RS Pro

Schmersal

SCHNEIDER ELECTRIC

UbiBot

Electricals

electricals

Alarm and Doorbells

alarm-and-doorbells

Button Switch

button-switch

Contactor Accessories

contactor-accessories

Control Relays

control-relays

Mechanical Power Transmissions

mechanical-power-transmissions

Linear Actuator Controllers

linear-actuator-controllers

Overload Relays

overload-relays

Power Relay

power-relay

Electrical Switches

electrical-switches

RF Switches

rf-switches

Safety Switch

safety-switch

Switch Socket Outlet

switch-socket-outlet

Test & Measurement

test-measurement

Temperature Data Logger

temperature-data-logger

Pager System for Wireless Calling System with 10 /20 / 30 / 100 Coaster Pagers for Restaurants etc. 

Connect the power adaptor to the power supply to charge the pagers for 10-20 minutes, then you can do the Pagers ID Pair.

Press the Pager's Function Button (take down the plastic cover and AD card paper, you will see the buttons) at center and Cancel button at the flank at the same time, then the 2 red indicator lights on the right side will be on, thus the pager enters the lD pair mode. Then input the corresponding matching lD number and Press the Call button on the keypad of transmitter, the pager will vibrate and beep, which means they have paired successfully. If you input the wrong number, just press the Delete button on keypad to delete the wrong number and input again.

Every time you press the Function button, are indicator light will be lighted on, and every 12 seconds of the prompting time will be lengthen. It can be lengthen to 60 seconds at most. When all indicator lights went out, pager’s prompting time is 60 seconds, and the beep mode (sounds mode) will be turned off only vibration mode is left.

Press the Function button for several seconds, the pager will be powered off with vibration and indicator lights will go out. Then put it back to the corresponding charges lot.

AlsoyoucanpresstheFunctionkeyshortlytoturnthepageron."Onenumber" to turn off all receivers: In put the 99 on the keypad of transmitter and press the Call button, then all receivers will be powered off. Also, you can reconnect the device to the power supply to turn on all pagers again.

5.Delete the Paired ID Number and Re-Pair 

Follow the instructions of “Pagers lD Pair" to pair the pagers number again, the new lD number will cover the registered one automatically.

6.Reset the Transmitter (keypad) lD of JT-912 

Keep pressing the “Call" key of keypad and reboot your system. The screen will flicker, then input a new lD and just press "Call” key again to save, the new lD will auto cover the previous one. You can set a same lD number to 2transmitters or more to let one pager could pair and work with Mult-transmitters at same time.

Note:*All pagers lD also need to re-pair after you reset the transmitter ID.”

1. Delivery can be expedited with additional freight cost

2. Stock availability/ Actual order lead time will be rechecked once confirm order

3. We do not accept returns or exchanges for indent item unless product quality issue

4. Picture shown is for illustration only, actual product may differ

5. This image is representative of the product range, actual product may differ

6. Product may vary slightly from image representation

7. Please allow 1-3mm error due to manual measurement

8. Stock availability subject to prior sales

Pager System for Wireless Calling System with 10 /20 / 30 / 100 Coaster Pagers for Restaurants etc. (Customization Logo)TRANSMITTERDIMENSION: 235*158+36mmMATERIAL: ABSTRANSMIT POWER: 480mWSTANDBY POWER: 650mWMAXIMUM POWER: 18WFREQUENCY: 315MHzPOWER SUPPLY: DC12V/2ALAUNCH DISTANCE: 50~100M OPEN AREAIP GRADE: IP32RECEIVERDIMENSION: 103*51*10mmMATERIAL: ABSRECEIVING SENSITIVITY: -114dBSTANDBY POWER: 148mWLI-POLYMER: 3.7V/150mAhFREQUENCY: 315MHzRECEIVING DISTANCE: 50~100M OPEN AREASTANDBY TIME: ≈ 6HOURPROMPT MODE: VIBRATION BEEP FLASHINGIP GRADE: IP321.Open the packageConnect the power adaptor to the power supply to charge the pagers for 10-20 minutes, then you can do the Pagers ID Pair.2.PagerslDPairPress the Pager&#x27;s Function Button (take down the plastic cover and AD card paper, you will see the buttons) at center and Cancel button at the flank at the same time, then the 2 red indicator lights on the right side will be on, thus the pager enters the lD pair mode. Then input the corresponding matching lD number and Press the Call button on the keypad of transmitter, the pager will vibrate and beep, which means they have paired successfully. If you input the wrong number, just press the Delete button on keypad to delete the wrong number and input again.3.Pager Prompting Time LengthEvery time you press the Function button, are indicator light will be lighted on, and every 12 seconds of the prompting time will be lengthen. It can be lengthen to 60 seconds at most. When all indicator lights went out, pager’s prompting time is 60 seconds, and the beep mode (sounds mode) will be turned off only vibration mode is left.4.TurnOn-0ffPress the Function button for several seconds, the pager will be powered off with vibration and indicator lights will go out. Then put it back to the corresponding charges lot.AlsoyoucanpresstheFunctionkeyshortlytoturnthepageron.&quot;Onenumber&quot; to turn off all receivers: In put the 99 on the keypad of transmitter and press the Call button, then all receivers will be powered off. Also, you can reconnect the device to the power supply to turn on all pagers again.5.Delete the Paired ID Number and Re-Pair Follow the instructions of “Pagers lD Pair&quot; to pair the pagers number again, the new lD number will cover the registered one automatically.6.Reset the Transmitter (keypad) lD of JT-912 Keep pressing the “Call&quot; key of keypad and reboot your system. The screen will flicker, then input a new lD and just press &quot;Call” key again to save, the new lD will auto cover the previous one. You can set a same lD number to 2transmitters or more to let one pager could pair and work with Mult-transmitters at same time.Note:*All pagers lD also need to re-pair after you reset the transmitter ID.” Note: 1. Delivery can be expedited with additional freight cost2. Stock availability/ Actual order lead time will be rechecked once confirm order3. We do not accept returns or exchanges for indent item unless product quality issue4. Picture shown is for illustration only, actual product may differ5. This image is representative of the product range, actual product may differ6. Product may vary slightly from image representation7. Please allow 1-3mm error due to manual measurement8. Stock availability subject to prior sales

