Omron

RS Pro

SCHNEIDER ELECTRIC

Simatherm

Electricals

electricals

Contactors

contactors

Control Relays

control-relays

Electromechanical Interface Relays

electromechanical-interface-relays

Electronics Heating & Cooling Components

electronics-heating-cooling-components

Heaters & Radiators

heaters-radiators

Impulse Relays

impulse-relays

Machinery

machinery

Induction Heaters

induction-heaters

Monitoring Relays

monitoring-relays

Industrial Automation and Control

industrial-automation-and-control

Motor Management System

motor-management-system

Power Relay

power-relay

Suppressor Module

suppressor-module

Schneider Electric A9C30812 2P - Impulse Relay Itl 

This Acti9 iTL is a modular impulse relay. This 2P device has 2 normally open contacts. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.

Rated Operational Voltage (Ue): 250 V AC 50/60 Hz

Coil Deconnection Control Signal Type: Impulse

Remote Control Type: Illuminated Push-Button 3 mA

1 cable(s) 0.5-4 mm² Rigid with Cable End

1 cable(s) 1-4 mm² Flexible with Ferrule

1 cable(s) 1.5-4 mm² Rigid with Cable End

1 cable(s) 1.5-4 mm² Flexible with Ferrule

Quality Labels: NF, CEBEC, KEMA, VDE, IMQ

IP20 Conforming to IEC 60529 (On Opening)

IP40 Conforming to IEC 60529 (In Enclosure)

<h3 class="md-block-header-three">Schneider Electric A9C30812 2P - Impulse Relay Itl </h3>This Acti9 iTL is a modular impulse relay. This 2P device has 2 normally open contacts. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.Specifications: <ul class="md-block-unordered-list-item"><li>Product Range: Acti9</li><li>Product Name: Acti9 iTL</li><li>Product Type: Impulse Relay</li><li>Short Name: iTL</li><li>Application: Standard</li><li>Poles: 2P</li><li>Pole Contact Composition: 2 NO</li><li>Rated Current: 16 A</li><li>Network Type: AC</li><li>Control Circuit Voltage (Uc):</li><ul class="md-block-unordered-list-item"><li>230-240 V AC 50/60 Hz</li><li>110 V DC</li></ul><li>Complementary Features:</li><ul class="md-block-unordered-list-item"><li>Network Frequency: 50/60 Hz</li><li>Rated Operational Voltage (Ue): 250 V AC 50/60 Hz</li><li>Control Type: Remote and Manual</li><li>Coil Deconnection Control Signal Type: Impulse</li><li>Switching Frequency:</li><ul class="md-block-unordered-list-item"><li>5 Switching Operations/Minute</li><li>100 Switching Operations/Day</li></ul><li>Impulse Duration: 50 ms to 1 s</li><li>Remote Control Type: Illuminated Push-Button 3 mA</li><li>Local Signalling: ON/OFF Indication</li><li>Mounting Mode: Fixed</li><li>Mounting Support: DIN Rail</li><li>9 mm Pitches: 2</li><li>Dimensions:</li><ul class="md-block-unordered-list-item"><li>Height: 84 mm</li><li>Width: 18 mm</li><li>Depth: 60 mm</li></ul><li>Electrical Durability:</li><ul class="md-block-unordered-list-item"><li>AC-21: 200,000 Cycles</li><li>AC-22: 100,000 Cycles</li></ul></ul><li>Connections - Terminals:</li><ul class="md-block-unordered-list-item"><li>Control Circuit: Tunnel Type Terminals</li><ul class="md-block-unordered-list-item"><li>1 cable(s) 0.5-4 mm² Rigid</li><li>1 cable(s) 0.5-4 mm² Rigid with Cable End</li><li>1 cable(s) 1-4 mm² Flexible</li><li>1 cable(s) 1-4 mm² Flexible with Ferrule</li></ul><li>Power Circuit: Tunnel Type Terminals</li><ul class="md-block-unordered-list-item"><li>1 cable(s) 1.5-4 mm² Rigid</li><li>1 cable(s) 1.5-4 mm² Rigid with Cable End</li><li>1 cable(s) 1.5-4 mm² Flexible</li><li>1 cable(s) 1.5-4 mm² Flexible with Ferrule</li></ul><li>Wire Stripping Length: 11 mm</li><li>Tightening Torque: 1 N.m</li></ul><li>Range Compatibility:</li><ul class="md-block-unordered-list-item"><li>Acti 9 iATEt</li><li>Acti 9 iATL4</li><li>Acti 9 iATLc</li><li>Acti 9 iATLc+s</li><li>Acti 9 iATLm</li><li>Acti 9 iATLs</li><li>Acti 9 iATLz</li><li>Acti 9 iETL iTL 16</li><li>Acti 9 iATLc+c</li><li>Acti 9 iATL24</li></ul><li>Environment:</li><ul class="md-block-unordered-list-item"><li>Standards: EN 669-1, EN 669-2-2</li><li>Product Certifications: GOST</li><li>Quality Labels: NF, CEBEC, KEMA, VDE, IMQ</li><li>Noise Level: 60 dB</li><li>IP Degree of Protection:</li><ul class="md-block-unordered-list-item"><li>IP20 Conforming to IEC 60529 (On Opening)</li><li>IP40 Conforming to IEC 60529 (In Enclosure)</li></ul><li>Pollution Degree: 3</li><li>Tropicalisation: 2</li><li>Relative Humidity: 95% at 55°C</li><li>Ambient Air Temperature:</li><ul class="md-block-unordered-list-item"><li>For Operation: -20…50°C</li><li>For Storage: -40…70°C </li></ul></ul></ul>

