BOXO

ELORA

Screwdrivers & Screw Extractors

screwdrivers-screw-extractors

Ratchet Screwdrivers

ratchet-screwdrivers

Screwdrivers

screwdrivers

Torque Drivers

torque-drivers

Spanners & Sockets

spanners-sockets

Torque Wrenches

torque-wrenches

Boxo 3/8" Dr. Window Type Torque Wrench 12~60Nm (TWM2-60N-S) 

Large scale Window with unit. Unit (N.m) with vernier. At all times only one unit in the viewing area to avoid any reading error.

Automatic actuation: Actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.

Robust steel tube: With high corrosion protection, chrome plated silk-metal

Nonius: Model-dependent intervals of 1Nm allow very accurate settings.

Handgrip with a user aid: Black plastic handgrip, new ergonomic shape

Additional protection of the serial number. Serial number on the wrench and on the certificate for unambiguous product identification & traceable.

Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back.

Calibrated to a permitted +/- 3% deviation and better. 

Operation: Switch the lever of the reversible ratchet to correspond with the desired direction, clockwise or counter-clockwise. 

Concealed setting drill hole = secured adjusting/ setting system.

<h3 class="md-block-header-three">Boxo 3/8&quot; Dr. Window Type Torque Wrench 12~60Nm (TWM2-60N-S) </h3>Description and Feature:<ul class="md-block-unordered-list-item"><li>Large scale Window with unit. Unit (N.m) with vernier. At all times only one unit in the viewing area to avoid any reading error.</li><li>Automatic actuation: Actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.</li><li>Robust steel tube: With high corrosion protection, chrome plated silk-metal</li><li>Nonius: Model-dependent intervals of 1Nm allow very accurate settings.</li><li>Handgrip with a user aid: Black plastic handgrip, new ergonomic shape</li><li>Additional protection of the serial number. Serial number on the wrench and on the certificate for unambiguous product identification &amp; traceable.</li><li>Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back.</li><li>Calibrated to a permitted +/- 3% deviation and better. </li><li>Operation: Switch the lever of the reversible ratchet to correspond with the desired direction, clockwise or counter-clockwise. </li><li>Concealed setting drill hole = secured adjusting/ setting system.</li></ul>Technical Data:<ul class="md-block-unordered-list-item"><li>Square Drive: 3/8&quot;</li><li>Torque Range: 12 ~ 60 Nm</li><li>Teeth: 24</li><li>Length (mm): 395</li><li>Weight: 1.71kg</li></ul>

<h3>Boxo 3/8" Dr. Window Type Torque Wrench 12~60Nm (TWM2-60N-S) </h3>
Description and Feature:
<ul>
<li>Large scale Window with unit. Unit (N.m) with vernier. At all times only one unit in the viewing area to avoid any reading error.</li>
<li>Automatic actuation: Actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.</li>
<li>Robust steel tube: With high corrosion protection, chrome plated silk-metal</li>
<li>Nonius: Model-dependent intervals of 1Nm allow very accurate settings.</li>
<li>Handgrip with a user aid: Black plastic handgrip, new ergonomic shape</li>
<li>Additional protection of the serial number. Serial number on the wrench and on the certificate for unambiguous product identification &amp; traceable.</li>
<li>Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back.</li>
<li>Calibrated to a permitted +/- 3% deviation and better.&nbsp;</li>
<li>Operation: Switch the lever of the reversible ratchet to correspond with the desired direction, clockwise or counter-clockwise.&nbsp;</li>
<li>Concealed setting drill hole = secured adjusting/ setting system.</li>
</ul>
Technical Data:
<ul>
<li>Square Drive: 3/8"</li>
<li>Torque Range: 12 ~ 60 Nm</li>
<li>Teeth: 24</li>
<li>Length (mm): 395</li>
<li>Weight: 1.71kg</li>
</ul>

Terence 

Other Tools

Socket Sets

Impact Sockets

Terence Sim

buyerIntroduction

Boxo 3/8" Dr. Window Type Torque Wrench 12~60Nm -TWM2-60N

boxo 3/8" dr. window type torque wrench 12~60nm -twm2-60n kunci torsi tipe jendela wrenches pas sepana tork jenis tetingkap perengkuh boxo/盒装 3/8英寸窗式扭力扳手 扭力扳手 盒装

boxo-3-8-dr-window-type-torque-wrench-12-60nm-twm2-60n

- Large scale Window with unit. Unit (N.m) with vernier. At all times only one unit in the viewing area to avoid any reading error. 

- Automatic actuation: Actuates with a clear tactile impulse and audible signal and is immediately ready for operation again. 

- Robust steel tube: With high corrosion protection, chrome plated silk-metal 

- Nonius: Model-dependent intervals of 1Nm allow very accurate settings. 

- Handgrip with a user aid: Black plastic handgrip, new ergonomic shape 

- Additional protection of the serial number. Serial number on the wrench and on the certificate for unambiguous product identification & traceable.

 - Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. 

- Calibrated to a permitted +/- 3% deviation and better.  

- With 3/8" & 1/2" square drive and integrated lever-change reversible ratchet function for controlled clockwise tightening. 

- Operation: Switch the lever of the reversible ratchet to correspond with the desired direction, clockwise or counter-clockwise. 

 - Concealed setting drill hole = secured adjusting/ setting system.   

