ATLAS FILTRI

CEM instruments

FLUKE

RS Pro

SECFETRONIK

Test & Measurement

test-measurement

Anemometers

anemometers

Cleaning

cleaning

Bags, Filters & Accessories

bags-filters-accessories

Electricals

electricals

Cable Gland

cable-gland

Calibrators

calibrators

Pliers

pliers

Crimping & Stripping Pilers

crimping-stripping-pilers

Insulation Testers

insulation-testers

Multimeters

multimeters

M20 METAL CABLE GLAND with Locknut, IP68 BRASS

Temperature Limited: min. -40°C up to max. 100°C, short-term 120°C

· Connection is closer with O-ring and more secured with entire rubber seal.

M20 METAL CABLE GLAND with Locknut, IP68 BRASSThread Size &amp; Pitch: M20 x 1.5Material: Brass, Nickel platedPlastic Material: PA66Cable Diameter Range: 8 mm – 14 mmThread Length (GL): 8 mmHeight (H): 22 mmSealing Material: SiliconLocknut Included: YesTemperature Limited: min. -40°C up to max. 100°C, short-term 120°CIP RATING: IP68Approvals: UL, CE, ROHSFeature: · Connection is closer with O-ring and more secured with entire rubber seal.

&nbsp;&nbsp;&nbsp;&nbsp;
M20 METAL CABLE GLAND with Locknut, IP68 BRASS
Thread Size &amp; Pitch: M20 x 1.5
Material: Brass, Nickel plated
Plastic Material: PA66
Cable Diameter Range: 8 mm – 14 mm
Thread Length (GL): 8 mm
Height (H): 22 mm
Sealing Material: Silicon
Locknut Included: Yes
Temperature Limited: min. -40°C up to max. 100°C, short-term 120°C
IP RATING: IP68
Approvals: UL, CE, ROHS
Feature:&nbsp;
· Connection is closer with O-ring and more secured with entire rubber seal.

Specifications

Electrical Switches

Van Molo

buyerIntroduction

Secfetronik M20 Metal Cable Gland With Locknut, Ip68 Nickel Plated Brass

secfetronik m20 metal cable gland locknut, ip68 nickel plated brass kabel logam dengan mur pengunci, kuningan berlapis nikel kelenjar loyang bersalut 金属电缆密封套带锁紧螺母，ip68 镀镍黄铜 电缆接头

secfetronik-m20-metal-cable-gland-with-locknut-ip68-nickel-plated-brass

PLUS SX housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute product quality. PLUS SX housings are suitable for every Point-of-Entry (POE) application, as single stage on-line filter

Non-toxic materials, suitable for drinking water

Head and ring nut: reinforced polypropylene

Filter Cartridge Type: SX – Standard flat seals WITHOUT O-ring

Filter housings made in PET, a highly recyclable plastic, are manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. That is one of Atlas Filtri commitments for the reduction of green house gas (CO2) emissions in the atmosphere

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #AtlasFiltri #MadeInItaly #SeniorPlus #WaterFilter #FilterCartridge  #RA109T411 #RE5114411 

PLUS SX housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute product quality. PLUS SX housings are suitable for every Point-of-Entry (POE) application, as single stage on-line filterCountry of origin: ItalyEach set comprises of:<ul class="md-block-unordered-list-item"><li>1x House with brass BSP threads</li><li>1x Filter cartridge</li><li>1x U-spanner</li><li>1x S-wall bracket &amp; anchoring screws</li></ul>Working conditions:<ul class="md-block-unordered-list-item"><li>Max working pressure: 8 bar (116 psi)</li><li>Max working temperature: 45°C (113°F)</li><li>Min working temperature: 4°C (39.2°F)</li></ul>Specifications:<ul class="md-block-unordered-list-item"><li>Non-toxic materials, suitable for drinking water</li><li>Head and ring nut: reinforced polypropylene</li><li>Housing Model: Junior - Single</li><li>Port Type: PLUS</li><li>Version: 3P</li><li>Inlet / Outlet Sizing: A - 3/4”</li><li> A x B x C (mm): (241 x 133 x 130)mm </li><li>Thread Type: FO-Brass BSP CW 617 N brass</li><li>Bowl Type: TS – Clear (PET)</li><li>Filter Cartridge Type: SX – Standard flat seals WITHOUT O-ring</li></ul>Filter housings made in PET, a highly recyclable plastic, are manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. That is one of Atlas Filtri commitments for the reduction of green house gas (CO2) emissions in the atmosphere#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #AtlasFiltri #MadeInItaly #SeniorPlus #WaterFilter #FilterCartridge #RA109T411 #RE5114411

PLUS SX housings are manufactured with the finest and most advanced materials under constant focus on innovative processing technologies and ceaseless modernization to ensure the absolute product quality. PLUS SX housings are suitable for every Point-of-Entry (POE) application, as single stage on-line filter
Country of origin: Italy
Each set comprises of:
<ul>
<li>1x House with brass BSP threads</li>
<li>1x Filter cartridge</li>
<li>1x U-spanner</li>
<li>1x S-wall bracket &amp; anchoring screws</li>
</ul>
Working conditions:
<ul>
<li>Max working pressure: 8 bar (116 psi)</li>
<li>Max working temperature: 45°C (113°F)</li>
<li>Min working temperature: 4°C (39.2°F)</li>
</ul>
Specifications:
<ul>
<li>Non-toxic materials, suitable for drinking water</li>
<li>Head and ring nut: reinforced polypropylene</li>
<li>Housing Model: Junior - Single</li>
<li>Port Type: PLUS</li>
<li>Version: 3P</li>
<li>Inlet / Outlet Sizing: A - 3/4”</li>
<li>&nbsp;A x B x C (mm): (241 x 133 x 130)mm&nbsp;&nbsp;</li>
<li>Thread Type: FO-Brass BSP CW 617 N brass</li>
<li>Bowl Type: TS – Clear (PET)</li>
<li>Filter Cartridge Type: SX – Standard flat seals WITHOUT O-ring</li>
</ul>
Filter housings made in PET, a highly recyclable plastic, are manufactured with a proprietary procedure saving up to 60% of energy in injection molding compared with standard plastics. That is one of Atlas Filtri commitments for the reduction of green house gas (CO2) emissions in the atmosphere
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #AtlasFiltri #MadeInItaly #SeniorPlus #WaterFilter #FilterCartridge #RA109T411 #RE5114411&nbsp;