<h3>Schneider Electric A9C30812 2P - Impulse Relay Itl&nbsp;</h3>
This Acti9 iTL is a modular impulse relay. This 2P device has 2 normally open contacts. Rated current is 16A, 24VAC to 250VAC operating voltage and it operates with 230VAC to 240VAC or 110VDC control voltage. Electrical endurance goes up to 200000 cycles for AC-21 or 100000 cycles for AC-22. The switching frequency is 5 switching operations/minute or 100 switching operations/day. The duration of the command order should be between 50ms to 1s. It is mainly used for lighting control applications. The Ui rated insulation voltage is 440VAC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Pollution degree is 3. Overvoltage category is IV. The dimensions are (W) 18mm x (H) 84mm x (D) 60mm. The degree of protection is IP20 and IP40 in an enclosure. The operating temperature is from -20°C to 50°C. The storage temperature is from -40°C to 70°C. This product is compliant with IEC/EN 60669-1 and IEC/EN 60669-2-2 standard.
Specifications:&nbsp;
<ul>
<li>Product Range: Acti9</li>
<li>Product Name: Acti9 iTL</li>
<li>Product Type: Impulse Relay</li>
<li>Short Name: iTL</li>
<li>Application: Standard</li>
<li>Poles: 2P</li>
<li>Pole Contact Composition: 2 NO</li>
<li>Rated Current: 16 A</li>
<li>Network Type: AC</li>
<li>Control Circuit Voltage (Uc):</li>
<ul>
<li>230-240 V AC 50/60 Hz</li>
<li>110 V DC</li>
</ul>
<li>Complementary Features:</li>
<ul>
<li>Network Frequency: 50/60 Hz</li>
<li>Rated Operational Voltage (Ue): 250 V AC 50/60 Hz</li>
<li>Control Type: Remote and Manual</li>
<li>Coil Deconnection Control Signal Type: Impulse</li>
<li>Switching Frequency:</li>
<ul>
<li>5 Switching Operations/Minute</li>
<li>100 Switching Operations/Day</li>
</ul>
<li>Impulse Duration: 50 ms to 1 s</li>
<li>Remote Control Type: Illuminated Push-Button 3 mA</li>
<li>Local Signalling: ON/OFF Indication</li>
<li>Mounting Mode: Fixed</li>
<li>Mounting Support: DIN Rail</li>
<li>9 mm Pitches: 2</li>
<li>Dimensions:</li>
<ul>
<li>Height: 84 mm</li>
<li>Width: 18 mm</li>
<li>Depth: 60 mm</li>
</ul>
<li>Electrical Durability:</li>
<ul>
<li>AC-21: 200,000 Cycles</li>
<li>AC-22: 100,000 Cycles</li>
</ul>
</ul>
<li>Connections - Terminals:</li>
<ul>
<li>Control Circuit: Tunnel Type Terminals</li>
<ul>
<li>1 cable(s) 0.5-4 mm² Rigid</li>
<li>1 cable(s) 0.5-4 mm² Rigid with Cable End</li>
<li>1 cable(s) 1-4 mm² Flexible</li>
<li>1 cable(s) 1-4 mm² Flexible with Ferrule</li>
</ul>
<li>Power Circuit: Tunnel Type Terminals</li>
<ul>
<li>1 cable(s) 1.5-4 mm² Rigid</li>
<li>1 cable(s) 1.5-4 mm² Rigid with Cable End</li>
<li>1 cable(s) 1.5-4 mm² Flexible</li>
<li>1 cable(s) 1.5-4 mm² Flexible with Ferrule</li>
</ul>
<li>Wire Stripping Length: 11 mm</li>
<li>Tightening Torque: 1 N.m</li>
</ul>
<li>Range Compatibility:</li>
<ul>
<li>Acti 9 iATEt</li>
<li>Acti 9 iATL4</li>
<li>Acti 9 iATLc</li>
<li>Acti 9 iATLc+s</li>
<li>Acti 9 iATLm</li>
<li>Acti 9 iATLs</li>
<li>Acti 9 iATLz</li>
<li>Acti 9 iETL iTL 16</li>
<li>Acti 9 iATLc+c</li>
<li>Acti 9 iATL24</li>
</ul>
<li>Environment:</li>
<ul>
<li>Standards: EN 669-1, EN 669-2-2</li>
<li>Product Certifications: GOST</li>
<li>Quality Labels: NF, CEBEC, KEMA, VDE, IMQ</li>
<li>Noise Level: 60 dB</li>
<li>IP Degree of Protection:</li>
<ul>
<li>IP20 Conforming to IEC 60529 (On Opening)</li>
<li>IP40 Conforming to IEC 60529 (In Enclosure)</li>
</ul>
<li>Pollution Degree: 3</li>
<li>Tropicalisation: 2</li>
<li>Relative Humidity: 95% at 55°C</li>
<li>Ambient Air Temperature:</li>
<ul>
<li>For Operation: -20…50°C</li>
<li>For Storage: -40…70°C 
&nbsp;</li>
</ul>
</ul>
</ul>

Product Datasheet

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Telemecanique

Pilot Lights

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Button Switch

Standby battery 

Overload Relays

Schneider

buyerIntroduction

Schneider Electric A9C30812 2P - Impulse Relay Itl

schneider electric a9c30812 2p impulse relay itl relai impuls relays geganti electric/施耐德电气 脉冲继电器 施耐德电气

schneider-electric-a9c30812-2p-impulse-relay-itl

simatherm Induction Heater IH 045
Heat the most common rolling bearings up to 45 kg

World's first controllable induction heater with an app
The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required.

· Connectivity with the "simatec World of Maintenance" app
· Remote control
· For rolling bearings weighing up to 45 kg
· For workpieces with an inner diameter of 20 to 310 mm
· Available for voltages of 100, 115 and 230 V
· 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy
· Extendable bearing support arms
· Smallest and fastest device in its performance class
· Smallest external induction coil
· Supplied with three yokes as standard
· Particularly compact design - including the yokes only 17 kg in weight
· 3 year manufacturer warranty
· Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· Automatic demagnetization

Technical data for simatherm IH 045
Designation: Heater for the most common rolling bearings
Voltage V / Hz / power:
- 100 V / 50 – 60 Hz / 1.5 kVA
- 110 – 120 V / 50 – 60 Hz / 1.7 kVA
- 220 – 240 V / 50 – 60 Hz / 2.1 kVA
Workpiece Maximum weight: 45kg
Bore diameter: From 20 mm inner diameter to 310 mm outer diameter
Temperature control:
- Range: 20 – 180°C
- Magnetic probe: Type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 180 °C
Thermometer mode: yes
Two-sensor technology: yes
Bearing temperature mode: yes
Power level: 8 levels / 10-20-30-40-50-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Suitability for precision bearings: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard wtih LED-display or remote control via app
Size of the operating area (WxH): 114 x 160 mm
Coil diameter: 89 mm
Measurements (LxWxH): 320 x 267 x 293 mm
Overall weight including yokes: 17 kg
Number of standard yokes: 3
Standard yokes:
- 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm
- 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm
- 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 42.5 x 42.5 mm
Yoke storage: yes, integrated
Housing material: plastic
Error guide codes: yes; error messages in text form visible in the app

Scope of delivery
· 1x simatherm IH 045
· 1x Quick instruction guide
· 1x Temperature probe
· 1x Protective gloves
· 1x Power cord
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm
· 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm

Optional:
· Second temperature probe needed to use two-sensor technology

Industry target groups and applications

Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH 045
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