Description and Features: - Large scale Window with unit. Unit (N.m) with vernier. At all times only one unit in the viewing area to avoid any reading error. - Automatic actuation: Actuates with a clear tactile impulse and audible signal and is immediately ready for operation again. - Robust steel tube: With high corrosion protection, chrome plated silk-metal - Nonius: Model-dependent intervals of 1Nm allow very accurate settings. - Handgrip with a user aid: Black plastic handgrip, new ergonomic shape - Additional protection of the serial number. Serial number on the wrench and on the certificate for unambiguous product identification &amp; traceable. - Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back. - Calibrated to a permitted +/- 3% deviation and better. - With 3/8&quot; &amp; 1/2&quot; square drive and integrated lever-change reversible ratchet function for controlled clockwise tightening. - Operation: Switch the lever of the reversible ratchet to correspond with the desired direction, clockwise or counter-clockwise. - Concealed setting drill hole = secured adjusting/ setting system. Technical Data: - Square drive: 	1/2&quot; - Max. operating range: 	40 ~ 200 Nm - Teeth: 24 - Length: 55.6cm - Weight: 2.3 kg

Description and Features:&nbsp;
- Large scale Window with unit. Unit (N.m) with vernier. At all times only one unit in the viewing area to avoid any reading error.&nbsp;
- Automatic actuation: Actuates with a clear tactile impulse and audible signal and is immediately ready for operation again.&nbsp;
- Robust steel tube: With high corrosion protection, chrome plated silk-metal&nbsp;
- Nonius: Model-dependent intervals of 1Nm allow very accurate settings.&nbsp;
- Handgrip with a user aid: Black plastic handgrip, new ergonomic shape&nbsp;
- Additional protection of the serial number. Serial number on the wrench and on the certificate for unambiguous product identification &amp; traceable.
&nbsp;- Classified to DIN EN ISO 6789:2003 Type II Class A, with a factory certificate allowing for operations to be traced back.&nbsp;
- Calibrated to a permitted +/- 3% deviation and better.&nbsp;&nbsp;
- With 3/8" &amp; 1/2" square drive and integrated lever-change reversible ratchet function for controlled clockwise tightening.&nbsp;
- Operation: Switch the lever of the reversible ratchet to correspond with the desired direction, clockwise or counter-clockwise.&nbsp;
&nbsp;- Concealed setting drill hole = secured adjusting/ setting system.&nbsp;&nbsp;&nbsp;
Technical Data:&nbsp;&nbsp;&nbsp;&nbsp;
- Square drive: 	1/2"&nbsp;
- Max. operating range: 	40 ~ 200 Nm&nbsp;
- Teeth: 24&nbsp;
- Length: 55.6cm&nbsp;
- Weight: 2.3 kg&nbsp;

Boxo 1/2" Dr. Torque Wrench 40-200nm TWM2-200N-S

boxo 1/2" dr. torque wrench 40-200nm twm2-200n-s 1/2 "dr. wrenches kunci pas torsi perengkuh tork boxo/盒装 1/2“扭力扳手40-200nm 扭力扳手 盒装

boxo-1-2-dr-torque-wrench-40-200nm-twm2-200n-s

Elora Torque Wrench With Rectangular Intake 2034-60 

for use with ELORA interchangeable spanner heads

main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.

safe locking of the adjusted torque value by securing button at the handle end

ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant

for clockwise and anti-clockwise tightening by turning the torque wrench

with very noticeable and audible (‚‘click‘‘) signal

factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)

according to DIN EN ISO 6789:2017 Part 1, Typ II Class A

with traceable declaration of conformance

<h3 class="md-block-header-three">Elora Torque Wrench With Rectangular Intake 2034-60 </h3><ul class="md-block-unordered-list-item"><li>for use with ELORA interchangeable spanner heads</li><li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise and anti-clockwise tightening by turning the torque wrench</li><li>with robust, matt steel tube</li><li>with very noticeable and audible (‚‘click‘‘) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li><li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +- 3%</li><li>Drive (mm): 9x12 </li><li>Ss (mm): 314,5 </li><li>Measuring range (Nm): 10-60 </li><li>Graduation (Nm): 0,25 </li></ul>

<h3>Elora Torque Wrench With Rectangular Intake 2034-60&nbsp;</h3>
<ul>
<li>for use with ELORA interchangeable spanner heads</li>
<li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise and anti-clockwise tightening by turning the torque wrench</li>
<li>with robust, matt steel tube</li>
<li>with very noticeable and audible (‚‘click‘‘) signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li>
<li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +- 3%</li>
<li>Drive (mm): 9x12&nbsp;</li>
<li>Ss (mm): 314,5&nbsp;</li>
<li>Measuring range (Nm): 10-60&nbsp;</li>
<li>Graduation (Nm): 0,25&nbsp;</li>
</ul>

FORCE

Others

SATA

Nexus

Sockets

Ring Spanners

Flank Sockets

Open End Spanners

Combination Spanners

Hex Keys & Sets

Screwdriver Bits & Bit Set

Mr Jones Ong

Elora Torque Wrench With Rectangular Intake 2034-60

elora torque wrench rectangular intake 2034-60 kunci torsi dengan persegi panjang wrenches pas sepana tork pengambilan segi empat perengkuh elora/埃洛拉 扭矩扳手，带矩形进气口 扭力扳手 埃洛拉

elora-torque-wrench-with-rectangular-intake-2034-60

Elora Torque Wrench With Rectangular Intake 2033-20 

main measurement unit for Nm with vernier scale, secondary measurement unit for ft-lb

bi-directional fixing by turning the torque wrench

with very noticeable and audible ("click") signal

factory depth gauges: Ss = 17,5 mm (9x12 mm) and Ss = 25 mm (14x18 mm)

