Lumberg Automation

Electrical Connectors

electrical-connectors

Circular Connectors

circular-connectors

Industrial Automation and Control

industrial-automation-and-control

 IO-Link Master

io-link-master

Lumberg Automation 934879004 0980 ESL 399-121 LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm 

Protocol: Multiprotocol, PROFINET, EtherNet/IP

Power Connection (System Supply): M12 Power, 5-poles, L-coded

I/O Type: Digital Input/Digital Output/IO-Link

Protection Degree / IP Rating: IP65, IP67, IP69K

Dimensions (W x H x D): 60 mm x 31 mm x 200 mm

Ambient Temperature (Operation): -20 °C to 70 °C

Ambient Temperature (Storage/Transport): -25 °C to 85 °C

Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)

Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)

Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)

Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)

Protection Class: III, IEC 61140, EN 61140, VDE 0140-1

Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1

Mean Time To Failure (MTTF): 574 years (acc. to Telcordia SR-332, 2011 at 20°C)

Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated

Mounting: 2-hole screw mounting with M4 x 25 / 30 screws and toothed lock washers (per DIN 125) and self-locking nuts

Performance Class: RT (switch supports IRT)

Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex

Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing

Media Redundancy Protocol (MRP): MRP client

Easy Device Replacement: Supported, based on LLDP

Network Protocols: ARP, HTTP, Ping, SNMP V1, TCP/IP

Specification: CIP V3.1x, EIP Adaption of CIP V1.1x

Cycle Time / Requested Packet Interval (RPI): min. 1 ms

Addressing: BootP, DHCP, Rotary Address Switches

Connection Types: Exclusive Owner, Input Only, Listen Only

Supported Network Protocols: ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP

Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Module Supply Voltage (Range): 18 V DC to 30 V DC

Current Consumption (typ.): 180 mA (at 24 V DC)

Status Indicator (System Supply): LED green

Current Carrying Capacity: max. 16 A per connector

Number of IO-Link Master Channels: max. 8, configurable

2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)

Perm. Conductor Length to Device: ≤ 20 m

<h3 class="md-block-header-three">Lumberg Automation 934879004 0980 ESL 399-121 LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm </h3><ul class="md-block-unordered-list-item"><li>I/O Systems: Active - Standalone</li><li>Product Sub Family: LioN-P</li><li>Item Description: 0980 ESL 399-121</li><li>Device Type: IO-Link Master</li><li>Protocol: Multiprotocol, PROFINET, EtherNet/IP</li><li>I/O Function: 4DI, 4DO, 8IOL</li><li>Bus Connection: M12, 4-poles, D-coded</li><li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li><li>I/O Connection: M12, 5-poles, A-coded</li><li>I/O Type: Digital Input/Digital Output/IO-Link</li></ul><h3 class="md-block-header-three">General Data</h3><ul class="md-block-unordered-list-item"><li>Housing Material: Metal, Zinc Die-cast</li><li>Housing Plating: Nickel, matt</li><li>Housing Color: Grey Metallic</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Potted: Yes</li><li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li><li>Weight: 500 g</li><li>Ambient Temperature (Operation): -20 °C to 70 °C</li><li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li><li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Flammability Class: UL 94 (IEC 61010)</li><li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li><li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li><li>Vibration Resistance: 15 g / 5 -500 Hz</li><li>Shock Resistance: 50 g / 11ms</li><li>Mean Time To Failure (MTTF): 574 years (acc. to Telcordia SR-332, 2011 at 20°C)</li><li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li><li>Contact Bearer Material: PA</li><li>O-Ring Material: FKM</li><li>Mounting: 2-hole screw mounting with M4 x 25 / 30 screws and toothed lock washers (per DIN 125) and self-locking nuts</li><li>Fastening Torque:</li><ul class="md-block-unordered-list-item"><li>Fixing Screw (M4): 1 Nm</li><li>Ground Connection (FE) (M4): 1 Nm</li><li>Bus Connection (M12): 0.5 Nm</li><li>Power Connection (M12): 0.5 Nm</li><li>I/O Connection (M12): 0.5 Nm</li></ul><li>Included in Delivery:</li><ul class="md-block-unordered-list-item"><li>Attachable Labels: 15x</li><li>Sealing Caps: 5x M12</li></ul></ul><h3 class="md-block-header-three">Protocols</h3><h4 class="md-block-header-four">PROFINET</h4><ul class="md-block-unordered-list-item"><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: V2.3X</li><li>Conformance Class: C</li><li>Performance Class: RT (switch supports IRT)</li><li>Netload Class: II</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Update Rate: min. 1 ms</li><li>Addressing: DCP</li><li>Fast Startup (FSU): ≤ 2000 ms</li><li>Media Redundancy Protocol (MRP): MRP client</li><li>Shared Device: Supported</li><li>Topology Detection: LLDP, SNMP V1</li><li>Easy Device Replacement: Supported, based on LLDP</li><li>Network Protocols: ARP, HTTP, Ping, SNMP V1, TCP/IP</li></ul><h4 class="md-block-header-four">EtherNet/IP</h4><ul class="md-block-unordered-list-item"><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: CIP V3.1x, EIP Adaption of CIP V1.1x</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li><li>Addressing: BootP, DHCP, Rotary Address Switches</li><li>Address Switches Range: 0 to 255 dec</li><li>Connection Types: Exclusive Owner, Input Only, Listen Only</li><li>CIP Msg Connection Limit: 6</li><li>CIP I/O Connection Limit: 3</li><li>Device Level Ring (DLR): Beacon-based</li><li>Quick Connect (QC): Not supported</li><li>Supported Network Protocols: ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li></ul><h3 class="md-block-header-three">Power Supply</h3><ul class="md-block-unordered-list-item"><li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Current Consumption (typ.): 180 mA (at 24 V DC)</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (System Supply): LED green</li><li>Diagnostic Indicator: LED red</li></ul><h4 class="md-block-header-four">Sensor and Actuator Supply</h4><ul class="md-block-unordered-list-item"><li>Nominal Voltage: 24 V DC (SELV/PELV)</li><li>Range: 18 V DC to 30 V DC</li><li>Current Carrying Capacity: max. 16 A per connector</li></ul><h3 class="md-block-header-three">IO-Link Master Channels</h3><ul class="md-block-unordered-list-item"><li>Number of IO-Link Master Channels: max. 8, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>IO-Link Class A Ports: 4x, X1 to X4</li><li>IO-Link Class B Ports: 4x, X5 to X8</li><li>IO-Link Specification: V1.1.2</li><li>Cycle Time / Update Rate: min. 8 ms</li><li>Nominal Current:</li><ul class="md-block-unordered-list-item"><li>1L+ (Pin 1): max. 500 mA (via US)</li><li>2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)</li><li>C/Q (Pin 4): max. 500 mA (via US)</li></ul><li>Perm. Conductor Length to Device: ≤ 20 m</li><li>Status Indicator (IOL): LED green per channel</li><li>Diagnostic Indicator: LED red per port</li></ul><h3 class="md-block-header-three">Digital Input Channels</h3><ul class="md-block-unordered-list-item"><li>Number of Digital Input Channels: max. 12, configurable</li><li>Nominal Voltage: 24 V DC via US (module power supply)</li><li>Nominal Current: typ. 3 mA</li><li>Sensor Current Supply: max. 500 mA per port via 1L+</li><li>Input Voltage Range:</li><ul class="md-block-unordered-list-item"><li>&quot;0&quot; signal: -0.3V DC to 5 V DC</li><li>&quot;1&quot; signal: 15 V DC to 30 V DC</li></ul><li>Status Indicator: LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul><h3 class="md-block-header-three">Digital Output Channels</h3><ul class="md-block-unordered-list-item"><li>Number of Digital Output Channels: max. 12, configurable</li><li>Nominal Voltage: 24 V DC via Uaux</li><li>Output Current per Channel: max. 2 A</li><li>Output Current per Module: max. 9 A</li><li>Galvanically Isolated: Yes</li><li>Status Indicator: LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul><h3 class="md-block-header-three">Electrical Isolation</h3><ul class="md-block-unordered-list-item"><li>US (System Supply Voltage) / FE: 500 V DC</li><li>Uaux / FE: 500 V DC</li><li>Bus Connection / FE: 2000 V DC</li></ul><h3 class="md-block-header-three">EMC Conformance</h3><ul class="md-block-unordered-list-item"><li>EMC Directive: 2014/30/EU</li><li>EN 61000-4-2 (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li><li>EN 61000-4-3 (Electromagnetic Field): Criterion A; Field intensity: 10 V/m</li><li>EN 61000-4-4 (Burst): Criterion B, 2 kV</li><li>EN 61000-4-5 (Surge Voltage): Criterion B; ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)</li><li>EN 61000-4-6 (Conducted immunity): Criterion A; Test voltage 10 V</li><li>EN 55022 (Radio Interference): Class A</li></ul><h3 class="md-block-header-three">Safety &amp; Environmental Compliance</h3><ul class="md-block-unordered-list-item"><li>CE: Yes</li><li>RoHS Compliant: Yes</li><li>China RoHS Compliant: Yes</li></ul><h3 class="md-block-header-three">Approvals</h3><ul class="md-block-unordered-list-item"><li>UL: cULus Listed, UL 61010-1 (UL-File E230848)</li><li>CSA: Yes, via UL</li><li>PNO: Yes</li><li>ODVA: Yes</li><li>IO-Link: Yes</li></ul><h3 class="md-block-header-three">Additional Notes</h3><ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: Only if mounted and locked with Hirschmann / Lumberg Automation connector.</li><li>System Power Supply Connection Note: Do not connect/disconnect under voltage!</li></ul>

