FLUKE

Test & Measurement

test-measurement

Calibrators

calibrators

Electrical Power Testing

electrical-power-testing

Insulation Testers

insulation-testers

Multimeters

multimeters

Pressure Measurement

pressure-measurement

Work-Station

work-station

Toolbags

toolbags

Fluke C799 Soft Carrying Case for Use With 753 Series

 Fluke 750 Series calibrators measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors, transmitters and other instruments. They source/simulate volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate transmitters. They can also: power transmitters during test, using loop supply with simultaneous mA measurement; measure/source pressure; create and run automated as-found/as-left procedures to satisfy quality programs or regulations; record and document results.
Fluke 750 Series calibrators can hold up to a full week of downloaded procedures and calibration results. They use features such as Autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing and programmable measurement delay. These instruments have a bright white dual display (3 settings) and multi-lingual interface (English, French, German, Spanish, Italian). They read both sourced and measured parameters simultaneously.


Calibrate temperature, pressure, voltage, current, resistance and frequency
3 operating modes: measure; source; simultaneous measure/source
Easy-to-follow, menu-driven display which guides users through tasks
Graphical display bright enough for readings to be seen in any light condition


The Fluke-753 (744-2524 ) and Fluke-754 (744-2527 ) share common features and capabilities but the Fluke-754 has, additionally, integrated HART communication functions, enabling users to monitor, control and calibrate HART instrumentation.

BC7240 battery charger
Li-on BP7240 battery pack
DPCTrack 2™ Sample Software
Instruction manual
NIST-traceable calibration report and data
Three sets of TP220 test probes with three sets of "extended tooth" alligator clips
Two sets AC280 hook clips
C799 Soft Field Case
USB communication cable, Fluke 754HHC HART communications cable 

<h3 class="md-block-header-three">Fluke C799 Soft Carrying Case for Use With 753 Series</h3> Fluke 750 Series calibrators measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors, transmitters and other instruments. They source/simulate volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate transmitters. They can also: power transmitters during test, using loop supply with simultaneous mA measurement; measure/source pressure; create and run automated as-found/as-left procedures to satisfy quality programs or regulations; record and document results. Fluke 750 Series calibrators can hold up to a full week of downloaded procedures and calibration results. They use features such as Autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing and programmable measurement delay. These instruments have a bright white dual display (3 settings) and multi-lingual interface (English, French, German, Spanish, Italian). They read both sourced and measured parameters simultaneously. <h3 class="md-block-header-three">Features and Benefits:</h3>Calibrate temperature, pressure, voltage, current, resistance and frequency 3 operating modes: measure; source; simultaneous measure/source Easy-to-follow, menu-driven display which guides users through tasks Graphical display bright enough for readings to be seen in any light condition <h3 class="md-block-header-three">Note</h3>The Fluke-753 (744-2524 ) and Fluke-754 (744-2527 ) share common features and capabilities but the Fluke-754 has, additionally, integrated HART communication functions, enabling users to monitor, control and calibrate HART instrumentation.<h3 class="md-block-header-three">Supplied with</h3>BC7240 battery charger Li-on BP7240 battery pack DPCTrack 2™ Sample Software Instruction manual NIST-traceable calibration report and data Three sets of TP220 test probes with three sets of &quot;extended tooth&quot; alligator clips Two sets AC280 hook clips C799 Soft Field Case USB communication cable, Fluke 754HHC HART communications cable

<h3>Fluke C799 Soft Carrying Case for Use With 753 Series</h3>
&nbsp;Fluke 750 Series calibrators measure volts, mA, RTDs, thermocouples, frequency and ohms to test sensors, transmitters and other instruments. They source/simulate volts, mA, thermocouples, RTDs, frequency, ohms and pressure to calibrate transmitters. They can also: power transmitters during test, using loop supply with simultaneous mA measurement; measure/source pressure; create and run automated as-found/as-left procedures to satisfy quality programs or regulations; record and document results. 
Fluke 750 Series calibrators can hold up to a full week of downloaded procedures and calibration results. They use features such as Autostep, custom units, user-entered values during test, one-point and two-point switch testing, square root DP flow testing and programmable measurement delay. These instruments have a bright white dual display (3 settings) and multi-lingual interface (English, French, German, Spanish, Italian). They read both sourced and measured parameters simultaneously. 

<h3>Features and Benefits:</h3>
Calibrate temperature, pressure, voltage, current, resistance and frequency 
3 operating modes: measure; source; simultaneous measure/source 
Easy-to-follow, menu-driven display which guides users through tasks 
Graphical display bright enough for readings to be seen in any light condition 

<h3>Note</h3>
The Fluke-753 (744-2524 ) and Fluke-754 (744-2527 ) share common features and capabilities but the Fluke-754 has, additionally, integrated HART communication functions, enabling users to monitor, control and calibrate HART instrumentation.
<h3>Supplied with</h3>
BC7240 battery charger 
Li-on BP7240 battery pack 
DPCTrack 2™ Sample Software 
Instruction manual 
NIST-traceable calibration report and data 
Three sets of TP220 test probes with three sets of "extended tooth" alligator clips 
Two sets AC280 hook clips 
C799 Soft Field Case 
USB communication cable, Fluke 754HHC HART communications cable&nbsp;

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke c799 soft carrying case use 753 series kotak pembawa lembut untuk digunakan dengan seri toolbags tas alat sarung siri beg peralatan fluke/福禄克 软便携包（适用于 系列） 工具袋 福禄克

fluke-c799-soft-carrying-case-for-use-with-753-series

 Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.


Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.


• 0.02% accuracy
• 24 V loop supply with mA measure
• Simultaneous mA and % of span display
• Selectable step/ramp outputs
• mA sourcing, simulation and measurement
• Compact case and protective holster
• Quick battery replacement


Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.


How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.


9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data

FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091

Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.