*Lead time: 3 to 4 weeks upon order confirmation

remote control via "world of maintanenace" app

simatherm Induction Heater IH 045 Heat the most common rolling bearings up to 45 kg World&#x27;s first controllable induction heater with an app The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. · Connectivity with the &quot;simatec World of Maintenance&quot; app · Remote control · For rolling bearings weighing up to 45 kg · For workpieces with an inner diameter of 20 to 310 mm · Available for voltages of 100, 115 and 230 V · 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy · Extendable bearing support arms · Smallest and fastest device in its performance class · Smallest external induction coil · Supplied with three yokes as standard · Particularly compact design - including the yokes only 17 kg in weight · 3 year manufacturer warranty · Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · Automatic demagnetization Technical data for simatherm IH 045 Designation: Heater for the most common rolling bearings Voltage V / Hz / power: - 100 V / 50 – 60 Hz / 1.5 kVA - 110 – 120 V / 50 – 60 Hz / 1.7 kVA - 220 – 240 V / 50 – 60 Hz / 2.1 kVA Workpiece Maximum weight: 45kg Bore diameter: From 20 mm inner diameter to 310 mm outer diameter Temperature control: - Range: 20 – 180°C - Magnetic probe: Type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 180 °C Thermometer mode: yes Two-sensor technology: yes Bearing temperature mode: yes Power level: 8 levels / 10-20-30-40-50-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Suitability for precision bearings: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard wtih LED-display or remote control via app Size of the operating area (WxH): 114 x 160 mm Coil diameter: 89 mm Measurements (LxWxH): 320 x 267 x 293 mm Overall weight including yokes: 17 kg Number of standard yokes: 3 Standard yokes: - 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm - 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 42.5 x 42.5 mm Yoke storage: yes, integrated Housing material: plastic Error guide codes: yes; error messages in text form visible in the app Scope of delivery · 1x simatherm IH 045 · 1x Quick instruction guide · 1x Temperature probe · 1x Protective gloves · 1x Power cord · 1x Yoke 14x14 for bearings with a bore diameter from 20 mm · 1x Yoke 28x28 for bearings with a bore diameter from 40 mm · 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm Optional: · Second temperature probe needed to use two-sensor technology Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH 045 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/Dvvje7J4uiAlXV1cxs9W1m.jpg" alt="remote control via "world of maintanenace" app" /><figcaption class="md-block-image-caption">remote control via &quot;world of maintanenace&quot; app</figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Y8nTQWUbh2CHAPfZUy10t4.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/8ahOmpNppatDGixSwvwT_N.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 045 
Heat the most common rolling bearings up to 45 kg 
 
World's first controllable induction heater with an app 
The IH 045 is suitable for heating small and medium-sized workpieces up to 45 kg. Due to the external induction coil, the unit works extremely efficiently. The power can be adjusted in eight stages if required. 
 
· Connectivity with the "simatec World of Maintenance" app 
· Remote control 
· For rolling bearings weighing up to 45 kg 
· For workpieces with an inner diameter of 20 to 310 mm 
· Available for voltages of 100, 115 and 230 V 
· 8-stage power consumption combined with smaller yokes, allows smaller bearings to be heated safely and quickly with less energy 
· Extendable bearing support arms 
· Smallest and fastest device in its performance class 
· Smallest external induction coil 
· Supplied with three yokes as standard 
· Particularly compact design - including the yokes only 17 kg in weight 
· 3 year manufacturer warranty 
· Can heat a 28 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· Automatic demagnetization 
 
<ins>Technical data for simatherm IH 045</ins> 
Designation: Heater for the most common rolling bearings 
Voltage V / Hz / power: 
- 100 V / 50 – 60 Hz / 1.5 kVA 
- 110 – 120 V / 50 – 60 Hz / 1.7 kVA 
- 220 – 240 V / 50 – 60 Hz / 2.1 kVA 
Workpiece Maximum weight: 45kg 
Bore diameter: From 20 mm inner diameter to 310 mm outer diameter 
Temperature control: 
- Range: 20 – 180°C 
- Magnetic probe: Type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 180 °C 
Thermometer mode: yes 
Two-sensor technology: yes 
Bearing temperature mode: yes 
Power level: 8 levels / 10-20-30-40-50-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Suitability for precision bearings: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard wtih LED-display or remote control via app 
Size of the operating area (WxH): 114 x 160 mm 
Coil diameter: 89 mm 
Measurements (LxWxH): 320 x 267 x 293 mm 
Overall weight including yokes: 17 kg 
Number of standard yokes: 3 
Standard yokes: 
- 42.5 x 42.5 x 219 mm for bearings with a bore diameter of at least 60 mm 
- 28 x 28 x 219 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 219 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 42.5 x 42.5 mm 
Yoke storage: yes, integrated 
Housing material: plastic 
Error guide codes: yes; error messages in text form visible in the app 
 
Scope of delivery 
· 1x simatherm IH 045 
· 1x Quick instruction guide 
· 1x Temperature probe 
· 1x Protective gloves 
· 1x Power cord 
· 1x Yoke 14x14 for bearings with a bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with a bore diameter from 40 mm 
· 1x Yoke 42.5x42.5 for bearings with a bore diameter from 60 mm 
 
Optional: 
· Second temperature probe needed to use two-sensor technology 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH 045</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:3i1pj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Dvvje7J4uiAlXV1cxs9W1m.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="3i1pj" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:5vtg4"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Y8nTQWUbh2CHAPfZUy10t4.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5vtg4" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:c57dp"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/8ahOmpNppatDGixSwvwT_N.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="c57dp" 
 layout="nodisplay"></amp-image-lightbox>

Technical Data

simatherm & simatool product catalog

Silver

Simalube

Lubricants

Silver 

Simatherm Bearing Induction Heater Ih 045 With Remote App Control (up to 45kg)

simatherm bearing induction heater ih 045 remote app control (up 45kg) pemanas induksi bantalan dengan kontrol aplikasi jarak jauh (hingga heaters aruhan kawalan (sehingga simatherm/西马瑟姆 轴承感应加热器 带远程应用程序控制（最多 45 公斤） 西马瑟姆

simatherm-bearing-induction-heater-ih-045-with-remote-app-control-up-to-45kg

Lead-use eliminated, safe for environment.

With different colors for AC and DC coil tapes, AC and DC specifications are easily identified.

Type MY(S) with a convenient latching lever for circuit check is now also available.

Wiring labor-hours can be shortened by 60% if combined with push-in plus socket Type PYF--PU (according to the manufacturer's measured data).

Terminal Shape: Socket / plug-in terminal, PCB terminal.

Contact rated current (minimum value for AC and DC)(A): 5

<h3 class="md-block-header-three">Omron MY2 Relay Power 100/110VAC 2P</h3>Features<ul class="md-block-unordered-list-item"><li>Lead-use eliminated, safe for environment.</li><li>With different colors for AC and DC coil tapes, AC and DC specifications are easily identified.</li><li>Type MY(S) with a convenient latching lever for circuit check is now also available.</li><li>Wiring labor-hours can be shortened by 60% if combined with push-in plus socket Type PYF--PU (according to the manufacturer&#x27;s measured data).</li><li>Terminal Shape: Socket / plug-in terminal, PCB terminal.</li></ul>Specifications<ul class="md-block-unordered-list-item"><li>Contact Configuration: 2c</li><li>Latch function: NA </li><li>Terminal shape: Socket / plug-in</li><li>Contact rated current (minimum value for AC and DC)(A): 5</li><li>Coil rated voltage (DC)(V): -</li><li>Coil rated voltage (AC)(V): 100/110 </li><li>UOM: PCS</li><li>Dimension height (mm): 36</li><li>Dimension width (mm): 21.5 </li><li>Dimension depth (mm): 28</li><li>Unit Weight: 35 g</li></ul>