<h3>Lumberg Automation 934879004 0980 ESL 399-121 LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm&nbsp;</h3>
<ul>
<li>I/O Systems: Active - Standalone</li>
<li>Product Sub Family: LioN-P</li>
<li>Item Description: 0980 ESL 399-121</li>
<li>Device Type: IO-Link Master</li>
<li>Protocol: Multiprotocol, PROFINET, EtherNet/IP</li>
<li>I/O Function: 4DI, 4DO, 8IOL</li>
<li>Bus Connection: M12, 4-poles, D-coded</li>
<li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li>
<li>I/O Connection: M12, 5-poles, A-coded</li>
<li>I/O Type: Digital Input/Digital Output/IO-Link</li>
</ul>
<h3>General Data</h3>
<ul>
<li>Housing Material: Metal, Zinc Die-cast</li>
<li>Housing Plating: Nickel, matt</li>
<li>Housing Color: Grey Metallic</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Potted: Yes</li>
<li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li>
<li>Weight: 500 g</li>
<li>Ambient Temperature (Operation): -20 °C to 70 °C</li>
<li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li>
<li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Flammability Class: UL 94 (IEC 61010)</li>
<li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li>
<li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li>
<li>Vibration Resistance: 15 g / 5 -500 Hz</li>
<li>Shock Resistance: 50 g / 11ms</li>
<li>Mean Time To Failure (MTTF): 574 years (acc. to Telcordia SR-332, 2011 at 20°C)</li>
<li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li>
<li>Contact Bearer Material: PA</li>
<li>O-Ring Material: FKM</li>
<li>Mounting: 2-hole screw mounting with M4 x 25 / 30 screws and toothed lock washers (per DIN 125) and self-locking nuts</li>
<li>Fastening Torque:</li>
<ul>
<li>Fixing Screw (M4): 1 Nm</li>
<li>Ground Connection (FE) (M4): 1 Nm</li>
<li>Bus Connection (M12): 0.5 Nm</li>
<li>Power Connection (M12): 0.5 Nm</li>
<li>I/O Connection (M12): 0.5 Nm</li>
</ul>
<li>Included in Delivery:</li>
<ul>
<li>Attachable Labels: 15x</li>
<li>Sealing Caps: 5x M12</li>
</ul>
</ul>
<h3>Protocols</h3>
<h4>PROFINET</h4>
<ul>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: V2.3X</li>
<li>Conformance Class: C</li>
<li>Performance Class: RT (switch supports IRT)</li>
<li>Netload Class: II</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Update Rate: min. 1 ms</li>
<li>Addressing: DCP</li>
<li>Fast Startup (FSU): ≤ 2000 ms</li>
<li>Media Redundancy Protocol (MRP): MRP client</li>
<li>Shared Device: Supported</li>
<li>Topology Detection: LLDP, SNMP V1</li>
<li>Easy Device Replacement: Supported, based on LLDP</li>
<li>Network Protocols: ARP, HTTP, Ping, SNMP V1, TCP/IP</li>
</ul>
<h4>EtherNet/IP</h4>
<ul>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: CIP V3.1x, EIP Adaption of CIP V1.1x</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li>
<li>Addressing: BootP, DHCP, Rotary Address Switches</li>
<li>Address Switches Range: 0 to 255 dec</li>
<li>Connection Types: Exclusive Owner, Input Only, Listen Only</li>
<li>CIP Msg Connection Limit: 6</li>
<li>CIP I/O Connection Limit: 3</li>
<li>Device Level Ring (DLR): Beacon-based</li>
<li>Quick Connect (QC): Not supported</li>
<li>Supported Network Protocols: ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li>
</ul>
<h3>Power Supply</h3>
<ul>
<li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Current Consumption (typ.): 180 mA (at 24 V DC)</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (System Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
</ul>
<h4>Sensor and Actuator Supply</h4>
<ul>
<li>Nominal Voltage: 24 V DC (SELV/PELV)</li>
<li>Range: 18 V DC to 30 V DC</li>
<li>Current Carrying Capacity: max. 16 A per connector</li>
</ul>
<h3>IO-Link Master Channels</h3>
<ul>
<li>Number of IO-Link Master Channels: max. 8, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>IO-Link Class A Ports: 4x, X1 to X4</li>
<li>IO-Link Class B Ports: 4x, X5 to X8</li>
<li>IO-Link Specification: V1.1.2</li>
<li>Cycle Time / Update Rate: min. 8 ms</li>
<li>Nominal Current:</li>
<ul>
<li>1L+ (Pin 1): max. 500 mA (via US)</li>
<li>2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)</li>
<li>C/Q (Pin 4): max. 500 mA (via US)</li>
</ul>
<li>Perm. Conductor Length to Device: ≤ 20 m</li>
<li>Status Indicator (IOL): LED green per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
<h3>Digital Input Channels</h3>
<ul>
<li>Number of Digital Input Channels: max. 12, configurable</li>
<li>Nominal Voltage: 24 V DC via US (module power supply)</li>
<li>Nominal Current: typ. 3 mA</li>
<li>Sensor Current Supply: max. 500 mA per port via 1L+</li>
<li>Input Voltage Range:</li>
<ul>
<li>"0" signal: -0.3V DC to 5 V DC</li>
<li>"1" signal: 15 V DC to 30 V DC</li>
</ul>
<li>Status Indicator: LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
<h3>Digital Output Channels</h3>
<ul>
<li>Number of Digital Output Channels: max. 12, configurable</li>
<li>Nominal Voltage: 24 V DC via Uaux</li>
<li>Output Current per Channel: max. 2 A</li>
<li>Output Current per Module: max. 9 A</li>
<li>Galvanically Isolated: Yes</li>
<li>Status Indicator: LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
<h3>Electrical Isolation</h3>
<ul>
<li>US (System Supply Voltage) / FE: 500 V DC</li>
<li>Uaux / FE: 500 V DC</li>
<li>Bus Connection / FE: 2000 V DC</li>
</ul>
<h3>EMC Conformance</h3>
<ul>
<li>EMC Directive: 2014/30/EU</li>
<li>EN 61000-4-2 (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li>
<li>EN 61000-4-3 (Electromagnetic Field): Criterion A; Field intensity: 10 V/m</li>
<li>EN 61000-4-4 (Burst): Criterion B, 2 kV</li>
<li>EN 61000-4-5 (Surge Voltage): Criterion B; ±0.5 kV/±0.5 kV (symmetrical/asymmetrical)</li>
<li>EN 61000-4-6 (Conducted immunity): Criterion A; Test voltage 10 V</li>
<li>EN 55022 (Radio Interference): Class A</li>
</ul>
<h3>Safety &amp; Environmental Compliance</h3>
<ul>
<li>CE: Yes</li>
<li>RoHS Compliant: Yes</li>
<li>China RoHS Compliant: Yes</li>
</ul>
<h3>Approvals</h3>
<ul>
<li>UL: cULus Listed, UL 61010-1 (UL-File E230848)</li>
<li>CSA: Yes, via UL</li>
<li>PNO: Yes</li>
<li>ODVA: Yes</li>
<li>IO-Link: Yes</li>
</ul>
<h3>Additional Notes</h3>
<ul>
<li>Protection Degree / IP Rating Note: Only if mounted and locked with Hirschmann / Lumberg Automation connector.</li>
<li>System Power Supply Connection Note: Do not connect/disconnect under voltage!</li>
</ul>

Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

Lumberg Automation 934879004 0980 ESL 399-121 LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm

lumberg automation 934879004 0980 esl 399-121 lion-p, multiprotocol io-link master, 4di 4do 8iol (8x m12), m12 l-coded power supply, metal, 60mm catu daya berkode m12, logam, master automasi induk pautan io multiprotocol, bekalan kuasa berkod lumberg/隆堡 lion-p，多协议 主站，4di m12)，m12 编码电源，金属，60 毫米 隆堡自动化

lumberg-automation-934879004-0980-esl-399-121-lion-p-multiprotocol-io-link-master-4di-4do-8iol-8x-m12-m12-l-coded-power-supply-metal-60-mm

Lumberg Automation 935021004 0980 ESL 399-121-S2 LioN-P, Multiprotocol IO-Link Master, S2-Redundancy, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm 

Product Family: I/O Systems: Active - Standalone

I/O Type: Digital Input/ Digital Output/IO-Link

Mean Time To Failure (MTTF): 582 years. acc. to Telcordia SR-332 (2011) 20°C

Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.

Fastening Torque (Fixing Screw): M4: 1 Nm

Fastening Torque (Ground Connection (FE)): M4: 1 Nm

Fastening Torque (Bus Connection): M12: 0.5 Nm

Fastening Torque (Power Connection): M12: 0.5 Nm

Fastening Torque (I/O Connection): M12: 0.5 Nm

Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12

Fast Startup (FSU): Supported, ≤ 2000 ms

Media Redundancy Protocol (MRP): Supported, MRP client

Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP

Device Level Ring (DLR): Supported, beacon based

Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP

Connection Module Supply Voltage: M12 Power, 5-poles, L-coded

Current Carrying Capacity of Connector: max. 16 A

Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded

Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Sensor Supply Voltage (Range): 18 V DC to 30 V DC

Status Indicator (Sensor Supply): LED green

Connection Actuator Supply Voltage: via Module Supply Connection

Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Actuator Supply Voltage (Range): 18 V DC to 30 V DC

Status Indicator (Actuator Supply): LED green

<h3 class="md-block-header-three">Lumberg Automation 935021004 0980 ESL 399-121-S2 LioN-P, Multiprotocol IO-Link Master, S2-Redundancy, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm </h3><ul class="md-block-unordered-list-item"><li>Product Family: I/O Systems: Active - Standalone</li><li>Product Sub Family: LioN-P</li><li>Item Description: 0980 ESL 399-121-S2</li><li>Device Type: IO-Link Master</li><li>Protocol: Multiprotocol, PROFINET, EtherNet/IP</li><li>I/O Function: 4DI 4DO 8IOL</li><li>Bus Connection: M12, 4-poles, D-coded</li><li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li><li>I/O Connection: M12, 5-poles, A-coded</li><li>I/O Type: Digital Input/ Digital Output/IO-Link</li></ul>General Data<ul class="md-block-unordered-list-item"><li>Housing Material: Metal, Zinc Die-cast</li><li>Housing Plating: Nickel, matt</li><li>Housing Color: Grey Metallic</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Potted: Yes</li><li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li><li>Weight: 500 g</li><li>Ambient Temperature (Operation): -20 °C to 70 °C</li><li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li><li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Flammabilty Class: UL 94 (IEC 61010)</li><li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li><li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li><li>Vibration Resistance: 15 g / 5 -500 Hz</li><li>Shock Resistance: 50 g / 11ms</li><li>Mean Time To Failure (MTTF): 582 years. acc. to Telcordia SR-332 (2011) 20°C</li><li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li><li>Contact Bearer Material: PA</li><li>O-Ring Material: FKM</li><li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li><li>Fastening Torque (Fixing Screw): M4: 1 Nm</li><li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li><li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li><li>Fastening Torque (Power Connection): M12: 0.5 Nm</li><li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li><li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li></ul>PROFINET<ul class="md-block-unordered-list-item"><li>Protocol: PROFINET</li><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: V2.35</li><li>Conformance Class: C</li><li>Performance Class: RT (switch supports IRT)</li><li>Netload Class: II</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Update Rate: min. 1 ms</li><li>Addressing: DCP</li><li>Fast Startup (FSU): Supported, ≤ 2000 ms</li><li>Media Redundancy Protocol (MRP): Supported, MRP client</li><li>Shared Device: Supported</li><li>Topology Detection: LLDP, SNMP V1</li><li>Easy Device Replacement: Supported, based on LLDP</li><li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li></ul>EtherNet/IP<ul class="md-block-unordered-list-item"><li>Protocol (EtherNet/IP): EtherNet/IP</li><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: CIP V3.1x, EIP Adaption of CIP V1.1x</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li><li>Addressing: BootP, DHCP, Rotary Address Switches</li><li>Address Switches Range: 0 to 255 dec</li><li>Connection Types: Exclusive Owner, Input Only, Listen Only</li><li>CIP Msg Connection Limit: 6</li><li>CIP I/O Connection Limit: 3</li><li>Device Level Ring (DLR): Supported, beacon based</li><li>Quick Connect (QC): Not supported</li><li>Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li></ul>Power Supply<ul class="md-block-unordered-list-item"><li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Number of Connections: 2</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Current Consumption (typ.): 180 mA (at 24 V DC)</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (System Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Sensor Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Actuator Supply Voltage: via Module Supply Connection</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Actuator Supply): LED green</li><li>Diagnostic Indicator: LED red</li></ul>IO-Link Master Channels<ul class="md-block-unordered-list-item"><li>Number of IO-Link Master Channels: max. 8, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>IO-Link Class A Ports: 4x, X1 to X4</li><li>IO-Link Class B Ports: 4x, X5 to X8</li><li>IO-Link Specification: V1.1.2</li><li>Parameter Storage: Supported</li><li>Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)</li><li>Cycle Time / Update Rate: min. 8 ms for all channels at 32 Byte IN / OUT</li><li>Nominal Current 1L+ (Pin 1): max. 500 mA (via US)</li><li>Nominal Voltage: 24 V DC via US (system power supply)</li><li>Nominal Current 2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)</li><li>Nominal Current C/Q (Pin 4): max. 500 mA (via US)</li><li>Perm. Conductor Length to Device: ≤ 20 m</li><li>Status Indicator (IOL): LED green per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Digital Input Channels<ul class="md-block-unordered-list-item"><li>Number of Digital Input Channels: max. 12, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: Type 1 acc. to IEC 61131-2</li><li>Input Wiring: 2-, 3-wire</li><li>Nominal Voltage: 24 V DC via US (module power supply)</li><li>Nominal Current: typ. 3 mA</li><li>Sensor Current Supply: max. 500 mA per port via 1L+</li><li>Sensor Type: PNP</li><li>Input Voltage Range &quot;0&quot; signal: -0,3V DC ... 5 V DC</li><li>Input Voltage Range &quot;1&quot; signal: 15 V DC ... 30 V DC</li><li>Protective Circuit: Electronicaly: Overload protection, short-circuit protection</li><li>Status Indicator (Inputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Digital Output Channels<ul class="md-block-unordered-list-item"><li>Number of Digital Output Channels: max. 12, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: p-switching</li><li>Output Wiring: 2-wire</li><li>Nominal Voltage: Pin 4: 24 V DC via US (system power supply) / Pin 2: 24 V DC via Uaux (auxiliary power supply)</li><li>Output Current per Channel: max. 2 A (Pin 2) / max. 0.5 A (Pin 4)</li><li>Output Current per Module: max. 9 A</li><li>Galvanically Isolated: Pin 4: No / Pin 2: Yes</li><li>Protective Circuit: Electronicaly: Overload protection, short-circuit protection</li><li>Overload Behavior: Auto off and on switching / Manual restart</li><li>Status Indicator (Outputs): LED white or yellow per channel</li><li>Diagnostic Idicator: LED red per port</li></ul>Electrical Isolation<ul class="md-block-unordered-list-item"><li>US (System Supply Voltage) / FE: 500 V DC</li><li>Uaux / FE: 500 V DC</li><li>Bus connection / FE: 2000 V DC</li></ul>EMC Conformance<ul class="md-block-unordered-list-item"><li>EMC Directive: 2014/30/EU</li><li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li><li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li><li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li><li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li><li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li><li>EN 55022 Radio Interference Properties: Class A</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>CE: Yes</li><li>RoHS Compliant: Yes</li><li>China RoHS-Compliant: Yes</li></ul>Approvals<ul class="md-block-unordered-list-item"><li>UL: cULus Listed, UL 61010-1</li><li>UL-File: E230848</li><li>CSA: Yes, via UL</li><li>PNO: Yes</li><li>ODVA: No</li><li>IO-Link: Yes</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: *only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li><li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li></ul>

