Band-It

Dong A Bestech

Hawke

Startech

Construction

construction

Building Materials

building-materials

Electricals

electricals

Cable Gland

cable-gland

Cable Protectors

cable-protectors

Cable Reel

cable-reel

Fasteners

fasteners

Cable Ties

cable-ties

Startech WKSTNCMZP 1m Black Cable Cover in Neoprene

<h3 class="md-block-header-three">Startech WKSTNCMZP 1m Black Cable Cover in Neoprene</h3>Length	1mWidth	98 mmColour	BlackMaterial	Neoprene

<h3>Startech WKSTNCMZP 1m Black Cable Cover in Neoprene</h3>
Length	1m
Width	98 mm
Colour	Black
Material	Neoprene

Datasheet - WKSTNCMZP

RS Pro

SCHNEIDER ELECTRIC

FLUKE

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

startech wkstncmzp 1m black cable cover neoprene penutup kabel hitam dari protectors neoprena startech/星泰科技 1米黑色氯丁橡胶电缆盖 星泰科技

startech-wkstncmzp-1m-black-cable-cover-in-neoprene

 SS316 Cable | Dia 6mm | Length 5m | c/w SS316 Cable Clip 2pcs

SS316 Cable | Dia 6mm | Length 5m | c/w SS316 Cable Clip 2pcs

&nbsp;SS316 Cable | Dia 6mm | Length 5m | c/w SS316 Cable Clip 2pcs

John

Others

Parker

Optibelt

VITON

SAMTECH

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Washers

SS316 Cable | Dia 6mm | Length 5m | c/w SS316 Cable Clip 2pcs

ss316 cable dia 6mm length 5m c/w clip 2pcs kabel diameter panjang dilengkapi dengan klip buah reel oem gulungan rol oem/oem代工 电缆 直径 毫米 长度 附带 电缆夹 电缆卷筒 oem代工

ss316-cable-dia-6mm-length-5m-c-w-ss316-cable-clip-2pcs

The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. 

Minimium Loop Tensile Strength (lbs): 125

Application Tools: K50289, XE9229, C07569, CB1000

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B046-0200Material: SS316Width (in): 0.18Width (mm): 4.6Length (in): 7.9Length (mm): 200Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 2.0Maximum Diameter Single Wrap (mm): 52Minimium Loop Tensile Strength (lbs): 125Package Quantity: 100Weight Per Bag (lbs): 0.47Weight Per Bag (kg): 0.22Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B046-0200
Material: SS316
Width (in): 0.18
Width (mm): 4.6
Length (in): 7.9
Length (mm): 200
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 2.0
Maximum Diameter Single Wrap (mm): 52
Minimium Loop Tensile Strength (lbs): 125
Package Quantity: 100
Weight Per Bag (lbs): 0.47
Weight Per Bag (kg): 0.22
Application Tools: K50289, XE9229, C07569, CB1000

Izon Ng 

Panduit

BRADY

Brother

WEICON

Label Papers

Labelling Machines

Electrical Safety

Putty

Padlocks & Lockout Devices

Warning Tapes

Outdoor Sports & Leisure

Lubricants

Clamps

Tylus

Band-It Kt Series 200mm X 4.6mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 200mm 4.6mm epoxy coated black stainless steel 316 cable ties ikatan kabel pengikat epoksi bersalut keluli tahan karat hitam band-it/土匪 系列 200 毫米 4.6 毫米环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-200mm-x-4-6mm-epoxy-coated-black-stainless-steel-316-cable-ties

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B046-0250Material: SS316Width (in): 0.18Width (mm): 4.6Length (in): 9.8Length (mm): 250Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 2.7Maximum Diameter Single Wrap (mm): 67Minimium Loop Tensile Strength (lbs): 125Package Quantity: 100Weight Per Bag (lbs): 0.50Weight Per Bag (kg): 0.23Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B046-0250
Material: SS316
Width (in): 0.18
Width (mm): 4.6
Length (in): 9.8
Length (mm): 250
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 2.7
Maximum Diameter Single Wrap (mm): 67
Minimium Loop Tensile Strength (lbs): 125
Package Quantity: 100
Weight Per Bag (lbs): 0.50
Weight Per Bag (kg): 0.23
Application Tools: K50289, XE9229, C07569, CB1000

