Iwata

RS Pro

Mechanical Parts

mechanical-parts

O Ring

o-ring

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 40mm X Outer Diameter 50mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 40mm X Outer Diameter 50mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 40mmOD: 50mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 40mm X Outer Diameter 50mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 40mm
OD: 50mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Rubber Seals

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 40mm X Outer Diameter 50mm, Pack of 10

iwata shim ring, inner diameter 40mm outer 50mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 40 毫米 外径 50 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-40mm-x-outer-diameter-50mm-pack-of-10

Carbon Steel ID 40mm x OD 50mm x 0.10mm PN RF040050010, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 50mm x 0.15mm PN RF040050015, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 50mm x 0.20mm PN RF040050020, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 50mm x 0.30mm PN RF040050030, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 50mm x 0.50mm PN RF040050050, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 50mm x 1mm PN RF040050100, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 0.05mm PN RB040050005, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 0.10mm PN RB040050010, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 0.15mm PN RB040050015, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 0.20mm PN RB040050020, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 0.30mm PN RB040050030, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 0.50mm PN RB0040050050, Pack of 10 Pieces

Brass ID 40mm x OD 50mm x 1mm PN RB040050100, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.01mm PN RS040050001, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.02mm PN RS040050002, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.03mm PN RS040050003, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.05mm PN RS040050005, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.10mm PN RS040050010, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.15mm PN RS040050015, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.20mm PN RS040050020, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.30mm PN RS040050030, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 0.50mm PN RS040050050, Pack of 10 Pieces

304 SST ID 40mm x OD 50mm x 1mm PN RS040050100, Pack of 10 Pieces

Material

Shim Ring, Inner Diameter 28mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 28mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 28mmOD: 40mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 28mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 28mm
OD: 40mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 28mm X Outer Diameter 40mm, Pack of 10

iwata shim ring, inner diameter 28mm outer 40mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 28 毫米 外径 40 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-28mm-x-outer-diameter-40mm-pack-of-10

Carbon Steel ID 28mm x OD 40mm x 0.10mm PN RF028040010, Pack of 10 Pieces

Carbon Steel ID 28mm x OD 40mm x 0.15mm PN RF028040015, Pack of 10 Pieces

Carbon Steel ID 28mm x OD 40mm x 0.20mm PN RF028040020, Pack of 10 Pieces

Carbon Steel ID 28mm x OD 40mm x 0.30mm PN RF028040030, Pack of 10 Pieces

Carbon Steel ID 28mm x OD 40mm x 0.50mm PN RF028040050, Pack of 10 Pieces

Carbon Steel ID 28mm x OD 40mm x 1mm PN RF028040100, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 0.05mm PN RB028040005, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 0.10mm PN RB028040010, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 0.15mm PN RB028040015, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 0.20mm PN RB028040020, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 0.30mm PN RB028040030, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 0.50mm PN RB0028040050, Pack of 10 Pieces

Brass ID 28mm x OD 40mm x 1mm PN RB028040100, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.01mm PN RS028040001, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.02mm PN RS028040002, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.03mm PN RS028040003, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.05mm PN RS028040005, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.10mm PN RS028040010, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.15mm PN RS028040015, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.20mm PN RS028040020, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.30mm PN RS028040030, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 0.50mm PN RS028040050, Pack of 10 Pieces

304 SST ID 28mm x OD 40mm x 1mm PN RS028040100, Pack of 10 Pieces

Shim Ring, Inner Diameter 40mm X Outer Diameter 55mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 40mm X Outer Diameter 55mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 40mmOD: 55mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 40mm X Outer Diameter 55mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 40mm
OD: 55mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 40mm X Outer Diameter 55mm, Pack of 10

iwata shim ring, inner diameter 40mm outer 55mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 40 毫米 外径 55 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-40mm-x-outer-diameter-55mm-pack-of-10

Carbon Steel ID 40mm x OD 55mm x 0.10mm PN RF040055010, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 55mm x 0.15mm PN RF040055015, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 55mm x 0.20mm PN RF040055020, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 55mm x 0.30mm PN RF040055030, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 55mm x 0.50mm PN RF040055050, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 55mm x 1mm PN RF040055100, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 0.05mm PN RB040055005, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 0.10mm PN RB040055010, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 0.15mm PN RB040055015, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 0.20mm PN RB040055020, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 0.30mm PN RB040055030, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 0.50mm PN RB0040055050, Pack of 10 Pieces

Brass ID 40mm x OD 55mm x 1mm PN RB040055100, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.01mm PN RS040055001, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.02mm PN RS040055002, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.03mm PN RS040055003, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.05mm PN RS040055005, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.10mm PN RS040055010, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.15mm PN RS040055015, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.20mm PN RS040055020, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.30mm PN RS040055030, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 0.50mm PN RS040055050, Pack of 10 Pieces

304 SST ID 40mm x OD 55mm x 1mm PN RS040055100, Pack of 10 Pieces

Shim Ring, Inner Diameter 30mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 30mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 30mmOD: 40mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 30mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 30mm
OD: 40mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 30mm X Outer Diameter 40mm, Pack of 10

iwata shim ring, inner diameter 30mm outer 40mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 30 毫米 外径 40 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-30mm-x-outer-diameter-40mm-pack-of-10

