FLUKE

Keysight

Lumberg Automation

SCHNEIDER ELECTRIC

Electricals

electricals

Circuit Breaker

circuit-breaker

Electrical Connectors

electrical-connectors

Circular Connectors

circular-connectors

Test & Measurement

test-measurement

Electrical Power Testing

electrical-power-testing

Circuit Breakers

circuit-breakers

Miniature Circuit Breakers - MCBs

miniature-circuit-breakers-mcbs

Power & Energy Meters

power-energy-meters

Fluke 1777 Three-Phase Power Quality Analyzers 

Number of Inputs: 4 inputs, 3 phases and neutral referenced to PE (5 connectors)

Measurement Category: 1000 V CAT III / 600 V CAT IV

Maximum Input Voltage: 1000 V rms / 1000 V dc (1700 Vpk)

Wye and Single Phase: Variable (50 V – 1000 V)

IEC 61000-4-30 Class A Compliance for Nominal Voltages (Vdin): 100 V – 690 V

Input Impedance: 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE

Bandwidth: DC to 30 kHz for PQ measurements, excluding transients

Scaling: 1:1, variable for use of potential transformers

Trigger: Adjustable trigger level. Triggers on high-frequency components > 1.5 kHz

Number of Inputs: 4 inputs, 3 phases and neutral, range selected automatically to attached sensor

DC: 20 A to 2000 A with 80i-2010-EL clamp

Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4

Scale Factor: Format: mx + b (gain and offset) user configurable

Displayed Units: User configurable (up to 8 characters, for example °C, psi, or m/s)

<h3 class="md-block-header-three">Fluke 1777 Three-Phase Power Quality Analyzers </h3>Voltage Inputs:<ul class="md-block-unordered-list-item"><li>Number of Inputs: 4 inputs, 3 phases and neutral referenced to PE (5 connectors)</li><li>Measurement Category: 1000 V CAT III / 600 V CAT IV</li><li>Maximum Input Voltage: 1000 V rms / 1000 V dc (1700 Vpk)</li><li>Nominal Voltage Range:</li><ul class="md-block-unordered-list-item"><li>Wye and Single Phase: Variable (50 V – 1000 V)</li><li>Delta: Variable (100 V – 1000 V)</li></ul><li>IEC 61000-4-30 Class A Compliance for Nominal Voltages (Vdin): 100 V – 690 V</li><li>Input Impedance: 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE</li><li>Bandwidth: DC to 30 kHz for PQ measurements, excluding transients</li><li>Resolution: 24-bit synchronous sampling</li><li>Sampling Frequency: 80 kS/s at 50/60 Hz</li><li>Scaling: 1:1, variable for use of potential transformers</li></ul>Voltage Transients:<ul class="md-block-unordered-list-item"><li>Measurement Range: ±8 kV</li><li>Sampling Rate:</li><ul class="md-block-unordered-list-item"><li>Model 1775: 1 MS/s</li><li>Model 1777: 1 MS/s, 20 MS/s</li></ul><li>Bandwidth: DC to 1 MHz</li><li>Trigger: Adjustable trigger level. Triggers on high-frequency components &gt; 1.5 kHz</li><li>Resolution: 14-bit synchronous sampling</li></ul>Current Inputs:<ul class="md-block-unordered-list-item"><li>Number of Inputs: 4 inputs, 3 phases and neutral, range selected automatically to attached sensor</li><li>Range:</li><ul class="md-block-unordered-list-item"><li>AC:</li><ul class="md-block-unordered-list-item"><li>1 A to 1500 A with i17XX-FLEX1500</li><li>3 A to 3000 A with i17XX-FLEX3000</li><li>6 A to 6000 A with i17XX-FLEX6000</li><li>40 mA to 40 A with clamp i40s-EL</li><li>4 A to 400 A with clamp i400s-EL</li></ul><li>DC: 20 A to 2000 A with 80i-2010-EL clamp</li></ul><li>Bandwidth: DC to 30 kHz</li><li>Resolution: 24-bit synchronous sampling</li><li>Sampling Frequency: 80 kS/s at 50/60 Hz</li><li>Scaling: 1:1, variable</li><li>Input Voltage:</li><ul class="md-block-unordered-list-item"><li>Clamp: 50 mV / 500 mV rms; CF 2.8</li><li>Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4</li><li>All at nominal probe range</li></ul><li>Input Impedance: 11 kΩ</li></ul>Aux Inputs:<ul class="md-block-unordered-list-item"><li>Wired Connection with 17XX-AUX adapter</li><li>Number of Inputs: 2</li><li>Input Range:</li><ul class="md-block-unordered-list-item"><li>Direct: 0 V dc to ± 10 V dc</li><li>0 V to 1000 V dc</li></ul><li>Input Impedance: Direct: 2.92 MΩ</li><li>Scale Factor: Format: mx + b (gain and offset) user configurable</li><li>Displayed Units: User configurable (up to 8 characters, for example °C, psi, or m/s)</li></ul>