Band-It Kt Series 250mm X 4.6mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 250mm 4.6mm epoxy coated black stainless steel 316 cable ties ikatan kabel pengikat epoksi bersalut keluli tahan karat hitam band-it/土匪 系列 250 毫米 4.6 毫米环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-250mm-x-4-6mm-epoxy-coated-black-stainless-steel-316-cable-ties

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B046-0300Material: SS316Width (in): 0.18Width (mm): 4.6Length (in): 11.8Length (mm): 300Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 3.3Maximum Diameter Single Wrap (mm): 83Minimium Loop Tensile Strength (lbs): 125Package Quantity: 100Weight Per Bag (lbs): 0.86Weight Per Bag (kg): 0.39Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B046-0300
Material: SS316
Width (in): 0.18
Width (mm): 4.6
Length (in): 11.8
Length (mm): 300
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 3.3
Maximum Diameter Single Wrap (mm): 83
Minimium Loop Tensile Strength (lbs): 125
Package Quantity: 100
Weight Per Bag (lbs): 0.86
Weight Per Bag (kg): 0.39
Application Tools: K50289, XE9229, C07569, CB1000

Band-It Kt Series 300mm X 4.6mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 300mm 4.6mm epoxy coated black stainless steel 316 cable ties seri dilapisi hitam ikatan kabel pengikat epoksi bersalut keluli tahan karat band-it/土匪 系列 环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-300mm-x-4-6mm-epoxy-coated-black-stainless-steel-316-cable-ties

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B046-0350Material: SS316Width (in): 0.18Width (mm): 4.6Length (in): 13.8Length (mm): 350Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 3.9Maximum Diameter Single Wrap (mm): 99Minimium Loop Tensile Strength (lbs): 125Package Quantity: 100Weight Per Bag (lbs): 0.86Weight Per Bag (kg): 0.39Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B046-0350
Material: SS316
Width (in): 0.18
Width (mm): 4.6
Length (in): 13.8
Length (mm): 350
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 3.9
Maximum Diameter Single Wrap (mm): 99
Minimium Loop Tensile Strength (lbs): 125
Package Quantity: 100
Weight Per Bag (lbs): 0.86
Weight Per Bag (kg): 0.39
Application Tools: K50289, XE9229, C07569, CB1000

Band-It Kt Series 350mm X 4.6mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 350mm 4.6mm epoxy coated black stainless steel 316 cable ties ikatan kabel pengikat siri epoksi bersalut keluli tahan karat hitam band-it/土匪 系列 350 毫米 4.6 毫米环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-350mm-x-4-6mm-epoxy-coated-black-stainless-steel-316-cable-ties

Minimium Loop Tensile Strength (lbs): 175

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B078-0200Material: SS316Width (in): 0.31Width (mm): 7.8Length (in): 7.9Length (mm): 200Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 2.0Maximum Diameter Single Wrap (mm): 52Minimium Loop Tensile Strength (lbs): 175Package Quantity: 100Weight Per Bag (lbs): 0.81Weight Per Bag (kg): 0.37Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B078-0200
Material: SS316
Width (in): 0.31
Width (mm): 7.8
Length (in): 7.9
Length (mm): 200
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 2.0
Maximum Diameter Single Wrap (mm): 52
Minimium Loop Tensile Strength (lbs): 175
Package Quantity: 100
Weight Per Bag (lbs): 0.81
Weight Per Bag (kg): 0.37
Application Tools: K50289, XE9229, C07569, CB1000

Band-It Kt Series 200mm X 7.8mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 200mm 7.8mm epoxy coated black stainless steel 316 cable ties ikatan kabel pengikat epoksi bersalut keluli tahan karat hitam band-it/土匪 系列 200 毫米 7.8 毫米环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-200mm-x-7-8mm-epoxy-coated-black-stainless-steel-316-cable-ties

