RS Pro

Mechanical Parts

mechanical-parts

O Ring

o-ring

O Ring Cords 

o-ring-cords

ORING Viton Fluoroelastomers (FKM) 75 Shore 

ORING Viton Fluoroelastomers (FKM) 75 Shore O-RING PART NUMBER: JIS B2401 P8 VITON

ORING Viton Fluoroelastomers (FKM) 75 Shore&nbsp;
O-RING PART NUMBER: JIS B2401 P8 VITON

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

O-RING Part Number: Jis B2401 P8 Viton

o-ring part number: jis b2401 p8 viton nomor bagian o-ring: ring oem nombor bahagian gelang oem/oem代工 形圈零件编号：jis o型圈 oem代工

o-ring-part-number-jis-b2401-p8-viton

ORING Viton Fluoroelastomers (FKM) 75 Shore O-RING PART NUMBER: JIS B2401 P20 VITON

ORING Viton Fluoroelastomers (FKM) 75 Shore&nbsp;
O-RING PART NUMBER: JIS B2401 P20 VITON

O-RING Part Number: Jis B2401 P20 Viton

o-ring part number: jis b2401 p20 viton nomor bagian o-ring: ring oem nombor bahagian gelang oem/oem代工 形圈零件编号：jis o型圈 oem代工

o-ring-part-number-jis-b2401-p20-viton

ORING Viton Fluoroelastomers (FKM) 75 Shore O-RING PART NUMBER: JIS B2401 G30 VITON

ORING Viton Fluoroelastomers (FKM) 75 Shore&nbsp;
O-RING PART NUMBER: JIS B2401 G30 VITON

O-RING Part Number: Jis B2401 G30 Viton

o-ring part number: jis b2401 g30 viton nomor bagian o-ring: ring oem nombor bahagian gelang oem/oem代工 形圈零件编号：jis o型圈 oem代工

o-ring-part-number-jis-b2401-g30-viton

Datasheet

RS PRO Datasheet

RS PRO O-Rings Overview

Siemens

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

MEAN WELL

Omron

Screw

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 129044 Fluorocarbon Elastomer O-Ring, 9.25mm Bore, 12.7mm Outer Diameter (1 Bag of 50)

rs pro 129044 fluorocarbon elastomer o-ring, 9.25mm bore, 12.7mm outer diameter (1 bag 50) lubang 9,25mm, luar 12,7mm kantong isi ring o-ring cincin fluorokarbon, bor 9.25mm, beg gelang pro/rs专业版 氟碳弹性体 形圈，9.25 毫米内径，12.7 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-129044-fluorocarbon-elastomer-o-ring-9-25mm-bore-12-7mm-outer-diameter-1-bag-of-50

PHOENIX CONTACT

Mag-Lite

Wago

Kimberly Clark

HEICO

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Fuses & Fusegear

Rs Pro 2556465 Fkm O-Ring, 33.7mm Bore, 40.7mm Outer Diameter (1 Bag of 2)

rs pro 2556465 fkm o-ring, 33.7mm bore, 40.7mm outer diameter (1 bag 2) lubang 33,7mm, luar 40,7mm kantong berisi ring o-ring bore 33.7mm, beg gelang 形圈，33.7 毫米内径，40.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556465-fkm-o-ring-33-7mm-bore-40-7mm-outer-diameter-1-bag-of-2

Rs Pro 2556482 Fkm O-Ring, 39.7mm Bore, 46.7mm Outer Diameter (1 Bag of 2)

rs pro 2556482 fkm o-ring, 39.7mm bore, 46.7mm outer diameter (1 bag 2) lubang 39,7mm, luar 46,7mm kantong isi ring o-ring bore 39.7mm, beg gelang pro/rs专业版 型圈，39.7 毫米内径，46.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556482-fkm-o-ring-39-7mm-bore-46-7mm-outer-diameter-1-bag-of-2

Rs Pro 2556471 Fkm O-Ring, 35.7mm Bore, 42.7mm Outer Diameter (1 Bag of 2)

rs pro 2556471 fkm o-ring, 35.7mm bore, 42.7mm outer diameter (1 bag 2) lubang 35,7mm, luar 42,7mm kantong isi ring o-ring bore 35.7mm, beg gelang 型圈，35.7 毫米内径，42.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556471-fkm-o-ring-35-7mm-bore-42-7mm-outer-diameter-1-bag-of-2

