Hirschmann

Lumberg Automation

Murr Elektronik

SCHNEIDER ELECTRIC

Startech

IT & Electronics

it-electronics

Ethernet Converters

ethernet-converters

Industrial Automation and Control

industrial-automation-and-control

 IO-Link Master

io-link-master

IT Accessories

it-accessories

Engineering Materials & Industrial Hardware

engineering-materials-industrial-hardware

Motor Accessories

motor-accessories

Network Routers

network-routers

Network Switches

network-switches

Networking Products

networking-products

Electricals

electricals

PLC Accessories

plc-accessories

Safety IO Modules

safety-io-modules

Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s 

 The SFP100BLXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling.


Wavelength: 1310nm
Maximum Data Transfer Rate: 155 Mbps
Type: Single Mode Fiber
Connection Type: LC Connector
Maximum Transfer Distance: 10 km (6.2 mi)
Power Consumption: Less than 1 Watt
DDM: Yes


This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.


• Delivers reliable 100Mbps connections for 100BASE-LX compliant networks
• Complies with Multi-Source Agreement (MSA) industry standards
• Low power consumption of less than 1 W
• Hot-swappable with fiber-optic modules


• Replace defective or damaged SFP modules
• Expand your network to remote segments
The SFP100BLXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling.
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
SFPs


What is a SFP Transceiver?
The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET.
What is the difference between SFP & SFP+ transceivers?
SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps.
What is QSFP Transceiver?
QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28.
QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels.
 

<h3 class="md-block-header-three">Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s </h3> The SFP100BLXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. Technical Specifications: Wavelength: 1310nm Maximum Data Transfer Rate: 155 Mbps Type: Single Mode Fiber Connection Type: LC Connector Maximum Transfer Distance: 10 km (6.2 mi) Power Consumption: Less than 1 Watt DDM: Yes This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. StarTech.com SFPs <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Delivers reliable 100Mbps connections for 100BASE-LX compliant networks • Complies with Multi-Source Agreement (MSA) industry standards • Low power consumption of less than 1 W • Hot-swappable with fiber-optic modules <h3 class="md-block-header-three">Applications</h3>• Replace defective or damaged SFP modules • Expand your network to remote segments The SFP100BLXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. SFPs <h3 class="md-block-header-three">What’s in the package?</h3>• SFP transceiver <h3 class="md-block-header-three">FAQs</h3>What is a SFP Transceiver? The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET. What is the difference between SFP &amp; SFP+ transceivers? SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps. What is QSFP Transceiver? QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28. QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels.

<h3>Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s </h3>
&nbsp;The SFP100BLXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. 

Technical Specifications: 

Wavelength: 1310nm 
Maximum Data Transfer Rate: 155 Mbps 
Type: Single Mode Fiber 
Connection Type: LC Connector 
Maximum Transfer Distance: 10 km (6.2 mi) 
Power Consumption: Less than 1 Watt 
DDM: Yes 

This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. 

StarTech.com SFPs 
 

<h3>Features &amp; Benefits</h3>
• Delivers reliable 100Mbps connections for 100BASE-LX compliant networks 
• Complies with Multi-Source Agreement (MSA) industry standards 
• Low power consumption of less than 1 W 
• Hot-swappable with fiber-optic modules 

<h3>Applications</h3>
• Replace defective or damaged SFP modules 
• Expand your network to remote segments 
The SFP100BLXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-LX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 10 km (6.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. 
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. 
SFPs 

<h3>What’s in the package?</h3>
• SFP transceiver 

<h3>FAQs</h3>
What is a SFP Transceiver? 
The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET. 
What is the difference between SFP &amp; SFP+ transceivers? 
SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps. 
What is QSFP Transceiver? 
QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28. 
QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels. 
&nbsp;

Datasheet SFP100BLXST

RS Pro

FLUKE

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

Startech SFP100BLXST Msa Compatible Lc Single Mode Transceiver Module, Half/Full Duplex, 100Mbit/s

startech sfp100blxst msa compatible lc single mode transceiver module, half/full duplex, 100mbit/s modul tunggal kompatibel dengan msa, networking products produk jaringan serasi mod tunggal, dupleks separuh/penuh, rangkaian startech/星泰科技 兼容 单模收发器模块，半/全双工，100mbit/s 网络产品 星泰科技

startech-sfp100blxst-msa-compatible-lc-single-mode-transceiver-module-half-full-duplex-100mbit-s

Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)

Product fulfills requirements according to UN/ECE R118

Plastic housings with good resistance against chemicals and oils. 