<h3>Fluke 1777 Three-Phase Power Quality Analyzers&nbsp;</h3>
Voltage Inputs:
<ul>
<li>Number of Inputs: 4 inputs, 3 phases and neutral referenced to PE (5 connectors)</li>
<li>Measurement Category: 1000 V CAT III / 600 V CAT IV</li>
<li>Maximum Input Voltage: 1000 V rms / 1000 V dc (1700 Vpk)</li>
<li>Nominal Voltage Range:</li>
<ul>
<li>Wye and Single Phase: Variable (50 V – 1000 V)</li>
<li>Delta: Variable (100 V – 1000 V)</li>
</ul>
<li>IEC 61000-4-30 Class A Compliance for Nominal Voltages (Vdin): 100 V – 690 V</li>
<li>Input Impedance: 10 MΩ between P-P and P-N, 5 MΩ between P-PE and N-PE</li>
<li>Bandwidth: DC to 30 kHz for PQ measurements, excluding transients</li>
<li>Resolution: 24-bit synchronous sampling</li>
<li>Sampling Frequency: 80 kS/s at 50/60 Hz</li>
<li>Scaling: 1:1, variable for use of potential transformers</li>
</ul>
Voltage Transients:
<ul>
<li>Measurement Range: ±8 kV</li>
<li>Sampling Rate:</li>
<ul>
<li>Model 1775: 1 MS/s</li>
<li>Model 1777: 1 MS/s, 20 MS/s</li>
</ul>
<li>Bandwidth: DC to 1 MHz</li>
<li>Trigger: Adjustable trigger level. Triggers on high-frequency components &gt; 1.5 kHz</li>
<li>Resolution: 14-bit synchronous sampling</li>
</ul>
Current Inputs:
<ul>
<li>Number of Inputs: 4 inputs, 3 phases and neutral, range selected automatically to attached sensor</li>
<li>Range:</li>
<ul>
<li>AC:</li>
<ul>
<li>1 A to 1500 A with i17XX-FLEX1500</li>
<li>3 A to 3000 A with i17XX-FLEX3000</li>
<li>6 A to 6000 A with i17XX-FLEX6000</li>
<li>40 mA to 40 A with clamp i40s-EL</li>
<li>4 A to 400 A with clamp i400s-EL</li>
</ul>
<li>DC: 20 A to 2000 A with 80i-2010-EL clamp</li>
</ul>
<li>Bandwidth: DC to 30 kHz</li>
<li>Resolution: 24-bit synchronous sampling</li>
<li>Sampling Frequency: 80 kS/s at 50/60 Hz</li>
<li>Scaling: 1:1, variable</li>
<li>Input Voltage:</li>
<ul>
<li>Clamp: 50 mV / 500 mV rms; CF 2.8</li>
<li>Rogowski Coil: 15 mV / 150 mV rms at 50 Hz, 18 mV / 180 mV rms at 60 Hz; CF 4</li>
<li>All at nominal probe range</li>
</ul>
<li>Input Impedance: 11 kΩ</li>
</ul>
Aux Inputs:
<ul>
<li>Wired Connection with 17XX-AUX adapter</li>
<li>Number of Inputs: 2</li>
<li>Input Range:</li>
<ul>
<li>Direct: 0 V dc to ± 10 V dc</li>
<li>0 V to 1000 V dc</li>
</ul>
<li>Input Impedance: Direct: 2.92 MΩ</li>
<li>Scale Factor: Format: mx + b (gain and offset) user configurable</li>
<li>Displayed Units: User configurable (up to 8 characters, for example °C, psi, or m/s)</li>
</ul>

Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Fluke Networks

Multimeters

Other Measuring Tools

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

Fluke 1777 Three-Phase Power Quality Analyzers

fluke 1777 three-phase power quality analyzers penganalisis kualitas daya tiga fasa energy meters kualiti kuasa fluke/福禄克 三相电能质量分析仪 福禄克

fluke-1777-three-phase-power-quality-analyzers

Keysight Technologies B2911B Series Source Meter, 100 Nv → 210 V, 1-Channel, 31.8 W Output

The Keysight B2900B / BL Series Precision Source/Measure Units are compact and cost-effective bench-top Source/Measure Units (SMUs) with the capability to source and measure both voltage and current. These capabilities make the B2900B / BL Series SMU ideal for a wide variety of IV (current versus voltage) measurement tasks that require both high resolution and accuracy. It has a voltage maximum of ±210 V, a current maximum ± 3 A DC, and ±10.5 A pulsed sourcing capabilities. With a precision minimum of 10 fA / 100 nV sourcing and measuring resolution, a colour LCD graphical user interface (GUI) and several task-based viewing modes will improve your productivity for test, debug, and characterization.

Integrated 4-quadrant sourcing and measuring capabilities
Measurement range: ±210 V, ±3 A (DC), ±10.5 A (pulsed)
Source and measurement resolution down to 10 fA and 100 nV
10 microsecond digitizing capability

<h3 class="md-block-header-three">Keysight Technologies B2911B Series Source Meter, 100 Nv → 210 V, 1-Channel, 31.8 W Output</h3>The Keysight B2900B / BL Series Precision Source/Measure Units are compact and cost-effective bench-top Source/Measure Units (SMUs) with the capability to source and measure both voltage and current. These capabilities make the B2900B / BL Series SMU ideal for a wide variety of IV (current versus voltage) measurement tasks that require both high resolution and accuracy. It has a voltage maximum of ±210 V, a current maximum ± 3 A DC, and ±10.5 A pulsed sourcing capabilities. With a precision minimum of 10 fA / 100 nV sourcing and measuring resolution, a colour LCD graphical user interface (GUI) and several task-based viewing modes will improve your productivity for test, debug, and characterization.Integrated 4-quadrant sourcing and measuring capabilities Measurement range: ±210 V, ±3 A (DC), ±10.5 A (pulsed) Source and measurement resolution down to 10 fA and 100 nV 10 microsecond digitizing capability

<h3>Keysight Technologies B2911B Series Source Meter, 100 Nv → 210 V, 1-Channel, 31.8 W Output</h3>
The Keysight B2900B / BL Series Precision Source/Measure Units are compact and cost-effective bench-top Source/Measure Units (SMUs) with the capability to source and measure both voltage and current. These capabilities make the B2900B / BL Series SMU ideal for a wide variety of IV (current versus voltage) measurement tasks that require both high resolution and accuracy. It has a voltage maximum of ±210 V, a current maximum ± 3 A DC, and ±10.5 A pulsed sourcing capabilities. With a precision minimum of 10 fA / 100 nV sourcing and measuring resolution, a colour LCD graphical user interface (GUI) and several task-based viewing modes will improve your productivity for test, debug, and characterization.
Integrated 4-quadrant sourcing and measuring capabilities 
Measurement range: ±210 V, ±3 A (DC), ±10.5 A (pulsed) 
Source and measurement resolution down to 10 fA and 100 nV 
10 microsecond digitizing capability