<h3>Lumberg Automation 935021004 0980 ESL 399-121-S2 LioN-P, Multiprotocol IO-Link Master, S2-Redundancy, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm&nbsp;</h3>
<ul>
<li>Product Family: I/O Systems: Active - Standalone</li>
<li>Product Sub Family: LioN-P</li>
<li>Item Description: 0980 ESL 399-121-S2</li>
<li>Device Type: IO-Link Master</li>
<li>Protocol: Multiprotocol, PROFINET, EtherNet/IP</li>
<li>I/O Function: 4DI 4DO 8IOL</li>
<li>Bus Connection: M12, 4-poles, D-coded</li>
<li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li>
<li>I/O Connection: M12, 5-poles, A-coded</li>
<li>I/O Type: Digital Input/ Digital Output/IO-Link</li>
</ul>
General Data
<ul>
<li>Housing Material: Metal, Zinc Die-cast</li>
<li>Housing Plating: Nickel, matt</li>
<li>Housing Color: Grey Metallic</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Potted: Yes</li>
<li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li>
<li>Weight: 500 g</li>
<li>Ambient Temperature (Operation): -20 °C to 70 °C</li>
<li>Ambient Temperature (Storage/Transport): -25 °C to 85 °C</li>
<li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Flammabilty Class: UL 94 (IEC 61010)</li>
<li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li>
<li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li>
<li>Vibration Resistance: 15 g / 5 -500 Hz</li>
<li>Shock Resistance: 50 g / 11ms</li>
<li>Mean Time To Failure (MTTF): 582 years. acc. to Telcordia SR-332 (2011) 20°C</li>
<li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li>
<li>Contact Bearer Material: PA</li>
<li>O-Ring Material: FKM</li>
<li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li>
<li>Fastening Torque (Fixing Screw): M4: 1 Nm</li>
<li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li>
<li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (Power Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li>
<li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li>
</ul>
PROFINET
<ul>
<li>Protocol: PROFINET</li>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: V2.35</li>
<li>Conformance Class: C</li>
<li>Performance Class: RT (switch supports IRT)</li>
<li>Netload Class: II</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Update Rate: min. 1 ms</li>
<li>Addressing: DCP</li>
<li>Fast Startup (FSU): Supported, ≤ 2000 ms</li>
<li>Media Redundancy Protocol (MRP): Supported, MRP client</li>
<li>Shared Device: Supported</li>
<li>Topology Detection: LLDP, SNMP V1</li>
<li>Easy Device Replacement: Supported, based on LLDP</li>
<li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li>
</ul>
EtherNet/IP
<ul>
<li>Protocol (EtherNet/IP): EtherNet/IP</li>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: CIP V3.1x, EIP Adaption of CIP V1.1x</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li>
<li>Addressing: BootP, DHCP, Rotary Address Switches</li>
<li>Address Switches Range: 0 to 255 dec</li>
<li>Connection Types: Exclusive Owner, Input Only, Listen Only</li>
<li>CIP Msg Connection Limit: 6</li>
<li>CIP I/O Connection Limit: 3</li>
<li>Device Level Ring (DLR): Supported, beacon based</li>
<li>Quick Connect (QC): Not supported</li>
<li>Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li>
</ul>
Power Supply
<ul>
<li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Number of Connections: 2</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Current Consumption (typ.): 180 mA (at 24 V DC)</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (System Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Sensor Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Actuator Supply Voltage: via Module Supply Connection</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Actuator Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
</ul>
IO-Link Master Channels
<ul>
<li>Number of IO-Link Master Channels: max. 8, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>IO-Link Class A Ports: 4x, X1 to X4</li>
<li>IO-Link Class B Ports: 4x, X5 to X8</li>
<li>IO-Link Specification: V1.1.2</li>
<li>Parameter Storage: Supported</li>
<li>Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)</li>
<li>Cycle Time / Update Rate: min. 8 ms for all channels at 32 Byte IN / OUT</li>
<li>Nominal Current 1L+ (Pin 1): max. 500 mA (via US)</li>
<li>Nominal Voltage: 24 V DC via US (system power supply)</li>
<li>Nominal Current 2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)</li>
<li>Nominal Current C/Q (Pin 4): max. 500 mA (via US)</li>
<li>Perm. Conductor Length to Device: ≤ 20 m</li>
<li>Status Indicator (IOL): LED green per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Digital Input Channels
<ul>
<li>Number of Digital Input Channels: max. 12, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: Type 1 acc. to IEC 61131-2</li>
<li>Input Wiring: 2-, 3-wire</li>
<li>Nominal Voltage: 24 V DC via US (module power supply)</li>
<li>Nominal Current: typ. 3 mA</li>
<li>Sensor Current Supply: max. 500 mA per port via 1L+</li>
<li>Sensor Type: PNP</li>
<li>Input Voltage Range "0" signal: -0,3V DC ... 5 V DC</li>
<li>Input Voltage Range "1" signal: 15 V DC ... 30 V DC</li>
<li>Protective Circuit: Electronicaly: Overload protection, short-circuit protection</li>
<li>Status Indicator (Inputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Digital Output Channels
<ul>
<li>Number of Digital Output Channels: max. 12, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: p-switching</li>
<li>Output Wiring: 2-wire</li>
<li>Nominal Voltage: Pin 4: 24 V DC via US (system power supply) / Pin 2: 24 V DC via Uaux (auxiliary power supply)</li>
<li>Output Current per Channel: max. 2 A (Pin 2) / max. 0.5 A (Pin 4)</li>
<li>Output Current per Module: max. 9 A</li>
<li>Galvanically Isolated: Pin 4: No / Pin 2: Yes</li>
<li>Protective Circuit: Electronicaly: Overload protection, short-circuit protection</li>
<li>Overload Behavior: Auto off and on switching / Manual restart</li>
<li>Status Indicator (Outputs): LED white or yellow per channel</li>
<li>Diagnostic Idicator: LED red per port</li>
</ul>
Electrical Isolation
<ul>
<li>US (System Supply Voltage) / FE: 500 V DC</li>
<li>Uaux / FE: 500 V DC</li>
<li>Bus connection / FE: 2000 V DC</li>
</ul>
EMC Conformance
<ul>
<li>EMC Directive: 2014/30/EU</li>
<li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li>
<li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li>
<li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li>
<li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li>
<li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li>
<li>EN 55022 Radio Interference Properties: Class A</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>CE: Yes</li>
<li>RoHS Compliant: Yes</li>
<li>China RoHS-Compliant: Yes</li>
</ul>
Approvals
<ul>
<li>UL: cULus Listed, UL 61010-1</li>
<li>UL-File: E230848</li>
<li>CSA: Yes, via UL</li>
<li>PNO: Yes</li>
<li>ODVA: No</li>
<li>IO-Link: Yes</li>
</ul>
Notes
<ul>
<li>Protection Degree / IP Rating Note: *only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
<li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li>
</ul>