Current operating per contact max.: 1.5 A

Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)

Industrial Communication | Ethernet Functionality

Degree of protection (EN IEC 60529): IP20

Additional condition temperature range: depending on cable quality

Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.

Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.

Wire arrangement: white, yellow, blue, orange

Stranding: 4 wires around core filler twisted

Cable shielding (type): copper braid, tinned

Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free

Outer diameter tolerance core insulation: ± 5%

Shore hardness wire insulation: 65 Shore D

Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free

Material conductor wire: Stranded copper wire, bare

Current load capacity (standard): to DIN VDE 0298-4

Characteristic impedance: 100 Ω ± 15% @ 100 MHz

Electrical resistance line constant wire: 55 Ω/km @ 20 °C

AC withstand voltage (wire - wire): 2 kV @ 60 s

Electrical capacity line constant (wire - wire): 50,000 pF/km

Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s

AC withstand voltage (wire - shield): 2 kV @ 60 s

Min. operating temperature (static): -40 °C

Max. operating temperature (fixed): 80 °C

Operating temperature min. (dynamic): -30 °C

Operating temperature max. (dynamic): 70 °C

Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2

Chemical resistance: Good, application-related testing

Gasoline resistance: Good, application-related testing

Oil resistance: DIN EN 60811-404 | Good, application-related testing

Bending radius (fixed): 5 x Outer diameter

Bending radius (dynamic): 12 x Outer diameter

No. of bending cycles (C-track): 3 Mio. @ 25 °C

<h3 class="md-block-header-three">Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils. Cable Length:<ul class="md-block-unordered-list-item"><li>5 m</li></ul>Side 1<ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul>Electrical Data | Supply<ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1.5 A</li></ul>Industrial Communication<ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul>Industrial Communication | Ethernet Functionality<ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul>Diagnostics<ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul>Device Protection | Electrical<ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul>Mechanical Data<ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul>Mechanical Data | Material Data<ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul>Mechanical Data | Mounting Data<ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul>Environmental Characteristics | Climatic<ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul>Important Installation Notes<ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul>General Data | Cable<ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul>Structure | Cable<ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85%</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul>Mechanical Data | Cable<ul class="md-block-unordered-list-item"><li>Cable weight: 69.3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6.7 mm</li><li>Tolerance outer diameter (sheath): ± 5%</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1.4 mm</li><li>Outer diameter tolerance core insulation: ± 5%</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul>Electrical Data | Cable<ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4.8 A</li><li>Characteristic impedance: 100 Ω ± 15% @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50,000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul>Temperature Range | Cable<ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul>Resistances | Cable<ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul>Installation | Cable<ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3.3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul>

<h3>Murr 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.&nbsp;
Cable Length:
<ul>
<li>5 m</li>
</ul>
Side 1
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
Electrical Data | Supply
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1.5 A</li>
</ul>
Industrial Communication
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
Industrial Communication | Ethernet Functionality
<ul>
<li>Duplex: Full duplex</li>
</ul>
Diagnostics
<ul>
<li>Status indication LED: no</li>
</ul>
Device Protection | Electrical
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
Mechanical Data
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
Mechanical Data | Material Data
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
Mechanical Data | Mounting Data
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
Environmental Characteristics | Climatic
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
Important Installation Notes
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as excessive bending forces could compromise the IP protection class.</li>
</ul>
Cable Data
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
General Data | Cable
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
Structure | Cable
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85%</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
Mechanical Data | Cable
<ul>
<li>Cable weight: 69.3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6.7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5%</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1.4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5%</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
Electrical Data | Cable
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4.8 A</li>
<li>Characteristic impedance: 100 Ω ± 15% @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50,000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
Temperature Range | Cable
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
Resistances | Cable
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
Installation | Cable
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3.3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>