Others

RJ LONDON PAINT

SEALXPERT

BRADY

Cable Ties

Wire Brushes

Cable Carriers

Clearing Drainage Chokes

Painting Tools

Paint Thinners, Solvents & Cleaners

Epoxy

Wall Plugs, Anchors, Fixings & Kits

Stationery Tapes

Scrapers

Keith Pey

Atlas Filtri Junior Plus 3P Afo Sx Ts Housing and Filter Cartridge RA109T411

atlas filtri junior plus 3p afo sx ts housing filter cartridge ra109t411 dan kartrid bags, filters accessories tas, aksesoris perumahan katrij penapis beg, aksesori filtri/阿特拉斯滤镜 外壳和滤芯 包装，过滤器和配件 阿特拉斯滤镜

atlas-filtri-junior-plus-3p-afo-sx-ts-housing-and-filter-cartridge-ra109t411

RS PRO Datasheet

RS PRO Guide UK

Siemens

STANLEY

SCHNEIDER ELECTRIC

ECLIPSE TOOLS

Facom

RAPID

PEGLER YORKSHIRE

Screw

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Junction & Enclosure Box

Aluminium Capacitors

RS Components ETH SG

Rs Pro 7639804 Wire Stripper, 0.08mm Min, 6mm Max, 203 Mm Overall

rs pro 7639804 wire stripper, 0.08mm min, 6mm max, 203mm overall min 0,08mm, maks 6mm, keseluruhan crimping stripping pilers piler pengupasan pelucut wayar, maks, playar mengelim menanggal 剥线钳，最小 0.08 毫米，最大 毫米，总长 毫米 压接剥皮堆垛机 rs专业版

rs-pro-7639804-wire-stripper-0-08mm-min-6mm-max-203-mm-overall

CMM/CFM Thermo-Anemometers
Model No. DT-8894

CFM/CMM Thermo-Anemometer with built-in non-contact IR Thermometer measure remote surface temperature to 500ºC (932ºF) and 30:1 distance to spot ratio.

Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature

Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on

Super large (9999 counts) LCD Backlit Display

3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable

Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster

Range: -50 to -20ºC(-58 to -4ºF); Accuracy: ±5.0ºC(9.0ºF)

Range: -20 to 500°C(-4 to 932ºF); Accuracy: ±2% reading

<h1 class="md-block-header-one">CMM/CFM Thermo-Anemometers Model No. DT-8894</h1>CFM/CMM Thermo-Anemometer with built-in non-contact IR Thermometer measure remote surface temperature to 500ºC (932ºF) and 30:1 distance to spot ratio.Features<ul class="md-block-unordered-list-item"><li>Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature</li><li>Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on</li><li>Resolution of 0.01m/sec</li><li>20 points average for Air Flow</li><li>Super large (9999 counts) LCD Backlit Display</li><li>3% velocity accuracy via low friction 2.83&quot;D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable</li><li>Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster</li><li>MAX/MIN, Data Hold functions</li><li>Air Velocity</li><ul class="md-block-unordered-list-item"><li>Unit: m/s(meter per second)</li><ul class="md-block-unordered-list-item"><li>Range: 0.40~30.00</li><li>Accuracy: ±3% ±0.20m/s</li></ul><li>Unit: ft/min(feet per minute)</li><ul class="md-block-unordered-list-item"><li>Range: 80~5900</li><li>Accuracy: ±3% ±40ft/min</li></ul><li>Unit: km/h(kilometers per hour)</li><ul class="md-block-unordered-list-item"><li>Range: 1.4~108.0</li><li>Accuracy: ±3% ±0.8km/h</li></ul><li>Unit: MPH(miles per hour)</li><ul class="md-block-unordered-list-item"><li>Range: 0.9~67.0</li><li>Accuracy: ±3% ±0.4MPH</li></ul><li>Unit: Knots(nautical miles per hour)</li><ul class="md-block-unordered-list-item"><li>Range: 0.8~58.0</li><li>Accuracy: ±3% ±0.4knots</li></ul></ul><li>Air Temperature</li><ul class="md-block-unordered-list-item"><li>Range: -10-60ºC(14-140ºF)</li><li>Accuracy: ±2.0ºC(4.0ºF)</li></ul><li>InfraRed Temperature</li><ul class="md-block-unordered-list-item"><li>Range: -50 to -20ºC(-58 to -4ºF); Accuracy: ±5.0ºC(9.0ºF)</li><li>Range: -20 to 500°C(-4 to 932ºF); Accuracy: ±2% reading</li></ul><li>Air Flow</li><ul class="md-block-unordered-list-item"><li>CFM</li><ul class="md-block-unordered-list-item"><li>Range: 0-999900</li><li>Area: 0-999.9 ft2</li></ul><li>CMM</li><ul class="md-block-unordered-list-item"><li>Range: 0-999900</li><li>Area: 0-999.9 m2</li></ul></ul><li>Weight: 280g</li><li>Dimensions:</li><ul class="md-block-unordered-list-item"><li>Main instrument: 203mm x 75mm x 50mm</li></ul><li>Standard Certification:</li><ul class="md-block-unordered-list-item"><li>CE</li><li>EMC</li><li>EN: 61326</li></ul><li>Package includes:</li><ul class="md-block-unordered-list-item"><li>Anemometer &amp; Anemo probe</li><li>USB cable</li><li>Software</li><li>Users manual</li><li>9V Battery</li><li>Gift box with carrying case</li></ul></ul>

<h1>CMM/CFM Thermo-Anemometers 
Model No. DT-8894</h1>
CFM/CMM Thermo-Anemometer with built-in non-contact IR Thermometer measure remote surface temperature to 500ºC (932ºF) and 30:1 distance to spot ratio.
Features
<ul>
<li>Simultaneous display of Air Flow or Air Velocity plus Ambient Temperature</li>
<li>Easy to set Area dimensions (cm2) are stored in the meter’s internal memory for the next power on</li>
<li>Resolution of 0.01m/sec</li>
<li>20 points average for Air Flow</li>
<li>Super large (9999 counts) LCD Backlit Display</li>
<li>3% velocity accuracy via low friction 2.83"D (72mm) ball bearing vane wheel on 3.9ft (120cm) cable</li>
<li>Complete with vane sensor with 3.9ft (120cm) cable, 9V battery, and protective rubber holster</li>
<li>MAX/MIN, Data Hold functions</li>
<li>Air Velocity</li>
<ul>
<li>Unit: m/s(meter per second)</li>
<ul>
<li>Range: 0.40~30.00</li>
<li>Accuracy: ±3% ±0.20m/s</li>
</ul>
<li>Unit: ft/min(feet per minute)</li>
<ul>
<li>Range: 80~5900</li>
<li>Accuracy: ±3% ±40ft/min</li>
</ul>
<li>Unit: km/h(kilometers per hour)</li>
<ul>
<li>Range: 1.4~108.0</li>
<li>Accuracy: ±3% ±0.8km/h</li>
</ul>
<li>Unit: MPH(miles per hour)</li>
<ul>
<li>Range: 0.9~67.0</li>
<li>Accuracy: ±3% ±0.4MPH</li>
</ul>
<li>Unit: Knots(nautical miles per hour)</li>
<ul>
<li>Range: 0.8~58.0</li>
<li>Accuracy: ±3% ±0.4knots</li>
</ul>
</ul>
<li>Air Temperature</li>
<ul>
<li>Range: -10-60ºC(14-140ºF)</li>
<li>Accuracy: ±2.0ºC(4.0ºF)</li>
</ul>
<li>InfraRed Temperature</li>
<ul>
<li>Range: -50 to -20ºC(-58 to -4ºF); Accuracy: ±5.0ºC(9.0ºF)</li>
<li>Range: -20 to 500°C(-4 to 932ºF); Accuracy: ±2% reading</li>
</ul>
<li>Air Flow</li>
<ul>
<li>CFM</li>
<ul>
<li>Range: 0-999900</li>
<li>Area: 0-999.9 ft2</li>
</ul>
<li>CMM</li>
<ul>
<li>Range: 0-999900</li>
<li>Area: 0-999.9 m2</li>
</ul>
</ul>
<li>Weight: 280g</li>
<li>Dimensions:</li>
<ul>
<li>Main instrument: 203mm x 75mm x 50mm</li>
</ul>
<li>Standard Certification:</li>
<ul>
<li>CE</li>
<li>EMC</li>
<li>EN: 61326</li>
</ul>
<li>Package includes:</li>
<ul>
<li>Anemometer &amp; Anemo probe</li>
<li>USB cable</li>
<li>Software</li>
<li>Users manual</li>
<li>9V Battery</li>
<li>Gift box with carrying case</li>
</ul>
</ul>

