Hirschmann

Lumberg Automation

Mechanical Parts

mechanical-parts

O Ring

o-ring

Electrical Connectors

electrical-connectors

Valve Connectors

valve-connectors

Lumberg Automation 7874 VAD 1A-3-3-212/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 230 V , 4 A; Pvc Black Cable

Ambient Temperature (Operation): -25°C to +80°C

Protection Degree / IP Rating: IP65, IP67

Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)

Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1

Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)

Flammability Class (Contact Bearer): UL 94 V-0

Flammability Class (Molded Body): UL 94 HB

Attachment Material: Steel, Philips combi slot

Gasket Material: Molded Integrated Gasket

Fastening Torque (Attachment): (50-60) Ncm

Minimal Bending Radius (Fixed Installation): ˃ 5 x D

Minimal Bending Radius (Flexible Installation): ˃ 10 x D

Ambient Temperature (Fixed Installation): - 40 °C - + 70 °C

Ambient Temperature (Flexible Installation): + 5 °C - + 70 °C

Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2

Cable Characteristics: Free of lacquer wetting disturbing substances; Exclusion of silicone

Oil Resistance: Good chemical and oil resistance

Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.

<h3 class="md-block-header-three">Lumberg Automation 7874 VAD 1A-3-3-212/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 230 V , 4 A; Pvc Black Cable</h3>Cable length: 10m <ul class="md-block-unordered-list-item"><li>Product Family: Valve Connectors</li><li>Product Sub Family: VAD</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Angled</li><li>Number of Pins: 2+2PE</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Central Screw</li><li>Rated Voltage: 230 V AC/DC</li><li>Rated Impulse Voltage: 4.0 kV</li><li>Operating Voltage: 230 V AC/DC</li><li>Rated Current: 4 A</li><li>Contact Resistance: ≤ 5 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: max. 50</li><li>Ambient Temperature (Operation): -25°C to +80°C</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Design Standard: DIN EN 175301-803-A</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Plating: Cu/Ni, Sn</li><li>Contact Bearer Material: PBT</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Translucent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: Steel, Philips combi slot</li><li>Gasket Material: Molded Integrated Gasket</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Function Indicator: Yellow LED</li><li>Protective Circuit: Varistor</li><li>Fastening Torque (Attachment): (50-60) Ncm</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 212</li><li>Conductor Size: 0.5 mm²</li><li>Number of Wires: 3</li><li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PVC</li><li>Cable Jacket Color: Black</li><li>Cable Diameter D: ø 5.0 ± 0.2 mm</li><li>Wire Insulation Material: PVC</li><li>Insulated Wire Diameter: ø 1.70 mm</li><li>Ambient Temperature (Fixed Installation): - 40 °C - + 70 °C</li><li>Ambient Temperature (Flexible Installation): + 5 °C - + 70 °C</li><li>Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2</li><li>Cable Characteristics: Free of lacquer wetting disturbing substances; Exclusion of silicone</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: No</li><li>Oil Resistance: Good chemical and oil resistance</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li></ul>

<h3>Lumberg Automation 7874 VAD 1A-3-3-212/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 230 V , 4 A; Pvc Black Cable</h3>
Cable length: 10m&nbsp;
<ul>
<li>Product Family: Valve Connectors</li>
<li>Product Sub Family: VAD</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 2+2PE</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Central Screw</li>
<li>Rated Voltage: 230 V AC/DC</li>
<li>Rated Impulse Voltage: 4.0 kV</li>
<li>Operating Voltage: 230 V AC/DC</li>
<li>Rated Current: 4 A</li>
<li>Contact Resistance: ≤ 5 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: max. 50</li>
<li>Ambient Temperature (Operation): -25°C to +80°C</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Design Standard: DIN EN 175301-803-A</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Plating: Cu/Ni, Sn</li>
<li>Contact Bearer Material: PBT</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Translucent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: Steel, Philips combi slot</li>
<li>Gasket Material: Molded Integrated Gasket</li>
</ul>
Circuitry
<ul>
<li>Function Indicator: Yellow LED</li>
<li>Protective Circuit: Varistor</li>
<li>Fastening Torque (Attachment): (50-60) Ncm</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 212</li>
<li>Conductor Size: 0.5 mm²</li>
<li>Number of Wires: 3</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PVC</li>
<li>Cable Jacket Color: Black</li>
<li>Cable Diameter D: ø 5.0 ± 0.2 mm</li>
<li>Wire Insulation Material: PVC</li>
<li>Insulated Wire Diameter: ø 1.70 mm</li>
<li>Ambient Temperature (Fixed Installation): - 40 °C - + 70 °C</li>
<li>Ambient Temperature (Flexible Installation): + 5 °C - + 70 °C</li>
<li>Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2</li>
<li>Cable Characteristics: Free of lacquer wetting disturbing substances; Exclusion of silicone</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: No</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
</ul>