Pager System for Wireless Calling System with 10 /20 / 30 / 100 Coaster Pagers for Restaurants etc.&nbsp;
(Customization Logo)
TRANSMITTER
DIMENSION: 235*158+36mm
MATERIAL: ABS
TRANSMIT POWER: 480mW
STANDBY POWER: 650mW
MAXIMUM POWER: 18W
FREQUENCY: 315MHz
POWER SUPPLY: DC12V/2A
LAUNCH DISTANCE: 50~100M OPEN AREA
IP GRADE: IP32
RECEIVER
DIMENSION: 103*51*10mm
MATERIAL: ABS
RECEIVING SENSITIVITY: -114dB
STANDBY POWER: 148mW
LI-POLYMER: 3.7V/150mAh
FREQUENCY: 315MHz
RECEIVING DISTANCE: 50~100M OPEN AREA
STANDBY TIME: ≈ 6HOUR
PROMPT MODE: VIBRATION BEEP FLASHING
IP GRADE: IP32
1.Open the package
Connect the power adaptor to the power supply to charge the pagers for 10-20 minutes, then you can do the Pagers ID Pair.
2.PagerslDPair
Press the Pager's Function Button (take down the plastic cover and AD card paper, you will see the buttons) at center and Cancel button at the flank at the same time, then the 2 red indicator lights on the right side will be on, thus the pager enters the lD pair mode. Then input the corresponding matching lD number and Press the Call button on the keypad of transmitter, the pager will vibrate and beep, which means they have paired successfully. If you input the wrong number, just press the Delete button on keypad to delete the wrong number and input again.
3.Pager Prompting Time Length
Every time you press the Function button, are indicator light will be lighted on, and every 12 seconds of the prompting time will be lengthen. It can be lengthen to 60 seconds at most. When all indicator lights went out, pager’s prompting time is 60 seconds, and the beep mode (sounds mode) will be turned off only vibration mode is left.
4.TurnOn-0ff
Press the Function button for several seconds, the pager will be powered off with vibration and indicator lights will go out. Then put it back to the corresponding charges lot.
AlsoyoucanpresstheFunctionkeyshortlytoturnthepageron."Onenumber" to turn off all receivers: In put the 99 on the keypad of transmitter and press the Call button, then all receivers will be powered off. Also, you can reconnect the device to the power supply to turn on all pagers again.
5.Delete the Paired ID Number and Re-Pair&nbsp;
Follow the instructions of “Pagers lD Pair" to pair the pagers number again, the new lD number will cover the registered one automatically.
6.Reset the Transmitter (keypad) lD of JT-912&nbsp;
Keep pressing the “Call" key of keypad and reboot your system. The screen will flicker, then input a new lD and just press "Call” key again to save, the new lD will auto cover the previous one. You can set a same lD number to 2transmitters or more to let one pager could pair and work with Mult-transmitters at same time.
Note:*All pagers lD also need to re-pair after you reset the transmitter ID.”
&nbsp;
Note:&nbsp;
1. Delivery can be expedited with additional freight cost
2. Stock availability/ Actual order lead time will be rechecked once confirm order
3. We do not accept returns or exchanges for indent item unless product quality issue
4. Picture shown is for illustration only, actual product may differ
5. This image is representative of the product range, actual product may differ
6. Product may vary slightly from image representation
7. Please allow 1-3mm error due to manual measurement
8. Stock availability subject to prior sales

Instruction

Prolockey

NANHUA

Eezee Pro

Iflytek

Nitto

Remax

SAIRUI

Guo Mao

Padlocks & Lockout Devices

Padlocks & Lockout Station

Toolbags

Lockout Tags

Safe Box & Safe Chest

Safety Cone

Cable Protectors

Pedal Bins

Desk stationery

 Samuel Wang

Pager System for Wireless Calling System With 10/20/30/100 Coaster Pagers for Restaurants Etc. ((customization Logo)

pager system wireless calling 10/20/30/100 coaster pagers restaurants etc. ((customization logo) sistem untuk panggilan nirkabel dengan restoran dll. ((logo kustomisasi) alarm doorbells dan bel pintu oem tanpa wayar penyesuaian) penggera loceng 无线呼叫系统的寻呼机系统，配有 寻呼机，适用于餐厅等（（定制徽标） 警报和门铃 oem代工

pager-system-for-wireless-calling-system-with-10-20-30-100-coaster-pagers-for-restaurants-etc-customization-logo

10 Pagers

20 Pagers

30 Pagers

100 Pagers

Pagers

SCHMERSAL AZM 300 Series Interlock Switch with Base
come with 
AZM300Z-ST-1P2P
AZ/AZM300-B1

Product Features.

