Araldite

Bondite

DEVCON

LOCTITE

SEALXPERT

SELLEYS

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Epoxy

epoxy

Painting Materials

painting-materials

Paint Thinners, Solvents & Cleaners

paint-thinners-solvents-cleaners

Construction

construction

Putty

putty

Ppg 1090 Sigmashield High Build Phenolic Epoxy (Grey) Pack Size 15,71 Litres

PPG SigmaShield 1090 is a two component, flint reinforced, solvent free, polyamine cured, epoxy compound, suitable for the protection of both steel and concrete. This product provides protection against water, mild chemicals, impact, and corrosion.

PPG SigmaShield 1090 is a product ideal for use in the marine environment that can be exposed to water just 30 minutes after application. 1090 provides a water permeable layer that allows trapped moisture to be released all the while allowing the surface to breathe, making it highly suited for use on decks regularly exposed to water.

PPG SigmaShield 1090 is a heavy substance that can be applied using a flat trowel or using spray application, however the product must be transported from the container with mixed material to the spray gun. After 6-8 hours the surface is dry to touch and can be recoated after a minimum of 6 hours.

Sigma SigmaShield 1090 is suitable for use on dock-side appliances and surfaces and is highly resistance to abrasion and impact. The marine environment is constantly exposed to varying conditions and 1090 offers the utmost protection and adhesion in dry or wet conditions, warm or cold. SigmaShield 1090 should primarily be used on steel and concrete substrates situated in the marine environment.

<h3 class="md-block-header-three">Ppg 1090 Sigmashield High Build Phenolic Epoxy (Grey) Pack Size 15,71 Litres</h3>PPG SigmaShield 1090 is a two component, flint reinforced, solvent free, polyamine cured, epoxy compound, suitable for the protection of both steel and concrete. This product provides protection against water, mild chemicals, impact, and corrosion.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>PPG SigmaShield 1090 is a product ideal for use in the marine environment that can be exposed to water just 30 minutes after application. 1090 provides a water permeable layer that allows trapped moisture to be released all the while allowing the surface to breathe, making it highly suited for use on decks regularly exposed to water.<ul class="md-block-unordered-list-item"><li>Application</li></ul>PPG SigmaShield 1090 is a heavy substance that can be applied using a flat trowel or using spray application, however the product must be transported from the container with mixed material to the spray gun. After 6-8 hours the surface is dry to touch and can be recoated after a minimum of 6 hours.<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>Sigma SigmaShield 1090 is suitable for use on dock-side appliances and surfaces and is highly resistance to abrasion and impact. The marine environment is constantly exposed to varying conditions and 1090 offers the utmost protection and adhesion in dry or wet conditions, warm or cold. SigmaShield 1090 should primarily be used on steel and concrete substrates situated in the marine environment.

<h3>Ppg 1090 Sigmashield High Build Phenolic Epoxy (Grey) Pack Size 15,71 Litres</h3>
PPG SigmaShield 1090 is a two component, flint reinforced, solvent free, polyamine cured, epoxy compound, suitable for the protection of both steel and concrete. This product provides protection against water, mild chemicals, impact, and corrosion.
<ul>
<li>Best Uses</li>
</ul>
PPG SigmaShield 1090 is a product ideal for use in the marine environment that can be exposed to water just 30 minutes after application. 1090 provides a water permeable layer that allows trapped moisture to be released all the while allowing the surface to breathe, making it highly suited for use on decks regularly exposed to water.
<ul>
<li>Application</li>
</ul>
PPG SigmaShield 1090 is a heavy substance that can be applied using a flat trowel or using spray application, however the product must be transported from the container with mixed material to the spray gun. After 6-8 hours the surface is dry to touch and can be recoated after a minimum of 6 hours.
<ul>
<li>Surface and Environment</li>
</ul>
Sigma SigmaShield 1090 is suitable for use on dock-side appliances and surfaces and is highly resistance to abrasion and impact. The marine environment is constantly exposed to varying conditions and 1090 offers the utmost protection and adhesion in dry or wet conditions, warm or cold. SigmaShield 1090 should primarily be used on steel and concrete substrates situated in the marine environment.

Product Datasheet

Safety Datasheet

eezee

Ppg 1090 Sigmashield High Build Phenolic Epoxy (grey) Pack Size 15,71 Litres

ppg 1090 sigmashield high build phenolic epoxy (grey) pack size 15,71 litres (abu-abu) ukuran kemasan liter epoksi (kelabu) saiz pek 15.71 高强度酚醛环氧树脂（灰色）包装规格：15.71 环氧胶

ppg-1090-sigmashield-high-build-phenolic-epoxy-grey-pack-size-15-71-litres

Ppg 620 Sigmashield Modified Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres

Two component amine cured high solids epoxy coating.

