Ampco

Igus

MISUMI

Prolockey

Proto

Electricals

electricals

Button Switch

button-switch

Cable Carriers

cable-carriers

Spanners & Sockets

spanners-sockets

Impact Sockets

impact-sockets

Cleaning

cleaning

Pedal Bins

pedal-bins

Mechanical Parts

mechanical-parts

Plain Bearings

plain-bearings

Rubber Seals

rubber-seals

Timing Belts

Suction cups

Timing Pulleys

Safety Fences

Pneumatic Guided Cylinders

Oil Free Bushings

Square End Mills 

Shaft Couplings

Ball Bearings

Electric Linear Actuators

Misumi 

buyerIntroduction

Misumi E-M25.1S Cable Carrier Separators for Medium Load, Inner Height 25mm Type

misumi e-m25.1s cable carrier separators medium load, inner height 25mm type pemisah pembawa kabel untuk beban sedang, tinggi bagian dalam tipe carriers sederhana, dalaman jenis 中等负载电缆托架分离器，内部高度 电缆架 米思米

misumi-e-m25-1s-cable-carrier-separators-for-medium-load-inner-height-25mm-type

Rubber Damper | Outer Diameter 40mm | Inner Diameter 10.5mm | Height 20mm | Material Hard Rubber

Rubber Damper | Outer Diameter 40mm | Inner Diameter 10.5mm | Height 20mm | Material Hard Rubber

Rubber Damper | Outer Diameter 40mm | Inner Diameter 10.5mm | Height 20mm | Material Hard Rubber

John

Others

Parker

Optibelt

VITON

SAMTECH

O Ring

V Rings

Oil Seals

Plumbing Tools & Equipment

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Washers

rubber damper outer diameter 40mm inner 10.5mm height 20mm material hard peredam karet luar dalam 10,5mm tinggi bahan keras seals segel oem getah dalaman pengedap oem/oem代工 橡胶减震器 外径 40 毫米 内径 10.5 高度 20 材质：硬橡胶 oem代工

rubber-damper-outer-diameter-40mm-inner-diameter-10-5mm-height-20mm-material-hard-rubber

rubber damper brake height 11mm outer diameter 27.5mm inner 8mm upper thickness 2.5mm lower 3.5mm peredam karet untuk rem tinggi luar 27,5mm dalam ketebalan atas 2,5mm bawah 3,5mm seals segel oem getah brek dalaman rendah pengedap oem/oem代工 刹车橡胶减震器 高度 11 毫米 外径 27.5 内径 上部厚度 2.5 下部厚度 3.5 oem代工

rubber-damper-for-brake-height-11mm-outer-diameter-27-5mm-inner-diameter-8mm-upper-thickness-2-5mm-lower-thickness-3-5mm

Available with or without tie wrap plates

One-piece mounting bracket - secure fitCorrosion-resistantCan be fabricated Mounting surfaces, fits inside/outsideAvailable with or without tie wrap plates

&nbsp;&nbsp;
One-piece mounting bracket - secure fit
Corrosion-resistant
Can be fabricated&nbsp;
Mounting surfaces, fits inside/outside
Available with or without tie wrap plates

igus Asean

Sleeve Bearings

Control Cable

Linear Bearing

Bar Stock

Data Cable 

Motor Cable 

Lead Screws 

Adhesive & Packing Tapes

Igus® e-chain® Mounting Bracket | 060.20.12

igus® e-chain® mounting bracket 060.20.12 braket pemasangan cable carriers pembawa kabel igus igus/伊格斯 拖链® 安装支架 电缆架 伊格斯

igus-e-chain-mounting-bracket-060-20-12

More InformationBore diameter 10 mmOuter diameter 14 mmOverall width 14 mmLubrication hole YesWeight (kg) 0.008000

More Information
Bore diameter 10 mm
Outer diameter 14 mm
Overall width 14 mm
Lubrication hole Yes
Weight (kg) 0.008000