• Helpful for linearity checks thanks to its dedicated push button for 25% increments
• Switchable between stepped or ramped output to meet your application needs
• 9V battery is easy to change without opening the case and affecting the calibration seal
• 'Span check' function gives you speedily calculated results for zero and span measurements


• Test and measurement devices
• Research and development labs
• Electronics servicing


What's the benefit of this product's internal loop supply?

This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU. 

<h3 class="md-block-header-three">Fluke 705, 24mA Loop Calibrator</h3> Fluke&#x27;s integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool. Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips. <h3 class="md-block-header-three">Features and Benefits:</h3>• 0.02% accuracy • 24 V loop supply with mA measure • Simultaneous mA and % of span display • Selectable step/ramp outputs • mA sourcing, simulation and measurement • Compact case and protective holster • Quick battery replacement <h3 class="md-block-header-three">FAQ&#x27;s</h3><h3 class="md-block-header-three">What is a current loop calibrator?</h3>Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics. <h3 class="md-block-header-three">How much current flows in each loop of a parallel circuit?</h3>Determined by Ohm&#x27;s law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same. <h3 class="md-block-header-three">Supplied with</h3>9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data<h3 class="md-block-header-three">FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</h3>Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit&#x27;s tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it&#x27;s protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Helpful for linearity checks thanks to its dedicated push button for 25% increments • Switchable between stepped or ramped output to meet your application needs • 9V battery is easy to change without opening the case and affecting the calibration seal • &#x27;Span check&#x27; function gives you speedily calculated results for zero and span measurements <h3 class="md-block-header-three">Applications</h3>• Test and measurement devices • Research and development labs • Electronics servicing <h3 class="md-block-header-three">What&#x27;s the benefit of this product&#x27;s internal loop supply?</h3>This product&#x27;s 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.

<h3>Fluke 705, 24mA Loop Calibrator</h3>
&nbsp;Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool. 

Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips. 

<h3>Features and Benefits:</h3>
• 0.02% accuracy 
• 24 V loop supply with mA measure 
• Simultaneous mA and % of span display 
• Selectable step/ramp outputs 
• mA sourcing, simulation and measurement 
• Compact case and protective holster 
• Quick battery replacement 

<h3>FAQ's</h3>
<h3>What is a current loop calibrator?</h3>
Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics. 

<h3>How much current flows in each loop of a parallel circuit?</h3>
Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same. 

<h3>Supplied with</h3>
9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data
<h3>FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</h3>
Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings. 

<h3>Features &amp; Benefits</h3>
• Helpful for linearity checks thanks to its dedicated push button for 25% increments 
• Switchable between stepped or ramped output to meet your application needs 
• 9V battery is easy to change without opening the case and affecting the calibration seal 
• 'Span check' function gives you speedily calculated results for zero and span measurements 

<h3>Applications</h3>
• Test and measurement devices 
• Research and development labs 
• Electronics servicing 

<h3>What's the benefit of this product's internal loop supply?</h3>
This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.&nbsp;

Fluke 705, 24mA Loop Calibrator

fluke 705, 24ma loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 705，24ma 回路校准器 电力测试 福禄克

fluke-705-24ma-loop-calibrator

Fluke 289 FVF IR3000 Fluke 289 With IR3000FC and Fvf Software 

Fluke Connect® Compatibility: Now works with the Fluke Connect mobile app and all FC-enabled tools for enhanced remote collaboration.
 

ShareLive™ Video Call: Instantly share live measurements from the field via the app using the ir3000 FC wireless connector.
 

TrendCapture Display: Graphically presents logged data to easily identify anomalies and trends.
 

Selectable AC Filter: Smooths rapidly changing or noisy signals for more stable readings.
 

Adjustable Recording Thresholds: Set custom percentage changes to define new event triggers for auto hold and recording.
 

High-Resolution Display: Large 50,000-count ¼ VGA dot-matrix screen with white backlight for clear visibility.
 

Expanded Logging Memory: Allows unattended monitoring and multiple session storage before needing to download to a PC.
 

Precision Low-Ohms Measurement: Two-terminal 50 Ω range with 1 mΩ resolution and 10 mA current source.
 

Low Pass Filter: Ensures accurate simultaneous voltage and frequency readings in noisy environments like VFDs.
 

LoZ Voltage Function: Eliminates ghost voltages, improving accuracy in presence/absence power tests.
 

Integrated Help Screens: Onboard guidance for measurement functions increases ease-of-use.
 

Real-Time Clock: Automatically timestamps saved data for better traceability.
 

Relative Mode: Subtracts test lead resistance in low-ohm or capacitance measurements.
 

True-RMS Measurement: Ensures accuracy on non-linear signals for voltage and current.
 

High Current Capability: Measures up to 10 A continuous (20 A for 30 seconds).
 

Wide Capacitance Range: Up to 100 mF for thorough component testing.
 

Peak Capture: Records transients as fast as 250 μs.
 

Optional Magnetic Hanger: For hands-free operation in the field.

<h3 class="md-block-header-three">Fluke 289 FVF IR3000 Fluke 289 With IR3000FC and Fvf Software </h3>Features &amp; Benefits<ul class="md-block-unordered-list-item"><li>Fluke Connect® Compatibility: Now works with the Fluke Connect mobile app and all FC-enabled tools for enhanced remote collaboration. </li><li>ShareLive™ Video Call: Instantly share live measurements from the field via the app using the ir3000 FC wireless connector. </li><li>TrendCapture Display: Graphically presents logged data to easily identify anomalies and trends. </li><li>Selectable AC Filter: Smooths rapidly changing or noisy signals for more stable readings. </li><li>Adjustable Recording Thresholds: Set custom percentage changes to define new event triggers for auto hold and recording. </li><li>High-Resolution Display: Large 50,000-count ¼ VGA dot-matrix screen with white backlight for clear visibility. </li><li>Expanded Logging Memory: Allows unattended monitoring and multiple session storage before needing to download to a PC. </li><li>Precision Low-Ohms Measurement: Two-terminal 50 Ω range with 1 mΩ resolution and 10 mA current source. </li><li>Low Pass Filter: Ensures accurate simultaneous voltage and frequency readings in noisy environments like VFDs. </li><li>LoZ Voltage Function: Eliminates ghost voltages, improving accuracy in presence/absence power tests. </li><li>Integrated Help Screens: Onboard guidance for measurement functions increases ease-of-use. </li><li>Real-Time Clock: Automatically timestamps saved data for better traceability. </li><li>Relative Mode: Subtracts test lead resistance in low-ohm or capacitance measurements. </li><li>True-RMS Measurement: Ensures accuracy on non-linear signals for voltage and current. </li><li>High Current Capability: Measures up to 10 A continuous (20 A for 30 seconds). </li><li>Wide Capacitance Range: Up to 100 mF for thorough component testing. </li><li>Peak Capture: Records transients as fast as 250 μs. </li><li>Optional Magnetic Hanger: For hands-free operation in the field.</li></ul>