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

lumberg automation 7874 vad 1a-3-3-212/10 din standard single-ended cordset: form a, 3-pin (2+2pe), grey translucent body, varistor yellow led, 230 a; pvc black cable kabel standar single-ended: bentuk badan transparan abu-abu, dengan dan led kuning, v, hitam valve connectors automasi kord berakhir satu: borang lutsinar kelabu, lumberg/隆堡 标准单端电线组：a 型，3 (2+2pe)，灰色半透明主体，带压敏电阻和黄色 led，230 v，4 a；pvc 黑色电缆 隆堡自动化

lumberg-automation-7874-vad-1a-3-3-212-10-m-vad-din-standard-single-ended-cordset-form-a-3-pin-2-2pe-grey-translucent-body-with-varistor-and-yellow-led-230-v-4-a-pvc-black-cable

Lumberg Automation 30523 VAD 1F-4-3-226/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Recovery Diode and Yellow Led, 24 V , 4 A; Pur Black Cable

Ambient Temperature (Fixed Installation): -50°C to +105°C (UL: +80°C)

Ambient Temperature (Flexible Installation): -25°C to +105°C (UL: +80°C)

Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2

Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances

<h3 class="md-block-header-three">Lumberg Automation 30523 VAD 1F-4-3-226/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Recovery Diode and Yellow Led, 24 V , 4 A; Pur Black Cable</h3>Cable length: 10 m <ul class="md-block-unordered-list-item"><li>Product Family: Valve Connectors</li><li>Product Sub Family: VAD</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Angled</li><li>Number of Pins: 2+2PE</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Central Screw</li><li>Rated Voltage: 24 DC</li><li>Rated Impulse Voltage: 4.0 kV</li><li>Operating Voltage: 24 V DC</li><li>Rated Current: 4 A</li><li>Contact Resistance: ≤ 5 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: max. 50</li><li>Ambient Temperature (Operation): -25°C to +80°C</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Design Standard: DIN EN 175301-803-A</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Base Material: CuZn</li><li>Contact Plating: Cu/Ni, Sn</li><li>Contact Bearer Material: PBT</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Translucent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: Steel, Philips combi slot</li><li>Gasket Material: Molded Integrated Gasket</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Function Indicator: Yellow LED</li><li>Protective Circuit: Recovery Diode</li><li>Fastening Torque (Attachment): (50-60) Ncm</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 226</li><li>Conductor Size: 0.5 mm²</li><li>Number of Wires: 3</li><li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li><li>Cycles (Bending): ˃ 5 M</li><li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Black</li><li>Cable Diameter D: ø 4.6 ± 0.2 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: ø 1.50 mm</li><li>Ambient Temperature (Fixed Installation): -50°C to +105°C (UL: +80°C)</li><li>Ambient Temperature (Flexible Installation): -25°C to +105°C (UL: +80°C)</li><li>UL Cable Type: AWM: 20549</li><li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li><li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: No</li><li>Oil Resistance: Good chemical and oil resistance</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li></ul>

