark on the job.Features and Benefits• Jaw capacity of 58mm to accommodate multiple bigger conductors at the same time • IP42 rating indicates it&#x27;s protected from objects larger than 1mm and direct water sprays at angles up to 15° from vertical • Powered by six AA batteries that provide up to 100 hours of operating life for long-term performance • Comes with an operating manual to get you up to speed • Motor inrush current measurement • Min/Max/Average recording mode • Frequency Measurement • Display hold feature • Low pass filter • Continuity measurement with beeperApplications• Wiring tasks in residential and office buildings • Industrial maintenance technicians • Construction sites

<h3>Fluke 355 Clamp Meter, 2000A Dc, Max Current 2000A Ac Cat Iii 1000V</h3>
<ul>
<li>Absolute Maximum AC Current Measurement	2000A ac</li>
<li>Absolute Maximum DC Current Measurement	2000A dc</li>
<li>Absolute Maximum AC Voltage Measurement	600V ac</li>
<li>Absolute Maximum DC Voltage Measurement	1000V dc</li>
<li>Absolute Maximum Resistance Measurement	400kΩ</li>
<li>Model Number	355</li>
<li>AC Current Measurement Resolution	10mA</li>
<li>DC Current Measurement Resolution	10mA</li>
<li>Best DC Current Accuracy	±(1.5% rdg + 5dgts)</li>
<li>Clamp Meter Type	AC/DC Clamp Meter</li>
<li>Best AC Current Accuracy	±(1.5% rdg + 5dgts)</li>
<li>Best AC Voltage Accuracy	±(1% rdg + 5dgts)</li>
<li>Best DC Voltage Accuracy	±(1% rdg + 5dgts)</li>
<li>Functions Measured	AC Current, AC Voltage, Continuity, DC Current, DC Voltage, Frequency, Resistance</li>
<li>True RMS	Yes</li>
<li>Jaw Capacity Busbars	58mm</li>
<li>Display Type	LCD</li>
<li>Width	98mm</li>
<li>DC Current Measurement Range	40/400/2000/1400 A</li>
<li>Dimensions	300 x 98 x 52mm</li>
<li>Minimum Operating Temperature	0°C</li>
<li>Height	52mm</li>
<li>AC Voltage Measurement Resolution	1mV</li>
<li>AC Current Measurement Range	40A, 400A, 2000A, 1400 A</li>
<li>Battery Life	100 h</li>
<li>Weight	814g</li>
<li>Safety Category Level	CAT IV, CAT III</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Safety Category Voltage	600 V, 1000V</li>
<li>Battery Type	AA</li>
<li>Power Source	Battery</li>
<li>Length	300mm</li>
<li>Resistance Measurement Resolution	100mΩ</li>
<li>DC Voltage Measurement Resolution	1mV</li>
<li>AC Voltage Measurement Range	4 V, 40 V, 400 V, 600 V</li>
<li>Maximum Conductor Size	58mm</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Best Resistance Measurement Accuracy	±1.5% + 5 Digits</li>
</ul>
&nbsp;Monitor the flow of electrical charges in your networks and equipment with the 355 clamp meter from FLUKE. Thanks to True-RMS measurement capabilities, its readings on both AC and DC circuits are highly accurate. You can use it to assess your devices' current, voltage and resistance characteristics, enabling quick and easy diagnosis of problems. Results are displayed on its large LCD screen, which is fitted with a bright backlight to make sure you're never left in the dark on the job.
Features and Benefits
• Jaw capacity of 58mm to accommodate multiple bigger conductors at the same time 
• IP42 rating indicates it's protected from objects larger than 1mm and direct water sprays at angles up to 15° from vertical 
• Powered by six AA batteries that provide up to 100 hours of operating life for long-term performance 
• Comes with an operating manual to get you up to speed 
• Motor inrush current measurement 
• Min/Max/Average recording mode 
• Frequency Measurement 
• Display hold feature 
• Low pass filter 
• Continuity measurement with beeper
Applications
• Wiring tasks in residential and office buildings 
• Industrial maintenance technicians 
• Construction sites&nbsp;

