BOXO

CLE-LINE

ELORA

FORCE

LUCECO

Lumberg Automation

MULTICOMP

SECFETRONIK

Spears

WIHA

Electrical Connectors

electrical-connectors

Circular Connectors

circular-connectors

Spanners & Sockets

spanners-sockets

Hex Keys & Sets

hex-keys-sets

Impact Sockets

impact-sockets

Drilling

drilling

Jobber Drills

jobber-drills

Electricals

electricals

Mechanical Parts

mechanical-parts

O Ring

o-ring

Open End Spanners

open-end-spanners

Pliers

pliers

Pincers

pincers

Plumbing & Sanitary

plumbing-sanitary

Pipe Elbow

pipe-elbow

Ring Spanners

ring-spanners

Roller Bearing

roller-bearing

Screwdrivers & Screw Extractors

screwdrivers-screw-extractors

Screwdriver Sets

screwdriver-sets

Screwdrivers

screwdrivers

Sensors & Transducers

sensors-transducers

Sensor Connectors

sensor-connectors

Socket Adapters

socket-adapters

Sockets

sockets

Lightings

lightings

Work Lights

work-lights

Material :  Viton Fluoroelastomers (FKM) 75 Shore   

Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.

This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).

In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. 

The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P265 ID 264.50 x CS 8.40Material : Viton Fluoroelastomers (FKM) 75 Shore Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15&#x60;C to 199&#x60;C).In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.Temperature Range (Dry Heat)Low: -5&#x60;F / -15&#x60;C High: 390&#x60;F / 199&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - ExcellentTear Strength – GoodFuel Resistance - GoodHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - GoodAmmonia, Amines, Alkalis - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/6I~N7ytHdd7lOAN5eq3iyx.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P265&nbsp;
ID 264.50 x CS 8.40
Material : Viton Fluoroelastomers (FKM) 75 Shore&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.
This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).
In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings.&nbsp;
The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.
<ins>Temperature Range (Dry Heat)</ins>
Low: -5`F / -15`C High: 390`F / 199`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Excellent
Tear Strength – Good
Fuel Resistance - Good
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Good
Ammonia, Amines, Alkalis - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:9n7i7"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/6I~N7ytHdd7lOAN5eq3iyx.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9n7i7" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ORING JIS B2401 P265 ID 264.50 x CS 8.40 Viton Fluoroelastomers (FKM) 75 Shore

oring jis b2401 p265 id 264.50 cs 8.40 viton fluoroelastomers (fkm) 75 shore fluoroelastomer ring o-ring oem gelang oem/oem代工 8.40氟橡胶（fkm）75肖氏 o型圈 oem代工

oring-jis-b2401-p265-id-264-50-x-cs-8-40-viton-fluoroelastomers-fkm-75-shore

Lumberg Automation 2648 RST 5-56/20 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Straight, 5-pin, A-coded, Orange Body, 50 V Ac / 60 V Dc, 4 A; Pvc Orange Cable, 5-wires, 0.34 Mm² 

Ambient Temperature (Fixed Installation): -40 °C - +80 °C

Ambient Temperature (Flexible Installation): +5 °C - +80 °C

Ambient Temperature (Drag Chain Installation): +5 °C - +60 °C

Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1

LABS-free: No lacquer wetting disturbing substances

Oil Resistance: Good chemical and oil resistance

Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.

<h3 class="md-block-header-three">Lumberg Automation 2648 RST 5-56/20 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Straight, 5-pin, A-coded, Orange Body, 50 V Ac / 60 V Dc, 4 A; Pvc Orange Cable, 5-wires, 0.34 Mm² </h3><h3 class="md-block-header-three">Cable Data:</h3><ul class="md-block-unordered-list-item"><li>Conductor Material: Cu (Copper)</li><li>Cable Jacket Material: PVC Class 43</li><li>Cable Jacket Color: Orange</li><li>Cable Diameter (D): ø 5.70 ± 0.20 mm</li><li>Wire Insulation Material: PVC Class 43</li><li>Insulated Wire Diameter: ø 1.50 mm</li><li>Ambient Temperature (Fixed Installation): -40 °C - +80 °C</li><li>Ambient Temperature (Flexible Installation): +5 °C - +80 °C</li><li>Ambient Temperature (Drag Chain Installation): +5 °C - +60 °C</li><li>UL Cable Type: AWM: 2464</li><li>Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1</li></ul><h3 class="md-block-header-three">Cable Characteristics:</h3><ul class="md-block-unordered-list-item"><li>LABS-free: No lacquer wetting disturbing substances</li><li>Exclusion of Silicone: Yes</li></ul><h3 class="md-block-header-three">Approvals:</h3><ul class="md-block-unordered-list-item"><li>UL-File: E315587</li><li>UL Standards: UL 2238; cURus</li></ul><h3 class="md-block-header-three">Safety &amp; Environmental Compliance:</h3><ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li><li>Oil Resistance: Good chemical and oil resistance</li></ul><h3 class="md-block-header-three">Notes:</h3><ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li><li>Do not connect or disconnect under load.</li></ul><h3 class="md-block-header-three">Part Numbers &amp; Cable Lengths:</h3><ul class="md-block-unordered-list-item"><li>608: RST 5-56/15 M - 15 m (4 A)</li><li>2648: RST 5-56/20 M - 20 m (4 A)</li><li>12015: RST 5-56/10 M - 10 m (4 A)</li><li>12016: RST 5-56/2 M - 2 m (4 A)</li></ul>