Murr Asia-Pacific Pte. Ltd

Murr Elektronik 7000-74301-7960500 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (5m)

murr elektronik 7000-74301-7960500 rj45 male 0° shielded cat5 (5m) pria terlindung accessories aksesoris lelaki aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子

murr-elektronik-7000-74301-7960500-rj45-male-0-rj45-male-0-shielded-cat5-5m

Murr 7000-74301-7960300 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (3m)

Plastic housings with good resistance against chemicals and oils.

The resistance to aggressive media should be individually tested for your application 

Current operating per contact max.: 1,5 A

Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.

Tolerance outer diameter (sheath): ± 5 %

Outer diameter tolerance core insulation: ± 5 %

Characteristic impedance: 100 Ω ± 15 % @ 100 MHz

Electrical capacity line constant (wire - wire): 50000 pF/km

<h3 class="md-block-header-three">Murr 7000-74301-7960300 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (3m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils.The resistance to aggressive media should be individually tested for your application Cable Length<ul class="md-block-unordered-list-item"><li>3 m</li></ul>Side 1<ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul>Electrical Data | Supply<ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1,5 A</li></ul>Industrial Communication<ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul>Industrial Communication | Ethernet Functionality<ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul>Diagnostics<ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul>Device Protection | Electrical<ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul>Mechanical Data<ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul>Mechanical Data | Material Data<ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul>Mechanical Data | Mounting Data<ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul>Environmental Characteristics | Climatic<ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul>Important Installation Notes<ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul>General Data | Cable<ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul>Structure | Cable<ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85 %</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul>Mechanical Data | Cable<ul class="md-block-unordered-list-item"><li>Cable weight: 69,3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6,7 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1,4 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul>Electrical Data | Cable<ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4,8 A</li><li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul>Temperature Range | Cable<ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul>Resistances | Cable<ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul>Installation | Cable<ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3,3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul>

<h3>Murr 7000-74301-7960300 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (3m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application&nbsp;
Cable Length
<ul>
<li>3 m</li>
</ul>
Side 1
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
Electrical Data | Supply
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1,5 A</li>
</ul>
Industrial Communication
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
Industrial Communication | Ethernet Functionality
<ul>
<li>Duplex: Full duplex</li>
</ul>
Diagnostics
<ul>
<li>Status indication LED: no</li>
</ul>
Device Protection | Electrical
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
Mechanical Data
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
Mechanical Data | Material Data
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
Mechanical Data | Mounting Data
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
Environmental Characteristics | Climatic
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
Important Installation Notes
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li>
</ul>
Cable Data
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
General Data | Cable
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
Structure | Cable
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85 %</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
Mechanical Data | Cable
<ul>
<li>Cable weight: 69,3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6,7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1,4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
Electrical Data | Cable
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4,8 A</li>
<li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
Temperature Range | Cable
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
Resistances | Cable
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
Installation | Cable
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3,3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>

Murr Elektronik 7000-74301-7960300 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (3m)

murr elektronik 7000-74301-7960300 rj45 male 0° shielded cat5 (3m) pria terlindung accessories aksesoris lelaki aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子

murr-elektronik-7000-74301-7960300-rj45-male-0-rj45-male-0-shielded-cat5-3m

Startech SFP100BFXST Msa Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex, 100Mbit/s 

 The SFP100BFXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-FX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 2 km (1.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling.