<h3>Fluke 289 FVF IR3000 Fluke 289 With IR3000FC and Fvf Software&nbsp;</h3>
Features &amp; Benefits
<ul>
<li>Fluke Connect® Compatibility: Now works with the Fluke Connect mobile app and all FC-enabled tools for enhanced remote collaboration. 
&nbsp;</li>
<li>ShareLive™ Video Call: Instantly share live measurements from the field via the app using the ir3000 FC wireless connector. 
&nbsp;</li>
<li>TrendCapture Display: Graphically presents logged data to easily identify anomalies and trends. 
&nbsp;</li>
<li>Selectable AC Filter: Smooths rapidly changing or noisy signals for more stable readings. 
&nbsp;</li>
<li>Adjustable Recording Thresholds: Set custom percentage changes to define new event triggers for auto hold and recording. 
&nbsp;</li>
<li>High-Resolution Display: Large 50,000-count ¼ VGA dot-matrix screen with white backlight for clear visibility. 
&nbsp;</li>
<li>Expanded Logging Memory: Allows unattended monitoring and multiple session storage before needing to download to a PC. 
&nbsp;</li>
<li>Precision Low-Ohms Measurement: Two-terminal 50 Ω range with 1 mΩ resolution and 10 mA current source. 
&nbsp;</li>
<li>Low Pass Filter: Ensures accurate simultaneous voltage and frequency readings in noisy environments like VFDs. 
&nbsp;</li>
<li>LoZ Voltage Function: Eliminates ghost voltages, improving accuracy in presence/absence power tests. 
&nbsp;</li>
<li>Integrated Help Screens: Onboard guidance for measurement functions increases ease-of-use. 
&nbsp;</li>
<li>Real-Time Clock: Automatically timestamps saved data for better traceability. 
&nbsp;</li>
<li>Relative Mode: Subtracts test lead resistance in low-ohm or capacitance measurements. 
&nbsp;</li>
<li>True-RMS Measurement: Ensures accuracy on non-linear signals for voltage and current. 
&nbsp;</li>
<li>High Current Capability: Measures up to 10 A continuous (20 A for 30 seconds). 
&nbsp;</li>
<li>Wide Capacitance Range: Up to 100 mF for thorough component testing. 
&nbsp;</li>
<li>Peak Capture: Records transients as fast as 250 μs. 
&nbsp;</li>
<li>Optional Magnetic Hanger: For hands-free operation in the field.</li>
</ul>

Fluke 289 FVF IR3000 Fluke 289 With IR3000FC and Fvf Software

fluke 289 fvf ir3000 ir3000fc software dengan dan perangkat lunak multimeters multimeter perisian fluke/福禄克 配备 软件 万用表 福禄克

fluke-289-fvf-ir3000-fluke-289-with-ir3000fc-and-fvf-software

 Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. It can calibrate a linear thermocouple transmitter with the mV source function and also measure mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings for performing quick, linearity checks.  

With the intelligent shutdown feature the Fluke 714B remembers settings when powered down so you can quickly replicate tests after powering back up. The calibrator also has one-year and two-year specifications, along with a traceable certificate of calibration. Combine that with its rugged construction, a backlit display, and easy to use interface

and you have an ideal test tool for temperature calibration professionals who want a highly accurate, single–function thermocouple temperature calibrator.  

Highly accurate, easy-to-use thermocouple temperature calibrator

Measures and simulates 17 thermocouple types and millivolts

Measures 4 to 20 mA signals while sourcing a temperature signal

Comes with a magnetic hanger for convenient hands-free operation

Features configurable source settings for quick linearity checks

Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals

Relative Humidity (% RH operating without condensation):

45% (40°C to 50°C) (Without condensation)

Vibration Requirements: MIL-T-28800E, Class 2

IP Rating: IEC 60529: IP52 (Protected against dust ingress, and protected against direct sprays of water up to 15 degrees from vertical)

Electromagnetic Environment: IEC 61326-1, Portable

Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2

Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries

<h3 class="md-block-header-three">Fluke 714B Thermocouple Calibrator</h3> Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. It can calibrate a linear thermocouple transmitter with the mV source function and also measure mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings for performing quick, linearity checks. With the intelligent shutdown feature the Fluke 714B remembers settings when powered down so you can quickly replicate tests after powering back up. The calibrator also has one-year and two-year specifications, along with a traceable certificate of calibration. Combine that with its rugged construction, a backlit display, and easy to use interfaceand you have an ideal test tool for temperature calibration professionals who want a highly accurate, single–function thermocouple temperature calibrator. <ul class="md-block-unordered-list-item"><li>Highly accurate, easy-to-use thermocouple temperature calibrator</li><li>Measures and simulates 17 thermocouple types and millivolts</li><li>Measures 4 to 20 mA signals while sourcing a temperature signal</li><li>Comes with a magnetic hanger for convenient hands-free operation</li><li>Features configurable source settings for quick linearity checks</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li><li>Operating Temperature: -10°C to 50°C</li><li>Storage Temperature: -30°C to 60°C</li><li>Operating Altitude: 2,000 m</li><li>Storage Altitude: 12,000 m</li><li>Relative Humidity (% RH operating without condensation):</li><ul class="md-block-unordered-list-item"><li>90% (10°C to 30°C)</li><li>75% (30°C to 40°C)</li><li>45% (40°C to 50°C) (Without condensation)</li></ul><li>Vibration Requirements: MIL-T-28800E, Class 2</li><li>Drop Test Requirements: 1 m</li><li>IP Rating: IEC 60529: IP52 (Protected against dust ingress, and protected against direct sprays of water up to 15 degrees from vertical)</li><li>Electromagnetic Environment: IEC 61326-1, Portable</li><li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li><li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li><li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li><li>Weight: 515 g</li></ul>