<h3>Lumberg Automation 30523 VAD 1F-4-3-226/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Recovery Diode and Yellow Led, 24 V , 4 A; Pur Black Cable</h3>
Cable length: 10 m&nbsp;
<ul>
<li>Product Family: Valve Connectors</li>
<li>Product Sub Family: VAD</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 2+2PE</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Central Screw</li>
<li>Rated Voltage: 24 DC</li>
<li>Rated Impulse Voltage: 4.0 kV</li>
<li>Operating Voltage: 24 V DC</li>
<li>Rated Current: 4 A</li>
<li>Contact Resistance: ≤ 5 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: max. 50</li>
<li>Ambient Temperature (Operation): -25°C to +80°C</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Design Standard: DIN EN 175301-803-A</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Base Material: CuZn</li>
<li>Contact Plating: Cu/Ni, Sn</li>
<li>Contact Bearer Material: PBT</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Translucent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: Steel, Philips combi slot</li>
<li>Gasket Material: Molded Integrated Gasket</li>
</ul>
Circuitry
<ul>
<li>Function Indicator: Yellow LED</li>
<li>Protective Circuit: Recovery Diode</li>
<li>Fastening Torque (Attachment): (50-60) Ncm</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 226</li>
<li>Conductor Size: 0.5 mm²</li>
<li>Number of Wires: 3</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li>
<li>Cycles (Bending): ˃ 5 M</li>
<li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Black</li>
<li>Cable Diameter D: ø 4.6 ± 0.2 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: ø 1.50 mm</li>
<li>Ambient Temperature (Fixed Installation): -50°C to +105°C (UL: +80°C)</li>
<li>Ambient Temperature (Flexible Installation): -25°C to +105°C (UL: +80°C)</li>
<li>UL Cable Type: AWM: 20549</li>
<li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li>
<li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: No</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
</ul>

lumberg automation 30523 vad 1f-4-3-226/10 din standard single-ended cordset: form a, 3-pin (2+2pe), grey translucent body, recovery diode yellow led, 24 a; pur black cable kabel standar single-ended: bentuk badan transparan abu-abu, dengan dioda pemulihan dan led kuning, v, hitam valve connectors automasi kord berakhir tunggal: borang lutsinar kelabu, diod lumberg/隆堡 标准单端电线：a 型，3 (2+2pe)，灰色半透明主体，带恢复二极管和黄色 led，24 v，4 a；纯黑色电缆 隆堡自动化

lumberg-automation-30523-vad-1f-4-3-226-10-m-vad-din-standard-single-ended-cordset-form-a-3-pin-2-2pe-grey-translucent-body-with-recovery-diode-and-yellow-led-24-v-4-a-pur-black-cable

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P285 ID 284.50 x CS 8.40Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P285&nbsp;
ID 284.50 x CS 8.40
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ORING JIS B2401 P285 ID 284.50 x CS 8.40 Nitrile (NBR) 90 Shore

oring jis b2401 p285 id 284.50 cs 8.40 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 8.40丁腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-p285-id-284-50-x-cs-8-40-nitrile-nbr-90-shore

Lumberg Automation 54614 VAD 1A-2-3-212/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 110 V , 4 A; Pvc Black Cable

Minimal Bending Radius (Fixed Inst): ˃ 5 x D

Minimal Bending Radius (Flexible Inst): ˃ 10 x D

Ambient Temperature (Fixed Installation): -40 °C - +70 °C

Ambient Temperature (Flex Installation): +5 °C - +70 °C

Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.

