BOSSIL

Precision Brand

SEALXPERT

Adhesive

adhesive

Adhesive Glue

adhesive-glue

Power Tools

power-tools

Drill Bits & Drill Bit Sets

drill-bits-drill-bit-sets

Machinery Parts

machinery-parts

Metal Rods 

metal-rods

Locks & Iron Mongery

locks-iron-mongery

Padlocks & Lockout Devices

padlocks-lockout-devices

Construction

construction

Putty

putty

Safety

safety

Workplace Safety

workplace-safety

Precision Brand W-1 Water Hardening Drill Rod No. 36 18144

Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.

<h3 class="md-block-header-three">Precision Brand W-1 Water Hardening Drill Rod No. 36 18144</h3>Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Water Hardening Drill Rod</li><li>Length: 36 inch</li><li>Diameter: No. 36</li><li>ORM-D: No</li><li>Material: 1095 Steel</li><li>MSDS ID: Tool Steels 032613</li><li>Quantity per Package: 1 Piece</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/zbhm7AbC0lVI982_PkA3qM.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>Precision Brand W-1 Water Hardening Drill Rod No. 36 18144</h3>
Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Water Hardening Drill Rod</li>
<li>Length: 36 inch</li>
<li>Diameter: No. 36</li>
<li>ORM-D: No</li>
<li>Material: 1095 Steel</li>
<li>MSDS ID: Tool Steels 032613</li>
<li>Quantity per Package: 1 Piece</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:dccls"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/zbhm7AbC0lVI982_PkA3qM.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="dccls" 
 layout="nodisplay"></amp-image-lightbox>

IT Accessories

Hooks & Eyes

Machinery Accessories

Leland Tan

buyerIntroduction

precision brand w-1 water hardening drill rod no. 36 18144 merek presisi batang pengerasan air bits bit sets mata bor set pengeras gerudi brand/精密品牌 w-1水淬钻杆编号36 钻头和钻头套装 精密品牌

precision-brand-w-1-water-hardening-drill-rod-no-36-18144

Precision Brand O-1 Oil Hardening Drill Rod No. 36 28144

Made from 1085 steel and colour coded with yellow ends. Excellent toughness and machinability. Non shrinking, general purpose tool steel. Electric furnace melt tool steel. Highly abrasion resistant. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.

<h3 class="md-block-header-three">Precision Brand O-1 Oil Hardening Drill Rod No. 36 28144</h3>Made from 1085 steel and colour coded with yellow ends. Excellent toughness and machinability. Non shrinking, general purpose tool steel. Electric furnace melt tool steel. Highly abrasion resistant. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Oil Hardening Drill Rod</li><li>Length: 36 inch</li><li>Diameter: No. 36</li><li>ORM-D: No</li><li>Material: 1085 Steel</li><li>MSDS ID: Tool Steels 032613</li><li>Quantity per Package: 1 Piece</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/eBkN9U_qiNystD5HAW4S1V.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>Precision Brand O-1 Oil Hardening Drill Rod No. 36 28144</h3>
Made from 1085 steel and colour coded with yellow ends. Excellent toughness and machinability. Non shrinking, general purpose tool steel. Electric furnace melt tool steel. Highly abrasion resistant. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Oil Hardening Drill Rod</li>
<li>Length: 36 inch</li>
<li>Diameter: No. 36</li>
<li>ORM-D: No</li>
<li>Material: 1085 Steel</li>
<li>MSDS ID: Tool Steels 032613</li>
<li>Quantity per Package: 1 Piece</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:313si"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/eBkN9U_qiNystD5HAW4S1V.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="313si" 
 layout="nodisplay"></amp-image-lightbox>

precision brand o-1 oil hardening drill rod no. 36 28144 merek presisi batang pengerasan minyak metal rods bor pengeras brand/精密品牌 o-1油淬火钻杆编号36 精密品牌

precision-brand-o-1-oil-hardening-drill-rod-no-36-28144

Precision Brand W-1 Water Hardening Drill Rod 1-3/32inch 18022

<h3 class="md-block-header-three">Precision Brand W-1 Water Hardening Drill Rod 1-3/32inch 18022</h3>Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Water Hardening Drill Rod</li><li>Length: 36 inch</li><li>Diameter: 1-3/32 inch</li><li>ORM-D: No</li><li>Material: 1095 Steel</li><li>MSDS ID: Tool Steels 032613</li><li>Quantity per Package: 1 Piece</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/gZkmvoh_unqJWWWfXok5nw.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>Precision Brand W-1 Water Hardening Drill Rod 1-3/32inch 18022</h3>
Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Water Hardening Drill Rod</li>
<li>Length: 36 inch</li>
<li>Diameter: 1-3/32 inch</li>
<li>ORM-D: No</li>
<li>Material: 1095 Steel</li>
<li>MSDS ID: Tool Steels 032613</li>
<li>Quantity per Package: 1 Piece</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:d75q0"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/gZkmvoh_unqJWWWfXok5nw.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="d75q0" 
 layout="nodisplay"></amp-image-lightbox>

precision brand w-1 water hardening drill rod 1-3/32inch 18022 1-3 32inch metal rods 32inci brand/精密品牌 w-1水淬钻杆1-3 精密品牌