Fluke 353/355 Clamp Meter User Manual

353/355 Clamp Meter Datasheet

fluke 355 clamp meter, 2000a dc, max current ac cat iii 1000v meter 355, arus maksimum meters pengapit maks fluke/福禄克 钳形表，2000a 直流，最大电流 交流 福禄克

fluke-355-clamp-meter-2000a-dc-max-current-2000a-ac-cat-iii-1000v

The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. 

With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.

Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. 

Compact digital multimeter and mA loop calibrator solution

Measure/Source/Simulate loop currents while powering the loop

Manual and automatic ramp up – ramp down functions

Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V

Range and Resolution: 1.000 A (0.440 A continuous)

Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M

Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz

Range and Resolution: 2.000 V (shows diode voltage drop)

DC Current Output (Internal Battery Operation):


Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA

Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA

DC Current Simulate (External 15 V to 48 V Loop Supply):


Automatic: Slow Ramp, Fast Ramp, 25% step

Temperature Range: 18 °C to 28 °C, for one year after calibration

Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS

Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)

Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V

Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)

<h3 class="md-block-header-three"> Fluke 787B Processmeter</h3>The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.Expand your troubleshooting capabilitiesThe Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. <ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Measure/Source/Simulate loop currents while powering the loop</li><li>Manual and automatic ramp up – ramp down functions</li><li>Easy-to-read backlit display </li></ul><h3 class="md-block-header-three">Measurement Function</h3><ul class="md-block-unordered-list-item"><li>V DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.1% + 1</li></ul><li>V AC (True-RMS): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.7% + 2</li></ul><li>mA DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 30.000 mA</li><li>Best Accuracy: 0.05% + 2</li></ul><li>A DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 0.2% + 2</li></ul><li>A AC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 1% + 2</li></ul><li>Resistance: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li><li>Best Accuracy: 0.2% + 1</li></ul><li>Frequency (0.5 Hz to 20 kHz): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li><li>Best Accuracy: 0.005% + 1</li></ul><li>Diode Test: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 2.000 V (shows diode voltage drop)</li><li>Best Accuracy: 2% + 1</li></ul><li>Continuity: </li><ul class="md-block-unordered-list-item"><li>Beeps for resistance &lt; approx. 100 ohms</li></ul></ul><h3 class="md-block-header-three">Output Function</h3><ul class="md-block-unordered-list-item"><li>DC Current Output (Internal Battery Operation): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>DC Current Simulate (External 15 V to 48 V Loop Supply): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 1000 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>Current Adjustment Modes: </li><ul class="md-block-unordered-list-item"><li>Manual: Coarse, Fine, 25% and 100% step</li><li>Automatic: Slow Ramp, Fast Ramp, 25% step</li></ul></ul><h3 class="md-block-header-three">Temperature Range</h3><ul class="md-block-unordered-list-item"><li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li><li>Storage Temperature: -40 °C to 60 °C</li><li>Operating Temperature: -20 °C to 55 °C</li><li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li><li>Relative Humidity: </li><ul class="md-block-unordered-list-item"><li>95% up to 30 °C</li><li>75% up to 40 °C</li><li>45% up to 50 °C</li><li>35% up to 55 °C</li></ul><li>Vibration: Random, 2 g, 5-500 Hz</li><li>Shock: 1 meter drop test</li><li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li><li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li><li>Weight: 600 g (1.3 lbs)</li><li>Battery: Four AA alkaline batteries</li><li>Battery Life: </li><ul class="md-block-unordered-list-item"><li>140 hours typical (measurement)</li><li>10 hours typical (sourcing 12 mA)</li></ul><li>Warranty: Three years</li></ul>