according to DIN EN ISO 6789:2017 Part 1, Typ ll Class A

<h3 class="md-block-header-three">Elora Torque Wrench With Rectangular Intake 2033-20 </h3><ul class="md-block-unordered-list-item"><li>for use with ELORA interchangeable spanner heads</li><li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft-lb</li><li>safe locking of the set torque value</li><li>bi-directional fixing by turning the torque wrench</li><li>with robust, matt steel tube</li><li>with very noticeable and audible (&quot;click&quot;) signal</li><li>nonslip QUATROLIT-2C-handle</li><li>factory depth gauges: Ss = 17,5 mm (9x12 mm) and Ss = 25 mm (14x18 mm)</li><li>according to DIN EN ISO 6789:2017 Part 1, Typ ll Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +- 4%</li><li>Drive (mm): 9x12 </li><li>Is (mm): 282,5 </li><li>Measuring range (Nm): 4-20 </li><li>Graduation (Nm): 0,1 </li></ul>

<h3>Elora Torque Wrench With Rectangular Intake 2033-20&nbsp;</h3>
<ul>
<li>for use with ELORA interchangeable spanner heads</li>
<li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft-lb</li>
<li>safe locking of the set torque value</li>
<li>bi-directional fixing by turning the torque wrench</li>
<li>with robust, matt steel tube</li>
<li>with very noticeable and audible ("click") signal</li>
<li>nonslip QUATROLIT-2C-handle</li>
<li>factory depth gauges: Ss = 17,5 mm (9x12 mm) and Ss = 25 mm (14x18 mm)</li>
<li>according to DIN EN ISO 6789:2017 Part 1, Typ ll Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +- 4%</li>
<li>Drive (mm): 9x12&nbsp;</li>
<li>Is (mm): 282,5&nbsp;</li>
<li>Measuring range (Nm): 4-20&nbsp;</li>
<li>Graduation (Nm): 0,1&nbsp;</li>
</ul>

Elora Torque Wrench With Rectangular Intake 2033-20

elora torque wrench rectangular intake 2033-20 kunci torsi dengan persegi panjang wrenches pas sepana tork pengambilan segi empat perengkuh elora/埃洛拉 扭矩扳手，带矩形进气口 扭力扳手 埃洛拉

elora-torque-wrench-with-rectangular-intake-2033-20

Elora Torque Wrench With Rectangular Intake 2034-125 

<h3 class="md-block-header-three">Elora Torque Wrench With Rectangular Intake 2034-125 </h3><ul class="md-block-unordered-list-item"><li>for use with ELORA interchangeable spanner heads</li><li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise and anti-clockwise tightening by turning the torque wrench</li><li>with robust, matt steel tube</li><li>with very noticeable and audible (‚‘click‘‘) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li><li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +- 3%</li><li>Drive (mm): 9x12 </li><li>Ss (mm): 370,5 </li><li>Measuring range (Nm): 25-125 </li><li>Graduation (Nm): 0,25 </li></ul>

<h3>Elora Torque Wrench With Rectangular Intake 2034-125&nbsp;</h3>
<ul>
<li>for use with ELORA interchangeable spanner heads</li>
<li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise and anti-clockwise tightening by turning the torque wrench</li>
<li>with robust, matt steel tube</li>
<li>with very noticeable and audible (‚‘click‘‘) signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li>
<li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +- 3%</li>
<li>Drive (mm): 9x12&nbsp;</li>
<li>Ss (mm): 370,5&nbsp;</li>
<li>Measuring range (Nm): 25-125&nbsp;</li>
<li>Graduation (Nm): 0,25&nbsp;</li>
</ul>

Elora Torque Wrench With Rectangular Intake 2034-125

elora torque wrench rectangular intake 2034-125 kunci torsi dengan persegi panjang wrenches pas sepana tork pengambilan segi empat perengkuh elora/埃洛拉 扭矩扳手，带矩形进气口 扭力扳手 埃洛拉

elora-torque-wrench-with-rectangular-intake-2034-125

Elora Torque Wrench With Rectangular Intake 2034-200 

<h3 class="md-block-header-three">Elora Torque Wrench With Rectangular Intake 2034-200 </h3><ul class="md-block-unordered-list-item"><li>for use with ELORA interchangeable spanner heads</li><li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise and anti-clockwise tightening by turning the torque wrench</li><li>with robust, matt steel tube</li><li>with very noticeable and audible (‚‘click‘‘) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li><li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +- 3%</li><li>Drive (mm): 14x18 </li><li>Ss (mm): 410,0 </li><li>Measuring range (Nm): 4-200 </li><li>Graduation (Nm): 0,5 </li></ul>

<h3>Elora Torque Wrench With Rectangular Intake 2034-200&nbsp;</h3>
<ul>
<li>for use with ELORA interchangeable spanner heads</li>
<li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise and anti-clockwise tightening by turning the torque wrench</li>
<li>with robust, matt steel tube</li>
<li>with very noticeable and audible (‚‘click‘‘) signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li>
<li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +- 3%</li>
<li>Drive (mm): 14x18&nbsp;</li>
<li>Ss (mm): 410,0&nbsp;</li>
<li>Measuring range (Nm): 4-200&nbsp;</li>
<li>Graduation (Nm): 0,5&nbsp;&nbsp;</li>
</ul>