precision-brand-w-1-water-hardening-drill-rod-1-3-32inch-18022

Precision Brand O-1 Oil Hardening Drill Rod 2inch 28001

<h3 class="md-block-header-three">Precision Brand O-1 Oil Hardening Drill Rod 2inch 28001</h3>Made from 1085 steel and colour coded with yellow ends. Excellent toughness and machinability. Non shrinking, general purpose tool steel. Electric furnace melt tool steel. Highly abrasion resistant. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Oil Hardening Drill Rod</li><li>Length: 36 inch</li><li>Diameter: 2 inch</li><li>ORM-D: No</li><li>Material: 1085 Steel</li><li>MSDS ID: Tool Steels 032613</li><li>Quantity per Package: 1 Piece</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/1HdVQOltC_7MEcGyHo12hB.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>Precision Brand O-1 Oil Hardening Drill Rod 2inch 28001</h3>
Made from 1085 steel and colour coded with yellow ends. Excellent toughness and machinability. Non shrinking, general purpose tool steel. Electric furnace melt tool steel. Highly abrasion resistant. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Oil Hardening Drill Rod</li>
<li>Length: 36 inch</li>
<li>Diameter: 2 inch</li>
<li>ORM-D: No</li>
<li>Material: 1085 Steel</li>
<li>MSDS ID: Tool Steels 032613</li>
<li>Quantity per Package: 1 Piece</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:f88oo"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/1HdVQOltC_7MEcGyHo12hB.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="f88oo" 
 layout="nodisplay"></amp-image-lightbox>

precision brand o-1 oil hardening drill rod 2inch 28001 metal rods batang bor pengeras minyak 2inci brand/精密品牌 o-1油淬硬钻杆2英寸28001 精密品牌

precision-brand-o-1-oil-hardening-drill-rod-2inch-28001

Precision Brand W-1 Water Hardening Drill Rod 1-1/8inch 18021

<h3 class="md-block-header-three">Precision Brand W-1 Water Hardening Drill Rod 1-1/8inch 18021</h3>Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.<h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Precision Brand</li><li>Product Type: Water Hardening Drill Rod</li><li>Length: 36 inch</li><li>Diameter: 1-1/8 inch</li><li>ORM-D: No</li><li>Material: 1095 Steel</li><li>MSDS ID: Tool Steels 032613</li><li>Quantity per Package: 1 Piece</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/2xWAo6wYUm1qJ9H7Z1Pb7W.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h3>Precision Brand W-1 Water Hardening Drill Rod 1-1/8inch 18021</h3>
Made from 1095 steel and colour coded with red ends. Tough hardening quality affords optimum response to heat treatment and provides toughness and maximum wear resistance in service. High carbon content allows it to be used without heat treatment for many maintenance applications. Fine grained, electric furnace melt, commercial grade tool steel. Most popular, versatile and least expensive type. Precision Brand Drill Rod rounds are made of annealed, ground and polished, general purpose tool steel. They are used for punches, tools and dies, drills, taps, arbors, roller bearings, dowel pins and a variety of machine parts where high strength and long life are required. Excellent finish, strength and machineability make drill rod ideally suited for power drive shafts and applications where accuracy and straightness are required.
<h3>Specification:</h3>
<ul>
<li>Brand: Precision Brand</li>
<li>Product Type: Water Hardening Drill Rod</li>
<li>Length: 36 inch</li>
<li>Diameter: 1-1/8 inch</li>
<li>ORM-D: No</li>
<li>Material: 1095 Steel</li>
<li>MSDS ID: Tool Steels 032613</li>
<li>Quantity per Package: 1 Piece</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bhqig"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/2xWAo6wYUm1qJ9H7Z1Pb7W.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bhqig" 
 layout="nodisplay"></amp-image-lightbox>

precision brand w-1 water hardening drill rod 1-1/8inch 18021 1-1 8inch metal rods brand/精密品牌 w-1水淬钻杆1-1 精密品牌

precision-brand-w-1-water-hardening-drill-rod-1-1-8inch-18021

Tri Circle is known for producing reliable and high-quality security products, ensuring peace of mind for users. Suitable for residential, commercial, and industrial use, including gates, lockers, storage units and more. 

Key Features: 
 •  Solid Brass Construction: The padlock's body is made from solid brass, offering resistance to corrosion and rust, making it suitable for both indoor and outdoor use
 •  Hardened Steel Shackle: Equipped with a hardened steel shackle, the padlock provides enhanced protection against cutting and sawing attempts 
 •  Double Locking Mechanism: The double locking feature adds an extra layer of security, making it more resistant to prying and tampering
 •  Brass Cylinder and Components: Incorporates a high-security brass cylinder along with brass plugs, bolts, and pins, contributing to its overall robustness and reliability
 •  Three Keys Included: Each padlock is supplied with three keys for user convenience 

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #TriCirclePadlock #HardenedSteelLock #SolidBrassPadlock #HeavyDutySecurity #DoubleLocking #SecuritySolutions #LockAndKey #SecureLife #SafetyGear #HomeImprovement #DIYSecurity #WeatherResistant #DurableSecurity #RustProof #CutResistant #HeavyDutyLock #SolidBrass #SteelShackle 