YK Yeo

Cem DT-8894 Cfm/cmm Thermo-anemometer With Infrared Thermometer

cem dt-8894 cfm/cmm thermo-anemometer infrared thermometer cfm cmm dengan inframerah anemometers instruments termometer instruments/cem仪器 cmm红外测温仪 cem仪器

cem-dt-8894-cfm-cmm-thermo-anemometer-with-infrared-thermometer

Fluke 27-II Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max

 IP67 rated multimeter for operating in harsh conditions with features and accuracy to troubleshoot most electrical problems


Designed to withstand 3 metre drop
-15° C to + 55°C extended operating temperature range
Extended AC voltage bandwidth, 15Hz to 20 kHz
Average responding voltage and current for measurements
Easy to read large digit display with a bright, two-level backlight
Backlit keypad buttons allows for easy visibility in low-lit areas
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits
Sleep mode for long battery life
Relative mode to remove test lead resistance from low ohms measurements
Min/Max and average recording
Auto and manual ranging for maximum flexibility
Resistance, continuity and diode test
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
US Mine Safety & Health Administration approval (MSHA)
Dimensions: 61 X 102 X 203 mm
Safety rating CAT IV 600 V , CAT III 1000V


Fluke 27 II and Fluke 28 II Additional Benefits:

Works in the toughest environments
IP 67 (Waterproof and Dustproof)
MSHA Approvals
Battery life of 800 hours
Battery life of 800 hours
28-II Additional Features:
Hi Resolution 20,000 count display mode
True-rms ac voltage and current for accurate measurements on non linear signals
Low pass filter function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment
K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple supplied)


Test leads and crocodile clips, 3 AA alkaline batteries (800 Hrs)

FLUKE Multimeter, 800h Battery Life, Digital Display - Fluke 27-II

Use this multimeter from FLUKE to cover all your measuring needs. This unit takes highly accurate measures of AC and DC current, as well as voltage, capacitance and resistance. This makes it a one-stop, trusty tool for all your electrical jobs. As it has a wide-ranging operating temperature range of -15°C to +55°C, you can rely on this sturdy multimeter to cope with the demands of challenging environments. The device comes with a magnetic hanger for easy viewing during those tricky moments when you need both hands free.


• Long battery life of 800 hours
• IP67 rating means it's waterproof and dustproof for safe use in harsh environments
• 20,000 count display mode, backlight and large digits for high-quality visuals
• Tough design can withstand a drop from up to 3m
• Keypab buttons are backlit, for easy use in low lighting


• Commercial wiring installation
• Manufacturing facilities
• Automotive repairs


Can I take temperatures with this multimeter?

Yes, it comes with an integrated DMM thermocouple, so you can safely read temperatures as part of your diagnostics.


The unit measures 198.1 (L) x 100 (W) x 63.5mm (H), so it's easy to handle.


<h3 class="md-block-header-three">Fluke 27-II Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3> IP67 rated multimeter for operating in harsh conditions with features and accuracy to troubleshoot most electrical problems <h3 class="md-block-header-three">Features and Benefits:</h3>Designed to withstand 3 metre drop -15° C to + 55°C extended operating temperature range Extended AC voltage bandwidth, 15Hz to 20 kHz Average responding voltage and current for measurements Easy to read large digit display with a bright, two-level backlight Backlit keypad buttons allows for easy visibility in low-lit areas Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits Sleep mode for long battery life Relative mode to remove test lead resistance from low ohms measurements Min/Max and average recording Auto and manual ranging for maximum flexibility Resistance, continuity and diode test Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks US Mine Safety &amp; Health Administration approval (MSHA) Dimensions: 61 X 102 X 203 mm Safety rating CAT IV 600 V , CAT III 1000V <h3 class="md-block-header-three">Fluke 27 II and Fluke 28 II Additional Benefits:</h3>Works in the toughest environments IP 67 (Waterproof and Dustproof) MSHA Approvals Battery life of 800 hours Battery life of 800 hours 28-II Additional Features: Hi Resolution 20,000 count display mode True-rms ac voltage and current for accurate measurements on non linear signals Low pass filter function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple supplied) <h3 class="md-block-header-three">Supplied with</h3>Test leads and crocodile clips, 3 AA alkaline batteries (800 Hrs)<h3 class="md-block-header-three">FLUKE Multimeter, 800h Battery Life, Digital Display - Fluke 27-II</h3>Use this multimeter from FLUKE to cover all your measuring needs. This unit takes highly accurate measures of AC and DC current, as well as voltage, capacitance and resistance. This makes it a one-stop, trusty tool for all your electrical jobs. As it has a wide-ranging operating temperature range of -15°C to +55°C, you can rely on this sturdy multimeter to cope with the demands of challenging environments. The device comes with a magnetic hanger for easy viewing during those tricky moments when you need both hands free. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Long battery life of 800 hours • IP67 rating means it&#x27;s waterproof and dustproof for safe use in harsh environments • 20,000 count display mode, backlight and large digits for high-quality visuals • Tough design can withstand a drop from up to 3m • Keypab buttons are backlit, for easy use in low lighting <h3 class="md-block-header-three">Applications</h3>• Commercial wiring installation • Manufacturing facilities • Automotive repairs <h3 class="md-block-header-three">Can I take temperatures with this multimeter?</h3>Yes, it comes with an integrated DMM thermocouple, so you can safely read temperatures as part of your diagnostics. <h3 class="md-block-header-three">What size is this unit?</h3>The unit measures 198.1 (L) x 100 (W) x 63.5mm (H), so it&#x27;s easy to handle. <h3 class="md-block-header-three">Standards</h3>CAT IV 600 V, CAT III 1000V