John Ng

KOYO

Samick

Enerpac

Triangle

Roller Bearing

Other Tools

Cam Follower Bearings

Screw

Ina IR10X14X14-IS1-OF-XL Inner Ring

ina ir10x14x14-is1-of-xl inner ring cincin bagian dalam plain bearings bantalan biasa dalaman galas ina/在一个 伊娜 内圈 滑动轴承 伊纳

ina-ir10x14x14-is1-of-xl-inner-ring

 Prolockey SBL07 Safety Push Button Lockout Tagout

a) Fits on press or screw emergency stop button

b) Easily used and permanently prevent workers from operating carelessly

c)  Hole diameter:22mm;inner height:35mm

<h3 class="md-block-header-three"> Prolockey SBL07 Safety Push Button Lockout Tagout</h3>a) Fits on press or screw emergency stop buttonb) Easily used and permanently prevent workers from operating carelesslyc)  Hole diameter:22mm;inner height:35mm

<h3> Prolockey SBL07 Safety Push Button Lockout Tagout</h3>
a) Fits on press or screw emergency stop button
b) Easily used and permanently prevent workers from operating carelessly
c)  Hole diameter:22mm;inner height:35mm

NANHUA

Eezee Pro

Iflytek

Nitto

Remax

SAIRUI

Guo Mao

Padlocks & Lockout Devices

Padlocks & Lockout Station

Toolbags

Lockout Tags

Safe Box & Safe Chest

Safety Cone

Cable Protectors

Desk stationery

 Samuel Wang

SBL07 Safety Push Button Lockout Tagout Hole diameter:22mm;inner height:35mm

sbl07 safety push button lockout tagout hole diameter:22mm;inner height:35mm pengunci tombol tekan pengaman diameter lubang: 22mm; tinggi bagian dalam: 35mm switch saklar prolockey keselamatan butang kunci keluar lubang:22mm;tinggi dalam:35mm suis oem/oem代工 安全按钮锁定挂牌孔直径：22mm；内高：35mm 按钮开关 普罗洛基

sbl07-safety-push-button-lockout-tagout-hole-diameter-22mm-inner-height-35mm

Prolockey SBL08 Safety Push Button Lockout Tagout 

c)  Hole diameter:30mm;inner height:35mm

<h3 class="md-block-header-three">Prolockey SBL08 Safety Push Button Lockout Tagout </h3>a) Fits on press or screw emergency stop buttonb) Easily used and permanently prevent workers from operating carelesslyc)  Hole diameter:30mm;inner height:35mm

<h3>Prolockey SBL08 Safety Push Button Lockout Tagout&nbsp;</h3>
a) Fits on press or screw emergency stop button
b) Easily used and permanently prevent workers from operating carelessly
c)  Hole diameter:30mm;inner height:35mm

SBL08 Safety Push Button Lockout Tagout Hole diameter:30mm;inner height:35mm

sbl08 safety push button lockout tagout hole diameter:30mm;inner height:35mm pengunci tombol tekan pengaman diameter lubang: 30mm; tinggi bagian dalam: 35mm switch saklar prolockey keselamatan butang kunci keluar lubang:30mm;tinggi dalam:35mm suis oem/oem代工 安全按钮锁定挂牌孔直径：30mm；内高：35mm 按钮开关 普罗洛基

sbl08-safety-push-button-lockout-tagout-hole-diameter-30mm-inner-height-35mm

 Prolockey SBL10 Emergency Safety Stop Lockout

Fits on press or screw emergency stop button

b) Fits on press or screw emergency stop button.

c) Easily used and permanently prevent workers from operating carelessly.

<h3 class="md-block-header-three"> Prolockey SBL10 Emergency Safety Stop Lockout</h3>Color:TransparentFits on press or screw emergency stop button29.8mm diameter switches Hole diameter:29.8min; inner height:47mmEmergency Stop Lockout SBL09a) Made from transparent PCb) Fits on press or screw emergency stop button.c) Easily used and permanently prevent workers from operating carelessly.

