FLUKE

Panda Collections

PCE Instruments

Staf

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Home & Life Essentials

home-life-essentials

General Furniture

general-furniture

Machinery

machinery

Machinery Accessories

machinery-accessories

Pressure Measurement

pressure-measurement

FLUKE 717 30G -850mbar to 2bar Pressure Calibrator

 Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.


717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)

717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)

717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)

717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)


For measuring overpressure and vacuum with an internal sensor

Suitable for non-corrosive gases and liquids

Select from numerous technical units for the pressure

Simultaneous measurement of pressure and current for simple P/I or I/P testing

Zero, min. / max., hold and damp functions

Test functions for push button switches: adjusting, resetting, dead zone

CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V

Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual

FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G

Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor.
• Over pressure of 2xFS boosts safety
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process
• Supports a wide range of pressure units including psi, kPa and inHg
• Broad operating temperature range between -10°C and +55°C to endure tough conditions


• Heating systems
• Oil and gas processing
• Pharmaceuticals manufacture


What's included with this pressure calibrator?

As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.


It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.
 

<h3 class="md-block-header-three">FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3> Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. Fluke 717 series includes:717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) <h3 class="md-block-header-three">Features and Benefits:</h3><ul class="md-block-unordered-list-item"><li>For measuring overpressure and vacuum with an internal sensor</li><li>Suitable for non-corrosive gases and liquids</li><li>Select from numerous technical units for the pressure</li><li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li><li>24 V loop supply</li><li>Zero, min. / max., hold and damp functions</li><li>Test functions for push button switches: adjusting, resetting, dead zone</li></ul><h3 class="md-block-header-three">Standards</h3>CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V<h3 class="md-block-header-three">Supplied with</h3>Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual<h3 class="md-block-header-three">FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It&#x27;s designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it&#x27;s a piece of cake to carry around your factory floor. • Over pressure of 2xFS boosts safety • 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process • Supports a wide range of pressure units including psi, kPa and inHg • Broad operating temperature range between -10°C and +55°C to endure tough conditions <h3 class="md-block-header-three">Applications</h3>• Heating systems • Oil and gas processing • Pharmaceuticals manufacture <h3 class="md-block-header-three">What&#x27;s included with this pressure calibrator?</h3>As it&#x27;s supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. <h3 class="md-block-header-three">How big is this calibrator?</h3>It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.

<h3>FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</h3>
&nbsp;Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes. 

Fluke 717 series includes:
717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)
717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)
717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)
717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa) 

<h3>Features and Benefits:</h3>
<ul>
<li>For measuring overpressure and vacuum with an internal sensor</li>
<li>Suitable for non-corrosive gases and liquids</li>
<li>Select from numerous technical units for the pressure</li>
<li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li>
<li>24 V loop supply</li>
<li>Zero, min. / max., hold and damp functions</li>
<li>Test functions for push button switches: adjusting, resetting, dead zone</li>
</ul>
<h3>Standards</h3>
CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V
<h3>Supplied with</h3>
Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual
<h3>FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</h3>
Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor. 
• Over pressure of 2xFS boosts safety 
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process 
• Supports a wide range of pressure units including psi, kPa and inHg 
• Broad operating temperature range between -10°C and +55°C to endure tough conditions 

<h3>Applications</h3>
• Heating systems 
• Oil and gas processing 
• Pharmaceuticals manufacture 

<h3>What's included with this pressure calibrator?</h3>
As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away. 

<h3>How big is this calibrator?</h3>
It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands. 
&nbsp;

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke 717 30g -850mbar 2bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-717-30g-850mbar-to-2bar-pressure-calibrator

PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter 

PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.

The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.

When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust.