• Specialized coating for use under SIGMAGLIDE fouling release system
• Excellent impact resistance
• Excellent water resistance

<h3 class="md-block-header-three">Ppg 620 Sigmashield Modified Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>DescriptionTwo component amine cured high solids epoxy coating.Principal Characteristics• Specialized coating for use under SIGMAGLIDE fouling release system • Excellent impact resistance • Excellent water resistance

<h3>Ppg 620 Sigmashield Modified Epoxy ( Black, Grey or Custom Colour) Pack Size 20 Litres</h3>
Description
Two component amine cured high solids epoxy coating.
Principal Characteristics
• Specialized coating for use under SIGMAGLIDE fouling release system 
• Excellent impact resistance 
• Excellent water resistance

ppg 620 sigmashield modified epoxy black, grey custom colour) pack size 20 litres (hitam, abu-abu atau warna kustom) ukuran kemasan liter epoksi hitam, kelabu tersuai) saiz pek 改性环氧树脂（黑色、灰色或定制颜色）包装规格 环氧胶

ppg-620-sigmashield-modified-epoxy-black-grey-or-custom-colour-pack-size-20-litres

Black

Grey

Custom Colour

Colour

FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACC10 #AntiCorrosiveEpoxyCoating #TwoComponentEpoxyCoating

Features:<ul class="md-block-unordered-list-item"><li>Two-component</li><li>High adhesion strength</li><li>Excellent alkali and acid resistance</li></ul>Applications:<ul class="md-block-unordered-list-item"><li>FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.</li></ul>Package:<ul class="md-block-unordered-list-item"><li>10.0 litres per set</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACC10 #AntiCorrosiveEpoxyCoating #TwoComponentEpoxyCoating

&nbsp;Features:
<ul>
<li>Two-component</li>
<li>High adhesion strength</li>
<li>Excellent alkali and acid resistance</li>
</ul>
Applications:
<ul>
<li>FRP storage tanks, pipes, vessels, ducts, and on-site maintenance projects, particularly in chemical processing, pulp and paper operations, including chlorine dioxide bleaching towers.</li>
</ul>
Package:
<ul>
<li>10.0 litres per set</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #SealXpert #ACC10 #AntiCorrosiveEpoxyCoating #TwoComponentEpoxyCoating

Others

BRADY

Cable Ties

Wire Brushes

Cable Carriers

Clearing Drainage Chokes

Painting Tools

Wall Plugs, Anchors, Fixings & Kits

Stationery Tapes

Scrapers

Lubricants

Keith Pey

buyerIntroduction

Sealxpert Anti-Corrosive High Adhesion Two-Component Epoxy Coating ACC10

sealxpert anti-corrosive high adhesion two-component epoxy coating acc10 lapisan epoksi dua komponen adhesi tinggi anti korosif anti-kakisan lekatan salutan sealxpert/密封件 防腐高附着力双组分环氧涂料 环氧胶 密封件

sealxpert-anti-corrosive-high-adhesion-two-component-epoxy-coating-acc10

Ppg SigmaCover 456 Epoxy Finish, All Colours

Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions.
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).

General-purpose epoxy buildcoat or finish for protective coating systems
 

Suitable for steel and concrete in atmospheric land or marine conditions
 

Easy application by airless spray and brush
 

Tolerant of high humidity (up to 95%) during application and curing without loss of quality
 

Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings
 

Can be recoated with two-component and conventional coatings, even after long weathering periods
 

Resistant to water and mild chemical splash
 

Tough and flexible for long-term durability
 

Colours: Standard and custom colours available
 

Epoxy coatings chalk and fade when exposed to sunlight
 

Substrate temperature during application/curing:
 

Minimum: -10°C (14°F), surface must be dry and free of ice
 

Should be at least 3°C (5°F) above dew point
 

In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment)
 

Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention
 

Optimal curing and full product performance achieved only when minimum substrate temperature is reached

<h3 class="md-block-header-three">Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).<h4 class="md-block-header-four">Product Features &amp; Benefits</h4><ul class="md-block-unordered-list-item"><li>General-purpose epoxy buildcoat or finish for protective coating systems </li><li>Suitable for steel and concrete in atmospheric land or marine conditions </li><li>Easy application by airless spray and brush </li><li>Cures down to -10°C (14°F) </li><li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality </li><li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings </li><li>Can be recoated with two-component and conventional coatings, even after long weathering periods </li><li>Resistant to water and mild chemical splash </li><li>Excellent corrosion resistance </li><li>Tough and flexible for long-term durability </li><li>Colours: Standard and custom colours available </li><li>Gloss level: Semi-gloss </li></ul><h4 class="md-block-header-four">Method of Application</h4><ul class="md-block-unordered-list-item"><li>Air spray </li><li>Airless spray </li><li>Brush/Roller </li></ul><h4 class="md-block-header-four">Notes</h4><ul class="md-block-unordered-list-item"><li>Epoxy coatings chalk and fade when exposed to sunlight </li><li>Substrate temperature during application/curing: </li><ul class="md-block-unordered-list-item"><li>Minimum: -10°C (14°F), surface must be dry and free of ice </li><li>Should be at least 3°C (5°F) above dew point </li><li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) </li></ul><li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention </li><li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li></ul>

