Iwata

RS Pro

Mechanical Parts

mechanical-parts

Hydraulic Seals

hydraulic-seals

O Ring

o-ring

Rubber Seals

rubber-seals

UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.

High sealing performance under low pressure

<h3 class="md-block-header-three">Hydraulic Seal UN 112 x 127 x 12</h3><p class="md-block-unstyled">UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Hydraulic U Seal for Piston &amp; Rod Shaft</li><li>High sealing performance under low pressure</li><li>Not suitable for sealing singly </li><li>Easy installation</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: OEM</li><li>Product Type: Hydraulic Seal</li><li>Internal Diameter: 112 mm</li><li>Outer Diameter: 127 mm</li><li>Thickness: 12 mm</li><li>Material: Polyurethane</li><li>For Brand: NOK, Valqua, DZ, Sakagami</li></ul>

<h3>Hydraulic Seal UN 112 x 127 x 12</h3>
<p>UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.</p>
<h3>Features:</h3>
<ul>
<li>Hydraulic U Seal for Piston &amp; Rod Shaft</li>
<li>High sealing performance under low pressure</li>
<li>Not suitable for sealing singly&nbsp;</li>
<li>Easy installation</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: OEM</li>
<li>Product Type: Hydraulic Seal</li>
<li>Internal Diameter: 112 mm</li>
<li>Outer Diameter: 127 mm</li>
<li>Thickness: 12 mm</li>
<li>Material: Polyurethane</li>
<li>For Brand: NOK, Valqua, DZ, Sakagami</li>
</ul>


Others

Nachi

KOYO

Kawasaki

Logitech

SOLATRON

Ball Bearings

Screw

Linear Bearing

Oil Seals

Nuts & Washers

Spherical Bearings 

Sleeve Bearings

Drills, Impact Drivers & Wrenches

John Ng

buyerIntroduction

Hydraulic Seal Un 112 X 127 X 12

hydraulic seal un 112 127 12 segel hidraulik seals hidrolik oem pengedap oem/oem代工 液压密封件un 液压油封 oem代工

hydraulic-seal-un-112-x-127-x-12

IDU Polyurethane Cylinder Suitable for piston rod sealing in mechanical equipments, can prevent greatly leaking oil. Used widely in auto car, pump, air cylinder or other hydraulic machines.

<h3 class="md-block-header-three">Hydraulic Seal IDU 115 x 127 x 14</h3><p class="md-block-unstyled">IDU Polyurethane Cylinder Suitable for piston rod sealing in mechanical equipments, can prevent greatly leaking oil. Used widely in auto car, pump, air cylinder or other hydraulic machines.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Hydraulic U Seal for Rod Shaft</li><li>General purpose seal</li><li>Excellent temperature resistance</li><li>Ease of installation</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: OEM</li><li>Product Type: Rod Seal</li><li>Internal Diameter: 115 mm</li><li>Outer Diameter: 127 mm</li><li>Thickness: 14 mm</li><li>Material: Polyurethane</li><li>For Brand: NOK, Valqua, DZ, Sakagami</li></ul>

<h3>Hydraulic Seal IDU 115 x 127 x 14</h3>
<p>IDU Polyurethane Cylinder Suitable for piston rod sealing in mechanical equipments, can prevent greatly leaking oil. Used widely in auto car, pump, air cylinder or other hydraulic machines.</p>
<h3>Features:</h3>
<ul>
<li>Hydraulic U Seal for Rod Shaft</li>
<li>General purpose seal</li>
<li>Excellent temperature resistance</li>
<li>Ease of installation</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: OEM</li>
<li>Product Type: Rod Seal</li>
<li>Internal Diameter: 115 mm</li>
<li>Outer Diameter: 127 mm</li>
<li>Thickness: 14 mm</li>
<li>Material: Polyurethane</li>
<li>For Brand: NOK, Valqua, DZ, Sakagami</li>
</ul>