 – Particulate matter (PM) channels: PM 2.5, PM 10
– Particle sizes (in micrometers): 2.5 µm, 10 µm
– Temperature measuring range: 0 … +50 °C / +32 … +122 °F
– Humidity measuring range: 0 … 100 % RH
– 2″ full-color LCD with user-friendly graphics
– 220 x 176 pixel display resolution
– Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)
– Powered by rechargeable battery or AC power (via USB port)
– Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go
– Includes a stand for attaching to the thread on the back of the device
– Features an internal memory for storing up to 5000 data sets
– Saved data is stamped with the time and date
– Takes measurements even while the battery is charging
– Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes
– Programmable alarm and automatic power-off battery-saving functionality 

<h3 class="md-block-header-three">PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter </h3>PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust. – Particulate matter (PM) channels: PM 2.5, PM 10 – Particle sizes (in micrometers): 2.5 µm, 10 µm – Temperature measuring range: 0 … +50 °C / +32 … +122 °F – Humidity measuring range: 0 … 100 % RH – 2″ full-color LCD with user-friendly graphics – 220 x 176 pixel display resolution – Displays temperature in degrees Celsius (°C) or Fahrenheit (°F) – Powered by rechargeable battery or AC power (via USB port) – Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go – Includes a stand for attaching to the thread on the back of the device – Features an internal memory for storing up to 5000 data sets – Saved data is stamped with the time and date – Takes measurements even while the battery is charging – Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes – Programmable alarm and automatic power-off battery-saving functionality

<h3>PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter&nbsp;</h3>
PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.
The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.
When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust.
&nbsp;– Particulate matter (PM) channels: PM 2.5, PM 10 
– Particle sizes (in micrometers): 2.5 µm, 10 µm 
– Temperature measuring range: 0 … +50 °C / +32 … +122 °F 
– Humidity measuring range: 0 … 100 % RH 
– 2″ full-color LCD with user-friendly graphics 
– 220 x 176 pixel display resolution 
– Displays temperature in degrees Celsius (°C) or Fahrenheit (°F) 
– Powered by rechargeable battery or AC power (via USB port) 
– Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go 
– Includes a stand for attaching to the thread on the back of the device 
– Features an internal memory for storing up to 5000 data sets 
– Saved data is stamped with the time and date 
– Takes measurements even while the battery is charging 
– Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes 
– Programmable alarm and automatic power-off battery-saving functionality&nbsp;

Extech

ACISION

Center

TRIPLETT

MEGGER

AMPROBE

Piecal

Multimeters

Other Measuring Tools

Electrical Power Testing

Clamp Meters

Industrial Thermometer

Humidity & Temperature

Sound & Vibration Meters

Thermal Imaging Cameras

Multimeter Leads

Light Meters & Imaging

CETM

Pce Instruments PCE-MPC 10 Air Quality Particle Counting Meter

pce instruments pce-mpc 10 air quality particle counting meter alat pengukur partikel kualitas udara dari meters instrumen kira zarah kualiti instruments/四氯乙烯仪器 空气质量粒子计数器 空气质量计 四氯乙烯仪器

pce-instruments-pce-mpc-10-air-quality-particle-counting-meter

BGX 4-Groove Even Load Design
The 4 rows of steel balls forms 45 degree contact with the grooves at 4 positions will balance the loads form all direction. This design that permits even load capacity in all directions no matter how the rails are mounted is widely adopted in all types of machines. Compared with the 2-groove Gothic design, the 4-groove construction is of better rigidity, accuracy and life. In particular, the auto-adjust capability allows quick accurate linear motions by eliminating the deviation of the mounting planes and the assembly errors.

BGX Seal Design
Incursion of foreign objects is normally the major reason of life shortening for rails because the accuracy of linear guides relies very much on circulation of the steel ball between the slide and the rail. Even the incursion of smallest objects can cause skipping and bumping of the slide and lead to permanent damage. Therefore, seal design is the key to linear slide quality. The seal design in BGX linear guides is divided into top and bottom seal systems aiming at the incursion passage of the foreign objects.