Lumberg Automation 935021004 0980 ESL 399-121-S2 LioN-P, Multiprotocol IO-Link Master, S2-Redundancy, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm

lumberg automation 935021004 0980 esl 399-121-s2 lion-p, multiprotocol io-link master, s2-redundancy, 4di 4do 8iol (8x m12), m12 l-coded power supply, metal, 60mm catu daya berkode m12, logam, master automasi lionn-p, induk pautan io berbilang protokol, lewah s2, bekalan kuasa berkod lumberg/隆堡 lion-p，多协议 主站，s2 冗余，4di m12)，m12 编码电源，金属，60 毫米 隆堡自动化

lumberg-automation-935021004-0980-esl-399-121-s2-lion-p-multiprotocol-io-link-master-s2-redundancy-4di-4do-8iol-8x-m12-m12-l-coded-power-supply-metal-60-mm

Lumberg Automation 934879072 0980 ESL 399-121-EEC LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm, Eec 

Ambient Temperature (Operation): -40 °C to 70 °C

Ambient Temperature (Storage/Transport): -40 °C to 85 °C

Mean Time To Failure (MTTF): 574 years. acc. to Telcordia SR-332 (2011) 20°C

<h3 class="md-block-header-three">Lumberg Automation 934879072 0980 ESL 399-121-EEC LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm, Eec </h3><ul class="md-block-unordered-list-item"><li>Product Family: I/O Systems: Active - Standalone</li><li>Product Sub Family: LioN-P</li><li>Item Description: 0980 ESL 399-121-EEC</li><li>Device Type: IO-Link Master</li><li>Protocol: Multiprotocol, PROFINET, EtherNet/IP</li><li>I/O Function: 4DI 4DO 8IOL</li><li>Bus Connection: M12, 4-poles, D-coded</li><li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li><li>I/O Connection: M12, 5-poles, A-coded</li><li>I/O Type: Digital Input/ Digital Output/IO-Link</li></ul>General Data<ul class="md-block-unordered-list-item"><li>Housing Material: Metal, Zinc Die-cast</li><li>Housing Plating: Nickel, matt</li><li>Housing Color: Grey Metallic</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Potted: Yes</li><li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li><li>Weight: 500 g</li><li>Ambient Temperature (Operation): -40 °C to 70 °C</li><li>Ambient Temperature (Storage/Transport): -40 °C to 85 °C</li><li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Flammability Class: UL 94 (IEC 61010)</li><li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li><li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li><li>Vibration Resistance: 15 g / 5 -500 Hz</li><li>Shock Resistance: 50 g / 11ms</li><li>Mean Time To Failure (MTTF): 574 years. acc. to Telcordia SR-332 (2011) 20°C</li><li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li><li>Contact Bearer Material: PA</li><li>O-Ring Material: FKM</li><li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li><li>Fastening Torque (Fixing Screw): M4: 1 Nm</li><li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li><li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li><li>Fastening Torque (Power Connection): M12: 0.5 Nm</li><li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li><li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li></ul>PROFINET<ul class="md-block-unordered-list-item"><li>Protocol: PROFINET</li><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: V2.3X</li><li>Conformance Class: C</li><li>Performance Class: RT (switch supports IRT)</li><li>Netload Class: II</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Update Rate: min. 1 ms</li><li>Addressing: DCP</li><li>Fast Startup (FSU): Supported, ≤ 2000 ms</li><li>Media Redundancy Protocol (MRP): Supported, MRP client</li><li>Shared Device: Supported</li><li>Topology Detection: LLDP, SNMP V1</li><li>Easy Device Replacement: Supported, based on LLDP</li><li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li></ul>EtherNet/IP<ul class="md-block-unordered-list-item"><li>Protocol (EtherNet/IP): EtherNet/IP</li><li>Connection: M12 LAN, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: CIP V3.1x, EIP Adaption of CIP V1.1x</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li><li>Addressing: BootP, DHCP, Rotary Address Switches</li><li>Address Switches Range: 0 to 255 dec</li><li>Connection Types: Exclusive Owner, Input Only, Listen Only</li><li>CIP Msg Connection Limit: 6</li><li>CIP I/O Connection Limit: 3</li><li>Device Level Ring (DLR): Supported, beacon based</li><li>Quick Connect (QC): Not supported</li><li>Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li></ul>Power Supply<ul class="md-block-unordered-list-item"><li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Number of Connections: 2</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Current Consumption (typ.): 180 mA (at 24 V DC)</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (System Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Sensor Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Actuator Supply Voltage: via Module Supply Connection</li><li>Current Carrying Capacity of Connector: max. 16 A</li><li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Actuator Supply): LED green</li><li>Diagnostic Indicator: LED red</li></ul>IO-Link Master Channels<ul class="md-block-unordered-list-item"><li>Number of IO-Link Master Channels: max. 8, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>IO-Link Class A Ports: 4x, X1 to X4</li><li>IO-Link Class B Ports: 4x, X5 to X8</li><li>IO-Link Specification: V1.1.2</li><li>Parameter Storage: Supported</li><li>Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)</li><li>Cycle Time / Update Rate: min. 8 ms for all channels at 32 Byte IN / OUT</li><li>Nominal Current 1L+ (Pin 1): max. 500 mA (via US)</li><li>Nominal Voltage: 24 V DC via US (system power supply)</li><li>Nominal Current 2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)</li><li>Nominal Current C/Q (Pin 4): max. 500 mA (via US)</li><li>Perm. Conductor Length to Device: ≤ 20 m</li><li>Status Indicator (IOL): LED green per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Digital Input Channels<ul class="md-block-unordered-list-item"><li>Number of Digital Input Channels: max. 12, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: Type 1 acc. to IEC 61131-2</li><li>Input Wiring: 2-, 3-wire</li><li>Nominal Voltage: 24 V DC via US (module power supply)</li><li>Nominal Current: typ. 3 mA</li><li>Sensor Current Supply: max. 500 mA per port via 1L+</li><li>Sensor Type: PNP</li><li>Input Voltage Range &quot;0&quot; signal: -0,3V DC ... 5 V DC</li><li>Input Voltage Range &quot;1&quot; signal: 15 V DC ... 30 V DC</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Status Indicator (Inputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Digital Output Channels<ul class="md-block-unordered-list-item"><li>Number of Digital Output Channels: max. 12, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: p-switching</li><li>Output Wiring: 2-wire</li><li>Nominal Voltage: Pin 4: 24 V DC via US (system power supply) / Pin 2: 24 V DC via Uaux (auxiliary power supply)</li><li>Output Current per Channel: max. 2 A (Pin 2) / max. 0.5 A (Pin 4)</li><li>Output Current per Module: max. 9 A</li><li>Galvanically Isolated: Pin 4: No / Pin 2: Yes</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Overload Behavior: Auto off and on switching / Manual restart</li><li>Status Indicator (Outputs): LED white or yellow per channel</li><li>Diagnostic Indicator: LED red per port</li></ul>Electrical Isolation<ul class="md-block-unordered-list-item"><li>US (System Supply Voltage) / FE: 500 V DC</li><li>Uaux / FE: 500 V DC</li><li>Bus connection / FE: 2000 V DC</li></ul>EMC Conformance<ul class="md-block-unordered-list-item"><li>EMC Directive: 2014/30/EU</li><li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li><li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li><li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li><li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li><li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li><li>EN 55022 Radio Interference Properties: Class A</li></ul>Safety &amp; Environmental Compliance<ul class="md-block-unordered-list-item"><li>CE: Yes</li><li>RoHS Compliant: Yes</li><li>China RoHS-Compliant: Yes</li></ul>Approvals<ul class="md-block-unordered-list-item"><li>UL: cULus Listed, UL 61010-1</li><li>UL-File: E230848</li><li>CSA: Yes, via UL</li><li>PNO: Yes</li><li>ODVA: Yes</li><li>IO-Link: Yes</li></ul>Notes<ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li><li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li></ul>