Hydraulic Seal Idu 115 X 127 X 14

hydraulic seal idu 115 127 14 seals segel hidrolik oem pengedap hidraulik oem/oem代工 液压密封件idu 液压油封 oem代工

hydraulic-seal-idu-115-x-127-x-14

<h3 class="md-block-header-three">Hydraulic Seal UN 115 x 127 x 14</h3><p class="md-block-unstyled">UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Hydraulic U Seal for Piston &amp; Rod Shaft</li><li>High sealing performance under low pressure</li><li>Not suitable for sealing singly </li><li>Easy installation</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: OEM</li><li>Product Type: Hydraulic Seal</li><li>Internal Diameter: 115 mm</li><li>Outer Diameter: 127 mm</li><li>Thickness: 14 mm</li><li>Material: Polyurethane</li><li>For Brand: NOK, Valqua, DZ, Sakagami</li></ul>

<h3>Hydraulic Seal UN 115 x 127 x 14</h3>
<p>UN can be used for piston and rod applications because of having the height of both sealing lips equal. Standardized with the materials of high performance PU 93 shore A.</p>
<h3>Features:</h3>
<ul>
<li>Hydraulic U Seal for Piston &amp; Rod Shaft</li>
<li>High sealing performance under low pressure</li>
<li>Not suitable for sealing singly&nbsp;</li>
<li>Easy installation</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: OEM</li>
<li>Product Type: Hydraulic Seal</li>
<li>Internal Diameter: 115 mm</li>
<li>Outer Diameter: 127 mm</li>
<li>Thickness: 14 mm</li>
<li>Material: Polyurethane</li>
<li>For Brand: NOK, Valqua, DZ, Sakagami</li>
</ul>


Hydraulic Seal Un 115 X 127 X 14

hydraulic seal un 115 127 14 segel hidraulik seals hidrolik oem pengedap oem/oem代工 液压密封件un 液压油封 oem代工

hydraulic-seal-un-115-x-127-x-14

Iwata 3375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127C

Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.

The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures

Easy installation by simply pushing in without using adhesive

The core metal bar provides high grip, light weight and excellent corrosion resistance

Corresponding Plate Thickness: 12 to 12.7 mm

<h3 class="md-block-header-three">Iwata 3375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127C</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: C</li><li>Colour: Black</li><li>Series: 3375</li><li>Pattern: 3</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 3375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127C</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Series: 3375</li>
<li>Pattern: 3</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


IT Accessories

Hooks & Eyes

Machinery Accessories

Leland Tan

iwata 3375 series type trim seal 12.7mm plate thickness pattern 75m s3375-b-3x127c potong untuk ketebalan plat pola rubber seals segel karet tebal corak pengedap getah iwata/岩田 3375系列c型饰边密封件，用于12.7mm板厚3型75m 岩田

iwata-3375-series-c-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-75m-s3375-b-3x127c

Iwata 6375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127C

<h3 class="md-block-header-three">Iwata 6375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127C</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: C</li><li>Colour: Black</li><li>Series: 6375</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 6375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127C</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Series: 6375</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


iwata 6375 series type trim seal 12.7mm plate thickness pattern 15m 6375-b-3x127c seri jenis potong segel untuk ketebalan plat pola rubber seals karet tebal corak pengedap getah iwata/岩田 6375系列c型饰边密封件，用于12.7mm板厚3型15m 岩田

iwata-6375-series-c-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-15m-6375-b-3x127c

Iwata 3375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127A

<h3 class="md-block-header-three">Iwata 3375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127A</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: A</li><li>Colour: Black</li><li>Series: 3375</li><li>Pattern: 3</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 3375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127A</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: A</li>
<li>Colour: Black</li>
<li>Series: 3375</li>
<li>Pattern: 3</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


Iwata 3375 Series a Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S3375-B-3X127A

iwata 3375 series type trim seal 12.7mm plate thickness pattern 75m s3375-b-3x127a tipe untuk ketebalan plat pola rubber seals segel karet tebal corak pengedap getah iwata/岩田 3375系列a型饰条密封件，用于12.7mm板厚3型75m 岩田

iwata-3375-series-a-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-75m-s3375-b-3x127a

Iwata 6375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127C

<h3 class="md-block-header-three">Iwata 6375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127C</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: C</li><li>Colour: Black</li><li>Series: 6375</li><li>Pattern: 3</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 6375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127C</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Series: 6375</li>
<li>Pattern: 3</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


iwata 6375 series type trim seal 12.7mm plate thickness pattern 75m s6375-b-3x127c seri jenis potong segel untuk ketebalan plat pola rubber seals karet tebal corak pengedap getah iwata/岩田 6375系列c型饰边密封件，用于12.7mm板厚3型75m 岩田

iwata-6375-series-c-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-75m-s6375-b-3x127c