<h3>Fluke 714B Thermocouple Calibrator</h3>
&nbsp;Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. It can calibrate a linear thermocouple transmitter with the mV source function and also measure mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings for performing quick, linearity checks.&nbsp;&nbsp;
With the intelligent shutdown feature the Fluke 714B remembers settings when powered down so you can quickly replicate tests after powering back up. The calibrator also has one-year and two-year specifications, along with a traceable certificate of calibration. Combine that with its rugged construction, a backlit display, and easy to use interface
and you have an ideal test tool for temperature calibration professionals who want a highly accurate, single–function thermocouple temperature calibrator.&nbsp;&nbsp;
<ul>
<li>Highly accurate, easy-to-use thermocouple temperature calibrator</li>
<li>Measures and simulates 17 thermocouple types and millivolts</li>
<li>Measures 4 to 20 mA signals while sourcing a temperature signal</li>
<li>Comes with a magnetic hanger for convenient hands-free operation</li>
<li>Features configurable source settings for quick linearity checks</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li>
<li>Operating Temperature: -10°C to 50°C</li>
<li>Storage Temperature: -30°C to 60°C</li>
<li>Operating Altitude: 2,000 m</li>
<li>Storage Altitude: 12,000 m</li>
<li>Relative Humidity (% RH operating without condensation):</li>
<ul>
<li>90% (10°C to 30°C)</li>
<li>75% (30°C to 40°C)</li>
<li>45% (40°C to 50°C) (Without condensation)</li>
</ul>
<li>Vibration Requirements: MIL-T-28800E, Class 2</li>
<li>Drop Test Requirements: 1 m</li>
<li>IP Rating: IEC 60529: IP52 (Protected against dust ingress, and protected against direct sprays of water up to 15 degrees from vertical)</li>
<li>Electromagnetic Environment: IEC 61326-1, Portable</li>
<li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li>
<li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li>
<li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li>
<li>Weight: 515 g</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Other Measuring Tools

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

Fluke 714B Thermocouple Calibrator

fluke 714b thermocouple calibrator kalibrator termokopel calibrators fluke/福禄克 热电偶校准器 福禄克

fluke-714b-thermocouple-calibrator

 Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.  

Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator. 

Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator

Measures and simulates 13 different RTD types and resistance

Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal

Comes with a magnetic hanging tool designed in for convenient hands-free operation

Features configurable 0% and 100% source settings for quick 25% linearity checks

Dual inputs and backlit display for easy interpretation of measurements

Remembers power down settings to easily restart tests when powered up

Provides linear ramp and 25% step auto ramp based on 0% and 100% settings

Provides one-year and two-year specifications and traceable certification of calibration 

IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)

<h3 class="md-block-header-three">Fluke 712B Rtd Calibrators</h3> Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings. Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator. <ul class="md-block-unordered-list-item"><li>Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator</li><li>Measures and simulates 13 different RTD types and resistance</li><li>Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal</li><li>Comes with a magnetic hanging tool designed in for convenient hands-free operation</li><li>Features configurable 0% and 100% source settings for quick 25% linearity checks</li></ul>Other useful features:<ul class="md-block-unordered-list-item"><li>Dual inputs and backlit display for easy interpretation of measurements</li><li>Remembers power down settings to easily restart tests when powered up</li><li>Provides linear ramp and 25% step auto ramp based on 0% and 100% settings</li><li>Provides one-year and two-year specifications and traceable certification of calibration </li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li><li>Operating Temperature: -10°C to 50°C</li><li>Storage Temperature: -30°C to 60°C</li><li>Operating Altitude: 2,000 m</li><li>Storage Altitude: 12,000 m</li><li>Relative Humidity (% RH operating without condensation):</li><ul class="md-block-unordered-list-item"><li>90% (10°C to 30°C)</li><li>75% (30°C to 40°C)</li><li>45% (40°C to 50°C)</li></ul><li>Vibration Requirements: MIL-T-28800E, Class 2</li><li>Drop Test Requirements: 1 m</li><li>IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)</li><li>Electromagnetic Environment: IEC 61326-1, Portable</li><li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li><li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li><li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li><li>Weight: 515 g</li></ul>

<h3>Fluke 712B Rtd Calibrators</h3>
&nbsp;Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.&nbsp;&nbsp;
Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator.&nbsp;
<ul>
<li>Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator</li>
<li>Measures and simulates 13 different RTD types and resistance</li>
<li>Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal</li>
<li>Comes with a magnetic hanging tool designed in for convenient hands-free operation</li>
<li>Features configurable 0% and 100% source settings for quick 25% linearity checks</li>
</ul>
Other useful features:
<ul>
<li>Dual inputs and backlit display for easy interpretation of measurements</li>
<li>Remembers power down settings to easily restart tests when powered up</li>
<li>Provides linear ramp and 25% step auto ramp based on 0% and 100% settings</li>
<li>Provides one-year and two-year specifications and traceable certification of calibration&nbsp;</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li>
<li>Operating Temperature: -10°C to 50°C</li>
<li>Storage Temperature: -30°C to 60°C</li>
<li>Operating Altitude: 2,000 m</li>
<li>Storage Altitude: 12,000 m</li>
<li>Relative Humidity (% RH operating without condensation):</li>
<ul>
<li>90% (10°C to 30°C)</li>
<li>75% (30°C to 40°C)</li>
<li>45% (40°C to 50°C)</li>
</ul>
<li>Vibration Requirements: MIL-T-28800E, Class 2</li>
<li>Drop Test Requirements: 1 m</li>
<li>IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)</li>
<li>Electromagnetic Environment: IEC 61326-1, Portable</li>
<li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li>
<li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li>
<li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li>
<li>Weight: 515 g</li>
</ul>

Fluke 712B Rtd Calibrators

fluke 712b rtd calibrators kalibrator penentukuran fluke/福禄克 校准器 福禄克

fluke-712b-rtd-calibrators

 The Fluke RTD temperature calibrator is an ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use and single-function temperature calibrator.