<h3>Lumberg Automation 934879072 0980 ESL 399-121-EEC LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm, Eec&nbsp;</h3>
<ul>
<li>Product Family: I/O Systems: Active - Standalone</li>
<li>Product Sub Family: LioN-P</li>
<li>Item Description: 0980 ESL 399-121-EEC</li>
<li>Device Type: IO-Link Master</li>
<li>Protocol: Multiprotocol, PROFINET, EtherNet/IP</li>
<li>I/O Function: 4DI 4DO 8IOL</li>
<li>Bus Connection: M12, 4-poles, D-coded</li>
<li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li>
<li>I/O Connection: M12, 5-poles, A-coded</li>
<li>I/O Type: Digital Input/ Digital Output/IO-Link</li>
</ul>
General Data
<ul>
<li>Housing Material: Metal, Zinc Die-cast</li>
<li>Housing Plating: Nickel, matt</li>
<li>Housing Color: Grey Metallic</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Potted: Yes</li>
<li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li>
<li>Weight: 500 g</li>
<li>Ambient Temperature (Operation): -40 °C to 70 °C</li>
<li>Ambient Temperature (Storage/Transport): -40 °C to 85 °C</li>
<li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Flammability Class: UL 94 (IEC 61010)</li>
<li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li>
<li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li>
<li>Vibration Resistance: 15 g / 5 -500 Hz</li>
<li>Shock Resistance: 50 g / 11ms</li>
<li>Mean Time To Failure (MTTF): 574 years. acc. to Telcordia SR-332 (2011) 20°C</li>
<li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li>
<li>Contact Bearer Material: PA</li>
<li>O-Ring Material: FKM</li>
<li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li>
<li>Fastening Torque (Fixing Screw): M4: 1 Nm</li>
<li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li>
<li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (Power Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li>
<li>Included in Delivery: Attachable Labels: 15x, Sealing Caps: 5x M12</li>
</ul>
PROFINET
<ul>
<li>Protocol: PROFINET</li>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: V2.3X</li>
<li>Conformance Class: C</li>
<li>Performance Class: RT (switch supports IRT)</li>
<li>Netload Class: II</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Update Rate: min. 1 ms</li>
<li>Addressing: DCP</li>
<li>Fast Startup (FSU): Supported, ≤ 2000 ms</li>
<li>Media Redundancy Protocol (MRP): Supported, MRP client</li>
<li>Shared Device: Supported</li>
<li>Topology Detection: LLDP, SNMP V1</li>
<li>Easy Device Replacement: Supported, based on LLDP</li>
<li>Supported Network Protocols (Other): ARP, HTTP, Ping, SNMP V1, TCP/IP</li>
</ul>
EtherNet/IP
<ul>
<li>Protocol (EtherNet/IP): EtherNet/IP</li>
<li>Connection: M12 LAN, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: CIP V3.1x, EIP Adaption of CIP V1.1x</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li>
<li>Addressing: BootP, DHCP, Rotary Address Switches</li>
<li>Address Switches Range: 0 to 255 dec</li>
<li>Connection Types: Exclusive Owner, Input Only, Listen Only</li>
<li>CIP Msg Connection Limit: 6</li>
<li>CIP I/O Connection Limit: 3</li>
<li>Device Level Ring (DLR): Supported, beacon based</li>
<li>Quick Connect (QC): Not supported</li>
<li>Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li>
</ul>
Power Supply
<ul>
<li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Number of Connections: 2</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Module Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Current Consumption (typ.): 180 mA (at 24 V DC)</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (System Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Sensor Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Sensor Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Actuator Supply Voltage: via Module Supply Connection</li>
<li>Current Carrying Capacity of Connector: max. 16 A</li>
<li>Actuator Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Actuator Supply Voltage (Range): 18 V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Actuator Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
</ul>
IO-Link Master Channels
<ul>
<li>Number of IO-Link Master Channels: max. 8, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>IO-Link Class A Ports: 4x, X1 to X4</li>
<li>IO-Link Class B Ports: 4x, X5 to X8</li>
<li>IO-Link Specification: V1.1.2</li>
<li>Parameter Storage: Supported</li>
<li>Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)</li>
<li>Cycle Time / Update Rate: min. 8 ms for all channels at 32 Byte IN / OUT</li>
<li>Nominal Current 1L+ (Pin 1): max. 500 mA (via US)</li>
<li>Nominal Voltage: 24 V DC via US (system power supply)</li>
<li>Nominal Current 2L+/Uaux (Pin 2, B Ports): max. 2 A per port (via Uaux)</li>
<li>Nominal Current C/Q (Pin 4): max. 500 mA (via US)</li>
<li>Perm. Conductor Length to Device: ≤ 20 m</li>
<li>Status Indicator (IOL): LED green per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Digital Input Channels
<ul>
<li>Number of Digital Input Channels: max. 12, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: Type 1 acc. to IEC 61131-2</li>
<li>Input Wiring: 2-, 3-wire</li>
<li>Nominal Voltage: 24 V DC via US (module power supply)</li>
<li>Nominal Current: typ. 3 mA</li>
<li>Sensor Current Supply: max. 500 mA per port via 1L+</li>
<li>Sensor Type: PNP</li>
<li>Input Voltage Range "0" signal: -0,3V DC ... 5 V DC</li>
<li>Input Voltage Range "1" signal: 15 V DC ... 30 V DC</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Status Indicator (Inputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Digital Output Channels
<ul>
<li>Number of Digital Output Channels: max. 12, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: p-switching</li>
<li>Output Wiring: 2-wire</li>
<li>Nominal Voltage: Pin 4: 24 V DC via US (system power supply) / Pin 2: 24 V DC via Uaux (auxiliary power supply)</li>
<li>Output Current per Channel: max. 2 A (Pin 2) / max. 0.5 A (Pin 4)</li>
<li>Output Current per Module: max. 9 A</li>
<li>Galvanically Isolated: Pin 4: No / Pin 2: Yes</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Overload Behavior: Auto off and on switching / Manual restart</li>
<li>Status Indicator (Outputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator: LED red per port</li>
</ul>
Electrical Isolation
<ul>
<li>US (System Supply Voltage) / FE: 500 V DC</li>
<li>Uaux / FE: 500 V DC</li>
<li>Bus connection / FE: 2000 V DC</li>
</ul>
EMC Conformance
<ul>
<li>EMC Directive: 2014/30/EU</li>
<li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li>
<li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li>
<li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li>
<li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li>
<li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li>
<li>EN 55022 Radio Interference Properties: Class A</li>
</ul>
Safety &amp; Environmental Compliance
<ul>
<li>CE: Yes</li>
<li>RoHS Compliant: Yes</li>
<li>China RoHS-Compliant: Yes</li>
</ul>
Approvals
<ul>
<li>UL: cULus Listed, UL 61010-1</li>
<li>UL-File: E230848</li>
<li>CSA: Yes, via UL</li>
<li>PNO: Yes</li>
<li>ODVA: Yes</li>
<li>IO-Link: Yes</li>
</ul>
Notes
<ul>
<li>Protection Degree / IP Rating Note: ** only if mounted and locked in combination with Hirschmann / Lumberg Automation connector.</li>
<li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li>
</ul>