Iwata 3375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127C

<h3 class="md-block-header-three">Iwata 3375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127C</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: C</li><li>Colour: Black</li><li>Series: 3375</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 3375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127C</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Series: 3375</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


iwata 3375 series type trim seal 12.7mm plate thickness pattern 15m 3375-b-3x127c potong untuk ketebalan plat pola rubber seals segel karet corak pengedap getah iwata/岩田 3375系列c型饰边密封件，用于12.7mm板厚3型15m 岩田

iwata-3375-series-c-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-15m-3375-b-3x127c

Iwata 6375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127A

<h3 class="md-block-header-three">Iwata 6375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127A</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: A</li><li>Colour: Black</li><li>Series: 6375</li><li>Pattern: 3</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 6375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127A</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: A</li>
<li>Colour: Black</li>
<li>Series: 6375</li>
<li>Pattern: 3</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


Iwata 6375 Series a Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S6375-B-3X127A

iwata 6375 series type trim seal 12.7mm plate thickness pattern 75m s6375-b-3x127a tipe untuk ketebalan plat pola rubber seals segel karet tebal corak pengedap getah iwata/岩田 6375系列a型饰条密封件，用于12.7mm板厚3型75m 岩田

iwata-6375-series-a-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-75m-s6375-b-3x127a

Iwata 6375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127A

<h3 class="md-block-header-three">Iwata 6375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127A</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: A</li><li>Colour: Black</li><li>Series: 6375</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 6375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127A</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: A</li>
<li>Colour: Black</li>
<li>Series: 6375</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


Iwata 6375 Series a Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 6375-B-3X127A

iwata 6375 series type trim seal 12.7mm plate thickness pattern 15m 6375-b-3x127a tipe untuk ketebalan plat 12,7mm pola rubber seals segel karet corak pengedap getah iwata/岩田 6375系列a型饰条密封件，用于12.7mm板厚3型15m 岩田

iwata-6375-series-a-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-15m-6375-b-3x127a

Iwata 4375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127A

<h3 class="md-block-header-three">Iwata 4375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127A</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: A</li><li>Colour: Black</li><li>Series: 4375</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 4375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127A</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: A</li>
<li>Colour: Black</li>
<li>Series: 4375</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


Iwata 4375 Series a Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127A

iwata 4375 series type trim seal 12.7mm plate thickness pattern 15m 4375-b-3x127a tipe untuk ketebalan plat pola rubber seals segel karet corak pengedap getah iwata/岩田 4375系列a型饰条密封件，用于12.7mm板厚3型15m 岩田

iwata-4375-series-a-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-15m-4375-b-3x127a

Iwata 4375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127C

<h3 class="md-block-header-three">Iwata 4375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127C</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: C</li><li>Colour: Black</li><li>Series: 4375</li><li>Pattern: 3</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 4375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127C</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Series: 4375</li>
<li>Pattern: 3</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


iwata 4375 series type trim seal 12.7mm plate thickness pattern 75m s4375-b-3x127c seri jenis potong untuk ketebalan plat pola rubber seals segel karet tebal corak pengedap getah iwata/岩田 4375系列c型饰边密封件，用于12.7mm板厚3型75m 岩田

iwata-4375-series-c-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-75m-s4375-b-3x127c

Iwata 4375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127C

<h3 class="md-block-header-three">Iwata 4375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127C</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: C</li><li>Colour: Black</li><li>Series: 4375</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 4375 Series C Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 4375-B-3X127C</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Series: 4375</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


iwata 4375 series type trim seal 12.7mm plate thickness pattern 15m 4375-b-3x127c seri jenis potong segel untuk ketebalan plat pola rubber seals karet corak pengedap getah iwata/岩田 4375系列c型饰边密封件，用于12.7mm板厚3型15m 岩田

iwata-4375-series-c-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-15m-4375-b-3x127c