Tri Circle is known for producing reliable and high-quality security products, ensuring peace of mind for users. Suitable for residential, commercial, and industrial use, including gates, lockers, storage units and more. Key Features: • Solid Brass Construction: The padlock&#x27;s body is made from solid brass, offering resistance to corrosion and rust, making it suitable for both indoor and outdoor use • Hardened Steel Shackle: Equipped with a hardened steel shackle, the padlock provides enhanced protection against cutting and sawing attempts • Double Locking Mechanism: The double locking feature adds an extra layer of security, making it more resistant to prying and tampering • Brass Cylinder and Components: Incorporates a high-security brass cylinder along with brass plugs, bolts, and pins, contributing to its overall robustness and reliability • Three Keys Included: Each padlock is supplied with three keys for user convenience #DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #TriCirclePadlock #HardenedSteelLock #SolidBrassPadlock #HeavyDutySecurity #DoubleLocking #SecuritySolutions #LockAndKey #SecureLife #SafetyGear #HomeImprovement #DIYSecurity #WeatherResistant #DurableSecurity #RustProof #CutResistant #HeavyDutyLock #SolidBrass #SteelShackle

Tri Circle is known for producing reliable and high-quality security products, ensuring peace of mind for users. Suitable for residential, commercial, and industrial use, including gates, lockers, storage units and more.&nbsp;
Key Features: 
 • Solid Brass Construction: The padlock's body is made from solid brass, offering resistance to corrosion and rust, making it suitable for both indoor and outdoor use 
 • Hardened Steel Shackle: Equipped with a hardened steel shackle, the padlock provides enhanced protection against cutting and sawing attempts 
 • Double Locking Mechanism: The double locking feature adds an extra layer of security, making it more resistant to prying and tampering 
 • Brass Cylinder and Components: Incorporates a high-security brass cylinder along with brass plugs, bolts, and pins, contributing to its overall robustness and reliability 
 • Three Keys Included: Each padlock is supplied with three keys for user convenience 
 
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #TriCirclePadlock #HardenedSteelLock #SolidBrassPadlock #HeavyDutySecurity #DoubleLocking #SecuritySolutions #LockAndKey #SecureLife #SafetyGear #HomeImprovement #DIYSecurity #WeatherResistant #DurableSecurity #RustProof #CutResistant #HeavyDutyLock #SolidBrass #SteelShackle&nbsp;

Others

RJ LONDON PAINT

MK ELECTRIC

SCHNEIDER ELECTRIC

ATLAS FILTRI

SHOWY

HAGER

HIT TOOLS

Leak Repair

Paint Thinners, Solvents & Cleaners

Mixers

Bathroom Accessories

Junction & Enclosure Box

Rocker Switch

Cable Ties

Cable Carriers

Clearing Drainage Chokes

Keith Pey

Tri Circle Long Hardened Steel Shackle Solid Brass Padlock

tri circle long hardened steel shackle solid brass padlock gembok kuningan padat belenggu baja keras panjang tiga lingkaran padlocks lockout devices perangkat penguncian oem keluli pejal mangga kunci peranti oem/oem代工 三圈长硬化钢锁环实心黄铜挂锁 挂锁和锁定装置 oem代工

tri-circle-long-hardened-steel-shackle-solid-brass-padlock

(25 x 51.9 x 12.6 x 4.4)mm

(32 x 62.6 x 16.6 x 5.4)mm

(38 x 74 x 19.6 x 6.4)mm

(50 x 83.9 x 25.2 x 8.8)mm

W x C1 x C2 x Ø

Tri Circle Hardened Steel Standard Shackle Solid Brass Padlock

tri circle hardened steel standard shackle solid brass padlock gembok kuningan padat dengan belenggu standar baja keras tiga lingkaran padlocks lockout devices perangkat penguncian oem keluli mengeras loyang pepejal mangga kunci peranti oem/oem代工 三环硬化钢标准锁扣实心黄铜挂锁 挂锁和锁定装置 oem代工

tri-circle-hardened-steel-standard-shackle-solid-brass-padlock

(21 x 14 x 10.7 x 3.3)mm

(25 x 17 x 12.6 x 4.4)mm

(32 x 22 x 16.6. x 5.4)mm

(38 x 26 x 19.6 x 6.4)mm

(50 x 33.9 x 25.2 x 8.8)mm

(63 x 43 x 32.2 x 10.8)mm

(75 x 52.7 x 37.8 x 12.2)mm

A fast-setting, fiberglass-reinforced polymer compound enables permanent repairs on fiberglass, concrete, ceramic, glass, metals, wood, and many plastics. It adheres to damp, wet, or underwater surfaces and requires no measuring or mixing tools, as each stick contains pre-measured activator and base. With a clay-like consistency, it turns white after mixing, eliminating drips and runs while allowing easy shaping. Once cured, it can be drilled, screwed, filed, sanded, or painted, and resists water, extreme temperatures, and chemicals. Suitable for both interior and exterior use, it’s ideal for underwater repairs.

