CAT PUMPS

DAYTON

Jabsco

Leader

Leader Pumps

Sika

Pumps

pumps

Hand Pumps

hand-pumps

Pumps Accessories

pumps-accessories

Water Pumps

water-pumps

This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Stainless Steel manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water.

Drive Type(s): Belt, Flexible Coupling and Bellhousing

 • Triplex design delivers high efficiency and low pulsation. 

• Durable dual V-Packings are lubricated and cooled by pumped liquid. 

• Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.

• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.

• Standard NBR seals with alternative options for temperature and chemical compatibility. 

Introduction: This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Stainless Steel manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water.Technical Specifications:Max Flow: 14 gpm / 53 lpmMax Pressure: 3000Inlet Port Size1 1/2&quot; NPT(F)Discharge Port Size 1&quot; NPT(F)RPM: 800Drive Type(s): Belt, Flexible Coupling and BellhousingMaterial: 316 Stainless Steel FEATURES: • Triplex design delivers high efficiency and low pulsation. • Durable dual V-Packings are lubricated and cooled by pumped liquid. • Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.• Standard NBR seals with alternative options for temperature and chemical compatibility.

<ins>Introduction:</ins>&nbsp;
This is a triplex [three plunger rods] positive displacement, reciprocating, plunger pump, constructed of Stainless Steel manifolds, 316SS valve assemblies, solid ceramic plungers and standard NBR [Buna-N] seals and o-rings. These higher capacity plunger pumps are suitable for multi-gun and multi-nozzle, high pressure systems. and pumping special liquids such as salt water.
<ins>Technical Specifications:</ins>
Max Flow: 14 gpm / 53 lpm
Max Pressure: 3000
Inlet Port Size1 1/2" NPT(F)
Discharge Port Size 1" NPT(F)
RPM: 800
Drive Type(s): Belt, Flexible Coupling and Bellhousing
Material: 316 Stainless Steel&nbsp;
<ins> FEATURES:</ins>
&nbsp;• Triplex design delivers high efficiency and low pulsation.&nbsp;
• Durable dual V-Packings are lubricated and cooled by pumped liquid.&nbsp;
• Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Standard NBR seals with alternative options for temperature and chemical compatibility.&nbsp;

CAT Pumps 3511 Technical Data Sheet

CAT Pumps 3511 Service Manual

Ong Ming Jun Andre

Kranzle

Others

Pressure Washers

Lubricant Pumps

buyerIntroduction

Cat Pumps 35 Frame Plunger Pump 3511

cat pumps 35 frame plunger pump 3511 water pompa air pam pumps/猫泵 框架柱塞泵 水泵 猫泵

cat-pumps-35-frame-plunger-pump-3511

 This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel inlet manifold, duplex stainless steel discharge manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. 

Drive Type(s)Belt, Flexible Coupling and Bellhousing

Introduction: This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel inlet manifold, duplex stainless steel discharge manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Technical Specifications: Max Flow40 gpm / 151.4 lpmMax Pressure2000Inlet Port Size1 1/2&quot; NPT(F)Discharge Port Size1&quot; NPT(F)RPM888Drive Type(s)Belt, Flexible Coupling and BellhousingMaterial316 Stainless Steel • Triplex design delivers high efficiency and low pulsation. • Durable dual V-Packings are lubricated and cooled by pumped liquid. • Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.• Standard NBR seals with alternative options for temperature and chemical compatibility.

<ins>Introduction:</ins>&nbsp;
&nbsp;This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with a 316 stainless steel inlet manifold, duplex stainless steel discharge manifold, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.&nbsp;
<ins>Technical Specifications:</ins>
&nbsp;Max Flow40 gpm / 151.4 lpm
Max Pressure2000
Inlet Port Size1 1/2" 
NPT(F)Discharge Port Size
1" NPT(F)RPM888
Drive Type(s)Belt, Flexible Coupling and Bellhousing
Material316 Stainless Steel&nbsp;
&nbsp;• Triplex design delivers high efficiency and low pulsation.&nbsp;
• Durable dual V-Packings are lubricated and cooled by pumped liquid.&nbsp;
• Pre-set Lo-pressure seals provide secondary protection against external leaks and require no packing adjustment.
• Special high-density, polished, concentric plungers provide a true wear surface and extended seal life.
• Standard NBR seals with alternative options for temperature and chemical compatibility.&nbsp;

3531 Data Sheet

35 Frame Stainless Steel Plunger Pump 3531DHS

35 frame stainless steel plunger pump 3531dhs pompa bingkai water pumps air cat pam keluli tahan karat pumps/猫泵 35框架不锈钢柱塞泵3531dhs 水泵 猫泵

35-frame-stainless-steel-plunger-pump-3531dhs

This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.

