Ansell

CONDOR

RS Pro

Safety

safety

Cotton Gloves

cotton-gloves

Mechanical Parts

mechanical-parts

O Ring

o-ring

Rubber Seals

rubber-seals

Safety Gloves

safety-gloves

Grainger

Condor 48UM34 Disposable Gloves Nitrile S PK100

condor 48um34 disposable gloves nitrile pk100 sarung tangan sekali pakai nitril safety keselamatan condor/秃鹰 一次性丁腈手套 安全手套 秃鹰

condor-48um34-disposable-gloves-nitrile-s-pk100

Pip 34874 Pr Coated Glove Nitrile M Blk/Gray

pip 34874 pr coated glove nitrile blk/gray nitril hitam/abu-abu cotton gloves sarung tangan bersalut blk/kelabu oem/oem代工 涂层丁腈手套 黑色/灰色 画中画

pip-34874-pr-coated-glove-nitrile-m-blk-gray

The world's leading disposable glove for chemical splash proction

Proprietary Ansell material formulation offer enhanced chemical splash protection

Soft nitrile provides high levels of comfort

Silicone free design is paint and finish process friendly

Also available in packaging to fit vending machines

The world&#x27;s leading disposable glove for chemical splash proctionProprietary Ansell material formulation offer enhanced chemical splash protectionSoft nitrile provides high levels of comfortRobust design for superior durabilitySilicone free design is paint and finish process friendlyAlso available in packaging to fit vending machines100pc/box, 10box/ctn

The world's leading disposable glove for chemical splash proction
Proprietary Ansell material formulation offer enhanced chemical splash protection
Soft nitrile provides high levels of comfort
Robust design for superior durability
Silicone free design is paint and finish process friendly
Also available in packaging to fit vending machines
100pc/box, 10box/ctn

Ansell glove 92-600

Martin

ACCSAFE

SAFETY JOGGER

Others

Howard Leight

PYROVATEX

Hornet

Respiratory Protection

Safety Shoes

Fall Protection

Ear Protection

Body Protection

Safety Helmet

Safety Goggles

Safety Vest

Workplace Safety

buyerIntroduction

Ansell 92-600 Disposable Nitrile Glove (box of 100pcs)

ansell 92-600 disposable nitrile glove (box 100pcs) (kotak isi safety gloves sarung tangan keselamatan nitril pakai ansell/安塞尔 一次性丁腈手套（每盒 100 件） 安全手套 安塞尔

ansell-92-600-disposable-nitrile-glove-box-of-100pcs

Size

RS PRO Datasheet

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

Omron

CEJN

Vent-Axia

Screw

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 2270621 Nitrile Rubber Seal, 34mm Id, 54mm Od, 12.5mm (1 Bag of 5)

rs pro 2270621 nitrile rubber seal, 34mm id, 54mm od, 12.5mm (1 bag 5) segel karet nitril, id 34mm, od 54mm, 12,5mm kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 34 毫米，外径 54 毫米，12.5 毫米（1 个） rs专业版

rs-pro-2270621-nitrile-rubber-seal-34mm-id-54mm-od-12-5mm-1-bag-of-5

Rs Pro 2295277 Nitrile Rubber Seal, 34mm Id, 48mm Od, 8mm (1 Bag of 5)

rs pro 2295277 nitrile rubber seal, 34mm id, 48mm od, 8mm (1 bag 5) segel karet nitril, id 34mm, od 48mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 34mm，外径 48mm，8mm（1 个） rs专业版

rs-pro-2295277-nitrile-rubber-seal-34mm-id-48mm-od-8mm-1-bag-of-5

Rs Pro 2270619 Nitrile Rubber Seal, 34mm Id, 50mm Od, 7mm (1 Bag of 5)

rs pro 2270619 nitrile rubber seal, 34mm id, 50mm od, 7mm (1 bag 5) segel karet nitril, id 34mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 34mm，外径 50mm，7mm（1 个） rs专业版

rs-pro-2270619-nitrile-rubber-seal-34mm-id-50mm-od-7mm-1-bag-of-5

Rs Pro 2299621 Nitrile Rubber Seal, 34mm Id, 46mm Od, 8mm (1 Bag of 5)

rs pro 2299621 nitrile rubber seal, 34mm id, 46mm od, 8mm (1 bag 5) segel karet nitril, id 34mm, od 46mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 34mm，外径 46mm，8mm（1 个） rs专业版

rs-pro-2299621-nitrile-rubber-seal-34mm-id-46mm-od-8mm-1-bag-of-5

Rs Pro 2270618 Nitrile Rubber Seal, 34mm Id, 50mm Od, 6mm (1 Bag of 5)

rs pro 2270618 nitrile rubber seal, 34mm id, 50mm od, 6mm (1 bag 5) segel karet nitril, id 34mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 34mm，外径 50mm，6mm（1 个） rs专业版

rs-pro-2270618-nitrile-rubber-seal-34mm-id-50mm-od-6mm-1-bag-of-5

RS PRO O-Rings Overview

PHOENIX CONTACT

Mag-Lite

Wago

Kimberly Clark

HEICO

Clamps

Indicator Lights

Ethernet Cable

Drill Bits & Drill Bit Sets

Fuses & Fusegear

Rs Pro 2557151 Nitrile O-Ring, 34mm Bore, 38.6mm Outer Diameter (1 Bag of 50)

rs pro 2557151 nitrile o-ring, 34mm bore, 38.6mm outer diameter (1 bag 50) nitril lubang 34mm, luar 38,6mm kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，34 毫米内径，38.6 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-2557151-nitrile-o-ring-34mm-bore-38-6mm-outer-diameter-1-bag-of-50