<h3>Omron MY2 Relay Power 100/110VAC 2P</h3>
Features
<ul>
<li>Lead-use eliminated, safe for environment.</li>
<li>With different colors for AC and DC coil tapes, AC and DC specifications are easily identified.</li>
<li>Type MY(S) with a convenient latching lever for circuit check is now also available.</li>
<li>Wiring labor-hours can be shortened by 60% if combined with push-in plus socket Type PYF--PU (according to the manufacturer's measured data).</li>
<li>Terminal Shape: Socket / plug-in terminal, PCB terminal.</li>
</ul>
Specifications
<ul>
<li>Contact Configuration: 2c</li>
<li>Latch function: NA&nbsp;</li>
<li>Terminal shape: Socket / plug-in</li>
<li>Contact rated current (minimum value for AC and DC)(A): 5</li>
<li>Coil rated voltage (DC)(V): -</li>
<li>Coil rated voltage (AC)(V): 100/110&nbsp;</li>
<li>UOM: PCS</li>
<li>Dimension height (mm): 36</li>
<li>Dimension width (mm): 21.5&nbsp;</li>
<li>Dimension depth (mm): 28</li>
<li>Unit Weight: 35 g</li>
</ul>

Jimmy Foo

Philips

BRADY

Panduit

Hawke

FUJI

Pelican

Circuit Breaker

Other Electrical Accessories

Power Adapter

Cable Ties

Plugs & Connector 

Other Electrical Switches

Fuses & Fusegear

Light Bulbs

Doreen Tan

Omron MY2 Relay Power 100/110VAC 2P

omron my2 relay power 100/110vac 2p daya relai kuasa geganti omron/欧姆龙 继电器电源 功率继电器 欧姆龙

omron-my2-relay-power-100-110vac-2p

 Single stable, Single, Plug-in terminal, Operating indicator LED, Not equipped, 24 VDC 5 A, 220 VAC 5 A, Output DPDT (24 VDC 5 A) 

Reduces wiring work by 60% when combined with theÂ PYF-PU Push-In Plug Socket.

Relays with AC and DC coils have different colors ofÂ operating indicators (LEDs).

Printing on the coil tape indicates the operating coilÂ specification

Mechanical operation indicators are a standard featureÂ on all model.

Contact structure: Single
Contact Resistance : 50 mQmax.
Operation Time : 20 ms max.
Insulation Resistance : 100 MQ min.
Shock Resistance : 1,000 m/s 2
Endurance : 50,000,000 operations min. (operating frequency: 18,000 operations/h) 

Single stable, Single, Plug-in terminal, Operating indicator LED, Not equipped, 24 VDC 5 A, 220 VAC 5 A, Output DPDT (24 VDC 5 A) Reduces wiring work by 60% when combined with theÂ PYF-PU Push-In Plug Socket.Relays with AC and DC coils have different colors ofÂ operating indicators (LEDs).Printing on the coil tape indicates the operating coilÂ specificationMechanical operation indicators are a standard featureÂ on all model.RoHS complaint.Contact structure: Single Contact Resistance : 50 mQmax. Operation Time : 20 ms max. Insulation Resistance : 100 MQ min. Shock Resistance : 1,000 m/s 2 Endurance : 50,000,000 operations min. (operating frequency: 18,000 operations/h)

&nbsp;Single stable, Single, Plug-in terminal, Operating indicator LED, Not equipped, 24 VDC 5 A, 220 VAC 5 A, Output DPDT (24 VDC 5 A)&nbsp;
Reduces wiring work by 60% when combined with theÂ PYF-PU Push-In Plug Socket.
Relays with AC and DC coils have different colors ofÂ operating indicators (LEDs).
Printing on the coil tape indicates the operating coilÂ specification
Mechanical operation indicators are a standard featureÂ on all model.
RoHS complaint.
Contact structure: Single 
Contact Resistance : 50 mQmax. 
Operation Time : 20 ms max. 
Insulation Resistance : 100 MQ min. 
Shock Resistance : 1,000 m/s 2 
Endurance : 50,000,000 operations min. (operating frequency: 18,000 operations/h)&nbsp;

Thomas & Betts

Bussmann

Weidmuller

Crouse-Hinds

Led Lights

Junction & Enclosure Box

Light Tubes

Omron MY2N-GS Relay Power AC100/110 2P Omz

omron my2n-gs relay power ac100/110 2p omz relai daya omron/欧姆龙 继电器电源 功率继电器 欧姆龙

omron-my2n-gs-relay-power-ac100-110-2p-omz

simatherm Induction Heater IH 210 with FAN, 400-460V/50-60Hz
Heat large rolling bearings up to 300 kg

The most powerful table-top heater
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Special version with ventilation or larger working area area possible on request
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 3 year manufacturer warranty

 
Technical data for simather IH 210
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / < 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: yes
Sliding yoke: yes 
Housing material: aluminum 

Scope of delivery
· 1x simatherm IH 210
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm

Optional:
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm


Industry target groups and applications
 
Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 210 with FAN, 400-460V/50-60Hz Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.· For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Special version with ventilation or larger working area area possible on request · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: yes Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the IH 210 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/HcKUBeE6PWglncaCMC5OBh.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/E_b7Ko0hkR~v5jcwlDGHhX.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 210 with FAN, 400-460V/50-60Hz 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Special version with ventilation or larger working area area possible on request 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simather IH 210</ins> 
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: yes 
Sliding yoke: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 
 
Optional: 
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the IH 210</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:eq7aj"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/HcKUBeE6PWglncaCMC5OBh.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="eq7aj" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:c5nni"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/E_b7Ko0hkR~v5jcwlDGHhX.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="c5nni" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Induction Heater Ih 210 With Fan (400-460V, up O 300kg)

simatherm induction heater ih 210 fan (400-460v, 300kg) pemanas induksi dengan kipas angin hingga heaters aruhan naik simatherm/西马瑟姆 感应加热器 带风扇（400-460v，重 300kg） 西马瑟姆

simatherm-induction-heater-ih-210-with-fan-400-460v-up-o-300kg

simatherm Bearing BInduction Heater IH 210, 400-460V
Heat large rolling bearings up to 300 kg

The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. 

· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 

Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / < 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum

Scope of delivery 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 

Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 

 Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the IH 210
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Bearing BInduction Heater IH 210, 400-460V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. · For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the IH 210 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation<figure class="md-block-image md-block-image-has-caption"><img src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg" alt="
 " /><figcaption class="md-block-image-caption"> </figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 400-460V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing.&nbsp;
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty&nbsp;
<ins>Technical data for simather IH 210</ins>&nbsp;
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum&nbsp;
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm&nbsp;
Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm&nbsp;
Industry target groups and applications&nbsp;
&nbsp;<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the IH 210</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation

 <div class="img-ctnr">
 <amp-img 
 on="tap:74sn7"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/s1kybNXRhBctdkyZtOjuEV.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="74sn7" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:9k098"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/JyODLzjFEAaaQ1E35iMtnL.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="9k098" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 210 (400-460V, up to 300kg)

simatherm bearing induction heater ih 210 (400-460v, 300kg) pemanas induksi bantalan hingga heaters aruhan galas sehingga simatherm/西马瑟姆 轴承感应加热器 210（400-460v，最高 300kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-210-400-460v-up-to-300kg

simatherm Bearing BInduction Heater IH 210, 200-230V 
Heat large rolling bearings up to 300 kg

· For rolling bearings weighing up to 300 kg
· Extremely simple operation thanks to the sliding yoke
· Available for voltages of 200, 400–480 and 500–575 V
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Particularly compact design - including the yokes only 75 kg in weight
· Automatic demagnetization
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· For workpieces with an inner diameter of 60 to 640 mm
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 3 year manufacturer warranty

 
Technical data for simather IH 210
Designation: Heater for large workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 10.0 kVA
- 440–480 V / 50–60 Hz / 11.5 kVA
- 575 V / 60 Hz / 10.4 kVA
Workpiece:
- Maximum weight: 300 kg
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter
Temperature control: 
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
- Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal magnetic flux: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 250 x 250 mm
Coil diameter: 135 mm
Measurements (LxWxH): 600 x 350 x 420 mm
Overall weight including yokes: 75 kg
Number of standard yokes: 2
Standard yokes:
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm
Core cross-section: 70 x 70 mm
Yoke storage: yes, integrated
Cooling fan: optional
Sliding yoke: yes
Housing material: aluminum
 
Scope of delivery
· 1x simatherm IH 210
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm

Optional:
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm

Industry target groups and applications
 
Fabrication and assembly
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

 General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment/lifting devices
 
Typical components which can be heated with the VOLCANO
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

 Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Bearing BInduction Heater IH 210, 200-230V Heat large rolling bearings up to 300 kgThe most powerful table-top heater The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.· For rolling bearings weighing up to 300 kg · Extremely simple operation thanks to the sliding yoke · Available for voltages of 200, 400–480 and 500–575 V · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Particularly compact design - including the yokes only 75 kg in weight · Automatic demagnetization · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · For workpieces with an inner diameter of 60 to 640 mm · Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 3 year manufacturer warranty Technical data for simather IH 210 Designation: Heater for large workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 10.0 kVA - 440–480 V / 50–60 Hz / 11.5 kVA - 575 V / 60 Hz / 10.4 kVA Workpiece: - Maximum weight: 300 kg - Bore diameter: From 60 mm inner diameter to 640 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal magnetic flux: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 250 x 250 mm Coil diameter: 135 mm Measurements (LxWxH): 600 x 350 x 420 mm Overall weight including yokes: 75 kg Number of standard yokes: 2 Standard yokes: - 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm - 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm Core cross-section: 70 x 70 mm Yoke storage: yes, integrated Cooling fan: optional Sliding yoke: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 210 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm · 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm Optional: · Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment/lifting devices Typical components which can be heated with the VOLCANO · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/XBuTetHObwZeIg4hHSkoMc.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Ej7SyR_Gybyklxz349lyxK.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Bearing BInduction Heater IH 210, 200-230V 
Heat large rolling bearings up to 300 kg
The most powerful table-top heater 
The IH 210 is suitable for heating large workpieces and rolling bearings weighing up to 300 kg. The IH 210 is supplied with two yokes as standard. The sliding yoke allows easy loading and unloading of the bearing. As a special version, the IH 210 is equipped with fan cooling (IH 210F) for continuous operation.
· For rolling bearings weighing up to 300 kg 
· Extremely simple operation thanks to the sliding yoke 
· Available for voltages of 200, 400–480 and 500–575 V 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Particularly compact design - including the yokes only 75 kg in weight 
· Automatic demagnetization 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· For workpieces with an inner diameter of 60 to 640 mm 
· Can heat a 210 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 3 year manufacturer warranty 
 
 
<ins>Technical data for simather IH 210</ins> 
Designation: Heater for large workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 10.0 kVA 
- 440–480 V / 50–60 Hz / 11.5 kVA 
- 575 V / 60 Hz / 10.4 kVA 
Workpiece: 
- Maximum weight: 300 kg 
- Bore diameter: From 60 mm inner diameter to 640 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
- Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal magnetic flux: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 250 x 250 mm 
Coil diameter: 135 mm 
Measurements (LxWxH): 600 x 350 x 420 mm 
Overall weight including yokes: 75 kg 
Number of standard yokes: 2 
Standard yokes: 
- 70 x 70 x 420 mm for bearings with a bore diameter of at least 100 mm 
- 40 x 40 x 420 mm for bearings with a bore diameter of at least 60 mm 
Core cross-section: 70 x 70 mm 
Yoke storage: yes, integrated 
Cooling fan: optional 
Sliding yoke: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 210 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Sliding yoke 70 x 70 for bearings with bore diameter from 100 mm 
· 1x Yoke 40 x 40 for bearings with bore diameter from 60 mm 
 
Optional: 
· Yokes (14 x14 mm, 20 x 20 mm, 28 x 28 mm, 40 x 40 mm, 55 x 55 mm 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
 <ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment/lifting devices 
 
<ins>Typical components which can be heated with the VOLCANO</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
 <ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:l51i"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/XBuTetHObwZeIg4hHSkoMc.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="l51i" 
 layout="nodisplay"></amp-image-lightbox>

 

 <div class="img-ctnr">
 <amp-img 
 on="tap:4tp35"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Ej7SyR_Gybyklxz349lyxK.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="4tp35" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 210 (200-230V, up to 300kg)

simatherm bearing induction heater ih 210 (200-230v, 300kg) pemanas induksi bantalan hingga heaters radiators aruhan galas sehingga simatherm/西马瑟姆 轴承感应加热器 210（200-230v，最高 300kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-210-200-230v-up-to-300kg

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan
Heat smaller to medium-sized rolling bearings up to 150 kg

The compact heater for serial production
The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation.

· For rolling bearings weighing up to 150 kg
· For workpieces with an inner diameter of 20 to 400 mm
· Fan cooling for continuous operation
· Particularly compact design - including the yokes weighing only 38 kg
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption
· Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy
· Automatic demagnetization
· Supplied with three yokes as standard
· Swivel arm including yoke adapter so that swivel arm can also be used with small yokes
· 3 year manufacturer warranty