<h3>Ppg SigmaCover 456 Epoxy Finish, All Colours</h3>
Two-component, high-build, polyamide-cured recoatable epoxy coating for steel and concrete structures exposed to atmospheric land or marine conditions. 
 Key properties: Anticorrosive, water- and mild chemical-resistant, cures even at temperatures down to -10°C (14°F).
<h4>Product Features &amp; Benefits</h4>
<ul>
<li>General-purpose epoxy buildcoat or finish for protective coating systems 
&nbsp;</li>
<li>Suitable for steel and concrete in atmospheric land or marine conditions 
&nbsp;</li>
<li>Easy application by airless spray and brush 
&nbsp;</li>
<li>Cures down to -10°C (14°F) 
&nbsp;</li>
<li>Tolerant of high humidity (up to 95%) during application and curing without loss of quality 
&nbsp;</li>
<li>Good adhesion to most aged, sound alkyd, chlorinated rubber, and epoxy coatings 
&nbsp;</li>
<li>Can be recoated with two-component and conventional coatings, even after long weathering periods 
&nbsp;</li>
<li>Resistant to water and mild chemical splash 
&nbsp;</li>
<li>Excellent corrosion resistance 
&nbsp;</li>
<li>Tough and flexible for long-term durability 
&nbsp;</li>
<li>Colours: Standard and custom colours available 
&nbsp;</li>
<li>Gloss level: Semi-gloss 
&nbsp;</li>
</ul>
<h4>Method of Application</h4>
<ul>
<li>Air spray 
&nbsp;</li>
<li>Airless spray 
&nbsp;</li>
<li>Brush/Roller 
&nbsp;</li>
</ul>
<h4>Notes</h4>
<ul>
<li>Epoxy coatings chalk and fade when exposed to sunlight 
&nbsp;</li>
<li>Substrate temperature during application/curing: 
&nbsp;</li>
<ul>
<li>Minimum: -10°C (14°F), surface must be dry and free of ice 
&nbsp;</li>
<li>Should be at least 3°C (5°F) above dew point 
&nbsp;</li>
<li>In exceptional cases: application possible down to -15°C (5°F), but requires careful control of film thickness to avoid defects (checking, crazing, solvent entrapment) 
&nbsp;</li>
</ul>
<li>Additional thinning may be required at lower temperatures to maintain viscosity, but this can reduce sag resistance and increase solvent retention 
&nbsp;</li>
<li>Optimal curing and full product performance achieved only when minimum substrate temperature is reached</li>
</ul>

ppg sigmacover 456 epoxy finish, colours semua warna epoksi kemasan epoksi, 环氧涂层，所有颜色 环氧胶

ppg-sigmacover-456-epoxy-finish-all-colours

Size

00-A-05

10-B-15 Gardenia

Red Brown

White

Color

Ppg SigmaPrime 700 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L 

PPG SigmaPrime is a two component multipurpose anticorrosive epoxy system (high solids).

PPG Sigmaprime 700 is our premium primer. It is specially designed to suit modern shipyard building practices and provide long-term anticorrosive protection for harsh conditions. It is ideal for use on water ballast tanks and is compliant with IMO PSPC class approval. PPG Sigmaprime 700 is a high quality, multipurpose epoxy anticorrosive with an established proven track record protecting assets from corrosion. When it comes to coating critical areas of a vessel, both owners and shipyards want to be sure that they are getting the most effective product with an established, proven track record. This coating offers excellent and long-lasting cracking resistance, even after multiple immersion and temperature cycles. The excellent performance of the coating provides customers with significant savings by avoiding complex and lengthy repair procedures and by allowing the vessel to immediately resume its commercial operations after inspection. PPG Sigmaprime 700 offers excellent water and corrosion resistance when applied to steel and non-ferrous metals, exhibiting excellent adhesion, flow and wetting properties, as well as outstanding crack resistance and edge retention. Providing exceptional anticorrosive protection due to its excellent adhesive qualities on shop primer, steel (blasted or mechanically pre-treated), aluminium, stainless steel, galvanized steel and hydro-jetted surfaces. PPG Sigmaprime 700 universal primer can also be over-coated with virtually all other coating types, such as

<h3 class="md-block-header-three">Ppg SigmaPrime 700 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L </h3>PPG SigmaPrime is a two component multipurpose anticorrosive epoxy system (high solids).Technical InformationPPG Sigmaprime 700 is our premium primer. It is specially designed to suit modern shipyard building practices and provide long-term anticorrosive protection for harsh conditions. It is ideal for use on water ballast tanks and is compliant with IMO PSPC class approval. PPG Sigmaprime 700 is a high quality, multipurpose epoxy anticorrosive with an established proven track record protecting assets from corrosion. When it comes to coating critical areas of a vessel, both owners and shipyards want to be sure that they are getting the most effective product with an established, proven track record. This coating offers excellent and long-lasting cracking resistance, even after multiple immersion and temperature cycles. The excellent performance of the coating provides customers with significant savings by avoiding complex and lengthy repair procedures and by allowing the vessel to immediately resume its commercial operations after inspection. PPG Sigmaprime 700 offers excellent water and corrosion resistance when applied to steel and non-ferrous metals, exhibiting excellent adhesion, flow and wetting properties, as well as outstanding crack resistance and edge retention. Providing exceptional anticorrosive protection due to its excellent adhesive qualities on shop primer, steel (blasted or mechanically pre-treated), aluminium, stainless steel, galvanized steel and hydro-jetted surfaces. PPG Sigmaprime 700 universal primer can also be over-coated with virtually all other coating types, such as<ol class="md-block-ordered-list-item"><li>Epoxy</li><li>Polyurethane</li><li>Acrylic, alkyd</li><li>Chlorinated rubber</li><li>Vinyl</li><li>Fire retardant.</li></ol>Typical Uses<ul class="md-block-unordered-list-item"><li>Water</li><li>Ballast tanks</li><li>Underwater hull</li><li>Deck</li><li>Superstructure topsides</li><li>Cargo holds</li><li>Cargo tanks interior.</li></ul>ApplicationApplication with air spray.Colours and FinishGrey, Red-Brown, Yellow-Green / Eggshell