Wavelength: 1310nm
Maximum Data Transfer Rate: 155 Mbps
Type: Multi Mode Fiber
Connection Type: LC Connector
Maximum Transfer Distance: 2 km (1.2 mi)
Power Consumption: Less than 1 Watt
DDM: Yes


• Delivers reliable 100Mbps connections for 100BASE-FX compliant networks
• Complies with Multi-Source Agreement (MSA) industry standards
• Low power consumption of less than 1 W
• Hot-swappable with fiber-optic modules


• Replace defective or damaged SFP modules
• Expand your network to remote segments
The SFP100BFXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-FX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 2 km (1.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling.
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions.
SFPs

<h3 class="md-block-header-three">Startech SFP100BFXST Msa Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex, 100Mbit/s </h3> The SFP100BFXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-FX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 2 km (1.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. Technical Specifications: Wavelength: 1310nm Maximum Data Transfer Rate: 155 Mbps Type: Multi Mode Fiber Connection Type: LC Connector Maximum Transfer Distance: 2 km (1.2 mi) Power Consumption: Less than 1 Watt DDM: Yes This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. StarTech.com SFPs <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Delivers reliable 100Mbps connections for 100BASE-FX compliant networks • Complies with Multi-Source Agreement (MSA) industry standards • Low power consumption of less than 1 W • Hot-swappable with fiber-optic modules <h3 class="md-block-header-three">Applications</h3>• Replace defective or damaged SFP modules • Expand your network to remote segments The SFP100BFXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-FX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 2 km (1.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. SFPs<h3 class="md-block-header-three">What’s in the package?</h3>• SFP transceiver <h3 class="md-block-header-three">FAQs</h3>What is a SFP Transceiver? The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET. What is the difference between SFP &amp; SFP+ transceivers? SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps. What is QSFP Transceiver? QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28. QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels.

<h3>Startech SFP100BFXST Msa Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex, 100Mbit/s </h3>
&nbsp;The SFP100BFXST is an MSA compliant fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-FX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 2 km (1.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. 

Technical Specifications: 

Wavelength: 1310nm 
Maximum Data Transfer Rate: 155 Mbps 
Type: Multi Mode Fiber 
Connection Type: LC Connector 
Maximum Transfer Distance: 2 km (1.2 mi) 
Power Consumption: Less than 1 Watt 
DDM: Yes 

This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. 

StarTech.com SFPs 
 

<h3>Features &amp; Benefits</h3>
• Delivers reliable 100Mbps connections for 100BASE-FX compliant networks 
• Complies with Multi-Source Agreement (MSA) industry standards 
• Low power consumption of less than 1 W 
• Hot-swappable with fiber-optic modules 

<h3>Applications</h3>
• Replace defective or damaged SFP modules 
• Expand your network to remote segments 
The SFP100BFXST is a fiber SFP transceiver that’s designed, programmed and tested to work with 100BASE-FX compatible MSA switches and routers. The SFP transceiver module supports a maximum distance of up to 2 km (1.2 mi) and delivers dependable 100 Mb Ethernet connectivity over fiber cabling. 
This SFP fiber module is hot-swappable, making upgrades and replacements seamless by minimizing network disruptions. 
SFPs
<h3>What’s in the package?</h3>
• SFP transceiver 

<h3>FAQs</h3>
What is a SFP Transceiver? 
The SFP also known as ’small form-factor pluggable’ is a compact hot-swappable device that plugs into a SFP port of a network device or switch and is most commonly used for telecommunication and data communication applications. SFPs support communication using either fibre optic or copper networking cable. SFP optics have a transmitting side (Tx) and a receiving side (Rx). The transceiver communicates using a laser to the receiving side of the other optic network device. SFPs are built to support many different communication standards such as Gigabit Ethernet, Fibre Channel and SONET. 
What is the difference between SFP &amp; SFP+ transceivers? 
SFP and SFP+ transceivers are very similar in terms of size and appearance. Primarily the key difference being that SFP+ is commonly used in Gigabit Ethernet applications while SFP is for 100Bse or 1000Base applications and SFP maximum data rate is limited to 10Gbps whereas SFP= transceivers support higher but also accounts for a difference in transmission distances. It’s important to note that a SFP+ transceiver cannot be plugged into an SFP port as SFP+ do not support speeds less than 1Gbps. 
What is QSFP Transceiver? 
QSFP also known as Quad small factor pluggable is a 4 channel type of compact hot swappable transceiver and is used for 40 Gigabit ethernet data communication applications. These devices support Ethernet, Fibre Channel, InfiniBand and SONET/SDH standards with different data rate options. The most common types include: 4x1Gbps QSFP, 4x10Gbps QSFP+, 4x28Gbps QSFP28. 
QSFP+ and QSFP28 are the latest versions and support numerous 40Gbps and 100Gbps applications. Both QSFP+ and QSFP28 modules integrate 4 transmit and 4 receiver channels. 
&nbsp;