Rs Pro 2556477 Fkm O-Ring, 38.7mm Bore, 45.7mm Outer Diameter (1 Bag of 2)

rs pro 2556477 fkm o-ring, 38.7mm bore, 45.7mm outer diameter (1 bag 2) lubang 38,7mm, luar 45,7mm kantong isi ring o-ring bore 38.7mm, beg gelang 型圈，38.7 毫米内径，45.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556477-fkm-o-ring-38-7mm-bore-45-7mm-outer-diameter-1-bag-of-2

Rs Pro 2556491 Fkm O-Ring, 43.7mm Bore, 50.7mm Outer Diameter (1 Bag of 2)

rs pro 2556491 fkm o-ring, 43.7mm bore, 50.7mm outer diameter (1 bag 2) lubang 43,7mm, luar 50,7mm kantong isi ring o-ring bore 43.7mm, beg gelang 形圈，43.7 毫米内径，50.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556491-fkm-o-ring-43-7mm-bore-50-7mm-outer-diameter-1-bag-of-2

Rs Pro 1965657 Fkm O-Ring, 7mm Bore, 10mm Outer Diameter (1 Bag of 25)

rs pro 1965657 fkm o-ring, 7mm bore, 10mm outer diameter (1 bag 25) lubang 7mm, luar kantong isi ring o-ring bore beg gelang 型圈，7 毫米内径，10 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-1965657-fkm-o-ring-7mm-bore-10mm-outer-diameter-1-bag-of-25

Material :  Viton Fluoroelastomers (FKM) 75 Shore    

Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.

This is because due to it wide ranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).  

In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings.  

The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.

Overview on Application Rating for Material Viton (FKM)

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.

O-Rings and rubber seals are generally used for:

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

Covering 	and lubricating the threading of the shaft 

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING ID 45 x CS 5.3 Material : Viton Fluoroelastomers (FKM) 75 Shore Additional InformationFluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.This is because due to it wide ranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15&#x60;C to 199&#x60;C). In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.Temperature Range (Dry Heat)Low: -5&#x60;F / -15&#x60;C High: 390&#x60;F / 199&#x60;COverview on Application Rating for Material Viton (FKM)Properties (Rating)Oils &amp; Grease - ExcellentTear Strength – GoodFuel Resistance - GoodHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - GoodAmmonia, Amines, Alkalis - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.Primary UsageO-Rings and rubber seals are generally used for:<ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships</li><li>F1 Cars</li></ul><li>General Industrial Use </li></ul>Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:<ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.<ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.<ul class="md-block-unordered-list-item"><li>Even stretching </li></ul>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.<ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.<ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Na7WL348lINCx1AbdCuoKm.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

ORING ID 45 x CS 5.3&nbsp;
Material : Viton Fluoroelastomers (FKM) 75 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;<ins>Additional Information</ins>
Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.
This is because due to it wide ranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).&nbsp;&nbsp;
In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings.&nbsp;&nbsp;
The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.
<ins>Temperature Range (Dry Heat)</ins>
Low: -5`F / -15`C High: 390`F / 199`C
<ins>Overview on Application Rating for Material Viton (FKM)</ins>
Properties (Rating)
Oils &amp; Grease - Excellent
Tear Strength – Good
Fuel Resistance - Good
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Good
Ammonia, Amines, Alkalis - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use 
&nbsp;</li>
</ul>
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
<ul>
<li>Even stretching&nbsp;</li>
</ul>
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:an97d"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Na7WL348lINCx1AbdCuoKm.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="an97d" 
 layout="nodisplay"></amp-image-lightbox>

ORING ID 45 x CS 5.3 Viton Fluoroelastomers (FKM) 75 Shore

oring id 45 cs 5.3 viton fluoroelastomers (fkm) 75 shore fluoroelastomer ring o-ring oem gelang oem/oem代工 氟橡胶 肖氏硬度 o型圈 oem代工

oring-id-45-x-cs-5-3-viton-fluoroelastomers-fkm-75-shore

Rs Pro 1966041 Fkm O-Ring, 145.64mm Bore, 152.7mm Outer Diameter

rs pro 1966041 fkm o-ring, 145.64mm bore, 152.7mm outer diameter luar 145,64mm, 152,7mm ring o-ring bore 145.64mm, gelang 形圈，145.64mm 内径，152.7mm 外径 o型圈 rs专业版

rs-pro-1966041-fkm-o-ring-145-64mm-bore-152-7mm-outer-diameter

Rs Pro 2556553 Fkm O-Ring, 32.5mm Bore, 39.7mm Outer Diameter (1 Bag of 5)

rs pro 2556553 fkm o-ring, 32.5mm bore, 39.7mm outer diameter (1 bag 5) lubang 32,5mm, luar 39,7mm kantong isi ring o-ring bore 32.5mm, beg gelang 形圈，32.5 毫米内径，39.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556553-fkm-o-ring-32-5mm-bore-39-7mm-outer-diameter-1-bag-of-5