<h3>Ppg SigmaPrime 700 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L&nbsp;</h3>
PPG SigmaPrime is a two component multipurpose anticorrosive epoxy system (high solids).
Technical Information
PPG Sigmaprime 700 is our premium primer. It is specially designed to suit modern shipyard building practices and provide long-term anticorrosive protection for harsh conditions. It is ideal for use on water ballast tanks and is compliant with IMO PSPC class approval. PPG Sigmaprime 700 is a high quality, multipurpose epoxy anticorrosive with an established proven track record protecting assets from corrosion. When it comes to coating critical areas of a vessel, both owners and shipyards want to be sure that they are getting the most effective product with an established, proven track record. This coating offers excellent and long-lasting cracking resistance, even after multiple immersion and temperature cycles. The excellent performance of the coating provides customers with significant savings by avoiding complex and lengthy repair procedures and by allowing the vessel to immediately resume its commercial operations after inspection. PPG Sigmaprime 700 offers excellent water and corrosion resistance when applied to steel and non-ferrous metals, exhibiting excellent adhesion, flow and wetting properties, as well as outstanding crack resistance and edge retention. Providing exceptional anticorrosive protection due to its excellent adhesive qualities on shop primer, steel (blasted or mechanically pre-treated), aluminium, stainless steel, galvanized steel and hydro-jetted surfaces. PPG Sigmaprime 700 universal primer can also be over-coated with virtually all other coating types, such as
<ol>
<li>Epoxy</li>
<li>Polyurethane</li>
<li>Acrylic, alkyd</li>
<li>Chlorinated rubber</li>
<li>Vinyl</li>
<li>Fire retardant.</li>
</ol>
Typical Uses
<ul>
<li>Water</li>
<li>Ballast tanks</li>
<li>Underwater hull</li>
<li>Deck</li>
<li>Superstructure topsides</li>
<li>Cargo holds</li>
<li>Cargo tanks interior.</li>
</ul>
Application
Application with air spray.
Colours and Finish
Grey, Red-Brown, Yellow-Green / Eggshell

Ppg SigmaPrime 700 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L

ppg sigmaprime 700 surface tolerant epoxy abrasion resist, yellow green grey redbrown 20 tahan abrasi permukaan, kuning hijau abu-abu merah cokelat epoksi lelasan kelabu coklat 表面耐受环氧耐磨涂料，黄绿色/灰色/红棕色 环氧胶

ppg-sigmaprime-700-surface-tolerant-epoxy-abrasion-resist-yellow-green-grey-redbrown-20-l

Red Brown 2008

Ppg SigmaPrime 200 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L 

PPG SigmaPrime 200 is a two component multipurpose anti-corrosive epoxy system.

This universal anti-corrosive epoxy primer is based upon pure epoxy technology. Suitable for use in many areas including, ballast tanks, decks, topside, super-structures providing the ultimate protection to water damage and corrosion, industrially or in coastal/marine environments. SigmaPrime 200 is quick drying in just 1.5 hours and can be over coated with a wide range of suitable products after only 2.5 hours.

• Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo holds • Excellent anticorrosive properties and water resistance • Surface tolerant primer • Good chemical resistance • Good abrasion resistance for dedicated areas of application • Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals • Excellent recoatability • Suitable for application and curing in a wide range of climatic conditions • Suitable for bulk supply and twin feed application • Suitable on wet blast cleaned substrates (damp or dry)

Available in both green and grey, achieving an egg-shell finish.

<h3 class="md-block-header-three">Ppg SigmaPrime 200 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L </h3>PPG SigmaPrime 200 is a two component multipurpose anti-corrosive epoxy system.Product InformationThis universal anti-corrosive epoxy primer is based upon pure epoxy technology. Suitable for use in many areas including, ballast tanks, decks, topside, super-structures providing the ultimate protection to water damage and corrosion, industrially or in coastal/marine environments. SigmaPrime 200 is quick drying in just 1.5 hours and can be over coated with a wide range of suitable products after only 2.5 hours.Where To Use• Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo holds • Excellent anticorrosive properties and water resistance • Surface tolerant primer • Good chemical resistance • Good abrasion resistance for dedicated areas of application • Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals • Excellent recoatability • Suitable for application and curing in a wide range of climatic conditions • Suitable for bulk supply and twin feed application • Suitable on wet blast cleaned substrates (damp or dry)Colour and finishAvailable in both green and grey, achieving an egg-shell finish.

<h3>Ppg SigmaPrime 200 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L&nbsp;</h3>
PPG SigmaPrime 200 is a two component multipurpose anti-corrosive epoxy system.
Product Information
This universal anti-corrosive epoxy primer is based upon pure epoxy technology. Suitable for use in many areas including, ballast tanks, decks, topside, super-structures providing the ultimate protection to water damage and corrosion, industrially or in coastal/marine environments. SigmaPrime 200 is quick drying in just 1.5 hours and can be over coated with a wide range of suitable products after only 2.5 hours.
Where To Use
• Universal epoxy primer system suitable for ballast tanks, deck, topside, superstructure, hull, cargo oil tanks and cargo holds • Excellent anticorrosive properties and water resistance • Surface tolerant primer • Good chemical resistance • Good abrasion resistance for dedicated areas of application • Excellent adhesion to steel, shop primer, galvanized steel and non-ferrous metals • Excellent recoatability • Suitable for application and curing in a wide range of climatic conditions • Suitable for bulk supply and twin feed application • Suitable on wet blast cleaned substrates (damp or dry)
Colour and finish
Available in both green and grey, achieving an egg-shell finish.