Elora Torque Wrench With Rectangular Intake 2034-200

elora torque wrench rectangular intake 2034-200 kunci torsi dengan persegi panjang wrenches pas sepana tork pengambilan segi empat perengkuh elora/埃洛拉 扭矩扳手，带矩形进气口 扭力扳手 埃洛拉

elora-torque-wrench-with-rectangular-intake-2034-200

Elora 2034-60 10-60 Nm Torque Wrench With Rectangular Intake

Description:- For use with Elora interchangeable spanner heads
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb
safe locking of the set torque value
bi-directional fixing
with robust, matt steel tube
with very noticeable and audible (”click”) signal
2 component Quatrolit handle
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm)
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate

Elora 2034-125 Torque Wrench With Rectangular Intake 25-125 nm

Elora 2034-200 Torque Wrench With Rectangular Intake 40-200 nm

Elora 2034-335 Torque Wrench With Rectangular Intake 65-335 nm

<h3 class="md-block-header-three">Elora 2034-60 10-60 Nm Torque Wrench With Rectangular Intake</h3><h3 class="md-block-header-three">Product code: 2034000601000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 9×12</li><li>SS mm:- 314,5</li><li>Measuring range Nm:- 22190</li><li>Measuring range ft.lb.:- 16681</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 345</li><li>Weight g:- 1000</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 2034-125 Torque Wrench With Rectangular Intake 25-125 nm</h3><h3 class="md-block-header-three">Product code: 2034001251000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 9×12</li><li>SS mm:- 370,5</li><li>Measuring range Nm:- 25-125</li><li>Measuring range ft.lb.:- 15-75</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 438</li><li>Weight g:- 900</li></ul> <h3 class="md-block-header-three">Elora 2034-200 Torque Wrench With Rectangular Intake 40-200 nm</h3><h3 class="md-block-header-three">Product code: 2034002001000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 14×18</li><li>SS mm:- 410,0</li><li>Measuring range Nm:- 40-200</li><li>Measuring range ft.lb.:- 30-150</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 455</li><li>Weight g:- 1198</li></ul> <h3 class="md-block-header-three">Elora 2034-335 Torque Wrench With Rectangular Intake 65-335 nm</h3><h3 class="md-block-header-three">Product code: 2034003351000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 14×18</li><li>SS mm:- 470,0</li><li>Measuring range Nm:- 65-335</li><li>Measuring range ft.lb.:- 50-250</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 515</li><li>Weight g:- 1305</li></ul>

<h3>Elora 2034-60 10-60 Nm Torque Wrench With Rectangular Intake</h3>
<h3>Product code: 2034000601000 </h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 9×12</li>
<li>SS mm:- 314,5</li>
<li>Measuring range Nm:- 22190</li>
<li>Measuring range ft.lb.:- 16681</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 345</li>
<li>Weight g:- 1000</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 2034-125 Torque Wrench With Rectangular Intake 25-125 nm</h3>
<h3>Product code: 2034001251000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 9×12</li>
<li>SS mm:- 370,5</li>
<li>Measuring range Nm:- 25-125</li>
<li>Measuring range ft.lb.:- 15-75</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 438</li>
<li>Weight g:- 900</li>
</ul>
&nbsp;
<h3>Elora 2034-200 Torque Wrench With Rectangular Intake 40-200 nm</h3>
<h3>Product code: 2034002001000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 14×18</li>
<li>SS mm:- 410,0</li>
<li>Measuring range Nm:- 40-200</li>
<li>Measuring range ft.lb.:- 30-150</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 455</li>
<li>Weight g:- 1198</li>
</ul>
&nbsp;
<h3>Elora 2034-335 Torque Wrench With Rectangular Intake 65-335 nm</h3>
<h3>Product code: 2034003351000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 14×18</li>
<li>SS mm:- 470,0</li>
<li>Measuring range Nm:- 65-335</li>
<li>Measuring range ft.lb.:- 50-250</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 515</li>
<li>Weight g:- 1305</li>
</ul>

Ian Ong

WEICON

LOCTITE

METABO

Permatex

Fujiplus

DEVCON

Molykote

Adhesive Glue

Sealants

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Sharon/Joey

Elora 2034 Torque Wrench With Rectangular Intake

elora 2034 torque wrench rectangular intake kunci torsi dengan asupan persegi panjang wrenches pas tork pengambilan segi empat perengkuh elora/埃洛拉 2034矩形扳手扭矩扳手 扭力扳手 埃洛拉

elora-2034-torque-wrench-with-rectangular-intake

Sizes

Elora Torque Wrench With Vernier Scale 2179-60 

for controlled torque application from 10 – 335 Nm

main unit Nm with Nonius, secondary unit ft.lb.

fine tooth ratchet, smallest possible swivel angle 8°

very noticeable and hearable ('click') signal

according to EN ISO 6789:2017 Part 1, Typ II Class A

<h3 class="md-block-header-three">Elora Torque Wrench With Vernier Scale 2179-60 </h3><ul class="md-block-unordered-list-item"><li>for controlled torque application from 10 – 335 Nm</li><li>main unit Nm with Nonius, secondary unit ft.lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise fixing</li><li>with robust, matt steel tube</li><li>fine tooth ratchet, smallest possible swivel angle 8°</li><li>very noticeable and hearable (&#x27;click&#x27;) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +-3%</li><li>Drive: 3/8&#x27; </li><li>Head: Reversible ratchet </li><li>Measuring range (Nm): 10-60 </li><li>Graduation (Nm): 0,25 </li></ul>

