Iwata

Precision Brand

RS Pro

Mechanical Parts

mechanical-parts

Ball Bearings

ball-bearings

Machinery Parts

machinery-parts

Linear Stopper

linear-stopper

Oil Seals

oil-seals

Fasteners

fasteners

Pins

pins

Screw & Bolt Kits 

screw-bolt-kits

Construction

construction

Shim

shim

Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. 

Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. 

Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. 

What competitive advantage does Precision Brand® Slotted Shim offer?

Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. 

Why are thickness tolerances so important?

Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.

Aren’t all precut slotted shims marked with an “actual” thickness?

No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.

What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?

There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:

Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)

Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.

How do I know that I am getting the best?

Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!

Thickness 0.001, 0.003, 0.005, 0.010, 0.015, 0.020, 0.025 and 0.075 Inch

Quantity Per Package: 80 Pieces (10 pieces for each thickness)

<p class="md-block-unstyled">Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation. </p><p class="md-block-unstyled">Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal. </p><p class="md-block-unstyled">Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims. </p><p class="md-block-unstyled"><strong class="md-inline-bold">What competitive advantage does Precision Brand® Slotted Shim offer?</strong></p><p class="md-block-unstyled">Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®. </p><p class="md-block-unstyled"><strong class="md-inline-bold">Why are thickness tolerances so important?</strong></p><p class="md-block-unstyled">Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.</p><p class="md-block-unstyled"><strong class="md-inline-bold">Aren’t all precut slotted shims marked with an “actual” thickness?</strong></p><p class="md-block-unstyled">No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.</p><p class="md-block-unstyled"><strong class="md-inline-bold">What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?</strong></p><p class="md-block-unstyled">There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:</p><p class="md-block-unstyled">Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)</p><p class="md-block-unstyled">Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.</p><p class="md-block-unstyled"><strong class="md-inline-bold">How do I know that I am getting the best?</strong></p><p class="md-block-unstyled">Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!</p><p class="md-block-unstyled">Product Description: Precut Slotted Shim</p><p class="md-block-unstyled">Material: 300 Series Stainless Steel</p><p class="md-block-unstyled">Size: A (2 Inch x 2 Inch)</p><p class="md-block-unstyled">Length A: 2 Inch</p><p class="md-block-unstyled">Thickness 0.001, 0.003, 0.005, 0.010, 0.015, 0.020, 0.025 and 0.075 Inch</p><p class="md-block-unstyled">Groove G: 5/8 Inch</p><p class="md-block-unstyled">For Bolt Size: 5/8 UNC or UNF</p><p class="md-block-unstyled">Quantity Per Package: 80 Pieces (10 pieces for each thickness)</p><p class="md-block-unstyled">Packaging Weight: 1.67 kg</p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p>