Datasheet - B2900B-TD-3120-1466-2020-10-06.pdf

UN38.3 Lithium Battery Test Summary

RS Pro

Abus

Screw

O Ring

Surface Mount Resistors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

keysight technologies b2911b series source meter, 100 nv 210 v, 1-channel, 31.8 output pengukur sumber seri b2911b, saluran, 31,8 electrical power testing pengujian daya listrik meter siri 1-saluran, ujian tenaga elektrik keysight/是德科技 系列源表，100 v，单通道，31.8 输出 电力测试 是德科技

keysight-technologies-b2911b-series-source-meter-100-nv-210-v-1-channel-31-8-w-output

Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A

Safety Category	CAT III 1000 V, CAT IV 600V

• Various series, including TL910, TL224 and 80BK (probe)
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910

Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.

• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life
• Long 1m cable lets you comfortably test items in arm's reach without tugging at the multimeter
• Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibility

• Electrical engineering
• Energy sector
• Telecommunications systems
• Manufacturing facilities
 

<h3 class="md-block-header-three">Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Electronic Test Lead Kit</li><li>Product Type	Test Probe</li><li>Connector Type	Spring Loaded Pin</li><li>Lead Length	1m</li><li>Current Rating	3A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Various series, including TL910, TL224 and 80BK (probe) • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.Features &amp; Benefits• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life • Long 1m cable lets you comfortably test items in arm&#x27;s reach without tugging at the multimeter • Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibilityApplications• Electrical engineering • Energy sector • Telecommunications systems • Manufacturing facilities

<h3>Fluke TL910 Electronic Test Lead Kit, Cat Iii, Cat Iv, 3A</h3>
<ul>
<li>&nbsp;Lead Type	Electronic Test Lead Kit</li>
<li>Product Type	Test Probe</li>
<li>Connector Type	Spring Loaded Pin</li>
<li>Lead Length	1m</li>
<li>Current Rating	3A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Various series, including TL910, TL224 and 80BK (probe) 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Electronic Test Lead Kit, 3A Current Rating, 1mm Tip Width - TL910
Need a heavy-duty test lead that can tackle the toughest jobs in CAT III and IV environments? Pair these multimeter leads from FLUKE with your testing equipment to get the ball rolling. As the pins are 102mm long, working your way into hard-to-reach areas is a walk in the park. Both the gold-plated and stainless steel tips are corrosion-resistant, delivering reliable measurements you can bank on.
Features &amp; Benefits
• Spring-loaded pins absorb impact to stop them from snapping under pressure, for a longer service life 
• Long 1m cable lets you comfortably test items in arm's reach without tugging at the multimeter 
• Can be used with any instrument that fits 4mm shrouded banana plugs, for wide compatibility
Applications
• Electrical engineering 
• Energy sector 
• Telecommunications systems 
• Manufacturing facilities 
&nbsp;

Fluke TL910 Electronic Test Probes with Replacement Tips

Datasheet - TL910

fluke tl910 electronic test lead kit, cat iii, iv, 3a kit kabel uji elektronik tl910, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 电子测试引线套件，cat iii、cat iv，3a 电力测试 福禄克

fluke-tl910-electronic-test-lead-kit-cat-iii-cat-iv-3a

SCHNEIDER ELECTRIC Miniature Circuit Breaker (mcb), Acti9 C60H-DC, 2P, 3A, C Curve, 6kA (IEC/EN 60947-2) A9N61523

     This Acti9   C60H-DC is a low voltage direct current miniature circuit breaker (MCB). It   has 2P, rated current 3A and C tripping curve. The rated short circuit   breaking capacity goes up to 20kA at 220VDC conforming to GB 14048.2 standard   and 20kA at 220VDC conforming to GB 14048.2 standard. This product complies   with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC   60947-2. This miniature circuit breaker protects circuit against short   circuit and overload current. It offers VisiTrip for safety during   maintenance and VisiSafe to reduce intervention time. This miniature circuit   breaker protects circuit against short circuit and overload current. This   device is dedicated to industrial control, automations, transport and   renewable energy applications. It has an electrical endurance going up to   3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue   operational voltage is 500VDC. The Ui rated insulation voltage is 500VDC. The   Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz   or 60Hz. It is DIN rail mountable. Its width is 4 pitches of 9mm. Pollution   degree is 3. Overvoltage category is IV. The product colour is white   (RAL9003). The weight is 0.256kg. According to IEC 60529 standard, the degree   of protection is IP20 and IP40 in enclosure. The operating temperature is   -25°C to 70°C. The storage temperature is -40°C to 85°C.     