• Triplex plunger design ensures high efficiency and low pulsation. 

• Durable high-pressure seals are lubricated and cooled by pumped liquid.

 • Preset low-pressure seals provide secondary protection against external leaks and require no packing adjustments.

 • Belt-driven option provides precision flow setting.

 • Direct-drive option offers a compact footprint for SAE hydraulic motors with a bell housing/flexible coupler assembly. 

• Model 2531C offers an external flush for high-temperature or lowlubricity liquids.

 • Pump comes standard with NBR seals. 

Alternative seal materials are available for higher temperature or chemical compatibility 

INTRODUCTION:This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings. Technical Specifications Max Flow: 25 gpm / 94.6 lpmMax Pressure1200Inlet Port Size: 1 1/4&quot; NPT(F)Discharge Port Size: 3/4&quot; NPT(F)RPM: 1025Drive Type(s): Belt, ClutchMaterial: 316 Stainless Steel FEATURES • Triplex plunger design ensures high efficiency and low pulsation. • Durable high-pressure seals are lubricated and cooled by pumped liquid. • Preset low-pressure seals provide secondary protection against external leaks and require no packing adjustments. • Belt-driven option provides precision flow setting. • Direct-drive option offers a compact footprint for SAE hydraulic motors with a bell housing/flexible coupler assembly. • Model 2531C offers an external flush for high-temperature or lowlubricity liquids. • Pump comes standard with NBR seals. <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/gmAwD25RWnO4TXyN9IwvZI.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>Alternative seal materials are available for higher temperature or chemical compatibility

&nbsp;
<ins>INTRODUCTION:</ins>
This triplex (three plunger rods) positive displacement, reciprocating plunger pump is constructed with 316 stainless steel manifolds, 316 stainless steel valve assemblies, solid ceramic plungers and standard NBR (Buna-N) seals and O-rings.

<ins>Technical Specifications</ins>
 
Max Flow: 25 gpm / 94.6 lpm
Max Pressure1200
Inlet Port Size: 1 1/4" NPT(F)
Discharge Port Size: 3/4" NPT(F)
RPM: 1025
Drive Type(s): Belt, Clutch
Material: 316 Stainless Steel

<ins>FEATURES </ins>
• Triplex plunger design ensures high efficiency and low pulsation.&nbsp;
• Durable high-pressure seals are lubricated and cooled by pumped liquid.
&nbsp;• Preset low-pressure seals provide secondary protection against external leaks and require no packing adjustments.
&nbsp;• Belt-driven option provides precision flow setting.
&nbsp;• Direct-drive option offers a compact footprint for SAE hydraulic motors with a bell housing/flexible coupler assembly.&nbsp;
• Model 2531C offers an external flush for high-temperature or lowlubricity liquids.
&nbsp;• Pump comes standard with NBR seals.&nbsp;

 <div class="img-ctnr">
 <amp-img 
 on="tap:2tepd"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/gmAwD25RWnO4TXyN9IwvZI.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2tepd" 
 layout="nodisplay"></amp-image-lightbox>

 
Alternative seal materials are available for higher temperature or chemical compatibility&nbsp;

25 Plunger Pump Technical Data Sheet

25 PFR Plunger Pump Service Manual

Cat Pumps 25 Frame Plunger Pump 2531

cat pumps 25 frame plunger pump 2531 pompa rangka water air pam pumps/猫泵 框架柱塞泵 水泵 猫泵

cat-pumps-25-frame-plunger-pump-2531

 Due to the design of positive displacement pumps, small pressure spikes are caused during each rotation. In certain operations, these spikes can cause accelerated wear or damage to the pump or downstream components. The installation of a pulsation dampener is the best practice to reduce pressure fluctuations 

 • Protects downstream components (e.g., regulator, unloader, relief valve) 