Appearance: : Bluish-green paste (Resin)
                             White paste (Hardener)

Main ingredients: Epoxy resin
                                       Polymercaptan hardener

Working time (10 g, 25 °C): 3 minutes (depending on the adhesive amount and temperature)

Tensile lap shear strength (N/mm2) ASTM D1002: Minimum 5

Hardness (Shore D) ASTM D2240: Minimum 80

#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #WetAreaPutty #BS8139

A fast-setting, fiberglass-reinforced polymer compound enables permanent repairs on fiberglass, concrete, ceramic, glass, metals, wood, and many plastics. It adheres to damp, wet, or underwater surfaces and requires no measuring or mixing tools, as each stick contains pre-measured activator and base. With a clay-like consistency, it turns white after mixing, eliminating drips and runs while allowing easy shaping. Once cured, it can be drilled, screwed, filed, sanded, or painted, and resists water, extreme temperatures, and chemicals. Suitable for both interior and exterior use, it’s ideal for underwater repairs.Product Specifications:<ul class="md-block-unordered-list-item"><li>Appearance: : Bluish-green paste (Resin) White paste (Hardener)</li><li>Odor: Sulphur-like</li><li>Main ingredients: Epoxy resin Polymercaptan hardener</li><li>Density: 1.9 g/mL</li><li>Mixing ratio: 1:1 (by volume &amp; weight)</li><li>Working time (10 g, 25 °C): 3 minutes (depending on the adhesive amount and temperature)</li><li>Tensile lap shear strength (N/mm2) ASTM D1002: Minimum 5</li><li>Hardness (Shore D) ASTM D2240: Minimum 80</li><li>Working time at 25 °C: &lt;3 minutes</li><li>100% Curing time at 25 °C: 24 hours</li><li>Non-volatile content: 100%</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #WetAreaPutty #BS8139

A fast-setting, fiberglass-reinforced polymer compound enables permanent repairs on fiberglass, concrete, ceramic, glass, metals, wood, and many plastics. It adheres to damp, wet, or underwater surfaces and requires no measuring or mixing tools, as each stick contains pre-measured activator and base. With a clay-like consistency, it turns white after mixing, eliminating drips and runs while allowing easy shaping. Once cured, it can be drilled, screwed, filed, sanded, or painted, and resists water, extreme temperatures, and chemicals. Suitable for both interior and exterior use, it’s ideal for underwater repairs.
Product Specifications:
<ul>
<li>Appearance: : Bluish-green paste (Resin) 
 White paste (Hardener)</li>
<li>Odor: Sulphur-like</li>
<li>Main ingredients: Epoxy resin 
 Polymercaptan hardener</li>
<li>Density: 1.9 g/mL</li>
<li>Mixing ratio: 1:1 (by volume &amp; weight)</li>
<li>Working time (10 g, 25 °C): 3 minutes (depending on the adhesive amount and temperature)</li>
<li>Tensile lap shear strength (N/mm2) ASTM D1002: Minimum 5</li>
<li>Hardness (Shore D) ASTM D2240: Minimum 80</li>
<li>Working time at 25 °C: &lt;3 minutes</li>
<li>100% Curing time at 25 °C: 24 hours</li>
<li>Non-volatile content: 100%</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #WetAreaPutty #BS8139

BRADY

Other Fasteners

Switch Socket Outlet

Bags, Filters & Accessories

Epoxy

Bossil 3 Minutes Wet Area Putty 8139 Made in Malaysia

bossil minutes wet area putty 8139 made malaysia buatan adhesive glue lem perekat minit gam pelekat bossil/博西尔 分钟湿区腻子 马来西亚制造 胶水 博西尔

bossil-3-minutes-wet-area-putty-8139-made-in-malaysia

50gm

Weight

Key Features: 
 •  Key Retention Mechanism: A unique mechanism that ensures the key cannot be removed from the lock unless it is in the locked position; thus preventing accidental removal of the key while the lock is open, ensuring the lock is always secured when the key is taken out
 •  Solid Brass Construction: The padlock's body is made from solid brass, offering resistance to corrosion and rust, making it suitable for both indoor and outdoor use
 •  Hardened Steel Shackle: Equipped with a hardened steel shackle, the padlock provides enhanced protection against cutting and sawing attempts 
 •  Double Locking Mechanism: The double locking feature adds an extra layer of security, making it more resistant to prying and tampering
 •  Brass Cylinder and Components: Incorporates a high-security brass cylinder along with brass plugs, bolts, and pins, contributing to its overall robustness and reliability
 •  Three Keys Included: Each padlock is supplied with three keys for user convenience 

#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #TriCirclePadlock #HardenedSteelLock #SolidBrassPadlock #HeavyDutySecurity #DoubleLocking #SecuritySolutions #LockAndKey #SecureLife #SafetyGear #HomeImprovement #DIYSecurity #WeatherResistant #DurableSecurity #RustProof #CutResistant #HeavyDutyLock #SolidBrass #SteelShackle
 
  