Iwata 4375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127A

<h3 class="md-block-header-three">Iwata 4375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127A</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: A</li><li>Colour: Black</li><li>Series: 4375</li><li>Pattern: 3</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 4375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127A</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: A</li>
<li>Colour: Black</li>
<li>Series: 4375</li>
<li>Pattern: 3</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


Iwata 4375 Series a Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 75m S4375-B-3X127A

iwata 4375 series type trim seal 12.7mm plate thickness pattern 75m s4375-b-3x127a tipe potong untuk ketebalan plat 12,7mm pola rubber seals segel karet corak pengedap getah iwata/岩田 4375系列a型饰板密封条，用于12.7mm板厚3型75m 岩田

iwata-4375-series-a-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-75m-s4375-b-3x127a

Iwata 3375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127A

<h3 class="md-block-header-three">Iwata 3375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127A</h3><p class="md-block-unstyled">Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness 12.7 mm</li><li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li><li>Easy installation by simply pushing in without using adhesive</li><li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Trim Seal</li><li>Basic Plate Thickness: 12.7 mm</li><li>Corresponding Plate Thickness: 12 to 12.7 mm</li><li>Type: A</li><li>Colour: Black</li><li>Series: 3375</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Tube: EPDM Sponge Rubber</li><li>Material: PVC</li></ul>

<h3>Iwata 3375 Series A Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127A</h3>
<p>Trim Seals For Plate Thickness 12.7 mm. PVC with Aluminium A3004 core and Comes with EPDM sponge rubber.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness 12.7 mm</li>
<li>The tube part is a foamed sponge with cushioning properties, which is ideal for doors and dust-proof measures</li>
<li>Easy installation by simply pushing in without using adhesive</li>
<li>The core metal bar provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Trim Seal</li>
<li>Basic Plate Thickness: 12.7 mm</li>
<li>Corresponding Plate Thickness: 12 to 12.7 mm</li>
<li>Type: A</li>
<li>Colour: Black</li>
<li>Series: 3375</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Tube: EPDM Sponge Rubber</li>
<li>Material: PVC</li>
</ul>


Iwata 3375 Series a Type Trim Seal for 12.7mm Plate Thickness 3 Pattern 15m 3375-B-3X127A

iwata 3375 series type trim seal 12.7mm plate thickness pattern 15m 3375-b-3x127a untuk ketebalan plat pola rubber seals segel karet corak pengedap getah iwata/岩田 3375系列a型饰条密封件，用于12.7mm板厚3型15m 岩田

iwata-3375-series-a-type-trim-seal-for-12-7mm-plate-thickness-3-pattern-15m-3375-b-3x127a

RS PRO Datasheet

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

Omron

CEJN

Vent-Axia

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 749682 Nitrile Rubber Seal, 40mm Id, 58mm Od, 9mm

rs pro 749682 nitrile rubber seal, 40mm id, 58mm od, 9mm segel karet nitril, id 40mm, od 58mm, seals pengedap getah 丁腈橡胶密封件，内径 40 毫米，外径 58 毫米，9 毫米 rs专业版

