Iwata

Precision Brand

RS Pro

Test & Measurement

test-measurement

Other Measuring Tools

other-measuring-tools

Construction

construction

Shim

shim

Fasteners

fasteners

Washers

washers

Stainless Steel Shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Widely used in applications where corrosion resistance is required. 

Used in conventional power plants, nuclear plants, oil and gas refineries, and desalinization projects. Measures 6″ wide by 50″ long. Precision Brand® Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. 

It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.

.0005" (0.0127mm) Thick, 6" Wide and 50" Long Precision Brand Shim Roll 302 SST 22LX, 22110

Shim Rolls can be cut to any size or design you need for effective alignment. Thinner sheets can be cut by hand using a shim cutter. Shim sheets thicker than .008" can be cut using wire EDM, water jet or laser. 

MSDS ID:  STAINLESS STEEL SHIM, SLOTTED SHIM, ARBORS, LAM SS, SS GAGE, TOOL WRAP 062311 

<h3 class="md-block-header-three">Stainless Steel Shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Widely used in applications where corrosion resistance is required. </h3><h3 class="md-block-header-three">Used in conventional power plants, nuclear plants, oil and gas refineries, and desalinization projects. Measures 6″ wide by 50″ long. Precision Brand® Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. </h3><h3 class="md-block-header-three">It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.</h3><h3 class="md-block-header-three">.0005&quot; (0.0127mm) Thick, 6&quot; Wide and 50&quot; Long Precision Brand Shim Roll 302 SST 22LX, 22110</h3>Shim Rolls can be cut to any size or design you need for effective alignment. Thinner sheets can be cut by hand using a shim cutter. Shim sheets thicker than .008&quot; can be cut using wire EDM, water jet or laser. <ul class="md-block-unordered-list-item"><li>Brand: Precision Brand®</li><li>Trademarks: Branded® Shim</li><li>Packaging Weight: 0.077 kg</li><li>UOM: PKG</li><li>Pieces per Package: 1</li><li>ORM-D: NO</li><li>Thickness: 0.0005&quot;</li><li>Width: 6&quot;</li><li>Length: 50&quot;</li><li>Material: 302 Full Hard Stainless Steel</li><li>MSDS ID: STAINLESS STEEL SHIM, SLOTTED SHIM, ARBORS, LAM SS, SS GAGE, TOOL WRAP 062311 </li><li>Rockwell Hardness: 40 to 45 C Scale</li><li>Tensile Strength: 185,000 psi Min</li><li>Yield Strength: 140,000 psi Min</li><li>Country of Origin: USA</li></ul>

<h3>Stainless Steel Shim is made from a full hard, cold rolled, 302 stainless steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Widely used in applications where corrosion resistance is required.&nbsp;</h3>
<h3>Used in conventional power plants, nuclear plants, oil and gas refineries, and desalinization projects. Measures 6″ wide by 50″ long. Precision Brand® Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses.&nbsp;</h3>
<h3>It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.</h3>
<h3>.0005" (0.0127mm) Thick, 6" Wide and 50" Long Precision Brand Shim Roll 302 SST 22LX, 22110</h3>
Shim Rolls can be cut to any size or design you need for effective alignment. Thinner sheets can be cut by hand using a shim cutter. Shim sheets thicker than .008" can be cut using wire EDM, water jet or laser. 
<ul>
<li>Brand: Precision Brand®</li>
<li>Trademarks: Branded® Shim</li>
<li>Packaging Weight: 0.077 kg</li>
<li>UOM: PKG</li>
<li>Pieces per Package: 1</li>
<li>ORM-D: NO</li>
<li>Thickness: 0.0005"</li>
<li>Width: 6"</li>
<li>Length: 50"</li>
<li>Material: 302 Full Hard Stainless Steel</li>
<li>MSDS ID: STAINLESS STEEL SHIM, SLOTTED SHIM, ARBORS, LAM SS, SS GAGE, TOOL WRAP 062311&nbsp;</li>
<li>Rockwell Hardness: 40 to 45 C Scale</li>
<li>Tensile Strength: 185,000 psi Min</li>
<li>Yield Strength: 140,000 psi Min</li>
<li>Country of Origin: USA</li>
</ul>