<h3 class="md-block-header-three">Lumberg Automation 54614 VAD 1A-2-3-212/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 110 V , 4 A; Pvc Black Cable</h3>Cable length: 10m <ul class="md-block-unordered-list-item"><li>Product Family: Valve Connectors</li><li>Product Sub Family: VAD</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Angled</li><li>Number of Pins: 2+2PE</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Central Screw</li><li>Rated Voltage: 110 V AC/DC</li><li>Rated Impulse Voltage: 4.0 kV</li><li>Operating Voltage: 110 V AC/DC</li><li>Rated Current: 4 A</li><li>Contact Resistance: ≤ 5 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: max. 50</li><li>Ambient Temperature (Operation): -25°C to +80°C</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Design Standard: DIN EN 175301-803-A</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Plating: Cu/Ni,Sn</li><li>Contact Bearer Material: PBT</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Transluscent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: Steel, Philips combi slot</li><li>Gasket Material: Molded Integrated Gasket</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Function Indicator: Yellow LED</li><li>Protective Circuit: Varistor</li><li>Fastening Torque (Attachment): (50-60) Ncm</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 212</li><li>Conductor Size: 0.5 mm²</li><li>Number of Wires: 3</li><li>Minimal Bending Radius (Fixed Inst): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Inst): ˃ 10 x D</li><li>Conductor material: Cu</li><li>Cable Jacket Material: PVC</li><li>Cable Jacket Color: black</li><li>Cable Diameter D: ø 5.0 ± 0.2 mm</li><li>Wire Insulation Material: PVC</li><li>Insulated Wire Diameter: ø 1.70 mm</li><li>Ambient Temperature (Fixed Installation): -40 °C - +70 °C</li><li>Ambient Temperature (Flex Installation): +5 °C - +70 °C</li><li>Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2</li><li>Cable Characteristics: Free of lacquer wetting disturbing substances; Exclusion of silicone</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: no</li><li>Oil Resistance: Good chemical and oil resistance</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li></ul>

<h3>Lumberg Automation 54614 VAD 1A-2-3-212/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 110 V , 4 A; Pvc Black Cable</h3>
Cable length: 10m&nbsp;
<ul>
<li>Product Family: Valve Connectors</li>
<li>Product Sub Family: VAD</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 2+2PE</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Central Screw</li>
<li>Rated Voltage: 110 V AC/DC</li>
<li>Rated Impulse Voltage: 4.0 kV</li>
<li>Operating Voltage: 110 V AC/DC</li>
<li>Rated Current: 4 A</li>
<li>Contact Resistance: ≤ 5 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: max. 50</li>
<li>Ambient Temperature (Operation): -25°C to +80°C</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Design Standard: DIN EN 175301-803-A</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Plating: Cu/Ni,Sn</li>
<li>Contact Bearer Material: PBT</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Transluscent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: Steel, Philips combi slot</li>
<li>Gasket Material: Molded Integrated Gasket</li>
</ul>
Circuitry
<ul>
<li>Function Indicator: Yellow LED</li>
<li>Protective Circuit: Varistor</li>
<li>Fastening Torque (Attachment): (50-60) Ncm</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 212</li>
<li>Conductor Size: 0.5 mm²</li>
<li>Number of Wires: 3</li>
<li>Minimal Bending Radius (Fixed Inst): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Inst): ˃ 10 x D</li>
<li>Conductor material: Cu</li>
<li>Cable Jacket Material: PVC</li>
<li>Cable Jacket Color: black</li>
<li>Cable Diameter D: ø 5.0 ± 0.2 mm</li>
<li>Wire Insulation Material: PVC</li>
<li>Insulated Wire Diameter: ø 1.70 mm</li>
<li>Ambient Temperature (Fixed Installation): -40 °C - +70 °C</li>
<li>Ambient Temperature (Flex Installation): +5 °C - +70 °C</li>
<li>Flammability Class (Cable Jacket): DIN EN 60332-1-2, VDE 0482-332-1-2, IEC 60332-1-2</li>
<li>Cable Characteristics: Free of lacquer wetting disturbing substances; Exclusion of silicone</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: no</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
</ul>

lumberg automation 54614 vad 1a-2-3-212/10 din standard single-ended cordset: form a, 3-pin (2+2pe), grey translucent body, varistor yellow led, 110 a; pvc black cable kabel standar single-ended: bentuk badan transparan abu-abu, dengan dan led kuning, v, hitam valve connectors automasi kord satu hujung: borang lutsinar kelabu, lumberg/隆堡 标准单端电线组：a 型，3 (2+2pe)，灰色半透明主体，带压敏电阻和黄色 led，110 v，4 a；pvc 黑色电缆 隆堡自动化

lumberg-automation-54614-vad-1a-2-3-212-10-m-vad-din-standard-single-ended-cordset-form-a-3-pin-2-2pe-grey-translucent-body-with-varistor-and-yellow-led-110-v-4-a-pvc-black-cable