rs-pro-749682-nitrile-rubber-seal-40mm-id-58mm-od-9mm

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

<p class="md-block-unstyled">ORING AS568 AS127</p><p class="md-block-unstyled"> ID 34.59 X CS 2.62</p><p class="md-block-unstyled">Material : Silicone  70 Shore    </p><p class="md-block-unstyled">  </p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Additional Information</u></strong></p><p class="md-block-unstyled">Silicone O-Rings are sometimes referred to VMQ O-Rings.</p><p class="md-block-unstyled">Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. </p><p class="md-block-unstyled">In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Temperature Range (Dry Heat)</u></strong></p><p class="md-block-unstyled">Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;C</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Overview on Application Rating for Material Silicone </u></strong></p><p class="md-block-unstyled">Properties (Rating)</p><p class="md-block-unstyled">Oils &amp; Grease - Fair</p><p class="md-block-unstyled">Tear Strength – Poor</p><p class="md-block-unstyled">Fuel Resistance - Poor</p><p class="md-block-unstyled">Heat Ozone &amp; Aging Resistance - Excellent</p><p class="md-block-unstyled">Water Swell Resistance - Excellent</p><p class="md-block-unstyled">Abrasion Resistance - Poor</p><p class="md-block-unstyled">Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Primary Usage</u></strong></p><p class="md-block-unstyled">O-Rings and rubber seals are generally used for:</p><p class="md-block-unstyled">· Applications that require resistance to OIL</p><p class="md-block-unstyled">· Applications that are required to work in low temperatures (-0°C)</p><p class="md-block-unstyled">· High performance Fuel systems that requires strictly no leakage</p><ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul><p class="md-block-unstyled">· General Industrial Use </p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Tips for installation of an O-ring</u></strong></p><p class="md-block-unstyled">O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">So how do you install an O-ring?</u></strong></p><p class="md-block-unstyled">The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p><p class="md-block-unstyled">If you want to install an O-ring correctly and within a short time, here are steps to follow:</p><p class="md-block-unstyled">· Covering and lubricating the threading of the shaft</p><p class="md-block-unstyled">The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p><p class="md-block-unstyled">· Don’t force it over sharp corners</p><p class="md-block-unstyled">That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p><p class="md-block-unstyled">· Even stretching</p><p class="md-block-unstyled">You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p><p class="md-block-unstyled">· Don’t roll it down the shaft</p><p class="md-block-unstyled">Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p><p class="md-block-unstyled">· Finishing it off</p><p class="md-block-unstyled">Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p><p class="md-block-unstyled"><em class="md-inline-italic">For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Installation Guide</u></strong></p><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/~xmTY~cJ7FzIn2FnkrUEfu.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

<p>ORING AS568 AS127</p>
<p>&nbsp;ID 34.59 X CS 2.62</p>
<p>Material : Silicone  70 Shore&nbsp;&nbsp;&nbsp;&nbsp;</p>
<p>&nbsp;&nbsp;</p>
<p><strong><ins>Additional Information</ins></strong></p>
<p>Silicone O-Rings are sometimes referred to VMQ O-Rings.</p>
<p>Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;</p>
<p>In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.</p>
<p><strong><ins>Temperature Range (Dry Heat)</ins></strong></p>
<p>Low: -75`F / -59`C High: 450`F / 232`C</p>
<p><strong><ins>Overview on Application Rating for Material Silicone </ins></strong></p>
<p>Properties (Rating)</p>
<p>Oils &amp; Grease - Fair</p>
<p>Tear Strength – Poor</p>
<p>Fuel Resistance - Poor</p>
<p>Heat Ozone &amp; Aging Resistance - Excellent</p>
<p>Water Swell Resistance - Excellent</p>
<p>Abrasion Resistance - Poor</p>
<p>Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.</p>
<p><strong><ins>Primary Usage</ins></strong></p>
<p>O-Rings and rubber seals are generally used for:</p>
<p>· Applications that require resistance to OIL</p>
<p>· Applications that are required to work in low temperatures (-0°C)</p>
<p>· High performance Fuel systems that requires strictly no leakage</p>
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
<p>· General Industrial Use&nbsp;</p>
<p><strong><ins>Tips for installation of an O-ring</ins></strong></p>
<p>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p>
<p><strong><ins>So how do you install an O-ring?</ins></strong></p>
<p>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p>
<p>If you want to install an O-ring correctly and within a short time, here are steps to follow:</p>
<p>· Covering and lubricating the threading of the shaft</p>
<p>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p>
<p>· Don’t force it over sharp corners</p>
<p>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p>
<p>· Even stretching</p>
<p>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p>
<p>· Don’t roll it down the shaft</p>
<p>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p>
<p>· Finishing it off</p>
<p>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p>
<p><em>For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p>
<p><strong><ins>Installation Guide</ins></strong></p>

        <div class="img-ctnr">
          <amp-img  
            on="tap:eov37"
            tabindex="0"
            role="button"
            class="contain"
            layout="fill"
            src="https://storage.googleapis.com/eezee-product-images/~xmTY~cJ7FzIn2FnkrUEfu.png"
          ></amp-img>
        </div>
    
        <amp-image-lightbox 
          id="eov37" 
          layout="nodisplay"></amp-image-lightbox>

        


John

Optibelt

Gates

SAMTECH

VITON

V Rings

Shaft Couplings

Plumbing Tools & Equipment

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING AS568 AS127 ID 36.17 X CS 2.62 Silicone 70 Shore

oring as568 as127 id 36.17 cs 2.62 silicone 70 shore silikon ring o-ring oem gelang oem/oem代工 2.62硅胶70肖氏 o型圈 oem代工

oring-as568-as127-id-36-17-x-cs-2-62-silicone-70-shore

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).  

