Omron

Omron Industrial Automation

Electricals

electricals

Contactors

contactors

Industrial Automation and Control

industrial-automation-and-control

Motor Management System

motor-management-system

Power Relay

power-relay

Test & Measurement

test-measurement

Temperature Controllers

temperature-controllers

Timer Relay 

timer-relay

Omron   H5CX-A-N TIMER DIGITAL FLUSH 100-240V    

Power supply voltage *1
100 to 240 VAC 50/60 Hz
12 to 24 VDC/24 VAC 50/60 Hz
Operating voltage fluctuation range
85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC)
Power consumption
Approx. 6.2 VA at 100 to 240 VAC, Approx. 5.1 VA/2.4 W at 24 VAC/12 to 24 VDC *2 
Mounting method Flush mounting 
External connections Screw terminals 
Degree of protection IEC IP66, UL508 Type 4X (indoors) for panel surface only and when Y92S-29 Waterproof Packing is used
Digits 4 digits
Time ranges0.001 s to 9.999 s, 0.01 s to 99.99 s, 0.1 s to 999.9 s, 1 s to 9999 s, 1 s ti 99 min 59 s 0.1 m to 999.9 min, 1 min to 9999 min, 1 min to 99 h 59 min, 0.1 h to 999.9 h, 1 h to 9999 h
Timer mode Elapsed time (Up), remaining time (Down) (selectable)
Input signals Signal, Reset, Gate 
Input method
No-voltage (NPN) input/
voltage (PNP) input (switchable)
No-voltage Input
ON impedance: 1 kΩ max.
(Leakage current: 12 mA when 0 Ω)
ON residual voltage: 3 V max.
OFF impedance: 100 kΩ min.
Voltage Input
High (logic) level: 4.5 to 30 VDC
Low (logic) level: 0 to 2 VDC
(Input resistance: approx. 4.7 kΩ) 
Signal, reset, gate
Minimum input signal width: 1 or 20 ms (selectable, same for all input) 
Reset system
Power reset (depending on output mode), external reset, manual reset, automatic
reset (depending on output mode)
Power reset
Minimum power-opening time: 0.5 s (except for A-3, b-1, F, ton-1, and toff-1 mode)
Reset voltage
10% max. of rated supply voltage
Sensor waiting time250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.) 
Output modes
A: Signal ON Delay I, A-1: Signal ON Delay II,  A-2: Power ON Delay I, A-3: Power ON Delay II, b: Repeat Cycle 1, b-1: Repeat Cycle 2, d: Signal OFF Delay, E: Interval, F: Cumulative, Z: ON/OFF-duty-adjustable flicker, S: Stopwatch, toff: Flicker OFF Start 1, ton: Flicker ON Start 1, toff-1: Flicker OFF Start 2, ton-1: Flicker ON Start 2 
UOM: pcs

<h3 class="md-block-header-three">Omron H5CX-A-N TIMER DIGITAL FLUSH 100-240V </h3>Power supply voltage *1 100 to 240 VAC 50/60 Hz 12 to 24 VDC/24 VAC 50/60 Hz Operating voltage fluctuation range 85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC) Power consumption Approx. 6.2 VA at 100 to 240 VAC, Approx. 5.1 VA/2.4 W at 24 VAC/12 to 24 VDC *2 Mounting method Flush mounting External connections Screw terminals Degree of protection IEC IP66, UL508 Type 4X (indoors) for panel surface only and when Y92S-29 Waterproof Packing is used Digits 4 digits Time ranges0.001 s to 9.999 s, 0.01 s to 99.99 s, 0.1 s to 999.9 s, 1 s to 9999 s, 1 s ti 99 min 59 s 0.1 m to 999.9 min, 1 min to 9999 min, 1 min to 99 h 59 min, 0.1 h to 999.9 h, 1 h to 9999 h Timer mode Elapsed time (Up), remaining time (Down) (selectable) Input signals Signal, Reset, Gate Input method No-voltage (NPN) input/ voltage (PNP) input (switchable) No-voltage Input ON impedance: 1 kΩ max. (Leakage current: 12 mA when 0 Ω) ON residual voltage: 3 V max. OFF impedance: 100 kΩ min. Voltage Input High (logic) level: 4.5 to 30 VDC Low (logic) level: 0 to 2 VDC (Input resistance: approx. 4.7 kΩ) Signal, reset, gate Minimum input signal width: 1 or 20 ms (selectable, same for all input) Reset system Power reset (depending on output mode), external reset, manual reset, automatic reset (depending on output mode) Power reset Minimum power-opening time: 0.5 s (except for A-3, b-1, F, ton-1, and toff-1 mode) Reset voltage 10% max. of rated supply voltage Sensor waiting time250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.) Output modes A: Signal ON Delay I, A-1: Signal ON Delay II, A-2: Power ON Delay I, A-3: Power ON Delay II, b: Repeat Cycle 1, b-1: Repeat Cycle 2, d: Signal OFF Delay, E: Interval, F: Cumulative, Z: ON/OFF-duty-adjustable flicker, S: Stopwatch, toff: Flicker OFF Start 1, ton: Flicker ON Start 1, toff-1: Flicker OFF Start 2, ton-1: Flicker ON Start 2 UOM: pcs

