FLUKE

Pomona

RS Pro

Electricals

electricals

Electrical Cable

electrical-cable

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Multimeter Leads

multimeter-leads

Test Probes

test-probes

Fluke TL76 Test Lead Kit, Cat Iii, Cat Iv, 10A

Connector Type	Banana Plug, Shrouded 4 mm

Safety Category	CAT III 1000 V, CAT IV 600V

 Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Multimeter Leads, Removable IC Caps, 90° Angle Plug - TL76

Measure voltage, current, and electrical resistance like a pro with FLUKE's all-in-one SureGrip multimeter leads. As this accessory is rated for CAT II 1000V specifications at 10A, it makes quick work of general circuit testing. For circuits with CAT III 1000V or CAT IV 600V safety requirements, just pop on the protective cap, and you're good to go. The supplied lantern tips make examining 4mm European wall sockets a cinch, and can be removed for easy access to terminal blocks.

• Red and black cables let you differentiate leads clearly at a glance
• Insulated IC caps for probing closely spaced leads with accuracy
• Lead length of 1.5m gives you plenty of room to manoeuvre


• Electrical testing and development
• Energy industry
• Telecommunications equipment
• Manufacturing facilities
 

<h3 class="md-block-header-three">Fluke TL76 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li>Lead Type	Test Lead Kit</li><li>Connector Type	Banana Plug, Shrouded 4 mm</li><li>Lead Length	1.5m</li><li>Current Rating	10A</li><li>Safety Category Voltage	600 V, 1000V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul> Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, Removable IC Caps, 90° Angle Plug - TL76Measure voltage, current, and electrical resistance like a pro with FLUKE&#x27;s all-in-one SureGrip multimeter leads. As this accessory is rated for CAT II 1000V specifications at 10A, it makes quick work of general circuit testing. For circuits with CAT III 1000V or CAT IV 600V safety requirements, just pop on the protective cap, and you&#x27;re good to go. The supplied lantern tips make examining 4mm European wall sockets a cinch, and can be removed for easy access to terminal blocks.Features &amp; Benefits• Red and black cables let you differentiate leads clearly at a glance • Insulated IC caps for probing closely spaced leads with accuracy • Lead length of 1.5m gives you plenty of room to manoeuvre Applications• Electrical testing and development • Energy industry • Telecommunications equipment • Manufacturing facilities

<h3>Fluke TL76 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>Lead Type	Test Lead Kit</li>
<li>Connector Type	Banana Plug, Shrouded 4 mm</li>
<li>Lead Length	1.5m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	600 V, 1000V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
&nbsp;Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, Removable IC Caps, 90° Angle Plug - TL76
Measure voltage, current, and electrical resistance like a pro with FLUKE's all-in-one SureGrip multimeter leads. As this accessory is rated for CAT II 1000V specifications at 10A, it makes quick work of general circuit testing. For circuits with CAT III 1000V or CAT IV 600V safety requirements, just pop on the protective cap, and you're good to go. The supplied lantern tips make examining 4mm European wall sockets a cinch, and can be removed for easy access to terminal blocks.
Features &amp; Benefits
• Red and black cables let you differentiate leads clearly at a glance 
• Insulated IC caps for probing closely spaced leads with accuracy 
• Lead length of 1.5m gives you plenty of room to manoeuvre 

Applications
• Electrical testing and development 
• Energy industry 
• Telecommunications equipment 
• Manufacturing facilities 
&nbsp;

Fluke Accessories

Datasheet - TL76

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke tl76 test lead kit, cat iii, iv, 10a kit kabel uji tl76, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl76-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A

FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1

When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you'll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they're widely compatible with your existing devices.

• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots
• Nickel-plated jaws resist corrosion, so deliver a long service life
• Sharp 12mm stainless steel tip provides reliable contact for results you can rely on
• Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial use

• Factory automation
• Heavy industrial equipment
• Automotive servicing 

<h3 class="md-block-header-three">Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Industrial Test Lead Kit</li><li>Connector Type	Straight to Right Angle</li><li>Lead Length	1.6m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you&#x27;ll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they&#x27;re widely compatible with your existing devices.Features &amp; Benefits• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots • Nickel-plated jaws resist corrosion, so deliver a long service life • Sharp 12mm stainless steel tip provides reliable contact for results you can rely on • Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial useApplications• Factory automation • Heavy industrial equipment • Automotive servicing

<h3>Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Industrial Test Lead Kit</li>
<li>Connector Type	Straight to Right Angle</li>
<li>Lead Length	1.6m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1
When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you'll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they're widely compatible with your existing devices.
Features &amp; Benefits
• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots 
• Nickel-plated jaws resist corrosion, so deliver a long service life 
• Sharp 12mm stainless steel tip provides reliable contact for results you can rely on 
• Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial use
Applications
• Factory automation 
• Heavy industrial equipment 
• Automotive servicing&nbsp;

SureGrip TL220 industrial test lead kit

Datasheet - TL220-1

fluke tl220-1 industrial test lead kit, cat iii, iv, 10a kit kabel uji industri tl220-1, multimeter leads utama ujian perindustrian fluke/福禄克 工业测试引线套件，cat iii、cat iv，10a 福禄克

fluke-tl220-1-industrial-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A

• Various series, including TL910, TL224 and 80BK (probe)
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910

Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.

• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life
• Long 1m cable lets you comfortably test items in arm's reach without tugging at the multimeter
• Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibility

• Electrical engineering
• Energy sector
• Telecommunications systems
• Manufacturing facilities
 

<h3 class="md-block-header-three">Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Electronic Test Lead Kit</li><li>Product Type	Test Probe</li><li>Connector Type	Spring Loaded Pin</li><li>Lead Length	1m</li><li>Current Rating	3A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Various series, including TL910, TL224 and 80BK (probe) • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.Features &amp; Benefits• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life • Long 1m cable lets you comfortably test items in arm&#x27;s reach without tugging at the multimeter • Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibilityApplications• Electrical engineering • Energy sector • Telecommunications systems • Manufacturing facilities

<h3>Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A</h3>
<ul>
<li>&nbsp;Lead Type	Electronic Test Lead Kit</li>
<li>Product Type	Test Probe</li>
<li>Connector Type	Spring Loaded Pin</li>
<li>Lead Length	1m</li>
<li>Current Rating	3A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Various series, including TL910, TL224 and 80BK (probe) 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910
Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.
Features &amp; Benefits
• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life 
• Long 1m cable lets you comfortably test items in arm's reach without tugging at the multimeter 
• Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibility
Applications
• Electrical engineering 
• Energy sector 
• Telecommunications systems 
• Manufacturing facilities 
&nbsp;

Fluke TL910 Electronic Test Probes with Replacement Tips

Datasheet - TL910

fluke tl910 electronic test lead kit, cat iii, iv, 3a kit kabel uji elektronik tl910, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 电子测试引线套件，cat iii、cat iv，3a 电力测试 福禄克

fluke-tl910-electronic-test-lead-kit-cat-iii-cat-iv-3a

Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A

FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1

Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.

• PVC insulator is abrasion-resistant for a long service life
• Generous 1.22m cable length gives you plenty of room to manoeuvre
• Comfort-grip probe handle makes it easy to use
• Shrouded plugs minimise the chances of accidental contact for maximum user safety

• Electrical installations
• Industrial circuit breakers
• Distribution wiring 

<h3 class="md-block-header-three">Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Connector Type	Banana Plug</li><li>Lead Length	1.22m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it&#x27;s an all-in-one measurement solution that saves time and effort in the field. Because it&#x27;s rated for CAT III, it&#x27;s a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it&#x27;s widely compatible with your existing devices for ease of use.Features &amp; Benefits• PVC insulator is abrasion-resistant for a long service life • Generous 1.22m cable length gives you plenty of room to manoeuvre • Comfort-grip probe handle makes it easy to use • Shrouded plugs minimise the chances of accidental contact for maximum user safetyApplications• Electrical installations • Industrial circuit breakers • Distribution wiring