Technical data for simatherm IH 090
Designation: Heater with cooling fan for continuous operation with small to medium workpieces
Voltage V / Hz / power:
- 400 V / 50 Hz / 6.4 kVA
- 440 – 480 V / 50–60 Hz / 7.4 kVA
- 575 V / 60 Hz / 9.2 kVA
Workpiece Maximum weight: 150kg
Bore diameter: From 20 mm inner diameter to 400 mm outer diameter
Temperature control:
- Range: 0 – 250°C
- Magnetic probe: yes, type K
- Accuracy (electronic): ± 3°C
Time control:
- Range: 0 – 60 minutes
 - Accuracy: ± 0.01 seconds
Maximum temperature (approx.): 250°C
Thermometer mode: yes
Bearing temperature mode: yes
Power level: 5 levels / 20-40-60-80-100%
Automatic demagnetization / residual magnetism: yes / < 2A/cm
Suitable for heating sealed bearings: yes
Suitable for heating pre-greased bearings: yes
Error guide codes: yes
Thermal overload protection: yes
Maximum magnetic flux: 1.5 T
Control panel: Keyboard with LED-display
Size of the operating area (WxH): 145 x 205 mm
Coil diameter: 115 mm
Measurements (LxWxH): 420 x 280 x 420 mm
Overall weight including yokes: 38 kg
Number of standard yokes: 3
Standard yokes:
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm
Core cross-section: 55 x 55 mm
Yoke storage: yes, integrated
Cooling fan: standard
Swivel arm: yes
Housing material: aluminum

Scope of delivery
· 1x simatherm IH 090
· 1x User manual
· 1x Temperature probe
· 1x Power cord
· 1x Protective gloves
· 1x Swivel arm
· 1x Yoke adapter
· 1x Yoke 14x14 for bearings with bore diameter from 20 mm
· 1x Yoke 28x28 for bearings with bore diameter from 40 mm
· 1x Yoke 55x55 for bearings with bore diameter from 78 mm
Optional:
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm)


Industry target groups and applications
 
Fabrication and assembly 
· General mechanical engineering
· Gearbox construction (vehicles and industry)
· Pumps
· Hydraulic equipment
· Electric motor construction
· Conveyor and conveying systems

General operations maintenance
· Metal processing industry
· Paper and cardboard factories
· Textile industry
· Larger printing plants
· Food industry
· Building services
· Vehicles (buses, trucks, rail vehicles)
· Construction machinery
· Forklifts, storage equipment / lifting devices

Typical components which can be heated with the IH090 
· Rolling bearings
· Gears
· Gear rims
· Shrink rings
· Pistons
· Bushings
· Sleeves
· Clutch parts

Materials which can be heated well
· Structural steel
· Ball bearing steel
· Grey cast iron
· Cast steel

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan Heat smaller to medium-sized rolling bearings up to 150 kg The compact heater for serial production The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. · For rolling bearings weighing up to 150 kg · For workpieces with an inner diameter of 20 to 400 mm · Fan cooling for continuous operation · Particularly compact design - including the yokes weighing only 38 kg · Induction coil outside of the housing, shortens the heating times and reduces energy consumption · Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy · 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy · Automatic demagnetization · Supplied with three yokes as standard · Swivel arm including yoke adapter so that swivel arm can also be used with small yokes · 3 year manufacturer warranty Technical data for simatherm IH 090 Designation: Heater with cooling fan for continuous operation with small to medium workpieces Voltage V / Hz / power: - 400 V / 50 Hz / 6.4 kVA - 440 – 480 V / 50–60 Hz / 7.4 kVA - 575 V / 60 Hz / 9.2 kVA Workpiece Maximum weight: 150kg Bore diameter: From 20 mm inner diameter to 400 mm outer diameter Temperature control: - Range: 0 – 250°C - Magnetic probe: yes, type K - Accuracy (electronic): ± 3°C Time control: - Range: 0 – 60 minutes - Accuracy: ± 0.01 seconds Maximum temperature (approx.): 250°C Thermometer mode: yes Bearing temperature mode: yes Power level: 5 levels / 20-40-60-80-100% Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm Suitable for heating sealed bearings: yes Suitable for heating pre-greased bearings: yes Error guide codes: yes Thermal overload protection: yes Maximum magnetic flux: 1.5 T Control panel: Keyboard with LED-display Size of the operating area (WxH): 145 x 205 mm Coil diameter: 115 mm Measurements (LxWxH): 420 x 280 x 420 mm Overall weight including yokes: 38 kg Number of standard yokes: 3 Standard yokes: - 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm - 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm - 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm Core cross-section: 55 x 55 mm Yoke storage: yes, integrated Cooling fan: standard Swivel arm: yes Housing material: aluminum Scope of delivery · 1x simatherm IH 090 · 1x User manual · 1x Temperature probe · 1x Power cord · 1x Protective gloves · 1x Swivel arm · 1x Yoke adapter · 1x Yoke 14x14 for bearings with bore diameter from 20 mm · 1x Yoke 28x28 for bearings with bore diameter from 40 mm · 1x Yoke 55x55 for bearings with bore diameter from 78 mm Optional: · Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) Industry target groups and applications Fabrication and assembly · General mechanical engineering · Gearbox construction (vehicles and industry) · Pumps · Hydraulic equipment · Electric motor construction · Conveyor and conveying systems General operations maintenance · Metal processing industry · Paper and cardboard factories · Textile industry · Larger printing plants · Food industry · Building services · Vehicles (buses, trucks, rail vehicles) · Construction machinery · Forklifts, storage equipment / lifting devices Typical components which can be heated with the IH090 · Rolling bearings · Gears · Gear rims · Shrink rings · Pistons · Bushings · Sleeves · Clutch parts Materials which can be heated well · Structural steel · Ball bearing steel · Grey cast iron · Cast steel*Lead time: 3 to 4 weeks upon order confirmation <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/BgvSA_6g~zSPhZMt2cO6sA.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

simatherm Induction Heater IH 090, 400-460V/50-60Hz; with fan 
Heat smaller to medium-sized rolling bearings up to 150 kg 
 
The compact heater for serial production 
The IH 090 induction heater is suitable for heating medium to large workpieces weighing up to 150 kg. As standard, the IH 090 has a swivel arm and three yokes. Thanks to its integrated air cooling system, the IH 090 is suitable for series assembly and continuous operation. 
 
· For rolling bearings weighing up to 150 kg 
· For workpieces with an inner diameter of 20 to 400 mm 
· Fan cooling for continuous operation 
· Particularly compact design - including the yokes weighing only 38 kg 
· Induction coil outside of the housing, shortens the heating times and reduces energy consumption 
· Can heat a 90 kg bearing from 20 °C to 110 °C in 20 minutes, thus saving time and energy 
· 5-stage power consumption in combination with smaller yokes, allows smaller bearings to heat up safely and quickly with less energy 
· Automatic demagnetization 
· Supplied with three yokes as standard 
· Swivel arm including yoke adapter so that swivel arm can also be used with small yokes 
· 3 year manufacturer warranty 
 