<h3> Prolockey SBL10 Emergency Safety Stop Lockout</h3>
Color:Transparent
Fits on press or screw emergency stop button
29.8mm diameter switches&nbsp;
Hole diameter:29.8min; inner height:47mm
Emergency Stop Lockout SBL09
a) Made from transparent PC
b) Fits on press or screw emergency stop button.
c) Easily used and permanently prevent workers from operating carelessly.

SBL10 Emergency Safety Stop Lockout Hole Diameter : Hole diameter:29.8min; Inner height:47mm

sbl10 emergency safety stop lockout hole diameter diameter:29.8min; inner height:47mm lubang pengunci pengaman darurat sbl10: lubang: 29,8 menit; tinggi bagian dalam: 47mm button switch saklar tombol prolockey keselamatan kecemasan berhenti kunci lubang:29.8min; ketinggian dalaman: 47mm suis butang oem/oem代工 sbl10紧急安全停止锁定孔直径：孔直径：29.8min；内高：47mm 按钮开关 普罗洛基

sbl10-emergency-safety-stop-lockout-hole-diameter-hole-diameter-29-8min-inner-height-47mm

 Prolockey SBL09 Emergency Safety Stop Lockout

d) Hole diameter:22.7mm; inner height:47mm

<h3 class="md-block-header-three"> Prolockey SBL09 Emergency Safety Stop Lockout</h3>a) Made from transparent PCb) Fits on press or screw emergency stop button.c) Easily used and permanently prevent workers from operating carelessly.d) Hole diameter:22.7mm; inner height:47mm

<h3> Prolockey SBL09 Emergency Safety Stop Lockout</h3>
a) Made from transparent PC
b) Fits on press or screw emergency stop button.
c) Easily used and permanently prevent workers from operating carelessly.
d) Hole diameter:22.7mm; inner height:47mm

SBL09 Emergency Safety Stop Lockout Hole diameter:22.7mm;inner height:47mm

sbl09 emergency safety stop lockout hole diameter:22.7mm;inner height:47mm pengunci pengaman darurat diameter lubang: 22,7 mm; tinggi bagian dalam: 47mm button switch saklar tombol prolockey keselamatan kecemasan berhenti kunci lubang:22.7mm;tinggi dalam:47mm suis butang oem/oem代工 紧急安全停止锁定装置 孔直径：22.7mm；内高：47mm 按钮开关 普罗洛基

sbl09-emergency-safety-stop-lockout-hole-diameter-22-7mm-inner-height-47mm

35 LITRES RECTANGLE PLASTIC FOOT PEDAL STEP-ON BIN

Description: Featuring a Off-white rectangular structural, our pedal bin (HDPE) provides you with a handy and convenient solution for disposal.

Made from recyclable material, thus it is environment friendly.

Touchless lid. Step to lift the lid for waste disposal. Smooth inner surface make cleaning easier. No messy waste with a pair of trash bag holder; holds the plastic trash bag in place and capture all waste thrown in.  Keep the workplace tidy and organized at all times. 

Generously sized, this 35L bin is most suitable for kitchens and offices. Adding this sleek and classic evergreen design waste bin is large enough for kitchen waste but small enough to be tucked away effortlessly. 

Most ideal for Food Operator, Kitchens, Toilets, Bedrooms, Bathroom, Schools, Offices, Pantries, beside vending machines, Medical Centre, Dental Clinic, Hospital, Hospice, F&B, laboratory and under the cashier counters, etc. 

High-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code.

HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. 

The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.

HDPE is resistant to many different solvents.

Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.

· HDPE retains its rigid structure until its melting point is reached.

· Once in the melt state, this polymer can be easily molded into any desired shape.

· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.

· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.

· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.

· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.

· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.

· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.

· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.

· The resin identification code of HDPE is 2, it can be recycled easily.

· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.

· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.

To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded.