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR)  

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.  

Applications that require resistance to OIL 

Applications that are required to work in low temperatures (-0°C) 

High performance Fuel systems that requires strictly no leakage

Covering 	and lubricating the threading of the shaft 

<p class="md-block-unstyled">ORING AS568 AS127</p><p class="md-block-unstyled"> ID 36.17 X CS 2.62</p><p class="md-block-unstyled">Material : Nitrile (NBR) 70 Shore</p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Additional Information</strong></u></p><p class="md-block-unstyled">Nitrile is often referred to Buna (Buna-N) and NBR.</p><p class="md-block-unstyled">Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C).  </p><p class="md-block-unstyled">It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.</p><p class="md-block-unstyled">However Nitrile are not a restricting factors in many applications.</p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Temperature Range</strong></u></p><p class="md-block-unstyled">Low : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;C</p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Overview on Application Rating for Material Nitrile (NBR) </strong></u> </p><p class="md-block-unstyled">Properties ( Rating )</p><p class="md-block-unstyled">Oils &amp; Grease - Good</p><p class="md-block-unstyled">Tear Strength - Good</p><p class="md-block-unstyled">Fuel Resistance - Poor</p><p class="md-block-unstyled">Gas impermeability - Good</p><p class="md-block-unstyled">Compression - Excellent</p><p class="md-block-unstyled">Abrasion Resistance - Good  </p><p class="md-block-unstyled">Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.  </p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Primary Usage</strong></u></p><p class="md-block-unstyled">O-Rings and rubber seals are generally used for:</p><ul class="md-block-unordered-list-item"><li>Applications that require resistance to OIL </li><li>Applications that are required to work in low temperatures (-0°C) </li><li>High performance Fuel systems that requires strictly no leakage</li><ul class="md-block-unordered-list-item"><li>Aircrafts </li><li>Marine Ships </li><li>F1 Cars</li></ul><li>General Industrial Use  </li></ul><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Tips for installation of an O-ring</strong></u></p><p class="md-block-unstyled">O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">So how do you install an O-ring?</strong></u></p><p class="md-block-unstyled">The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p><p class="md-block-unstyled">If you want to install an O-ring correctly and within a short time, here are steps to follow:</p><ul class="md-block-unordered-list-item"><li>Covering 	and lubricating the threading of the shaft </li></ul><p class="md-block-unstyled">The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p><ul class="md-block-unordered-list-item"><li>Don’t force it over sharp corners </li></ul><p class="md-block-unstyled">That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p><ul class="md-block-unordered-list-item"><li>Even stretching </li></ul><p class="md-block-unstyled">You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p><ul class="md-block-unordered-list-item"><li>Don’t roll it down the shaft </li></ul><p class="md-block-unstyled">Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p><ul class="md-block-unordered-list-item"><li>Finishing 	it off </li></ul><p class="md-block-unstyled">Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p><p class="md-block-unstyled"><em class="md-inline-italic">For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p><p class="md-block-unstyled"><u class="md-inline-underline"><strong class="md-inline-bold">Installation Guide</strong></u></p><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/XNwrcjFniWbfO_xUV_Ft0_.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