Lumberg Automation 43837 VAD 1A-2-3-226/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 110 V , 4 A; Pur Black Cable

Ambient Temperature (Fixed Installation): - 50 °C - + 105 °C (UL: + 80 °C)

Ambient Temperature (Flexible Installation): - 25 °C - + 105 °C (UL: + 80 °C)

<h3 class="md-block-header-three">Lumberg Automation 43837 VAD 1A-2-3-226/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 110 V , 4 A; Pur Black Cable</h3>Cable length: 10 m <ul class="md-block-unordered-list-item"><li>Product Family: Valve Connectors</li><li>Product Sub Family: VAD</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Angled</li><li>Number of Pins: 2+2PE</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Central Screw</li><li>Rated Voltage: 110 V AC/DC</li><li>Rated Impulse Voltage: 4.0 kV</li><li>Operating Voltage: 110 V AC/DC</li><li>Rated Current: 4 A</li><li>Contact Resistance: ≤ 5 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: max. 50</li><li>Ambient Temperature (Operation): -25°C to +80°C</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Design Standard: DIN EN 175301-803-A</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Plating: Cu/Ni, Sn</li><li>Contact Bearer Material: PBT</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Translucent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: Steel, Philips combi slot</li><li>Gasket Material: Molded Integrated Gasket</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Function Indicator: Yellow LED</li><li>Protective Circuit: Varistor</li><li>Fastening Torque (Attachment): (50-60) Ncm</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 226</li><li>Conductor Size: 0.5 mm²</li><li>Number of Wires: 3</li><li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li><li>Cycles (Bending): ˃ 5 M</li><li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Black</li><li>Cable Diameter D: ø 4.6 ± 0.2 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: ø 1.50 mm</li><li>Ambient Temperature (Fixed Installation): - 50 °C - + 105 °C (UL: + 80 °C)</li><li>Ambient Temperature (Flexible Installation): - 25 °C - + 105 °C (UL: + 80 °C)</li><li>UL Cable Type: AWM: 20549</li><li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li><li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: No</li><li>Oil Resistance: Good chemical and oil resistance</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li></ul>

<h3>Lumberg Automation 43837 VAD 1A-2-3-226/10 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 110 V , 4 A; Pur Black Cable</h3>
Cable length: 10 m&nbsp;
<ul>
<li>Product Family: Valve Connectors</li>
<li>Product Sub Family: VAD</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 2+2PE</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Central Screw</li>
<li>Rated Voltage: 110 V AC/DC</li>
<li>Rated Impulse Voltage: 4.0 kV</li>
<li>Operating Voltage: 110 V AC/DC</li>
<li>Rated Current: 4 A</li>
<li>Contact Resistance: ≤ 5 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: max. 50</li>
<li>Ambient Temperature (Operation): -25°C to +80°C</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Design Standard: DIN EN 175301-803-A</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Plating: Cu/Ni, Sn</li>
<li>Contact Bearer Material: PBT</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Translucent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: Steel, Philips combi slot</li>
<li>Gasket Material: Molded Integrated Gasket</li>
</ul>
Circuitry
<ul>
<li>Function Indicator: Yellow LED</li>
<li>Protective Circuit: Varistor</li>
<li>Fastening Torque (Attachment): (50-60) Ncm</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 226</li>
<li>Conductor Size: 0.5 mm²</li>
<li>Number of Wires: 3</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li>
<li>Cycles (Bending): ˃ 5 M</li>
<li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Black</li>
<li>Cable Diameter D: ø 4.6 ± 0.2 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: ø 1.50 mm</li>
<li>Ambient Temperature (Fixed Installation): - 50 °C - + 105 °C (UL: + 80 °C)</li>
<li>Ambient Temperature (Flexible Installation): - 25 °C - + 105 °C (UL: + 80 °C)</li>
<li>UL Cable Type: AWM: 20549</li>
<li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li>
<li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: No</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
</ul>