RFID technology for needs-based protection against tampering

SCHMERSAL AZM 300 Series Interlock Switch with Base come with AZM300Z-ST-1P2P AZ/AZM300-B1 Product Features.<ul class="md-block-unordered-list-item"><li>Universal coding with RFID technology</li><li>Connector M12, 8-pole</li><li>Power to unlock</li><li>Guard locking monitored</li><li>Diagnostic output</li><li>hygienic design</li><li>Protection class IP 69</li><li>Suitable for mounting to profile systems</li><li>Thermoplastic enclosure</li><li>RFID technology for needs-based protection against tampering</li><li>3 different directions of actuation</li><li>Compact design</li><li>3 LEDs to show operating conditions</li><li>Suitable for hinged and sliding guards</li><li>Series-wiring</li><li>Manual release</li><li>3 different directions of actuation</li></ul>

SCHMERSAL AZM 300 Series Interlock Switch with Base 
come with 
AZM300Z-ST-1P2P 
AZ/AZM300-B1 
 
Product Features.
<ul>
<li>Universal coding with RFID technology</li>
<li>Connector M12, 8-pole</li>
<li>Power to unlock</li>
<li>Guard locking monitored</li>
<li>Diagnostic output</li>
<li>hygienic design</li>
<li>Protection class IP 69</li>
<li>Suitable for mounting to profile systems</li>
<li>Thermoplastic enclosure</li>
<li>RFID technology for needs-based protection against tampering</li>
<li>3 different directions of actuation</li>
<li>Compact design</li>
<li>3 LEDs to show operating conditions</li>
<li>Suitable for hinged and sliding guards</li>
<li>Series-wiring</li>
<li>Manual release</li>
<li>3 different directions of actuation</li>
</ul>

Eddie Yip

Others

PELCO

PLANET

Siemens

ORing

Moxa

AXIS

Flir

Siqura

TIEFENBACH

Security Cameras

Networking Products

Network Switches

Contact Block

Led Lights

Lifting Slings

DC-DC Converters

Vehicle Accessories

Proximity switches

Fiber-Optic Cable 

Eddie Yip 

buyerIntroduction

Schmersal AZM300 Series Interlock Switch With Base

schmersal azm300 series interlock switch base saklar seri dengan basis safety pengaman suis siri tapak keselamatan schmersal/施默萨尔 施迈赛 系列带底座联锁开关 安全开关 施默萨尔

schmersal-azm300-series-interlock-switch-with-base

Schneider Electric Thermal Overload Relays, Tesys Deca, 110...140A, Class 10A, Lug Clamps LRD4369

TeSys LRD thermal overload relay, 140A/1000V, thermal setting range 110-140A, tripping class 10A, for protection of 3-phase motors 75kW@400V. Differential device with phase failure (loss). It provides a thermal adjustement dial, a manual-automatic reset selector acting also as reset button, a trip test button for simulation of a tripping, a stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D150. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LA7D3064 (to be ordered separately). Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D150.                  

<h3 class="md-block-header-three">Schneider Electric Thermal Overload Relays, Tesys Deca, 110...140A, Class 10A, Lug Clamps LRD4369</h3>TeSys LRD thermal overload relay, 140A/1000V, thermal setting range 110-140A, tripping class 10A, for protection of 3-phase motors 75kW@400V. Differential device with phase failure (loss). It provides a thermal adjustement dial, a manual-automatic reset selector acting also as reset button, a trip test button for simulation of a tripping, a stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D150. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LA7D3064 (to be ordered separately). Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D150.

<h3>Schneider Electric Thermal Overload Relays, Tesys Deca, 110...140A, Class 10A, Lug Clamps LRD4369</h3>
TeSys LRD thermal overload relay, 140A/1000V, thermal setting range 110-140A, tripping class 10A, for protection of 3-phase motors 75kW@400V. Differential device with phase failure (loss). It provides a thermal adjustement dial, a manual-automatic reset selector acting also as reset button, a trip test button for simulation of a tripping, a stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D150. Mounting on DIN rail or screw fixing, separated from the contactor, with use of a terminal block LA7D3064 (to be ordered separately). Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1D150.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

LRD4369

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

schneider electric thermal overload relays, tesys deca, 110...140a, class 10a, lug clamps lrd4369 relay, kelas klem power relay relai daya geganti muatan terma elektrik schneider, pengapit electric/施耐德电气 热过载继电器，tesys deca，110...140a，10a 级，接线夹 功率继电器 施耐德电气

schneider-electric-thermal-overload-relays-tesys-deca-110-140a-class-10a-lug-clamps-lrd4369

SCHNEIDER ELECTRIC e-stop Rope Pull Switch XY2CH - 1NC+1NO - Booted Pushbutton XY2CH13250

 This XY2CH Emergency Stop Rope pull Switch is designed with a right hand side or a left hand side anchor point, allowing operator to trigger the stop of potentially dangerous machines at any point of its working area. It operates with a maximum rope length of 30 meters. It has a Zamak body with a booted pushbutton reset, Chloroprene bellows, no pilot light, and 1 normally open and 1 normally closed slow break contacts. Its B10D reliability data is 4 000 000. This emergency stop rope pull switch is suitable for woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc. Its IP65 degree of protection makes it ideal for heavy duty use in harsh conditions. It also complies with EN/IEC 60204-1, EN/IEC 60947-5-1, EN/IEC 60947-5-5, EN/ISO 13850, UL NISD, CSA C22.2 No 14-13 standards. When associated and correctly connected to an appropriate safety control unit, it conforms to category 4, performance level PL e, SIL 3 as described in EN/ISO 13849-1, EN/IEC 61508. 