<h3>Fluke TL75-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Connector Type	Banana Plug</li>
<li>Lead Length	1.22m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, PVC Insulation Type, 1.22m Lead Length - TL75-1
Need to connect a high-precision probe to your multimeter? Count on this test lead kit from FLUKE. With a sturdy 4mm plug on one end and a PVC-insulated probe on the other, it's an all-in-one measurement solution that saves time and effort in the field. Because it's rated for CAT III, it's a safe choice for general-purpose measurements in a heavy-industrial environment. A right-angled connector reduces strain to help keep this hardy gadget running at peak condition for longer. Thanks to its standard banana plug design, it's widely compatible with your existing devices for ease of use.
Features &amp; Benefits
• PVC insulator is abrasion-resistant for a long service life 
• Generous 1.22m cable length gives you plenty of room to manoeuvre 
• Comfort-grip probe handle makes it easy to use 
• Shrouded plugs minimise the chances of accidental contact for maximum user safety
Applications
• Electrical installations 
• Industrial circuit breakers 
• Distribution wiring&nbsp;

TL75 PVC insul hard point test lead set

fluke tl75-1 test lead kit, cat iii, iv, 10a kit kabel uji tl75-1, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl75-1-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL71-1 Test Lead Kit, Cat Iii, Cat Iv, 10A

FLUKE Multimeter Leads, Shrouded Plug Connector Type, 10A Current Rating - TL71-1

Get the most from your multimeter with this test lead set from FLUKE. It connects high-precision 2mm probes to your measuring device. This lets you measure voltage, current or electrical resistance to a high degree of accuracy, so it's a dependable choice for μV measurements. Thanks to their hardy silicone insulator, these flexible cables can handle extremes of temperature, so they won't lose their cool when the heat is on. WearGuard technology adds another level of safety by exposing a contrasting colour when the leads are damaged, so you can rest assured your multimeter will deliver reliable results every time.

• Ergonomic probe design offers a comfortable grip
• 1.5m length means you can reach hard-to-access spots
• Right-angled plugs help reduce strain on your connectors for a long service life

• Electrical engineering
• Automotive servicing
• Manufacturing industry 

<h3 class="md-block-header-three">Fluke TL71-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li>Lead Type	Test Lead Kit</li><li>Connector Type	Right Angle</li><li>Lead Length	1.5m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000V</li><li>Safety Category	CATII 1000V</li><li>Safety Category Level	CAT III, CAT IV</li></ul> Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, Shrouded Plug Connector Type, 10A Current Rating - TL71-1Get the most from your multimeter with this test lead set from FLUKE. It connects high-precision 2mm probes to your measuring device. This lets you measure voltage, current or electrical resistance to a high degree of accuracy, so it&#x27;s a dependable choice for μV measurements. Thanks to their hardy silicone insulator, these flexible cables can handle extremes of temperature, so they won&#x27;t lose their cool when the heat is on. WearGuard technology adds another level of safety by exposing a contrasting colour when the leads are damaged, so you can rest assured your multimeter will deliver reliable results every time.Features &amp; Benefits• Ergonomic probe design offers a comfortable grip • 1.5m length means you can reach hard-to-access spots • Right-angled plugs help reduce strain on your connectors for a long service lifeApplications• Electrical engineering • Automotive servicing • Manufacturing industry

<h3>Fluke TL71-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>Lead Type	Test Lead Kit</li>
<li>Connector Type	Right Angle</li>
<li>Lead Length	1.5m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000V</li>
<li>Safety Category	CATII 1000V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
&nbsp;Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, Shrouded Plug Connector Type, 10A Current Rating - TL71-1
Get the most from your multimeter with this test lead set from FLUKE. It connects high-precision 2mm probes to your measuring device. This lets you measure voltage, current or electrical resistance to a high degree of accuracy, so it's a dependable choice for μV measurements. Thanks to their hardy silicone insulator, these flexible cables can handle extremes of temperature, so they won't lose their cool when the heat is on. WearGuard technology adds another level of safety by exposing a contrasting colour when the leads are damaged, so you can rest assured your multimeter will deliver reliable results every time.
Features &amp; Benefits
• Ergonomic probe design offers a comfortable grip 
• 1.5m length means you can reach hard-to-access spots 
• Right-angled plugs help reduce strain on your connectors for a long service life
Applications
• Electrical engineering 
• Automotive servicing 
• Manufacturing industry&nbsp;

TL71-1 premium test lead set

fluke tl71-1 test lead kit, cat iii, iv, 10a kit kabel uji tl71-1, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl71-1-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL223-1 Electrical Test Lead Kit, Cat Iii, Cat Iv

 Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.


• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires


These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.


Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.


TL223-1 - Fluke SureGrip Electrical Test Lead Kit

Includes AC220 SureGrip Alligator Clip Set, TP1 Slim-Reach Test Probes (Flat Bladed), TL224 SureGrip Silicone Test Lead Set (straight to right).


• Lead length of 1.5m offers plenty of reach to get into challenging areas
• Silicone construction resists mechanical stress, corrosion and abrasion for long-term performance
• Right-angled ends provide strain relief


• Electrical distribution boards
• Industrial power supplies
• Radio repairs
• Factory automation


Can I use these multimeter leads in harsh settings?

Yes, the cables perform reliably in a wide temperature range between -20°C and +55°C, so they're ideal for use in demanding industrial conditions.


<h3 class="md-block-header-three">Fluke TL223-1 Electrical Test Lead Kit, Cat Iii, Cat Iv</h3> Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. <h3 class="md-block-header-three">Features and Benefits</h3>• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wires <h3 class="md-block-header-three">What are test leads?</h3>These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. <h3 class="md-block-header-three">What are test probes?</h3>Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. <h3 class="md-block-header-three">TL223-1 - Fluke SureGrip Electrical Test Lead Kit</h3>Includes AC220 SureGrip Alligator Clip Set, TP1 Slim-Reach Test Probes (Flat Bladed), TL224 SureGrip Silicone Test Lead Set (straight to right). <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Lead length of 1.5m offers plenty of reach to get into challenging areas • Silicone construction resists mechanical stress, corrosion and abrasion for long-term performance • Right-angled ends provide strain relief <h3 class="md-block-header-three">Applications</h3>• Electrical distribution boards • Industrial power supplies • Radio repairs • Factory automation <h3 class="md-block-header-three">Can I use these multimeter leads in harsh settings?</h3>Yes, the cables perform reliably in a wide temperature range between -20°C and +55°C, so they&#x27;re ideal for use in demanding industrial conditions. <h3 class="md-block-header-three">Standards</h3>1000 V CAT III, 600 V CAT IV

<h3>Fluke TL223-1 Electrical Test Lead Kit, Cat Iii, Cat Iv</h3>
&nbsp;Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories. 

<h3>Features and Benefits</h3>
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires 

<h3>What are test leads?</h3>
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. 

<h3>What are test probes?</h3>
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. 

<h3>TL223-1 - Fluke SureGrip Electrical Test Lead Kit</h3>
Includes AC220 SureGrip Alligator Clip Set, TP1 Slim-Reach Test Probes (Flat Bladed), TL224 SureGrip Silicone Test Lead Set (straight to right). 

<h3>Features &amp; Benefits</h3>
• Lead length of 1.5m offers plenty of reach to get into challenging areas 
• Silicone construction resists mechanical stress, corrosion and abrasion for long-term performance 
• Right-angled ends provide strain relief 

<h3>Applications</h3>
• Electrical distribution boards 
• Industrial power supplies 
• Radio repairs 
• Factory automation 

<h3>Can I use these multimeter leads in harsh settings?</h3>
Yes, the cables perform reliably in a wide temperature range between -20°C and +55°C, so they're ideal for use in demanding industrial conditions. 

<h3>Standards</h3>
1000 V CAT III, 600 V CAT IV&nbsp;

fluke tl223-1 electrical test lead kit, cat iii, iv kit kabel uji listrik tl223-1, power testing pengujian daya plumbum ujian elektrik tenaga fluke/福禄克 电气测试引线套件，cat iii、cat 电力测试 福禄克

fluke-tl223-1-electrical-test-lead-kit-cat-iii-cat-iv

Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A

Each test lead covered by two layers of silicone insulation
Extra-heavy strain relief on probe-end and plug-end
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Probes always show correct category rating for tip being used
Environmental ratings -20°C to +55°C
Conforms to safety standard EN61010-031: 2008

One pair (red, black) Fluke TL175 TwistGuard™ Test Leads
Exposed probe tip length from 19mm to 4mm

FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175

Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.

• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind

• Household outlets
• Switch testing
• Manufacturing facilities
• Automotive industry
 

<h3 class="md-block-header-three">Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Product Type	Test leads</li><li>Connector Type	Shrouded</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features &amp; BenefitsEach test lead covered by two layers of silicone insulation Extra-heavy strain relief on probe-end and plug-end Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings -20°C to +55°C Conforms to safety standard EN61010-031: 2008What are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.Supplied withOne pair (red, black) Fluke TL175 TwistGuard™ Test Leads Exposed probe tip length from 19mm to 4mmFLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.Features &amp; Benefits• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it&#x27;s a versatile piece of kit • CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety • Double silicone insulation is resistant to oil and solvent damage, for a longer service life • Probes always display the correct category rating for the tip exposure used, giving you added peace of mindApplications• Household outlets • Switch testing • Manufacturing facilities • Automotive industry

<h3>Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Product Type	Test leads</li>
<li>Connector Type	Shrouded</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features &amp; Benefits
Each test lead covered by two layers of silicone insulation 
Extra-heavy strain relief on probe-end and plug-end 
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs 
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 
Probes always show correct category rating for tip being used 
Environmental ratings -20°C to +55°C 
Conforms to safety standard EN61010-031: 2008
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
Supplied with
One pair (red, black) Fluke TL175 TwistGuard™ Test Leads 
Exposed probe tip length from 19mm to 4mm
FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175
Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.
Features &amp; Benefits
• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit 
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety 
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life 
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind
Applications
• Household outlets 
• Switch testing 
• Manufacturing facilities 
• Automotive industry 
&nbsp;

TL175 Data Sheet

Instruction Sheet - TL175

fluke tl175 test lead kit, cat iii, iv, 10a kit kabel uji tl175, electrical power testing pengujian daya listrik petunjuk ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl175-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL224 Silicone Test Lead Set, Cat Iii, Cat Iv, 10A

FLUKE Multimeter Leads, Banana Plug Type, 10A Current Rating - TL224

Looking for easy reach when carrying out electrical measurements? Choose these multimeter leads from FLUKE. At 1.5m long, they give you room to manoeuvre when you need to take readings from equipment that's tough to access. The silicone housing material protects the structure of the cables while keeping them flexible, so they suffer less wear and tear. Banana plugs snap into place by hand for quick and easy installation. They also provide a secure connection, so you won't experience unexpected slip-ups. A red and black colour scheme helps you differentiate between wires at a glance.

• Right-angle terminals provide high strain relief for durability and a long service life
• SureGrip design ensures a comfortable user experience
• Cable insulation prevents thermal energy from affecting performance
• CAT III 1000V and CAT IV 600V safety standard ratings indicate suitability for use in high-power applications

• Construction industry
• Power supplies
• Electrical engineering 

<h3 class="md-block-header-three">Fluke TL224 Silicone Test Lead Set, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Silicone Test Lead Set</li><li>Connector Type	Banana Plug</li><li>Lead Length	1.5m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Various series, including TL910, TL224 and 80BK (probe) • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, Banana Plug Type, 10A Current Rating - TL224Looking for easy reach when carrying out electrical measurements? Choose these multimeter leads from FLUKE. At 1.5m long, they give you room to manoeuvre when you need to take readings from equipment that&#x27;s tough to access. The silicone housing material protects the structure of the cables while keeping them flexible, so they suffer less wear and tear. Banana plugs snap into place by hand for quick and easy installation. They also provide a secure connection, so you won&#x27;t experience unexpected slip-ups. A red and black colour scheme helps you differentiate between wires at a glance.Features &amp; Benefits• Right-angle terminals provide high strain relief for durability and a long service life • SureGrip design ensures a comfortable user experience • Cable insulation prevents thermal energy from affecting performance • CAT III 1000V and CAT IV 600V safety standard ratings indicate suitability for use in high-power applicationsApplications• Construction industry • Power supplies • Electrical engineering

