Iwata

RS Pro

Mechanical Parts

mechanical-parts

Hydraulic Seals

hydraulic-seals

Tapes

tapes

Masking Tapes 

masking-tapes

O Ring

o-ring

UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.

High sealing performance under low pressure 

<h3 class="md-block-header-three">Hydraulic Seal UN 32 x 46 x 10</h3>UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Hydraulic U Seal for Piston &amp; Rod Shaft</li><li>High sealing performance under low pressure </li><li>Not suitable for sealing singly </li><li>Easy installation</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: OEM</li><li>Product Type: Hydraulic Seal</li><li>Internal Diameter: 32 mm</li><li>Outer Diameter: 46 mm</li><li>Thickness: 10 mm</li><li>Material: Polyurethane</li><li>For Brand: NOK, Valqua, DZ, Sakagami</li></ul>

<h3>Hydraulic Seal UN 32 x 46 x 10</h3>
UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.
<h3>Features:</h3>
<ul>
<li>Hydraulic U Seal for Piston &amp; Rod Shaft</li>
<li>High sealing performance under low pressure&nbsp;</li>
<li>Not suitable for sealing singly&nbsp;</li>
<li>Easy installation</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: OEM</li>
<li>Product Type: Hydraulic Seal</li>
<li>Internal Diameter: 32 mm</li>
<li>Outer Diameter: 46 mm</li>
<li>Thickness: 10 mm</li>
<li>Material: Polyurethane</li>
<li>For Brand: NOK, Valqua, DZ, Sakagami</li>
</ul>

Others

Nachi

KOYO

Kawasaki

Logitech

SOLATRON

Ball Bearings

Screw

Linear Bearing

Oil Seals

Nuts & Washers

Spherical Bearings 

Sleeve Bearings

Drills, Impact Drivers & Wrenches

John Ng

buyerIntroduction

Hydraulic Seal Un 32 X 46 X 10

hydraulic seal un 32 46 10 segel hidraulik seals hidrolik oem pengedap oem/oem代工 液压密封件un 液压油封 oem代工

hydraulic-seal-un-32-x-46-x-10

It is a cheaper crepe paper seal than polyester

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>It is a cheaper crepe paper seal than polyester</li><li>Larger is a split type mount</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata </li><li>Product Type: Masking Seal E Round Tape</li><li>Film: Crepe Paper </li><li>Glue: Silicone Rubber Glue</li><li>Heat Resistant Temperature: 160℃ </li><li>Package Type: Pack</li><li>Quantity per Package: 10</li></ul><h3 class="md-block-header-three">Available Diameter:</h3><ul class="md-block-unordered-list-item"><li>SKU: HSEC10-P - 10 mm</li><li>SKU: HSEC12-P - 12 mm</li><li>SKU: HSEC14-P - 14 mm</li><li>SKU: HSEC15-P - 15 mm</li><li>SKU: HSEC16-P - 16 mm</li><li>SKU: HSEC18-P - 18 mm</li><li>SKU: HSEC19-P - 19 mm</li><li>SKU: HSEC20-P - 20 mm</li><li>SKU: HSEC22-P - 22 mm</li><li>SKU: HSEC23-P - 23 mm</li><li>SKU: HSEC24-P - 24 mm</li><li>SKU: HSEC25-P - 25 mm</li><li>SKU: HSEC28-P - 28 mm</li><li>SKU: HSEC30-P - 30 mm</li><li>SKU: HSEC35-P - 35 mm</li><li>SKU: HSEC40-P - 40 mm</li><li>SKU: HSEC46-P - 46 mm</li><li>SKU: HSEC48-P - 48 mm</li><li>SKU: HSEC50-P - 50 mm</li><li>SKU: HSEC55-P - 55 mm</li><li>SKU: HSEC60-P - 60 mm</li><li>SKU: HSEC70-P - 70 mm</li><li>SKU: HSEC80-P - 80 mm</li><li>SKU: HSEC90-P - 90 mm</li><li>SKU: HSEC100-P - 100 mm</li></ul>