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC e-stop Rope Pull Switch XY2CH - 1NC+1NO - Booted Pushbutton XY2CH13250</h3><ul class="md-block-unordered-list-item"><li> This XY2CH Emergency Stop Rope pull Switch is designed with a right hand side or a left hand side anchor point, allowing operator to trigger the stop of potentially dangerous machines at any point of its working area. It operates with a maximum rope length of 30 meters. It has a Zamak body with a booted pushbutton reset, Chloroprene bellows, no pilot light, and 1 normally open and 1 normally closed slow break contacts. Its B10D reliability data is 4 000 000. This emergency stop rope pull switch is suitable for woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc. Its IP65 degree of protection makes it ideal for heavy duty use in harsh conditions. It also complies with EN/IEC 60204-1, EN/IEC 60947-5-1, EN/IEC 60947-5-5, EN/ISO 13850, UL NISD, CSA C22.2 No 14-13 standards. When associated and correctly connected to an appropriate safety control unit, it conforms to category 4, performance level PL e, SIL 3 as described in EN/ISO 13849-1, EN/IEC 61508. </li></ul>

<h3>SCHNEIDER ELECTRIC e-stop Rope Pull Switch XY2CH - 1NC+1NO - Booted Pushbutton XY2CH13250</h3>
<ul>
<li>&nbsp;This XY2CH Emergency Stop Rope pull Switch is designed with a right hand side or a left hand side anchor point, allowing operator to trigger the stop of potentially dangerous machines at any point of its working area. It operates with a maximum rope length of 30 meters. It has a Zamak body with a booted pushbutton reset, Chloroprene bellows, no pilot light, and 1 normally open and 1 normally closed slow break contacts. Its B10D reliability data is 4 000 000. This emergency stop rope pull switch is suitable for woodworking machines, shears, conveyor systems, printing machines, textile machines, rolling mills, test laboratories, paint shops, surface treatment works, etc. Its IP65 degree of protection makes it ideal for heavy duty use in harsh conditions. It also complies with EN/IEC 60204-1, EN/IEC 60947-5-1, EN/IEC 60947-5-5, EN/ISO 13850, UL NISD, CSA C22.2 No 14-13 standards. When associated and correctly connected to an appropriate safety control unit, it conforms to category 4, performance level PL e, SIL 3 as described in EN/ISO 13849-1, EN/IEC 61508.&nbsp;</li>
</ul>

spec sheet (XY2CH13250)

Schneider Electric e-stop Rope Pull Switch XY2CH - 1NC+1NO - Booted Pushbutton XY2CH13250

schneider electric e-stop rope pull switch xy2ch 1nc+1no booted pushbutton xy2ch13250 sakelar tarik tali tombol tekan boot safety saklar pengaman suis e-henti elektrik butang keselamatan electric/施耐德电气 急停拉绳开关 带启动按钮 安全开关 施耐德电气

schneider-electric-e-stop-rope-pull-switch-xy2ch-1nc-1no-booted-pushbutton-xy2ch13250

Light Switches

Miniature Circuit Breakers - MCBs

Pilot Lights

EasyPact Circuit Breakers 

Electromechanical Interface Relays

Tricia

schneider electric thermal overload relays, tesys deca, 110...140a, class 10a, lug clamps lrd4369 relay, kelas klem relays geganti muatan terma elektrik schneider, pengapit electric/施耐德电气 热过载继电器，tesys deca，110...140a，10a 级，接线夹 施耐德电气

Abb CRS213 Switch Socket 13A 2G Dp 30MA Rcd

Contact status indicator - red flag incorporated in reset button

Operating voltage / frequency - 230V + 15% - 10% / ~50Hz

Trip speed - not more than 40ms at 5 times rated tripping current

Reversed polarity (supply) - RCD protection

<h3 class="md-block-header-three">Abb CRS213 Switch Socket 13A 2G Dp 30MA Rcd</h3> <ul class="md-block-unordered-list-item"><li>Standard - BS 7288</li><li>Contact status indicator - red flag incorporated in reset button</li><li>Operating voltage / frequency - 230V + 15% - 10% / ~50Hz</li><li>Load current - 13A resistive</li><li>RCD trip current - 30mA nominal</li><li>Trip speed - not more than 40ms at 5 times rated tripping current</li><li>Circuit fault breaking capacity - 1500A</li><li>Built-in test button</li><li>Continue to protect - RCD protection</li><li>Loss of supply earth - RCD protection</li><li>Reversed polarity (supply) - RCD protection</li><li>Earth leakage within range - trip</li><li>Unit of Measurement : PCS</li></ul>