Rs Pro 2270620 Nitrile Rubber Seal, 34mm Id, 50mm Od, 8mm (1 Bag of 5)

rs pro 2270620 nitrile rubber seal, 34mm id, 50mm od, 8mm (1 bag 5) segel karet nitril, id 34mm, od 50mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 34mm，外径 50mm，8mm（1 个） rs专业版

rs-pro-2270620-nitrile-rubber-seal-34mm-id-50mm-od-8mm-1-bag-of-5

Rs Pro 2556984 Nitrile O-Ring, 32mm Bore, 34mm Outer Diameter (1 Bag of 100)

rs pro 2556984 nitrile o-ring, 32mm bore, 34mm outer diameter (1 bag 100) nitril lubang 32mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，32mm 内径，34mm 外径（1 100 个） o型圈 rs专业版

rs-pro-2556984-nitrile-o-ring-32mm-bore-34mm-outer-diameter-1-bag-of-100

Rs Pro 2556756 Nitrile O-Ring, 26mm Bore, 34mm Outer Diameter (1 Bag of 50)

rs pro 2556756 nitrile o-ring, 26mm bore, 34mm outer diameter (1 bag 50) nitril lubang 26mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，26mm 内径，34mm 外径（1 50 个） o型圈 rs专业版

rs-pro-2556756-nitrile-o-ring-26mm-bore-34mm-outer-diameter-1-bag-of-50

Rs Pro 2557046 Nitrile O-Ring, 34mm Bore, 44mm Outer Diameter (1 Bag of 25)

rs pro 2557046 nitrile o-ring, 34mm bore, 44mm outer diameter (1 bag 25) nitril lubang 34mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，34mm 内径，44mm 外径（1 25 个） o型圈 rs专业版

rs-pro-2557046-nitrile-o-ring-34mm-bore-44mm-outer-diameter-1-bag-of-25

Rs Pro 2557011 Nitrile O-Ring, 34mm Bore, 46mm Outer Diameter (1 Bag of 20)

rs pro 2557011 nitrile o-ring, 34mm bore, 46mm outer diameter (1 bag 20) nitril lubang 34mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，34 毫米内径，46 毫米外径（1 20 个） o型圈 rs专业版

rs-pro-2557011-nitrile-o-ring-34mm-bore-46mm-outer-diameter-1-bag-of-20

Condor GGS114425 Coated Gloves Nylon Nitrile L Pr

condor ggs114425 coated gloves nylon nitrile pr sarung tangan berlapis nitril nilon safety keselamatan bersalut 涂层手套尼龙丁腈 安全手套 秃鹰

condor-ggs114425-coated-gloves-nylon-nitrile-l-pr

Rs Pro 1965444 Nitrile Rubber O-Ring, 34mm Bore, 36.2mm Outer Diameter (1 Bag of 50)

rs pro 1965444 nitrile rubber o-ring, 34mm bore, 36.2mm outer diameter (1 bag 50) lubang 34mm, luar 36,2mm kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，34 毫米内径，36.2 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-1965444-nitrile-rubber-o-ring-34mm-bore-36-2mm-outer-diameter-1-bag-of-50

Rs Pro 2270561 Nitrile Rubber Seal, 24mm Id, 34mm Od, 5.5mm (1 Bag of 5)

rs pro 2270561 nitrile rubber seal, 24mm id, 34mm od, 5.5mm (1 bag 5) segel karet nitril, id 24mm, od 34mm, 5,5mm kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 24 毫米，外径 34 毫米，5.5 毫米（1 个） rs专业版

rs-pro-2270561-nitrile-rubber-seal-24mm-id-34mm-od-5-5mm-1-bag-of-5

Rs Pro 2557152 Nitrile O-Ring, 34mm Bore, 39mm Outer Diameter (1 Bag of 50)

rs pro 2557152 nitrile o-ring, 34mm bore, 39mm outer diameter (1 bag 50) nitril lubang 34mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，34 毫米内径，39 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-2557152-nitrile-o-ring-34mm-bore-39mm-outer-diameter-1-bag-of-50

Rs Pro 2556761 Nitrile O-Ring, 27mm Bore, 34mm Outer Diameter (1 Bag of 50)

rs pro 2556761 nitrile o-ring, 27mm bore, 34mm outer diameter (1 bag 50) nitril lubang 27mm, luar kantong isi ring o-ring cincin nitril, bor beg gelang 丁腈 形圈，27 毫米内径，34 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-2556761-nitrile-o-ring-27mm-bore-34mm-outer-diameter-1-bag-of-50

