ELORA

Extech

Test & Measurement

test-measurement

Flow & PH Meters

flow-ph-meters

Spanners & Sockets

spanners-sockets

Torque Wrenches

torque-wrenches

Waterproof ExStik® II pH/Conductivity Meter

Note :   SINGPLAS does not do certificates for Ph Meters

Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode

• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F

• Memory stores up to 25 labeled readings

• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio

• RENEW feature alerts user when electrode needs replacement

• Auto power off and low battery indicator

• EC500 meter includes electrode, protective sensor cap, sample cup

with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.

Order Conductivity standards and pH buffers separately

Waterproof ExStik® II pH/Conductivity MeterNote : SINGPLAS does not do certificates for Ph MetersOther 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )Features:• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F• Analog bargraph indicates trends• Memory stores up to 25 labeled readings• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio• RENEW feature alerts user when electrode needs replacement• Auto power off and low battery indicator• Waterproof to IP57• EC500 meter includes electrode, protective sensor cap, sample cupwith cap, four 3V CR-2032 batteries, and 48&quot; (1.2m) neckstrap.Order Conductivity standards and pH buffers separately<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<ins>Waterproof ExStik® II pH/Conductivity Meter</ins>
<ins>Note : </ins> SINGPLAS does not do certificates for Ph Meters
Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )
<ins>Features:</ins>
• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Auto power off and low battery indicator
• Waterproof to IP57
• <ins>EC500 meter</ins> includes electrode, protective sensor cap, sample cup
with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.
Order Conductivity standards and pH buffers separately

 <div class="img-ctnr">
 <amp-img 
 on="tap:5m4as"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5m4as" 
 layout="nodisplay"></amp-image-lightbox>

Paul Ang

Others

Werner

STANLEY

MAKITA

BOSCH

Hitachi

KING'S

SHOWY

Hikoki

Other Tools

Other Construction

Ladders & Platforms

Grinders

Other Measuring Tools

Drills, Impact Drivers & Wrenches

Plumbing Tools & Equipment

Safety Shoes

Vehicle Accessories

Safety Gloves

PowerFit Industrial Pte Ltd

buyerIntroduction

Exstik® Ii pH/Conductivity Meter - Waterproof

exstik® ii ph/conductivity meter waterproof pengukur ph/konduktivitas tahan air flow ph meters aliran extech kalis extech/艾克泰克 ph/电导率计 防水 流量和ph计 艾克泰克

exstik-ii-ph-conductivity-meter-waterproof

ExStik® II pH/Conductivity Meter - waterproof

ExStik® II pH/Conductivity Meter - waterproof with Calibration Certificate

Options

Elora 2400-UDS 3 0.7-3.5 Nm Elometer Torque Wrench With Drag Indicator

Description:- Indicating torque wrench with dial gauge and drag indicator
for controlled tightening from 0,7 – 2800 Nm
measurement units: Nm, ft-lb or in-lb
with fixed head square Conforms to DIN 3120, ISO 1174
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety
the calibrated accuracy will be reached starting from 20% of the measuring range
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate

