Ansell

CONDOR

RS Pro

TENACTIV

Safety

safety

Cotton Gloves

cotton-gloves

Mechanical Parts

mechanical-parts

O Ring

o-ring

Rubber Seals

rubber-seals

Safety Gloves

safety-gloves

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P63 ID 62.60 x CS 5.70Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P63&nbsp;
ID 62.60 x CS 5.70
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bngab"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bngab" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ORING JIS B2401 P63 ID 62.60 x CS 5.70 Nitrile (NBR) 70 Shore

oring jis b2401 p63 id 62.60 cs 5.70 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 5.70丁腈（nbr）70肖氏 o型圈 oem代工

oring-jis-b2401-p63-id-62-60-x-cs-5-70-nitrile-nbr-70-shore

ORING JIS B2401 P63 ID 62.60 x CS 5.70Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P63
&nbsp;ID 62.60 x CS 5.70
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 P63 ID 62.60 x CS 5.70 Nitrile (NBR) 90 Shore

oring jis b2401 p63 id 62.60 cs 5.70 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 5.70腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-p63-id-62-60-x-cs-5-70-nitrile-nbr-90-shore

RS PRO Datasheet

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Facom

Wago

Kimberly Clark

HEICO

Screw

Plugs & Connector 

Panel Mount Indicators 

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Bolts

Electrical Wire 

Fuses & Fusegear

RS Components ETH SG

Rs Pro 2555905 Nitrile O-Ring, 63mm Bore, 72mm Outer Diameter (1 Bag of 20)

rs pro 2555905 nitrile o-ring, 63mm bore, 72mm outer diameter (1 bag 20) nitril lubang 63mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，63 毫米内径，72 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2555905-nitrile-o-ring-63mm-bore-72mm-outer-diameter-1-bag-of-20

Rs Pro 2556004 Nitrile O-Ring, 63mm Bore, 70mm Outer Diameter (1 Bag of 25)

rs pro 2556004 nitrile o-ring, 63mm bore, 70mm outer diameter (1 bag 25) nitril lubang 63mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，63mm 内径，70mm 外径（1 25 个） o型圈 rs专业版

rs-pro-2556004-nitrile-o-ring-63mm-bore-70mm-outer-diameter-1-bag-of-25

Rs Pro 1964922 Nitrile Rubber O-Ring, 63mm Bore, 67mm Outer Diameter (1 Bag of 20)

rs pro 1964922 nitrile rubber o-ring, 63mm bore, 67mm outer diameter (1 bag 20) lubang 63mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，内径 63 毫米，外径 67 毫米（1 20 个） o型圈 rs专业版

rs-pro-1964922-nitrile-rubber-o-ring-63mm-bore-67mm-outer-diameter-1-bag-of-20

Rs Pro 2556003 Nitrile O-Ring, 63mm Bore, 68mm Outer Diameter (1 Bag of 25)

rs pro 2556003 nitrile o-ring, 63mm bore, 68mm outer diameter (1 bag 25) nitril lubang 63mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，63 毫米内径，68 毫米外径（1 25 个） o型圈 rs专业版

rs-pro-2556003-nitrile-o-ring-63mm-bore-68mm-outer-diameter-1-bag-of-25

Rs Pro 2555907 Nitrile O-Ring, 63mm Bore, 71mm Outer Diameter (1 Bag of 20)

rs pro 2555907 nitrile o-ring, 63mm bore, 71mm outer diameter (1 bag 20) nitril lubang 63mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，63mm 内径，71mm 外径（1 20 个） o型圈 rs专业版

rs-pro-2555907-nitrile-o-ring-63mm-bore-71mm-outer-diameter-1-bag-of-20

Rs Pro 2557040 Nitrile O-Ring, 53mm Bore, 63mm Outer Diameter (1 Bag of 20)

rs pro 2557040 nitrile o-ring, 53mm bore, 63mm outer diameter (1 bag 20) nitril lubang 53mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，53mm 内径，63mm 外径（1 20 个） o型圈 rs专业版

rs-pro-2557040-nitrile-o-ring-53mm-bore-63mm-outer-diameter-1-bag-of-20

Rs Pro 1964992 Nitrile Rubber O-Ring, 58mm Bore, 63mm Outer Diameter (1 Bag of 20)

rs pro 1964992 nitrile rubber o-ring, 58mm bore, 63mm outer diameter (1 bag 20) lubang 58mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，内径 58 毫米，外径 63 毫米（1 20 个） o型圈 rs专业版

rs-pro-1964992-nitrile-rubber-o-ring-58mm-bore-63mm-outer-diameter-1-bag-of-20

Rs Pro 1965061 Nitrile Rubber O-Ring, 57mm Bore, 63mm Outer Diameter (1 Bag of 20)

rs pro 1965061 nitrile rubber o-ring, 57mm bore, 63mm outer diameter (1 bag 20) lubang 57mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，内径 57 毫米，外径 63 毫米（1 20 个） o型圈 rs专业版

rs-pro-1965061-nitrile-rubber-o-ring-57mm-bore-63mm-outer-diameter-1-bag-of-20

Rs Pro 1965067 Nitrile Rubber O-Ring, 63mm Bore, 69mm Outer Diameter (1 Bag of 20)

rs pro 1965067 nitrile rubber o-ring, 63mm bore, 69mm outer diameter (1 bag 20) o-ring karet nitril, lubang 63mm, luar kantong isi ring cincin getah bor beg gelang 丁腈橡胶 形圈，63 毫米内径，69 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-1965067-nitrile-rubber-o-ring-63mm-bore-69mm-outer-diameter-1-bag-of-20