<h3>Fluke 27-II Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3>
&nbsp;IP67 rated multimeter for operating in harsh conditions with features and accuracy to troubleshoot most electrical problems 

<h3>Features and Benefits:</h3>
Designed to withstand 3 metre drop 
-15° C to + 55°C extended operating temperature range 
Extended AC voltage bandwidth, 15Hz to 20 kHz 
Average responding voltage and current for measurements 
Easy to read large digit display with a bright, two-level backlight 
Backlit keypad buttons allows for easy visibility in low-lit areas 
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits 
Sleep mode for long battery life 
Relative mode to remove test lead resistance from low ohms measurements 
Min/Max and average recording 
Auto and manual ranging for maximum flexibility 
Resistance, continuity and diode test 
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks 
US Mine Safety &amp; Health Administration approval (MSHA) 
Dimensions: 61 X 102 X 203 mm 
Safety rating CAT IV 600 V , CAT III 1000V 

<h3>Fluke 27 II and Fluke 28 II Additional Benefits:</h3>
Works in the toughest environments 
IP 67 (Waterproof and Dustproof) 
MSHA Approvals 
Battery life of 800 hours 
Battery life of 800 hours 
28-II Additional Features: 
Hi Resolution 20,000 count display mode 
True-rms ac voltage and current for accurate measurements on non linear signals 
Low pass filter function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment 
K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple supplied) 

<h3>Supplied with</h3>
Test leads and crocodile clips, 3 AA alkaline batteries (800 Hrs)
<h3>FLUKE Multimeter, 800h Battery Life, Digital Display - Fluke 27-II</h3>
Use this multimeter from FLUKE to cover all your measuring needs. This unit takes highly accurate measures of AC and DC current, as well as voltage, capacitance and resistance. This makes it a one-stop, trusty tool for all your electrical jobs. As it has a wide-ranging operating temperature range of -15°C to +55°C, you can rely on this sturdy multimeter to cope with the demands of challenging environments. The device comes with a magnetic hanger for easy viewing during those tricky moments when you need both hands free. 

<h3>Features &amp; Benefits</h3>
• Long battery life of 800 hours 
• IP67 rating means it's waterproof and dustproof for safe use in harsh environments 
• 20,000 count display mode, backlight and large digits for high-quality visuals 
• Tough design can withstand a drop from up to 3m 
• Keypab buttons are backlit, for easy use in low lighting 

<h3>Applications</h3>
• Commercial wiring installation 
• Manufacturing facilities 
• Automotive repairs 

<h3>Can I take temperatures with this multimeter?</h3>
Yes, it comes with an integrated DMM thermocouple, so you can safely read temperatures as part of your diagnostics. 

<h3>What size is this unit?</h3>
The unit measures 198.1 (L) x 100 (W) x 63.5mm (H), so it's easy to handle. 

<h3>Standards</h3>
CAT IV 600 V, CAT III 1000V&nbsp;

Fluke Networks

Abus

Circular Connectors

Contactors

Molded Case Circuit Breakers - MCCBs

fluke 27-ii handheld digital multimeter, true rms, 10a ac max, dc 1000v max multimeter genggam 27-ii, maks, maks multimeters pegang tangan fluke/福禄克 手持式数字万用表，真有效值，最大交流 10a，最大直流 10a，最大交流 万用表 福禄克

fluke-27-ii-handheld-digital-multimeter-true-rms-10a-ac-max-10a-dc-max-1000v-ac-max

Fluke 1503 Insulation Tester, 500V Min, 1000V Max, 2GΩ Max, Cat Iii 600V

Maximum Insulation Resistance Measurement	2GΩ

Safety Category	CAT III 600 V, CAT IV 600V


The Fluke 1503 2G ohm electrical insulation tester is compact, rugged, reliable and easy to use. With its multiple test voltages, it is ideal for many troubleshooting, commissioning and preventative maintenance applications. The 1503 insulation tester comes with a remote probe due to which repetitive or hard-to-reach testing is made easy. Test leads, probes and alligator clips are also included. The testing voltage of this tester ranges between 500V and 1000V. This 1503 device is battery powered and has 4 AA battery type.

• Battery-powered for portability and convenience
• Compatible with FLUKE TPAK magnetic hanging system (331-7402) for simple storage and hands-free testing
• Safe for use in harsh environments, thanks to its broad operating temperature range between -20°C and +55°C
• 200mA Continuity
• AC/DC voltage ranges between 0.1V and 600V
• Auto discharge of capacitive voltage for added user protection
• Insulation test ranges between 0.1MΩ and 2000MΩ
L• ive circuit detection prevents insulation test if voltage > 30V is detected for added user protection
• Read measurements easily with large, graphic backlit display
• Remote probe, test leads, probes and alligator clips included with each tester
• Resistance ranges between 0.01Ω and 20.00kΩ
• Save battery power with auto power OFF

• Medical equipment
• IT systems
• Aerospace engineering
• Power plants 

<h3 class="md-block-header-three">Fluke 1503 Insulation Tester, 500V Min, 1000V Max, 2GΩ Max, Cat Iii 600V</h3><ul class="md-block-unordered-list-item"><li> Model Number p	1503</li><li>Tester Type	Insulation Tester</li><li>Maximum Test Voltage	1000V</li><li>Minimum Test Voltage	500V</li><li>Maximum Insulation Resistance Measurement	2GΩ</li><li>Display Type	Backlit LCD</li><li>Test Current	200mA</li><li>Battery Life	1000 Insulation Tests</li><li>Battery Type	AA</li><li>Power Source	Battery</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+50°C</li><li>Safety Category	CAT III 600 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li><li>Safety Category Voltage	600V</li><li>Height	50mm</li><li>Dimensions	203 x 100 x 50mm</li><li>Weight	550g</li><li>Width	100mm</li><li>Length	203mm</li></ul> The Fluke 1503 2G ohm electrical insulation tester is compact, rugged, reliable and easy to use. With its multiple test voltages, it is ideal for many troubleshooting, commissioning and preventative maintenance applications. The 1503 insulation tester comes with a remote probe due to which repetitive or hard-to-reach testing is made easy. Test leads, probes and alligator clips are also included. The testing voltage of this tester ranges between 500V and 1000V. This 1503 device is battery powered and has 4 AA battery type.Features &amp; Benefits• Battery-powered for portability and convenience • Compatible with FLUKE TPAK magnetic hanging system (331-7402) for simple storage and hands-free testing • Safe for use in harsh environments, thanks to its broad operating temperature range between -20°C and +55°C • 200mA Continuity • AC/DC voltage ranges between 0.1V and 600V • Auto discharge of capacitive voltage for added user protection • Insulation test ranges between 0.1MΩ and 2000MΩ L• ive circuit detection prevents insulation test if voltage &gt; 30V is detected for added user protection • Read measurements easily with large, graphic backlit display • Remote probe, test leads, probes and alligator clips included with each tester • Resistance ranges between 0.01Ω and 20.00kΩ • Save battery power with auto power OFFApplications• Medical equipment • IT systems • Aerospace engineering • Power plants