The Fluke RTD temperature calibrator can measure and simulate 17 different thermocouples types and resistance
Measure 4mA to 20mA signals while simultaneously sourcing a temperature signal
Hanging tool included with every unit
Configurable 0% and 100% source settings for quick 25% linearity checks
Linear ramp and 25% step auto ramp based on 0% and 100% settings
Dual input and backlit display for easy interpretation of measurements
Power down settings remembered at power up for easy restart of tests
1-year and 2-year specifications and traceable certificate of calibration

Process control automation
Manufacturing
Instrumentation

<h3 class="md-block-header-three">Fluke FLUKE-712B Temperature Calibrator</h3><ul class="md-block-unordered-list-item"><li>Model Number p	712B</li><li>Width	84mm</li><li>Length	188.5mm</li><li>Weight	515g</li><li>Height	52.5mm</li></ul> The Fluke RTD temperature calibrator is an ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use and single-function temperature calibrator.Features and BenefitsThe Fluke RTD temperature calibrator can measure and simulate 17 different thermocouples types and resistance Measure 4mA to 20mA signals while simultaneously sourcing a temperature signal Hanging tool included with every unit Configurable 0% and 100% source settings for quick 25% linearity checks Linear ramp and 25% step auto ramp based on 0% and 100% settings Dual input and backlit display for easy interpretation of measurements Power down settings remembered at power up for easy restart of tests 1-year and 2-year specifications and traceable certificate of calibrationApplicationsProcess control automation Manufacturing InstrumentationCertificationsIP52 rated IEC 61326-1 IEC 61010-1

<h3>Fluke FLUKE-712B Temperature Calibrator</h3>
<ul>
<li>Model Number p	712B</li>
<li>Width	84mm</li>
<li>Length	188.5mm</li>
<li>Weight	515g</li>
<li>Height	52.5mm</li>
</ul>
&nbsp;The Fluke RTD temperature calibrator is an ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use and single-function temperature calibrator.
Features and Benefits
The Fluke RTD temperature calibrator can measure and simulate 17 different thermocouples types and resistance 
Measure 4mA to 20mA signals while simultaneously sourcing a temperature signal 
Hanging tool included with every unit 
Configurable 0% and 100% source settings for quick 25% linearity checks 
Linear ramp and 25% step auto ramp based on 0% and 100% settings 
Dual input and backlit display for easy interpretation of measurements 
Power down settings remembered at power up for easy restart of tests 
1-year and 2-year specifications and traceable certificate of calibration
Applications
Process control automation 
Manufacturing 
Instrumentation
Certifications
IP52 rated 
IEC 61326-1 
IEC 61010-1&nbsp;

Fluke 712B and 714B Temperature Calibrators Data Sheet

Fluke FLUKE-712B Temperature Calibrator

fluke fluke-712b temperature calibrator kalibrator suhu calibrators penentukuran 福禄克 fluke/福禄克 -712b 温度校准器

fluke-fluke-712b-temperature-calibrator

FLUKE 719 30G -850mbar to 2.4bar Pressure Calibrator

Built-in electric pump
Best in class pressure measurement uncertainty of 0.025%
Measure and source mA with best in class 0.015% accuracy
Relative humidity 95% (-10 → 30 °C), 75% (30 → 40 °C), 45% (40 → 50 °C), 35% (50 → 55 °C)
Precision pressure adjust vernier
Variable release rate bleed valve for easy pressure adjustment
Ideal performance for high accuracy transmitter calibration
Programmable pump limit eliminates over-pressurization and allows user to program target pressures for pumping
Extended pressure measurement range with any of 29 700Pxx pressure modules
Source mA with simultaneous pressure measurement to test valves and I/Ps
Simulate mA signals to troubleshoot 4-20 mA loops
Test pressure switches with built-in switch test function
Power transmitters during test using 24V loop supply with simultaneous mA measurement
Proven cleanout ports reduce pump failures
Compact (210mm H x 87mm W x 60mm D) and lightweight (0.912kg)

Warranty is 3 years (pressure calibrator), 1 year (pump)

NIST traceable certification, TL75 test leads, AC72 alligator clip set, push-fit connectors (1/8" NPT male connectors), translucent test hose, product overview manual (printed), user’s manual (CD-ROM in 14 languages), two 9V alkaline batteries, yellow holster 

<h3 class="md-block-header-three">FLUKE 719 30G -850mbar to 2.4bar Pressure Calibrator</h3><ul class="md-block-unordered-list-item"><li>Maximum Pressure Measurement	2.4bar</li><li>Minimum Pressure Measurement	-850mbar</li><li>Resolution	0.1 mbar</li><li>Model Number p	719</li><li>Current Loop Measurement	Yes</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Weight	912g</li><li>Dimensions	210 x 87 x 60mm</li><li>Height	60mm</li><li>Length	210mm</li><li>Width	87mm</li></ul>Built-in electric pump Best in class pressure measurement uncertainty of 0.025% Measure and source mA with best in class 0.015% accuracy Relative humidity 95% (-10 → 30 °C), 75% (30 → 40 °C), 45% (40 → 50 °C), 35% (50 → 55 °C) Precision pressure adjust vernier Variable release rate bleed valve for easy pressure adjustment Ideal performance for high accuracy transmitter calibration Programmable pump limit eliminates over-pressurization and allows user to program target pressures for pumping Extended pressure measurement range with any of 29 700Pxx pressure modules Source mA with simultaneous pressure measurement to test valves and I/Ps Simulate mA signals to troubleshoot 4-20 mA loops Test pressure switches with built-in switch test function Power transmitters during test using 24V loop supply with simultaneous mA measurement Proven cleanout ports reduce pump failures Compact (210mm H x 87mm W x 60mm D) and lightweight (0.912kg)NoteWarranty is 3 years (pressure calibrator), 1 year (pump)ApprovalsCSAStandardsEN50082-1:1992 and EN55022:1994 Class BSupplied withNIST traceable certification, TL75 test leads, AC72 alligator clip set, push-fit connectors (1/8&quot; NPT male connectors), translucent test hose, product overview manual (printed), user’s manual (CD-ROM in 14 languages), two 9V alkaline batteries, yellow holster