• Reduces water hammer • Improved performance at low rpm  

Introduction: Due to the design of positive displacement pumps, small pressure spikes are caused during each rotation. In certain operations, these spikes can cause accelerated wear or damage to the pump or downstream components. The installation of a pulsation dampener is the best practice to reduce pressure fluctuations Pulsation Dampener Benefits: • Produces smooth, consistent flow • Protects downstream components (e.g., regulator, unloader, relief valve) • Reduces water hammer • Improved performance at low rpm

<ins>Introduction:</ins>
&nbsp;Due to the design of positive displacement pumps, small pressure spikes are caused during each rotation. In certain operations, these spikes can cause accelerated wear or damage to the pump or downstream components. The installation of a pulsation dampener is the best practice to reduce pressure fluctuations&nbsp;
<ins> Pulsation Dampener Benefits</ins>:&nbsp;
• Produces smooth, consistent flow
&nbsp;• Protects downstream components (e.g., regulator, unloader, relief valve)&nbsp;
• Reduces water hammer • Improved performance at low rpm&nbsp;&nbsp;

Cat Pumps Accessories Catalogue

Pedrollo

Burks

MITSUBISHI

Barnes

Diaphragm Pumps

Rotating Piston Pumps

Rotary Pumps

Electrical Flexible Hose

Multi Purpose Cleaners

Rice, Cereal, Water & Sauce Dispensers

Pulsation Dampener

pulsation dampener peredam denyut pumps accessories aksesoris pompa cat denyutan aksesori pam pumps/猫泵 脉动阻尼器 泵配件 猫泵

pulsation-dampener

SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.

Quality assurance and test equipment monitoring

Practical 
The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.

The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.

In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test.  

Mobile and independent 
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation.  

Basic version and Solid version 
Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert. 

G¼ with quick coupling and pressure hose (1m) 

Chrome-plated brass -    G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼  

Model: Type P700.3 Range: 0 to 700 BarSIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.<ul class="md-block-unordered-list-item"><li>Assembly and commissioning</li><li>Manufacturing and production</li><li>Maintenance and service</li><li>Quality assurance and test equipment monitoring</li><li>Repair</li></ul>Practical The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test. Mobile and independent SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. Basic version and Solid version Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert. What&#x27;s included? <ul class="md-block-unordered-list-item"><li>P700.3 hand test pump</li><li>G¼ with quick coupling and pressure hose (1m) </li><li>Chrome-plated brass - G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼ </li><li>PA flat gaskets and O-rings </li></ul>

Model: Type P700.3 
Range: 0 to 700 Bar
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.
<ul>
<li>Assembly and commissioning</li>
<li>Manufacturing and production</li>
<li>Maintenance and service</li>
<li>Quality assurance and test equipment monitoring</li>
<li>Repair</li>
</ul>
Practical 
The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.
The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.
In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test.&nbsp;&nbsp;
Mobile and independent 
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation.&nbsp;&nbsp;
Basic version and Solid version 
Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert.&nbsp;
What's included?&nbsp;
<ul>
<li>P700.3 hand test pump</li>
<li>G¼ with quick coupling and pressure hose (1m)&nbsp;</li>
<li>Chrome-plated brass - G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼&nbsp;&nbsp;</li>
<li>PA flat gaskets and O-rings&nbsp;</li>
</ul>
&nbsp;

SIKA Hand Pump

Adelene

Druck

Other Measuring Tools

Humidity & Temperature

Adelene Teow

Sika Hydraulic Hand Test Pump - P700.3

sika hydraulic hand test pump p700.3 pompa uji tangan hidraulik pumps pam 西卡液压手动测试泵-p700.3 手动泵 西卡

sika-hydraulic-hand-test-pump-p700-3

Model: Type P60
Range: -1 to 60 Bar

SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.

Chrome-plated brass -  G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼  

Model: Type P60 Range: -1 to 60 Bar SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.<ul class="md-block-unordered-list-item"><li>Assembly and commissioning</li><li>Manufacturing and production</li><li>Maintenance and service</li><li>Quality assurance and test equipment monitoring</li><li>Repair</li></ul>Practical The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test. Mobile and independent SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. Basic version and Solid version Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert. What&#x27;s included? <ul class="md-block-unordered-list-item"><li>P60 hand test pump</li><li>G¼ with quick coupling and pressure hose (1m) </li><li>Chrome-plated brass - G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼ </li><li>PA flat gaskets and O-rings </li></ul>