<h3> Fluke 787B Processmeter</h3>
The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications.&nbsp;
With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Expand your troubleshooting capabilities
The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.
Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes.&nbsp;
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Measure/Source/Simulate loop currents while powering the loop</li>
<li>Manual and automatic ramp up – ramp down functions</li>
<li>Easy-to-read backlit display&nbsp;</li>
</ul>
<h3>Measurement Function</h3>
<ul>
<li>V DC: 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.1% + 1</li>
</ul>
<li>V AC (True-RMS): 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.7% + 2</li>
</ul>
<li>mA DC: 
</li>
<ul>
<li>Range and Resolution: 30.000 mA</li>
<li>Best Accuracy: 0.05% + 2</li>
</ul>
<li>A DC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 0.2% + 2</li>
</ul>
<li>A AC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 1% + 2</li>
</ul>
<li>Resistance: 
</li>
<ul>
<li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li>
<li>Best Accuracy: 0.2% + 1</li>
</ul>
<li>Frequency (0.5 Hz to 20 kHz): 
</li>
<ul>
<li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li>
<li>Best Accuracy: 0.005% + 1</li>
</ul>
<li>Diode Test: 
</li>
<ul>
<li>Range and Resolution: 2.000 V (shows diode voltage drop)</li>
<li>Best Accuracy: 2% + 1</li>
</ul>
<li>Continuity: 
</li>
<ul>
<li>Beeps for resistance &lt; approx. 100 ohms</li>
</ul>
</ul>
<h3>Output Function</h3>
<ul>
<li>DC Current Output (Internal Battery Operation): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>DC Current Simulate (External 15 V to 48 V Loop Supply): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 1000 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>Current Adjustment Modes: 
</li>
<ul>
<li>Manual: Coarse, Fine, 25% and 100% step</li>
<li>Automatic: Slow Ramp, Fast Ramp, 25% step</li>
</ul>
</ul>
<h3>Temperature Range</h3>
<ul>
<li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li>
<li>Storage Temperature: -40 °C to 60 °C</li>
<li>Operating Temperature: -20 °C to 55 °C</li>
<li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li>
<li>Relative Humidity: 
</li>
<ul>
<li>95% up to 30 °C</li>
<li>75% up to 40 °C</li>
<li>45% up to 50 °C</li>
<li>35% up to 55 °C</li>
</ul>
<li>Vibration: Random, 2 g, 5-500 Hz</li>
<li>Shock: 1 meter drop test</li>
<li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li>
<li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li>
<li>Weight: 600 g (1.3 lbs)</li>
<li>Battery: Four AA alkaline batteries</li>
<li>Battery Life: 
</li>
<ul>
<li>140 hours typical (measurement)</li>
<li>10 hours typical (sourcing 12 mA)</li>
</ul>
<li>Warranty: Three years</li>
</ul>

Fluke 787B Processmeter

fluke 787b processmeter pengukur proses calibrators fluke/福禄克 过程仪表 福禄克

fluke-787b-processmeter

True RMS Multimeter: Accurately measures both voltage and current, even with non-linear loads.
 

Auto and Manual Ranging: Provides flexibility for both quick measurements and user-controlled precision.
 

Selectable Filter: Enhances measurement accuracy for voltage and frequency in noisy environments.
 

Customizable Insulation Test Voltages: User-selectable settings at 50 V, 100 V, 250 V, 500 V, and 1000 V accommodate various applications.
 

Remote Probe Included: Enables safe, hands-free testing in difficult-to-reach or hazardous areas.
 

Live Circuit Protection: Automatically blocks insulation tests if voltage exceeds 30V, enhancing user safety.
 

Multi-Function Capabilities: Also performs capacitance, continuity, diode, frequency, resistance, and temperature tests.