Product or component type:Miniature circuit-breaker

10 kA Icu at 440 V DC conforming to EN 60947-2

10 kA Icu at 440 V DC conforming to IEC 60947-2

6 kA Icu at 500 V DC conforming to EN 60947-2

6 kA Icu at 500 V DC conforming to IEC 60947-2

20 kA Icu at 220 V DC conforming to GB 14048.2

20 kA Icu at 220 V DC conforming to IEC 60947-2

20 kA Icu at 250 V DC conforming to GB 14048.2

20 kA Icu at 250 V DC conforming to IEC 60947-2

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Miniature Circuit Breaker (mcb), Acti9 C60H-DC, 2P, 3A, C Curve, 6kA (IEC/EN 60947-2) A9N61523</h3><ul class="md-block-unordered-list-item"><li> This Acti9 C60H-DC is a low voltage direct current miniature circuit breaker (MCB). It has 2P, rated current 3A and C tripping curve. The rated short circuit breaking capacity goes up to 20kA at 220VDC conforming to GB 14048.2 standard and 20kA at 220VDC conforming to GB 14048.2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuit against short circuit and overload current. It offers VisiTrip for safety during maintenance and VisiSafe to reduce intervention time. This miniature circuit breaker protects circuit against short circuit and overload current. This device is dedicated to industrial control, automations, transport and renewable energy applications. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 500VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Its width is 4 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The weight is 0.256kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C. </li><li>Range:Acti9</li><li>Product name:Acti9 C60H-DC</li><li>Product or component type:Miniature circuit-breaker</li><li>Device short name:C60H-DC</li><li>Device application:Distribution</li><li>Poles description:2P</li><li>Number of protected poles:2</li><li>[In] rated current:3 A at 25 °C</li><li>Network type:DC</li><li>Trip unit technology:Thermal-magnetic</li><li>Curve code:C</li><li>Breaking capacity:</li><li>10 kA Icu at 440 V DC conforming to EN 60947-2</li><li>10 kA Icu at 440 V DC conforming to IEC 60947-2</li><li>6 kA Icu at 500 V DC conforming to EN 60947-2</li><li>6 kA Icu at 500 V DC conforming to IEC 60947-2</li><li>20 kA Icu at 220 V DC conforming to GB 14048.2</li><li>20 kA Icu at 220 V DC conforming to IEC 60947-2</li><li>20 kA Icu at 250 V DC conforming to GB 14048.2</li><li>20 kA Icu at 250 V DC conforming to IEC 60947-2</li><li>Utilisation category:</li><li>Category A conforming to EN 60947-2</li><li>Category A conforming to IEC 60947-2</li><li>Suitability for isolation:</li><li>Yes conforming to IEC 60947-2</li><li>Yes conforming to EN 60947-2</li></ul>