Rs Pro 1965509 Nitrile Rubber O-Ring, 34mm Bore, 37mm Outer Diameter (1 Bag of 50)

rs pro 1965509 nitrile rubber o-ring, 34mm bore, 37mm outer diameter (1 bag 50) luar 34mm, kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，内径 34 毫米，外径 37 毫米（1 50 个） o型圈 rs专业版

rs-pro-1965509-nitrile-rubber-o-ring-34mm-bore-37mm-outer-diameter-1-bag-of-50

Rs Pro 1964896 Nitrile Rubber O-Ring, 34mm Bore, 38mm Outer Diameter (1 Bag of 50)

rs pro 1964896 nitrile rubber o-ring, 34mm bore, 38mm outer diameter (1 bag 50) luar 34mm, kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，34 毫米内径，38 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-1964896-nitrile-rubber-o-ring-34mm-bore-38mm-outer-diameter-1-bag-of-50

Rs Pro 1965506 Nitrile Rubber O-Ring, 31mm Bore, 34mm Outer Diameter (1 Bag of 50)

rs pro 1965506 nitrile rubber o-ring, 31mm bore, 34mm outer diameter (1 bag 50) o-ring karet nitril, lubang 31mm, luar kantong isi ring cincin getah bor beg gelang 丁腈橡胶 形圈，内径 31 毫米，外径 34 毫米（1 50 个） o型圈 rs专业版

rs-pro-1965506-nitrile-rubber-o-ring-31mm-bore-34mm-outer-diameter-1-bag-of-50

Condor 60VY85 Coated Gloves 2XL Nylon Nitrile Pr

condor 60vy85 coated gloves 2xl nylon nitrile pr sarung tangan berlapis nilon nitril safety keselamatan bersalut 涂层手套 尼龙丁腈橡胶 安全手套 秃鹰

condor-60vy85-coated-gloves-2xl-nylon-nitrile-pr

Rs Pro 1965044 Nitrile Rubber O-Ring, 34mm Bore, 40mm Outer Diameter (1 Bag of 50)

rs pro 1965044 nitrile rubber o-ring, 34mm bore, 40mm outer diameter (1 bag 50) luar 34mm, kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，内径 34 毫米，外径 40 毫米（1 50 个） o型圈 rs专业版

rs-pro-1965044-nitrile-rubber-o-ring-34mm-bore-40mm-outer-diameter-1-bag-of-50

Rs Pro 1964891 Nitrile Rubber O-Ring, 30mm Bore, 34mm Outer Diameter (1 Bag of 50)

rs pro 1964891 nitrile rubber o-ring, 30mm bore, 34mm outer diameter (1 bag 50) luar 30mm, kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，内径 30 毫米，外径 34 毫米（1 50 个） o型圈 rs专业版

rs-pro-1964891-nitrile-rubber-o-ring-30mm-bore-34mm-outer-diameter-1-bag-of-50

Rs Pro 1965428 Nitrile Rubber O-Ring, 34mm Bore, 36mm Outer Diameter (1 Bag of 50)

rs pro 1965428 nitrile rubber o-ring, 34mm bore, 36mm outer diameter (1 bag 50) lubang 34mm, luar kantong isi ring o-ring cincin getah nitril, bor beg gelang 丁腈橡胶 形圈，34 毫米内径，36 毫米外径（1 50 个） o型圈 rs专业版

rs-pro-1965428-nitrile-rubber-o-ring-34mm-bore-36mm-outer-diameter-1-bag-of-50

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING JIS B2401 P34 ID 33.70 x CS 3.50Material : Nitrile (NBR) 90 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/a4w3hx92JQTkm9QqlhP7MK.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P34
&nbsp;ID 33.70 x CS 3.50
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:ddido"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/a4w3hx92JQTkm9QqlhP7MK.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="ddido" 
 layout="nodisplay"></amp-image-lightbox>

John

Optibelt

Gates

SAMTECH

VITON

V Rings

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING JIS B2401 P34 ID 33.70 x CS 3.50 Nitrile (NBR) 90 Shore

oring jis b2401 p34 id 33.70 cs 3.50 nitrile (nbr) 90 shore ring o-ring oem pantai gelang oem/oem代工 3.50丁腈（nbr）90肖氏 o型圈 oem代工

oring-jis-b2401-p34-id-33-70-x-cs-3-50-nitrile-nbr-90-shore

ORING JIS B2401 P34 ID 33.70 x CS 3.50Material : Nitrile (NBR) 70 Shore Nitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage <ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/Fp~ufx5Yr8WWALpHHQ5rYI.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING JIS B2401 P34&nbsp;
ID 33.70 x CS 3.50
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;&nbsp;
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage

<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:esf12"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/Fp~ufx5Yr8WWALpHHQ5rYI.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="esf12" 
 layout="nodisplay"></amp-image-lightbox>

ORING JIS B2401 P34 ID 33.70 x CS 3.50 Nitrile (NBR) 70 Shore

oring jis b2401 p34 id 33.70 cs 3.50 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 3.50腈（nbr）70肖氏 o型圈 oem代工