Elora 2400-UDS 9 1.8-9 Nm Elometer Torque Wrench 1/4″ Drive

Elora 2400-UDS 18 3.6-18 Nm Elometer Torque Wrench 3/8″ Drive

Elora 2400-UDS 30 6-30 Nm Elometer Torque Wrench 3/8″ Drive

Elora 2400-UDS 70 14-70 Nm Elometer Torque Wrench 3/8″ Drive

Elora 2400-UDS 240 48-240 Nm Elometer Torque Wrench 1/2″ Drive

Elora 2400-UDS 350 70-350 Nm Elometer Torque Wrench 1/2″ Drive

Elora 2400-UDS 480 96-480 Nm Elometer Torque Wrench 3/4″ Drive

<h3>Elora 2400-UDS 3 0.7-3.5 Nm Elometer Torque Wrench With Drag Indicator</h3>
<h3>Product code: 2400000032000 </h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/4″</li>
<li>Measuring range Nm:- 0,7-3,5</li>
<li>Measuring range in.lb.:- 11110</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,1</li>
<li>Graduation in.lb.:- 1</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 9 1.8-9 Nm Elometer Torque Wrench 1/4″ Drive</h3>
<h3>Product code: 2400000092000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/4″</li>
<li>Measuring range Nm:- 1,8-9</li>
<li>Measuring range in.lb.:- 15-75</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,2</li>
<li>Graduation in.lb.:- 1</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 18 3.6-18 Nm Elometer Torque Wrench 3/8″ Drive</h3>
<h3>Product code: 2400000182000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/8″</li>
<li>Measuring range Nm:- 3,6-18</li>
<li>Measuring range in.lb.:- 30-150</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,5</li>
<li>Graduation in.lb.:- 2</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 30 6-30 Nm Elometer Torque Wrench 3/8″ Drive</h3>
<h3>Product code: 2400000302000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/8″</li>
<li>Measuring range Nm:- 11110</li>
<li>Measuring range in.lb.:- 50-250</li>
<li>Measuring range ft.lb.:- –</li>
<li>Graduation Nm:- 0,5</li>
<li>Graduation in.lb.:- 5</li>
<li>Graduation ft.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 70 14-70 Nm Elometer Torque Wrench 3/8″ Drive</h3>
<h3>Product code: 2400000702000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/8″</li>
<li>Measuring range Nm:- 14-70</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 18537</li>
<li>Graduation Nm:- 2</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 1</li>
<li>Signal:- –</li>
<li>Length mm:- 270</li>
<li>Weight g:- 725</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 240 48-240 Nm Elometer Torque Wrench 1/2″ Drive</h3>
<h3>Product code: 2400002402000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/2″</li>
<li>Measuring range Nm:- 48-240</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 35-175</li>
<li>Graduation Nm:- 5</li>
<li>Graduation in.lb.:- –</li>
<li>Signal:- –</li>
<li>Length mm:- 560</li>
<li>Weight g:- 1400</li>
<li>Graduation in.lb.:- 5</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 350 70-350 Nm Elometer Torque Wrench 1/2″ Drive</h3>
<h3>Product code: 2400003502000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1/2″</li>
<li>Measuring range Nm:- 70-350</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 50-250</li>
<li>Graduation Nm:- 10</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 5</li>
<li>Signal:- –</li>
<li>Length mm:- 560</li>
<li>Weight g:- 1400</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 480 96-480 Nm Elometer Torque Wrench 3/4″ Drive</h3>
<h3>Product code: 2400004802000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/4″</li>
<li>Measuring range Nm:- 96-480</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 70-350</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 10</li>
<li>Signal:- –</li>
<li>Length mm:- 675</li>
<li>Weight g:- 3200</li>
<li>Graduation Nm:- 10</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 480 96-480 Nm Elometer Torque Wrench 3/4″ Drive</h3>
<h3>Product code: 2400004802000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/4″</li>
<li>Measuring range Nm:- 96-480</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 70-350</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 10</li>
<li>Signal:- –</li>
<li>Length mm:- 675</li>
<li>Weight g:- 3200</li>
<li>Graduation Nm:- 10</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 800 166-800 Nm Elometer Torque Wrench 3/4″ Drive</h3>
<h3>Product code: 2400008002000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 3/4″</li>
<li>Measuring range Nm:- 166-800</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 120-600</li>
<li>Graduation Nm:- 25</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 10</li>
<li>Signal:- –</li>
<li>Length mm:- 1180</li>
<li>Weight g:- 4500</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 1400 280-1400 Nm Elometer Torque Wrench 1″ Drive</h3>
<h3>Product code: 2400014002000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1”</li>
<li>Measuring range Nm:- 280-1400</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 200-1000</li>
<li>Graduation Nm:- 25</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 20</li>
<li>Signal:- optical and audible</li>
<li>Length mm:- 1970</li>
<li>Weight g:- 9000</li>
</ul>
&nbsp;
<h3>Elora 2400-UDS 2800 560-2800 Nm Elometer Torque Wrench 1″ Drive</h3>
<h3>Product code: 2400028002000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- Indicating torque wrench with dial gauge and drag indicator 
for controlled tightening from 0,7 – 2800 Nm 
measurement units: Nm, ft-lb or in-lb 
with fixed head square Conforms to DIN 3120, ISO 1174 
Elora No. 2400 UDS 1400 and 2400-UDS 2800 with additional audible buzzer 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+-6%, respectively +- 4%) for your safety 
the calibrated accuracy will be reached starting from 20% of the measuring range 
classified Conforms to DIN EN ISO 6789:2003 Type I Class B, with traceable factory calibration certificate</li>
<li>Output Male Square:- 1”</li>
<li>Measuring range Nm:- 560-2800</li>
<li>Measuring range in.lb.:- –</li>
<li>Measuring range ft.lb.:- 400-2000</li>
<li>Graduation Nm:- 50</li>
<li>Graduation in.lb.:- –</li>
<li>Graduation ft.lb.:- 40</li>
<li>Signal:- optical and audible</li>
<li>Length mm:- 3200</li>
<li>Weight g:- 21000</li>
</ul>