Lumberg Automation 934879072 0980 ESL 399-121-EEC LioN-P, Multiprotocol IO-Link Master, 4DI 4DO 8IOL (8x M12), M12 L-coded Power Supply, Metal, 60 Mm, Eec

lumberg automation 934879072 0980 esl 399-121-eec lion-p, multiprotocol io-link master, 4di 4do 8iol (8x m12), m12 l-coded power supply, metal, 60 mm, eec catu daya berkode m12, logam, master automasi induk pautan io berbilang protokol, bekalan kuasa berkod lumberg/隆堡 lion-p，多协议 主站，4di m12)，m12 编码电源，金属，60 mm，eec 隆堡自动化

lumberg-automation-934879072-0980-esl-399-121-eec-lion-p-multiprotocol-io-link-master-4di-4do-8iol-8x-m12-m12-l-coded-power-supply-metal-60-mm-eec

Lumberg Automation 11619 RSF 3 M12 Standard Sensor/Actuator Receptacle Connector: Male, Front Mount, M12 - Mating Side, Solder Contacts - Connecting Side, 3-pin, A-coded, Unshielded, Metallic Grey Housing, 230 V AC/DC, 4 A 

Flammability Class (Contact Bearer): UL 94 V-0

Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight

Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg connectors. Tightness on the installation side must be assured by taking proper measures.

Note: The receptacle connector is intended for usage in IP67-products. To achieve this protection class, the estimated location must be designed accordingly. Further details can be found in IEC 61076-2-101. Connection area must be epoxy potted.

<h3 class="md-block-header-three">Lumberg Automation 11619 RSF 3 M12 Standard Sensor/Actuator Receptacle Connector: Male, Front Mount, M12 - Mating Side, Solder Contacts - Connecting Side, 3-pin, A-coded, Unshielded, Metallic Grey Housing, 230 V AC/DC, 4 A </h3><h3 class="md-block-header-three">Product Family:</h3><ul class="md-block-unordered-list-item"><li>Sensor / Actuator Connectors</li></ul><h3 class="md-block-header-three">Product Sub Family:</h3><ul class="md-block-unordered-list-item"><li>M12 Standard</li></ul><h3 class="md-block-header-three">Mating Side:</h3><ul class="md-block-unordered-list-item"><li>M12</li></ul><h3 class="md-block-header-three">Connecting Side:</h3><ul class="md-block-unordered-list-item"><li>Solder Contacts</li></ul><h3 class="md-block-header-three">Connector Type:</h3><ul class="md-block-unordered-list-item"><li>Receptacle</li></ul><h3 class="md-block-header-three">Type of Contact / Gender:</h3><ul class="md-block-unordered-list-item"><li>Male</li></ul><h3 class="md-block-header-three">Connector Design:</h3><ul class="md-block-unordered-list-item"><li>Front Mount</li></ul><h3 class="md-block-header-three">Number of Pins:</h3><ul class="md-block-unordered-list-item"><li>3</li></ul><h3 class="md-block-header-three">Coding:</h3><ul class="md-block-unordered-list-item"><li>A</li></ul><h3 class="md-block-header-three">Attachment Type:</h3><ul class="md-block-unordered-list-item"><li>Screw-Locking</li></ul><h3 class="md-block-header-three">Rated Voltage:</h3><ul class="md-block-unordered-list-item"><li>250 V</li></ul><h3 class="md-block-header-three">Rated Impulse Voltage:</h3><ul class="md-block-unordered-list-item"><li>2.5 kV</li></ul><h3 class="md-block-header-three">Operating Voltage:</h3><ul class="md-block-unordered-list-item"><li>230 V AC/DC</li></ul><h3 class="md-block-header-three">Rated Current:</h3><ul class="md-block-unordered-list-item"><li>4 A</li></ul><h3 class="md-block-header-three">Contact Resistance:</h3><ul class="md-block-unordered-list-item"><li>≤ 10 mOhm</li></ul><h3 class="md-block-header-three">Insulation Resistance:</h3><ul class="md-block-unordered-list-item"><li>˃ 10^9 Ohm</li></ul><h3 class="md-block-header-three">Mating Cycles:</h3><ul class="md-block-unordered-list-item"><li>≤ 100</li></ul><h3 class="md-block-header-three">Type of Connection:</h3><ul class="md-block-unordered-list-item"><li>Solder</li></ul><h3 class="md-block-header-three">Thread Size:</h3><ul class="md-block-unordered-list-item"><li>PG9</li></ul><h3 class="md-block-header-three">Suitable Conductor Cross Section:</h3><ul class="md-block-unordered-list-item"><li>Solid wires: 0.22 mm² to 0.75 mm²</li><li>Stranded wires: 0.22 mm² to 0.5 mm²</li></ul><h3 class="md-block-header-three">Ambient Temperature (Operation):</h3><ul class="md-block-unordered-list-item"><li>-25 °C to +85 °C</li></ul><h3 class="md-block-header-three">Protection Degree / IP Rating:</h3><ul class="md-block-unordered-list-item"><li>IP65, IP67</li></ul><h3 class="md-block-header-three">Design Standard:</h3><ul class="md-block-unordered-list-item"><li>IEC 61076-2-101</li></ul><h3 class="md-block-header-three">Pollution Degree:</h3><ul class="md-block-unordered-list-item"><li>3 acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul><h3 class="md-block-header-three">Clearance / Creepage Distance:</h3><ul class="md-block-unordered-list-item"><li>DIN EN 60664-1 (2008/01); VDE 0110-1</li></ul><h3 class="md-block-header-three">Overvoltage Category:</h3><ul class="md-block-unordered-list-item"><li>II acc. to DIN EN 60664-1 (VDE 0110-1)</li></ul><h3 class="md-block-header-three">Materials:</h3><ul class="md-block-unordered-list-item"><li>Contact Base Material: CuZn</li><li>Contact Plating: Cu/Au</li><li>Contact Bearer Material: PA</li><li>Contact Bearer Color: Black</li><li>Flammability Class (Contact Bearer): UL 94 V-0</li><li>Potted: No</li><li>Housing Material: CuZn</li><li>Housing Plating: Nickel-plated</li><li>Housing Color: Silver</li><li>Attachment Material: CuZn</li><li>Attachment Plating: Nickel-plated</li><li>O-Ring Material: FKM</li></ul><h3 class="md-block-header-three">Circuitry:</h3><ul class="md-block-unordered-list-item"><li>Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight</li></ul><h3 class="md-block-header-three">Accessories to Order Separately:</h3><ul class="md-block-unordered-list-item"><li>000-011-645: Mounting Nut PG9</li></ul><h3 class="md-block-header-three">Safety &amp; Environmental Compliance:</h3><ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li></ul><h3 class="md-block-header-three">Notes:</h3><ul class="md-block-unordered-list-item"><li>Note Derating: Notice derating.</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg connectors. Tightness on the installation side must be assured by taking proper measures.</li><li>Note: The receptacle connector is intended for usage in IP67-products. To achieve this protection class, the estimated location must be designed accordingly. Further details can be found in IEC 61076-2-101. Connection area must be epoxy potted.</li></ul><h3 class="md-block-header-three">Part Numbers:</h3><ul class="md-block-unordered-list-item"><li>Item #11619: RSF 3</li></ul>