Datasheet SFP100BFXST

Startech SFP100BFXST Msa Compatible Lc Multi Mode Transceiver Module, Half/Full Duplex, 100Mbit/s

startech sfp100bfxst msa compatible lc multi mode transceiver module, half/full duplex, 100mbit/s modul kompatibel dengan msa, networking products produk jaringan serasi mod modul, separuh/penuh dupleks, rangkaian startech/星泰科技 兼容 多模收发器模块，半/全双工，100mbit/s 网络产品 星泰科技

startech-sfp100bfxst-msa-compatible-lc-multi-mode-transceiver-module-half-full-duplex-100mbit-s

Murr 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)

<h3 class="md-block-header-three">Murr 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils.The resistance to aggressive media should be individually tested for your application <ul class="md-block-unordered-list-item"><li>Cable Length</li><ul class="md-block-unordered-list-item"><li>2 m</li></ul><li>Side 1</li><ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul><li>Electrical Data | Supply</li><ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1,5 A</li></ul><li>Industrial Communication</li><ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul><li>Industrial Communication | Ethernet Functionality</li><ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul><li>Diagnostics</li><ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul><li>Device Protection | Electrical</li><ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul><li>Mechanical Data</li><ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul><li>Mechanical Data | Material Data</li><ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul><li>Mechanical Data | Mounting Data</li><ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul><li>Environmental Characteristics | Climatic</li><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul><li>Important Installation Notes</li><ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li></ul><li>Cable Data</li><ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul><li>General Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul><li>Structure | Cable</li><ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85 %</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul><li>Mechanical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable weight: 69,3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6,7 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1,4 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul><li>Electrical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4,8 A</li><li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul><li>Temperature Range | Cable</li><ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul><li>Resistances | Cable</li><ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul><li>Installation | Cable</li><ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3,3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul></ul>

<h3>Murr 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application&nbsp;
<ul>
<li>Cable Length</li>
<ul>
<li>2 m</li>
</ul>
<li>Side 1</li>
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
<li>Electrical Data | Supply</li>
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1,5 A</li>
</ul>
<li>Industrial Communication</li>
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
<li>Industrial Communication | Ethernet Functionality</li>
<ul>
<li>Duplex: Full duplex</li>
</ul>
<li>Diagnostics</li>
<ul>
<li>Status indication LED: no</li>
</ul>
<li>Device Protection | Electrical</li>
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
<li>Mechanical Data</li>
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
<li>Mechanical Data | Material Data</li>
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
<li>Mechanical Data | Mounting Data</li>
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
<li>Environmental Characteristics | Climatic</li>
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
<li>Important Installation Notes</li>
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li>
</ul>
<li>Cable Data</li>
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
<li>General Data | Cable</li>
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
<li>Structure | Cable</li>
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85 %</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
<li>Mechanical Data | Cable</li>
<ul>
<li>Cable weight: 69,3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6,7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1,4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
<li>Electrical Data | Cable</li>
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4,8 A</li>
<li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
<li>Temperature Range | Cable</li>
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
<li>Resistances | Cable</li>
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
<li>Installation | Cable</li>
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3,3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>
</ul>

Murr Elektronik 7000-74301-7960200 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (2m)

murr elektronik 7000-74301-7960200 rj45 male 0° shielded cat5 (2m) pria terlindung accessories aksesoris berlindung aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子

murr-elektronik-7000-74301-7960200-rj45-male-0-rj45-male-0-shielded-cat5-2m

Murr 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)

The resistance to aggressive media should be individually tested for your application. Further details on request.