<h3>SCHNEIDER ELECTRIC Miniature Circuit Breaker (mcb), Acti9 C60H-DC, 2P, 3A, C Curve, 6kA (IEC/EN 60947-2) A9N61523</h3>
<ul>
<li>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;This Acti9 C60H-DC is a low voltage direct current miniature circuit breaker (MCB). It has 2P, rated current 3A and C tripping curve. The rated short circuit breaking capacity goes up to 20kA at 220VDC conforming to GB 14048.2 standard and 20kA at 220VDC conforming to GB 14048.2 standard. This product complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuit against short circuit and overload current. It offers VisiTrip for safety during maintenance and VisiSafe to reduce intervention time. This miniature circuit breaker protects circuit against short circuit and overload current. This device is dedicated to industrial control, automations, transport and renewable energy applications. It has an electrical endurance going up to 3000 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 500VDC. The Ui rated insulation voltage is 500VDC. The Uimp rated impulse withstand voltage is 6kV. The operating frequency is 50Hz or 60Hz. It is DIN rail mountable. Its width is 4 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The weight is 0.256kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -25°C to 70°C. The storage temperature is -40°C to 85°C.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>Range:Acti9</li>
<li>Product name:Acti9 C60H-DC</li>
<li>Product or component type:Miniature circuit-breaker</li>
<li>Device short name:C60H-DC</li>
<li>Device application:Distribution</li>
<li>Poles description:2P</li>
<li>Number of protected poles:2</li>
<li>[In] rated current:3 A at 25 °C</li>
<li>Network type:DC</li>
<li>Trip unit technology:Thermal-magnetic</li>
<li>Curve code:C</li>
<li>Breaking capacity:</li>
<li>10 kA Icu at 440 V DC conforming to EN 60947-2</li>
<li>10 kA Icu at 440 V DC conforming to IEC 60947-2</li>
<li>6 kA Icu at 500 V DC conforming to EN 60947-2</li>
<li>6 kA Icu at 500 V DC conforming to IEC 60947-2</li>
<li>20 kA Icu at 220 V DC conforming to GB 14048.2</li>
<li>20 kA Icu at 220 V DC conforming to IEC 60947-2</li>
<li>20 kA Icu at 250 V DC conforming to GB 14048.2</li>
<li>20 kA Icu at 250 V DC conforming to IEC 60947-2</li>
<li>Utilisation category:</li>
<li>Category A conforming to EN 60947-2</li>
<li>Category A conforming to IEC 60947-2</li>
<li>Suitability for isolation:</li>
<li>Yes conforming to IEC 60947-2</li>
<li>Yes conforming to EN 60947-2</li>
</ul>

Spec Sheet (A9N61523)

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Other Electrical Accessories

Button Switch

Doreen Tan

Schneider Electric A9N61523 Miniature Circuit Breaker (mcb), Acti9 C60H-DC, 2P, 3A, C Curve, 6kA (IEC/EN 60947-2)

schneider electric a9n61523 miniature circuit breaker (mcb), acti9 c60h-dc, 2p, 3a, curve, 6ka (iec/en 60947-2) pemutus sirkuit miniatur kurva c, breakers mcbs litar electric/施耐德电气 微型断路器 (mcb)，acti9 c60h-dc，2p，3a，c 曲线，6ka 施耐德电气

schneider-electric-a9n61523-miniature-circuit-breaker-mcb-acti9-c60h-dc-2p-3a-c-curve-6ka-iec-en-60947-2

Schneider Electric A9F73103 iC60N - Miniature Circuit Breaker - 1P - 3A - B Curve

This   Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P   circuit breaker with 1 protected pole, 3A rated current and B tripping curve.   The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC   conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to   EN/IEC 60898-1 standard. 

It complies with both industrial standard EN/IEC   60898-1 and residential standard EN/IEC 60947-2. This miniature circuit   breaker protects circuits against short circuit and overload current. Its   unique VisiTrip indicator reduces intervention time by showing the faulty   circuit. Its VisiSafe green strip guarantees the physical opening of the   contacts to allow downstream maintenance. Its fast closing mechanism   independent of manual operation improves its service life. 

It has an   electrical endurance going up to 10000 cycles and a mechanical endurance   going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its   limitation class 3 (according to EN/IEC60898-1) improves downstream circuit   protection cost. The product can be clipped on a DIN rail. Its width is 2   pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The   product colour is white (RAL9003).

 The dimensions are (W) 18mm x (H) 85mm x   (D) 78.5mm. The weight is 0.215kg. According to IEC 60529 standard, the   degree of protection is IP20 and IP40 in enclosure. The operating temperature   is -35°C to 70°C. The storage temperature is -40°C to 85°C.     