Southco

Ergomat

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw & Bolts

Ball Bearings

Painting Tools

Hooks & Eyes

Other Fittings

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Leland

buyerIntroduction

.0005" X 6" X 50" Precision Brand Shim Roll 302 Stainless Steel 22LX

.0005" 6" 50" precision brand shim roll 302 stainless steel 22lx gulungan berukuran jenama ketepatan keluli tahan karat .0005英寸 6英寸 50英寸 brand/精密品牌 垫片卷 不锈钢 精密品牌

0005-x-6-x-50-precision-brand-shim-roll-302-stainless-steel-22lx

6" x 60" PN 22138

6" x 50" PN 22110

Size

.022" (0.56mm) X 6" X 100" Precision Brand Shim Roll Carbon Steel 1008-1010 16A22, 16610

Precision Brand Carbon Steel Shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. 

It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Carbon steel shim is used in applications where hardness, flatness and accuracy are required. 

This material can be punched or sheared with minimum burring and distortion. Each shim roll measures 6″ wide by 100″ long, and come in a range of thicknesses. Different variant is available in 6" x 180".

Precision Brand® Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. 

All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.  

Available in stock from our Singapore warehouse. Buy quality shim rolls for a peace of mind. All our shim rolls are packaged neatly in a cardboard storage box for ease of transportation and storage.

MSDS ID:  STEEL SHIM, ARBORS & LAM STEEL 080312 

<h3 class="md-block-header-three">.022&quot; (0.56mm) X 6&quot; X 100&quot; Precision Brand Shim Roll Carbon Steel 1008-1010 16A22, 16610</h3><h3 class="md-block-header-three">Precision Brand Carbon Steel Shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. </h3><h3 class="md-block-header-three">It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Carbon steel shim is used in applications where hardness, flatness and accuracy are required. </h3><h3 class="md-block-header-three">This material can be punched or sheared with minimum burring and distortion. Each shim roll measures 6″ wide by 100″ long, and come in a range of thicknesses. Different variant is available in 6&quot; x 180&quot;.</h3><h3 class="md-block-header-three">Precision Brand® Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. </h3><h3 class="md-block-header-three">All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances. </h3><h3 class="md-block-header-three">Available in stock from our Singapore warehouse. Buy quality shim rolls for a peace of mind. All our shim rolls are packaged neatly in a cardboard storage box for ease of transportation and storage.</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand®</li><li>Trademarks: Branded® Shim</li><li>Packaging Weight: 1.89 kg</li><li>UOM: PKG</li><li>Pieces per Package: 1</li><li>ORM-D: NO</li><li>Thickness: 0.022&quot;</li><li>Tolerance: +/- 0.001&quot;</li><li>Width: 6&quot;</li><li>Length: 100&quot;</li><li>Material: 1008-1010 Carbon Steel</li><li>Temper: #1 Full Hard</li><li>Rockwell Hardness: RB 90 Min</li><li>Meets Standards: AISI 1008 / AISI 1010</li><li>MSDS ID: STEEL SHIM, ARBORS &amp; LAM STEEL 080312 </li></ul>