<p>ORING AS568 AS127</p>
<p>&nbsp;ID 36.17 X CS 2.62</p>
<p>Material : Nitrile (NBR) 70 Shore</p>
<p><strong><ins>Additional Information</ins></strong></p>
<p>Nitrile is often referred to Buna (Buna-N) and NBR.</p>
<p>Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;&nbsp;</p>
<p>It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.</p>
<p>However Nitrile are not a restricting factors in many applications.</p>
<p><strong><ins>Temperature Range</ins></strong></p>
<p>Low : -22`F / -30`C High: 212`F / 100`C</p>
<p><strong><ins>Overview on Application Rating for Material Nitrile (NBR) </ins></strong>&nbsp;</p>
<p>Properties ( Rating )</p>
<p>Oils &amp; Grease - Good</p>
<p>Tear Strength - Good</p>
<p>Fuel Resistance - Poor</p>
<p>Gas impermeability - Good</p>
<p>Compression - Excellent</p>
<p>Abrasion Resistance - Good&nbsp;&nbsp;</p>
<p>Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance.&nbsp;&nbsp;</p>
<p><strong><ins>Primary Usage</ins></strong></p>
<p>O-Rings and rubber seals are generally used for:</p>
<ul>
<li>Applications that require resistance to OIL&nbsp;</li>
<li>Applications that are required to work in low temperatures (-0°C)&nbsp;</li>
<li>High performance Fuel systems that requires strictly no leakage</li>
<ul>
<li>Aircrafts&nbsp;</li>
<li>Marine Ships&nbsp;</li>
<li>F1 Cars</li>
</ul>
<li>General Industrial Use&nbsp;&nbsp;</li>
</ul>
<p><strong><ins>Tips for installation of an O-ring</ins></strong></p>
<p>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p>
<p><strong><ins>So how do you install an O-ring?</ins></strong></p>
<p>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p>
<p>If you want to install an O-ring correctly and within a short time, here are steps to follow:</p>
<ul>
<li>Covering 	and lubricating the threading of the shaft&nbsp;</li>
</ul>
<p>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p>
<ul>
<li>Don’t force it over sharp corners&nbsp;</li>
</ul>
<p>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p>
<ul>
<li>Even stretching&nbsp;</li>
</ul>
<p>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p>
<ul>
<li>Don’t roll it down the shaft&nbsp;</li>
</ul>
<p>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p>
<ul>
<li>Finishing 	it off&nbsp;</li>
</ul>
<p>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p>
<p><em>For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p>
<p><strong><ins>Installation Guide</ins></strong></p>

        <div class="img-ctnr">
          <amp-img  
            on="tap:5ntl"
            tabindex="0"
            role="button"
            class="contain"
            layout="fill"
            src="https://storage.googleapis.com/eezee-product-images/XNwrcjFniWbfO_xUV_Ft0_.png"
          ></amp-img>
        </div>
    
        <amp-image-lightbox 
          id="5ntl" 
          layout="nodisplay"></amp-image-lightbox>

        


ORING AS568 AS127 ID 36.17 X CS 2.62 Nitrile (NBR) 70 Shore

oring as568 as127 id 36.17 cs 2.62 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 2.62腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as127-id-36-17-x-cs-2-62-nitrile-nbr-70-shore

Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore      

Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.

EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.

In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. 

The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.

Overview on Application Rating for Material EPDM

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.

<p class="md-block-unstyled">ORING AS568 AS127</p><p class="md-block-unstyled"> ID 36.17 X CS 2.62</p><p class="md-block-unstyled">Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore      </p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Additional Information</u></strong></p><p class="md-block-unstyled">Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.</p><p class="md-block-unstyled">EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51&#x60;C to 149&#x60;C) and it has good retention of compression.</p><p class="md-block-unstyled">In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance. </p><p class="md-block-unstyled">The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Temperature Range (Dry Heat)</u></strong></p><p class="md-block-unstyled">Low: -60&#x60;F / -51&#x60;C High: 300&#x60;F / 149&#x60;C</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Overview on Application Rating for Material EPDM</u></strong></p><p class="md-block-unstyled">Properties (Rating)</p><p class="md-block-unstyled">Petroleum Oils / Fuels - Poor</p><p class="md-block-unstyled">Steam Up to 399&#x60;F– Excellent</p><p class="md-block-unstyled">Gas Impermeability - Good</p><p class="md-block-unstyled">Compressiom - Good</p><p class="md-block-unstyled">Abrasion Resistance - Good</p><p class="md-block-unstyled">Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Primary Usage</u></strong></p><p class="md-block-unstyled">O-Rings and rubber seals are generally used for:</p><p class="md-block-unstyled">· Applications that require resistance to OIL</p><p class="md-block-unstyled">· Applications that are required to work in low temperatures (-0°C)</p><p class="md-block-unstyled">· High performance Fuel systems that requires strictly no leakage</p><ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul><p class="md-block-unstyled">· General Industrial Use </p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Tips for installation of an O-ring</u></strong></p><p class="md-block-unstyled">O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">So how do you install an O-ring?</u></strong></p><p class="md-block-unstyled">The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p><p class="md-block-unstyled">If you want to install an O-ring correctly and within a short time, here are steps to follow:</p><p class="md-block-unstyled">· Covering and lubricating the threading of the shaft</p><p class="md-block-unstyled">The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p><p class="md-block-unstyled">· Don’t force it over sharp corners</p><p class="md-block-unstyled">That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p><p class="md-block-unstyled">· Even stretching</p><p class="md-block-unstyled">You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p><p class="md-block-unstyled">· Don’t roll it down the shaft</p><p class="md-block-unstyled">Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p><p class="md-block-unstyled">· Finishing it off</p><p class="md-block-unstyled">Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p><p class="md-block-unstyled"><em class="md-inline-italic">For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p><p class="md-block-unstyled"><strong class="md-inline-bold"><u class="md-inline-underline">Installation Guide</u></strong></p><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/gI4MaFcGGJeKhuMY8HEQzn.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