Paul Ang

STANLEY

MAKITA

BOSCH

Werner

WIHA

DEWALT

Other Tools

Ladders & Platforms

Door Hardware & Locks

Other Power Tools

Other Measuring Tools

Other Fittings

Drills, Impact Drivers & Wrenches

Power Tools Accessories

Gardening Hand Tools

Desk stationery

PowerFit Industrial Pte Ltd

SS316 Stainless Steel Wire - 2kg/roll

ss316 stainless steel wire 2kg/roll kawat baja tahan karat 2kg gulung building materials bahan bangunan oem wayar keluli 2kg/gulungan binaan oem/oem代工 不锈钢丝 2kg/卷 建筑材料 oem代工

ss316-stainless-steel-wire-2kg-roll

Stainless Steel Wire (2kg roll) - 1mm 

Stainless Steel Wire (2kg roll) - 2mm

Sizw

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B078-0250Material: SS316Width (in): 0.31Width (mm): 7.8Length (in): 9.8Length (mm): 250Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 2.7Maximum Diameter Single Wrap (mm): 67Minimium Loop Tensile Strength (lbs): 175Package Quantity: 100Weight Per Bag (lbs): 1.02Weight Per Bag (kg): 0.46Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B078-0250
Material: SS316
Width (in): 0.31
Width (mm): 7.8
Length (in): 9.8
Length (mm): 250
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 2.7
Maximum Diameter Single Wrap (mm): 67
Minimium Loop Tensile Strength (lbs): 175
Package Quantity: 100
Weight Per Bag (lbs): 1.02
Weight Per Bag (kg): 0.46
Application Tools: K50289, XE9229, C07569, CB1000

Band-It Kt Series 250mm X 7.8mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 250mm 7.8mm epoxy coated black stainless steel 316 cable ties ikatan kabel pengikat epoksi bersalut keluli tahan karat hitam band-it/土匪 系列 250 毫米 7.8 毫米环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-250mm-x-7-8mm-epoxy-coated-black-stainless-steel-316-cable-ties

<h3 class="md-block-header-three">Band-It Ball-Lokt™ Ties - Coated </h3>The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency. Part Number: KT6B046-0500Material: SS316Width (in): 0.18Width (mm): 4.6Length (in): 19.7Length (mm): 500Base Material Thickness (in): 0.010Base Material Thickness (mm): 0.250Maximum Diameter Single Wrap (in): 5.8Maximum Diameter Single Wrap (mm): 147Minimium Loop Tensile Strength (lbs): 125Package Quantity: 100Weight Per Bag (lbs): 1.29Weight Per Bag (kg): 0.59Application Tools: K50289, XE9229, C07569, CB1000

<h3>Band-It Ball-Lokt™ Ties - Coated </h3>
The epoxy coating is UV resistant and provides minimal cracking when exposed to lower temperatures or harsh conditions. Fire resistant up to 1000° Fahrenheit ensures a high level of security so cables will stay put during an emergency.&nbsp;
Part Number: KT6B046-0500
Material: SS316
Width (in): 0.18
Width (mm): 4.6
Length (in): 19.7
Length (mm): 500
Base Material Thickness (in): 0.010
Base Material Thickness (mm): 0.250
Maximum Diameter Single Wrap (in): 5.8
Maximum Diameter Single Wrap (mm): 147
Minimium Loop Tensile Strength (lbs): 125
Package Quantity: 100
Weight Per Bag (lbs): 1.29
Weight Per Bag (kg): 0.59
Application Tools: K50289, XE9229, C07569, CB1000

Band-It Kt Series 500mm X 4.6mm Epoxy Coated Black Stainless Steel 316 Cable Ties

band-it kt series 500mm 4.6mm epoxy coated black stainless steel 316 cable ties ikatan kabel pengikat epoksi bersalut keluli tahan karat hitam band-it/土匪 系列 环氧树脂涂层黑色不锈钢 电缆扎带 土匪

band-it-kt-series-500mm-x-4-6mm-epoxy-coated-black-stainless-steel-316-cable-ties

Hawke 501/453/UNIV/A/M20 Gland Cable 12.5-20.5MM Eexd Brass

Hawke International are a global supplier of cable connection and termination products for use in hazardous areas and hostile environments. They are specialists in work with offshore and onshore activities associated with the oil, gas and petrochemical industries and have been for 50 years. Their products are versatile, quality and reliable whilst maintaining safety, safety, integrity and inspectability in the goods they manufacture.

The Hawke 501/453/UNIV/A is an M20 Flameproof gland. It has an EExe Increased Safety rating and is suitable for use in hazardous areas. It can be used outdoor and indoor with steel wire armour, wire braid, steel tape armour, elastomer and plastic insulated cables.