<ins>Technical data for simatherm IH 090</ins> 
Designation: Heater with cooling fan for continuous operation with small to medium workpieces 
Voltage V / Hz / power: 
- 400 V / 50 Hz / 6.4 kVA 
- 440 – 480 V / 50–60 Hz / 7.4 kVA 
- 575 V / 60 Hz / 9.2 kVA 
Workpiece Maximum weight: 150kg 
Bore diameter: From 20 mm inner diameter to 400 mm outer diameter 
Temperature control: 
- Range: 0 – 250°C 
- Magnetic probe: yes, type K 
- Accuracy (electronic): ± 3°C 
Time control: 
- Range: 0 – 60 minutes 
 - Accuracy: ± 0.01 seconds 
Maximum temperature (approx.): 250°C 
Thermometer mode: yes 
Bearing temperature mode: yes 
Power level: 5 levels / 20-40-60-80-100% 
Automatic demagnetization / residual magnetism: yes / &lt; 2A/cm 
Suitable for heating sealed bearings: yes 
Suitable for heating pre-greased bearings: yes 
Error guide codes: yes 
Thermal overload protection: yes 
Maximum magnetic flux: 1.5 T 
Control panel: Keyboard with LED-display 
Size of the operating area (WxH): 145 x 205 mm 
Coil diameter: 115 mm 
Measurements (LxWxH): 420 x 280 x 420 mm 
Overall weight including yokes: 38 kg 
Number of standard yokes: 3 
Standard yokes: 
- 55 x 55 x 275 mm for bearings with a bore diameter of at least 78 mm 
- 28 x 28 x 275 mm for bearings with a bore diameter of at least 40 mm 
- 14 x 14 x 275 mm for bearings with a bore diameter of at least 20 mm 
Core cross-section: 55 x 55 mm 
Yoke storage: yes, integrated 
Cooling fan: standard 
Swivel arm: yes 
Housing material: aluminum 
 
<ins>Scope of delivery</ins> 
· 1x simatherm IH 090 
· 1x User manual 
· 1x Temperature probe 
· 1x Power cord 
· 1x Protective gloves 
· 1x Swivel arm 
· 1x Yoke adapter 
· 1x Yoke 14x14 for bearings with bore diameter from 20 mm 
· 1x Yoke 28x28 for bearings with bore diameter from 40 mm 
· 1x Yoke 55x55 for bearings with bore diameter from 78 mm 
Optional: 
· Yokes (10 x10 mm, 20 x 20 mm, 40 x 40 mm) 
 
 
Industry target groups and applications 
 
<ins>Fabrication and assembly</ins> 
· General mechanical engineering 
· Gearbox construction (vehicles and industry) 
· Pumps 
· Hydraulic equipment 
· Electric motor construction 
· Conveyor and conveying systems 
 
<ins>General operations maintenance</ins> 
· Metal processing industry 
· Paper and cardboard factories 
· Textile industry 
· Larger printing plants 
· Food industry 
· Building services 
· Vehicles (buses, trucks, rail vehicles) 
· Construction machinery 
· Forklifts, storage equipment / lifting devices 
 
<ins>Typical components which can be heated with the IH090</ins> 
· Rolling bearings 
· Gears 
· Gear rims 
· Shrink rings 
· Pistons 
· Bushings 
· Sleeves 
· Clutch parts 
 
<ins>Materials which can be heated well</ins> 
· Structural steel 
· Ball bearing steel 
· Grey cast iron 
· Cast steel
*Lead time: 3 to 4 weeks upon order confirmation


 <div class="img-ctnr">
 <amp-img 
 on="tap:b5kmc"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/BgvSA_6g~zSPhZMt2cO6sA.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="b5kmc" 
 layout="nodisplay"></amp-image-lightbox>

Simatherm Bearing Induction Heater Ih 090 (up to 150kg)

simatherm bearing induction heater ih 090 (up 150kg) pemanas induksi bantalan (hingga heaters aruhan (sehingga simatherm/西马瑟姆 轴承感应加热器 090（最大 150kg） 西马瑟姆

simatherm-bearing-induction-heater-ih-090-up-to-150kg

Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO

Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals

Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.

Rated Operational Voltage:Auxiliary Circuit 690 V AC

Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV

Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A

Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW

Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A

Rated Operational Current AC-15 (Ie):(24 V) 4 A

Rated Operational Current DC-13 (Ie):(24 V) 2.5 A

Conventional Free-air Thermal Current (Ith):Main Circuit 20 A

Rated Control Circuit Voltage (Uc):24 V DC

Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)

Degree of Protection:Auxiliary Circuit Terminals IP20

Minimum Switching Capacity:Auxiliary Circuit 17 V

Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour

Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²

Wire Stripping Length:Auxiliary Circuit 9 mm

Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m

Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

Power Loss:at Rated Operating Conditions per Pole 2 W

at Rated Operating Conditions AC-1 per Pole 1.4 W

<h3 class="md-block-header-three">Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:BC7-30-10-01</li><li>Product ID:GJL1313001R0101</li><li>EAN:4013614150159</li><li>Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals</li><li>Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.</li><li>Number of Poles:3</li><li>Mini Contactor Type:Mini Contactor</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V AC</li><li>Auxiliary Circuit 250 V DC</li><li>Main Circuit 690 V AC</li><li>Main Circuit 220 V DC</li><li>Rated Frequency (f):Control Circuit DC</li><li>Main Circuit 60 Hz</li><li>Main Circuit 50 Hz</li><li>Main Circuit DC</li><li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li><li>Main Circuit 6 kV</li><li>Rated Insulation Voltage (Ui):690 V</li><li>acc. to UL/CSA 600 V</li><li>Number of Main Contacts NC:0</li><li>Number of Main Contacts NO:3</li><li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A</li><li>(220 / 240 V) 55 °C 16 A</li><li>(380 / 440 V) 40 °C 20 A</li><li>(380 / 440 V) 55 °C 16 A</li><li>(690 V) 40 °C 6 A</li><li>(690 V) 55 °C 6 A</li><li>Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW</li><li>(400 V) Three Phase 5.5 kW</li><li>(500 V) Three Phase 5.5 kW</li><li>(690 V) Three Phase, NO 3 kW</li><li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A</li><li>Number of Auxiliary Contacts NC:0</li><li>Number of Auxiliary Contacts NO:1</li><li>Rated Operational Current AC-15 (Ie):(24 V) 4 A</li><li>(120 V) 4 A</li><li>(500 V) 2 A</li><li>(220 / 240 V) 4 A</li><li>(380 / 400 V) 3 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2.5 A</li><li>(110 V) 0.7 A</li><li>(220 / 240 V) 0.4 A</li><li>Conventional Free-air Thermal Current (Ith):Main Circuit 20 A</li><li>Rated Control Circuit Voltage (Uc):24 V DC</li><li>Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)</li><li>Degree of Protection:Auxiliary Circuit Terminals IP20</li><li>Control Circuit Terminals IP20</li><li>Main Circuit Terminals IP20</li><li>Mechanical Durability:10000000 cycle</li><li>Minimum Switching Capacity:Auxiliary Circuit 17 V</li><li>Auxiliary Circuit 5 mA</li><li>Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour</li><li>(AC-15) 600 cycles per hour</li><li>(AC-3) 600 cycles per hour</li><li>(DC-1) 600 cycles per hour</li><li>(DC-13) 600 cycles per hour</li><li>(DC-3) 600 cycles per hour</li><li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li><li>Flexible 1/2x 1 ... 2.5 mm²</li><li>Rigid 1/2x 1 ... 4 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 9 mm</li><li>Main Circuit 9 mm</li><li>Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m</li><li>Control Circuit 0.8 ... 1.1 N·m</li><li>Main Circuit 0.8 ... 1.1 N·m</li><li>Recommended Screw Driver:M3</li><li>Pozidriv 1</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Power Loss:at Rated Operating Conditions per Pole 2 W</li><li>at Rated Operating Conditions AC-1 per Pole 1.4 W</li><li>Standards:IEC/EN 60947-1</li><li>IEC/EN 60947-4-1</li><li>IEC/EN 60947-5-1</li><li>UL 60947-1</li><li>UL 60947-4-1</li><li>Unit of Measurement : Pcs</li></ul>