<h3>.022" (0.56mm) X 6" X 100" Precision Brand Shim Roll Carbon Steel 1008-1010 16A22, 16610</h3>
<h3>Precision Brand Carbon Steel Shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim.&nbsp;</h3>
<h3>It has everything the user needs to know clearly marked right on the shim: material type, material thickness, and lot # for full traceability. Carbon steel shim is used in applications where hardness, flatness and accuracy are required.&nbsp;</h3>
<h3>This material can be punched or sheared with minimum burring and distortion. Each shim roll measures 6″ wide by 100″ long, and come in a range of thicknesses. Different variant is available in 6" x 180".</h3>
<h3>Precision Brand® Shim Stock is widely used in the following applications: tool and die set up; alignment; new machine assembly; machine repair and maintenance; mounting of motors, pumps and other machines; short run and prototype work; along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important.&nbsp;</h3>
<h3>All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.&nbsp;&nbsp;</h3>
<h3>Available in stock from our Singapore warehouse. Buy quality shim rolls for a peace of mind. All our shim rolls are packaged neatly in a cardboard storage box for ease of transportation and storage.</h3>
<ul>
<li>Brand: Precision Brand®</li>
<li>Trademarks: Branded® Shim</li>
<li>Packaging Weight: 1.89 kg</li>
<li>UOM: PKG</li>
<li>Pieces per Package: 1</li>
<li>ORM-D: NO</li>
<li>Thickness: 0.022"</li>
<li>Tolerance: +/- 0.001"</li>
<li>Width: 6"</li>
<li>Length: 100"</li>
<li>Material: 1008-1010 Carbon Steel</li>
<li>Temper: #1 Full Hard</li>
<li>Rockwell Hardness: RB 90 Min</li>
<li>Meets Standards: AISI 1008 / AISI 1010</li>
<li>MSDS ID: STEEL SHIM, ARBORS &amp; LAM STEEL 080312&nbsp;</li>
</ul>

.022" X 6" X 100" Precision Brand Shim Roll Carbon Steel 16A22

.022" 6" 100" precision brand shim roll carbon steel 16a22 gulungan presisi merek 0,022" baja karbon jenama ketepatan keluli .022英寸 6英寸 100英寸 brand/精密品牌 垫片卷 碳钢 精密品牌

022-x-6-x-100-precision-brand-shim-roll-carbon-steel-16a22

6" x 100" PN 16610

6 x 180" PN 16755

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. 

Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. 

What competitive advantage does Precision Brand® Slotted Shim offer?

Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. 

Why are thickness tolerances so important?

Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.

Aren’t all precut slotted shims marked with an “actual” thickness?

No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.

What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?

There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:

Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)

Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.

How do I know that I am getting the best?

Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!

Thickness 0.05, 0.10, 0.20, 0.25, 0.40, 0.50, 0.70, 1 and 2 mm

Quantity Per Package: 100 Pieces (10 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (50 mm x 50 mm)Length A: 50 mmThickness 0.05, 0.10, 0.20, 0.25, 0.40, 0.50, 0.70, 1 and 2 mmGroove G: 16 mmFor Bolt Size: M16Quantity Per Package: 100 Pieces (10 pieces for each thickness)Packaging Weight: 1.20 kg

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 50mm x 50mm motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of M16. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (50 mm x 50 mm)
Length A: 50 mm
Thickness 0.05, 0.10, 0.20, 0.25, 0.40, 0.50, 0.70, 1 and 2 mm
Groove G: 16 mm
For Bolt Size: M16
Quantity Per Package: 100 Pieces (10 pieces for each thickness)
Packaging Weight: 1.20 kg

Others

Screw

Hose Clamp

Precision Brand Precut Slotted Shim Kit, 50mm X 50mm, 300 Series Stainless Steel, 100 Pieces

precision brand precut slotted shim kit, 50mm 50mm, 300 series stainless steel, 100 pieces kit beralur brand, baja tahan karat seri 300, buah berslot jenama ketepatan, keluli siri keping brand/精密品牌 预切开槽垫片套件，50 毫米 50 毫米，300 系列不锈钢，100 精密品牌

precision-brand-precut-slotted-shim-kit-50mm-x-50mm-300-series-stainless-steel-100-pieces

75mm x 75mm, Slot 22mm, 81955

100mm x 100mm, Slot 32mm, 81965

125mm x 125mm, Slot 41mm, 81975

50mm x 50mm, Slot 16mm, 81945

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch

Quantity Per Package: 130 Pieces (10 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (2 Inch x 2 Inch)Length A: 2 InchThickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 InchGroove G: 5/8 InchFor Bolt Size: 5/8 UNC or UNFQuantity Per Package: 130 Pieces (10 pieces for each thickness)Packaging Weight: 3.09 kg