<h3 class="md-block-header-three">Fluke 1587FC/ I400 Multimeter and Clamp </h3>Features &amp; Benefits<ul class="md-block-unordered-list-item"><li>True RMS Multimeter: Accurately measures both voltage and current, even with non-linear loads. </li><li>Auto and Manual Ranging: Provides flexibility for both quick measurements and user-controlled precision. </li><li>Selectable Filter: Enhances measurement accuracy for voltage and frequency in noisy environments. </li><li>Customizable Insulation Test Voltages: User-selectable settings at 50 V, 100 V, 250 V, 500 V, and 1000 V accommodate various applications. </li><li>Remote Probe Included: Enables safe, hands-free testing in difficult-to-reach or hazardous areas. </li><li>Live Circuit Protection: Automatically blocks insulation tests if voltage exceeds 30V, enhancing user safety. </li><li>Multi-Function Capabilities: Also performs capacitance, continuity, diode, frequency, resistance, and temperature tests.</li></ul>

<h3>Fluke 1587FC/ I400 Multimeter and Clamp&nbsp;</h3>
Features &amp; Benefits
<ul>
<li>True RMS Multimeter: Accurately measures both voltage and current, even with non-linear loads. 
&nbsp;</li>
<li>Auto and Manual Ranging: Provides flexibility for both quick measurements and user-controlled precision. 
&nbsp;</li>
<li>Selectable Filter: Enhances measurement accuracy for voltage and frequency in noisy environments. 
&nbsp;</li>
<li>Customizable Insulation Test Voltages: User-selectable settings at 50 V, 100 V, 250 V, 500 V, and 1000 V accommodate various applications. 
&nbsp;</li>
<li>Remote Probe Included: Enables safe, hands-free testing in difficult-to-reach or hazardous areas. 
&nbsp;</li>
<li>Live Circuit Protection: Automatically blocks insulation tests if voltage exceeds 30V, enhancing user safety. 
&nbsp;</li>
<li>Multi-Function Capabilities: Also performs capacitance, continuity, diode, frequency, resistance, and temperature tests.</li>
</ul>

Fluke 1587FC/ I400 Multimeter and Clamp

fluke 1587fc/ i400 multimeter clamp dan penjepit 1587fc/i400 multimeters pengapit fluke/福禄克 万用表和钳形表 万用表 福禄克

fluke-1587fc-i400-multimeter-and-clamp

 DISPLAY                ・Color LCD 3.5 inches dot matrix.
ATT                            ・Anti-Trip Technology (with 2 & 3 wire) for no trip 
                                           LOOP L-PE testing on all RCDs.
                                      ・With 2 wire only, very useful in case of no 
                                          Neutral (i.e. 3-phase motor lines).
LOOP                        ・High test current range of 2Ω with 0.001Ω 
                                        resolution.
                                     ・Zs Limit compares the values required by Electrical 
                                         Installations Standard with measured results.
RCD                          ・Type AC, A, F, B(General & Selective), EV 
                                         and Variable RCDs.
                                     ・Single and Auto test, Ramp test and Contact 
                                         voltage.
EARTH                    ・Earth resistance test 2 and 3 wires with all 
                                         accessories included.
INSULATION        ・Resistance test 100, 250, 500 & 1000V with auto 
                                         discharge voltage.
CONTINUITY        ・Continuity test at 200mA or 15mA with selectable 
                                          buzzer for fast judgment.
PHASE ROTATION ・On 3-phase lines with clear indication of the 
                                              sequence on the display.
VOLTS                    ・TRMS Voltage measurements 2-600V, Mains 
                                        Frequency.
HELP                      ・Display shows how to connect the instrument 
                                        according to the function selected.
SPD                        ・Surge Protection Device test, for SPD that uses 
                                       varistor.
PAT                        ・Portable Appliance Tester function, for Insulation 
                                       and Protective conductor resistance test
SAFETY                ・IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 
                                       61557-1,2,3,4,5,6,7,10. 