Rs Pro 1965621 Fkm O-Ring, 7mm Bore, 9mm Outer Diameter (1 Bag of 25)

rs pro 1965621 fkm o-ring, 7mm bore, 9mm outer diameter (1 bag 25) lubang 7mm, luar kantong isi ring o-ring bore beg gelang 型圈，7 毫米内径，9 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-1965621-fkm-o-ring-7mm-bore-9mm-outer-diameter-1-bag-of-25

Rs Pro 1965808 Fkm O-Ring, 7mm Bore, 13mm Outer Diameter (1 Bag of 25)

rs pro 1965808 fkm o-ring, 7mm bore, 13mm outer diameter (1 bag 25) lubang 7mm, luar kantong isi ring o-ring bore beg gelang 型圈，7 毫米内径，13 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-1965808-fkm-o-ring-7mm-bore-13mm-outer-diameter-1-bag-of-25

Rs Pro 1965698 Fkm O-Ring, 7mm Bore, 11mm Outer Diameter (1 Bag of 25)

rs pro 1965698 fkm o-ring, 7mm bore, 11mm outer diameter (1 bag 25) lubang 7mm, luar kantong isi ring o-ring bor beg gelang 型圈，7 毫米内径，11 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-1965698-fkm-o-ring-7mm-bore-11mm-outer-diameter-1-bag-of-25

Rs Pro 2556544 Fkm O-Ring, 27.3mm Bore, 32.7mm Outer Diameter (1 Bag of 5)

rs pro 2556544 fkm o-ring, 27.3mm bore, 32.7mm outer diameter (1 bag 5) lubang 27,3mm, luar 32,7mm kantong isi ring o-ring bore 27.3mm, beg gelang 形圈，27.3 毫米内径，32.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556544-fkm-o-ring-27-3mm-bore-32-7mm-outer-diameter-1-bag-of-5

Rs Pro 2557566 Fkm O-Ring, 26.7mm Bore, 30.26mm Outer Diameter (1 Bag of 20)

rs pro 2557566 fkm o-ring, 26.7mm bore, 30.26mm outer diameter (1 bag 20) lubang 26,7mm, luar 30,26mm kantong isi ring o-ring bore 26.7mm, beg gelang 型圈，26.7 毫米内径，30.26 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2557566-fkm-o-ring-26-7mm-bore-30-26mm-outer-diameter-1-bag-of-20

Rs Pro 2556496 Fkm O-Ring, 44.3mm Bore, 55.7mm Outer Diameter (1 Bag of 2)

rs pro 2556496 fkm o-ring, 44.3mm bore, 55.7mm outer diameter (1 bag 2) lubang 44,3mm, luar 55,7mm kantong isi ring o-ring bore 44.3mm, beg gelang 型圈，44.3 毫米内径，55.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556496-fkm-o-ring-44-3mm-bore-55-7mm-outer-diameter-1-bag-of-2

Rs Pro 2556515 Fkm O-Ring, 4.9mm Bore, 8.7mm Outer Diameter (1 Bag of 50)

rs pro 2556515 fkm o-ring, 4.9mm bore, 8.7mm outer diameter (1 bag 50) lubang 4,9mm, luar 8,7mm kantong isi ring o-ring bore 4.9mm, beg gelang 型圈，4.9 毫米内径，8.7 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-2556515-fkm-o-ring-4-9mm-bore-8-7mm-outer-diameter-1-bag-of-50

Rs Pro 2556191 Fkm O-Ring, 7mm Bore, 12mm Outer Diameter (1 Bag of 25)

rs pro 2556191 fkm o-ring, 7mm bore, 12mm outer diameter (1 bag 25) lubang 7mm, luar kantong isi ring o-ring bor beg gelang 型圈，7 毫米内径，12 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-2556191-fkm-o-ring-7mm-bore-12mm-outer-diameter-1-bag-of-25