<h3 class="md-block-header-three">Schneider Electric A9F73103 iC60N - Miniature Circuit Breaker - 1P - 3A - B Curve</h3>This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole, 3A rated current and B tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 2 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 0.215kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C.

<h3>Schneider Electric A9F73103 iC60N - Miniature Circuit Breaker - 1P - 3A - B Curve</h3>
This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole, 3A rated current and B tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to EN/IEC 60898-1 standard. 
 
It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. 
 
It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 2 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). 
 
 The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 0.215kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

A9F73103

Light Tubes

schneider electric a9f73103 ic60n miniature circuit breaker 1p 3a curve kurva pemutus arus litar miniatur lengkung electric/施耐德电气 小型断路器 曲线 断路器 施耐德电气

schneider-electric-a9f73103-ic60n-miniature-circuit-breaker-1p-3a-b-curve

Schneider Miniatur Circuit Breaker Acti9 iC60N 2P C 3A 440V A9F74203

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 3A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 400VAC conforming to EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 78.5mm. The weight is 0.25kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C. 

<h3 class="md-block-header-three">Schneider Miniatur Circuit Breaker Acti9 iC60N 2P C 3A 440V A9F74203</h3>This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 3A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 400VAC conforming to EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 78.5mm. The weight is 0.25kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C.

<h3>Schneider Miniatur Circuit Breaker Acti9 iC60N 2P C 3A 440V A9F74203</h3>
This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit breaker with 2 protected poles, 3A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 400VAC conforming to EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 4 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 36mm x (H) 85mm x (D) 78.5mm. The weight is 0.25kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C.&nbsp;

Light Switches

Contact Block

Switch Socket Outlet

Pilot Lights

Overload Relays

EasyPact Circuit Breakers 

Electromechanical Interface Relays

Tricia

schneider miniatur circuit breaker acti9 ic60n 2p 3a 440v a9f74203 pemutus sirkuit arus electric litar electric/施耐德电气 施耐德微型断路器acti9 断路器 施耐德电气

schneider-miniatur-circuit-breaker-acti9-ic60n-2p-c-3a-440v-a9f74203

Schneider Electric A9F74103 iC60N - Miniature Circuit Breaker - 1P - 3A - C Curve

This   Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P   circuit breaker with 1 protected pole, 3A rated current and C tripping curve.   The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC   conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to   EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC   60898-1 and residential standard EN/IEC 60947-2. This miniature circuit   breaker protects circuits against short circuit and overload current.

 Its   unique VisiTrip indicator reduces intervention time by showing the faulty   circuit. Its VisiSafe green strip guarantees the physical opening of the   contacts to allow downstream maintenance. Its fast closing mechanism   independent of manual operation improves its service life. It has an   electrical endurance going up to 10000 cycles and a mechanical endurance   going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its   limitation class 3 (according to EN/IEC60898-1) improves downstream circuit   protection cost. The product can be clipped on a DIN rail. Its width is 2   pitches of 9mm. Pollution degree is 3. 

Overvoltage category is IV. The   product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x   (D) 78.5mm. The weight is 0.215kg. According to IEC 60529 standard, the   degree of protection is IP20 and IP40 in enclosure. The operating temperature   is -35°C to 70°C. The storage temperature is -40°C to 85°C.     

<h3 class="md-block-header-three">Schneider Electric A9F74103 iC60N - Miniature Circuit Breaker - 1P - 3A - C Curve</h3>This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole, 3A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 2 pitches of 9mm. Pollution degree is 3. Overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 0.215kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C.

<h3>Schneider Electric A9F74103 iC60N - Miniature Circuit Breaker - 1P - 3A - C Curve</h3>
This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 1P circuit breaker with 1 protected pole, 3A rated current and C tripping curve. The rated short circuit breaking capacity goes up to 50kA at 220VAC to 240VAC conforming to EN/IEC 60947-2 standard and 6000A at 230VAC conforming to EN/IEC 60898-1 standard. It complies with both industrial standard EN/IEC 60898-1 and residential standard EN/IEC 60947-2. This miniature circuit breaker protects circuits against short circuit and overload current. 
 