BGX Oil Retaining in Circulation System
BGX circulation system reserves a lot of space for retaining oil and is able to keeps a lot more oil. When linear slide moves, the oil inside spreads all over the prolongs the life

BGX 4-Groove Even Load Design The 4 rows of steel balls forms 45 degree contact with the grooves at 4 positions will balance the loads form all direction. This design that permits even load capacity in all directions no matter how the rails are mounted is widely adopted in all types of machines. Compared with the 2-groove Gothic design, the 4-groove construction is of better rigidity, accuracy and life. In particular, the auto-adjust capability allows quick accurate linear motions by eliminating the deviation of the mounting planes and the assembly errors.BGX Seal Design Incursion of foreign objects is normally the major reason of life shortening for rails because the accuracy of linear guides relies very much on circulation of the steel ball between the slide and the rail. Even the incursion of smallest objects can cause skipping and bumping of the slide and lead to permanent damage. Therefore, seal design is the key to linear slide quality. The seal design in BGX linear guides is divided into top and bottom seal systems aiming at the incursion passage of the foreign objects.BGX Oil Retaining in Circulation System BGX circulation system reserves a lot of space for retaining oil and is able to keeps a lot more oil. When linear slide moves, the oil inside spreads all over the prolongs the life

BGX 4-Groove Even Load Design 
The 4 rows of steel balls forms 45 degree contact with the grooves at 4 positions will balance the loads form all direction. This design that permits even load capacity in all directions no matter how the rails are mounted is widely adopted in all types of machines. Compared with the 2-groove Gothic design, the 4-groove construction is of better rigidity, accuracy and life. In particular, the auto-adjust capability allows quick accurate linear motions by eliminating the deviation of the mounting planes and the assembly errors.
BGX Seal Design 
Incursion of foreign objects is normally the major reason of life shortening for rails because the accuracy of linear guides relies very much on circulation of the steel ball between the slide and the rail. Even the incursion of smallest objects can cause skipping and bumping of the slide and lead to permanent damage. Therefore, seal design is the key to linear slide quality. The seal design in BGX linear guides is divided into top and bottom seal systems aiming at the incursion passage of the foreign objects.
BGX Oil Retaining in Circulation System 
BGX circulation system reserves a lot of space for retaining oil and is able to keeps a lot more oil. When linear slide moves, the oil inside spreads all over the prolongs the life

STAF LINEAR GUIDE CAT

Grace Tan

Others

Other Machines

Grace

Staf Bgxh Linear Guides Size 20

staf bgxh linear guides size 20 panduan ukuran machinery accessories aksesoris mesin petunjuk saiz aksesori jentera bgxh直线导轨尺寸20 机械配件 斯塔夫

staf-bgxh-linear-guides-size-20

BGXH-20.BE-N-Z0-STAF

BGXH-20.BN-N-Z0-STAF

BGXH-20.BL-N-Z0-STAF

BGXH-20.FE-N-N-Z0-STAF

BGXH-20.FL-N-Z0-STAF

BGXH-20.FN-N-Z0-STAF

NON CAGED TYPE BGX SERIES SIZE 20

BGR-20-4000MM

BGR-20-1000MM

BGR-20-2000MM

BGR-20-3000MM

RAIL

9)Side knitted fabric 180g+1cm quilting foam

Tickness:25cmmattress structure as below:1)White knitted fabric 220g(OEKO-TEX)2)Polyester 100g3)1.5cm quilting foam4)2cm quilting foam4non-woven fabric5)cotton pad 200g6)22cm pocket spring wire 2.37)cotton pad 200g8)Botton-non woven fabric 9)Side knitted fabric 180g+1cm quilting foam

Tickness:25cm
mattress structure as below:
1)White knitted fabric 220g(OEKO-TEX)
2)Polyester 100g
3)1.5cm quilting foam
4)2cm quilting foam
4non-woven fabric
5)cotton pad 200g
6)22cm pocket spring wire 2.3
7)cotton pad 200g
8)Botton-non woven fabric&nbsp;
9)Side knitted fabric 180g+1cm quilting foam

DAVID

RECO

COCO

WARNOCK

BOEN

BEllA

BONNY

ASTON

LINKEDIN

Office Furniture

Outdoor Furniture

Engine Oil & Fluid

Rapid test kits (COVID)

Other Consumables Products

Rehab, Home Care & Medical Equipment

Storage Boxes & Container 

Packaging & Shipping Supplies

Safety Gloves

LYU PENGCHONG

Hybird Mattress Customize Any Size

hybird mattress customize size kasur sesuaikan ukuran apapun general furniture perabotan umum panda collections tilam sebarang saiz perabot oem/oem代工 混合床垫定制任何尺寸 通用家具 熊猫收藏