<h3>Elora Torque Wrench With Vernier Scale 2179-60&nbsp;</h3>
<ul>
<li>for controlled torque application from 10 – 335 Nm</li>
<li>main unit Nm with Nonius, secondary unit ft.lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise fixing</li>
<li>with robust, matt steel tube</li>
<li>fine tooth ratchet, smallest possible swivel angle 8°</li>
<li>very noticeable and hearable ('click') signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +-3%</li>
<li>Drive: 3/8'&nbsp;</li>
<li>Head: Reversible ratchet&nbsp;</li>
<li>Measuring range (Nm): 10-60&nbsp;</li>
<li>Graduation (Nm): 0,25&nbsp;</li>
</ul>

Elora Torque Wrench With Vernier Scale 2179-60

elora torque wrench vernier scale 2179-60 kunci torsi dengan skala wrenches pas sepana tork perengkuh elora/埃洛拉 带游标刻度的扭矩扳手 扭力扳手 埃洛拉

elora-torque-wrench-with-vernier-scale-2179-60

Elora Torque Wrench With Vernier Scale 2179-125 

<h3 class="md-block-header-three">Elora Torque Wrench With Vernier Scale 2179-125 </h3><ul class="md-block-unordered-list-item"><li>for controlled torque application from 10 – 335 Nm</li><li>main unit Nm with Nonius, secondary unit ft.lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise fixing</li><li>with robust, matt steel tube</li><li>fine tooth ratchet, smallest possible swivel angle 8°</li><li>very noticeable and hearable (&#x27;click&#x27;) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +-3%</li><li>Drive: 1/2&#x27; </li><li>Head: Reversible ratchet </li><li>Measuring range (Nm): 25-125 </li><li>Graduation (Nm): 0,25 </li></ul>

<h3>Elora Torque Wrench With Vernier Scale 2179-125&nbsp;</h3>
<ul>
<li>for controlled torque application from 10 – 335 Nm</li>
<li>main unit Nm with Nonius, secondary unit ft.lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise fixing</li>
<li>with robust, matt steel tube</li>
<li>fine tooth ratchet, smallest possible swivel angle 8°</li>
<li>very noticeable and hearable ('click') signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +-3%</li>
<li>Drive: 1/2'&nbsp;</li>
<li>Head: Reversible ratchet&nbsp;</li>
<li>Measuring range (Nm): 25-125&nbsp;</li>
<li>Graduation (Nm): 0,25&nbsp;</li>
</ul>

Elora Torque Wrench With Vernier Scale 2179-125

elora torque wrench vernier scale 2179-125 kunci torsi dengan skala wrenches pas sepana tork perengkuh elora/埃洛拉 带游标刻度的扭矩扳手 扭力扳手 埃洛拉

elora-torque-wrench-with-vernier-scale-2179-125

Elora Torque Wrench With Rectangular Intake 2034-335 

<h3 class="md-block-header-three">Elora Torque Wrench With Rectangular Intake 2034-335 </h3><ul class="md-block-unordered-list-item"><li>for use with ELORA interchangeable spanner heads</li><li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise and anti-clockwise tightening by turning the torque wrench</li><li>with robust, matt steel tube</li><li>with very noticeable and audible (‚‘click‘‘) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li><li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +- 3%</li><li>Drive (mm): 14x18 </li><li>Ss (mm): 470,0 </li><li>Measuring range (Nm): 65-335 </li><li>Graduation (Nm): 1,0 </li></ul>

<h3>Elora Torque Wrench With Rectangular Intake 2034-335&nbsp;</h3>
<ul>
<li>for use with ELORA interchangeable spanner heads</li>
<li>main measurement unit for Nm with vernier scale, secondary measurement unit for ft.-lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise and anti-clockwise tightening by turning the torque wrench</li>
<li>with robust, matt steel tube</li>
<li>with very noticeable and audible (‚‘click‘‘) signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>factory depth gauges: Ss = 17,5 mm (9 x 12 mm) and Ss = 25 mm (14 x 18 mm)</li>
<li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +- 3%</li>
<li>Drive (mm): 14x18&nbsp;</li>
<li>Ss (mm): 470,0&nbsp;</li>
<li>Measuring range (Nm): 65-335&nbsp;</li>
<li>Graduation (Nm): 1,0&nbsp;</li>
</ul>

Elora Torque Wrench With Rectangular Intake 2034-335

elora torque wrench rectangular intake 2034-335 kunci torsi dengan persegi panjang wrenches pas sepana tork pengambilan segi empat perengkuh elora/埃洛拉 扭矩扳手，带矩形进气口 扭力扳手 埃洛拉

elora-torque-wrench-with-rectangular-intake-2034-335

Elora Torque Wrench 1/4" With Vernier Scale 2178-20 

for controlled torque application from 4 - 20 Nm

main unit Nm, secondary unit ft.lb, both with Nonius

with robust, matt-chrome plated steel tube

very noticeable and audible (‘‘click‘‘) signal

Classified according to DIN EN ISO 6789: 2003 Type II Class A

<h3 class="md-block-header-three">Elora Torque Wrench 1/4&quot; With Vernier Scale 2178-20 </h3><ul class="md-block-unordered-list-item"><li>for controlled torque application from 4 - 20 Nm</li><li>main unit Nm, secondary unit ft.lb, both with Nonius</li><li>safe locking of the set torque value</li><li>for clockwise fixing</li><li>with robust, matt-chrome plated steel tube</li><li>reversible ratchet</li><li>very noticeable and audible (‘‘click‘‘) signal</li><li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li><li>Classified according to DIN EN ISO 6789: 2003 Type II Class A</li><li>with traceable declaration of conformance</li><li>Tripping accuracy +- 4%</li><li>Drive: 1/4&quot; </li><li>Measuring range (Nm): 4-20 </li><li>Graduation (Nm): 0,1 </li><li>Measuring range (ft.lb): 3,3-14,4 </li></ul>