Ppg SigmaPrime 200 Surface Tolerant Epoxy Abrasion Resist, Yellow Green / Grey / Redbrown 20 L

ppg sigmaprime 200 surface tolerant epoxy abrasion resist, yellow green grey redbrown 20 tahan abrasi permukaan, kuning hijau abu-abu merah cokelat epoksi lelasan kelabu coklat 表面耐受环氧耐磨涂料，黄绿色/灰色/红棕色 环氧胶

ppg-sigmaprime-200-surface-tolerant-epoxy-abrasion-resist-yellow-green-grey-redbrown-20-l

Green

Ppg 350 Sigmacover Suface Tolerant Epoxy (Grey) Pack Size 20 Litres

PPG Sigmacover 350 is a surface tolerant primer/coating used in the Marine and Protective Coatings industry such as the top side of boats and ships. Sigmacover 350 can be tinted to most BS and RAL colours.

Sigmacover 350 (Formally SigmaCover 2AL and Amerlock 2AL) has been developed by PPG as a surface tolerant primer or top coat predominately for marine applications requiring good impact and abrasion resistance, as well as other harsh environments that require protective coatings. Sigmacover 350 is a two component epoxy coating that is suitable for use on the topside of ships and boats. This will include the superstructure decks and cargo holds.

Sigmacover 350 can be applied to steel that has been blast cleaned to ISO-Sa21⁄2 for excellent corrosion protection, a blasting profile of 40 -70 microns (1.6 - 2.8 mils) is required. In addition, coated steel can be hydro-jetted to VIS WJ2/3L and existing sound epoxy systems and most sound alkyd coating system can be coated providing they have been sufficiently roughened.

Sigmacover 350 offers an unlimited overcoating interval providing the surface is free from chalking and other contamination's. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to produce a good key this will ensure good adhesion of the subsequent coating.

<h3 class="md-block-header-three">Ppg 350 Sigmacover Suface Tolerant Epoxy (Grey) Pack Size 20 Litres</h3>PPG Sigmacover 350 is a surface tolerant primer/coating used in the Marine and Protective Coatings industry such as the top side of boats and ships. Sigmacover 350 can be tinted to most BS and RAL colours.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>Sigmacover 350 (Formally SigmaCover 2AL and Amerlock 2AL) has been developed by PPG as a surface tolerant primer or top coat predominately for marine applications requiring good impact and abrasion resistance, as well as other harsh environments that require protective coatings. Sigmacover 350 is a two component epoxy coating that is suitable for use on the topside of ships and boats. This will include the superstructure decks and cargo holds.<ul class="md-block-unordered-list-item"><li>Application</li></ul>Sigmacover 350 can be applied to steel that has been blast cleaned to ISO-Sa21⁄2 for excellent corrosion protection, a blasting profile of 40 -70 microns (1.6 - 2.8 mils) is required. In addition, coated steel can be hydro-jetted to VIS WJ2/3L and existing sound epoxy systems and most sound alkyd coating system can be coated providing they have been sufficiently roughened.Sigmacover 350 offers an unlimited overcoating interval providing the surface is free from chalking and other contamination&#x27;s. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to produce a good key this will ensure good adhesion of the subsequent coating.

<h3>Ppg 350 Sigmacover Suface Tolerant Epoxy (Grey) Pack Size 20 Litres</h3>
PPG Sigmacover 350 is a surface tolerant primer/coating used in the Marine and Protective Coatings industry such as the top side of boats and ships. Sigmacover 350 can be tinted to most BS and RAL colours.
<ul>
<li>Best Uses</li>
</ul>
Sigmacover 350 (Formally SigmaCover 2AL and Amerlock 2AL) has been developed by PPG as a surface tolerant primer or top coat predominately for marine applications requiring good impact and abrasion resistance, as well as other harsh environments that require protective coatings. Sigmacover 350 is a two component epoxy coating that is suitable for use on the topside of ships and boats. This will include the superstructure decks and cargo holds.
<ul>
<li>Application</li>
</ul>
Sigmacover 350 can be applied to steel that has been blast cleaned to ISO-Sa21⁄2 for excellent corrosion protection, a blasting profile of 40 -70 microns (1.6 - 2.8 mils) is required. In addition, coated steel can be hydro-jetted to VIS WJ2/3L and existing sound epoxy systems and most sound alkyd coating system can be coated providing they have been sufficiently roughened.
Sigmacover 350 offers an unlimited overcoating interval providing the surface is free from chalking and other contamination's. In cases of exposure to direct sunlight or when the surface is contaminated it is recommended that the surface be cleaned and roughened to produce a good key this will ensure good adhesion of the subsequent coating.

Ppg 350 Sigmacover Suface Tolerant Epoxy (grey) Pack Size 20 Litres

ppg 350 sigmacover suface tolerant epoxy (grey) pack size 20 litres tahan permukaan (abu-abu) ukuran kemasan liter epoksi (kelabu) saiz pek 表面耐受环氧树脂（灰色）包装规格 环氧胶

ppg-350-sigmacover-suface-tolerant-epoxy-grey-pack-size-20-litres

A premium-grade, steel-filled liquid epoxy designed for demanding industrial repair and reinforcement applications. This two-component system offers superior flowability for filling, levelling and wet-out applications. Ideal for use with carbon fiber or E-glass wraps, it excels in high-pressure and high-temperature environments. Its liquid form makes it ideal for repairing hard-to-reach areas or replicating precise surface contours.