STANLEY

ECLIPSE TOOLS

Contitech

PEGLER YORKSHIRE

Omron

CEJN

Vent-Axia

Surface Mount Resistors

Button Switch

Aluminium Capacitors

Air Filters

Rs Pro 749698 Nitrile Rubber Seal, 45mm Id, 63mm Od, 9mm

rs pro 749698 nitrile rubber seal, 45mm id, 63mm od, 9mm segel karet nitril, id 45mm, od 63mm, seals pengedap getah 丁腈橡胶密封件，内径 45 毫米，外径 63 毫米，9 毫米 rs专业版

rs-pro-749698-nitrile-rubber-seal-45mm-id-63mm-od-9mm

Elevated comfort: AlphaTec® Solvex® 37-676 safety gloves’ cotton flocking absorbs perspiration

Enhanced grip: Their reversed lozenge finish grants them better grip, for secure handling

Specialized protection: A high-performance nitrile compound composition delivers EN 374 Type A chemical resistance

Optimized durability: AlphaTec® Solvex® 37-676 industrial gloves’ nitrile composition ensures longer wear than similarly thick neoprene or rubber equivalents, with EN level 4 and ANSI level 5 abrasion resistance

Guaranteed dexterity: Their slightly thicker 17 mil/0.43mm make-up belies their ample dexterity

Food handling compliance: Ideal in both wet and dry conditions, these AlphaTec® gloves comply with EU and FDA food handling regulations

<ul class="md-block-unordered-list-item"><li>Elevated comfort: AlphaTec® Solvex® 37-676 safety gloves’ cotton flocking absorbs perspiration</li><li>Enhanced grip: Their reversed lozenge finish grants them better grip, for secure handling</li><li>Specialized protection: A high-performance nitrile compound composition delivers EN 374 Type A chemical resistance</li><li>Optimized durability: AlphaTec® Solvex® 37-676 industrial gloves’ nitrile composition ensures longer wear than similarly thick neoprene or rubber equivalents, with EN level 4 and ANSI level 5 abrasion resistance</li><li>Guaranteed dexterity: Their slightly thicker 17 mil/0.43mm make-up belies their ample dexterity</li><li>Food handling compliance: Ideal in both wet and dry conditions, these AlphaTec® gloves comply with EU and FDA food handling regulations</li></ul>

&nbsp;
<ul>
<li>Elevated comfort: AlphaTec® Solvex® 37-676 safety gloves’ cotton flocking absorbs perspiration</li>
<li>Enhanced grip: Their reversed lozenge finish grants them better grip, for secure handling</li>
<li>Specialized protection: A high-performance nitrile compound composition delivers EN 374 Type A chemical resistance</li>
<li>Optimized durability: AlphaTec® Solvex® 37-676 industrial gloves’ nitrile composition ensures longer wear than similarly thick neoprene or rubber equivalents, with EN level 4 and ANSI level 5 abrasion resistance</li>
<li>Guaranteed dexterity: Their slightly thicker 17 mil/0.43mm make-up belies their ample dexterity</li>
<li>Food handling compliance: Ideal in both wet and dry conditions, these AlphaTec® gloves comply with EU and FDA food handling regulations</li>
</ul>

Ansell glove 37-676

Martin

ACCSAFE

SAFETY JOGGER

Howard Leight

PYROVATEX

Respiratory Protection

Safety Shoes

Fall Protection

Ear Protection

Body Protection

Safety Helmet

Safety Goggles

Safety Vest

Face Protection

Ansell Nitrile Chemical Resistant Glove 37-676

ansell nitrile chemical resistant glove 37-676 sarung tangan tahan kimia nitril safety gloves keselamatan ansell/安塞尔 丁腈耐化学品手套 安全手套 安塞尔

ansell-nitrile-chemical-resistant-glove-37-676

Size 9/L

Size

Grainger

Tenactiv S18WTLFN9 Work Gloves Nitrile L Red/Gray Pr

tenactiv s18wtlfn9 work gloves nitrile red/gray pr sarung tangan kerja nitril merah/abu-abu cotton tenaactiv merah/kelabu 工作手套丁腈 红色/灰色 腾科特

tenactiv-s18wtlfn9-work-gloves-nitrile-l-red-gray-pr

Bdg 991811010 Coated Gloves Nitrile PR1

bdg 991811010 coated gloves nitrile pr1 sarung tangan berlapis nitril cotton bersalut 丁腈涂层手套

bdg-991811010-coated-gloves-nitrile-pr1

Condor 60WF86 K3386 Coated Gloves Nylon Span Nitrile Xs Pr

condor 60wf86 k3386 coated gloves nylon span nitrile xs pr sarung tangan berlapis nilon nitril safety keselamatan bersalut 涂层手套 尼龙 腈纶 安全手套 秃鹰

condor-60wf86-k3386-coated-gloves-nylon-span-nitrile-xs-pr

Condor 824VG9 Coated Gloves Nylon Nitrile L PK12

condor 824vg9 coated gloves nylon nitrile pk12 sarung tangan berlapis nilon nitril safety keselamatan bersalut 涂层手套 尼龙丁腈 安全手套 秃鹰