<h3 class="md-block-header-three">Murr 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)</h3>Product fulfills requirements according to UN/ECE R118Ethernet CAT5Male straight – male straightRJ45 – RJ45, 4-poleshieldedFurther cable lengths on request.Plastic housings with good resistance against chemicals and oils.The resistance to aggressive media should be individually tested for your application. Further details on request.<ul class="md-block-unordered-list-item"><li>Cable Length</li><ul class="md-block-unordered-list-item"><li>1 m</li></ul><li>Side 1</li><ul class="md-block-unordered-list-item"><li>Mounting method: inserted</li><li>Family construction form: RJ45</li><li>No. of poles: 4</li></ul><li>Electrical Data | Supply</li><ul class="md-block-unordered-list-item"><li>Operating voltage DC max.: 60 V</li><li>Current operating per contact max.: 1,5 A</li></ul><li>Industrial Communication</li><ul class="md-block-unordered-list-item"><li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li><li>Data transmission rate max.: 100 MBit/s</li></ul><li>Industrial Communication | Ethernet Functionality</li><ul class="md-block-unordered-list-item"><li>Duplex: Full duplex</li></ul><li>Diagnostics</li><ul class="md-block-unordered-list-item"><li>Status indication LED: no</li></ul><li>Device Protection | Electrical</li><ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Pollution Degree: 3</li><li>Rated surge voltage: 1 kV</li><li>Material group (IEC 60664-1): I</li></ul><li>Mechanical Data</li><ul class="md-block-unordered-list-item"><li>Contour for corrugated hose: without</li></ul><li>Mechanical Data | Material Data</li><ul class="md-block-unordered-list-item"><li>Material housing: PUR</li><li>Locking material: PA</li></ul><li>Mechanical Data | Mounting Data</li><ul class="md-block-unordered-list-item"><li>Locking techniques: Snap-in connector</li></ul><li>Environmental Characteristics | Climatic</li><ul class="md-block-unordered-list-item"><li>Operating temperature min.: -25 °C</li><li>Operating temperature max.: 85 °C</li><li>Additional condition temperature range: depending on cable quality</li></ul><li>Important Installation Notes</li><ul class="md-block-unordered-list-item"><li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li><li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li></ul><li>Cable</li><ul class="md-block-unordered-list-item"><li>Wire arrangement: white, yellow, blue, orange</li></ul><li>General Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable identification: 796</li><li>Jacket color: green</li><li>Type of certificate: cURus</li></ul><li>Structure | Cable</li><ul class="md-block-unordered-list-item"><li>Amount stranding: 1</li><li>Stranding: 4 wires around core filler twisted</li><li>Cable shielding (type): copper braid, tinned</li><li>Cable shielding (coverage): 85 %</li><li>Banding: Fleece, foil</li><li>Filler: yes</li></ul><li>Mechanical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Cable weight: 69,3 g/m</li><li>Material jacket: PUR</li><li>Shore hardness jacket: 89 Shore A</li><li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li><li>Outer diameter (jacket): 6,7 mm</li><li>Tolerance outer diameter (sheath): ± 5 %</li><li>Material inner jacket: FRNC</li><li>Color (inner jacket): natur</li><li>Material wire insulation: PE</li><li>Amount wires: 4</li><li>Outer diameter insulation: 1,4 mm</li><li>Outer diameter tolerance core insulation: ± 5 %</li><li>Shore hardness wire insulation: 65 Shore D</li><li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li><li>Amount strands (wire): 7</li><li>Diameter of single wires: 22 AWG</li><li>Conductor cross-section (wire): 22 AWG</li><li>Material conductor wire: Stranded copper wire, bare</li></ul><li>Electrical Data | Cable</li><ul class="md-block-unordered-list-item"><li>Nominal voltage AC max.: 300 V</li><li>Current load capacity (standard): to DIN VDE 0298-4</li><li>Current load capacity min. wire: 4,8 A</li><li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li><li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li><li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li><li>Electrical capacity line constant (wire - wire): 50000 pF/km</li><li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li><li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li><li>Isolation resistance: 5000 MΩ × km</li></ul><li>Temperature Range | Cable</li><ul class="md-block-unordered-list-item"><li>Min. operating temperature (static): -40 °C</li><li>Max. operating temperature (fixed): 80 °C</li><li>Operating temperature min. (dynamic): -30 °C</li><li>Operating temperature max. (dynamic): 70 °C</li></ul><li>Resistances | Cable</li><ul class="md-block-unordered-list-item"><li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li><li>Chemical resistance: Good, application-related testing</li><li>Gasoline resistance: Good, application-related testing</li><li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li></ul><li>Installation | Cable</li><ul class="md-block-unordered-list-item"><li>Bending radius (fixed): 5 x Outer diameter</li><li>Bending radius (dynamic): 12 x Outer diameter</li><li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li><li>Traversing distance (C-track): 5 m @ 25 °C</li><li>Travel speed (C-track): 3,3 m/s @ 25 °C</li><li>No. of torsion cycles: 1 Mio. @ 25 °C</li><li>Torsion stress: ± 180 °/m</li></ul></ul>