Steel-filled, flowable two-component epoxy system

Wet-out agent for carbon fiber or E-glass in structural repairs

Resistant to high pressure and elevated temperatures

Ideal for levelling, surface repairs, and precision molding

Suitable for hard-to-reach or complex areas

Cures to a strong, durable finish suitable for industrial use

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #supportlocalsg #supportlocalbusiness #LiquidEpoxy #SteelEpoxy #FixNFast #EpoxyRepair #HighTempEpoxy #CarbonFiberWrap #EquipmentRepair #FlowableEpoxy #IndustrialMaintenance #PrecisionMolding

A premium-grade, steel-filled liquid epoxy designed for demanding industrial repair and reinforcement applications. This two-component system offers superior flowability for filling, levelling and wet-out applications. Ideal for use with carbon fiber or E-glass wraps, it excels in high-pressure and high-temperature environments. Its liquid form makes it ideal for repairing hard-to-reach areas or replicating precise surface contours.Key Features<ul class="md-block-unordered-list-item"><li>Steel-filled, flowable two-component epoxy system</li><li>Wet-out agent for carbon fiber or E-glass in structural repairs</li><li>Resistant to high pressure and elevated temperatures</li><li>Ideal for levelling, surface repairs, and precision molding</li><li>Suitable for hard-to-reach or complex areas</li><li>Cures to a strong, durable finish suitable for industrial use</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #supportlocalsg #supportlocalbusiness #LiquidEpoxy #SteelEpoxy #FixNFast #EpoxyRepair #HighTempEpoxy #CarbonFiberWrap #EquipmentRepair #FlowableEpoxy #IndustrialMaintenance #PrecisionMolding

A premium-grade, steel-filled liquid epoxy designed for demanding industrial repair and reinforcement applications. This two-component system offers superior flowability for filling, levelling and wet-out applications. Ideal for use with carbon fiber or E-glass wraps, it excels in high-pressure and high-temperature environments. Its liquid form makes it ideal for repairing hard-to-reach areas or replicating precise surface contours.
Key Features
<ul>
<li>Steel-filled, flowable two-component epoxy system</li>
<li>Wet-out agent for carbon fiber or E-glass in structural repairs</li>
<li>Resistant to high pressure and elevated temperatures</li>
<li>Ideal for levelling, surface repairs, and precision molding</li>
<li>Suitable for hard-to-reach or complex areas</li>
<li>Cures to a strong, durable finish suitable for industrial use</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #supportlocalsg #supportlocalbusiness #LiquidEpoxy #SteelEpoxy #FixNFast #EpoxyRepair #HighTempEpoxy #CarbonFiberWrap #EquipmentRepair #FlowableEpoxy #IndustrialMaintenance #PrecisionMolding

RJ LONDON PAINT

Viro

Dong A Bestech

Papaiz

Dhes

ATLAS FILTRI

Padlocks & Lockout Devices

Bathroom Accessories

Bathroom & Kitchen Faucets

Ropes & Chains

Ball Valve

Bags, Filters & Accessories

Threadlocker

Leak Repair

Fix ‘n’ Fast Bond FFP111 Liquid Repair Epoxy Putty - High Performance System

fix ‘n’ fast bond ffp111 liquid repair epoxy putty high performance system sistem berkinerja tinggi epoksi others betulkan 'n' pembaikan cecair dempul berprestasi 液体修补环氧腻子 高性能系统 环氧胶

fix-n-fast-bond-ffp111-liquid-repair-epoxy-putty-high-performance-system

454gm

Weight

Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres

PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.

SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.

Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.

SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

<h3 class="md-block-header-three">Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres</h3><ul class="md-block-unordered-list-item"><li>Product Details</li></ul>PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.<ul class="md-block-unordered-list-item"><li>Best Uses</li></ul>SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.<ul class="md-block-unordered-list-item"><li>Application</li></ul>Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.<ul class="md-block-unordered-list-item"><li>Surface and Environment</li></ul>SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

<h3>Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (Pink, Grey) Pack Size 20 Litres</h3>
<ul>
<li>Product Details</li>
</ul>
PPG SigmaTherm 230 is a two component high build heat resistant phenolic epoxy coating designed for use under insulation systems to provide heat protection of up to 230°C.
<ul>
<li>Best Uses</li>
</ul>
SigmaTherm 230 is a high performance, heat resistant product that provides protection to a variety of metal substrates. PPG SigmaTherm 230 is ideally suited for application to pipes, radiators and low heat engines to aid the protection of the surface and surrounding area.
<ul>
<li>Application</li>
</ul>
Blast clean steel to ISO-Sa2.5 with a blasting profile of 40 - 70 microns. The substrate must be perfectly dry before and during application. Degrease stainless steel with solvents and sweep blast. The temperature of the mixed base and hardener should be above 15°C otherwise extra thinner may be required. Adding to much thinner results in reduced sag resistance. Allow sufficient induction time as per data sheet.
<ul>
<li>Surface and Environment</li>
</ul>
SigmaTherm 230 is a high performance product that provides surfaces with a high glossy finish to aid protection and offer a level of decoration with an aluminium effect. SigmaTherm 230 should ideally be used internally to offer heat resistance to appliances of up to 230°C.