Tri Circle is known for producing reliable and high-quality security products, ensuring peace of mind for users. Suitable for residential, commercial, and industrial use, including gates, lockers, storage units and more. Key Features: • Key Retention Mechanism: A unique mechanism that ensures the key cannot be removed from the lock unless it is in the locked position; thus preventing accidental removal of the key while the lock is open, ensuring the lock is always secured when the key is taken out • Solid Brass Construction: The padlock&#x27;s body is made from solid brass, offering resistance to corrosion and rust, making it suitable for both indoor and outdoor use • Hardened Steel Shackle: Equipped with a hardened steel shackle, the padlock provides enhanced protection against cutting and sawing attempts • Double Locking Mechanism: The double locking feature adds an extra layer of security, making it more resistant to prying and tampering • Brass Cylinder and Components: Incorporates a high-security brass cylinder along with brass plugs, bolts, and pins, contributing to its overall robustness and reliability • Three Keys Included: Each padlock is supplied with three keys for user convenience #DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #TriCirclePadlock #HardenedSteelLock #SolidBrassPadlock #HeavyDutySecurity #DoubleLocking #SecuritySolutions #LockAndKey #SecureLife #SafetyGear #HomeImprovement #DIYSecurity #WeatherResistant #DurableSecurity #RustProof #CutResistant #HeavyDutyLock #SolidBrass #SteelShackle

Tri Circle is known for producing reliable and high-quality security products, ensuring peace of mind for users. Suitable for residential, commercial, and industrial use, including gates, lockers, storage units and more.&nbsp;
Key Features: 
 • Key Retention Mechanism: A unique mechanism that ensures the key cannot be removed from the lock unless it is in the locked position; thus preventing accidental removal of the key while the lock is open, ensuring the lock is always secured when the key is taken out 
 • Solid Brass Construction: The padlock's body is made from solid brass, offering resistance to corrosion and rust, making it suitable for both indoor and outdoor use 
 • Hardened Steel Shackle: Equipped with a hardened steel shackle, the padlock provides enhanced protection against cutting and sawing attempts 
 • Double Locking Mechanism: The double locking feature adds an extra layer of security, making it more resistant to prying and tampering 
 • Brass Cylinder and Components: Incorporates a high-security brass cylinder along with brass plugs, bolts, and pins, contributing to its overall robustness and reliability 
 • Three Keys Included: Each padlock is supplied with three keys for user convenience 
 
#DHES #hardwarestore #hardware #hardwareshop #diyproject #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #supportlocalsg #supportlocalbusiness #TriCirclePadlock #HardenedSteelLock #SolidBrassPadlock #HeavyDutySecurity #DoubleLocking #SecuritySolutions #LockAndKey #SecureLife #SafetyGear #HomeImprovement #DIYSecurity #WeatherResistant #DurableSecurity #RustProof #CutResistant #HeavyDutyLock #SolidBrass #SteelShackle 
 
&nbsp;&nbsp;

Tri Circle Side-Entry Key Retaining Hardened Steel Standard Shackle Solid Brass Padlock

tri circle side-entry key retaining hardened steel standard shackle solid brass padlock gembok kuningan padat dengan kunci masuk samping tiga lingkaran yang mempertahankan baja keras standar belenggu padlocks lockout devices perangkat penguncian oem sisi menahan keluli tegar loyang pepejal mangga peranti oem/oem代工 三环侧入式钥匙固定硬化钢标准锁扣实心黄铜挂锁 挂锁和锁定装置 oem代工

tri-circle-side-entry-key-retaining-hardened-steel-standard-shackle-solid-brass-padlock

(22 x 12.8 x 10.8 x 3.4)mm

(25 x 16.6 x 12.8 x 4.4)mm

(32 x 20.3 x 16.7 x 5.0)mm

W x C1  x C2 x Ø

3M™ Scotchcast™ Electrical Resin 2131 is a 2 part, flame retardant compound, useful for coating cable jackets when splicing or repairing mine and portable cables. This permanent, polyurethane, liquid type resin has a unique formulation used in rugged conditions. The high dielectric strength offers a very good electrical insulating property to the resin

3M™ Scotchcast™ Flame Retardant Resin 2131 has low gel point rating to ensure curing at room temperature. The high tensile strength of the resin exhibits a semi flexible property and good adhesion property after curing. It is ideal for applications that need excellent thermal shock and mechanical shock resistance. It has a high flash point, helping prevent any fire hazard due to quick ignition. The flame retardant resin allows you to insulate cable splices operating up to 1 kV and to seal the crotch or sheath when terminating multi core cables. ASTM and MSHA Approved, RoHS 2011/65/EU Compliant.

Applications Sealing, electrical insulation and mechanical protection

Maximum Operating Temperature 90ºC (194ºF) continuous; overload rating 130ºC (266ºF)