<h3>Lumberg Automation 2648 RST 5-56/20 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Straight, 5-pin, A-coded, Orange Body, 50 V Ac / 60 V Dc, 4 A; Pvc Orange Cable, 5-wires, 0.34 Mm²&nbsp;</h3>
<h3>Cable Data:</h3>
<ul>
<li>Conductor Material: Cu (Copper)</li>
<li>Cable Jacket Material: PVC Class 43</li>
<li>Cable Jacket Color: Orange</li>
<li>Cable Diameter (D): ø 5.70 ± 0.20 mm</li>
<li>Wire Insulation Material: PVC Class 43</li>
<li>Insulated Wire Diameter: ø 1.50 mm</li>
<li>Ambient Temperature (Fixed Installation): -40 °C - +80 °C</li>
<li>Ambient Temperature (Flexible Installation): +5 °C - +80 °C</li>
<li>Ambient Temperature (Drag Chain Installation): +5 °C - +60 °C</li>
<li>UL Cable Type: AWM: 2464</li>
<li>Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2, UL VW-1</li>
</ul>
<h3>Cable Characteristics:</h3>
<ul>
<li>LABS-free: No lacquer wetting disturbing substances</li>
<li>Exclusion of Silicone: Yes</li>
</ul>
<h3>Approvals:</h3>
<ul>
<li>UL-File: E315587</li>
<li>UL Standards: UL 2238; cURus</li>
</ul>
<h3>Safety &amp; Environmental Compliance:</h3>
<ul>
<li>RoHS Compliant: Yes</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
<h3>Notes:</h3>
<ul>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
<li>Do not connect or disconnect under load.</li>
</ul>
<h3>Part Numbers &amp; Cable Lengths:</h3>
<ul>
<li>608: RST 5-56/15 M - 15 m (4 A)</li>
<li>2648: RST 5-56/20 M - 20 m (4 A)</li>
<li>12015: RST 5-56/10 M - 10 m (4 A)</li>
<li>12016: RST 5-56/2 M - 2 m (4 A)</li>
</ul>

Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

Lumberg Automation 2648 RST 5-56/20 M M12 Standard Sensor/Actuator Single-Ended Cordset: Male, Straight, 5-pin, A-coded, Orange Body, 50 V Ac / 60 V Dc, 4 A; Pvc Orange Cable, 5-wires, 0.34 Mm²

lumberg automation 2648 rst 5-56/20 m12 standard sensor/actuator single-ended cordset: male, straight, 5-pin, a-coded, orange body, 50 ac 60 dc, a; pvc cable, 5-wires, 0.34 mm² kabel orange, sensor connectors automasi penderia/penggerak piawai kord berakhir tunggal: lelaki, lurus, berkod a, badan jingga, jingga pvc, wayar, automation/隆堡自动化 标准传感器/执行器单端线组：公头，直型，5 针，a 编码，橙色主体，50 交流/60 直流，4 a；pvc 橙色电缆，5 线，0.34 隆堡自动化

lumberg-automation-2648-rst-5-56-20-m-m12-standard-sensor-actuator-single-ended-cordset-male-straight-5-pin-a-coded-orange-body-50-v-ac-60-v-dc-4-a-pvc-orange-cable-5-wires-0-34-mm

Elora 988-10 Deep Cranked VDE Single End Ring Spanner

Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V
Elora Chrome-Vanadium 31CrV3 / 1.2208