Model: Type P60 
Range: -1 to 60 Bar 
 
SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.
<ul>
<li>Assembly and commissioning</li>
<li>Manufacturing and production</li>
<li>Maintenance and service</li>
<li>Quality assurance and test equipment monitoring</li>
<li>Repair</li>
</ul>
Practical 
The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.
The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.
In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test.&nbsp;&nbsp;
Mobile and independent 
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation.&nbsp;&nbsp;
Basic version and Solid version 
Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert.&nbsp;
What's included?&nbsp;
<ul>
<li>P60 hand test pump</li>
<li>G¼ with quick coupling and pressure hose (1m)&nbsp;</li>
<li>Chrome-plated brass - G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼&nbsp;&nbsp;</li>
<li>PA flat gaskets and O-rings&nbsp;</li>
</ul>

Sika Pneumatic Hand Test Pump - P60

sika pneumatic hand test pump p60 pompa tes tangan pneumatik pumps pam uji 西卡气动手动测试泵-p60 手动泵 西卡

sika-pneumatic-hand-test-pump-p60

The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller, Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a 1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to protect pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase, 550 Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72 standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor pumps are self-priming, portable and versatile, making them ideal for a wide range of applications wherever AC power is available.

Shaft Seal: Nitrile/Carbon/Ceramic Mechanical Seal

Port Size: Ports are 1-1/2 Inch BSP threaded

Dry running capability for 30 minutes without damage to pump

Connections: 1½” BSP internal threaded ports

Dimensions: 330mm long, 250mm wide, 240mm high

Built-in dry-running protection for up to 30 minutes after initial prime

Corrosion resistant bronze body, stainless steel shaft

Simple, fully serviceable design with few wearing parts

Introduction:The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller, Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a 1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to protect pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase, 550 Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72 standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor pumps are self-priming, portable and versatile, making them ideal for a wide range of applications wherever AC power is available.<h4 class="md-block-header-four">Features :</h4>Pump Body:Bronze Impeller: Nitrile Shaft Seal: Nitrile/Carbon/Ceramic Mechanical SealPort Size: Ports are 1-1/2 Inch BSP threaded<h4 class="md-block-header-four">Product Specs :</h4>Self primes from dry up to 9.8 feetFlows up to 21 gal per minutePressure up to 29 psiHandles hard or soft solidsTolerates abrasive wearNon pulsating flowHandles viscosities up to 500 centiPoiseUses Continuously Rated MotorDry running capability for 30 minutes without damage to pumpOthers:<ul class="md-block-unordered-list-item"><li>Connections: 1½” BSP internal threaded ports</li><li>Dimensions: 330mm long, 250mm wide, 240mm high</li><li>Output: up to 80 litres/minute</li><li>Built-in dry-running protection for up to 30 minutes after initial prime</li><li>Rapid self-priming from dry up to 3m</li><li>Will handle hard or soft solids</li><li>Corrosion resistant bronze body, stainless steel shaft</li><li>Carbon-ceramic mechanical shaft seal</li><li>Simple, fully serviceable design with few wearing parts</li><li>Continuously Rated Motor</li></ul>

<ins>Introduction:</ins>
The Jabsco 53081-2003 is a bronze Flexible Impeller pump with a Nitrile Impeller, Nitrile/Carbon/Ceramic Mechanical Seal, 1-1/2 Inch BSP threaded Ports, coupled to a 1450 RPM, 230 Volts, 50 HZ Motor. This Pump has an integral fluid reservoir to protect pump against dry running for up to 30 minutes. The motor is 4 Pole, single phase, 550 Watt, AC. Face and Foot mounting B3-B14. Enclosure IP55, Frame size 80 all IEC 72 standard. Fitted with manual reset thermal overload. Jabsco bronze bodied AC motor pumps are self-priming, portable and versatile, making them ideal for a wide range of applications wherever AC power is available.
<h4><ins>Features :</ins></h4>
Pump Body:Bronze&nbsp;
Impeller: Nitrile&nbsp;
Shaft Seal: Nitrile/Carbon/Ceramic Mechanical Seal
Port Size: Ports are 1-1/2 Inch BSP threaded
<h4><ins>Product Specs :</ins></h4>
Self primes from dry up to 9.8 feet
Flows up to 21 gal per minute
Pressure up to 29 psi
Handles hard or soft solids
Tolerates abrasive wear
Non pulsating flow
Handles viscosities up to 500 centiPoise
Uses Continuously Rated Motor
Dry running capability for 30 minutes without damage to pump
<ins>Others:</ins>
<ul>
<li>Connections: 1½” BSP internal threaded ports</li>
<li>Dimensions: 330mm long, 250mm wide, 240mm high</li>
<li>Output: up to 80 litres/minute</li>
<li>Built-in dry-running protection for up to 30 minutes after initial prime</li>
<li>Rapid self-priming from dry up to 3m</li>
<li>Will handle hard or soft solids</li>
<li>Corrosion resistant bronze body, stainless steel shaft</li>
<li>Carbon-ceramic mechanical shaft seal</li>
<li>Simple, fully serviceable design with few wearing parts</li>
<li>Continuously Rated Motor</li>
</ul>