<h3>Fluke 1503 Insulation Tester, 500V Min, 1000V Max, 2GΩ Max, Cat Iii 600V</h3>
<ul>
<li>&nbsp;Model Number p	1503</li>
<li>Tester Type	Insulation Tester</li>
<li>Maximum Test Voltage	1000V</li>
<li>Minimum Test Voltage	500V</li>
<li>Maximum Insulation Resistance Measurement	2GΩ</li>
<li>Display Type	Backlit LCD</li>
<li>Test Current	200mA</li>
<li>Battery Life	1000 Insulation Tests</li>
<li>Battery Type	AA</li>
<li>Power Source	Battery</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Safety Category	CAT III 600 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Safety Category Voltage	600V</li>
<li>Height	50mm</li>
<li>Dimensions	203 x 100 x 50mm</li>
<li>Weight	550g</li>
<li>Width	100mm</li>
<li>Length	203mm</li>
</ul>
 
The Fluke 1503 2G ohm electrical insulation tester is compact, rugged, reliable and easy to use. With its multiple test voltages, it is ideal for many troubleshooting, commissioning and preventative maintenance applications. The 1503 insulation tester comes with a remote probe due to which repetitive or hard-to-reach testing is made easy. Test leads, probes and alligator clips are also included. The testing voltage of this tester ranges between 500V and 1000V. This 1503 device is battery powered and has 4 AA battery type.
Features &amp; Benefits
• Battery-powered for portability and convenience 
• Compatible with FLUKE TPAK magnetic hanging system (331-7402) for simple storage and hands-free testing 
• Safe for use in harsh environments, thanks to its broad operating temperature range between -20°C and +55°C 
• 200mA Continuity 
• AC/DC voltage ranges between 0.1V and 600V 
• Auto discharge of capacitive voltage for added user protection 
• Insulation test ranges between 0.1MΩ and 2000MΩ 
L• ive circuit detection prevents insulation test if voltage &gt; 30V is detected for added user protection 
• Read measurements easily with large, graphic backlit display 
• Remote probe, test leads, probes and alligator clips included with each tester 
• Resistance ranges between 0.01Ω and 20.00kΩ 
• Save battery power with auto power OFF
Applications
• Medical equipment 
• IT systems 
• Aerospace engineering 
• Power plants&nbsp;

1507/1503 Insulation Tester Quick Reference Guide

1507/1503 Insulation Tester Users Manual

FLUKE® 1507/1503 Technical Data

fluke 1503 insulation tester, 500v min, 1000v max, 2gω cat iii 600v alat uji isolasi 1503, min 500v, maks 1000v, 2gω, testers penguji penebat maks, fluke/福禄克 绝缘测试仪，最小 500v，最大 1000v，最大 2gω，cat 福禄克

fluke-1503-insulation-tester-500v-min-1000v-max-2g-max-cat-iii-600v

Fluke 28-II Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max

FLUKE Multimeter, Digital Display, 800h Battery Life

For a tool that measures up to your expectations, look to this multimeter from FLUKE. Designed to cover all your electrical testing needs, it reads AC/DC voltage and current, as well as capacitance, frequency and resistance. To add an extra layer of versatility, it can be used to test diodes and take temperatures. The bright digital display and backlit keypad make it simple to use, even in dingy spots. As the tough unit can withstand spikes of up to 8000V and operate between -15°C to +55°C, this is a hardy piece of kit that you can rely on in demanding conditions.


• 800-hour battery life to keep you going in the long term
• Light weight of 698.5g for easy handling
• Auto and manual ranging gives you optimal flexibility
• Handy magnetic hanger frees up both hands to you can measure while you work


• Building maintenance
• Electronics manufacture
• Assembly lines


The unit runs on 3 standard AA batteries, so you'll have no problem finding replacements.


It has an IP67 rating, which means that it's dustproof and waterproof, so can handle the demands of harsh workplaces.


<h3 class="md-block-header-three">Fluke 28-II Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3> IP67 rated multimeter for operating in harsh conditions with features and accuracy to troubleshoot most electrical problems <h3 class="md-block-header-three">Features and Benefits:</h3>Designed to withstand 3 metre drop -15° C to + 55°C extended operating temperature range Extended AC voltage bandwidth, 15Hz to 20 kHz Average responding voltage and current for measurements Easy to read large digit display with a bright, two-level backlight Backlit keypad buttons allows for easy visibility in low-lit areas Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits Sleep mode for long battery life Relative mode to remove test lead resistance from low ohms measurements Min/Max and average recording Auto and manual ranging for maximum flexibility Resistance, continuity and diode test Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks US Mine Safety &amp; Health Administration approval (MSHA) Dimensions: 61 X 102 X 203 mm Safety rating CAT IV 600 V , CAT III 1000V <h3 class="md-block-header-three">Fluke 27 II and Fluke 28 II Additional Benefits:</h3>Works in the toughest environments IP 67 (Waterproof and Dustproof) MSHA Approvals Battery life of 800 hours Battery life of 800 hours 28-II Additional Features: Hi Resolution 20,000 count display mode True-rms ac voltage and current for accurate measurements on non linear signals Low pass filter function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple supplied) <h3 class="md-block-header-three">Supplied with</h3>Test leads and crocodile clips, 3 AA alkaline batteries (800 Hrs)<h3 class="md-block-header-three">FLUKE Multimeter, Digital Display, 800h Battery Life</h3>For a tool that measures up to your expectations, look to this multimeter from FLUKE. Designed to cover all your electrical testing needs, it reads AC/DC voltage and current, as well as capacitance, frequency and resistance. To add an extra layer of versatility, it can be used to test diodes and take temperatures. The bright digital display and backlit keypad make it simple to use, even in dingy spots. As the tough unit can withstand spikes of up to 8000V and operate between -15°C to +55°C, this is a hardy piece of kit that you can rely on in demanding conditions. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• 800-hour battery life to keep you going in the long term • Light weight of 698.5g for easy handling • Auto and manual ranging gives you optimal flexibility • Handy magnetic hanger frees up both hands to you can measure while you work <h3 class="md-block-header-three">Applications</h3>• Building maintenance • Electronics manufacture • Assembly lines <h3 class="md-block-header-three">What batteries does the meter need?</h3>The unit runs on 3 standard AA batteries, so you&#x27;ll have no problem finding replacements. <h3 class="md-block-header-three">What IP rating does this product have?</h3>It has an IP67 rating, which means that it&#x27;s dustproof and waterproof, so can handle the demands of harsh workplaces. <h3 class="md-block-header-three">Standards</h3>CAT IV 600 V, CAT III 1000V