<p>Precision Brand® precut slotted shims are made from a 300 series stainless steel that resists rust and corrosion. Precut shims have tabs that makes shim placement easier and safer, while eliminating the need to place hands under the machinery during installation or removal of shim. Each 2 Inch x 2 Inch motor shim has a slot size of 16mm and can be used for bolt sizes up to a maximum of 5/8 Inch. Each shim is marked with thickness in metric. Precision Brand® slotted shim is the best way to solve alignment and leveling problems on motors, pumps, generators, and other plant machinery. Precut slotted shims are economical, safe, and accurate. Reduce labor costs by eliminating hand cutting and reduce downtime by eliminating shim preparation.&nbsp;</p>
<p>Precut slotted shims save money. Precuts decrease time and labor costs and ultimately reduce machine downtime. Precuts also eliminate the work involved in the hand cutting, flattening and deburring of shim stock. Precision Brand Slotted Shim is made of a corrosive resistant, stainless steel. These shims are made with a tab which allows for safe and easy installation and removal.&nbsp;</p>
<p>Any manufacturing plant that has numerous pumps and motors, which are maintained on a routine schedule, will benefit from them. Paper mills, refineries, utilities, food processors and large OEMs have experienced cost savings by using precut slotted shims. Industries that have developed predictive maintenance programs (using laser alignment and/or vibration analysis equipment) have found both time and cost savings with precut slotted shims.&nbsp;</p>
<p><strong>What competitive advantage does Precision Brand® Slotted Shim offer?</strong></p>
<p>Precision Brand realizes that quality and thickness tolerances are the two most important considerations when manufacturing shims. PBP publishes and guarantees thickness tolerances that are tighter than any other shim on the market and that are superior to the industry standards. Our material is produced using special gauge charts that require special millruns. This assures your customers of the tightest tolerances and the highest quality when using Precision Brand®.&nbsp;</p>
<p><strong>Why are thickness tolerances so important?</strong></p>
<p>Think about it. If you are using precision alignment equipment to determine the soft foot (gap) under a motor foot, you will want to install shims that are as close as possible to that gap’s thickness. With our guaranteed thickness they will be “right-on” when you do that final check. This will save time of having to do another measurement rotation.</p>
<p><strong>Aren’t all precut slotted shims marked with an “actual” thickness?</strong></p>
<p>No, the thickness marked on most shims is just nominally close. Nominally close can be defined as whatever thickness tolerance is acceptable to that manufacturer. This means that the thickness can vary considerably from what is marked on the shim. Using Precision Brand® shims gives your customers the advantage. Remember that PBP is the only shim manufacturer to publish and guarantee slotted shim tolerances.</p>
<p><strong>What about shims that claim to be marked with an “exact” thickness like .098 instead of .100?</strong></p>
<p>There are two things to remember when working with these shims. First, the off-size marking is probably not correct due to the variations that occur in the stainless steel rolling process. The only way this marking could be correct would be if each shim was measured and stamped individually. As you can realize, this is neither feasible nor economically possible for any shim manufacturer. Beware whenever you encounter a shim with a non-standard, “off-size” decimal thickness. Remember that these shims were originally intended to be “on-size” and ended up “off-size”. Second, when stacking numerous shims to make a shim pack, it is much easier to think in terms of “on-size”, closer tolerance shims. To illustrate this, let’s do two math problems:</p>
<p>Solve for X: 20+20+20+20+X=100 (on-size shims) OR Solve for X: 22+19+20+19+X=100 (off-size shims)</p>
<p>Working with “on-size” shims eliminates the time spent searching for that “perfect combination”.</p>
<p><strong>How do I know that I am getting the best?</strong></p>
<p>Prove it to yourself. Mic your shims with a micrometer or a caliper to determine the thickness (especially .050 and thicker!). Make sure to check in more than one spot to look for consistency throughout the shim. Compare these findings to what the shim is labeled. While you are checking, also look for burrs and crown (non-flatness). These two conditions can create false readings in the equipment that will lead to wasted shimming time. Put Precision Brand Slotted Shim to the test and I am sure that you will find it to be the best!</p>
<p>Product Description: Precut Slotted Shim</p>
<p>Material: 300 Series Stainless Steel</p>
<p>Size: A (2 Inch x 2 Inch)</p>
<p>Length A: 2 Inch</p>
<p>Thickness 0.001, 0.003, 0.005, 0.010, 0.015, 0.020, 0.025 and 0.075 Inch</p>
<p>Groove G: 5/8 Inch</p>
<p>For Bolt Size: 5/8 UNC or UNF</p>
<p>Quantity Per Package: 80 Pieces (10 pieces for each thickness)</p>
<p>Packaging Weight: 1.67 kg</p>
<p></p>
<p></p>
<p></p>


Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Precut Slotted Shim Shop Kit, 2 Inch X 2 Inch, 300 Series Stainless Steel, 80 Pieces

precut slotted shim shop kit, inch inch, 300 series stainless steel, 80 pieces kit toko berlubang precut, inci inci, baja tahan karat seri 300, buah precision brand kedai berslot keluli siri keping brand/精密品牌 预切开槽垫片车间套件，2 英寸 英寸，300 系列不锈钢，80 精密品牌

precut-slotted-shim-shop-kit-2-inch-x-2-inch-300-series-stainless-steel-80-pieces

3 Inch x 3 Inch, Slot 7/8 Inch, 42955

4 Inch x 4 Inch, Slot 1-1/4 Inch, 42965

5 Inch x 5 Inch, Slot 1-5/8 Inch, 42975

6 Inch x 6 Inch, Slot 2 Inch, 42925 (52 Pieces)

8 Inch x 8 Inch, Slot 2-3/8 Inch, 42935 (52 Pieces)

2 Inch x 2 Inch, Slot 5/8 Inch, 42945

Size

Ptfe Stainless Steel Single Lip Oil Seal 80 X 100 X 10

Reinforced Single PTFE sealing lip, SUS304 stainless steel housing

Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.

Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.

<h3 class="md-block-header-three">Ptfe Stainless Steel Single Lip Oil Seal 80 X 100 X 10</h3><p class="md-block-unstyled">Lip : Single Lip (SL)</p><p class="md-block-unstyled">Inner Diameter (ID) 80mm</p><p class="md-block-unstyled">Outer Diameter (OD) 100mm</p><p class="md-block-unstyled">Thickness (THK) 10mm</p><p class="md-block-unstyled">Design Features:</p><ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul><p class="md-block-unstyled">Operating Limits:</p><p class="md-block-unstyled">Temperature : -90 to +260 degrees</p><p class="md-block-unstyled">Max Pressure : 1.5Mpa</p><p class="md-block-unstyled">Max Speed : 30m/s</p><p class="md-block-unstyled">Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p>

<h3>Ptfe Stainless Steel Single Lip Oil Seal 80 X 100 X 10</h3>
<p>Lip : Single Lip (SL)</p>
<p>Inner Diameter (ID) 80mm</p>
<p>Outer Diameter (OD) 100mm</p>
<p>Thickness (THK) 10mm</p>
<p>Design Features:</p>
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
<p>Operating Limits:</p>
<p>Temperature : -90 to +260 degrees</p>
<p>Max Pressure : 1.5Mpa</p>
<p>Max Speed : 30m/s</p>
<p>Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p>
<p></p>
<p></p>
<p></p>


Nachi

KOYO

Kawasaki

Logitech

SOLATRON

Hydraulic Seals

Linear Bearing

Nuts & Washers

Spherical Bearings 

Sleeve Bearings

Drills, Impact Drivers & Wrenches

John Ng

ptfe stainless steel single lip oil seal 80 100 10 segel minyak bibir tunggal seals oem pengedap oem/oem代工 ptfe不锈钢单唇油封80 油密封用品 oem代工

ptfe-stainless-steel-single-lip-oil-seal-80-x-100-x-10

Ptfe Stainless Steel Single Lip Oil Seal 60 X 80 X 8

<h3 class="md-block-header-three">Ptfe Stainless Steel Single Lip Oil Seal 60 X 80 X 8</h3><p class="md-block-unstyled">Lip : Single Lip (SL)</p><p class="md-block-unstyled">Inner Diameter (ID) 60mm</p><p class="md-block-unstyled">Outer Diameter (OD) 80mm</p><p class="md-block-unstyled">Thickness (THK) 8mm</p><p class="md-block-unstyled">Design Features:</p><ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul><p class="md-block-unstyled">Operating Limits:</p><p class="md-block-unstyled">Temperature : -90 to +260 degrees</p><p class="md-block-unstyled">Max Pressure : 1.5Mpa</p><p class="md-block-unstyled">Max Speed : 30m/s</p><p class="md-block-unstyled">Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p>

<h3>Ptfe Stainless Steel Single Lip Oil Seal 60 X 80 X 8</h3>
<p>Lip : Single Lip (SL)</p>
<p>Inner Diameter (ID) 60mm</p>
<p>Outer Diameter (OD) 80mm</p>
<p>Thickness (THK) 8mm</p>
<p>Design Features:</p>
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
<p>Operating Limits:</p>
<p>Temperature : -90 to +260 degrees</p>
<p>Max Pressure : 1.5Mpa</p>
<p>Max Speed : 30m/s</p>
<p>Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p>
<p></p>
<p></p>
<p></p>


ptfe stainless steel single lip oil seal 60 80 segel minyak bibir tunggal seals oem pengedap oem/oem代工 ptfe不锈钢单唇油封60 油密封用品 oem代工