Ppg 230 Sigmatherm Epoxy Phenolic up to Dry Temp 200 or 300degC (pink, Grey) Pack Size 20 Litres

ppg 230 sigmatherm epoxy phenolic dry temp 200 300degc (pink, grey) pack size 20 litres hingga suhu kering atau 300 derajat celcius (merah muda, abu-abu) ukuran kemasan liter epoksi sehingga jambu, kelabu) saiz pek 环氧酚醛树脂，干燥温度高达 摄氏度（粉色、灰色）包装规格 环氧胶

ppg-230-sigmatherm-epoxy-phenolic-up-to-dry-temp-200-or-300degc-pink-grey-pack-size-20-litres

Pink

FIX ‘N’ FAST FFP101 is a premium-grade, steel-filled, two-component epoxy putty engineered for fast, economical, and durable repairs. It functions as a structural adhesive and gap filler, ideal for restoring worn or damaged components in machinery, pipes, and equipment. Commonly used in industrial maintenance and pipe reinforcement, it bonds securely to ferrous and non-ferrous metals. Once cured, it can be machined, drilled, tapped, or sanded to match required specifications.

Reinforces damaged surfaces or fills voids with structural integrity

Exceptional adhesion and compressive strength

Excellent resistance to chemicals including acids, alkalis, and solvents

Room temperature curing (23°C – 25°C) for field or shop applications

Bonds well to metals, including steel, iron, aluminium and copper

Fully machinable after cure for precision applications

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #supportlocalsg #supportlocalbusiness #EpoxyPutty #SteelRepair #FixNFast #IndustrialRepair #EpoxySolutions #MaintenanceTools #MachineryRepair #TwoComponentEpoxy #PipeReinforcement #ChemicalResistantAdhesive

FIX ‘N’ FAST FFP101 is a premium-grade, steel-filled, two-component epoxy putty engineered for fast, economical, and durable repairs. It functions as a structural adhesive and gap filler, ideal for restoring worn or damaged components in machinery, pipes, and equipment. Commonly used in industrial maintenance and pipe reinforcement, it bonds securely to ferrous and non-ferrous metals. Once cured, it can be machined, drilled, tapped, or sanded to match required specifications.Key Features:<ul class="md-block-unordered-list-item"><li>Reinforces damaged surfaces or fills voids with structural integrity</li><li>Exceptional adhesion and compressive strength</li><li>Excellent resistance to chemicals including acids, alkalis, and solvents</li><li>Room temperature curing (23°C – 25°C) for field or shop applications</li><li>Bonds well to metals, including steel, iron, aluminium and copper</li><li>Fully machinable after cure for precision applications</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #supportlocalsg #supportlocalbusiness #EpoxyPutty #SteelRepair #FixNFast #IndustrialRepair #EpoxySolutions #MaintenanceTools #MachineryRepair #TwoComponentEpoxy #PipeReinforcement #ChemicalResistantAdhesive

FIX ‘N’ FAST FFP101 is a premium-grade, steel-filled, two-component epoxy putty engineered for fast, economical, and durable repairs. It functions as a structural adhesive and gap filler, ideal for restoring worn or damaged components in machinery, pipes, and equipment. Commonly used in industrial maintenance and pipe reinforcement, it bonds securely to ferrous and non-ferrous metals. Once cured, it can be machined, drilled, tapped, or sanded to match required specifications.
Key Features:
<ul>
<li>Reinforces damaged surfaces or fills voids with structural integrity</li>
<li>Exceptional adhesion and compressive strength</li>
<li>Excellent resistance to chemicals including acids, alkalis, and solvents</li>
<li>Room temperature curing (23°C – 25°C) for field or shop applications</li>
<li>Bonds well to metals, including steel, iron, aluminium and copper</li>
<li>Fully machinable after cure for precision applications</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #supportlocalsg #supportlocalbusiness #EpoxyPutty #SteelRepair #FixNFast #IndustrialRepair #EpoxySolutions #MaintenanceTools #MachineryRepair #TwoComponentEpoxy #PipeReinforcement #ChemicalResistantAdhesive

Fix ‘n’ Fast FFP101 Steel Repair Epoxy Putty - High Performance System

fix ‘n’ fast ffp101 steel repair epoxy putty high performance system dempul perbaikan baja sistem berkinerja tinggi epoksi others betulkan 'n' pembaikan keluli berprestasi 钢结构修补环氧腻子 高性能系统 环氧胶

fix-n-fast-ffp101-steel-repair-epoxy-putty-high-performance-system

Reduces viscosity of PPG coatings for spray, brush, or roller application

Cleans equipment and brushes after use (brushes used with 2-pack paints are recommended to be discarded)

Compatibility: Formulated for use with selected PPG Protective & Marine Coatings (check datasheet for suitability)

Best Uses: Thinning coatings for smoother application; equipment cleaning

Recommended dosage: 1–10% depending on coating and method

<h3 class="md-block-header-three">PPG Thinner 91-92, For Epoxy, Clear</h3><ul class="md-block-unordered-list-item"><li>Type: Solvent-based thinner (clear)</li><li>Function:</li><ul class="md-block-unordered-list-item"><li>Reduces viscosity of PPG coatings for spray, brush, or roller application</li><li>Suitable for airless spray applications</li><li>Cleans equipment and brushes after use (brushes used with 2-pack paints are recommended to be discarded)</li></ul><li>Compatibility: Formulated for use with selected PPG Protective &amp; Marine Coatings (check datasheet for suitability)</li><li>Best Uses: Thinning coatings for smoother application; equipment cleaning</li></ul>Application:<ul class="md-block-unordered-list-item"><li>Add gradually while stirring</li><li>Recommended dosage: 1–10% depending on coating and method</li></ul>