 Its unique VisiTrip indicator reduces intervention time by showing the faulty circuit. Its VisiSafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. Its fast closing mechanism independent of manual operation improves its service life. It has an electrical endurance going up to 10000 cycles and a mechanical endurance going up to 20000 cycles. The Ui rated insulation voltage is 500VAC. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. The product can be clipped on a DIN rail. Its width is 2 pitches of 9mm. Pollution degree is 3. 
 
Overvoltage category is IV. The product colour is white (RAL9003). The dimensions are (W) 18mm x (H) 85mm x (D) 78.5mm. The weight is 0.215kg. According to IEC 60529 standard, the degree of protection is IP20 and IP40 in enclosure. The operating temperature is -35°C to 70°C. The storage temperature is -40°C to 85°C.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

A9F74103

schneider electric a9f74103 ic60n miniature circuit breaker 1p 3a curve kurva pemutus arus litar miniatur lengkung electric/施耐德电气 小型断路器 曲线 断路器 施耐德电气

schneider-electric-a9f74103-ic60n-miniature-circuit-breaker-1p-3a-c-curve

Lumberg Automation 934871020 RKM 5-506/5 M M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, Straight, 5-pin, B-coded, Translucent Body, 50 V Ac / 60 V Dc, 3 A; Pur Black Cable, 5-wires, 0.25 Mm² 

<h3 class="md-block-header-three">Lumberg Automation 934871020 RKM 5-506/5 M M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, Straight, 5-pin, B-coded, Translucent Body, 50 V Ac / 60 V Dc, 3 A; Pur Black Cable, 5-wires, 0.25 Mm² </h3><ul class="md-block-unordered-list-item"><li>Product Sub Family: M8 Snap-In</li><li>Connector Type: Cordset, Single Ended</li><li>Type of Contact / Gender: Female</li><li>Connector Design: Straight</li><li>Number of Pins: 5</li><li>Coding: B</li><li>Shielding: Unshielded</li></ul>

<h3>Lumberg Automation 934871020 RKM 5-506/5 M M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, Straight, 5-pin, B-coded, Translucent Body, 50 V Ac / 60 V Dc, 3 A; Pur Black Cable, 5-wires, 0.25 Mm²&nbsp;</h3>
<ul>
<li>Product Sub Family: M8 Snap-In</li>
<li>Connector Type: Cordset, Single Ended</li>
<li>Type of Contact / Gender: Female</li>
<li>Connector Design: Straight</li>
<li>Number of Pins: 5</li>
<li>Coding: B</li>
<li>Shielding: Unshielded</li>
</ul>

Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

Lumberg Automation 934871020 RKM 5-506/5 M M8 Snap-In Sensor/Actuator Single-Ended Cordset: Female, Straight, 5-pin, B-coded, Translucent Body, 50 V Ac / 60 V Dc, 3 A; Pur Black Cable, 5-wires, 0.25 Mm²

lumberg automation 934871020 rkm 5-506/5 m8 snap-in sensor/actuator single-ended cordset: female, straight, 5-pin, b-coded, translucent body, 50 ac 60 dc, a; pur black cable, 5-wires, 0.25 mm² sensor/aktuator kabel ujung tunggal: betina, lurus, pin, kode b, badan transparan, hitam pur, kawat, 0,25 circular connectors automasi penderia snap-masuk/penggerak kodset satu hujung: perempuan, b-kod, lutsinar, black, wayar, automation/隆堡自动化 嵌入式传感器/执行器单端线组：母头，直型，5 针，b 编码，半透明主体，50 交流/60 直流，3 a；纯黑色电缆，5 线，0.25 隆堡自动化

lumberg-automation-934871020-rkm-5-506-5-m-m8-snap-in-sensor-actuator-single-ended-cordset-female-straight-5-pin-b-coded-translucent-body-50-v-ac-60-v-dc-3-a-pur-black-cable-5-wires-0-25-mm