<h3>Fluke TL224 Silicone Test Lead Set, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Silicone Test Lead Set</li>
<li>Connector Type	Banana Plug</li>
<li>Lead Length	1.5m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Various series, including TL910, TL224 and 80BK (probe) 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, Banana Plug Type, 10A Current Rating - TL224
Looking for easy reach when carrying out electrical measurements? Choose these multimeter leads from FLUKE. At 1.5m long, they give you room to manoeuvre when you need to take readings from equipment that's tough to access. The silicone housing material protects the structure of the cables while keeping them flexible, so they suffer less wear and tear. Banana plugs snap into place by hand for quick and easy installation. They also provide a secure connection, so you won't experience unexpected slip-ups. A red and black colour scheme helps you differentiate between wires at a glance.
Features &amp; Benefits
• Right-angle terminals provide high strain relief for durability and a long service life 
• SureGrip design ensures a comfortable user experience 
• Cable insulation prevents thermal energy from affecting performance 
• CAT III 1000V and CAT IV 600V safety standard ratings indicate suitability for use in high-power applications
Applications
• Construction industry 
• Power supplies 
• Electrical engineering&nbsp;

TL224 SureGripTM Silicone Test Leads (straight to right)

Datasheet - TL224

fluke tl224 silicone test lead set, cat iii, iv, 10a set kabel uji silikon tl224, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 硅胶测试线组，cat iii，cat iv，10a 电力测试 福禄克

fluke-tl224-silicone-test-lead-set-cat-iii-cat-iv-10a

RS PRO Datasheet

Siemens

STANLEY

DEUTSCH

Facom

RAPID

ECLIPSE TOOLS

Plugs & Connector 

Button Switch

Aluminium Capacitors

Rs Pro 2432998 Test Lead Kit, Crocodile Clip, Right Angle Plug, 1.2m, Cat Iii, 10A

rs pro 2432998 test lead kit, crocodile clip, right angle plug, 1.2m, cat iii, 10a kit timbal uji 2432998, klip buaya, steker sudut kanan, 1,2m, multimeter leads plumbum ujian, palam 测试引线套件，鳄鱼夹，直角插头，1.2m，cat iii，10a rs专业版

rs-pro-2432998-test-lead-kit-crocodile-clip-right-angle-plug-1-2m-cat-iii-10a

Fluke TL1500DC Insulated Test Lead Set, Cat Ii, Cat Iii, Cat Iv, 10A

 
Need to check your system's energy flow? Have the right kit to hand with these multimeter test leads from FLUKE. When connected to your meter, they precisely measure a setup's voltage to give you close power monitoring. By tracking voltages up to 1,500V DC, the probes handle large loads in demanding systems. Getting set up is no problem, thanks to the standard shrouded banana plug connectors. Handy double-layer insulation means the leads stand up to sudden surges, keeping you clear of hazards.


• Lead grips labelled with voltage and current limits for easy reference
• Includes two covering caps to provide extra protection against hazardous loads
• Colour-coded leads match meter ports to cut the risk of incorrect set-up
• Cable length of 1m for flexibility during testing
• Wide temperature range between -10°C and +50°C for reliable performance in tough conditions


• R&D labs
• Renewable energy installations
• Lighting systems


Can I use these multimeter leads to test moving equipment?

Yes, these products come with durable PVC sheaths, giving them the effective abrasion resistance they need to work safely around moving gear.
 

<h3 class="md-block-header-three">Fluke TL1500DC Insulated Test Lead Set, Cat Ii, Cat Iii, Cat Iv, 10A</h3> Need to check your system&#x27;s energy flow? Have the right kit to hand with these multimeter test leads from FLUKE. When connected to your meter, they precisely measure a setup&#x27;s voltage to give you close power monitoring. By tracking voltages up to 1,500V DC, the probes handle large loads in demanding systems. Getting set up is no problem, thanks to the standard shrouded banana plug connectors. Handy double-layer insulation means the leads stand up to sudden surges, keeping you clear of hazards. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Lead grips labelled with voltage and current limits for easy reference • Includes two covering caps to provide extra protection against hazardous loads • Colour-coded leads match meter ports to cut the risk of incorrect set-up • Cable length of 1m for flexibility during testing • Wide temperature range between -10°C and +50°C for reliable performance in tough conditions <h3 class="md-block-header-three">Applications</h3>• R&amp;D labs • Renewable energy installations • Lighting systems <h3 class="md-block-header-three">Can I use these multimeter leads to test moving equipment?</h3>Yes, these products come with durable PVC sheaths, giving them the effective abrasion resistance they need to work safely around moving gear.