Operating Manual

Technical Specifications

TSURUMI PUMP

Crane Pumps & Systems

Jabsco 1.5 Inch Self-Priming Utility Pump

jabsco 1.5 inch self-priming utility pump pompa utilitas 1,5 water pumps air pam utiliti penyebuan sendiri inci jabsco/雅布斯科 英寸自吸实用泵 水泵 雅布斯科

jabsco-1-5-inch-self-priming-utility-pump

 2" bronze pump, 270-size, foot-mounted with BSP threaded ports 

Packaged Dimensions: L:34.00 x H:28.00 x W:27.00cm

Actual Weight: 9.12 Kg  (Approx. 10.12 Kg packed)

Constructed from marine quality bronze and stainless steel 

Handles hard and soft solids without clogging

Introduction: 2&quot; bronze pump, 270-size, foot-mounted with BSP threaded ports <ul class="md-block-unordered-list-item"><li>Connections: 2” BSP Ports</li><li>Output: Nominal 270l/min @ 1500rpm</li><li>Packaged Dimensions: L:34.00 x H:28.00 x W:27.00cm</li><li>Actual Weight: 9.12 Kg  (Approx. 10.12 Kg packed)</li><li></li></ul>Features:<ol class="md-block-ordered-list-item"><li>Constructed from marine quality bronze and stainless steel </li><li>Self-prime from dry up to 3m </li><li>Easy to service and maintain </li><li>Will tolerate abrasive wear</li><li>Handles hard and soft solids without clogging</li><li>Can pump in either direction</li><li>Will not airlock </li></ol> Available Models: 52270-2011 Standard Neoprene Impeller 52270-2003 Oil resistant Nitrile 52270-2021 High pressure Neoprene

<ins>Introduction:</ins>
&nbsp;2" bronze pump, 270-size, foot-mounted with BSP threaded ports&nbsp;
&nbsp;
<ul>
<li>Connections: 2” BSP Ports</li>
<li>Output: Nominal 270l/min @ 1500rpm</li>
<li>Packaged Dimensions: L:34.00 x H:28.00 x W:27.00cm</li>
<li>Actual Weight: 9.12 Kg  (Approx. 10.12 Kg packed)</li>
<li></li>
</ul>
<ins>Features:</ins>
<ol>
<li>Constructed from marine quality bronze and stainless steel&nbsp;</li>
<li>Self-prime from dry up to 3m&nbsp;</li>
<li>Easy to service and maintain&nbsp;</li>
<li>Will tolerate abrasive wear</li>
<li>Handles hard and soft solids without clogging</li>
<li>Can pump in either direction</li>
<li>Will not airlock&nbsp;&nbsp;</li>
</ol>

<ins>Available Models:</ins>
 
 52270-2011 Standard Neoprene Impeller&nbsp;
52270-2003 Oil resistant Nitrile
&nbsp;52270-2021 High pressure Neoprene&nbsp;

BRONZE FLEXIBLE IMPELLER PEDESTAL PUMP 

PACKO

Foot Mounted Engine Cooling Pump (2"BSP)

foot mounted engine cooling pump (2"bsp) pompa pendingin yang dipasang di kaki water pumps air jabsco pam penyejuk enjin lekap jabsco/雅布斯科 脚踏式发动机冷却泵 水泵 雅布斯科

foot-mounted-engine-cooling-pump-2-bsp

SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. 

SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.

Practical
The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.

In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test.


Mobile and independent
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation.


Basic version and Solid version
Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert. 