lumberg automation 43837 vad 1a-2-3-226/10 din standard single-ended cordset: form a, 3-pin (2+2pe), grey translucent body, varistor yellow led, 110 a; pur black cable bentuk badan transparan abu-abu, dengan dan led kuning, v, kabel hitam valve connectors automasi kord berakhir tunggal: borang lutsinar kelabu, lumberg/隆堡 标准单端电线：a 型，3 (2+2pe)，灰色半透明主体，带压敏电阻和黄色 led，110 v，4 a；纯黑色电缆 隆堡自动化

lumberg-automation-43837-vad-1a-2-3-226-10-m-vad-din-standard-single-ended-cordset-form-a-3-pin-2-2pe-grey-translucent-body-with-varistor-and-yellow-led-110-v-4-a-pur-black-cable

Lumberg Automation 46042 VAD 1A-3-3-226/15 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 230 V , 4 A; Pur Black Cable

<h3 class="md-block-header-three">Lumberg Automation 46042 VAD 1A-3-3-226/15 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 230 V , 4 A; Pur Black Cable</h3>Cable length: 15m <ul class="md-block-unordered-list-item"><li>Product Family: Valve Connectors</li><li>Product Sub Family: VAD</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Angled</li><li>Number of Pins: 2+2PE</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Central Screw</li><li>Rated Voltage: 230 V AC/DC</li><li>Rated Impulse Voltage: 4.0 kV</li><li>Operating Voltage: 230 V AC/DC</li><li>Rated Current: 4 A</li><li>Contact Resistance: ≤ 5 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: max. 50</li><li>Ambient Temperature (Operation): -25°C to +80°C</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Design Standard: DIN EN 175301-803-A</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Plating: Cu/Ni, Sn</li><li>Contact Bearer Material: PBT</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Translucent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: Steel, Philips combi slot</li><li>Gasket Material: Molded Integrated Gasket</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Function Indicator: Yellow LED</li><li>Protective Circuit: Varistor</li><li>Fastening Torque (Attachment): (50-60) Ncm</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 226</li><li>Conductor Size: 0.5 mm²</li><li>Number of Wires: 3</li><li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li><li>Cycles (Bending): ˃ 5 M</li><li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Black</li><li>Cable Diameter D: ø 4.6 ± 0.2 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: ø 1.50 mm</li><li>Ambient Temperature (Fixed Installation): - 50 °C - + 105 °C (UL: + 80 °C)</li><li>Ambient Temperature (Flexible Installation): - 25 °C - + 105 °C (UL: + 80 °C)</li><li>UL Cable Type: AWM: 20549</li><li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li><li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: No</li><li>Oil Resistance: Good chemical and oil resistance</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li></ul>

<h3>Lumberg Automation 46042 VAD 1A-3-3-226/15 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Varistor and Yellow Led, 230 V , 4 A; Pur Black Cable</h3>
Cable length: 15m&nbsp;
<ul>
<li>Product Family: Valve Connectors</li>
<li>Product Sub Family: VAD</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 2+2PE</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Central Screw</li>
<li>Rated Voltage: 230 V AC/DC</li>
<li>Rated Impulse Voltage: 4.0 kV</li>
<li>Operating Voltage: 230 V AC/DC</li>
<li>Rated Current: 4 A</li>
<li>Contact Resistance: ≤ 5 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: max. 50</li>
<li>Ambient Temperature (Operation): -25°C to +80°C</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Design Standard: DIN EN 175301-803-A</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Plating: Cu/Ni, Sn</li>
<li>Contact Bearer Material: PBT</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Translucent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: Steel, Philips combi slot</li>
<li>Gasket Material: Molded Integrated Gasket</li>
</ul>
Circuitry
<ul>
<li>Function Indicator: Yellow LED</li>
<li>Protective Circuit: Varistor</li>
<li>Fastening Torque (Attachment): (50-60) Ncm</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 226</li>
<li>Conductor Size: 0.5 mm²</li>
<li>Number of Wires: 3</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li>
<li>Cycles (Bending): ˃ 5 M</li>
<li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Black</li>
<li>Cable Diameter D: ø 4.6 ± 0.2 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: ø 1.50 mm</li>
<li>Ambient Temperature (Fixed Installation): - 50 °C - + 105 °C (UL: + 80 °C)</li>
<li>Ambient Temperature (Flexible Installation): - 25 °C - + 105 °C (UL: + 80 °C)</li>
<li>UL Cable Type: AWM: 20549</li>
<li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li>
<li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: No</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
</ul>