ptfe-stainless-steel-single-lip-oil-seal-60-x-80-x-8

Ptfe Stainless Steel Double Lip Oil Seal 80 X 110 X 10

Reinforced double PTFE sealing lip, SUS304 stainless steel housing

Hydrodynamic return feed spiral groove for operational reliability

<h3 class="md-block-header-three">Ptfe Stainless Steel Double Lip Oil Seal 80 X 110 X 10</h3><p class="md-block-unstyled">Lip : Double Lip (DL)</p><p class="md-block-unstyled">Inner Diameter (ID) 80mm</p><p class="md-block-unstyled">Outer Diameter (OD) 110mm</p><p class="md-block-unstyled">Thickness (THK) 10mm</p><p class="md-block-unstyled">Design Features:</p><ul class="md-block-unordered-list-item"><li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under more pressure</li><li>Hydrodynamic return feed spiral groove for operational reliability</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul><p class="md-block-unstyled">Operating Limits:</p><p class="md-block-unstyled">Temperature : -90 to +260 degrees</p><p class="md-block-unstyled">Max Pressure : 3.0Mpa</p><p class="md-block-unstyled">Max Speed : 30m/s</p><p class="md-block-unstyled">Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p>

<h3>Ptfe Stainless Steel Double Lip Oil Seal 80 X 110 X 10</h3>
<p>Lip : Double Lip (DL)</p>
<p>Inner Diameter (ID) 80mm</p>
<p>Outer Diameter (OD) 110mm</p>
<p>Thickness (THK) 10mm</p>
<p>Design Features:</p>
<ul>
<li>Reinforced double PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under more pressure</li>
<li>Hydrodynamic return feed spiral groove for operational reliability</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
<p>Operating Limits:</p>
<p>Temperature : -90 to +260 degrees</p>
<p>Max Pressure : 3.0Mpa</p>
<p>Max Speed : 30m/s</p>
<p>Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p>
<p></p>
<p></p>
<p></p>


ptfe stainless steel double lip oil seal 80 110 10 segel minyak bibir ganda seals oem pengedap oem/oem代工 ptfe不锈钢双唇油封80 油密封用品 oem代工

ptfe-stainless-steel-double-lip-oil-seal-80-x-110-x-10

Datasheet

RS Pro Datasheet

Fasteners Selection Guide 56 Pages

Siemens

STANLEY

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Facom

RAPID

PEGLER YORKSHIRE

KARCHER

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 484051 1025 Piece Plain Stainless Steel Metric Cotter Pin Kit A2 304

rs pro 484051 1025 piece plain stainless steel metric cotter pin kit a2 304 potongan metrik polos pins keping biasa keluli tahan karat pro/rs专业版 件普通不锈钢公制开口销套件 rs专业版

rs-pro-484051-1025-piece-plain-stainless-steel-metric-cotter-pin-kit-a2-304

Ptfe Stainless Steel Single Lip Oil Seal 65 X 80 X 8

<h3 class="md-block-header-three">Ptfe Stainless Steel Single Lip Oil Seal 65 X 80 X 8</h3><p class="md-block-unstyled">Lip : Single Lip (SL)</p><p class="md-block-unstyled">Inner Diameter (ID) 65mm</p><p class="md-block-unstyled">Outer Diameter (OD) 80mm</p><p class="md-block-unstyled">Thickness (THK) 8mm</p><p class="md-block-unstyled">Design Features:</p><ul class="md-block-unordered-list-item"><li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li><li>Resist deformation under low pressure</li><li>General purpose rotary shaft seal</li><li>Suitable for unhardened shafts</li><li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li></ul><p class="md-block-unstyled">Operating Limits:</p><p class="md-block-unstyled">Temperature : -90 to +260 degrees</p><p class="md-block-unstyled">Max Pressure : 1.5Mpa</p><p class="md-block-unstyled">Max Speed : 30m/s</p><p class="md-block-unstyled">Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p><p class="md-block-unstyled"><br/></p>