<h3>Fluke 28-II Handheld Digital Multimeter, True Rms, 10A Ac Max, 10A Dc Max, 1000V Ac Max</h3>
&nbsp;IP67 rated multimeter for operating in harsh conditions with features and accuracy to troubleshoot most electrical problems 

<h3>Features and Benefits:</h3>
Designed to withstand 3 metre drop 
-15° C to + 55°C extended operating temperature range 
Extended AC voltage bandwidth, 15Hz to 20 kHz 
Average responding voltage and current for measurements 
Easy to read large digit display with a bright, two-level backlight 
Backlit keypad buttons allows for easy visibility in low-lit areas 
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits 
Sleep mode for long battery life 
Relative mode to remove test lead resistance from low ohms measurements 
Min/Max and average recording 
Auto and manual ranging for maximum flexibility 
Resistance, continuity and diode test 
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks 
US Mine Safety &amp; Health Administration approval (MSHA) 
Dimensions: 61 X 102 X 203 mm 
Safety rating CAT IV 600 V , CAT III 1000V 

<h3>Fluke 27 II and Fluke 28 II Additional Benefits:</h3>
Works in the toughest environments 
IP 67 (Waterproof and Dustproof) 
MSHA Approvals 
Battery life of 800 hours 
Battery life of 800 hours 
28-II Additional Features: 
Hi Resolution 20,000 count display mode 
True-rms ac voltage and current for accurate measurements on non linear signals 
Low pass filter function for accurate voltage and frequency measurements on adjustable speed motor drives and other electrically noisy equipment 
K Type thermocouple temperature measurement. ( 80BK-A Integrated DMM thermocouple supplied) 

<h3>Supplied with</h3>
Test leads and crocodile clips, 3 AA alkaline batteries (800 Hrs)
<h3>FLUKE Multimeter, Digital Display, 800h Battery Life</h3>
For a tool that measures up to your expectations, look to this multimeter from FLUKE. Designed to cover all your electrical testing needs, it reads AC/DC voltage and current, as well as capacitance, frequency and resistance. To add an extra layer of versatility, it can be used to test diodes and take temperatures. The bright digital display and backlit keypad make it simple to use, even in dingy spots. As the tough unit can withstand spikes of up to 8000V and operate between -15°C to +55°C, this is a hardy piece of kit that you can rely on in demanding conditions. 

<h3>Features &amp; Benefits</h3>
• 800-hour battery life to keep you going in the long term 
• Light weight of 698.5g for easy handling 
• Auto and manual ranging gives you optimal flexibility 
• Handy magnetic hanger frees up both hands to you can measure while you work 

<h3>Applications</h3>
• Building maintenance 
• Electronics manufacture 
• Assembly lines 

<h3>What batteries does the meter need?</h3>
The unit runs on 3 standard AA batteries, so you'll have no problem finding replacements. 

<h3>What IP rating does this product have?</h3>
It has an IP67 rating, which means that it's dustproof and waterproof, so can handle the demands of harsh workplaces. 

<h3>Standards</h3>
CAT IV 600 V, CAT III 1000V&nbsp;

fluke 28-ii handheld digital multimeter, true rms, 10a ac max, dc 1000v max multimeter genggam 28-ii, maks, maks multimeters pegang tangan fluke/福禄克 手持式数字万用表，真有效值，最大交流 10a，最大直流 10a，最大交流 万用表 福禄克

fluke-28-ii-handheld-digital-multimeter-true-rms-10a-ac-max-10a-dc-max-1000v-ac-max

Fluke 1507 Insulation Tester, 50V Min, 1000V Max, 10GΩ Max, Cat Iii 600V

Maximum Insulation Resistance Measurement	10GΩ

 The Fluke 1507 10G ohm electrical insulation tester is compact, rugged, reliable and easy to use. The multiple test voltages make it an instrument of choice for troubleshooting, commissioning and preventative maintenance applications. The 1507 unit easily and quickly performs advanced insulation resistance testing. The remote probe helps to save time and money when performing tests. The testing voltage of this tester ranges between 50V and 1000V. This 1507 device is battery powered and has 4 AA battery type.

This 1507 insulation tester from FLUKE measures the integrity of cable jackets and ensures your equipment is in the safe zone. The unit also automatically calculates polarisation indices and dielectric absorption ratios to save time and effort. For flexibility, you can use it with 50 to 1000V installations. Repeat tests are a breeze, thanks to the built-in compare function. You can get on with testing immediately, as the instrument comes with leads, probes and alligator clips. It even has a remote probe for those hard-to-reach nooks and crannies.

• Accepts optional fluke TPAK magnetic hanging system
• Auto discharge of capacitive voltage for added user protection
• Auto power OFF
• Automatic calculation of polarisation index and dielectric absorption ratio
• Compare (Pass/Fail) function
• For added user protection, live circuit detection prevents insulation test if voltage > 30V is detected
• Insulation test ranges between 0.01MΩ and 10GΩ
• Large, backlit display
• Live circuit detection prevents insulation test when voltages is above 30V
• Remote test probe for rapid testing
• Repetitive or hard-to-reach testing easy with the remote test probe
• Weighs 550g for easy handling
• 600V RMS/DC overvoltage protection for added safety
• Battery powered for use when you're on the go

The Fluke 1507 insulation tester is ideal for advanced industrial applications
• Medical systems
• HVAC installation
• Research and development facilities
• Telecommunications equipment 

<h3 class="md-block-header-three">Fluke 1507 Insulation Tester, 50V Min, 1000V Max, 10GΩ Max, Cat Iii 600V</h3><ul class="md-block-unordered-list-item"><li>Model Number p	1507</li><li>Tester Type	Insulation Tester</li><li>Maximum Test Voltage	1000V</li><li>Minimum Test Voltage	50V</li><li>Maximum Insulation Resistance Measurement	10GΩ</li><li>Display Type	LCD</li><li>Test Current	200mA</li><li>Battery Life	1000 Insulation Tests</li><li>Power Source	Battery</li><li>Battery Type	AA</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+50°C</li><li>Safety Category Voltage	600V</li><li>Safety Category	CAT III 600 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li><li>Width	100mm</li><li>Height	50mm</li><li>Length	203mm</li><li>Weight	550g</li><li>Dimensions	203 x 100 x 50mm</li></ul> The Fluke 1507 10G ohm electrical insulation tester is compact, rugged, reliable and easy to use. The multiple test voltages make it an instrument of choice for troubleshooting, commissioning and preventative maintenance applications. The 1507 unit easily and quickly performs advanced insulation resistance testing. The remote probe helps to save time and money when performing tests. The testing voltage of this tester ranges between 50V and 1000V. This 1507 device is battery powered and has 4 AA battery type.This 1507 insulation tester from FLUKE measures the integrity of cable jackets and ensures your equipment is in the safe zone. The unit also automatically calculates polarisation indices and dielectric absorption ratios to save time and effort. For flexibility, you can use it with 50 to 1000V installations. Repeat tests are a breeze, thanks to the built-in compare function. You can get on with testing immediately, as the instrument comes with leads, probes and alligator clips. It even has a remote probe for those hard-to-reach nooks and crannies.Features &amp; Benefits• Accepts optional fluke TPAK magnetic hanging system • Auto discharge of capacitive voltage for added user protection • Auto power OFF • Automatic calculation of polarisation index and dielectric absorption ratio • Compare (Pass/Fail) function • For added user protection, live circuit detection prevents insulation test if voltage &gt; 30V is detected • Insulation test ranges between 0.01MΩ and 10GΩ • Large, backlit display • Live circuit detection prevents insulation test when voltages is above 30V • Remote test probe for rapid testing • Repetitive or hard-to-reach testing easy with the remote test probe • Weighs 550g for easy handling • 600V RMS/DC overvoltage protection for added safety • Battery powered for use when you&#x27;re on the goApplicationsThe Fluke 1507 insulation tester is ideal for advanced industrial applications • Medical systems • HVAC installation • Research and development facilities • Telecommunications equipment