lumberg automation 46042 vad 1a-3-3-226/15 din standard single-ended cordset: form a, 3-pin (2+2pe), grey translucent body, varistor yellow led, 230 a; pur black cable bentuk badan transparan abu-abu, dengan dan led kuning, v, kabel hitam valve connectors automasi kord berakhir tunggal: borang lutsinar kelabu, lumberg/隆堡 标准单端电线：a 型，3 (2+2pe)，灰色半透明主体，带压敏电阻和黄色 led，230 v，4 a；纯黑色电缆 隆堡自动化

lumberg-automation-46042-vad-1a-3-3-226-15-m-vad-din-standard-single-ended-cordset-form-a-3-pin-2-2pe-grey-translucent-body-with-varistor-and-yellow-led-230-v-4-a-pur-black-cable

Lumberg Automation 107804 VAD 1F-4-3-226/30 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Recovery Diode and Yellow Led, 24 V , 4 A; Pur Black Cable

<h3 class="md-block-header-three">Lumberg Automation 107804 VAD 1F-4-3-226/30 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Recovery Diode and Yellow Led, 24 V , 4 A; Pur Black Cable</h3>Cable length: 3o m <ul class="md-block-unordered-list-item"><li>Product Family: Valve Connectors</li><li>Product Sub Family: VAD</li><li>Connector Type: Cordset, single ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Angled</li><li>Number of Pins: 2+2PE</li><li>Coding: A</li><li>Shielding: Unshielded</li><li>Attachment Type: Central Screw</li><li>Rated Voltage: 24 DC</li><li>Rated Impulse Voltage: 4.0 kV</li><li>Operating Voltage: 24 V DC</li><li>Rated Current: 4 A</li><li>Contact Resistance: ≤ 5 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: max. 50</li><li>Ambient Temperature (Operation): -25°C to +80°C</li><li>Protection Degree / IP Rating: IP65, IP67</li><li>Design Standard: DIN EN 175301-803-A</li><li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul>Materials<ul class="md-block-unordered-list-item"><li>Contact Base Material: CuZn</li><li>Contact Plating: Cu/Ni, Sn</li><li>Contact Bearer Material: PBT</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Molded Body Material: TPU</li><li>Molded Body Color: Translucent</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: Steel, Philips combi slot</li><li>Gasket Material: Molded Integrated Gasket</li></ul>Circuitry<ul class="md-block-unordered-list-item"><li>Function Indicator: Yellow LED</li><li>Protective Circuit: Recovery Diode</li><li>Fastening Torque (Attachment): (50-60) Ncm</li></ul>Cable Data<ul class="md-block-unordered-list-item"><li>Cable Number: 226</li><li>Conductor Size: 0.5 mm²</li><li>Number of Wires: 3</li><li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li><li>Cycles (Bending): ˃ 5 M</li><li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Black</li><li>Cable Diameter D: ø 4.6 ± 0.2 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: ø 1.50 mm</li><li>Ambient Temperature (Fixed Installation): -50°C to +105°C (UL: +80°C)</li><li>Ambient Temperature (Flexible Installation): -25°C to +105°C (UL: +80°C)</li><li>UL Cable Type: AWM: 20549</li><li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li><li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul>Resistances<ul class="md-block-unordered-list-item"><li>Halogenfree: No</li><li>Oil Resistance: Good chemical and oil resistance</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li></ul>