<h3>Murr 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)</h3>
Product fulfills requirements according to UN/ECE R118
Ethernet CAT5
Male straight – male straight
RJ45 – RJ45, 4-pole
shielded
Further cable lengths on request.
Plastic housings with good resistance against chemicals and oils.
The resistance to aggressive media should be individually tested for your application. Further details on request.
<ul>
<li>Cable Length</li>
<ul>
<li>1 m</li>
</ul>
<li>Side 1</li>
<ul>
<li>Mounting method: inserted</li>
<li>Family construction form: RJ45</li>
<li>No. of poles: 4</li>
</ul>
<li>Electrical Data | Supply</li>
<ul>
<li>Operating voltage DC max.: 60 V</li>
<li>Current operating per contact max.: 1,5 A</li>
</ul>
<li>Industrial Communication</li>
<ul>
<li>Transfer parameters: CAT5e, Class D (ISO/IEC 11801:2002), (EN 50173-1)</li>
<li>Data transmission rate max.: 100 MBit/s</li>
</ul>
<li>Industrial Communication | Ethernet Functionality</li>
<ul>
<li>Duplex: Full duplex</li>
</ul>
<li>Diagnostics</li>
<ul>
<li>Status indication LED: no</li>
</ul>
<li>Device Protection | Electrical</li>
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Pollution Degree: 3</li>
<li>Rated surge voltage: 1 kV</li>
<li>Material group (IEC 60664-1): I</li>
</ul>
<li>Mechanical Data</li>
<ul>
<li>Contour for corrugated hose: without</li>
</ul>
<li>Mechanical Data | Material Data</li>
<ul>
<li>Material housing: PUR</li>
<li>Locking material: PA</li>
</ul>
<li>Mechanical Data | Mounting Data</li>
<ul>
<li>Locking techniques: Snap-in connector</li>
</ul>
<li>Environmental Characteristics | Climatic</li>
<ul>
<li>Operating temperature min.: -25 °C</li>
<li>Operating temperature max.: 85 °C</li>
<li>Additional condition temperature range: depending on cable quality</li>
</ul>
<li>Important Installation Notes</li>
<ul>
<li>Note on strain relief: Protect the connectors by suitable measures from mechanical loads, e.g., by using cable ties.</li>
<li>Note on bending radius: Attention: Observe the permissible bending radii when laying cables, as the IP protection class can be endangered by excessive bending forces.</li>
</ul>
<li>Cable</li>
<ul>
<li>Wire arrangement: white, yellow, blue, orange</li>
</ul>
<li>General Data | Cable</li>
<ul>
<li>Cable identification: 796</li>
<li>Jacket color: green</li>
<li>Type of certificate: cURus</li>
</ul>
<li>Structure | Cable</li>
<ul>
<li>Amount stranding: 1</li>
<li>Stranding: 4 wires around core filler twisted</li>
<li>Cable shielding (type): copper braid, tinned</li>
<li>Cable shielding (coverage): 85 %</li>
<li>Banding: Fleece, foil</li>
<li>Filler: yes</li>
</ul>
<li>Mechanical Data | Cable</li>
<ul>
<li>Cable weight: 69,3 g/m</li>