<h3>FLUKE 719 30G -850mbar to 2.4bar Pressure Calibrator</h3>
<ul>
<li>Maximum Pressure Measurement	2.4bar</li>
<li>Minimum Pressure Measurement	-850mbar</li>
<li>Resolution	0.1 mbar</li>
<li>Model Number p	719</li>
<li>Current Loop Measurement	Yes</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Weight	912g</li>
<li>Dimensions	210 x 87 x 60mm</li>
<li>Height	60mm</li>
<li>Length	210mm</li>
<li>Width	87mm</li>
</ul>
Built-in electric pump 
Best in class pressure measurement uncertainty of 0.025% 
Measure and source mA with best in class 0.015% accuracy 
Relative humidity 95% (-10 → 30 °C), 75% (30 → 40 °C), 45% (40 → 50 °C), 35% (50 → 55 °C) 
Precision pressure adjust vernier 
Variable release rate bleed valve for easy pressure adjustment 
Ideal performance for high accuracy transmitter calibration 
Programmable pump limit eliminates over-pressurization and allows user to program target pressures for pumping 
Extended pressure measurement range with any of 29 700Pxx pressure modules 
Source mA with simultaneous pressure measurement to test valves and I/Ps 
Simulate mA signals to troubleshoot 4-20 mA loops 
Test pressure switches with built-in switch test function 
Power transmitters during test using 24V loop supply with simultaneous mA measurement 
Proven cleanout ports reduce pump failures 
Compact (210mm H x 87mm W x 60mm D) and lightweight (0.912kg)
Note
Warranty is 3 years (pressure calibrator), 1 year (pump)
Approvals
CSA
Standards
EN50082-1:1992 and EN55022:1994 Class B
Supplied with
NIST traceable certification, TL75 test leads, AC72 alligator clip set, push-fit connectors (1/8" NPT male connectors), translucent test hose, product overview manual (printed), user’s manual (CD-ROM in 14 languages), two 9V alkaline batteries, yellow holster&nbsp;

Fluke 719 Electric Pressure Calibrator Data Sheet

Fluke 719 Pressure Calibrator with Electric Pump Users Manual

fluke 719 30g -850mbar 2.4bar pressure calibrator kalibrator tekanan 850mbar hingga 2,4bar measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-719-30g-850mbar-to-2-4bar-pressure-calibrator

Fluke 1550C/KIT Insulation Tester, 250V Min, 5000V Max, 1TΩ Max, Cat Iii 1000V

Maximum Insulation Resistance Measurement	1TΩ

Battery Type	Rechargeable Lead Acid (Yuasa NP2.8-12)

Safety Category	CAT III 1000 V, CAT IV 600V

 The Fluke 1T ohm electrical insulation tester is a perfect tool for preventive or predictive maintenance programs. It is designed to identify potential equipment failures before they occur. Remote operation lets you spend as little time as possible in potentially hazardous zones. It is a high voltage insulation tester, ideal for testing high voltage equipment including switchgear, motors, generators and cables. The testing voltage ranges between 250V and 5000V. This device is Rechargeable Lead Acid (Yuasa NP2.8-12) battery-powered. The kit includes a hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clips.


Supplied with Test cables & crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM.
Fluke 1550 & 1555 kits include case, NIST traceable certificate of calibration and additional ruggedized crocodile clips.

99 measurements storage and recall and PC interface
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI)
Capacitance and leakage current measurement
Guard system eliminates the effect of surface leakage current on high resistance measurements
Large LCD display with analogue bar graph
Long life lead acid battery with over 750 tests between charges
Ramp function for breakdown testing
Timer settings up to 99 minutes for timed tests
Voltage breakdown detection alerts and voltage reading up to 600VAC or DC for increased user safety

CAT III 1000V
CAT IV 1000V
CE certified
CSA certified
EN 61010 safety rating
IEEE 43-2000
IP40 rated 

<h3 class="md-block-header-three">Fluke 1550C/KIT Insulation Tester, 250V Min, 5000V Max, 1TΩ Max, Cat Iii 1000V</h3><ul class="md-block-unordered-list-item"><li>Model Number p	1550C</li><li>Tester Type	Insulation Tester</li><li>Maximum Test Voltage	5000V</li><li>Minimum Test Voltage	250V</li><li>Maximum Insulation Resistance Measurement	1TΩ</li><li>Display Type	LCD</li><li>Test Current	1 nA → 2 mA</li><li>Power Source	Battery</li><li>Battery Type	Rechargeable Lead Acid (Yuasa NP2.8-12)</li><li>Battery Life	750 Tests</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+50°C</li><li>Safety Category Level	CAT III, CAT IV</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Voltage	600 V, 1000 V</li><li>Weight	3.7kg</li><li>Plug Type	Type G - British 3-pin</li><li>Height	160mm</li><li>Dimensions	277 x 269 x 160mm</li><li>Length	277mm</li><li>Width	269mm</li></ul> The Fluke 1T ohm electrical insulation tester is a perfect tool for preventive or predictive maintenance programs. It is designed to identify potential equipment failures before they occur. Remote operation lets you spend as little time as possible in potentially hazardous zones. It is a high voltage insulation tester, ideal for testing high voltage equipment including switchgear, motors, generators and cables. The testing voltage ranges between 250V and 5000V. This device is Rechargeable Lead Acid (Yuasa NP2.8-12) battery-powered. The kit includes a hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clips. Supplied with Test cables &amp; crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM. Fluke 1550 &amp; 1555 kits include case, NIST traceable certificate of calibration and additional ruggedized crocodile clips.Features and Benefits99 measurements storage and recall and PC interface Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) Capacitance and leakage current measurement Guard system eliminates the effect of surface leakage current on high resistance measurements Large LCD display with analogue bar graph Long life lead acid battery with over 750 tests between charges Ramp function for breakdown testing Timer settings up to 99 minutes for timed tests Voltage breakdown detection alerts and voltage reading up to 600VAC or DC for increased user safetyCertificationsCAT III 1000V CAT IV 1000V CE certified CSA certified EN 61010 safety rating IEEE 43-2000 IP40 rated