Model: Type P40.2 Range: -1 to 40 BarSIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.<ul class="md-block-unordered-list-item"><li>Assembly and commissioning</li><li>Manufacturing and production</li><li>Maintenance and service</li><li>Quality assurance and test equipment monitoring</li><li>Repair</li></ul>Practical The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test. Mobile and independent SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. Basic version and Solid version Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert. What&#x27;s included? <ul class="md-block-unordered-list-item"><li>P40.2 hand test pump</li><li>G¼ with quick coupling and pressure hose (1m) </li><li>Chrome-plated brass - G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼ </li><li> PA flat gaskets and O-rings </li></ul>

Model: Type P40.2 
Range: -1 to 40 Bar
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation.&nbsp;
SIKA test pumps and pressure generators can be used everywhere, including on site in workshops, test and measurement rooms as well as laboratories. They cover a broad spectrum of industries with diverse applications.
<ul>
<li>Assembly and commissioning</li>
<li>Manufacturing and production</li>
<li>Maintenance and service</li>
<li>Quality assurance and test equipment monitoring</li>
<li>Repair</li>
</ul>
Practical 
The test pumps and pressure generators are designed to enable the direct connection of all pressure systems to be tested using adapters. The test sample is easily connected using the rugged industrial hose with integrated quick coupling and supplied adapters. The reference is fitted directly at the top of the pump using a positioning adapter.
The required test pressure is initially generated using the handles and then adjusted precisely with the fine adjustment valve. As a result, the pressure on both instruments is the same. The pressure relief valve allows continuous pressure reduction and ensures accurate and easy testing, even with decreasing pressure.
In the simplest case, the pressure is indicated by an analogue pressure gauge. An easy to read digital pressure gauge or hand-held instrument can also be used. The accuracy or adjustment of the pressure measuring device being tested can be checked by comparing the indicated reference value with the measured value for the device under test. 

Mobile and independent 
SIKA test pumps and pressure generators are ideal for mobile use. Their low weight and compact design make them easy to transport directly to the measurement site. The instruments can be used immediately and do not require an additional  power supply. There is no need to take along nitrogen bottles or connect the equipment to a compressed air network. Wear-free manual pressure generation is simple and easy, regardless of ambient temperature and orientation. 

Basic version and Solid version 
Depending on the model a matching pressure hose is part of the basic configuration of the Basic version of the test pump. The hydraulic hoses are fitted with a self-sealing quick coupling. Inch, conical or metric adapters for all commonly used connection threads are available in the Solid version. A matching seal kit is also included with the pump. All of the equipment is held in a carrying case with a foam-rubber insert.&nbsp;
What's included?&nbsp;
<ul>
<li>P40.2 hand test pump</li>
<li>G¼ with quick coupling and pressure hose (1m)&nbsp;</li>
<li>Chrome-plated brass - G⅛, G¼, G⅜, G½, ⅛ NPT, ¼ NPT, ½ NPT, M12 x 1.5, M20 x 1.5, G⅛, G¼&nbsp;&nbsp;</li>
<li>&nbsp;PA flat gaskets and O-rings&nbsp;</li>
</ul>

Sika Pneumatic Hand Test Pump - P40.2

sika pneumatic hand test pump p40.2 pompa tes tangan pneumatik pumps pam uji 西卡气动手动测试泵-p40.2 手动泵 西卡

sika-pneumatic-hand-test-pump-p40-2

3/4Hp (5280GPH) Heavy-duty submersible pump. Used for drainage, emptying, pumping water between containers; to circulate water in garden ponds; and create water falls and play water features. Suitable to pump dirty water containing particles with maximum diameter up to 1½”.

Supplied with power cable with plug, self-sealing fitting and 4-step fitting

Introduction: 3/4Hp (5280GPH) Heavy-duty submersible pump. Used for drainage, emptying, pumping water between containers; to circulate water in garden ponds; and create water falls and play water features. Suitable to pump dirty water containing particles with maximum diameter up to 1½”. Features:<ul class="md-block-unordered-list-item"><li>Wear resistant shaft and impeller</li><li>Anti-corrosive and rust-proof materials</li><li>Motor with thermal overload protection</li><li>Supplied with power cable with plug, self-sealing fitting and 4-step fitting</li><li>16 ft power cord</li><li>1-1/2&quot; Outlet</li></ul>