<h3>Omron H5CX-A-N TIMER DIGITAL FLUSH 100-240V </h3>
Power supply voltage *1 
100 to 240 VAC 50/60 Hz 
12 to 24 VDC/24 VAC 50/60 Hz 
Operating voltage fluctuation range 
85% to 110% of rated supply voltage (90% to 110% at 12 to 24 VDC) 
Power consumption 
Approx. 6.2 VA at 100 to 240 VAC, Approx. 5.1 VA/2.4 W at 24 VAC/12 to 24 VDC *2 
Mounting method Flush mounting 
External connections Screw terminals 
Degree of protection IEC IP66, UL508 Type 4X (indoors) for panel surface only and when Y92S-29 Waterproof Packing is used 
Digits 4 digits 
Time ranges0.001 s to 9.999 s, 0.01 s to 99.99 s, 0.1 s to 999.9 s, 1 s to 9999 s, 1 s ti 99 min 59 s 0.1 m to 999.9 min, 1 min to 9999 min, 1 min to 99 h 59 min, 0.1 h to 999.9 h, 1 h to 9999 h 
Timer mode Elapsed time (Up), remaining time (Down) (selectable) 
Input signals Signal, Reset, Gate 
Input method 
No-voltage (NPN) input/ 
voltage (PNP) input (switchable) 
No-voltage Input 
ON impedance: 1 kΩ max. 
(Leakage current: 12 mA when 0 Ω) 
ON residual voltage: 3 V max. 
OFF impedance: 100 kΩ min. 
Voltage Input 
High (logic) level: 4.5 to 30 VDC 
Low (logic) level: 0 to 2 VDC 
(Input resistance: approx. 4.7 kΩ) 
Signal, reset, gate 
Minimum input signal width: 1 or 20 ms (selectable, same for all input) 
Reset system 
Power reset (depending on output mode), external reset, manual reset, automatic 
reset (depending on output mode) 
Power reset 
Minimum power-opening time: 0.5 s (except for A-3, b-1, F, ton-1, and toff-1 mode) 
Reset voltage 
10% max. of rated supply voltage 
Sensor waiting time250 ms max. (Control output is turned OFF and no input is accepted during sensor waiting time.) 
Output modes 
A: Signal ON Delay I, A-1: Signal ON Delay II, A-2: Power ON Delay I, A-3: Power ON Delay II, b: Repeat Cycle 1, b-1: Repeat Cycle 2, d: Signal OFF Delay, E: Interval, F: Cumulative, Z: ON/OFF-duty-adjustable flicker, S: Stopwatch, toff: Flicker OFF Start 1, ton: Flicker ON Start 1, toff-1: Flicker OFF Start 2, ton-1: Flicker ON Start 2 
UOM: pcs

Jimmy Foo

SCHNEIDER ELECTRIC

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

Omron H5CX-A-N Timer Digital Flush 100-240V

omron h5cx-a-n timer digital flush 100-240v pengatur waktu siram relay pemasa omron/欧姆龙 定时器数字冲水 欧姆龙

omron-h5cx-a-n-timer-digital-flush-100-240v

Omron   H3G-8A TIMER SPDT 220VAC 10S 36X36MM    

Low-cost, Plug-in Solid-state Timer 
Time limit operation with automatic resetting. 
Subminiature DIN size (36 x 36 mm). 
Wide choice of supply voltages: 24, 100/110/120, or 200/220/240 VAC. 
Fits standard 8-pin sockets. 
Surface-mount timer converts to flush mounting style with optional adapter (see Accessories). 
LED power-ON indicator. 
Rated time: 10s

<h3 class="md-block-header-three">Omron H3G-8A TIMER SPDT 220VAC 10S 36X36MM </h3>Low-cost, Plug-in Solid-state Timer Time limit operation with automatic resetting. Subminiature DIN size (36 x 36 mm). Wide choice of supply voltages: 24, 100/110/120, or 200/220/240 VAC. Fits standard 8-pin sockets. Surface-mount timer converts to flush mounting style with optional adapter (see Accessories). LED power-ON indicator. Rated time: 10s

<h3>Omron H3G-8A TIMER SPDT 220VAC 10S 36X36MM &nbsp;</h3>
Low-cost, Plug-in Solid-state Timer 
Time limit operation with automatic resetting. 
Subminiature DIN size (36 x 36 mm). 
Wide choice of supply voltages: 24, 100/110/120, or 200/220/240 VAC. 
Fits standard 8-pin sockets. 
Surface-mount timer converts to flush mounting style with optional adapter (see Accessories). 
LED power-ON indicator. 
Rated time: 10s

Omron H3G-8A Timer Spdt 220VAC 10S 36X36MM H3G-8A

omron h3g-8a timer spdt 220vac 10s 36x36mm relay pemasa omron/欧姆龙 定时器 欧姆龙

omron-h3g-8a-timer-spdt-220vac-10s-36x36mm-h3g-8a

MULTICOMP PRO

Analog Devices

MULTICOMP

WIHA

Pro Power

Duratool

Tenma

Hakko

TR Fastenings

Surface Mount Resistors

Multilayer Ceramic Capacitors

DC-DC Converters

Through Hole Resistors

Operational Amplifiers

Analogue to Digital Converters

Transceiver

Digital to Analogue Converters

Development Boards

Element14

Omron LY2 DC24 Contact Configuration:dpdt

omron ly2 dc24 contact configuration:dpdt konfigurasi kontak dc24: dpdt power relay relai daya kenalan:dpdt omron/欧姆龙 触点配置：dpdt 功率继电器 欧姆龙