Carbon Steel ID 30mm x OD 40mm x 0.10mm PN RF030040010, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 40mm x 0.15mm PN RF030040015, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 40mm x 0.20mm PN RF030040020, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 40mm x 0.30mm PN RF030040030, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 40mm x 0.50mm PN RF030040050, Pack of 10 Pieces

Carbon Steel ID 30mm x OD 40mm x 1mm PN RF030040100, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 0.05mm PN RB030040005, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 0.10mm PN RB030040010, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 0.15mm PN RB030040015, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 0.20mm PN RB030040020, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 0.30mm PN RB030040030, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 0.50mm PN RB0030040050, Pack of 10 Pieces

Brass ID 30mm x OD 40mm x 1mm PN RB030040100, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.01mm PN RS030040001, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.02mm PN RS030040002, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.03mm PN RS030040003, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.05mm PN RS030040005, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.10mm PN RS030040010, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.15mm PN RS030040015, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.20mm PN RS030040020, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.30mm PN RS030040030, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 0.50mm PN RS030040050, Pack of 10 Pieces

304 SST ID 30mm x OD 40mm x 1mm PN RS030040100, Pack of 10 Pieces

Shim Ring, Inner Diameter 40mm X Outer Diameter 60mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 40mm X Outer Diameter 60mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 40mmOD: 60mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 40mm X Outer Diameter 60mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 40mm
OD: 60mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 40mm X Outer Diameter 60mm, Pack of 10

iwata shim ring, inner diameter 40mm outer 60mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 40 毫米 外径 60 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-40mm-x-outer-diameter-60mm-pack-of-10

Carbon Steel ID 40mm x OD 60mm x 0.10mm PN RF040060010, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 60mm x 0.15mm PN RF040060015, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 60mm x 0.20mm PN RF040060020, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 60mm x 0.30mm PN RF040060030, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 60mm x 0.50mm PN RF040060050, Pack of 10 Pieces

Carbon Steel ID 40mm x OD 60mm x 1mm PN RF040060100, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 0.05mm PN RB040060005, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 0.10mm PN RB040060010, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 0.15mm PN RB040060015, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 0.20mm PN RB040060020, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 0.30mm PN RB0400560030, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 0.50mm PN RB0040060050, Pack of 10 Pieces

Brass ID 40mm x OD 60mm x 1mm PN RB040060100, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.01mm PN RS040060001, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.02mm PN RS040060002, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.03mm PN RS040060003, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.05mm PN RS040060005, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.10mm PN RS040060010, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.15mm PN RS040060015, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.20mm PN RS040060020, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.30mm PN RS040060030, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 0.50mm PN RS040060050, Pack of 10 Pieces

304 SST ID 40mm x OD 60mm x 1mm PN RS040060100, Pack of 10 Pieces

Shim Ring, Inner Diameter 22mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

<h3 class="md-block-header-three">Shim Ring, Inner Diameter 22mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.Purpose And UsageThey serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.TolerancesBased on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. Available ThicknessFlat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.Product Description: Shim Ring (Also known as Shim Washer)Manufacturer: Iwata Manufacturing Co., LtdMaterials: Carbon Steel (SPCC), Brass and 304 Stainless SteelID: 22mmOD: 40mmThickness: 0.01mm to 1mm.Quantity Per Package: 10 pcsCountry of Origin: Japan

<h3>Shim Ring, Inner Diameter 22mm X Outer Diameter 40mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</h3>
Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.
Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.
Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.
Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.
Purpose And Usage
They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.
Tolerances
Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!
Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 
In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 
Available Thickness
Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.
Product Description: Shim Ring (Also known as Shim Washer)
Manufacturer: Iwata Manufacturing Co., Ltd
Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel
ID: 22mm
OD: 40mm
Thickness: 0.01mm to 1mm.
Quantity Per Package: 10 pcs
Country of Origin: Japan

Iwata Shim Ring, Inner Diameter 22mm X Outer Diameter 40mm, Pack of 10

iwata shim ring, inner diameter 22mm outer 40mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 22 毫米 外径 40 毫米，10 个一包 岩田

iwata-shim-ring-inner-diameter-22mm-x-outer-diameter-40mm-pack-of-10

Carbon Steel ID 22mm x OD 40mm x 0.10mm PN RF022040010, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 40mm x 0.15mm PN RF022040015, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 40mm x 0.20mm PN RF022040020, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 40mm x 0.30mm PN RF022040030, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 40mm x 0.50mm PN RF022040050, Pack of 10 Pieces

Carbon Steel ID 22mm x OD 40mm x 1mm PN RF022040100, Pack of 10 Pieces

Brass ID 22mm x OD 40mm x 0.05mm PN RB022040005, Pack of 10 Pieces

Brass ID 22mm x OD 40mm x 0.10mm PN RB022040010, Pack of 10 Pieces

Brass ID 22mm x OD 40mm x 0.15mm PN RB0220340015, Pack of 10 Pieces