Elora 988-11 Deep Cranked VDE Single End Ring Spanner

Elora 988-12 Deep Cranked VDE Single End Ring Spanner

Elora 988-13 Deep Cranked VDE Single End Ring Spanner

Elora 988-14 Deep Cranked VDE Single End Ring Spanner

Elora 988-15 Deep Cranked VDE Single End Ring Spanner

Elora 988-17 Deep Cranked VDE Single End Ring Spanner

Elora 988-19 Deep Cranked VDE Single End Ring Spanner

Elora 988-22 Deep Cranked VDE Single End Ring Spanner

Elora 988-24 Deep Cranked VDE Single End Ring Spanner

<h3 class="md-block-header-three">Elora 988-10 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000102100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 10</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 165</li><li>Weight g:- 80</li></ul> <h3 class="md-block-header-three">Elora 988-11 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000112100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 11</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 175</li><li>Weight g:- 100</li></ul> <h3 class="md-block-header-three">Elora 988-12 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000122100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 12</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 185</li><li>Weight g:- 110</li></ul> <h3 class="md-block-header-three">Elora 988-13 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000132100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 13</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 195</li><li>Weight g:- 120</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 988-14 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000142100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 14</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 200</li><li>Weight g:- 150</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 988-15 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000152100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 15</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 205</li><li>Weight g:- 155</li></ul> <h3 class="md-block-header-three">Elora 988-17 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000172100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 17</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 210</li><li>Weight g:- 180</li></ul> <h3 class="md-block-header-three">Elora 988-19 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000192100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 19</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 230</li><li>Weight g:- 245</li></ul> <h3 class="md-block-header-three">Elora 988-22 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000222100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 22</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 250</li><li>Weight g:- 353</li></ul> <h3 class="md-block-header-three">Elora 988-24 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000242100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 24</li><li>1000 V:- x</li><li>VDE:- x</li><li>GS:- x</li><li>Length mm:- 260</li><li>Weight g:- 357</li></ul> <h3 class="md-block-header-three">Elora 988-27 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000272100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 27</li><li>1000 V:- x</li><li>VDE:- –</li><li>GS:- –</li><li>Length mm:- 280</li><li>Weight g:- 438</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 988-30 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000302100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 30</li><li>1000 V:- x</li><li>VDE:- –</li><li>GS:- –</li><li>Length mm:- 280</li><li>Weight g:- 454</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 988-32 Deep Cranked VDE Single End Ring Spanner</h3><h3 class="md-block-header-three">Product code: 988000322100 </h3><ul class="md-block-unordered-list-item"><li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V Elora Chrome-Vanadium 31CrV3 / 1.2208</li><li>Size mm:- 32</li><li>1000 V:- x</li><li>VDE:- –</li><li>GS:- –</li><li>Length mm:- 300</li><li>Weight g:- 580</li></ul>

<h3>Elora 988-10 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000102100 </h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 10</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 165</li>
<li>Weight g:- 80</li>
</ul>
&nbsp;
<h3>Elora 988-11 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000112100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 11</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 175</li>
<li>Weight g:- 100</li>
</ul>
&nbsp;
<h3>Elora 988-12 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000122100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 12</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 185</li>
<li>Weight g:- 110</li>
</ul>
&nbsp;
<h3>Elora 988-13 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000132100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 13</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 195</li>
<li>Weight g:- 120</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 988-14 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000142100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 14</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 200</li>
<li>Weight g:- 150</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 988-15 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000152100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 15</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 205</li>
<li>Weight g:- 155</li>
</ul>
&nbsp;
<h3>Elora 988-17 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000172100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 17</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 210</li>
<li>Weight g:- 180</li>
</ul>
&nbsp;
<h3>Elora 988-19 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000192100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 19</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 230</li>
<li>Weight g:- 245</li>
</ul>
&nbsp;
<h3>Elora 988-22 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000222100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 22</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 250</li>
<li>Weight g:- 353</li>
</ul>
&nbsp;
<h3>Elora 988-24 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000242100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 24</li>
<li>1000 V:- x</li>
<li>VDE:- x</li>
<li>GS:- x</li>
<li>Length mm:- 260</li>
<li>Weight g:- 357</li>
</ul>
&nbsp;
<h3>Elora 988-27 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000272100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 27</li>
<li>1000 V:- x</li>
<li>VDE:- –</li>
<li>GS:- –</li>
<li>Length mm:- 280</li>
<li>Weight g:- 438</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 988-30 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000302100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 30</li>
<li>1000 V:- x</li>
<li>VDE:- –</li>
<li>GS:- –</li>
<li>Length mm:- 280</li>
<li>Weight g:- 454</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 988-32 Deep Cranked VDE Single End Ring Spanner</h3>
<h3>Product code: 988000322100&nbsp;&nbsp;</h3>
<ul>
<li>Description:- 2-colour-multilayer isolation (yellow, red) for easy identification of insulation damages 
VDE insulation up to 1.000V, Conforms to EN 60900/IEC 60900:2004 
tested Conforms to EN/IEC 60900:2004, individually tested with 10.000V and approved for 1.000V 
Elora Chrome-Vanadium 31CrV3 / 1.2208</li>
<li>Size mm:- 32</li>
<li>1000 V:- x</li>
<li>VDE:- –</li>
<li>GS:- –</li>
<li>Length mm:- 300</li>
<li>Weight g:- 580</li>
</ul>