Standards: IEC/EN 60079-0/60079-1/60079-7/61241-0/61241-1/60529 CSA GOST

<h3 class="md-block-header-three">Hawke 501/453/UNIV/A/M20 Gland Cable 12.5-20.5MM Eexd Brass</h3>Hawke International are a global supplier of cable connection and termination products for use in hazardous areas and hostile environments. They are specialists in work with offshore and onshore activities associated with the oil, gas and petrochemical industries and have been for 50 years. Their products are versatile, quality and reliable whilst maintaining safety, safety, integrity and inspectability in the goods they manufacture.The Hawke 501/453/UNIV/A is an M20 Flameproof gland. It has an EExe Increased Safety rating and is suitable for use in hazardous areas. It can be used outdoor and indoor with steel wire armour, wire braid, steel tape armour, elastomer and plastic insulated cables.Spesification<ul class="md-block-unordered-list-item"><li>Product: Gland</li><li>Type (Cable Baskets): Flameproof</li><li>Ingress Protection: IP68</li><li>Cable Type: Armoured Insulated Braided</li><li>Gland Material: Brass Nickel Plated</li><li>Length Min Max:78 mm</li><li>CE Approved:N</li><li>Standards: IEC/EN 60079-0/60079-1/60079-7/61241-0/61241-1/60529 CSA GOST</li><li>Dimension: 20mm</li><li>Type: Flameproof</li><li>Gland Size: M20 mm</li><li>Length: 78 mm</li><li>Ingress Protection (EF005474): IP68</li><li>Length (EF004265): 78 mm</li><li>Manufacturer: Hawke International</li></ul>

<h3>Hawke 501/453/UNIV/A/M20 Gland Cable 12.5-20.5MM Eexd Brass</h3>
Hawke International are a global supplier of cable connection and termination products for use in hazardous areas and hostile environments. They are specialists in work with offshore and onshore activities associated with the oil, gas and petrochemical industries and have been for 50 years. Their products are versatile, quality and reliable whilst maintaining safety, safety, integrity and inspectability in the goods they manufacture.
The Hawke 501/453/UNIV/A is an M20 Flameproof gland. It has an EExe Increased Safety rating and is suitable for use in hazardous areas. It can be used outdoor and indoor with steel wire armour, wire braid, steel tape armour, elastomer and plastic insulated cables.
Spesification
<ul>
<li>Product: Gland</li>
<li>Type (Cable Baskets): Flameproof</li>
<li>Ingress Protection: IP68</li>
<li>Cable Type: Armoured Insulated Braided</li>
<li>Gland Material: Brass Nickel Plated</li>
<li>Length Min Max:78 mm</li>
<li>CE Approved:N</li>
<li>Standards: IEC/EN 60079-0/60079-1/60079-7/61241-0/61241-1/60529 CSA GOST</li>
<li>Dimension: 20mm</li>
<li>Type: Flameproof</li>
<li>Gland Size: M20 mm</li>
<li>Length: 78 mm</li>
<li>Ingress Protection (EF005474): IP68</li>
<li>Length (EF004265): 78 mm</li>
<li>Manufacturer: Hawke International</li>
</ul>

Jimmy Foo

Philips

Thomas & Betts

Bussmann

Weidmuller

FUJI

MILWAUKEE TOOL

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Circuit Breaker

Pilot Lights

Other Electrical Accessories

Doreen Tan

hawke 501/453/univ/a/m20 gland cable 12.5-20.5mm eexd brass kabel kelenjar kuningan hawke/霍克 密封电缆 黄铜 电缆接头 霍克

hawke-501-453-univ-a-m20-gland-cable-12-5-20-5mm-eexd-brass

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks.  

Country of origin: South Korea

Cable cleat sizing: 
• Suitable cable diameter (mm): Ø 27 – 33
• Dimensions (H x W): 90mm (H) x 92mm (W)

Applications:
• Designed to provide securing of cables when installed at intervals along the length of cable
• For fixing, retaining, supporting & securing cables in trefoil formation

Raw materials:
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion
• Halogen free LSF liner pad provides low smoke and low fume

Codes and Standards:
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows:
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF  liner)
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm      height) 

• Classified by an independent third-party testing laboratory in relation to resistance to   electromechanical forces as follows:

1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA2733

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. Country of origin: South Korea Cable cleat sizing: • Suitable cable diameter (mm): Ø 27 – 33 • Dimensions (H x W): 90mm (H) x 92mm (W) Applications: • Designed to provide securing of cables when installed at intervals along the length of cable • For fixing, retaining, supporting &amp; securing cables in trefoil formation Raw materials: • Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion • Halogen free LSF liner pad provides low smoke and low fume Codes and Standards: • Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) • Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA2733

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. 
 