<h3>Ptfe Stainless Steel Single Lip Oil Seal 65 X 80 X 8</h3>
<p>Lip : Single Lip (SL)</p>
<p>Inner Diameter (ID) 65mm</p>
<p>Outer Diameter (OD) 80mm</p>
<p>Thickness (THK) 8mm</p>
<p>Design Features:</p>
<ul>
<li>Reinforced Single PTFE sealing lip, SUS304 stainless steel housing</li>
<li>Resist deformation under low pressure</li>
<li>General purpose rotary shaft seal</li>
<li>Suitable for unhardened shafts</li>
<li>Typical applications : Compressors, Pumps, Mixers Actuators, Blowers, Stirring Systems.</li>
</ul>
<p>Operating Limits:</p>
<p>Temperature : -90 to +260 degrees</p>
<p>Max Pressure : 1.5Mpa</p>
<p>Max Speed : 30m/s</p>
<p>Media : Heat transfer fluids, Air, Water, Powder, Foodstuff, Corrosive fluid.</p>
<p></p>
<p></p>
<p></p>


ptfe stainless steel single lip oil seal 65 80 segel minyak bibir tunggal seals oem pengedap oem/oem代工 ptfe不锈钢单唇油封65 油密封用品 oem代工

ptfe-stainless-steel-single-lip-oil-seal-65-x-80-x-8

Can be used as a stopper to prevent the work plate from falling off or fall off or as a stopper during runaway

Compatible Manufacturers Series IKO: LWH30

Compatible Manufacturers Series NKS: LS30AL/LH30AL

Compatible Manufacturers Series THK: HSR30A

Hexagon Socket Head Cap Screw (SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Can be used as a stopper to prevent the work plate from falling off or fall off or as a stopper during runaway</li><li>Mounting bolts are included</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: LSG for Retaining Stop</li><li>Material: Stainless Steel SUS304</li><li>Size: 30 mm</li><li>Compatible Manufacturers Series IKO: LWH30</li><li>Compatible Manufacturers Series NKS: LS30AL/LH30AL</li><li>Compatible Manufacturers Series THK: HSR30A</li><li>W: 38 mm</li><li>H: 80 mm</li><li>B: 10 mm</li><li>P: 22 mm</li><li>D: 9 mm</li><li>Accessory Bolt: M8×16</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hexagon Socket Head Cap Screw (SUSXM7) - 2 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Can be used as a stopper to prevent the work plate from falling off or fall off or as a stopper during runaway</li>
<li>Mounting bolts are included</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: LSG for Retaining Stop</li>
<li>Material: Stainless Steel SUS304</li>
<li>Size: 30 mm</li>
<li>Compatible Manufacturers Series IKO: LWH30</li>
<li>Compatible Manufacturers Series NKS: LS30AL/LH30AL</li>
<li>Compatible Manufacturers Series THK: HSR30A</li>
<li>W: 38 mm</li>
<li>H: 80 mm</li>
<li>B: 10 mm</li>
<li>P: 22 mm</li>
<li>D: 9 mm</li>
<li>Accessory Bolt: M8×16</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hexagon Socket Head Cap Screw (SUSXM7) - 2 Piece</li>
</ul>


Leland Tan

Iwata Stainless Steel Linear Stopper Type Lsg for Retaining 38mm X 80mm LSG-08S

iwata stainless steel linear stopper type lsg retaining 38mm 80mm lsg-08s tipe untuk penahan mempertahankan iwata/岩田 lsg型不锈钢线性塞子，用于固定38mm 岩田

iwata-stainless-steel-linear-stopper-type-lsg-for-retaining-38mm-x-80mm-lsg-08s

RS PRO Datasheet

DEUTSCH

Junction & Enclosure Box

Rs Pro 2253363 Stainless Steel 545 Piece Hex Socket Drive Screw/Bolt Kit

rs pro 2253363 stainless steel 545 piece hex socket drive screw/bolt kit sekrup/baut screw bolt kits keluli tahan karat keping skru/bolt pemacu soket 不锈钢 件内六角驱动螺钉/螺栓套件 rs专业版

