FORCE

NEW PIG

WESTWARD

Safety

safety

Hazmat

hazmat

Mechanical Parts

mechanical-parts

O Ring

o-ring

Spanners & Sockets

spanners-sockets

Torx Keys & Sets

torx-keys-sets

Welding Equipment

welding-equipment

Welding Accessories

welding-accessories

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS230 ID 63.02 x CS 3.53Material : Nitrile (NBR) 70 ShoreAdditional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS230
&nbsp;ID 63.02 x CS 3.53
Material : Nitrile (NBR) 70 Shore
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:bngab"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/_O~cEOrdxc9kN4gkTcDrvz.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="bngab" 
 layout="nodisplay"></amp-image-lightbox>

John

Others

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

buyerIntroduction

ORING AS568 AS230 ID 63.02 x CS 3.53 Nitrile (NBR) 70 Shore

oring as568 as230 id 63.02 cs 3.53 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 3.53丁腈（nbr）70肖氏 o型圈 oem代工

oring-as568-as230-id-63-02-x-cs-3-53-nitrile-nbr-70-shore

ORING AS568 AS244 ID 107.54 x CS 3.53Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS244&nbsp;
ID 107.54 x CS 3.53
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS244 ID 107.54 x CS 3.53 Nitrile (NBR) 90 Shore

oring as568 as244 id 107.54 cs 3.53 nitrile (nbr) 90 shore ring o-ring oem gelang oem/oem代工 3.53腈（nbr）90肖氏 o型圈 oem代工

oring-as568-as244-id-107-54-x-cs-3-53-nitrile-nbr-90-shore

ORING AS568 AS243 ID 104.37 x CS 3.53Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS243
&nbsp;ID 104.37 x CS 3.53
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:2mv6b"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/bddd4GmCYttMWoAq8oDEJw.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="2mv6b" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS243 ID 104.37 x CS 3.53 Nitrile (NBR) 90 Shore

oring as568 as243 id 104.37 cs 3.53 nitrile (nbr) 90 shore 104,37 3,53 ring o-ring oem gelang oem/oem代工 3.53丁腈（nbr）90肖氏 o型圈 oem代工

oring-as568-as243-id-104-37-x-cs-3-53-nitrile-nbr-90-shore

Force 76755G Star Tamperproof Grip Key T-55H (dual Material)

Engineered for precision, this dual-material grip key is designed for T-55 H star tamperproof screws. Offers enhanced grip and control for secure fastening. A must-have for professionals and DIYers alike      

<h3 class="md-block-header-three">Force 76755G Star Tamperproof Grip Key T-55H (dual Material)</h3>Engineered for precision, this dual-material grip key is designed for T-55 H star tamperproof screws. Offers enhanced grip and control for secure fastening. A must-have for professionals and DIYers alike

<h3>Force 76755G Star Tamperproof Grip Key T-55H (dual Material)</h3>
Engineered for precision, this dual-material grip key is designed for T-55 H star tamperproof screws. Offers enhanced grip and control for secure fastening. A must-have for professionals and DIYers alike&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

ELORA

SATA

Nexus

Impact Sockets

Sockets

Ring Spanners

Socket Sets

Flank Sockets

Open End Spanners

Combination Spanners

Hex Keys & Sets

Screwdrivers

Screwdriver Bits & Bit Set

Mr Jones Ong

force 76755g star tamperproof grip key t-55h (dual material) (bahan ganda) torx keys sets kunci set (dwi bahan) tork force/力量 星型防篡改握把钥匙 t-55h（双材质） 梅花键和套 力量

force-76755g-star-tamperproof-grip-key-t-55h-dual-material

New Pig Grippy Adhesive-Backed Absorbent Mat 1 Roll MAT1625

Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.

Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery

Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive

Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring

Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it's saturated or shows signs of wear

Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water

Traps oil, grease and grime to keep them from being tracked around; ideal for oily areas near machines and equipment