<h3 class="md-block-header-three"> DISPLAY                ・Color LCD 3.5 inches dot matrix. ATT                        ・Anti-Trip Technology (with 2 &amp; 3 wire) for no trip LOOP L-PE testing on all RCDs. ・With 2 wire only, very useful in case of no Neutral (i.e. 3-phase motor lines). LOOP                       ・High test current range of 2Ω with 0.001Ω resolution. ・Zs Limit compares the values required by Electrical Installations Standard with measured results. RCD                         ・Type AC, A, F, B(General &amp; Selective), EV and Variable RCDs. ・Single and Auto test, Ramp test and Contact voltage. EARTH                    ・Earth resistance test 2 and 3 wires with all accessories included. INSULATION  ・Resistance test 100, 250, 500 &amp; 1000V with auto discharge voltage. CONTINUITY        ・Continuity test at 200mA or 15mA with selectable buzzer for fast judgment. PHASE ROTATION ・On 3-phase lines with clear indication of the sequence on the display. VOLTS                    ・TRMS Voltage measurements 2-600V, Mains Frequency. HELP                      ・Display shows how to connect the instrument according to the function selected. SPD                        ・Surge Protection Device test, for SPD that uses varistor. PAT                        ・Portable Appliance Tester function, for Insulation and Protective conductor resistance test SAFETY                ・IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 61557-1,2,3,4,5,6,7,10. </h3>

<h3>&nbsp;DISPLAY                ・Color LCD 3.5 inches dot matrix. 
ATT                        ・Anti-Trip Technology (with 2 &amp; 3 wire) for no trip 
 LOOP L-PE testing on all RCDs. 
 ・With 2 wire only, very useful in case of no 
 Neutral (i.e. 3-phase motor lines). 
LOOP                       ・High test current range of 2Ω with 0.001Ω 
 resolution. 
 ・Zs Limit compares the values required by Electrical 
 Installations Standard with measured results. 
RCD                         ・Type AC, A, F, B(General &amp; Selective), EV 
 and Variable RCDs. 
 ・Single and Auto test, Ramp test and Contact 
 voltage. 
EARTH                    ・Earth resistance test 2 and 3 wires with all 
 accessories included. 
INSULATION  ・Resistance test 100, 250, 500 &amp; 1000V with auto 
 discharge voltage. 
CONTINUITY        ・Continuity test at 200mA or 15mA with selectable 
 buzzer for fast judgment. 
PHASE ROTATION ・On 3-phase lines with clear indication of the 
 sequence on the display. 
VOLTS                    ・TRMS Voltage measurements 2-600V, Mains 
 Frequency. 
HELP                      ・Display shows how to connect the instrument 
 according to the function selected. 
SPD                        ・Surge Protection Device test, for SPD that uses 
 varistor. 
PAT                        ・Portable Appliance Tester function, for Insulation 
 and Protective conductor resistance test 
SAFETY                ・IEC 61010-1 CAT IV 300 V, CAT III 600 V. IEC 
 61557-1,2,3,4,5,6,7,10.&nbsp;</h3>

KYORITSU 6516 DATASHEET

Kyoritsu 6516 Multi-Function Tester (valid for Singapore Purchases Only)

kyoritsu 6516 multi-function tester (valid singapore purchases only) multimeters multimeter pelbagai fungsi kyoritsu/协立 共立6516多功能测试仪 万用表 协立

kyoritsu-6516-multi-function-tester-valid-for-singapore-purchases-only

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. 

 CAT IV 600V  

Key Features 
Earth resistance measurement for multi-grounded systems 
Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range) 
Measure load current up to 60.0 A range 
Clamp at the narrowest point 

Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)

Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated
Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value.
Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, 
Accuracy: ±1.5 % rdg. ±0.02 Ω
AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, 
Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less)
Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency)
Max. rated voltage to earth  600 V AC CAT IV
Memory function 2000 data
Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold
Other functions Data hold, Backlight, Filter, Auto power save
Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s)
Waterproof and dustproof IP40 (EN60529) with clamp sensor closed
Communication interface N/A
Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions)
Core jaw dia. φ 32 mm (1.26 in)
Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz)
Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1 