<h3>Lumberg Automation 11619 RSF 3 M12 Standard Sensor/Actuator Receptacle Connector: Male, Front Mount, M12 - Mating Side, Solder Contacts - Connecting Side, 3-pin, A-coded, Unshielded, Metallic Grey Housing, 230 V AC/DC, 4 A&nbsp;</h3>
<h3>Product Family:</h3>
<ul>
<li>Sensor / Actuator Connectors</li>
</ul>
<h3>Product Sub Family:</h3>
<ul>
<li>M12 Standard</li>
</ul>
<h3>Mating Side:</h3>
<ul>
<li>M12</li>
</ul>
<h3>Connecting Side:</h3>
<ul>
<li>Solder Contacts</li>
</ul>
<h3>Connector Type:</h3>
<ul>
<li>Receptacle</li>
</ul>
<h3>Type of Contact / Gender:</h3>
<ul>
<li>Male</li>
</ul>
<h3>Connector Design:</h3>
<ul>
<li>Front Mount</li>
</ul>
<h3>Number of Pins:</h3>
<ul>
<li>3</li>
</ul>
<h3>Coding:</h3>
<ul>
<li>A</li>
</ul>
<h3>Attachment Type:</h3>
<ul>
<li>Screw-Locking</li>
</ul>
<h3>Rated Voltage:</h3>
<ul>
<li>250 V</li>
</ul>
<h3>Rated Impulse Voltage:</h3>
<ul>
<li>2.5 kV</li>
</ul>
<h3>Operating Voltage:</h3>
<ul>
<li>230 V AC/DC</li>
</ul>
<h3>Rated Current:</h3>
<ul>
<li>4 A</li>
</ul>
<h3>Contact Resistance:</h3>
<ul>
<li>≤ 10 mOhm</li>
</ul>
<h3>Insulation Resistance:</h3>
<ul>
<li>˃ 10^9 Ohm</li>
</ul>
<h3>Mating Cycles:</h3>
<ul>
<li>≤ 100</li>
</ul>
<h3>Type of Connection:</h3>
<ul>
<li>Solder</li>
</ul>
<h3>Thread Size:</h3>
<ul>
<li>PG9</li>
</ul>
<h3>Suitable Conductor Cross Section:</h3>
<ul>
<li>Solid wires: 0.22 mm² to 0.75 mm²</li>
<li>Stranded wires: 0.22 mm² to 0.5 mm²</li>
</ul>
<h3>Ambient Temperature (Operation):</h3>
<ul>
<li>-25 °C to +85 °C</li>
</ul>
<h3>Protection Degree / IP Rating:</h3>
<ul>
<li>IP65, IP67</li>
</ul>
<h3>Design Standard:</h3>
<ul>
<li>IEC 61076-2-101</li>
</ul>
<h3>Pollution Degree:</h3>
<ul>
<li>3 acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
<h3>Clearance / Creepage Distance:</h3>
<ul>
<li>DIN EN 60664-1 (2008/01); VDE 0110-1</li>
</ul>
<h3>Overvoltage Category:</h3>
<ul>
<li>II acc. to DIN EN 60664-1 (VDE 0110-1)</li>
</ul>
<h3>Materials:</h3>
<ul>
<li>Contact Base Material: CuZn</li>
<li>Contact Plating: Cu/Au</li>
<li>Contact Bearer Material: PA</li>
<li>Contact Bearer Color: Black</li>
<li>Flammability Class (Contact Bearer): UL 94 V-0</li>
<li>Potted: No</li>
<li>Housing Material: CuZn</li>
<li>Housing Plating: Nickel-plated</li>
<li>Housing Color: Silver</li>
<li>Attachment Material: CuZn</li>
<li>Attachment Plating: Nickel-plated</li>
<li>O-Ring Material: FKM</li>
</ul>
<h3>Circuitry:</h3>
<ul>
<li>Fastening Torque (Attachment): M 12x1: (50-60) Ncm, hand-tight</li>
</ul>
<h3>Accessories to Order Separately:</h3>
<ul>
<li>000-011-645: Mounting Nut PG9</li>
</ul>
<h3>Safety &amp; Environmental Compliance:</h3>
<ul>
<li>RoHS Compliant: Yes</li>
</ul>
<h3>Notes:</h3>
<ul>
<li>Note Derating: Notice derating.</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg connectors. Tightness on the installation side must be assured by taking proper measures.</li>
<li>Note: The receptacle connector is intended for usage in IP67-products. To achieve this protection class, the estimated location must be designed accordingly. Further details can be found in IEC 61076-2-101. Connection area must be epoxy potted.</li>
</ul>
<h3>Part Numbers:</h3>
<ul>
<li>Item #11619: RSF 3</li>
</ul>

Lumberg Automation 11619 RSF 3 M12 Standard Sensor/Actuator Receptacle Connector: Male, Front Mount, M12 - Mating Side, Solder Contacts - Connecting Side, 3-pin, A-coded, Unshielded, Metallic Grey Housing, 230 V AC/DC, 4 A

lumberg automation 11619 rsf m12 standard sensor/actuator receptacle connector: male, front mount, mating side, solder contacts connecting 3-pin, a-coded, unshielded, metallic grey housing, 230 ac/dc, konektor soket sensor/aktuator standar m12: jantan, dudukan depan, sisi pasangan, kontak penghubung, berkode a, tanpa pelindung, rumah abu-abu metalik, circular connectors automasi penyambung bekas penderia/penggerak standard: lelaki, lekap pengawan, kenalan pateri bahagian penyambung, berkod tidak berlindung, perumahan kelabu automation/隆堡自动化 标准传感器/执行器插座连接器：公头，前安装，m12 配合侧，焊接触点 连接侧，3 针，a 编码，非屏蔽，金属灰色外壳，230 ac/dc，4 隆堡自动化

lumberg-automation-11619-rsf-3-m12-standard-sensor-actuator-receptacle-connector-male-front-mount-m12-mating-side-solder-contacts-connecting-side-3-pin-a-coded-unshielded-metallic-grey-housing-230-v-ac-dc-4-a