<h3>Abb BC7-30-10-01 Contactor Mini 24VDC 3P 3NO</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:BC7-30-10-01</li>
<li>Product ID:GJL1313001R0101</li>
<li>EAN:4013614150159</li>
<li>Catalog Description:BC7-30-10-01 Mini Contactor 24 V DC - 3 NO - 0 NC - Screw Terminals</li>
<li>Long Description:The BC7-30-10 mini contactor is a compact 3 pole contactor with 1 auxiliary contact and screw terminals. They are ideally suited for applications where reliability is a must and space is at a premium. Mini contactors are used in residential buldings, commercial buildings and industrial applications for the control of single or three-phase loads up to 5.5 kW (AC-3) and 20 A / 690 V (AC-1) or switching of control signals. Further features are the noiseless and hum-free coil, a switch position indication and the integrated possibility for rail or wall mounting.</li>
<li>Number of Poles:3</li>
<li>Mini Contactor Type:Mini Contactor</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V AC</li>
<li>Auxiliary Circuit 250 V DC</li>
<li>Main Circuit 690 V AC</li>
<li>Main Circuit 220 V DC</li>
<li>Rated Frequency (f):Control Circuit DC</li>
<li>Main Circuit 60 Hz</li>
<li>Main Circuit 50 Hz</li>
<li>Main Circuit DC</li>
<li>Rated Impulse Withstand Voltage (Uimp):Auxiliary Circuit 6 kV</li>
<li>Main Circuit 6 kV</li>
<li>Rated Insulation Voltage (Ui):690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Number of Main Contacts NC:0</li>
<li>Number of Main Contacts NO:3</li>
<li>Rated Operational Current AC-1 (Ie):(220 / 240 V) 40 °C 20 A</li>
<li>(220 / 240 V) 55 °C 16 A</li>
<li>(380 / 440 V) 40 °C 20 A</li>
<li>(380 / 440 V) 55 °C 16 A</li>
<li>(690 V) 40 °C 6 A</li>
<li>(690 V) 55 °C 6 A</li>
<li>Rated Operational Power AC-3 (Pe):(230 V) Three Phase 3 kW</li>
<li>(400 V) Three Phase 5.5 kW</li>
<li>(500 V) Three Phase 5.5 kW</li>
<li>(690 V) Three Phase, NO 3 kW</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):at 40 °C Ambient Temp, in Free Air, from a Cold State 10 s 96 A</li>
<li>Number of Auxiliary Contacts NC:0</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Rated Operational Current AC-15 (Ie):(24 V) 4 A</li>
<li>(120 V) 4 A</li>
<li>(500 V) 2 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(380 / 400 V) 3 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2.5 A</li>
<li>(110 V) 0.7 A</li>
<li>(220 / 240 V) 0.4 A</li>
<li>Conventional Free-air Thermal Current (Ith):Main Circuit 20 A</li>
<li>Rated Control Circuit Voltage (Uc):24 V DC</li>
<li>Coil Operating Limits:(acc. to IEC 60947-4-1) for DC supply 0.85 ... 1.1 x Uc (at θ ≤ 55 °C)</li>
<li>Degree of Protection:Auxiliary Circuit Terminals IP20</li>
<li>Control Circuit Terminals IP20</li>
<li>Main Circuit Terminals IP20</li>
<li>Mechanical Durability:10000000 cycle</li>
<li>Minimum Switching Capacity:Auxiliary Circuit 17 V</li>
<li>Auxiliary Circuit 5 mA</li>
<li>Maximum Electrical Switching Frequency:(AC-1) 300 cycles per hour</li>
<li>(AC-15) 600 cycles per hour</li>
<li>(AC-3) 600 cycles per hour</li>
<li>(DC-1) 600 cycles per hour</li>
<li>(DC-13) 600 cycles per hour</li>
<li>(DC-3) 600 cycles per hour</li>
<li>Connecting Capacity Main Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1/2x 1 ... 2.5 mm²</li>
<li>Flexible 1/2x 1 ... 2.5 mm²</li>
<li>Rigid 1/2x 1 ... 4 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 9 mm</li>
<li>Main Circuit 9 mm</li>
<li>Tightening Torque:Auxiliary Circuit 0.8 ... 1.1 N·m</li>
<li>Control Circuit 0.8 ... 1.1 N·m</li>
<li>Main Circuit 0.8 ... 1.1 N·m</li>
<li>Recommended Screw Driver:M3</li>
<li>Pozidriv 1</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Power Loss:at Rated Operating Conditions per Pole 2 W</li>
<li>at Rated Operating Conditions AC-1 per Pole 1.4 W</li>
<li>Standards:IEC/EN 60947-1</li>
<li>IEC/EN 60947-4-1</li>
<li>IEC/EN 60947-5-1</li>
<li>UL 60947-1</li>
<li>UL 60947-4-1</li>
<li>Unit of Measurement : Pcs</li>
</ul>

abb bc7-30-10-01 contactor mini 24vdc 3p 3no kontaktor contactors para kontraktor penyentuh penghubung bc7-30-10-01接触器迷你24vdc 接触器

abb-bc7-30-10-01-contactor-mini-24vdc-3p-3no

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Bolts

Panel Mount Indicators 

Electrical Wire 

RS Components ETH SG

Schneider Electric RPF2AJD Din Rail Power Relay, 12V Dc Coil, 30A Switching Current, Dpst

schneider electric rpf2ajd din rail power relay, 12v dc coil, 30a switching current, dpst relai daya rel rpf2ajd, kumparan 12v, arus pengalih 30a, relay geganti kuasa gegelung pensuisan electric/施耐德电气 导轨电源继电器，12v 直流线圈，30a 开关电流，dpst 功率继电器 施耐德电气

schneider-electric-rpf2ajd-din-rail-power-relay-12v-dc-coil-30a-switching-current-dpst

Schneider Electric LXM32AU60N4 7 Kw Servo Drive, 208 → 480 V, 3 Phase, 1.5 A, Encoder Feedback Function, 480 V

schneider electric lxm32au60n4 7kw servo drive, 208 480 v, phase, 1.5 a, encoder feedback function, penggerak kw, fase, 1,5 fungsi umpan balik encoder, motor management system fasa, maklum balas pengekod, electric/施耐德电气 伺服驱动器，208 v，3 相，1.5 a，编码器反馈功能，480 施耐德电气