<h3>Fluke 1550C/KIT Insulation Tester, 250V Min, 5000V Max, 1TΩ Max, Cat Iii 1000V</h3>
<ul>
<li>Model Number p	1550C</li>
<li>Tester Type	Insulation Tester</li>
<li>Maximum Test Voltage	5000V</li>
<li>Minimum Test Voltage	250V</li>
<li>Maximum Insulation Resistance Measurement	1TΩ</li>
<li>Display Type	LCD</li>
<li>Test Current	1 nA → 2 mA</li>
<li>Power Source	Battery</li>
<li>Battery Type	Rechargeable Lead Acid (Yuasa NP2.8-12)</li>
<li>Battery Life	750 Tests</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Voltage	600 V, 1000 V</li>
<li>Weight	3.7kg</li>
<li>Plug Type	Type G - British 3-pin</li>
<li>Height	160mm</li>
<li>Dimensions	277 x 269 x 160mm</li>
<li>Length	277mm</li>
<li>Width	269mm</li>
</ul>
&nbsp;The Fluke 1T ohm electrical insulation tester is a perfect tool for preventive or predictive maintenance programs. It is designed to identify potential equipment failures before they occur. Remote operation lets you spend as little time as possible in potentially hazardous zones. It is a high voltage insulation tester, ideal for testing high voltage equipment including switchgear, motors, generators and cables. The testing voltage ranges between 250V and 5000V. This device is Rechargeable Lead Acid (Yuasa NP2.8-12) battery-powered. The kit includes a hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clips. 

Supplied with Test cables &amp; crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM. 
Fluke 1550 &amp; 1555 kits include case, NIST traceable certificate of calibration and additional ruggedized crocodile clips.
Features and Benefits
99 measurements storage and recall and PC interface 
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) 
Capacitance and leakage current measurement 
Guard system eliminates the effect of surface leakage current on high resistance measurements 
Large LCD display with analogue bar graph 
Long life lead acid battery with over 750 tests between charges 
Ramp function for breakdown testing 
Timer settings up to 99 minutes for timed tests 
Voltage breakdown detection alerts and voltage reading up to 600VAC or DC for increased user safety
Certifications
CAT III 1000V 
CAT IV 1000V 
CE certified 
CSA certified 
EN 61010 safety rating 
IEEE 43-2000 
IP40 rated&nbsp;

Fluke 1555 and 1550C Insulation Resistance Testers Technical Data

Contains SVHC - Lead - CAS No. 7439-92-1

fluke 1550c/kit insulation tester, 250v min, 5000v max, 1tω cat iii 1000v alat uji isolasi 1550c/kit, min 250v, maks 5000v, 1tω, testers penguji penebat maks, fluke/福禄克 绝缘测试仪，最小 250v，最大 5000v，最大 1tω，cat 福禄克

fluke-1550c-kit-insulation-tester-250v-min-5000v-max-1t-max-cat-iii-1000v

Fluke 1555 Insulation Tester, 250V Min, 10000V Max, 2TΩ Max, Cat Iii 1000V

Maximum Insulation Resistance Measurement	2TΩ

 High voltage insulation tester ideal for testing high voltage equipment including switchgear, motors, generators and cables.
Meets requirements of IEEE 43-2000
Capacitance and leakage current measurement
Resistance measurements up to 2TΩ (Fluke 1555)
Ramp function for breakdown testing
Voltage breakdown detection alerts and voltage reading up to 600 V ac or dc for increased user safety
99 measurements storage and recall and PC interface
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI)
Timer settings up to 99 minutes for timed tests
Guard system eliminates the effect of surface leakage current on high-resistance measurements
Large LCD display with analogue bargraph
Long life lead acid battery with over 750 tests between charges
EN 61010 safety rating CAT IV 1000 V, CAT III 1000 V

Test cables & crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM, soft carrying case (Fluke 1555 only)
Fluke 1550 & 1555 kits include: IP67 hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clip

FLUKE Insulation Tester, 250V to 10kV DC Voltage Testing Range, Battery Powered - FLUKE 1555

Make sure your high-voltage equipment scores top marks with this insulation tester from FLUKE. It helps you take charge of electrical maintenance by measuring capacitance and leakage current. This lets you identify potential failures before they occur, so you can be sure your system is operating safely and at peak performance. Thanks to a long-lasting lead-acid battery, this dynamic device is good for 750 tests between charges, so you won't run out of juice in the middle of an important job. For maximum efficiency, it calculates the dielectric absorption and polarisation index automatically to give you all the information you need for accurate analysis. A large, easy-to-read LCD display means you can check your results in the blink of an eye.