<h3>PPG Thinner 91-92, For Epoxy, Clear</h3>
<ul>
<li>Type: Solvent-based thinner (clear)</li>
<li>Function:</li>
<ul>
<li>Reduces viscosity of PPG coatings for spray, brush, or roller application</li>
<li>Suitable for airless spray applications</li>
<li>Cleans equipment and brushes after use (brushes used with 2-pack paints are recommended to be discarded)</li>
</ul>
<li>Compatibility: Formulated for use with selected PPG Protective &amp; Marine Coatings (check datasheet for suitability)</li>
<li>Best Uses: Thinning coatings for smoother application; equipment cleaning</li>
</ul>
Application:
<ul>
<li>Add gradually while stirring</li>
<li>Recommended dosage: 1–10% depending on coating and method</li>
</ul>

Safety Data

Technical Data

Ppg Thinner 91-92, for Epoxy, Clear

ppg thinner 91-92, epoxy, clear untuk bening paint thinners, solvents cleaners pengencer cat, pelarut pembersih epoksi, jelas pencair, cat ppg稀释剂91-92，适用于环氧树脂，透明 涂料稀释剂，溶剂和清洁剂

ppg-thinner-91-92-for-epoxy-clear

5 Litres

20 Litres

Package Size

Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge

100°C / 212°F Maximum continuous operating temperature*

 * For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa. 

Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.

Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.

The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.

Suitable for metal and composite bonding, good adhesion onto polyamides

Contains spacers to ensure a minimum bond line thickness of 0.05 mm

Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.

For additional information, consult the TDS and SDS.

It is particularly suitable for GRP, CFRP and SMC bonding.

<h3 class="md-block-header-three">Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge</h3> Performance Specifications<ul class="md-block-unordered-list-item"><li>Two-component Epoxy Technology</li><li>60 mins Pot life at RT</li><li>3 hrs Fixture time at RT</li><li>10 mm Gap filling</li><li>100°C / 212°F Maximum continuous operating temperature*</li><li>23 MPa / 3,335 psi Tensile strength</li><li>1 000 MPa / 145,038 psi Tensile modulus</li><li>ca. 12% Elongation at break</li><li> * For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa. </li></ul>Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.Embedded with spacers (glass beads) it retains it&#x27;s integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our &#x27;it&#x27;s good&#x27; seal of approval.Key Features<ul class="md-block-unordered-list-item"><li>Thixotropic - non slumping</li><li>Toughened adhesive, resilient bond</li><li>Suitable for metal and composite bonding, good adhesion onto polyamides</li><li>High Resistance to chemicals </li><li>Low shrinkage</li><li>Contains spacers to ensure a minimum bond line thickness of 0.05 mm</li></ul>Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.For additional information, consult the TDS and SDS.It is particularly suitable for GRP, CFRP and SMC bonding.

<h3><ins>Araldite 2031-1 Epoxy Paste Structural Adhesive - 380ml cartridge</ins></h3>
&nbsp;Performance Specifications
<ul>
<li>Two-component Epoxy Technology</li>
<li>60 mins Pot life at RT</li>
<li>3 hrs Fixture time at RT</li>
<li>10 mm Gap filling</li>
<li>100°C / 212°F Maximum continuous operating temperature*</li>
<li>23 MPa / 3,335 psi Tensile strength</li>
<li>1 000 MPa / 145,038 psi Tensile modulus</li>
<li>ca. 12% Elongation at break</li>
<li>&nbsp;* For the maximum continuous operating temperature, we consider the maximum temperature for which the residual lap shear strength is 1/3 of the lap shear strength at room temperature or the temperature for which the residual lap shear strength is 5 MPa.&nbsp;</li>
</ul>
Araldite® 2031-1 is a 1:1 mix ratio, black, toughened, thixotropic (non-slumping up to 10mm thickness) adhesive suitable for metal and composite bonding with good adhesion on Polyamides. It has low shrinkage characteristics and a high chemical resistance.
Embedded with spacers (glass beads) it retains it's integrity well, will not sag/gap or run, and has enhanced bond strength at larger bondlines.  It is particularly suitable for GRP (Glass Reinforced Plastics) Polyamide and SMC (Sheet Molded Compounds) bonding.
The 380ml Cartridges are 1:1 ratio, and are designed to work best with a 380ml cartridge Dispenser with a 1:1 ratio plunger.  We strongly advise you use a 380ml Dispenser WITH a 1:1 ratio plunger for this cartridges.  If you do not have one, please check out our 1:1 ratio Dispensers, all are excellent products and have our 'it's good' seal of approval.
Key Features
<ul>
<li>Thixotropic - non slumping</li>
<li>Toughened adhesive, resilient bond</li>
<li>Suitable for metal and composite bonding, good adhesion onto polyamides</li>
<li>High Resistance to chemicals </li>
<li>Low shrinkage</li>
<li>Contains spacers to ensure a minimum bond line thickness of 0.05 mm</li>
</ul>
Araldite 2031 may be stored for up to 3 years at room temperature provided the components are stored in sealed containers. The expiry date is indicated on the label.
For additional information, consult the TDS and SDS.
It is particularly suitable for GRP, CFRP and SMC bonding.

Araldite 2031-1 2-part Epoxy Paste Structural Adhesive - 380ml Cartridge

araldite 2031-1 2-part epoxy paste structural adhesive 380ml cartridge perekat struktural pasta epoksi bagian kartrid glue lem bahagian pes pelekat struktur kartrij gam 部分环氧糊状结构胶 墨盒 胶水 爱牢达