<ins>Introduction:</ins>&nbsp;
3/4Hp (5280GPH) Heavy-duty submersible pump. Used for drainage, emptying, pumping water between containers; to circulate water in garden ponds; and create water falls and play water features. Suitable to pump dirty water containing particles with maximum diameter up to 1½”.
&nbsp;Features:
<ul>
<li>Wear resistant shaft and impeller</li>
<li>Anti-corrosive and rust-proof materials</li>
<li>Motor with thermal overload protection</li>
<li>Supplied with power cable with plug, self-sealing fitting and 4-step fitting</li>
<li>16 ft power cord</li>
<li>1-1/2" Outlet</li>
</ul>

Leader Pumps Catalogue

Pneumatic Regulators

1.5 Inch Heavy Duty Submersible Drainage Pump

1.5 inch heavy duty submersible drainage pump pompa drainase tugas berat 1,5 water pumps air leader pam saliran inci pumps/领导者泵 1.5英寸重型潜水排水泵 水泵 领导者泵

1-5-inch-heavy-duty-submersible-drainage-pump

Grainger

Dayton 3ACD5 Impeller/Sleeve Assy Nitrile for 3ACD3

dayton 3acd5 impeller/sleeve assy nitrile 3acd3 rakitan impeller/selongsong nitril untuk pumps accessories aksesoris pompa aksesori pam 叶轮/套筒总成 腈纶 适用于 泵配件 代顿

dayton-3acd5-impeller-sleeve-assy-nitrile-for-3acd3

Dayton 3ABZ9 Nitrile Impeller/Sleeve Assembly

dayton 3abz9 nitrile impeller/sleeve assembly rakitan impeller/selongsong nitril pumps accessories aksesoris pompa impeller/pemasangan lengan aksesori pam 腈纶叶轮/套筒组件 泵配件 代顿

dayton-3abz9-nitrile-impeller-sleeve-assembly

Dayton 3ACA3 Neoprene Impeller/Sleeve Assembly

dayton 3aca3 neoprene impeller/sleeve assembly rakitan impeller/selongsong pumps accessories aksesoris pompa neoprena impeller/pemasangan lengan aksesori pam 氯丁橡胶叶轮/套筒组件 泵配件 代顿

dayton-3aca3-neoprene-impeller-sleeve-assembly

Dayton 3ACE4 Impeller/Sleeve Assy Nitrile for 3ACC5

dayton 3ace4 impeller/sleeve assy nitrile 3acc5 rakitan impeller/selongsong nitril untuk pumps accessories aksesoris pompa aksesori pam 叶轮/套筒总成丁腈橡胶，适用于 泵配件 代顿

dayton-3ace4-impeller-sleeve-assy-nitrile-for-3acc5

Dayton 3ACE3 Impeller/Sleeve Assy Nitrile for 3ACC4

dayton 3ace3 impeller/sleeve assy nitrile 3acc4 rakitan impeller/selongsong nitril untuk pumps accessories aksesoris pompa aksesori pam 叶轮/套筒总成丁腈橡胶，适用于 泵配件 代顿

dayton-3ace3-impeller-sleeve-assy-nitrile-for-3acc4

Dayton 3ABZ8 Nitrile Impeller/Sleeve Assembly

dayton 3abz8 nitrile impeller/sleeve assembly rakitan impeller/selongsong nitril pumps accessories aksesoris pompa impeller/pemasangan lengan aksesori pam 腈纶叶轮/套筒组件 泵配件 代顿

dayton-3abz8-nitrile-impeller-sleeve-assembly

Dayton 3ABZ7 Nitrile Impeller/Sleeve Assembly

dayton 3abz7 nitrile impeller/sleeve assembly rakitan impeller/selongsong nitril pumps accessories aksesoris pompa impeller/pemasangan lengan aksesori pam 腈纶叶轮/套筒组件 泵配件 代顿

dayton-3abz7-nitrile-impeller-sleeve-assembly

Dayton 3ACA2 Neoprene Impeller/Sleeve Assembly

dayton 3aca2 neoprene impeller/sleeve assembly rakitan impeller/selongsong pumps accessories aksesoris pompa impeller/pemasangan lengan aksesori pam 氯丁橡胶叶轮/套筒组件 泵配件 代顿

dayton-3aca2-neoprene-impeller-sleeve-assembly

Dayton 3ACA1 Neoprene Impeller/Sleeve Assembly

dayton 3aca1 neoprene impeller/sleeve assembly rakitan impeller/selongsong pumps accessories aksesoris pompa neoprena impeller/pemasangan lengan aksesori pam 氯丁橡胶叶轮/套筒组件 泵配件 代顿

dayton-3aca1-neoprene-impeller-sleeve-assembly

Dayton 811D85 Wear Ring for Pump Straight Centrifugal

 • Pump Type: Centrifugal (Straight)
• Material: Standard wear ring material
• Gasket: Not included