<h3>Elora Torque Wrench 1/4" With Vernier Scale 2178-20&nbsp;</h3>
<ul>
<li>for controlled torque application from 4 - 20 Nm</li>
<li>main unit Nm, secondary unit ft.lb, both with Nonius</li>
<li>safe locking of the set torque value</li>
<li>for clockwise fixing</li>
<li>with robust, matt-chrome plated steel tube</li>
<li>reversible ratchet</li>
<li>very noticeable and audible (‘‘click‘‘) signal</li>
<li>according to DIN EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>Classified according to DIN EN ISO 6789: 2003 Type II Class A</li>
<li>with traceable declaration of conformance</li>
<li>Tripping accuracy +- 4%</li>
<li>Drive: 1/4"&nbsp;</li>
<li>Measuring range (Nm): 4-20&nbsp;</li>
<li>Graduation (Nm): 0,1&nbsp;</li>
<li>Measuring range (ft.lb): 3,3-14,4&nbsp;</li>
</ul>

Elora Torque Wrench 1/4" With Vernier Scale 2178-20

elora torque wrench 1/4" vernier scale 2178-20 kunci torsi dengan skala wrenches pas sepana tork perengkuh elora/埃洛拉 扭矩扳手 1/4 英寸，带游标刻度 扭力扳手 埃洛拉

elora-torque-wrench-1-4-with-vernier-scale-2178-20

Elora 2179-60 10-60 Nm Torque Wrench With Vernier Scale

Description:- For controlled torque application from 10 – 335 Nm
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb
click type torque wrench
safe locking of the set torque value
for clockwise fixing
with robust, matt steel tube
all models with reversible ratchet and robust Elora D-ratchet mechanism
very noticeable and hearable (”click”) signal
calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate

Elora 2179-125 25-125 Nm Torque Wrench With Vernier Scale

Elora 2179-200 40-200 Nm With Vernier Scale Torque Wrench

Elora 2179-335 65-335 Nm With Vernier Scale Torque Wrench

<h3 class="md-block-header-three">Elora 2179-60 10-60 Nm Torque Wrench With Vernier Scale</h3><h3 class="md-block-header-three">Product code: 2179000601000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For controlled torque application from 10 – 335 Nm main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb click type torque wrench safe locking of the set torque value for clockwise fixing with robust, matt steel tube all models with reversible ratchet and robust Elora D-ratchet mechanism very noticeable and hearable (”click”) signal calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive:- 3/8”</li><li>Measuring range Nm:- 22190</li><li>Measuring range ft.lb.:- 16681</li><li>Length mm:- 360</li><li>Weight g:- 1250</li></ul> <h3 class="md-block-header-three">Elora 2179-125 25-125 Nm Torque Wrench With Vernier Scale</h3><h3 class="md-block-header-three">Product code: 2179001251000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For controlled torque application from 10 – 335 Nm main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb click type torque wrench safe locking of the set torque value for clockwise fixing with robust, matt steel tube all models with reversible ratchet and robust Elora D-ratchet mechanism very noticeable and hearable (”click”) signal calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive:- 1/2”</li><li>Measuring range Nm:- 25-125</li><li>Measuring range ft.lb.:- 15-75</li><li>Length mm:- 438</li><li>Weight g:- 1230</li></ul> <h3 class="md-block-header-three">Elora 2179-200 40-200 Nm With Vernier Scale Torque Wrench</h3><h3 class="md-block-header-three">Product code: 2179002001000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For controlled torque application from 10 – 335 Nm main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb click type torque wrench safe locking of the set torque value for clockwise fixing with robust, matt steel tube all models with reversible ratchet and robust Elora D-ratchet mechanism very noticeable and hearable (”click”) signal calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive:- 1/2”</li><li>Measuring range Nm:- 40-200</li><li>Measuring range ft.lb.:- 30-150</li><li>Length mm:- 460</li><li>Weight g:- 1366</li></ul> <h3 class="md-block-header-three">Elora 2179-335 65-335 Nm With Vernier Scale Torque Wrench</h3><h3 class="md-block-header-three">Product code: 2179003351000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For controlled torque application from 10 – 335 Nm main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb click type torque wrench safe locking of the set torque value for clockwise fixing with robust, matt steel tube all models with reversible ratchet and robust Elora D-ratchet mechanism very noticeable and hearable (”click”) signal calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive:- 1/2”</li><li>Measuring range Nm:- 65-335</li><li>Measuring range ft.lb.:- 50-250</li><li>Length mm:- 520</li><li>Weight g:- 1465</li></ul>