<h3 class="md-block-header-three">3M 2131-B Compound Flame Retardant 210GM</h3>Desc :3M™ Scotchcast™ Electrical Resin 2131 is a 2 part, flame retardant compound, useful for coating cable jackets when splicing or repairing mine and portable cables. This permanent, polyurethane, liquid type resin has a unique formulation used in rugged conditions. The high dielectric strength offers a very good electrical insulating property to the resin3M™ Scotchcast™ Flame Retardant Resin 2131 has low gel point rating to ensure curing at room temperature. The high tensile strength of the resin exhibits a semi flexible property and good adhesion property after curing. It is ideal for applications that need excellent thermal shock and mechanical shock resistance. It has a high flash point, helping prevent any fire hazard due to quick ignition. The flame retardant resin allows you to insulate cable splices operating up to 1 kV and to seal the crotch or sheath when terminating multi core cables. ASTM and MSHA Approved, RoHS 2011/65/EU Compliant.Technical Spec :<ul class="md-block-unordered-list-item"><li>Applications Sealing, electrical insulation and mechanical protection</li><li>Brands Scotchcast™</li><li>Cure Method Room</li><li>Dielectric Strength (V/mil) 343 V/mil</li><li>Elongation 3.39 Percent</li><li>Flexibility Flexible</li><li>Form Liquid</li><li>Gel Time 17 min @ 73 °F (23 °C)</li><li>Hardness 82 Shore A</li><li>Material Polyurethane</li><li>Maximum Operating Temperature 90ºC (194ºF) continuous; overload rating 130ºC (266ºF)</li><li>Net Weight (Metric) 213 g</li><li>Product Series 2123</li><li>Product Type Resin</li><li>Resin Matrix Filled</li><li>Storage Time in Months 36</li><li>Voltage 1 kV</li><li>Voltage Application Low Voltage</li></ul>

<h3>3M 2131-B Compound Flame Retardant 210GM</h3>
Desc :
3M™ Scotchcast™ Electrical Resin 2131 is a 2 part, flame retardant compound, useful for coating cable jackets when splicing or repairing mine and portable cables. This permanent, polyurethane, liquid type resin has a unique formulation used in rugged conditions. The high dielectric strength offers a very good electrical insulating property to the resin
3M™ Scotchcast™ Flame Retardant Resin 2131 has low gel point rating to ensure curing at room temperature. The high tensile strength of the resin exhibits a semi flexible property and good adhesion property after curing. It is ideal for applications that need excellent thermal shock and mechanical shock resistance. It has a high flash point, helping prevent any fire hazard due to quick ignition. The flame retardant resin allows you to insulate cable splices operating up to 1 kV and to seal the crotch or sheath when terminating multi core cables. ASTM and MSHA Approved, RoHS 2011/65/EU Compliant.
Technical Spec :
<ul>
<li>Applications Sealing, electrical insulation and mechanical protection</li>
<li>Brands Scotchcast™</li>
<li>Cure Method Room</li>
<li>Dielectric Strength (V/mil) 343 V/mil</li>
<li>Elongation 3.39 Percent</li>
<li>Flexibility Flexible</li>
<li>Form Liquid</li>
<li>Gel Time 17 min @ 73 °F (23 °C)</li>
<li>Hardness 82 Shore A</li>
<li>Material Polyurethane</li>
<li>Maximum Operating Temperature 90ºC (194ºF) continuous; overload rating 130ºC (266ºF)</li>
<li>Net Weight (Metric) 213 g</li>
<li>Product Series 2123</li>
<li>Product Type Resin</li>
<li>Resin Matrix Filled</li>
<li>Storage Time in Months 36</li>
<li>Voltage 1 kV</li>
<li>Voltage Application Low Voltage</li>
</ul>

Jimmy Foo

Philips

Thomas & Betts

Bussmann

Weidmuller

FUJI

MILWAUKEE TOOL

Fuses & Fusegear

Contactors

Plugs & Connector 

Light Bulbs

Led Lights

Circuit Breaker

Pilot Lights

Other Electrical Accessories

Doreen Tan

3M 2131-B Compound Flame Retardant 210GM

3m 2131-b compound flame retardant 210gm senyawa tahan api workplace safety keselamatan tempat kerja 复合阻燃剂 工作场所安全

3m-2131-b-compound-flame-retardant-210gm

This is a single-component, versatile, acetic-cure silicone sealant designed for general-purpose glazing and sealing applications requiring long-term reliability. It forms a durable, flexible, and waterproof seal on a wide range of commonly used wet-area building materials. Suitable for both indoor and outdoor use, it is ideal for bonding, sealing, repairing, mending, and securing materials such as glass, metal, fabric, vinyl, plastics, weather-stripping, and vinyl tops.

Application Temperature: -20 °C to 50 °C

#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #RTVSealant #BS8130

This is a single-component, versatile, acetic-cure silicone sealant designed for general-purpose glazing and sealing applications requiring long-term reliability. It forms a durable, flexible, and waterproof seal on a wide range of commonly used wet-area building materials. Suitable for both indoor and outdoor use, it is ideal for bonding, sealing, repairing, mending, and securing materials such as glass, metal, fabric, vinyl, plastics, weather-stripping, and vinyl tops.Product Specifications:<ul class="md-block-unordered-list-item"><li>Curing System: Acetoxy</li><li>Appearance: Paste</li><li>Odor: Vinegar-like</li><li>Specific Gravity: 1.06</li><li>Curing Time (t=5mm): 2 days</li><li>Shore A Hardness: ≥18</li><li>Tensile at Break: ≥1.2 MPa</li><li>Elongation at Break: ≥300%</li><li>Application Temperature: -20 °C to 50 °C</li><li>Service Temperature: Up to 150 °C</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #RTVSealant #BS8130