<h3>Abb CRS213 Switch Socket 13A 2G Dp 30MA Rcd</h3>
&nbsp;&nbsp;
<ul>
<li>Standard - BS 7288</li>
<li>Contact status indicator - red flag incorporated in reset button</li>
<li>Operating voltage / frequency - 230V + 15% - 10% / ~50Hz</li>
<li>Load current - 13A resistive</li>
<li>RCD trip current - 30mA nominal</li>
<li>Trip speed - not more than 40ms at 5 times rated tripping current</li>
<li>Circuit fault breaking capacity - 1500A</li>
<li>Built-in test button</li>
<li>Continue to protect - RCD protection</li>
<li>Loss of supply earth - RCD protection</li>
<li>Reversed polarity (supply) - RCD protection</li>
<li>Earth leakage within range - trip</li>
<li>Unit of Measurement : PCS</li>
</ul>

abb crs213 switch socket 13a 2g dp 30ma rcd saklar soket outlet suis 开关插座

abb-crs213-switch-socket-13a-2g-dp-30ma-rcd

UbiBot
The Smartest Multi-Sensor IoT Device
with LCD Display 
2.4GHz WIFI Version
~ Temperature, Humidity & Light Level ~ 
(Model No.: WS1-Pro-WIFI)

WiFi only model:  The device can only connect to 2.4GHz WiFi router network. 5GHz WiFi is NOT supported. 

The UbiBot ® WS1 Pro is a state-of-the-art environmental monitoring system that leverages the latest IoT technologies. Collect environmental data in real-time and automatically sync all the data to the UbiBot ®IoT Platform using WiFi. The clear 4.4’’ screen allows you to instantly view the latest data. You can also access your device readings in real-time via our App or using a browser anywhere in the world. The embedded RS485 interface ensures your use of external probe in the most extreme conditions.

Our cloud-based IoT platform offers advanced data analysis and management. It also allows you to setup real-time notifications - if a metric goes outside the range you specify, the platform will notify you through the app, by email, SMS text, voice call and HTTP, allowing you to respond promptly before costly damage happens. Please note, charges may apply to SMS text and voice call alert modes. These two modes cost the balance of the credits in your account. The IoT platform gives users access to both the real-time data and history via our mobile app or on any browser. We are now working with IFTTT (if this then that), allowing you to build custom link with other smart devices.

The device can store over 300,000 records in its internal memory, which can protect your data against network failure. Even if the network fails, the UbiBot WS1 Pro still stores readings, thus ensuring there are no gaps in the data history.

The data sync interval can be set by you. This allows you to balance battery life against frequency of data capture. With the default data sync interval of 15 minutes, using WiFi connection, the device has a battery life of up to 4- 6 months using 4 AA alkaline batteries.

- UbiBot WS1 Pro has two Micro USB ports for connecting external probes or USB power-supply.  
- Both Micro USB ports can be used for external DS18B20 temperature probe. Temperature range (-55 to 125 ℃) with 3 or 5 meters round cable.
- One of Micro USB ports can be used for RS485 temperature and humidity probe. 
- We recommend to buy Micro USB Splitter Cable Adapter (One Male to Two Female) if you want to use external USB power-supply and two external probes at the same time.

Please note, when the TH30S-B probe connected with our WS1 Pro device, only temperature readings can be displayed on the screen.

Instant data visualization via LCD screen

Online real-time detecting temperature, humidity and light level

WiFi Specifications: 2.4GHz, channels 1-13 (5GHz WiFi NOT supported)

External Probe: Supports DS18B20 probe (optional extra)

Power Source: 4 x AA batteries / Micro USB (5V/2A)

*The quoted battery life was tested using VARTA industrial batteries under stable signal conditions with default synchronisation and sampling settings.

1. Does the device collect data when the network is unavailable?
Yes. The device continues to monitor the environment even when no network is available. It stores the data in its on-device memory and will sync it when you move it to WiFi environment. Alternatively, you can manually export the data via our PC Offline Tool or WiFi AP.

2. How to reset the device when my WiFi router password is changed?
Repeat the device setup steps and follow the on-screen instructions. Note: you need to type in the new WiFi password. All your data are kept unchanged when you changed the WiFi password or even you move the device to a new location.

3.What kind of probe can be connected with the device?
The WS1 Pro supports 2 x DS18B20 temperature probe. The embedded RS485 interface allows soil temperature & humidity probe as well as environment temperature & humidity probe to be connected.

4.Is there any subscription fee for using the platform?
There is no need of subscription to use the UbiBot Platform.

Each device comes with the free plan on UbiBot platform that offers 200MB storage and 1GB outbound traffic. The 200MB storage is for lifetime and 1GB of outbound traffic is rotated monthly for each device. But any balance of the outbound traffic will not roll over to the next month. For example, if you have 500 MB outbound traffic unused this month, you still have 1 GB next month.

The free 200MB storage is enough to store over 2 years amount of data in case of your device takes temperature, humidity and light sensor readings every 10 minutes.

5. How long will the batteries last?
With the default sync interval of 15 minutes, the device has a battery life of up to 4-6 months using 4 AA alkaline batteries. According to our test, the VARTA industrial batteries are recommended for better performance.