<h3>Lumberg Automation 107804 VAD 1F-4-3-226/30 M Vad - Din Standard Single-Ended Cordset: Form A, 3-pin (2+2PE), Grey Translucent Body, With Recovery Diode and Yellow Led, 24 V , 4 A; Pur Black Cable</h3>
Cable length: 3o m&nbsp;
<ul>
<li>Product Family: Valve Connectors</li>
<li>Product Sub Family: VAD</li>
<li>Connector Type: Cordset, single ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Angled</li>
<li>Number of Pins: 2+2PE</li>
<li>Coding: A</li>
<li>Shielding: Unshielded</li>
<li>Attachment Type: Central Screw</li>
<li>Rated Voltage: 24 DC</li>
<li>Rated Impulse Voltage: 4.0 kV</li>
<li>Operating Voltage: 24 V DC</li>
<li>Rated Current: 4 A</li>
<li>Contact Resistance: ≤ 5 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: max. 50</li>
<li>Ambient Temperature (Operation): -25°C to +80°C</li>
<li>Protection Degree / IP Rating: IP65, IP67</li>
<li>Design Standard: DIN EN 175301-803-A</li>
<li>Pollution Degree: 3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
Materials
<ul>
<li>Contact Base Material: CuZn</li>
<li>Contact Plating: Cu/Ni, Sn</li>
<li>Contact Bearer Material: PBT</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Molded Body Material: TPU</li>
<li>Molded Body Color: Translucent</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: Steel, Philips combi slot</li>
<li>Gasket Material: Molded Integrated Gasket</li>
</ul>
Circuitry
<ul>
<li>Function Indicator: Yellow LED</li>
<li>Protective Circuit: Recovery Diode</li>
<li>Fastening Torque (Attachment): (50-60) Ncm</li>
</ul>
Cable Data
<ul>
<li>Cable Number: 226</li>
<li>Conductor Size: 0.5 mm²</li>
<li>Number of Wires: 3</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 5 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 10 x D</li>
<li>Cycles (Bending): ˃ 5 M</li>
<li>Cycles (Torsion): ˃ 5 M @ ± 360 °/1 m</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Black</li>
<li>Cable Diameter D: ø 4.6 ± 0.2 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: ø 1.50 mm</li>
<li>Ambient Temperature (Fixed Installation): -50°C to +105°C (UL: +80°C)</li>
<li>Ambient Temperature (Flexible Installation): -25°C to +105°C (UL: +80°C)</li>
<li>UL Cable Type: AWM: 20549</li>
<li>Flammability Class (Cable Jacket): DIN EN 50265-2-2, VDE 0482-265-2-2, IEC 60332-2-2, CSA FT2</li>
<li>Cable Characteristics: Good microbes and hydrolysis resistance; Mainly plasticizer diffusion free; Exclusion of PVC and silicone; Coldness flexibility; Free of lacquer wetting disturbing substances</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
Resistances
<ul>
<li>Halogenfree: No</li>
<li>Oil Resistance: Good chemical and oil resistance</li>
</ul>
Notes
<ul>
<li>Note Derating: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
</ul>

lumberg automation 107804 vad 1f-4-3-226/30 din standard single-ended cordset: form a, 3-pin (2+2pe), grey translucent body, recovery diode yellow led, 24 a; pur black cable kabel standar single-ended: bentuk badan transparan abu-abu, dengan dioda pemulihan dan led kuning, v, hitam valve connectors automasi kord berakhir tunggal: borang lutsinar kelabu, diod lumberg/隆堡 标准单端线组：a 型，3 (2+2pe)，灰色半透明主体，带恢复二极管和黄色 led，24 v，4 a；纯黑色电缆 隆堡自动化

lumberg-automation-107804-vad-1f-4-3-226-30-m-vad-din-standard-single-ended-cordset-form-a-3-pin-2-2pe-grey-translucent-body-with-recovery-diode-and-yellow-led-24-v-4-a-pur-black-cable