rs-pro-2253363-stainless-steel-545-piece-hex-socket-drive-screw-bolt-kit

Metal with urethane bolt to mitigate the impact sound between

Urethane bolt is capable of precise positioning in the details specifications

Corresponding to NSK Part No: LS35AL/LH35AL

Hexagon Socket Head Bolt (SUSXM7) - 2 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Metal with urethane bolt to mitigate the impact sound between</li><li>Urethane bolt is capable of precise positioning in the details specifications</li><li>Includes mounting bolts</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: LSGN-U Type Linear Stopper</li><li>Material: Stainless Steel SUS304</li><li>Local Size: 35 mm</li><li>Corresponding to IKO Part No: LWH35</li><li>Corresponding to NSK Part No: LS35AL/LH35AL</li><li>Corresponding to THK Part No: HSR35A</li><li>W: 45 mm</li><li>H: 88 mm</li><li>A: 80.5 mm</li><li>B: 10 mm</li><li>P: 25 mm</li><li>T: 6 mm</li><li>M: M8 x P1</li><li>D: 9 mm</li><li>Accessory Bolt: M8 x 16</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hexagon Socket Head Bolt (SUSXM7) - 2 Piece</li><li>① Urethane Bolt (SBUH6.8) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Metal with urethane bolt to mitigate the impact sound between</li>
<li>Urethane bolt is capable of precise positioning in the details specifications</li>
<li>Includes mounting bolts</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: LSGN-U Type Linear Stopper</li>
<li>Material: Stainless Steel SUS304</li>
<li>Local Size: 35 mm</li>
<li>Corresponding to IKO Part No: LWH35</li>
<li>Corresponding to NSK Part No: LS35AL/LH35AL</li>
<li>Corresponding to THK Part No: HSR35A</li>
<li>W: 45 mm</li>
<li>H: 88 mm</li>
<li>A: 80.5 mm</li>
<li>B: 10 mm</li>
<li>P: 25 mm</li>
<li>T: 6 mm</li>
<li>M: M8 x P1</li>
<li>D: 9 mm</li>
<li>Accessory Bolt: M8 x 16</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hexagon Socket Head Bolt (SUSXM7) - 2 Piece</li>
<li>① Urethane Bolt (SBUH6.8) - 1 Piece</li>
</ul>


Iwata Lsgn-u Type Stainless Steel Linear Stopper With Urethane Bolt 35mm X 80.5mm LSGN-09S-U

iwata lsgn-u type stainless steel linear stopper urethane bolt 35mm 80.5mm lsgn-09s-u jenis linier dengan baut iwata/岩田 lsgn-u型带聚氨酯螺栓的不锈钢线性塞35mm 岩田

iwata-lsgn-u-type-stainless-steel-linear-stopper-with-urethane-bolt-35mm-x-80-5mm-lsgn-09s-u

Entered into force of the strong standard slit collar

Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft

Use in a fixed, such as a sprocket or gear

Holes or screw holes Engineering is also possible

Hex Socket Head Cap Screw (SUSXM7) - 1 Piece

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Entered into force of the strong standard slit collar</li><li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li><li>Use in a fixed, such as a sprocket or gear</li><li>Holes or screw holes Engineering is also possible</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Slit Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 60 mm</li><li>Width (L): 22 mm</li><li>Outer Diameter (φD): 95 mm</li><li>W: 3 mm</li><li>X: 37 mm</li><li>Y: 18 mm</li><li>Tightening Screw (M): M10x35</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Entered into force of the strong standard slit collar</li>
<li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li>
<li>Use in a fixed, such as a sprocket or gear</li>
<li>Holes or screw holes Engineering is also possible</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Slit Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 60 mm</li>
<li>Width (L): 22 mm</li>
<li>Outer Diameter (φD): 95 mm</li>
<li>W: 3 mm</li>
<li>X: 37 mm</li>
<li>Y: 18 mm</li>
<li>Tightening Screw (M): M10x35</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li>
</ul>