<h3>Fluke TL1500DC Insulated Test Lead Set, Cat Ii, Cat Iii, Cat Iv, 10A</h3>
&nbsp; 
Need to check your system's energy flow? Have the right kit to hand with these multimeter test leads from FLUKE. When connected to your meter, they precisely measure a setup's voltage to give you close power monitoring. By tracking voltages up to 1,500V DC, the probes handle large loads in demanding systems. Getting set up is no problem, thanks to the standard shrouded banana plug connectors. Handy double-layer insulation means the leads stand up to sudden surges, keeping you clear of hazards. 

<h3>Features &amp; Benefits</h3>
• Lead grips labelled with voltage and current limits for easy reference 
• Includes two covering caps to provide extra protection against hazardous loads 
• Colour-coded leads match meter ports to cut the risk of incorrect set-up 
• Cable length of 1m for flexibility during testing 
• Wide temperature range between -10°C and +50°C for reliable performance in tough conditions 

<h3>Applications</h3>
• R&amp;D labs 
• Renewable energy installations 
• Lighting systems 

<h3>Can I use these multimeter leads to test moving equipment?</h3>
Yes, these products come with durable PVC sheaths, giving them the effective abrasion resistance they need to work safely around moving gear. 
&nbsp;

fluke tl1500dc insulated test lead set, cat ii, iii, iv, 10a set kabel uji terisolasi tl1500dc, electrical power testing pengujian daya listrik plumbum ujian bertebat tenaga elektrik fluke/福禄克 绝缘测试线组，cat ii、cat iii、cat iv，10a 电力测试 福禄克

fluke-tl1500dc-insulated-test-lead-set-cat-ii-cat-iii-cat-iv-10a

Test Lead Kit with Crocodile Clips, 1000 V

Rs Pro 1253733 Test Lead Kit, Crocodile Clip, Right Angle Plug, 1.2m, Cat Iii, 15A

rs pro 1253733 test lead kit, crocodile clip, right angle plug, 1.2m, cat iii, 15a klip buaya, steker sudut kanan, 1,2m, multimeter leads kit plumbum ujian, palam 测试引线套件，鳄鱼夹，直角插头，1.2m，cat iii，15a rs专业版

rs-pro-1253733-test-lead-kit-crocodile-clip-right-angle-plug-1-2m-cat-iii-15a

The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. The TwistGuard™ adjustable tips enhance safety and versatility length. The WearGuard™ indicator shows damage to leads and provides heavy duty strain relief to withstand over 30,000 bends  

Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements

New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement

Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.

Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.

Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs

Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2

TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip

Probes always show correct category rating for tip being used

Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)

The adjustable tip shroud meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. The correct category rating for the tip exposure being used is always visible on the test leads. This makes the TL175 test leads suitable for use in many environments:

WearGuard™ lead wire wear indicator makes it easier to see insulation wear and tear. If the inner, white insulation layer shows through the outer, black layer, damage is indicated, and the leads must be replaced. The silicone insulation withstands high temperatures and remains flexible in cold temperatures. While the universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs 

Patented TwistGuard™ reduces tip exposure

New WearGuard™ silicone leads indicate when to replace leads

Heavy-duty strain relief tested to 30,000+ bends without failure

<h3 class="md-block-header-three">Fluke Tl-175 Twistguard Test Lead Kit</h3><ul class="md-block-unordered-list-item"><li>The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. The TwistGuard™ adjustable tips enhance safety and versatility length. The WearGuard™ indicator shows damage to leads and provides heavy duty strain relief to withstand over 30,000 bends </li><li>Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements</li><li>New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement</li><li>Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.</li><li>Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.</li><li>Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs</li><li>Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2</li><li>TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip</li><li>Probes always show correct category rating for tip being used</li><li>Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)</li><li>Conforms to EN61010-031</li></ul>The adjustable tip shroud meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. The correct category rating for the tip exposure being used is always visible on the test leads. This makes the TL175 test leads suitable for use in many environments:<ul class="md-block-unordered-list-item"><li>CAT II 1000 V</li><li>CAT III 1000 V</li><li>CAT IV 600 V</li></ul>Safety inside and outWearGuard™ lead wire wear indicator makes it easier to see insulation wear and tear. If the inner, white insulation layer shows through the outer, black layer, damage is indicated, and the leads must be replaced. The silicone insulation withstands high temperatures and remains flexible in cold temperatures. While the universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs <ul class="md-block-unordered-list-item"><li>Patented TwistGuard™ reduces tip exposure</li><li>New WearGuard™ silicone leads indicate when to replace leads</li><li>Heavy-duty strain relief tested to 30,000+ bends without failure</li></ul>