• Wide operating temperature range between -20°C and +50°C for use in harsh conditions
• Light weight of 3.7kg for easy portability
• Broad voltage testing range between 250V and 10kV DC for versatility

• Switchgear testing
• Cable maintenance 

<h3 class="md-block-header-three">Fluke 1555 Insulation Tester, 250V Min, 10000V Max, 2TΩ Max, Cat Iii 1000V</h3><ul class="md-block-unordered-list-item"><li>Model Number p	1555</li><li>Tester Type	Insulation Tester</li><li>Maximum Test Voltage	10000V</li><li>Minimum Test Voltage	250V</li><li>Maximum Insulation Resistance Measurement	2TΩ</li><li>Display Type	LCD</li><li>Test Current	1 nA → 2 mA</li><li>Battery Type	Rechargeable Lead Acid (Yuasa NP2.8-12)</li><li>Battery Life	750 Tests</li><li>Power Source	Battery</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+50°C</li><li>Safety Category Voltage	1000 V, 600 V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li><li>Length	277mm</li><li>Width	269mm</li><li>Height	160mm</li><li>Weight	3.7kg</li><li>Dimensions	277 x 269 x 160mm</li></ul> High voltage insulation tester ideal for testing high voltage equipment including switchgear, motors, generators and cables. Meets requirements of IEEE 43-2000 Capacitance and leakage current measurement Resistance measurements up to 2TΩ (Fluke 1555) Ramp function for breakdown testing Voltage breakdown detection alerts and voltage reading up to 600 V ac or dc for increased user safety 99 measurements storage and recall and PC interface Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) Timer settings up to 99 minutes for timed tests Guard system eliminates the effect of surface leakage current on high-resistance measurements Large LCD display with analogue bargraph Long life lead acid battery with over 750 tests between charges EN 61010 safety rating CAT IV 1000 V, CAT III 1000 VSupplied withTest cables &amp; crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM, soft carrying case (Fluke 1555 only) Fluke 1550 &amp; 1555 kits include: IP67 hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clipFLUKE Insulation Tester, 250V to 10kV DC Voltage Testing Range, Battery Powered - FLUKE 1555Make sure your high-voltage equipment scores top marks with this insulation tester from FLUKE. It helps you take charge of electrical maintenance by measuring capacitance and leakage current. This lets you identify potential failures before they occur, so you can be sure your system is operating safely and at peak performance. Thanks to a long-lasting lead-acid battery, this dynamic device is good for 750 tests between charges, so you won&#x27;t run out of juice in the middle of an important job. For maximum efficiency, it calculates the dielectric absorption and polarisation index automatically to give you all the information you need for accurate analysis. A large, easy-to-read LCD display means you can check your results in the blink of an eye.Features &amp; Benefits• Wide operating temperature range between -20°C and +50°C for use in harsh conditions • Light weight of 3.7kg for easy portability • Broad voltage testing range between 250V and 10kV DC for versatilityApplications• Switchgear testing • Cable maintenance

<h3>Fluke 1555 Insulation Tester, 250V Min, 10000V Max, 2TΩ Max, Cat Iii 1000V</h3>
<ul>
<li>Model Number p	1555</li>
<li>Tester Type	Insulation Tester</li>
<li>Maximum Test Voltage	10000V</li>
<li>Minimum Test Voltage	250V</li>
<li>Maximum Insulation Resistance Measurement	2TΩ</li>
<li>Display Type	LCD</li>
<li>Test Current	1 nA → 2 mA</li>
<li>Battery Type	Rechargeable Lead Acid (Yuasa NP2.8-12)</li>
<li>Battery Life	750 Tests</li>
<li>Power Source	Battery</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Safety Category Voltage	1000 V, 600 V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Length	277mm</li>
<li>Width	269mm</li>
<li>Height	160mm</li>
<li>Weight	3.7kg</li>
<li>Dimensions	277 x 269 x 160mm</li>
</ul>
&nbsp;High voltage insulation tester ideal for testing high voltage equipment including switchgear, motors, generators and cables. 
Meets requirements of IEEE 43-2000 
Capacitance and leakage current measurement 
Resistance measurements up to 2TΩ (Fluke 1555) 
Ramp function for breakdown testing 
Voltage breakdown detection alerts and voltage reading up to 600 V ac or dc for increased user safety 
99 measurements storage and recall and PC interface 
Automatic calculation of Dielectric Absorption (DAR) and Polarization Index (PI) 
Timer settings up to 99 minutes for timed tests 
Guard system eliminates the effect of surface leakage current on high-resistance measurements 
Large LCD display with analogue bargraph 
Long life lead acid battery with over 750 tests between charges 
EN 61010 safety rating CAT IV 1000 V, CAT III 1000 V
Supplied with
Test cables &amp; crocodile clips, infrared USB adaptor, AC power cord, 12V lead acid battery (fitted), FlukeView Forms Basic Software, user manual on CD-ROM, soft carrying case (Fluke 1555 only) 
Fluke 1550 &amp; 1555 kits include: IP67 hard case, NIST traceable certificate of calibration and additional ruggedized crocodile clip
FLUKE Insulation Tester, 250V to 10kV DC Voltage Testing Range, Battery Powered - FLUKE 1555
Make sure your high-voltage equipment scores top marks with this insulation tester from FLUKE. It helps you take charge of electrical maintenance by measuring capacitance and leakage current. This lets you identify potential failures before they occur, so you can be sure your system is operating safely and at peak performance. Thanks to a long-lasting lead-acid battery, this dynamic device is good for 750 tests between charges, so you won't run out of juice in the middle of an important job. For maximum efficiency, it calculates the dielectric absorption and polarisation index automatically to give you all the information you need for accurate analysis. A large, easy-to-read LCD display means you can check your results in the blink of an eye.
Features &amp; Benefits
• Wide operating temperature range between -20°C and +50°C for use in harsh conditions 
• Light weight of 3.7kg for easy portability 
• Broad voltage testing range between 250V and 10kV DC for versatility
Applications
• Switchgear testing 
• Cable maintenance&nbsp;

Brochure - Insulation Resistance Testing

fluke 1555 insulation tester, 250v min, 10000v max, 2tω cat iii 1000v alat uji isolasi 1555, min 250v, maks 10000v, 2tω, testers penguji penebat maks, fluke/福禄克 绝缘测试仪，最小 250v，最大 10000v，最大 2tω，cat 福禄克