This is a single-component, versatile, acetic-cure silicone sealant designed for general-purpose glazing and sealing applications requiring long-term reliability. It forms a durable, flexible, and waterproof seal on a wide range of commonly used wet-area building materials. Suitable for both indoor and outdoor use, it is ideal for bonding, sealing, repairing, mending, and securing materials such as glass, metal, fabric, vinyl, plastics, weather-stripping, and vinyl tops.
Product Specifications:
<ul>
<li>Curing System: Acetoxy</li>
<li>Appearance: Paste</li>
<li>Odor: Vinegar-like</li>
<li>Specific Gravity: 1.06</li>
<li>Curing Time (t=5mm): 2 days</li>
<li>Shore A Hardness: ≥18</li>
<li>Tensile at Break: ≥1.2 MPa</li>
<li>Elongation at Break: ≥300%</li>
<li>Application Temperature: -20 °C to 50 °C</li>
<li>Service Temperature: Up to 150 °C</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #RTVSealant #BS8130

Bossil Clear Rtv Sealant 8130 Single Component Acetic-Cure Silicone

bossil clear rtv sealant 8130 single component acetic-cure silicone silikon pengawet asetat komponen tunggal adhesive glue lem perekat penawar asetik gam pelekat bossil/博西尔 密封剂 单组分醋酸固化硅胶 胶水 博西尔

bossil-clear-rtv-sealant-8130-single-component-acetic-cure-silicone

75gm (2.64oz)

A fast-setting, non-shrinking clear epoxy adhesive with high mechanical strength, reliable heat resistance, and excellent chemical resistance. It is easy to machine, non-conductive, and can be handled within 2 hours. Ideal for bonding metal, wood, plastic, ceramics, brick, glassware, tools, and fiberglass repairs.

Appearance: Clear viscous liquid (Resin)
                           Slightly yellow liquid (Hardener)

Viscosity at 25 °C (LV4, 0.5 rpm) ASTM 2196: 6,000 – 11,000 cPs (Resin)
                                                                                                9,000 - 12,000 cPs (Hardener)

Lap shear strength: (N/mm2) ASTM D1002: Minimum 12

Hardness (Shore D) ASTM D2240: Minimum 70

#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #4MinutesSteelEpoxy #BS8140

A fast-setting, non-shrinking clear epoxy adhesive with high mechanical strength, reliable heat resistance, and excellent chemical resistance. It is easy to machine, non-conductive, and can be handled within 2 hours. Ideal for bonding metal, wood, plastic, ceramics, brick, glassware, tools, and fiberglass repairs.Product Specifications:<ul class="md-block-unordered-list-item"><li>Appearance: Clear viscous liquid (Resin) Slightly yellow liquid (Hardener)</li><li>Viscosity at 25 °C (LV4, 0.5 rpm) ASTM 2196: 6,000 – 11,000 cPs (Resin) 9,000 - 12,000 cPs (Hardener)</li><li>Main ingredients: Epoxy resin Polymercaptan hardener</li><li>Mixing ratio: 1:1 (by volume &amp; weight)</li><li>Lap shear strength: (N/mm2) ASTM D1002: Minimum 12</li><li>Hardness (Shore D) ASTM D2240: Minimum 70</li><li>Working time at 25 °C: &lt; 3 minutes</li><li>100% Curing time at 25 °C: 24 hours</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #4MinutesSteelEpoxy #BS8140

A fast-setting, non-shrinking clear epoxy adhesive with high mechanical strength, reliable heat resistance, and excellent chemical resistance. It is easy to machine, non-conductive, and can be handled within 2 hours. Ideal for bonding metal, wood, plastic, ceramics, brick, glassware, tools, and fiberglass repairs.
Product Specifications:
<ul>
<li>Appearance: Clear viscous liquid (Resin) 
 Slightly yellow liquid (Hardener)</li>
<li>Viscosity at 25 °C (LV4, 0.5 rpm) ASTM 2196: 6,000 – 11,000 cPs (Resin) 
 9,000 - 12,000 cPs (Hardener)</li>
<li>Main ingredients: Epoxy resin 
 Polymercaptan hardener</li>
<li>Mixing ratio: 1:1 (by volume &amp; weight)</li>
<li>Lap shear strength: (N/mm2) ASTM D1002: Minimum 12</li>
<li>Hardness (Shore D) ASTM D2240: Minimum 70</li>
<li>Working time at 25 °C: &lt; 3 minutes</li>
<li>100% Curing time at 25 °C: 24 hours</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #4MinutesSteelEpoxy #BS8140

Bossil 4 Minutes 3 Ton Epoxy Fast Setting 8141 Made in Malaysia

bossil minutes ton epoxy fast setting 8141 made malaysia buatan adhesive glue lem perekat minit tan gam pelekat bossil/博西尔 分钟 吨环氧速凝剂 马来西亚制造 胶水 博西尔

bossil-4-minutes-3-ton-epoxy-fast-setting-8141-made-in-malaysia

28.4gm (1oz)

SealXpert Aluminium Repair Liquid is an aluminium-filled, pourable epoxy for making moulds, patterns, and holding fixtures that can be machined, drilled, or tapped.

Used for mould-making, patterns, holding fixtures, levelling equipment.