<h3>Fluke 1507 Insulation Tester, 50V Min, 1000V Max, 10GΩ Max, Cat Iii 600V</h3>
<ul>
<li>Model Number p	1507</li>
<li>Tester Type	Insulation Tester</li>
<li>Maximum Test Voltage	1000V</li>
<li>Minimum Test Voltage	50V</li>
<li>Maximum Insulation Resistance Measurement	10GΩ</li>
<li>Display Type	LCD</li>
<li>Test Current	200mA</li>
<li>Battery Life	1000 Insulation Tests</li>
<li>Power Source	Battery</li>
<li>Battery Type	AA</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+50°C</li>
<li>Safety Category Voltage	600V</li>
<li>Safety Category	CAT III 600 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Width	100mm</li>
<li>Height	50mm</li>
<li>Length	203mm</li>
<li>Weight	550g</li>
<li>Dimensions	203 x 100 x 50mm</li>
</ul>
&nbsp;The Fluke 1507 10G ohm electrical insulation tester is compact, rugged, reliable and easy to use. The multiple test voltages make it an instrument of choice for troubleshooting, commissioning and preventative maintenance applications. The 1507 unit easily and quickly performs advanced insulation resistance testing. The remote probe helps to save time and money when performing tests. The testing voltage of this tester ranges between 50V and 1000V. This 1507 device is battery powered and has 4 AA battery type.
This 1507 insulation tester from FLUKE measures the integrity of cable jackets and ensures your equipment is in the safe zone. The unit also automatically calculates polarisation indices and dielectric absorption ratios to save time and effort. For flexibility, you can use it with 50 to 1000V installations. Repeat tests are a breeze, thanks to the built-in compare function. You can get on with testing immediately, as the instrument comes with leads, probes and alligator clips. It even has a remote probe for those hard-to-reach nooks and crannies.
Features &amp; Benefits
• Accepts optional fluke TPAK magnetic hanging system 
• Auto discharge of capacitive voltage for added user protection 
• Auto power OFF 
• Automatic calculation of polarisation index and dielectric absorption ratio 
• Compare (Pass/Fail) function 
• For added user protection, live circuit detection prevents insulation test if voltage &gt; 30V is detected 
• Insulation test ranges between 0.01MΩ and 10GΩ 
• Large, backlit display 
• Live circuit detection prevents insulation test when voltages is above 30V 
• Remote test probe for rapid testing 
• Repetitive or hard-to-reach testing easy with the remote test probe 
• Weighs 550g for easy handling 
• 600V RMS/DC overvoltage protection for added safety 
• Battery powered for use when you're on the go
Applications
The Fluke 1507 insulation tester is ideal for advanced industrial applications 
• Medical systems 
• HVAC installation 
• Research and development facilities 
• Telecommunications equipment&nbsp;

fluke 1507 insulation tester, 50v min, 1000v max, 10gω cat iii 600v alat uji isolasi 1507, min 50v, maks 1000v, 10gω, testers penguji penebat maks, fluke/福禄克 绝缘测试仪，最小 50v，最大 1000v，最大 10gω，cat 福禄克

fluke-1507-insulation-tester-50v-min-1000v-max-10g-max-cat-iii-600v

Fluke 1577 Insulation Tester, 500V Min, 1000V Max, 2GΩ Max, Cat Iii 1000V

Safety Category	CAT III 1000 V, CAT IV 600V

• Comes with remote probe, test leads and alligator clips, so it's ready to go straight out of the box
• Long battery life lets you complete 1,000 tests without stopping
• Auto-off feature saves power, making it an energy-conscious option
• Rugged case helps protect your instrument from bumps and scratches in the field

• Motor maintenance
• Plant machinery
• Telecommunications industry 

<h3 class="md-block-header-three">Fluke 1577 Insulation Tester, 500V Min, 1000V Max, 2GΩ Max, Cat Iii 1000V</h3><ul class="md-block-unordered-list-item"><li> Model Number p	1577</li><li>Tester Type	Insulation Tester</li><li>Minimum Test Voltage	500V</li><li>Maximum Test Voltage	1000V</li><li>Maximum Insulation Resistance Measurement	2GΩ</li><li>Display Type	LCD</li><li>Test Current	1mA</li><li>Power Source	Battery</li><li>Battery Life	1000 h</li><li>Battery Type	AA</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Voltage	600 V, 1000V</li><li>Safety Category Level	CAT III, CAT IV</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Weight	550g</li><li>Dimensions	203 x 100 x 50mm</li><li>Width	100mm</li><li>Height	50mm</li><li>Length	203mm</li></ul>Features &amp; Benefits• Comes with remote probe, test leads and alligator clips, so it&#x27;s ready to go straight out of the box • Long battery life lets you complete 1,000 tests without stopping • Auto-off feature saves power, making it an energy-conscious option • Rugged case helps protect your instrument from bumps and scratches in the fieldApplications• Motor maintenance • Plant machinery • Telecommunications industry

<h3>Fluke 1577 Insulation Tester, 500V Min, 1000V Max, 2GΩ Max, Cat Iii 1000V</h3>
<ul>
<li>&nbsp;Model Number p	1577</li>
<li>Tester Type	Insulation Tester</li>
<li>Minimum Test Voltage	500V</li>
<li>Maximum Test Voltage	1000V</li>
<li>Maximum Insulation Resistance Measurement	2GΩ</li>
<li>Display Type	LCD</li>
<li>Test Current	1mA</li>
<li>Power Source	Battery</li>
<li>Battery Life	1000 h</li>
<li>Battery Type	AA</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Voltage	600 V, 1000V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Weight	550g</li>
<li>Dimensions	203 x 100 x 50mm</li>
<li>Width	100mm</li>
<li>Height	50mm</li>
<li>Length	203mm</li>
</ul>
Features &amp; Benefits
• Comes with remote probe, test leads and alligator clips, so it's ready to go straight out of the box 
• Long battery life lets you complete 1,000 tests without stopping 
• Auto-off feature saves power, making it an energy-conscious option 
• Rugged case helps protect your instrument from bumps and scratches in the field
Applications
• Motor maintenance 
• Plant machinery 
• Telecommunications industry&nbsp;

1587/1577 Insulation Tester Quick Reference Guide

1587/1577 Warranty and Safety Information

1587/1577  Insulation Multimeters  Users Manual

fluke 1577 insulation tester, 500v min, 1000v max, 2gω cat iii alat uji isolasi 1577, min 500v, maks 1000v, 2gω, testers penguji penebat maks, fluke/福禄克 绝缘测试仪，最小 500v，最大 1000v，最大 2gω，cat 福禄克

fluke-1577-insulation-tester-500v-min-1000v-max-2g-max-cat-iii-1000v

The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. 