<li>Material jacket: PUR</li>
<li>Shore hardness jacket: 89 Shore A</li>
<li>Freedom from ingredients (jacket): lead-free, cadmium-free, CFC-free, halogen-free, silicone-free</li>
<li>Outer diameter (jacket): 6,7 mm</li>
<li>Tolerance outer diameter (sheath): ± 5 %</li>
<li>Material inner jacket: FRNC</li>
<li>Color (inner jacket): natur</li>
<li>Material wire insulation: PE</li>
<li>Amount wires: 4</li>
<li>Outer diameter insulation: 1,4 mm</li>
<li>Outer diameter tolerance core insulation: ± 5 %</li>
<li>Shore hardness wire insulation: 65 Shore D</li>
<li>Ingredient freeness wire insulation: lead-free, CFC-free, halogen-free</li>
<li>Amount strands (wire): 7</li>
<li>Diameter of single wires: 22 AWG</li>
<li>Conductor cross-section (wire): 22 AWG</li>
<li>Material conductor wire: Stranded copper wire, bare</li>
</ul>
<li>Electrical Data | Cable</li>
<ul>
<li>Nominal voltage AC max.: 300 V</li>
<li>Current load capacity (standard): to DIN VDE 0298-4</li>
<li>Current load capacity min. wire: 4,8 A</li>
<li>Characteristic impedance: 100 Ω ± 15 % @ 100 MHz</li>
<li>Electrical resistance line constant wire: 55 Ω/km @ 20 °C</li>
<li>AC withstand voltage (wire - wire): 2 kV @ 60 s</li>
<li>Electrical capacity line constant (wire - wire): 50000 pF/km</li>
<li>Power frequency withstand voltage (wire - jacket): 2 kV @ 60 s</li>
<li>AC withstand voltage (wire - shield): 2 kV @ 60 s</li>
<li>Isolation resistance: 5000 MΩ × km</li>
</ul>
<li>Temperature Range | Cable</li>
<ul>
<li>Min. operating temperature (static): -40 °C</li>
<li>Max. operating temperature (fixed): 80 °C</li>
<li>Operating temperature min. (dynamic): -30 °C</li>
<li>Operating temperature max. (dynamic): 70 °C</li>
</ul>
<li>Resistances | Cable</li>
<ul>
<li>Flame resistance: IEC 60332-2-2 | UL 1581 § 1090 | UL 1581 § 1100 FT2</li>
<li>Chemical resistance: Good, application-related testing</li>
<li>Gasoline resistance: Good, application-related testing</li>
<li>Oil resistance: DIN EN 60811-404 | Good, application-related testing</li>
</ul>
<li>Installation | Cable</li>
<ul>
<li>Bending radius (fixed): 5 x Outer diameter</li>
<li>Bending radius (dynamic): 12 x Outer diameter</li>
<li>No. of bending cycles (C-track): 3 Mio. @ 25 °C</li>
<li>Traversing distance (C-track): 5 m @ 25 °C</li>
<li>Travel speed (C-track): 3,3 m/s @ 25 °C</li>
<li>No. of torsion cycles: 1 Mio. @ 25 °C</li>
<li>Torsion stress: ± 180 °/m</li>
</ul>
</ul>

Murr Elektronik 7000-74301-7960100 RJ45 Male 0° / RJ45 Male 0° Shielded CAT5 (1m)

murr elektronik 7000-74301-7960100 rj45 male 0° shielded cat5 (1m) pria terlindung accessories aksesoris berlindung aksesori elektronik/穆尔电子 公头 屏蔽 it配件 穆尔电子