Ian Ong

WEICON

LOCTITE

METABO

Permatex

Fujiplus

DEVCON

Molykote

Adhesive Glue

Sealants

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

Elora 988 Deep Cranked Vde Single End Ring Spanner

elora 988 deep cranked vde single end ring spanner spanners kunci cincin akhir tunggal cranks spanar elora/埃洛拉 988深曲柄vde单端环扳手 环扳手 埃洛拉

elora-988-deep-cranked-vde-single-end-ring-spanner

Elora 988-27 Deep Cranked VDE Single End Ring Spanner

Elora 988-30 Deep Cranked VDE Single End Ring Spanner

Elora 988-32 Deep Cranked VDE Single End Ring Spanner

Sizes

Technical Data Sheet (126.94KB) EN

MULTICOMP PRO

Surface Mount Resistors

Multilayer Ceramic Capacitors

Through Hole Resistors

Hook Up Wires

Junction & Enclosure Box

PCB Headers

Crystal Units

Fixed Resistors

Heat-Shrinkable Tube

Element14

Multicomp SPC10879 Conn, Terminal, Compression Lug, 0.264IN, Solder

multicomp spc10879 conn, terminal, compression lug, 0.264in, solder sambungan, lug kompresi, 0,264in, mampatan, pateri 连接器，端子，压缩接线片，0.264in，焊接 接线片' 多电脑

multicomp-spc10879-conn-terminal-compression-lug-0-264in-solder

Force 79646 Slugging open-end Wrench 46mm

These Force Tools individual slugging open-end wrench are made to the highest quality. Made from high quality Chrome Molybdenum Steel (with a black phosphate finish) which provides high resistance against corrosion and increases strength & durability.

<h3 class="md-block-header-three">Force 79646 Slugging open-end Wrench 46mm</h3>DescriptionThese Force Tools individual slugging open-end wrench are made to the highest quality. Made from high quality Chrome Molybdenum Steel (with a black phosphate finish) which provides high resistance against corrosion and increases strength &amp; durability.

<h3>Force 79646 Slugging open-end Wrench 46mm</h3>
Description
These Force Tools individual slugging open-end wrench are made to the highest quality. Made from high quality Chrome Molybdenum Steel (with a black phosphate finish) which provides high resistance against corrosion and increases strength &amp; durability.

SATA

Nexus

Socket Sets

Flank Sockets

Combination Spanners

Screwdriver Bits & Bit Set

Mr Jones Ong

force 79646 slugging open-end wrench 46mm kunci pas ujung terbuka open end spanners sepana hujung force/力量 敲击开口扳手 开口扳手 力量

force-79646-slugging-open-end-wrench-46mm

Luceco 9w Portable Led Clamp Work Light LCWR9G60-1A

Professional LED work light with heavy-duty clamp, stand and carry handle

Robust polycarbonate construction for increased durability with 4-hour battery life at full brightness

<h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Luceco 9w Portable Led Clamp Work Light LCWR9G60-1A</h3> <h2 class="md-block-header-two">Features</h2><ol class="md-block-ordered-list-item"><li>Professional LED work light with heavy-duty clamp, stand and carry handle</li><li>Robust polycarbonate construction for increased durability with 4-hour battery life at full brightness</li><li>Two operating modes high and low output supplied with charging adapter </li></ol> Technical DataPart No: LCWR9G60Driver: Rechargeable, 4400mAhLumens: 900Power: 9Luminaire Efficacy: 100Colour Temp (k): 6000CRI: &gt;80Warranty (years): 2Finish: Green Performance &amp; SafetyLife time (hours): 30000Temperature range: 0°C + 25°CApproval: CEElectrical Class: 3 Construction &amp; InstallationLength (mm): 96Width (mm): 189Height (mm): 264Weight(kg): 0.9Ingress Protection: IP54Impact Resistance: IK07

<h3> </h3>
<h3>Luceco 9w Portable Led Clamp Work Light LCWR9G60-1A</h3>

<h2>Features</h2>
<ol>
<li>Professional LED work light with heavy-duty clamp, stand and carry handle</li>
<li>Robust polycarbonate construction for increased durability with 4-hour battery life at full brightness</li>
<li>Two operating modes high and low output supplied with charging adapter&nbsp;</li>
</ol>

Technical Data
Part No: LCWR9G60
Driver: Rechargeable, 4400mAh
Lumens: 900
Power: 9
Luminaire Efficacy: 100
Colour Temp (k): 6000
CRI: &gt;80
Warranty (years): 2
Finish: Green

Performance &amp; Safety
Life time (hours): 30000
Temperature range: 0°C + 25°C
Approval: CE
Electrical Class: 3

Construction &amp; Installation
Length (mm): 96
Width (mm): 189
Height (mm): 264
Weight(kg): 0.9
Ingress Protection: IP54
Impact Resistance: IK07