Country of origin: South Korea 
 
Cable cleat sizing: 
• Suitable cable diameter (mm): Ø 27 – 33 
• Dimensions (H x W): 90mm (H) x 92mm (W) 
 
Applications: 
• Designed to provide securing of cables when installed at intervals along the length of cable 
• For fixing, retaining, supporting &amp; securing cables in trefoil formation 
 
Raw materials: 
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion 
• Halogen free LSF liner pad provides low smoke and low fume 
 
Codes and Standards: 
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: 
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) 
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) 
 
• Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 
 
1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA2733

FOSROC

RJ LONDON PAINT

SEALXPERT

Wire Brushes

Cable Carriers

Clearing Drainage Chokes

Painting Tools

Epoxy

Stationery Tapes

Scrapers

Paint Thinners, Solvents & Cleaners

Keith Pey

Dong-A Bestech Cable Dia. Ø 27 – 33 DSCS-A Type Trefoil SS316 Cable Cleat A2733

dong-a bestech cable dia. 27 33 dscs-a type trefoil ss316 cleat a2733 kabel betech protectors dong besttech 电缆直径ø 型三叶形 电缆夹 东亚贝斯泰克

dong-a-bestech-cable-dia-27-33-dscs-a-type-trefoil-ss316-cable-cleat-a2733

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks.  

Country of origin: South Korea

Cable cleat sizing: 
• Suitable cable diameter (mm):  Ø 42 - 48  
• Dimensions (H x W):  112mm (H) x 116mm (W) 

Applications:
• Designed to provide securing of cables when installed at intervals along the length of cable
• For fixing, retaining, supporting & securing cables in trefoil formation

Raw materials:
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion
• Halogen free LSF liner pad provides low smoke and low fume

Codes and Standards:
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows:
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF  liner)
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm      height) 

• Classified by an independent third-party testing laboratory in relation to resistance to   electromechanical forces as follows:

1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA4248

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. Country of origin: South Korea Cable cleat sizing: • Suitable cable diameter (mm): Ø 42 - 48 • Dimensions (H x W): 112mm (H) x 116mm (W) Applications: • Designed to provide securing of cables when installed at intervals along the length of cable • For fixing, retaining, supporting &amp; securing cables in trefoil formation Raw materials: • Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion • Halogen free LSF liner pad provides low smoke and low fume Codes and Standards: • Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) • Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA4248

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. 
 
Country of origin: South Korea 
 
Cable cleat sizing: 
• Suitable cable diameter (mm): Ø 42 - 48 
• Dimensions (H x W): 112mm (H) x 116mm (W) 
 
Applications: 
• Designed to provide securing of cables when installed at intervals along the length of cable 
• For fixing, retaining, supporting &amp; securing cables in trefoil formation 
 
Raw materials: 
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion 
• Halogen free LSF liner pad provides low smoke and low fume 
 
Codes and Standards: 
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: 
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) 
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) 
 
• Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 
 
1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA4248

Dong-A Bestech Cable Dia. Ø 42 – 48 DSCS-A Type Trefoil SS316 Cable Cleat A4248

dong-a bestech cable dia. 42 48 dscs-a type trefoil ss316 cleat a4248 kabel betech protectors dong besttech 电缆直径ø 型三叶形 电缆夹 东亚贝斯泰克

dong-a-bestech-cable-dia-42-48-dscs-a-type-trefoil-ss316-cable-cleat-a4248

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks.  

Country of origin: South Korea

Cable cleat sizing: 
• Suitable cable diameter (mm):   Ø 49 - 55  
• Dimensions (H x W):   122.5mm (H) x 127.5mm (W)

Applications:
• Designed to provide securing of cables when installed at intervals along the length of cable
• For fixing, retaining, supporting & securing cables in trefoil formation

Raw materials:
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion
• Halogen free LSF liner pad provides low smoke and low fume

Codes and Standards:
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows:
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF  liner)
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm      height) 

• Classified by an independent third-party testing laboratory in relation to resistance to   electromechanical forces as follows:

1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA4955 

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. Country of origin: South Korea Cable cleat sizing: • Suitable cable diameter (mm): Ø 49 - 55 • Dimensions (H x W): 122.5mm (H) x 127.5mm (W) Applications: • Designed to provide securing of cables when installed at intervals along the length of cable • For fixing, retaining, supporting &amp; securing cables in trefoil formation Raw materials: • Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion • Halogen free LSF liner pad provides low smoke and low fume Codes and Standards: • Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) • Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA4955

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. 
 