<h3>Fluke Tl-175 Twistguard Test Lead Kit</h3>
<ul>
<li>The Fluke TL175 TwistGuard™ Test Leads offer adjustable length test tips for use in different measurement environments. The TwistGuard™ adjustable tips enhance safety and versatility length. The WearGuard™ indicator shows damage to leads and provides heavy duty strain relief to withstand over 30,000 bends&nbsp;&nbsp;</li>
<li>Patented TwistGuard™ extendable tip shroud meets the highest electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements</li>
<li>New WearGuard™ lead wire wear indication. Each test lead is covered by two layers of silicone insulation; inner contrasting color is exposed when the leads are nicked, scuffed, or otherwise damaged and in need of replacement</li>
<li>Double insulated silicone leads. TL175 test leads withstand high temperatures and remain flexible in cold temperatures.</li>
<li>Extra-heavy duty strain relief on both probe-end and plug-end, tested beyond 30,000 bends without failure.</li>
<li>Universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs</li>
<li>Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2</li>
<li>TL175E also available. Includes removable 4 mm lantern tips that thread onto the lead tip</li>
<li>Probes always show correct category rating for tip being used</li>
<li>Environmental ratings: -20 °C to 55 °C (-4 °F to 131 °F), altitude: 2000 m (6,562 ft)</li>
<li>Conforms to EN61010-031</li>
</ul>
The adjustable tip shroud meets new electrical safety requirements to reduce tip exposure while providing the versatility needed for most measurements. The correct category rating for the tip exposure being used is always visible on the test leads. This makes the TL175 test leads suitable for use in many environments:
<ul>
<li>CAT II 1000 V</li>
<li>CAT III 1000 V</li>
<li>CAT IV 600 V</li>
</ul>
Safety inside and out
WearGuard™ lead wire wear indicator makes it easier to see insulation wear and tear. If the inner, white insulation layer shows through the outer, black layer, damage is indicated, and the leads must be replaced. The silicone insulation withstands high temperatures and remains flexible in cold temperatures. While the universal input plugs are compatible with all instruments that accept standard 4 mm shrouded banana plugs&nbsp;
<ul>
<li>Patented TwistGuard™ reduces tip exposure</li>
<li>New WearGuard™ silicone leads indicate when to replace leads</li>
<li>Heavy-duty strain relief tested to 30,000+ bends without failure</li>
</ul>

Fluke-TL175

Ratings

Exposed probe tip length

Environmental ratings

CETM

Fluke Tl-175 Twistguard Test Lead Kit

fluke tl-175 twistguard test lead kit timbal uji electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件 电力测试 福禄克

fluke-tl-175-twistguard-test-lead-kit

Fluke TL80A Basic Electronic Test Lead Kit

Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL80A Basic Electronic Test Lead Kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set which has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V. The TL80A comes with the C75 accessory case to easily store your test leads. 

<h3 class="md-block-header-three">Fluke TL80A Basic Electronic Test Lead Kit</h3>Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL80A Basic Electronic Test Lead Kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set which has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V. The TL80A comes with the C75 accessory case to easily store your test leads.

<h3>Fluke TL80A Basic Electronic Test Lead Kit</h3>
Test leads are an integral part of the complete measurement system and extend the capabilities of your digital multimeter. The TL80A Basic Electronic Test Lead Kit has the fundamental accessories for testing electronics. Includes the Fluke TL71 premium test lead set which has one pair of red and black comfort grip probes with flexible silicone-insulated, right-angle test leads. With distinctive comfort grip probes, they are heat and cold resistant with safety ratings up to CAT III 1000 V. The TL80A comes with the C75 accessory case to easily store your test leads.&nbsp;