Rs Pro 2556212 Fkm O-Ring, 54.3mm Bore, 65.7mm Outer Diameter (1 Bag of 2)

rs pro 2556212 fkm o-ring, 54.3mm bore, 65.7mm outer diameter (1 bag 2) lubang 54,3mm, luar 65,7mm kantong isi ring o-ring bore 54.3mm, beg gelang 型圈，54.3 毫米内径，65.7 毫米外径（1 个） o型圈 rs专业版

rs-pro-2556212-fkm-o-ring-54-3mm-bore-65-7mm-outer-diameter-1-bag-of-2

Rs Pro 2563964 Fkm O-Ring, 145.64mm Bore, 152.7mm Outer Diameter (1 Bag of 2)

rs pro 2563964 fkm o-ring, 145.64mm bore, 152.7mm outer diameter (1 bag 2) lubang 145,64mm, luar 152,7mm kantong berisi ring o-ring bore 145.64mm, beg gelang 型圈，145.64mm 内径，152.7mm 外径（1 个） o型圈 rs专业版

rs-pro-2563964-fkm-o-ring-145-64mm-bore-152-7mm-outer-diameter-1-bag-of-2

Rs Pro 2563969 Fkm O-Ring, 17.46mm Bore, 22.7mm Outer Diameter (1 Bag of 20)

rs pro 2563969 fkm o-ring, 17.46mm bore, 22.7mm outer diameter (1 bag 20) lubang 17,46mm, luar 22,7mm kantong isi ring o-ring bore 17.46mm, beg gelang 型圈，17.46 毫米内径，22.7 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2563969-fkm-o-ring-17-46mm-bore-22-7mm-outer-diameter-1-bag-of-20

O-Ring Replacement Cord - FKM Fluoroelastomers

The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.

The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.

Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.

<h3 class="md-block-header-three">FKM Fluoroelastomers Oring Cord 7mm</h3>O-Ring Replacement Cord - FKM FluoroelastomersThe O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.<h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>Can be used in O-Ring kits</li><li>Available in various diameters</li></ul><h3 class="md-block-header-three">Product Application Information:</h3><ul class="md-block-unordered-list-item"><li>The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.</li></ul><h3 class="md-block-header-three">Specifications:</h3>Attribute ValueMaterial FKM FluoroelastomersDiameter 7 mmFluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.

<h3>FKM Fluoroelastomers Oring Cord 7mm</h3>
O-Ring Replacement Cord - FKM Fluoroelastomers
The O-Ring is a simple, versatile and economical device with a vast range of uses. The most common of these uses is a static seal replacing a gasket or sealing washer. O-Rings can also be used as a single or double acting dynamic seal. It can be used to seal both radially and axially.
<h3>Features and Benefits:</h3>
<ul>
<li>Can be used in O-Ring kits</li>
<li>Available in various diameters</li>
</ul>
<h3>Product Application Information:</h3>
<ul>
<li>The O-Ring is ideal for sealing a multitude of simple and complex applications and can deal with both gaseous and liquid media.</li>
</ul>
<h3>Specifications:</h3>
Attribute Value
Material FKM Fluoroelastomers
Diameter 7 mm
Fluorocarbon elastomers are highly fluorinated carbon-based polymers used in applications to resist harsh chemical and ozone attack. The working temperature range is considered to be -26°C to +205°/230°C (-15°F to +400°/440°F). For short working periods it will take even higher temperatures.

Fkm Fluoroelastomers Oring Cord 7mm

fkm fluoroelastomers oring cord 7mm fluoroelastomer ring o-ring oem gelang oem/oem代工 fkm氟弹性体皮绳7mm o型圈 oem代工

fkm-fluoroelastomers-oring-cord-7mm

Rs Pro 2557601 Fkm O-Ring, 18.64mm Bore, 25.7mm Outer Diameter (1 Bag of 5)

rs pro 2557601 fkm o-ring, 18.64mm bore, 25.7mm outer diameter (1 bag 5) lubang 18,64mm, luar 25,7mm kantong isi ring o-ring bore 18.64mm, beg gelang 型圈，18.64mm 内径，25.7mm 外径（1 个） o型圈 rs专业版

rs-pro-2557601-fkm-o-ring-18-64mm-bore-25-7mm-outer-diameter-1-bag-of-5

Rs Pro 2557574 Fkm O-Ring, 53.7mm Bore, 57.26mm Outer Diameter (1 Bag of 5)

rs pro 2557574 fkm o-ring, 53.7mm bore, 57.26mm outer diameter (1 bag 5) lubang 53,7mm, luar 57,26mm kantong isi ring o-ring bore 53.7mm, beg gelang 型圈，53.7mm 内径，57.26mm 外径（1 个） o型圈 rs专业版

rs-pro-2557574-fkm-o-ring-53-7mm-bore-57-26mm-outer-diameter-1-bag-of-5

Oring / Viton ID633.48mm x THK 7mm

Oring / Viton ID633.48mm x THK 7mm