Country of origin: South Korea 
 
Cable cleat sizing: 
• Suitable cable diameter (mm): Ø 49 - 55 
• Dimensions (H x W): 122.5mm (H) x 127.5mm (W) 
 
Applications: 
• Designed to provide securing of cables when installed at intervals along the length of cable 
• For fixing, retaining, supporting &amp; securing cables in trefoil formation 
 
Raw materials: 
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion 
• Halogen free LSF liner pad provides low smoke and low fume 
 
Codes and Standards: 
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: 
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) 
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) 
 
• Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 
 
1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA4955&nbsp;

Dong-A Bestech Cable Dia. Ø 49 – 55 DSCS-A Type Trefoil SS316 Cable Cleat A4955

dong-a bestech cable dia. 49 55 dscs-a type trefoil ss316 cleat a4955 kabel betech protectors dong besttech 电缆直径ø 型三叶形 电缆夹 东亚贝斯泰克

dong-a-bestech-cable-dia-49-55-dscs-a-type-trefoil-ss316-cable-cleat-a4955

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks.  

Country of origin: South Korea

Cable cleat sizing: 
• Suitable cable diameter (mm):    Ø 38 - 44.5 
• Dimensions (H x W):   106mm (H) x 109.5mm (W) 

Applications:
• Designed to provide securing of cables when installed at intervals along the length of cable
• For fixing, retaining, supporting & securing cables in trefoil formation

Raw materials:
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion
• Halogen free LSF liner pad provides low smoke and low fume

Codes and Standards:
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows:
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF  liner)
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm      height) 

• Classified by an independent third-party testing laboratory in relation to resistance to   electromechanical forces as follows:

1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType  #DSCSA3844

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. Country of origin: South Korea Cable cleat sizing: • Suitable cable diameter (mm): Ø 38 - 44.5 • Dimensions (H x W): 106mm (H) x 109.5mm (W) Applications: • Designed to provide securing of cables when installed at intervals along the length of cable • For fixing, retaining, supporting &amp; securing cables in trefoil formation Raw materials: • Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion • Halogen free LSF liner pad provides low smoke and low fume Codes and Standards: • Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) • Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA3844

Product is custom-make upon PO received and no cancellation is allowed. The shipment lead time is 10 weeks. 
 
Country of origin: South Korea 
 
Cable cleat sizing: 
• Suitable cable diameter (mm): Ø 38 - 44.5 
• Dimensions (H x W): 106mm (H) x 109.5mm (W) 
 
Applications: 
• Designed to provide securing of cables when installed at intervals along the length of cable 
• For fixing, retaining, supporting &amp; securing cables in trefoil formation 
 
Raw materials: 
• Stainless steel 316(L) base material provides excellent resistance to abrasion, weathering, corrosion 
• Halogen free LSF liner pad provides low smoke and low fume 
 
Codes and Standards: 
• Comply with the performance requirements in Article 398.2(d) of NFPA-70-2005, The National Electrical Code Cable Cleats and intermediate restraints (where used) shall be classified, tested and certified according to the European Specification IEC 61914 : 2009, Cable Cleats for Electric Installations, as follows: 
a) Classified according to material as Metallic, or Composite (e.g. metallic Cable Cleat with an LSF liner) 
b) Classified according to resistance to impact as ‘Very Heavy’ (i.e. 20J impact energy @ 400mm height) 
 
• Classified by an independent third-party testing laboratory in relation to resistance to electromechanical forces as follows: 
 
1. Category 1 (i.e. no failure that will affect the intended function of holding the cables in place), or 
2. Category 2 (i.e. cables and Cable Cleats and intermediate restraints shall be intact and re-usable after sustaining two successive short circuits and there shall be no cuts or damage to the outer cable sheath, and the cables shall meet the requirements of the voltage withstand test)
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #DongABestech #CableCleat #TrefoilCableCleat #SS316L #MadeInSouthKorea #DSCSAType #DSCSA3844