Iwata

RS Pro

Electricals

electricals

Heat-Shrinkable Tube

heat-shrinkable-tube

Outdoor & Gardening

outdoor-gardening

Hoses

hoses

Tube and Tubing

tube-and-tubing

Plastic Tubing

plastic-tubing

Fasteners

fasteners

Washers

washers

  Advantage - PVC tubing smooth inner surface is easy to flow and clean. Made of PVC, transparent, smooth, soft, resistant to deformation. The temperature resistance range of the PVC tubing is - 5°C to 60°C, and the withstand pressure does not exceed 0.2 MPa. Light weight, convenient to use.

Feature - Plastic Flexible Hose Measures 4mm inside diameter by 6mm outside diameter by 6.56-feet total length.

Material - PVC Clear Vinyl Tube is made of a clear PVC material that is lightweight and flexible.

Application -PVC tubing is good as air hose,water pipe, oil line, suited for fish tank/aquarium, water supply pipe, oil tubing of low pressure system, etc.

Tips - Pvc transparent tube has a certain plastic taste. Do not use and store in the sun for a long time to prevent aging.

Pictures shown are for illustration purpose only. Actual product may vary

<h3 class="md-block-header-three">Nil GA-4MM Tubing Pvc White 4MMX200MTR</h3><ul class="md-block-unordered-list-item"><li> Advantage - PVC tubing smooth inner surface is easy to flow and clean. Made of PVC, transparent, smooth, soft, resistant to deformation. The temperature resistance range of the PVC tubing is - 5°C to 60°C, and the withstand pressure does not exceed 0.2 MPa. Light weight, convenient to use.</li><li>Feature - Plastic Flexible Hose Measures 4mm inside diameter by 6mm outside diameter by 6.56-feet total length.</li><li>Material - PVC Clear Vinyl Tube is made of a clear PVC material that is lightweight and flexible.</li><li>Application -PVC tubing is good as air hose,water pipe, oil line, suited for fish tank/aquarium, water supply pipe, oil tubing of low pressure system, etc.</li><li>Tips - Pvc transparent tube has a certain plastic taste. Do not use and store in the sun for a long time to prevent aging.</li><li>Unit of Measurement : ROLL </li><li>Pictures shown are for illustration purpose only. Actual product may vary</li></ul>

<h3>Nil GA-4MM Tubing Pvc White 4MMX200MTR</h3>
<ul>
<li>&nbsp;&nbsp;Advantage - PVC tubing smooth inner surface is easy to flow and clean. Made of PVC, transparent, smooth, soft, resistant to deformation. The temperature resistance range of the PVC tubing is - 5°C to 60°C, and the withstand pressure does not exceed 0.2 MPa. Light weight, convenient to use.</li>
<li>Feature - Plastic Flexible Hose Measures 4mm inside diameter by 6mm outside diameter by 6.56-feet total length.</li>
<li>Material - PVC Clear Vinyl Tube is made of a clear PVC material that is lightweight and flexible.</li>
<li>Application -PVC tubing is good as air hose,water pipe, oil line, suited for fish tank/aquarium, water supply pipe, oil tubing of low pressure system, etc.</li>
<li>Tips - Pvc transparent tube has a certain plastic taste. Do not use and store in the sun for a long time to prevent aging.</li>
<li>Unit of Measurement : ROLL&nbsp;&nbsp;</li>
<li>Pictures shown are for illustration purpose only. Actual product may vary</li>
</ul>

Jimmy Foo

SCHNEIDER ELECTRIC

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

Nil GA-4MM Tubing Pvc White 4MMX200MTR (while Stocks Last)

nil ga-4mm tubing pvc white 4mmx200mtr (while stocks last) tabung putih (selama persediaan masih ada) plastic tiada tiub (sementara stok nil/零 管材 白色 4mmx200mtr（售完即止）

nil-ga-4mm-tubing-pvc-white-4mmx200mtr-while-stocks-last

RS PRO Datasheet

Screw

O Ring

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

RS Components ETH SG

Rs Pro 2345893 Adhesive Lined Heat Shrink Tubing, Black 4mm Sleeve Dia. X 1.22m Length 4:1 Ratio

rs pro 2345893 adhesive lined heat shrink tubing, black 4mm sleeve dia. 1.22m length 4:1 ratio tabung penyusut panas berlapis perekat, diameter lengan hitam. panjang 1,22m rasio heat-shrinkable tube menyusut tiub pengecutan haba dilapisi pelekat, nisbah 粘胶内衬热缩管，黑色 毫米套管直径。 长度 比例 热缩管 rs专业版

rs-pro-2345893-adhesive-lined-heat-shrink-tubing-black-4mm-sleeve-dia-x-1-22m-length-4-1-ratio