<h3 class="md-block-header-three">Dayton 811D85 Wear Ring for Pump Straight Centrifugal</h3> • Pump Type: Centrifugal (Straight) • Material: Standard wear ring material • Gasket: Not included

<h3>Dayton 811D85 Wear Ring for Pump Straight Centrifugal</h3>
&nbsp;• Pump Type: Centrifugal (Straight) 
• Material: Standard wear ring material 
• Gasket: Not included

dayton 811d85 wear ring pump straight centrifugal cincin keausan untuk pompa sentrifugal lurus pumps accessories aksesoris aksesori pam dayton/代顿 直离心泵耐磨环 泵配件 代顿

dayton-811d85-wear-ring-for-pump-straight-centrifugal

1/2 horsepower motor with thermic overload protection

Excellent cooling of the motor allows operation while only partially submerged

Includes Float Switch to switch a pump on and off relative to its water levels

Technical Specifications:Rated power:	750WMaximum head	9 mMaximum delivery	250 L/mLow suction capability	10Output size 1 1⁄4”Maximum particles size	5 mmDimension	14 x 14 x 30.2Weight	5.3 kgNumber of pumps per pallet	72+48 Features:1/2 horsepower motor with thermic overload protectionAnti-corrosive and rust-proof materialsWear resistant shaft and impellerExcellent cooling of the motor allows operation while only partially submergedIncludes Float Switch to switch a pump on and off relative to its water levelsMade in Italy

<ins>Technical Specifications:</ins>
Rated power:	750W
Maximum head	9 m
Maximum delivery	250 L/m
Low suction capability	10
Output size 1 1⁄4”
Maximum particles size	5 mm
Dimension	14 x 14 x 30.2
Weight	5.3 kg
Number of pumps per pallet	72+48

<ins>Features:</ins>
1/2 horsepower motor with thermic overload protection
Anti-corrosive and rust-proof materials
Wear resistant shaft and impeller
Excellent cooling of the motor allows operation while only partially submerged
Includes Float Switch to switch a pump on and off relative to its water levels
Made in Italy

Leader Pumps Catalogue and Technical Data

Leader Pumps Ecosub 420A Multi-purpose Automatic Submersible Water Pump

leader pumps ecosub 420a multi-purpose automatic submersible water pump pompa air otomatis serbaguna pam pemimpin rendam automatik pelbagai guna leader/领导者 多功能自动潜水泵 水泵 领导者

leader-pumps-ecosub-420a-multi-purpose-automatic-submersible-water-pump

Low suction capability: 30mm above ground level

Intended for drainage and pumping of dirty water between containers

1/3 horsepower motor with thermic overload protection

Technical Specifications:Voltage: 230V, Single Phase, 50HzRated power: 650WMaximum head: 9 mMaximum delivery: 230 L/mLow suction capability: 30mm above ground levelOutput size: 1 1⁄4”Maximum particles size: 30 mmDimension: 14 x 14 x 33.5 cm3Weight: 5.4 kg Features:Intended for drainage and pumping of dirty water between containers1/3 horsepower motor with thermic overload protectionAnti-corrosive and rust-proof materialsWear resistant shaft and impellerExcellent cooling of the motor allows operation while only partially submergedMade in Italy

<ins>Technical Specifications:</ins>
Voltage: 230V, Single Phase, 50Hz
Rated power: 650W
Maximum head: 9 m
Maximum delivery: 230 L/m
Low suction capability: 30mm above ground level
Output size: 1 1⁄4”
Maximum particles size: 30 mm
Dimension: 14 x 14 x 33.5 cm3
Weight: 5.4 kg

<ins>Features:</ins>
Intended for drainage and pumping of dirty water between containers
1/3 horsepower motor with thermic overload protection
Anti-corrosive and rust-proof materials
Wear resistant shaft and impeller
Excellent cooling of the motor allows operation while only partially submerged
Made in Italy