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. CAT IV 600V Key Features Earth resistance measurement for multi-grounded systems Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range) Measure load current up to 60.0 A range Clamp at the narrowest point Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value. Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, Accuracy: ±1.5 % rdg. ±0.02 Ω AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less) Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency) Max. rated voltage to earth 600 V AC CAT IV Memory function 2000 data Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold Other functions Data hold, Backlight, Filter, Auto power save Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s) Waterproof and dustproof IP40 (EN60529) with clamp sensor closed Communication interface N/A Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions) Core jaw dia. φ 32 mm (1.26 in) Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz) Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1

The FT6380 measures grounding resistance simply by clamping to multiple-grounded ground wires. No auxiliary grounding rod is needed, and there is no need to disconnect the ground wire from the grounding rod. The compact, low-profile sensor can be used to clamp ground wires with ease, and also provide AC current measurement functionality and can measure currents ranging from leakage current on the order of several mA to load currents of up to 60 A. 
 
 CAT IV 600V&nbsp;&nbsp;
Key Features 
Earth resistance measurement for multi-grounded systems 
Measure leak current with absolute certainty with highly sensitive 0.01 mA resolution (at 20.00 mA range) 
Measure load current up to 60.0 A range 
Clamp at the narrowest point&nbsp;
Basic specifications (Accuracy guaranteed for 1 year, Post-adjustment accuracy guaranteed for 1 year)
Measurement principle Instrument has two cores for voltage injection and current measurement. From the defined voltage and measured current, the total circuit loop resistance is calculated 
Note: For multi grounded systems only. In a multi-grounded system, the larger the number of grounding poles, the more accurate the measured value. 
Earthing resistance 0.20 Ω (0.01 Ω resolution) to 1600 Ω (20 Ω resolution), 10 ranges, Zero suppression: Less than 0.02 Ω, 
Accuracy: ±1.5 % rdg. ±0.02 Ω 
AC Current measurement 20.00 mA (0.01 mA resolution) to 60.0 A (0.1 A resolution), 5 ranges, Zero suppression: Less than 0.05 mA, 
Accuracy: ±2.0 % rdg. ±0.05 mA (30 Hz to 400 Hz, True RMS), Crest factor 5.0 or less (for the 60 A range, 1.7 or less) 
Max. allowable input 100 A AC continuous, AC 200 A for 2 minutes or shorter (at 50/60 Hz, requires derating at frequency) 
Max. rated voltage to earth 600 V AC CAT IV 
Memory function 2000 data 
Alarm function For resistance measurement and current measurement, Beeps when measured value is less than or greater than threshold 
Other functions Data hold, Backlight, Filter, Auto power save 
Display Digital LCD, max. 2000 dgt., Display refresh rate: 500 ms (2 times/s) 
Waterproof and dustproof IP40 (EN60529) with clamp sensor closed 
Communication interface N/A 
Power supply LR6 (AA) alkaline battery ×2, Max. rated power: 450 mVA, Continuous use : 35 hr (in-house testing conditions) 
Core jaw dia. φ 32 mm (1.26 in) 
Dimensions and mass 73 mm (2.87 in) W × 218 mm (8.58 in) H × 43 mm (1.69 in) D, 620 g (21.9 oz) 
Accessories Carrying case ×1, Resistance check loop (1 Ω, 25 Ω) ×1, Strap ×1, LR06 (AA) alkaline battery ×2, Instruction manual ×1&nbsp;

Measurement principle

Earthing resistance

AC Current measurement

Max. allowable input

Max. rated voltage to earth

Memory function

Alarm function

Other functions

Display

Waterproof and dustproof

Communication interface

Hioki Clamp on Earth Tester FT6380-50

hioki clamp earth tester ft6380-50 electrical power testing pengujian daya listrik pengapit pada penguji bumi ujian tenaga elektrik hioki/日木 夹地测试仪 电力测试 日木