<h1 class="md-block-header-one">UbiBot The Smartest Multi-Sensor IoT Device with LCD Display 2.4GHz WIFI Version ~ Temperature, Humidity &amp; Light Level ~ (Model No.: WS1-Pro-WIFI)</h1>DescriptionsWiFi only model:  The device can only connect to 2.4GHz WiFi router network. 5GHz WiFi is NOT supported. The UbiBot ® WS1 Pro is a state-of-the-art environmental monitoring system that leverages the latest IoT technologies. Collect environmental data in real-time and automatically sync all the data to the UbiBot ®IoT Platform using WiFi. The clear 4.4’’ screen allows you to instantly view the latest data. You can also access your device readings in real-time via our App or using a browser anywhere in the world. The embedded RS485 interface ensures your use of external probe in the most extreme conditions.Our cloud-based IoT platform offers advanced data analysis and management. It also allows you to setup real-time notifications - if a metric goes outside the range you specify, the platform will notify you through the app, by email, SMS text, voice call and HTTP, allowing you to respond promptly before costly damage happens. Please note, charges may apply to SMS text and voice call alert modes. These two modes cost the balance of the credits in your account. The IoT platform gives users access to both the real-time data and history via our mobile app or on any browser. We are now working with IFTTT (if this then that), allowing you to build custom link with other smart devices.The device can store over 300,000 records in its internal memory, which can protect your data against network failure. Even if the network fails, the UbiBot WS1 Pro still stores readings, thus ensuring there are no gaps in the data history.The data sync interval can be set by you. This allows you to balance battery life against frequency of data capture. With the default data sync interval of 15 minutes, using WiFi connection, the device has a battery life of up to 4- 6 months using 4 AA alkaline batteries.External Probe Selection (Optional): - UbiBot WS1 Pro has two Micro USB ports for connecting external probes or USB power-supply.   - Both Micro USB ports can be used for external DS18B20 temperature probe. Temperature range (-55 to 125 ℃) with 3 or 5 meters round cable. - One of Micro USB ports can be used for RS485 temperature and humidity probe.  - We recommend to buy Micro USB Splitter Cable Adapter (One Male to Two Female) if you want to use external USB power-supply and two external probes at the same time.Please note, when the TH30S-B probe connected with our WS1 Pro device, only temperature readings can be displayed on the screen.Features<ul class="md-block-unordered-list-item"><li>Free App &amp; email alerts</li><li>Instant data visualization via LCD screen</li><li>Data sync via WiFi connectivity</li><li>24/7 temperature &amp; humidity monitoring</li><li>Battery-powered, place it anywhere</li><li>Easy 3 minute setup</li><li>Customise alert settings</li><li>No hub required </li></ul>Applications<ul class="md-block-unordered-list-item"><li>Online real-time detecting temperature, humidity and light level</li><li>Greenhouse</li><li>Museum</li><li>Wine Cellar</li><li>Pharmacy</li><li>Horticulture</li><li>Animal Breeding Warehouse</li><li>Server Room</li></ul>Specification:<ul class="md-block-unordered-list-item"><li>Temperature</li><ul class="md-block-unordered-list-item"><li>Range: -20℃ to 60℃ (-4℉ to 140℉)</li><li>Accuracy: ±0.3℃</li></ul><li>Humidity</li><ul class="md-block-unordered-list-item"><li>Range: 0% to 100%</li><li>Accuracy: ±3%RH</li></ul><li>Light Level</li><ul class="md-block-unordered-list-item"><li>Range: 0 to 83,000 lux</li><li>Accuracy: ±2%</li></ul><li>Memory: &gt;300,000 sensor records</li><li>WiFi Specifications: 2.4GHz, channels 1-13 (5GHz WiFi NOT supported)</li><li>Screen Size: 10.4 × 5cm (4.4’’)</li><li>Ports: 2 x Micro USB</li><li>External Probe: Supports DS18B20 probe (optional extra)</li><li>Colour: White</li><li>Material: Flame resistant ABS+PC</li><li>Power Source: 4 x AA batteries / Micro USB (5V/2A)</li><li>Battery Life: 4-6 months (WiFi only)*</li><li>Dimensions: 12.6 x 8.6 x 2.25 cm</li><li>Weight: 143g ± 3g</li></ul>*The quoted battery life was tested using VARTA industrial batteries under stable signal conditions with default synchronisation and sampling settings.Package List<ul class="md-block-unordered-list-item"><li>1 x WS1 Pro device</li><li>1 x manual book</li><li>1 x USB cable</li><li>1 x stand</li></ul>FAQ1. Does the device collect data when the network is unavailable? Yes. The device continues to monitor the environment even when no network is available. It stores the data in its on-device memory and will sync it when you move it to WiFi environment. Alternatively, you can manually export the data via our PC Offline Tool or WiFi AP.2. How to reset the device when my WiFi router password is changed? Repeat the device setup steps and follow the on-screen instructions. Note: you need to type in the new WiFi password. All your data are kept unchanged when you changed the WiFi password or even you move the device to a new location.3.What kind of probe can be connected with the device? The WS1 Pro supports 2 x DS18B20 temperature probe. The embedded RS485 interface allows soil temperature &amp; humidity probe as well as environment temperature &amp; humidity probe to be connected.4.Is there any subscription fee for using the platform? There is no need of subscription to use the UbiBot Platform.<ul class="md-block-unordered-list-item"><li>Each device comes with the free plan on UbiBot platform that offers 200MB storage and 1GB outbound traffic. The 200MB storage is for lifetime and 1GB of outbound traffic is rotated monthly for each device. But any balance of the outbound traffic will not roll over to the next month. For example, if you have 500 MB outbound traffic unused this month, you still have 1 GB next month.</li><li>The free 200MB storage is enough to store over 2 years amount of data in case of your device takes temperature, humidity and light sensor readings every 10 minutes.</li></ul>5. How long will the batteries last? With the default sync interval of 15 minutes, the device has a battery life of up to 4-6 months using 4 AA alkaline batteries. According to our test, the VARTA industrial batteries are recommended for better performance.