&nbsp;
Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (2 Inch x 2 Inch)
Length A: 2 Inch
Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch
Groove G: 5/8 Inch
For Bolt Size: 5/8 UNC or UNF
Quantity Per Package: 130 Pieces (10 pieces for each thickness)
Packaging Weight: 3.09 kg

Precut Slotted Shim a Mini Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 130 Pieces

precut slotted shim mini kit, inch inch, 300 series stainless steel, 130 pieces kit beralur prapotong, inci inci, baja tahan karat seri 300, buah precision brand berslot keluli siri keping brand/精密品牌 预切开槽垫片迷你套件，2 英寸 英寸，300 系列不锈钢，130 精密品牌

precut-slotted-shim-a-mini-kit-2-inch-x-2-inch-300-series-stainless-steel-130-pieces

Precut Slotted Shim B Mini Kit, 3 Inch X 3 Inch, 300 Series Stainless Steel, 130 Pieces, 42950

Precut Slotted Shim C Mini Kit, 4 Inch X 4 Inch, 300 Series Stainless Steel, 130 Pieces, 42960

Precut Slotted Shim D Mini Kit, 5 Inch X 5 Inch, 300 Series Stainless Steel, 130 Pieces, 42970

Precut Slotted Shim A Mini Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 130 Pieces, 42940

RS Pro Datasheet

RS PRO Datasheet

Siemens

STANLEY

ECLIPSE TOOLS

SCHNEIDER ELECTRIC

Facom

GEARWRENCH

Startech

MEAN WELL

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 0518946 Red - Shim Kit, Stainless Steel

rs pro 0518946 red shim kit, stainless steel merah kit shim, baja tahan karat keluli 红色 垫片套件，不锈钢 rs专业版

rs-pro-0518946-red-shim-kit-stainless-steel

Quantity Per Package: 260 Pieces (20 pieces for each thickness)

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. What competitive advantage does Precision Brand® Slotted Shim offer?Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. Why are thickness tolerances so important?Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.Aren’t all precut slotted shims marked with an “actual” thickness?No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.How do I know that I am getting the best?Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!Product Description: Precut Slotted ShimMaterial: 300 Series Stainless SteelSize: A (2 Inch x 2 Inch)Length A: 2 InchThickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 InchGroove G: 5/8 InchFor Bolt Size: 5/8 UNC or UNFQuantity Per Package: 260 Pieces (20 pieces for each thickness)Packaging Weight: 4.96 kg

&nbsp;
Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;
Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;
Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;
What competitive advantage does Precision Brand® Slotted Shim offer?
Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;
Why are thickness tolerances so important?
Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.
Aren’t all precut slotted shims marked with an “actual” thickness?
No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.
What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?
There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:
Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)
Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.
How do I know that I am getting the best?
Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!
Product Description: Precut Slotted Shim
Material: 300 Series Stainless Steel
Size: A (2 Inch x 2 Inch)
Length A: 2 Inch
Thickness 0.001, 0.002, 0.003, 0.004, 0.005, 0.010, 0.015, 0.020, 0.025, 0.050, 0.075, 0.100 and 0.125 Inch
Groove G: 5/8 Inch
For Bolt Size: 5/8 UNC or UNF
Quantity Per Package: 260 Pieces (20 pieces for each thickness)
Packaging Weight: 4.96 kg

Precut Slotted Shim "a" Full Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 260 Pieces

precut slotted shim "a" full kit, inch inch, 300 series stainless steel, 260 pieces kit lengkap beralur prapotong "a", inci inci, baja tahan karat seri 300, buah precision brand penuh berslot keluli siri keping brand/精密品牌 预切开槽垫片“a”全套套件，2 英寸 英寸，300 系列不锈钢，260 精密品牌