<h3>Elora 2179-60 10-60 Nm Torque Wrench With Vernier Scale</h3>
<h3>Product code: 2179000601000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For controlled torque application from 10 – 335 Nm 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
click type torque wrench 
safe locking of the set torque value 
for clockwise fixing 
with robust, matt steel tube 
all models with reversible ratchet and robust Elora D-ratchet mechanism 
very noticeable and hearable (”click”) signal 
calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive:- 3/8”</li>
<li>Measuring range Nm:- 22190</li>
<li>Measuring range ft.lb.:- 16681</li>
<li>Length mm:- 360</li>
<li>Weight g:- 1250</li>
</ul>
&nbsp;
<h3>Elora 2179-125 25-125 Nm Torque Wrench With Vernier Scale</h3>
<h3>Product code: 2179001251000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For controlled torque application from 10 – 335 Nm 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
click type torque wrench 
safe locking of the set torque value 
for clockwise fixing 
with robust, matt steel tube 
all models with reversible ratchet and robust Elora D-ratchet mechanism 
very noticeable and hearable (”click”) signal 
calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive:- 1/2”</li>
<li>Measuring range Nm:- 25-125</li>
<li>Measuring range ft.lb.:- 15-75</li>
<li>Length mm:- 438</li>
<li>Weight g:- 1230</li>
</ul>
&nbsp;
<h3>Elora 2179-200 40-200 Nm With Vernier Scale Torque Wrench</h3>
<h3>Product code: 2179002001000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For controlled torque application from 10 – 335 Nm 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
click type torque wrench 
safe locking of the set torque value 
for clockwise fixing 
with robust, matt steel tube 
all models with reversible ratchet and robust Elora D-ratchet mechanism 
very noticeable and hearable (”click”) signal 
calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive:- 1/2”</li>
<li>Measuring range Nm:- 40-200</li>
<li>Measuring range ft.lb.:- 30-150</li>
<li>Length mm:- 460</li>
<li>Weight g:- 1366</li>
</ul>
&nbsp;
<h3>Elora 2179-335 65-335 Nm With Vernier Scale Torque Wrench</h3>
<h3>Product code: 2179003351000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For controlled torque application from 10 – 335 Nm 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
click type torque wrench 
safe locking of the set torque value 
for clockwise fixing 
with robust, matt steel tube 
all models with reversible ratchet and robust Elora D-ratchet mechanism 
very noticeable and hearable (”click”) signal 
calibration accuracy of +- 3% of the pre-set torque value, exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive:- 1/2”</li>
<li>Measuring range Nm:- 65-335</li>
<li>Measuring range ft.lb.:- 50-250</li>
<li>Length mm:- 520</li>
<li>Weight g:- 1465</li>
</ul>

Elora 2179 Torque Wrench With Vernier Scale

elora 2179 torque wrench vernier scale kunci torsi dengan skala wrenches pas tork perengkuh elora/埃洛拉 2179游标刻度扭力扳手 扭力扳手 埃洛拉

elora-2179-torque-wrench-with-vernier-scale

Elora Torque Wrench With Vernier Scale 2179-200 

<h3 class="md-block-header-three">Elora Torque Wrench With Vernier Scale 2179-200 </h3><ul class="md-block-unordered-list-item"><li>for controlled torque application from 10 – 335 Nm</li><li>main unit Nm with Nonius, secondary unit ft.lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise fixing</li><li>with robust, matt steel tube</li><li>fine tooth ratchet, smallest possible swivel angle 8°</li><li>very noticeable and hearable (&#x27;click&#x27;) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +-3%</li><li>Drive: 1/2&#x27; </li><li>Head: Reversible ratchet </li><li>Measuring range (Nm): 40-200 </li><li>Graduation (Nm): 0,5 </li></ul>

<h3>Elora Torque Wrench With Vernier Scale 2179-200&nbsp;</h3>
<ul>
<li>for controlled torque application from 10 – 335 Nm</li>
<li>main unit Nm with Nonius, secondary unit ft.lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise fixing</li>
<li>with robust, matt steel tube</li>
<li>fine tooth ratchet, smallest possible swivel angle 8°</li>
<li>very noticeable and hearable ('click') signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +-3%</li>
<li>Drive: 1/2'&nbsp;</li>
<li>Head: Reversible ratchet&nbsp;</li>
<li>Measuring range (Nm): 40-200&nbsp;</li>
<li>Graduation (Nm): 0,5&nbsp;</li>
</ul>

Elora Torque Wrench With Vernier Scale 2179-200

elora torque wrench vernier scale 2179-200 kunci torsi dengan skala wrenches pas sepana tork perengkuh elora/埃洛拉 带游标刻度的扭矩扳手 扭力扳手 埃洛拉

elora-torque-wrench-with-vernier-scale-2179-200

Elora 2011-1000 Torque Screwdriver 1/4" With Vernier Scale 

for controlled torque application from 2 - 10 Nm

a disengaging coupler indicates the achievement of the release moment

¼“ internal hexagon socket for ¼“ bits according to DIN 3126-C 6,3

¼“ square socket at the end of the screwdriver ensuring support of power transmission

according to EN ISO 6789:2017 Part 1, Typ II Class D

tripping accuracy +- 6% from the set value

<h3 class="md-block-header-three">Elora 2011-1000 Torque Screwdriver 1/4&quot; With Vernier Scale </h3>Details<ul class="md-block-unordered-list-item"><li>for controlled torque application from 2 - 10 Nm</li><li>a disengaging coupler indicates the achievement of the release moment</li><li>and prevents overtightening of the screw</li><li>¼“ internal hexagon socket for ¼“ bits according to DIN 3126-C 6,3</li><li>bi-directional tightening</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>¼“ square socket at the end of the screwdriver ensuring support of power transmission</li><li>according to EN ISO 6789:2017 Part 1, Typ II Class D</li><li>with traceable declaration of conformance</li><li>tripping accuracy +- 6% from the set value</li></ul>