<h1>UbiBot 
The Smartest Multi-Sensor IoT Device 
with LCD Display 
2.4GHz WIFI Version 
~ Temperature, Humidity &amp; Light Level ~ 
(Model No.: WS1-Pro-WIFI)</h1>
Descriptions
WiFi only model:  The device can only connect to 2.4GHz WiFi router network. 5GHz WiFi is NOT supported. 
The UbiBot ® WS1 Pro is a state-of-the-art environmental monitoring system that leverages the latest IoT technologies. Collect environmental data in real-time and automatically sync all the data to the UbiBot ®IoT Platform using WiFi. The clear 4.4’’ screen allows you to instantly view the latest data. You can also access your device readings in real-time via our App or using a browser anywhere in the world. The embedded RS485 interface ensures your use of external probe in the most extreme conditions.
Our cloud-based IoT platform offers advanced data analysis and management. It also allows you to setup real-time notifications - if a metric goes outside the range you specify, the platform will notify you through the app, by email, SMS text, voice call and HTTP, allowing you to respond promptly before costly damage happens. Please note, charges may apply to SMS text and voice call alert modes. These two modes cost the balance of the credits in your account. The IoT platform gives users access to both the real-time data and history via our mobile app or on any browser. We are now working with IFTTT (if this then that), allowing you to build custom link with other smart devices.
The device can store over 300,000 records in its internal memory, which can protect your data against network failure. Even if the network fails, the UbiBot WS1 Pro still stores readings, thus ensuring there are no gaps in the data history.
The data sync interval can be set by you. This allows you to balance battery life against frequency of data capture. With the default data sync interval of 15 minutes, using WiFi connection, the device has a battery life of up to 4- 6 months using 4 AA alkaline batteries.
External Probe Selection (Optional): 
- UbiBot WS1 Pro has two Micro USB ports for connecting external probes or USB power-supply.   
- Both Micro USB ports can be used for external DS18B20 temperature probe. Temperature range (-55 to 125 ℃) with 3 or 5 meters round cable. 
- One of Micro USB ports can be used for RS485 temperature and humidity probe.  
- We recommend to buy Micro USB Splitter Cable Adapter (One Male to Two Female) if you want to use external USB power-supply and two external probes at the same time.
Please note, when the TH30S-B probe connected with our WS1 Pro device, only temperature readings can be displayed on the screen.
Features
<ul>
<li>Free App &amp; email alerts</li>
<li>Instant data visualization via LCD screen</li>
<li>Data sync via WiFi connectivity</li>
<li>24/7 temperature &amp; humidity monitoring</li>
<li>Battery-powered, place it anywhere</li>
<li>Easy 3 minute setup</li>
<li>Customise alert settings</li>
<li>No hub required </li>
</ul>
Applications
<ul>
<li>Online real-time detecting temperature, humidity and light level</li>
<li>Greenhouse</li>
<li>Museum</li>
<li>Wine Cellar</li>
<li>Pharmacy</li>
<li>Horticulture</li>
<li>Animal Breeding Warehouse</li>
<li>Server Room</li>
</ul>
Specification:
<ul>
<li>Temperature</li>
<ul>
<li>Range: -20℃ to 60℃ (-4℉ to 140℉)</li>
<li>Accuracy: ±0.3℃</li>
</ul>
<li>Humidity</li>
<ul>
<li>Range: 0% to 100%</li>
<li>Accuracy: ±3%RH</li>
</ul>
<li>Light Level</li>
<ul>
<li>Range: 0 to 83,000 lux</li>
<li>Accuracy: ±2%</li>
</ul>
<li>Memory: &gt;300,000 sensor records</li>
<li>WiFi Specifications: 2.4GHz, channels 1-13 (5GHz WiFi NOT supported)</li>
<li>Screen Size: 10.4 × 5cm (4.4’’)</li>
<li>Ports: 2 x Micro USB</li>
<li>External Probe: Supports DS18B20 probe (optional extra)</li>
<li>Colour: White</li>
<li>Material: Flame resistant ABS+PC</li>
<li>Power Source: 4 x AA batteries / Micro USB (5V/2A)</li>
<li>Battery Life: 4-6 months (WiFi only)*</li>
<li>Dimensions: 12.6 x 8.6 x 2.25 cm</li>
<li>Weight: 143g ± 3g</li>
</ul>
*The quoted battery life was tested using VARTA industrial batteries under stable signal conditions with default synchronisation and sampling settings.
Package List
<ul>
<li>1 x WS1 Pro device</li>
<li>1 x manual book</li>
<li>1 x USB cable</li>
<li>1 x stand</li>
</ul>
FAQ
1. Does the device collect data when the network is unavailable? 
Yes. The device continues to monitor the environment even when no network is available. It stores the data in its on-device memory and will sync it when you move it to WiFi environment. Alternatively, you can manually export the data via our PC Offline Tool or WiFi AP.
2. How to reset the device when my WiFi router password is changed? 
Repeat the device setup steps and follow the on-screen instructions. Note: you need to type in the new WiFi password. All your data are kept unchanged when you changed the WiFi password or even you move the device to a new location.
3.What kind of probe can be connected with the device? 
The WS1 Pro supports 2 x DS18B20 temperature probe. The embedded RS485 interface allows soil temperature &amp; humidity probe as well as environment temperature &amp; humidity probe to be connected.
4.Is there any subscription fee for using the platform? 
There is no need of subscription to use the UbiBot Platform.
<ul>
<li>Each device comes with the free plan on UbiBot platform that offers 200MB storage and 1GB outbound traffic. The 200MB storage is for lifetime and 1GB of outbound traffic is rotated monthly for each device. But any balance of the outbound traffic will not roll over to the next month. For example, if you have 500 MB outbound traffic unused this month, you still have 1 GB next month.</li>
<li>The free 200MB storage is enough to store over 2 years amount of data in case of your device takes temperature, humidity and light sensor readings every 10 minutes.</li>
</ul>
5. How long will the batteries last? 
With the default sync interval of 15 minutes, the device has a battery life of up to 4-6 months using 4 AA alkaline batteries. According to our test, the VARTA industrial batteries are recommended for better performance.