<h3>Features:</h3>
<ul>
<li>It is a cheaper crepe paper seal than polyester</li>
<li>Larger is a split type mount</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata&nbsp;</li>
<li>Product Type: Masking Seal E Round Tape</li>
<li>Film: Crepe Paper&nbsp;</li>
<li>Glue: Silicone Rubber Glue</li>
<li>Heat Resistant Temperature: 160℃&nbsp;</li>
<li>Package Type: Pack</li>
<li>Quantity per Package: 10</li>
</ul>
<h3>Available Diameter:</h3>
<ul>
<li>SKU: HSEC10-P - 10 mm</li>
<li>SKU: HSEC12-P - 12 mm</li>
<li>SKU: HSEC14-P - 14 mm</li>
<li>SKU: HSEC15-P - 15 mm</li>
<li>SKU: HSEC16-P - 16 mm</li>
<li>SKU: HSEC18-P - 18 mm</li>
<li>SKU: HSEC19-P - 19 mm</li>
<li>SKU: HSEC20-P - 20 mm</li>
<li>SKU: HSEC22-P - 22 mm</li>
<li>SKU: HSEC23-P - 23 mm</li>
<li>SKU: HSEC24-P - 24 mm</li>
<li>SKU: HSEC25-P - 25 mm</li>
<li>SKU: HSEC28-P - 28 mm</li>
<li>SKU: HSEC30-P - 30 mm</li>
<li>SKU: HSEC35-P - 35 mm</li>
<li>SKU: HSEC40-P - 40 mm</li>
<li>SKU: HSEC46-P - 46 mm</li>
<li>SKU: HSEC48-P - 48 mm</li>
<li>SKU: HSEC50-P - 50 mm</li>
<li>SKU: HSEC55-P - 55 mm</li>
<li>SKU: HSEC60-P - 60 mm</li>
<li>SKU: HSEC70-P - 70 mm</li>
<li>SKU: HSEC80-P - 80 mm</li>
<li>SKU: HSEC90-P - 90 mm</li>
<li>SKU: HSEC100-P - 100 mm</li>
</ul>

IT Accessories

Hooks & Eyes

Machinery Accessories

Leland Tan

Iwata Masking Seal E Round Type

iwata masking seal round type tapes jenis bulat iwata/岩田 mask子密封圈e圆形 岩田

iwata-masking-seal-e-round-type

HSEC10-P - 10 mm

HSEC12-P - 12 mm

HSEC14-P - 14 mm

HSEC15-P - 15 mm

HSEC16-P - 16 mm

HSEC18-P - 18 mm

HSEC19-P - 19 mm

HSEC20-P - 20 mm

HSEC22-P - 22 mm

HSEC23-P - 23 mm

HSEC24-P - 24 mm

HSEC25-P - 25 mm

HSEC28-P - 28 mm

HSEC30-P - 30 mm

HSEC32-P - 32 mm

HSEC35-P - 35 mm

HSEC40-P - 40 mm

HSEC46-P - 46 mm

HSEC48-P - 48 mm

HSEC50-P - 50 mm

HSEC55-P - 55 mm

HSEC60-P - 60 mm

HSEC70-P - 70 mm

HSEC80-P - 80 mm

HSEC90-P - 90 mm

HSEC100-P - 100 mm

Diameter

RS PRO Datasheet

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Facom

Wago

Kimberly Clark

HEICO

Plugs & Connector 

Panel Mount Indicators 

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Bolts

Electrical Wire 

Fuses & Fusegear

RS Components ETH SG

Rs Pro 1965738 Fkm O-Ring, 42mm Bore, 46mm Outer Diameter (1 Bag of 10)

rs pro 1965738 fkm o-ring, 42mm bore, 46mm outer diameter (1 bag 10) lubang 42mm, luar kantong isi ring o-ring bore beg gelang 形圈，42 毫米内径，46 毫米外径（1 10 个） o型圈 rs专业版

rs-pro-1965738-fkm-o-ring-42mm-bore-46mm-outer-diameter-1-bag-of-10

It can be easily pinched off after painting

The target mark makes positioning easier and can shorten the work time 

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>The central part has a double structure</li><li>It can be easily pinched off after painting</li><li>The target mark makes positioning easier and can shorten the work time </li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata </li><li>Product Type: Masking Seal D Round Tape </li><li>Film: Polyester </li><li>Glue: Silicone Glue </li><li>Heat Resistant Temperature: 220℃</li><li>Package Type: Pack</li><li>Quantity per Package: 10</li></ul><h3 class="md-block-header-three">Available Diameter:</h3><ul class="md-block-unordered-list-item"><li>SKU: HSDP16-P - 16 mm</li><li>SKU: HSDP19-P - 19 mm</li><li>SKU: HSDP20-P - 20 mm</li><li>SKU: HSDP22-P - 22 mm</li><li>SKU: HSDP24-P - 24 mm</li><li>SKU: HSDP26-P - 26 mm</li><li>SKU: HSDP28-P - 28 mm</li><li>SKU: HSDP30-P - 30 mm</li><li>SKU: HSDP32-P - 32 mm</li><li>SKU: HSDP34-P - 34 mm</li><li>SKU: HSDP36-P - 36 mm</li><li>SKU: HSDP38-P - 38 mm</li><li>SKU: HSDP40-P - 40 mm</li><li>SKU: HSDP42-P - 42 mm</li><li>SKU: HSDP45-P - 45 mm</li><li>SKU: HSDP50-P - 50 mm</li><li>SKU: HSDP55-P - 55 mm</li><li>SKU: HSDP60-P - 60 mm</li><li>SKU: HSDP65-P - 65 mm</li><li>SKU: HSDP70-P - 70 mm</li><li>SKU: HSDP75-P - 75 mm</li><li>SKU: HSDP80-P - 80 mm</li><li>SKU: HSDP85-P - 85 mm</li><li>SKU: HSDP90-P - 90 mm</li><li>SKU: HSDP95-P - 95 mm</li><li>SKU: HSDP100-P - 100 mm</li></ul>