Siemens

STANLEY

Facom

ECLIPSE TOOLS

GEARWRENCH

Startech

MEAN WELL

Air Filters

Rs Pro 2354805 Flexible Tube, Silicone, 2mm Id, 4mm Od, White, 50m

rs pro 2354805 flexible tube, silicone, 2mm id, 4mm od, white, 50m tabung fleksibel, silikon, id 2mm, od 4mm, putih, hoses tiub 软管，硅胶，内径 2mm，外径 4mm，白色，50m rs专业版

rs-pro-2354805-flexible-tube-silicone-2mm-id-4mm-od-white-50m

Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 7mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 7mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 7mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 7mm, pack 10 cincin iwata, dalam luar kemasan washers pek iwata/岩田 垫片环，内径 外径 7mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-7mm-pack-of-10

Carbon Steel ID 4mm x OD 7mm x 0.10mm PN RF004007010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.15mm PN RF004007015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.20mm PN RF004007020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.30mm PN RF004007030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 0.50mm PN RF004007050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 7mm x 1mm PN RF004007100, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.05mm PN RB004007005, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.10mm PN RB004007010, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.15mm PN RB004007015, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.20mm PN RB004007020, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.30mm PN RB004007030, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 0.50mm PN RB004007050, Pack of 10 Pieces

Brass ID 4mm x OD 7mm x 1mm PN RB004007100, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.01mm PN RS004007001, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.02mm PN RS004007002, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.03mm PN RS004007003, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.05mm PN RS004007005, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.10mm PN RS004007010, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.15mm PN RS004007015, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.20mm PN RS004007020, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.30mm PN RS004007030, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 0.50mm PN RS004007050, Pack of 10 Pieces

304 SST ID 4mm x OD 7mm x 1mm PN RS004007100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 4mm X Outer Diameter 6mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 6mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 6mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 6mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 6mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 6mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 6mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 6mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-6mm-pack-of-10

Carbon Steel ID 4mm x OD 6mm x 0.10mm PN RF004006010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 6mm x 0.15mm PN RF004006015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 6mm x 0.20mm PN RF004006020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 6mm x 0.30mm PN RF004006030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 6mm x 0.50mm PN RF004006050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 6mm x 1mm PN RF004006100, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 0.05mm PN RB004006005, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 0.10mm PN RB004006010, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 0.15mm PN RB004006015, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 0.20mm PN RB004006020, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 0.30mm PN RB004006030, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 0.50mm PN RB004006050, Pack of 10 Pieces

Brass ID 4mm x OD 6mm x 1mm PN RB004006100, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.01mm PN RS004006001, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.02mm PN RS004006002, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.03mm PN RS004006003, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.05mm PN RS004006005, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.10mm PN RS004006010, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.15mm PN RS004006015, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.20mm PN RS004006020, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.30mm PN RS004006030, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 0.50mm PN RS004006050, Pack of 10 Pieces

304 SST ID 4mm x OD 6mm x 1mm PN RS004006100, Pack of 10 Pieces

Shim Ring, Inner Diameter 4mm X Outer Diameter 10mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 10mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 10mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 10mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 10mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 10mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 10mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 10mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-10mm-pack-of-10

Carbon Steel ID 4mm x OD 10mm x 0.10mm PN RF004010010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 10mm x 0.15mm PN RF004010015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 10mm x 0.20mm PN RF004010020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 10mm x 0.30mm PN RF004010030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 10mm x 0.50mm PN RF004010050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 10mm x 1mm PN RF004010100, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 0.05mm PN RB004010005, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 0.10mm PN RB004010010, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 0.15mm PN RB004010015, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 0.20mm PN RB004010020, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 0.30mm PN RB004010030, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 0.50mm PN RB004010050, Pack of 10 Pieces

Brass ID 4mm x OD 10mm x 1mm PN RB004010100, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.01mm PN RS004010001, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.02mm PN RS004010002, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.03mm PN RS004010003, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.05mm PN RS004010005, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.10mm PN RS004010010, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.15mm PN RS004010015, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.20mm PN RS004010020, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.30mm PN RS004010030, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 0.50mm PN RS004010050, Pack of 10 Pieces

304 SST ID 4mm x OD 10mm x 1mm PN RS004010100, Pack of 10 Pieces

Shim Ring, Inner Diameter 4mm X Outer Diameter 12mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 4mm X Outer Diameter 12mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 4mmOD: 12mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 4mm X Outer Diameter 12mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 4mm
OD: 12mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 4mm X Outer Diameter 12mm, Pack of 10

iwata shim ring, inner diameter 4mm outer 12mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 12mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-4mm-x-outer-diameter-12mm-pack-of-10

Carbon Steel ID 4mm x OD 12mm x 0.10mm PN RF004012010, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 12mm x 0.15mm PN RF004012015, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 12mm x 0.20mm PN RF004012020, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 12mm x 0.30mm PN RF004012030, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 12mm x 0.50mm PN RF004012050, Pack of 10 Pieces

Carbon Steel ID 4mm x OD 12mm x 1mm PN RF004012100, Pack of 10 Pieces