With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.

Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. 

Compact digital multimeter and mA loop calibrator solution

Measure/Source/Simulate loop currents while powering the loop

Manual and automatic ramp up – ramp down functions

Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V

Range and Resolution: 1.000 A (0.440 A continuous)

Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M

Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz

Range and Resolution: 2.000 V (shows diode voltage drop)

DC Current Output (Internal Battery Operation):


Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA

Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA

DC Current Simulate (External 15 V to 48 V Loop Supply):


Automatic: Slow Ramp, Fast Ramp, 25% step

Temperature Range: 18 °C to 28 °C, for one year after calibration

Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS

Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)

Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V

Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)

<h3 class="md-block-header-three"> Fluke 787B Processmeter</h3>The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.Expand your troubleshooting capabilitiesThe Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. <ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Measure/Source/Simulate loop currents while powering the loop</li><li>Manual and automatic ramp up – ramp down functions</li><li>Easy-to-read backlit display </li></ul><h3 class="md-block-header-three">Measurement Function</h3><ul class="md-block-unordered-list-item"><li>V DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.1% + 1</li></ul><li>V AC (True-RMS): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.7% + 2</li></ul><li>mA DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 30.000 mA</li><li>Best Accuracy: 0.05% + 2</li></ul><li>A DC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 0.2% + 2</li></ul><li>A AC: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 1% + 2</li></ul><li>Resistance: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li><li>Best Accuracy: 0.2% + 1</li></ul><li>Frequency (0.5 Hz to 20 kHz): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li><li>Best Accuracy: 0.005% + 1</li></ul><li>Diode Test: </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 2.000 V (shows diode voltage drop)</li><li>Best Accuracy: 2% + 1</li></ul><li>Continuity: </li><ul class="md-block-unordered-list-item"><li>Beeps for resistance &lt; approx. 100 ohms</li></ul></ul><h3 class="md-block-header-three">Output Function</h3><ul class="md-block-unordered-list-item"><li>DC Current Output (Internal Battery Operation): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>DC Current Simulate (External 15 V to 48 V Loop Supply): </li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 1000 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li>Current Adjustment Modes: </li><ul class="md-block-unordered-list-item"><li>Manual: Coarse, Fine, 25% and 100% step</li><li>Automatic: Slow Ramp, Fast Ramp, 25% step</li></ul></ul><h3 class="md-block-header-three">Temperature Range</h3><ul class="md-block-unordered-list-item"><li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li><li>Storage Temperature: -40 °C to 60 °C</li><li>Operating Temperature: -20 °C to 55 °C</li><li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li><li>Relative Humidity: </li><ul class="md-block-unordered-list-item"><li>95% up to 30 °C</li><li>75% up to 40 °C</li><li>45% up to 50 °C</li><li>35% up to 55 °C</li></ul><li>Vibration: Random, 2 g, 5-500 Hz</li><li>Shock: 1 meter drop test</li><li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li><li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li><li>Weight: 600 g (1.3 lbs)</li><li>Battery: Four AA alkaline batteries</li><li>Battery Life: </li><ul class="md-block-unordered-list-item"><li>140 hours typical (measurement)</li><li>10 hours typical (sourcing 12 mA)</li></ul><li>Warranty: Three years</li></ul>

<h3> Fluke 787B Processmeter</h3>
The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications.&nbsp;
With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.
*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.
Expand your troubleshooting capabilities
The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.
Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes.&nbsp;
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Measure/Source/Simulate loop currents while powering the loop</li>
<li>Manual and automatic ramp up – ramp down functions</li>
<li>Easy-to-read backlit display&nbsp;</li>
</ul>
<h3>Measurement Function</h3>
<ul>
<li>V DC: 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.1% + 1</li>
</ul>
<li>V AC (True-RMS): 
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.7% + 2</li>
</ul>
<li>mA DC: 
</li>
<ul>
<li>Range and Resolution: 30.000 mA</li>
<li>Best Accuracy: 0.05% + 2</li>
</ul>
<li>A DC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 0.2% + 2</li>
</ul>
<li>A AC: 
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 1% + 2</li>
</ul>
<li>Resistance: 
</li>
<ul>
<li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li>
<li>Best Accuracy: 0.2% + 1</li>
</ul>
<li>Frequency (0.5 Hz to 20 kHz): 
</li>
<ul>
<li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li>
<li>Best Accuracy: 0.005% + 1</li>
</ul>
<li>Diode Test: 
</li>
<ul>
<li>Range and Resolution: 2.000 V (shows diode voltage drop)</li>
<li>Best Accuracy: 2% + 1</li>
</ul>
<li>Continuity: 
</li>
<ul>
<li>Beeps for resistance &lt; approx. 100 ohms</li>
</ul>
</ul>
<h3>Output Function</h3>
<ul>
<li>DC Current Output (Internal Battery Operation): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>DC Current Simulate (External 15 V to 48 V Loop Supply): 
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 1000 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li>Current Adjustment Modes: 
</li>
<ul>
<li>Manual: Coarse, Fine, 25% and 100% step</li>
<li>Automatic: Slow Ramp, Fast Ramp, 25% step</li>
</ul>
</ul>
<h3>Temperature Range</h3>
<ul>
<li>Temperature Range: 18 °C to 28 °C, for one year after calibration</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS</li>
<li>Storage Temperature: -40 °C to 60 °C</li>
<li>Operating Temperature: -20 °C to 55 °C</li>
<li>Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li>
<li>Relative Humidity: 
</li>
<ul>
<li>95% up to 30 °C</li>
<li>75% up to 40 °C</li>
<li>45% up to 50 °C</li>
<li>35% up to 55 °C</li>
</ul>
<li>Vibration: Random, 2 g, 5-500 Hz</li>
<li>Shock: 1 meter drop test</li>
<li>Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li>
<li>Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li>
<li>Weight: 600 g (1.3 lbs)</li>
<li>Battery: Four AA alkaline batteries</li>
<li>Battery Life: 
</li>
<ul>
<li>140 hours typical (measurement)</li>
<li>10 hours typical (sourcing 12 mA)</li>
</ul>
<li>Warranty: Three years</li>
</ul>