 #bin #dustbin #pedal #pedal bin #plastic #rectangular #kitchen #laundry #cheap #f&b #waste #garbage #trash #litter #robust #medicalcentre #hospital

35 LITRES RECTANGLE PLASTIC FOOT PEDAL STEP-ON BINModel: H35Capacity: 35-LitresDimensions (mm): 400 W x 300 D x 565 HtDescription: Featuring a Off-white rectangular structural, our pedal bin (HDPE) provides you with a handy and convenient solution for disposal.Made from recyclable material, thus it is environment friendly.Touchless lid. Step to lift the lid for waste disposal. Smooth inner surface make cleaning easier. No messy waste with a pair of trash bag holder; holds the plastic trash bag in place and capture all waste thrown in. Keep the workplace tidy and organized at all times. Generously sized, this 35L bin is most suitable for kitchens and offices. Adding this sleek and classic evergreen design waste bin is large enough for kitchen waste but small enough to be tucked away effortlessly. Most ideal for Food Operator, Kitchens, Toilets, Bedrooms, Bathroom, Schools, Offices, Pantries, beside vending machines, Medical Centre, Dental Clinic, Hospital, Hospice, F&amp;B, laboratory and under the cashier counters, etc. Material PropertiesHigh-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number &quot;2&quot; as its resin identification code.HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.HDPE is resistant to many different solvents. <h3 class="md-block-header-three">INTERESTING FACTS</h3>Why is HDPE so Popular?Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.Moldability· HDPE retains its rigid structure until its melting point is reached.· Once in the melt state, this polymer can be easily molded into any desired shape.· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.Resistance to Corrosion· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.Strength to Density Ratio· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.Recyclable· The resin identification code of HDPE is 2, it can be recycled easily.· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded. #bin #dustbin #pedal #pedal bin #plastic #rectangular #kitchen #laundry #cheap #f&amp;b #waste #garbage #trash #litter #robust #medicalcentre #hospital

35 LITRES RECTANGLE PLASTIC FOOT PEDAL STEP-ON BIN
Model: H35
Capacity: 35-Litres
Dimensions (mm): 400 W x 300 D x 565 Ht
Description: Featuring a Off-white rectangular structural, our pedal bin (HDPE) provides you with a handy and convenient solution for disposal.
Made from recyclable material, thus it is environment friendly.
Touchless lid. Step to lift the lid for waste disposal. Smooth inner surface make cleaning easier. No messy waste with a pair of trash bag holder; holds the plastic trash bag in place and capture all waste thrown in. Keep the workplace tidy and organized at all times.&nbsp;
Generously sized, this 35L bin is most suitable for kitchens and offices. Adding this sleek and classic evergreen design waste bin is large enough for kitchen waste but small enough to be tucked away effortlessly.&nbsp;
Most ideal for Food Operator, Kitchens, Toilets, Bedrooms, Bathroom, Schools, Offices, Pantries, beside vending machines, Medical Centre, Dental Clinic, Hospital, Hospice, F&amp;B, laboratory and under the cashier counters, etc.&nbsp;
&nbsp;Material Properties
High-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code.
HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE.&nbsp;
The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.
HDPE is resistant to many different solvents.

<h3>INTERESTING FACTS</h3>
Why is HDPE so Popular?
Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.
Moldability
· HDPE retains its rigid structure until its melting point is reached.
· Once in the melt state, this polymer can be easily molded into any desired shape.
· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.
Resistance to Corrosion
· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.
· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.
· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.
Strength to Density Ratio
· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.
· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.
· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.
Recyclable
· The resin identification code of HDPE is 2, it can be recycled easily.
· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.
· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.
To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded.
&nbsp;#bin #dustbin #pedal #pedal bin #plastic #rectangular #kitchen #laundry #cheap #f&amp;b #waste #garbage #trash #litter #robust #medicalcentre #hospital

Indoor Bins

Label Papers

TAN CHONG HWEE

35 Litres Rect. Plastic Foot Pedal Step-On Garbage Waste Bin - H35

35 litres rect. plastic foot pedal step-on garbage waste bin h35 tempat sampah plastik persegi panjang liter dengan kaki bins oem pijak tong oem/oem代工 升矩形塑料脚踏式垃圾桶 脚踏垃圾桶 oem代工