<h3>Features:</h3>
<ul>
<li>The central part has a double structure</li>
<li>It can be easily pinched off after painting</li>
<li>The target mark makes positioning easier and can shorten the work time&nbsp;</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata&nbsp;</li>
<li>Product Type: Masking Seal D Round Tape&nbsp;</li>
<li>Film: Polyester&nbsp;</li>
<li>Glue: Silicone Glue&nbsp;</li>
<li>Heat Resistant Temperature: 220℃</li>
<li>Package Type: Pack</li>
<li>Quantity per Package: 10</li>
</ul>
<h3>Available Diameter:</h3>
<ul>
<li>SKU: HSDP16-P - 16 mm</li>
<li>SKU: HSDP19-P - 19 mm</li>
<li>SKU: HSDP20-P - 20 mm</li>
<li>SKU: HSDP22-P - 22 mm</li>
<li>SKU: HSDP24-P - 24 mm</li>
<li>SKU: HSDP26-P - 26 mm</li>
<li>SKU: HSDP28-P - 28 mm</li>
<li>SKU: HSDP30-P - 30 mm</li>
<li>SKU: HSDP32-P - 32 mm</li>
<li>SKU: HSDP34-P - 34 mm</li>
<li>SKU: HSDP36-P - 36 mm</li>
<li>SKU: HSDP38-P - 38 mm</li>
<li>SKU: HSDP40-P - 40 mm</li>
<li>SKU: HSDP42-P - 42 mm</li>
<li>SKU: HSDP45-P - 45 mm</li>
<li>SKU: HSDP50-P - 50 mm</li>
<li>SKU: HSDP55-P - 55 mm</li>
<li>SKU: HSDP60-P - 60 mm</li>
<li>SKU: HSDP65-P - 65 mm</li>
<li>SKU: HSDP70-P - 70 mm</li>
<li>SKU: HSDP75-P - 75 mm</li>
<li>SKU: HSDP80-P - 80 mm</li>
<li>SKU: HSDP85-P - 85 mm</li>
<li>SKU: HSDP90-P - 90 mm</li>
<li>SKU: HSDP95-P - 95 mm</li>
<li>SKU: HSDP100-P - 100 mm</li>
</ul>

Iwata Masking Seal D Round Tape

iwata masking seal round tape tapes pita bulat iwata/岩田 县遮蔽密封d圆形胶带 岩田

iwata-masking-seal-d-round-tape

HSDP16-P - 16 mm

HSDP19-P - 19 mm

HSDP20-P - 20 mm

HSDP22-P - 22 mm

HSDP24-P - 24 mm

HSDP26-P - 26 mm

HSDP28-P - 28 mm

HSDP30-P - 30 mm

HSDP32-P - 32 mm

HSDP34-P - 34 mm

HSDP36-P - 36 mm

HSDP38-P - 38 mm

HSDP40-P - 40 mm

HSDP42-P - 42 mm

HSDP45-P - 45 mm

HSDP50-P - 50 mm 

HSDP55-P - 55 mm

HSDP60-P - 60 mm

HSDP65-P - 65 mm

HSDP70-P - 70 mm

HSDP75-P - 75 mm

HSDP80-P - 80 mm

HSDP85-P - 85 mm

HSDP90-P - 90 mm

HSDP95-P - 95 mm

HSDP100-P - 100 mm

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS309 ID 10.46 x CS 5.33Material : Nitrile (NBR) 70 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS309&nbsp;
ID 10.46 x CS 5.33
Material : Nitrile (NBR) 70 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bngab"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bngab" 
 layout="nodisplay"></amp-image-lightbox>

John

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Shaft Couplings

Plumbing Tools & Equipment

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING AS568 AS309 ID 10.46 x CS 5.33 Nitrile (NBR) 70 Shore

oring as568 as309 id 10.46 cs 5.33 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 5.33腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as309-id-10-46-x-cs-5-33-nitrile-nbr-70-shore

mechanical parts

oil seals

oil-seals