SealXpert Aluminium Repair Liquid is an aluminium-filled, pourable epoxy for making moulds, patterns, and holding fixtures that can be machined, drilled, or tapped.<h3 class="md-block-header-three">Typical Applications:</h3><ul class="md-block-unordered-list-item"><li>Used for mould-making, patterns, holding fixtures, levelling equipment.</li></ul><h3 class="md-block-header-three"> Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: SealXpert</li><li>Product Type: Repair Liquid</li><li>Adhesive Tensile Shear: 18.6 MPa</li><li>Tensile Strength: -</li><li>Compressive Strength: 67.7 MPa</li><li>Modulus of Elasticity: 5170 MPa</li><li>Dielectric Strength: 1000 volts/mm</li><li>Flexural Strength: 49.5 MPa</li><li>Hardness: 85 Shore D</li></ul>

SealXpert Aluminium Repair Liquid is an aluminium-filled, pourable epoxy for making moulds, patterns, and holding fixtures that can be machined, drilled, or tapped.
<h3>Typical Applications:</h3>
<ul>
<li>Used for mould-making, patterns, holding fixtures, levelling equipment.</li>
</ul>
<h3>&nbsp;Specification:</h3>
<ul>
<li>Brand: SealXpert</li>
<li>Product Type: Repair Liquid</li>
<li>Adhesive Tensile Shear: 18.6 MPa</li>
<li>Tensile Strength: -</li>
<li>Compressive Strength: 67.7 MPa</li>
<li>Modulus of Elasticity: 5170 MPa</li>
<li>Dielectric Strength: 1000 volts/mm</li>
<li>Flexural Strength: 49.5 MPa</li>
<li>Hardness: 85 Shore D</li>
</ul>

BRIGHTMAX

WRAP SEAL

KOLOR KUT

Clamps

Lubricants

Threadlocker

Sealants

Hand Cleaners

Grease

Retaining Compound

Sealxpert PL103 Aluminium Repair Liquid (500g)

sealxpert pl103 aluminium repair liquid (500g) cairan perbaikan putty dempul cecair pembaikan pakal sealxpert/密封件 铝修复液 油灰 密封件

sealxpert-pl103-aluminium-repair-liquid-500g

Appearance: : Clear liquid (Resin)
                             Clear amber liquid (Hardener)

Viscosity at 25 °C (LV4, 0.5 rpm) ASTM 2196: 6,000 - 11,000 cPs (Resin)                                                                                                
                                                                                                20,000 - 30,000 cPs (Hardener)

Main ingredients: Epoxy resin
                                       Polyamide hardener

Tensile lap shear strength (N/mm2) ASTM D1002: Minimum 11

Hardness (Shore D) ASTM D2240: Minimum 75

#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #3TonEpoxy #BS8143

A fast-setting, non-shrinking clear epoxy adhesive with high mechanical strength, reliable heat resistance, and excellent chemical resistance. It is easy to machine, non-conductive, and can be handled within 2 hours. Ideal for bonding metal, wood, plastic, ceramics, brick, glassware, tools, and fiberglass repairs.Product Specifications:<ul class="md-block-unordered-list-item"><li>Appearance: : Clear liquid (Resin) Clear amber liquid (Hardener)</li><li>Viscosity at 25 °C (LV4, 0.5 rpm) ASTM 2196: 6,000 - 11,000 cPs (Resin) 20,000 - 30,000 cPs (Hardener)</li><li>Main ingredients: Epoxy resin Polyamide hardener</li><li>Mixing ratio: 1:1 (by volume &amp; weight)</li><li>Tensile lap shear strength (N/mm2) ASTM D1002: Minimum 11</li><li>Hardness (Shore D) ASTM D2240: Minimum 75</li><li>Working time at 25 °C: 90 - 180 minutes</li><li>100% Curing time at 25 °C: 72 hours</li></ul>#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #3TonEpoxy #BS8143

A fast-setting, non-shrinking clear epoxy adhesive with high mechanical strength, reliable heat resistance, and excellent chemical resistance. It is easy to machine, non-conductive, and can be handled within 2 hours. Ideal for bonding metal, wood, plastic, ceramics, brick, glassware, tools, and fiberglass repairs.
Product Specifications:
<ul>
<li>Appearance: : Clear liquid (Resin) 
 Clear amber liquid (Hardener)</li>
<li>Viscosity at 25 °C (LV4, 0.5 rpm) ASTM 2196: 6,000 - 11,000 cPs (Resin) 
 20,000 - 30,000 cPs (Hardener)</li>
<li>Main ingredients: Epoxy resin 
 Polyamide hardener</li>
<li>Mixing ratio: 1:1 (by volume &amp; weight)</li>
<li>Tensile lap shear strength (N/mm2) ASTM D1002: Minimum 11</li>
<li>Hardness (Shore D) ASTM D2240: Minimum 75</li>
<li>Working time at 25 °C: 90 - 180 minutes</li>
<li>100% Curing time at 25 °C: 72 hours</li>
</ul>
#DHES #hardwarestore #hardware #hardwareshop #diyproject #powertool #homerenovation #interiordesign #homedecors #hellosingapore #renotalk #hardwarezone #Bossil #3TonEpoxy #BS8143