Data Sheet

YK Yeo

Ubibot Ws1-pro Wifi Temperature Humidity Light Data Logger Iot System

ubibot ws1-pro wifi temperature humidity light data logger iot system temperatur kelembaban cahaya sistem ubotot suhu kelembapan ubibot/育碧 wifi温度湿度光数据记录仪物联网系统

ubibot-ws1-pro-wifi-temperature-humidity-light-data-logger-iot-system

Schneider Electric LR2K0314 Tesys K - Differential Thermal Overload Relays - 5.5...8 a - Class 10A

TeSys   LRK thermal overload relay, 8A/690V, thermal setting range 5.5-8A, tripping   class 10A, for protection of 3-phase motors 3kW@400V. Differential device   with phase failure and load unbalance detection. It provides a thermal   adjustement dial, a manual-automatic reset selector, a test slide switch for   simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary   contacts 1NO+1NC for fault signalling. Settings are protected by a   transparent cover lockable by sealing. 

Connection by screw clamp terminals,   it connects directly to the bottom terminals of 3-pole contactors LC1K09-K16.   Mounting on DIN rail, separated from the contactor, with use of a terminal   block LA7K0064 (to be ordered separately). Multi standards certified (IEC,   UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).     

<h3 class="md-block-header-three">Schneider Electric LR2K0314 Tesys K - Differential Thermal Overload Relays - 5.5...8 a - Class 10A</h3>TeSys LRK thermal overload relay, 8A/690V, thermal setting range 5.5-8A, tripping class 10A, for protection of 3-phase motors 3kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K09-K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).

<h3>Schneider Electric LR2K0314 Tesys K - Differential Thermal Overload Relays - 5.5...8 a - Class 10A</h3>
TeSys LRK thermal overload relay, 8A/690V, thermal setting range 5.5-8A, tripping class 10A, for protection of 3-phase motors 3kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. 
 
Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K09-K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Multi standards certified (IEC, UL, CSA, CCC, EAC), Green Premium compliant (RoHs/Reach).&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

LR2K0314

schneider electric lr2k0314 tesys differential thermal overload relays 5.5...8 class 10a relai kelebihan beban termal diferensial kelas geganti terma berbeza electric/施耐德电气 差动热过载继电器 施耐德电气

schneider-electric-lr2k0314-tesys-k-differential-thermal-overload-relays-5-5-8-a-class-10a

SCHNEIDER ELECTRIC Differential Thermal Overload Relay, Tesys K, 0.54...0.8A, Class 10A LR2K0305

TeSys LRK thermal overload relay, 0.8A/690V, thermal setting range 0.54-0.8A, tripping class 10A, for protection of 3-phase motors 0.18kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K06-K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K06-K16.                  

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Differential Thermal Overload Relay, Tesys K, 0.54...0.8A, Class 10A LR2K0305</h3>TeSys LRK thermal overload relay, 0.8A/690V, thermal setting range 0.54-0.8A, tripping class 10A, for protection of 3-phase motors 0.18kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K06-K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K06-K16.

<h3>SCHNEIDER ELECTRIC Differential Thermal Overload Relay, Tesys K, 0.54...0.8A, Class 10A LR2K0305</h3>
TeSys LRK thermal overload relay, 0.8A/690V, thermal setting range 0.54-0.8A, tripping class 10A, for protection of 3-phase motors 0.18kW@400V. Differential device with phase failure and load unbalance detection. It provides a thermal adjustement dial, a manual-automatic reset selector, a test slide switch for simulation of a tripping, reset/stop button, a flag indicator and 2 auxiliary contacts 1NO+1NC for fault signalling. Settings are protected by a transparent cover lockable by sealing. Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K06-K16. Mounting on DIN rail, separated from the contactor, with use of a terminal block LA7K0064 (to be ordered separately). Connection by screw clamp terminals, it connects directly to the bottom terminals of 3-pole contactors LC1K06-K16.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

LR2K0305

Schneider Electric LR2K0305 Differential Thermal Overload Relay, Tesys K, 0.54...0.8A, Class 10A

schneider electric lr2k0305 differential thermal overload relay, tesys k, 0.54...0.8a, class 10a relai kelebihan beban termal diferensial, 0,54...0,8a, kelas relays geganti terma berbeza, electric/施耐德电气 差动热过载继电器，tesys k，0.54...0.8a，10a 施耐德电气