Iwata Stainless Steel Standard Slit Collar 60mm X 22mm SCS6022S

iwata stainless steel standard slit collar 60mm x 22mm scs6022s standar celah kerah ball bearings bearing bebola iwata/岩田 县不锈钢标准领60mm 球轴承 岩田

iwata-stainless-steel-standard-slit-collar-60mm-x-22mm-scs6022s

Urethane with mitigating the impact sound of metal-to-metal

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Urethane with mitigating the impact sound of metal-to-metal</li><li>Mounting bolts are included </li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: LSWU-2 Type Linear Stopper</li><li>Material: Stainless Steel SUS304</li><li>Local Size: 15 mm</li><li>Corresponding to IKO Part No: LWH15</li><li>Corresponding to NSK Part No: LS15AL</li><li>Corresponding to THK Part No: HSR15A</li><li>W: 32 mm</li><li>H: 22 mm</li><li>A: 14.5 mm</li><li>B: 18 mm</li><li>E: 12 mm</li><li>F: 8 mm</li><li>P: 16 mm</li><li>T: 25 mm</li><li>M: M5</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>① Urethane (SBU15) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Urethane with mitigating the impact sound of metal-to-metal</li>
<li>Mounting bolts are included&nbsp;</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: LSWU-2 Type Linear Stopper</li>
<li>Material: Stainless Steel SUS304</li>
<li>Local Size: 15 mm</li>
<li>Corresponding to IKO Part No: LWH15</li>
<li>Corresponding to NSK Part No: LS15AL</li>
<li>Corresponding to THK Part No: HSR15A</li>
<li>W: 32 mm</li>
<li>H: 22 mm</li>
<li>A: 14.5 mm</li>
<li>B: 18 mm</li>
<li>E: 12 mm</li>
<li>F: 8 mm</li>
<li>P: 16 mm</li>
<li>T: 25 mm</li>
<li>M: M5</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>① Urethane (SBU15) - 1 Piece</li>
</ul>


Iwata Lswu-2 Type Stainless Steel Linear Stopper With Urethane 15mm X 14.5mm LSWU-02S

iwata lswu-2 type stainless steel linear stopper urethane 15mm 14.5mm lswu-02s jenis dengan iwata/岩田 lswu-2型带聚氨酯的不锈钢线性塞15mm 岩田

iwata-lswu-2-type-stainless-steel-linear-stopper-with-urethane-15mm-x-14-5mm-lswu-02s

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Entered into force of the strong standard slit collar</li><li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li><li>Use in a fixed, such as a sprocket or gear</li><li>Holes or screw holes Engineering is also possible</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Slit Collar</li><li>Material: Stainless Steel SUS304</li><li>Inner Diameter (φB): 10 mm</li><li>Width (L): 12 mm</li><li>Outer Diameter (φD): 30 mm</li><li>W: 1.5 mm</li><li>X: 9 mm</li><li>Y: 5 mm</li><li>A: 11 mm</li><li>Tightening Screw (M): M5x16</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>Entered into force of the strong standard slit collar</li>
<li>Fastening force for clamping in-plane is strong, difficult to type is scratch the shaft</li>
<li>Use in a fixed, such as a sprocket or gear</li>
<li>Holes or screw holes Engineering is also possible</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Slit Collar</li>
<li>Material: Stainless Steel SUS304</li>
<li>Inner Diameter (φB): 10 mm</li>
<li>Width (L): 12 mm</li>
<li>Outer Diameter (φD): 30 mm</li>
<li>W: 1.5 mm</li>
<li>X: 9 mm</li>
<li>Y: 5 mm</li>
<li>A: 11 mm</li>
<li>Tightening Screw (M): M5x16</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Hex Socket Head Cap Screw (SUSXM7) - 1 Piece</li>
</ul>


Iwata Stainless Steel Standard Slit Collar 10mm X 12mm SCS1012S

iwata stainless steel standard slit collar 10mm x 12mm scs1012s standar celah kerah ball bearings bearing bebola iwata/岩田 县不锈钢标准切领10mm 球轴承 岩田

iwata-stainless-steel-standard-slit-collar-10mm-x-12mm-scs1012s

With urethane to reduce impact noise between metals 

Urethane part is also sold separately as a replacement part

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>With urethane to reduce impact noise between metals </li><li>Urethane part is also sold separately as a replacement part</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: LSVU Type Linear Stopper</li><li>Material: Stainless Steel SUS304</li><li>Local Size: 35 mm</li><li>Corresponding to IKO Part No: LWH35</li><li>Corresponding to NSK Part No: LS35AL/LH35AL</li><li>Corresponding to THK Part No: HSR35A</li><li>W: 50 mm</li><li>H: 46 mm</li><li>A: 38.5 mm</li><li>P: 35 mm</li><li>T: 16 mm</li><li>M1: M8 x 16</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>① Urethane (SBU15) - 1 Piece</li></ul>