<h3>Elora 2011-1000 Torque Screwdriver 1/4" With Vernier Scale </h3>
Details
<ul>
<li>for controlled torque application from 2 - 10 Nm</li>
<li>a disengaging coupler indicates the achievement of the release moment</li>
<li>and prevents overtightening of the screw</li>
<li>¼“ internal hexagon socket for ¼“ bits according to DIN 3126-C 6,3</li>
<li>bi-directional tightening</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>¼“ square socket at the end of the screwdriver ensuring support of power transmission</li>
<li>according to EN ISO 6789:2017 Part 1, Typ II Class D</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +- 6% from the set value</li>
</ul>

Elora 2011-1000 Torque Screwdriver 1/4" With Vernier Scale

elora 2011-1000 torque screwdriver 1/4" vernier scale obeng torsi dengan skala ratchet screwdrivers pemutar skru tork elora/埃洛拉 扭矩螺丝刀 1/4 英寸，带游标刻度 棘轮螺丝刀 埃洛拉

elora-2011-1000-torque-screwdriver-1-4-with-vernier-scale

Elora Torque Wrench With Vernier Scale 2179-335 

<h3 class="md-block-header-three">Elora Torque Wrench With Vernier Scale 2179-335 </h3><ul class="md-block-unordered-list-item"><li>for controlled torque application from 10 – 335 Nm</li><li>main unit Nm with Nonius, secondary unit ft.lb.</li><li>safe locking of the adjusted torque value by securing button at the handle end</li><li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li><li>for clockwise fixing</li><li>with robust, matt steel tube</li><li>fine tooth ratchet, smallest possible swivel angle 8°</li><li>very noticeable and hearable (&#x27;click&#x27;) signal</li><li>nonslip QUATROLIT®-2C-handle</li><li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li><li>with traceable declaration of conformance</li><li>tripping accuracy +-3%</li><li>Drive: 1/2&#x27; </li><li>Head: Reversible ratchet </li><li>Measuring range (Nm): 65-335 </li><li>Graduation (Nm): 1,0 </li></ul>

<h3>Elora Torque Wrench With Vernier Scale 2179-335&nbsp;</h3>
<ul>
<li>for controlled torque application from 10 – 335 Nm</li>
<li>main unit Nm with Nonius, secondary unit ft.lb.</li>
<li>safe locking of the adjusted torque value by securing button at the handle end</li>
<li>ELORA-No. 2179-S: exchanging the locking knob through the safety cap, the torque can be fixed tamper-resistant</li>
<li>for clockwise fixing</li>
<li>with robust, matt steel tube</li>
<li>fine tooth ratchet, smallest possible swivel angle 8°</li>
<li>very noticeable and hearable ('click') signal</li>
<li>nonslip QUATROLIT®-2C-handle</li>
<li>according to EN ISO 6789:2017 Part 1, Typ II Class A</li>
<li>with traceable declaration of conformance</li>
<li>tripping accuracy +-3%</li>
<li>Drive: 1/2'&nbsp;</li>
<li>Head: Reversible ratchet&nbsp;</li>
<li>Measuring range (Nm): 65-335&nbsp;</li>
<li>Graduation (Nm): 1,0&nbsp;</li>
</ul>

Elora Torque Wrench With Vernier Scale 2179-335

elora torque wrench vernier scale 2179-335 kunci torsi dengan skala wrenches pas sepana tork perengkuh elora/埃洛拉 带游标刻度的扭矩扳手 扭力扳手 埃洛拉

elora-torque-wrench-with-vernier-scale-2179-335

Elora 2178-20 4-20 Nm Torque Wrench 1/4″ Drive

Description:- For controlled torque application from 4 – 20 Nm
main measurement unit for Nm with vernier scale, auxiliary measurement unit for in-lb
click type torque wrench
safe locking of the set torque value
for clockwise fixing
with robust, matt-chrome plated steel tube
reversible ratchet
very noticeable and audible (”click”) signal
classified Conforms to DIN EN ISO 6789:2003 Type II Class A
calibrated accuracy of +-4%, with traceable factory calibration certificate

<h3 class="md-block-header-three">Elora 2178-20 4-20 Nm Torque Wrench 1/4″ Drive</h3><h3 class="md-block-header-three">Product code: 2178000201000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For controlled torque application from 4 – 20 Nm main measurement unit for Nm with vernier scale, auxiliary measurement unit for in-lb click type torque wrench safe locking of the set torque value for clockwise fixing with robust, matt-chrome plated steel tube reversible ratchet very noticeable and audible (”click”) signal classified Conforms to DIN EN ISO 6789:2003 Type II Class A calibrated accuracy of +-4%, with traceable factory calibration certificate</li><li>Drive:- 1/4”</li><li>Measuring range Nm:- 43922</li><li>Measuring range ft.lb.:- 3,3-14,4</li><li>Length mm:- 320</li><li>Weight g:- 900</li></ul>

<h3>Elora 2178-20 4-20 Nm Torque Wrench 1/4″ Drive</h3>
<h3>Product code: 2178000201000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For controlled torque application from 4 – 20 Nm 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for in-lb 
click type torque wrench 
safe locking of the set torque value 
for clockwise fixing 
with robust, matt-chrome plated steel tube 
reversible ratchet 
very noticeable and audible (”click”) signal 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A 
calibrated accuracy of +-4%, with traceable factory calibration certificate</li>
<li>Drive:- 1/4”</li>
<li>Measuring range Nm:- 43922</li>
<li>Measuring range ft.lb.:- 3,3-14,4</li>
<li>Length mm:- 320</li>
<li>Weight g:- 900</li>
</ul>