<p>ORING AS568 AS127</p>
<p>&nbsp;ID 36.17 X CS 2.62</p>
<p>Material : Ethylene Propylene Diene Monomer (EPDM) 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p>
<p><strong><ins>Additional Information</ins></strong></p>
<p>Ethylene-propylene diene monomer O-Rings are sometimes referred to EPDM rubber as it is normally compounded with a third monomer to produce it.</p>
<p>EPDM elastomers are an excellent material for sealing brake systems and in hot water and steam applications. Due to its outstanding resistance to extreme range of temperature ranging from (-51`C to 149`C) and it has good retention of compression.</p>
<p>In addition EPDM elastomer perform good resistance to mild acids, detergents, alkalis, silicone oils and greases, ketones, and alcohols. EPDM is widely accepted by user in the seal industry by its excellent chemical resistance properties and its superb ozone resistance.&nbsp;</p>
<p>The down side for applications with petroleum oils, mineral oil, die-ester lubricants or fuel exposure EPDM is not recommended.</p>
<p><strong><ins>Temperature Range (Dry Heat)</ins></strong></p>
<p>Low: -60`F / -51`C High: 300`F / 149`C</p>
<p><strong><ins>Overview on Application Rating for Material EPDM</ins></strong></p>
<p>Properties (Rating)</p>
<p>Petroleum Oils / Fuels - Poor</p>
<p>Steam Up to 399`F– Excellent</p>
<p>Gas Impermeability - Good</p>
<p>Compressiom - Good</p>
<p>Abrasion Resistance - Good</p>
<p>Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance. EPDM O-Rings the standard nominal durometer is 70 Shore.</p>
<p><strong><ins>Primary Usage</ins></strong></p>
<p>O-Rings and rubber seals are generally used for:</p>
<p>· Applications that require resistance to OIL</p>
<p>· Applications that are required to work in low temperatures (-0°C)</p>
<p>· High performance Fuel systems that requires strictly no leakage</p>
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
<p>· General Industrial Use&nbsp;</p>
<p><strong><ins>Tips for installation of an O-ring</ins></strong></p>
<p>O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.</p>
<p><strong><ins>So how do you install an O-ring?</ins></strong></p>
<p>The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.</p>
<p>If you want to install an O-ring correctly and within a short time, here are steps to follow:</p>
<p>· Covering and lubricating the threading of the shaft</p>
<p>The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.</p>
<p>· Don’t force it over sharp corners</p>
<p>That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.</p>
<p>· Even stretching</p>
<p>You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.</p>
<p>· Don’t roll it down the shaft</p>
<p>Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.</p>
<p>· Finishing it off</p>
<p>Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.</p>
<p><em>For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.</em></p>
<p><strong><ins>Installation Guide</ins></strong></p>

        <div class="img-ctnr">
          <amp-img  
            on="tap:2k415"
            tabindex="0"
            role="button"
            class="contain"
            layout="fill"
            src="https://storage.googleapis.com/eezee-product-images/gI4MaFcGGJeKhuMY8HEQzn.png"
          ></amp-img>
        </div>
    
        <amp-image-lightbox 
          id="2k415" 
          layout="nodisplay"></amp-image-lightbox>

        