<h3>Features:</h3>
<ul>
<li>With urethane to reduce impact noise between metals&nbsp;</li>
<li>Urethane part is also sold separately as a replacement part</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: LSVU Type Linear Stopper</li>
<li>Material: Stainless Steel SUS304</li>
<li>Local Size: 35 mm</li>
<li>Corresponding to IKO Part No: LWH35</li>
<li>Corresponding to NSK Part No: LS35AL/LH35AL</li>
<li>Corresponding to THK Part No: HSR35A</li>
<li>W: 50 mm</li>
<li>H: 46 mm</li>
<li>A: 38.5 mm</li>
<li>P: 35 mm</li>
<li>T: 16 mm</li>
<li>M1: M8 x 16</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>① Urethane (SBU15) - 1 Piece</li>
</ul>


Iwata Lsvu Type Stainless Steel Linear Stopper With Urethane 35mm X 38.5mm LSVU-09S

iwata lsvu type stainless steel linear stopper urethane 35mm 38.5mm lsvu-09s jenis dengan iwata/岩田 lsvu型带聚氨酯35mm 38.5mm的不锈钢线性塞lsvu-09s 岩田

iwata-lsvu-type-stainless-steel-linear-stopper-with-urethane-35mm-x-38-5mm-lsvu-09s

Tightening is possible wedge collar with less force by the wedge of special shape for with clamp lever, can easily tightened without tools is the best, such as the width guide to repeat, frequently position adjustment

Product Type: Wedge Collar with Clamping Lever

Lever (Zinc Die Casting/Electrostatic Coating)

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Tightening is possible wedge collar with less force by the wedge of special shape for with clamp lever, can easily tightened without tools is the best, such as the width guide to repeat, frequently position adjustment</li><li>Material is stainless steel</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Wedge Collar with Clamping Lever</li><li>Material: Stainless Steel SUS304</li><li>Clamp Lever Colour: Matte Black</li><li>Inner Diameter (φB): 25 mm</li><li>Width (L): 15 mm</li><li>Outer Diameter (φD): 50 mm</li><li>φd: 12.1 mm</li><li>X: 16.5 mm</li><li>F: 55.6 mm</li><li>Tightening Screw (M): M6x32</li></ul><h3 class="md-block-header-three">Accessories:</h3><ul class="md-block-unordered-list-item"><li>Wedge (SUS304) - 1 Piece</li><li>Clamp Lever - 1 Piece</li><li>Screw (SUS303)</li><li>Lever (Zinc Die Casting/Electrostatic Coating)</li></ul>

<h3>Features:</h3>
<ul>
<li>Tightening is possible wedge collar with less force by the wedge of special shape for with clamp lever, can easily tightened without tools is the best, such as the width guide to repeat, frequently position adjustment</li>
<li>Material is stainless steel</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Wedge Collar with Clamping Lever</li>
<li>Material: Stainless Steel SUS304</li>
<li>Clamp Lever Colour: Matte Black</li>
<li>Inner Diameter (φB): 25 mm</li>
<li>Width (L): 15 mm</li>
<li>Outer Diameter (φD): 50 mm</li>
<li>φd: 12.1 mm</li>
<li>X: 16.5 mm</li>
<li>F: 55.6 mm</li>
<li>Tightening Screw (M): M6x32</li>
</ul>
<h3>Accessories:</h3>
<ul>
<li>Wedge (SUS304) - 1 Piece</li>
<li>Clamp Lever - 1 Piece</li>
<li>Screw (SUS303)</li>
<li>Lever (Zinc Die Casting/Electrostatic Coating)</li>
</ul>


Iwata Stainless Steel Wedge Collar With Matte Black Clamping Lever 25mm X 15mm SCK2515SB

iwata stainless steel wedge collar matte black clamping lever 25mm x 15mm sck2515sb dengan ball bearings bearing bebola iwata/岩田 不锈钢楔形领和哑光黑色夹紧杆25mm 球轴承 岩田