16” width is great for lining workbenches, countertops and toolboxes

Leakproof backing prevents absorbed liquid from soaking through to the floor

Dark colour hides grime so the mat looks cleaner longer

Easy to cut and install: just roll it out, stick it down and smooth it out

Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%

Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents

Flammability Specifications: Flame Resistant - Will melt and self-extinguish

Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal

Recycled Content: 25% or more Recycled Content

Industry: Industrial Facilities; Shops & Garages

Storage Temp Range: Store between 32°F and 120°F

Temperature Limit: Surface temps from 55°F to 120°F

Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material

<h3 class="md-block-header-three">New Pig Grippy Adhesive-Backed Absorbent Mat 1 Roll MAT1625</h3>Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery</li><li>Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive</li><li>Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring</li><li>Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it&#x27;s saturated or shows signs of wear</li><li>Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water</li><li>Traps oil, grease and grime to keep them from being tracked around; ideal for oily areas near machines and equipment</li><li>16” width is great for lining workbenches, countertops and toolboxes</li><li>Leakproof backing prevents absorbed liquid from soaking through to the floor</li><li>Dark colour hides grime so the mat looks cleaner longer</li><li>Easy to cut and install: just roll it out, stick it down and smooth it out</li><li>Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%</li><li>Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: New Pig</li><li>Product Type: Grippy Universal Mat</li><li>Antimicrobial: No</li><li>Traffic: Medium Foot Traffic</li><li>Backing Material: Adhesive-Backed</li><li>Indoor/Outdoor: Indoor Use</li><li>Incinerable: Yes</li><li>Flammability Specifications: Flame Resistant - Will melt and self-extinguish</li><li>Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal</li><li>Colour: Blue</li><li>Dimensions: 16 inch W x 25 feet L</li><li>Mat Weight: Mediumweight</li><li>Recycled Content: 25% or more Recycled Content</li><li>Absorbency: Up to 1.3 gal. per roll</li><li>Core Diameter: 3 inch</li><li>Industry: Industrial Facilities; Shops &amp; Garages</li><li>Perforated: No</li><li>Storage Temp Range: Store between 32°F and 120°F</li><li>Temperature Limit: Surface temps from 55°F to 120°F</li><li>Walking Surface: Absorbent Top</li><li>Sold as: 1 roll</li><li>Weight: 1.92 kg</li><li># per Pallet: 130</li><li>Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material</li><li>UNSPSC: 47131901</li><li>UV Resistant: No</li></ul>

<h3>New Pig Grippy Adhesive-Backed Absorbent Mat 1 Roll MAT1625</h3>
Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.
<h3>Features:</h3>
<ul>
<li>Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery</li>
<li>Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive</li>
<li>Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring</li>
<li>Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it's saturated or shows signs of wear</li>
<li>Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water</li>
<li>Traps oil, grease and grime to keep them from being tracked around; ideal for oily areas near machines and equipment</li>
<li>16” width is great for lining workbenches, countertops and toolboxes</li>
<li>Leakproof backing prevents absorbed liquid from soaking through to the floor</li>
<li>Dark colour hides grime so the mat looks cleaner longer</li>
<li>Easy to cut and install: just roll it out, stick it down and smooth it out</li>
<li>Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%</li>
<li>Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: New Pig</li>
<li>Product Type: Grippy Universal Mat</li>
<li>Antimicrobial: No</li>
<li>Traffic: Medium Foot Traffic</li>
<li>Backing Material: Adhesive-Backed</li>
<li>Indoor/Outdoor: Indoor Use</li>
<li>Incinerable: Yes</li>
<li>Flammability Specifications: Flame Resistant - Will melt and self-extinguish</li>
<li>Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal</li>
<li>Colour: Blue</li>
<li>Dimensions: 16 inch W x 25 feet L</li>
<li>Mat Weight: Mediumweight</li>
<li>Recycled Content: 25% or more Recycled Content</li>
<li>Absorbency: Up to 1.3 gal. per roll</li>
<li>Core Diameter: 3 inch</li>
<li>Industry: Industrial Facilities; Shops &amp; Garages</li>
<li>Perforated: No</li>
<li>Storage Temp Range: Store between 32°F and 120°F</li>
<li>Temperature Limit: Surface temps from 55°F to 120°F</li>
<li>Walking Surface: Absorbent Top</li>
<li>Sold as: 1 roll</li>
<li>Weight: 1.92 kg</li>
<li># per Pallet: 130</li>
<li>Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material</li>
<li>UNSPSC: 47131901</li>
<li>UV Resistant: No</li>
</ul>

brian

WORKSAFE

Bata Industrials

MASTER LOCK

Martor

NEUKING

Workgard

Slice

Safety Shoes

Safety Gloves

Padlocks & Lockout Devices

Respiratory Protection

Protective Suits

Safety Goggles

Body Protection

Cutters

Eileen Soh

New Pig Grippy Adhesive-backed Absorbent Mat 1 Roll MAT1625

new pig grippy adhesive-backed absorbent mat roll mat1625 penyerap perekat yang didukung babi baru hazmat pekat disokong dengan pelekat pig/新猪 新的猪胶粘剂背胶吸水垫1卷mat1625 危险品 新猪

new-pig-grippy-adhesive-backed-absorbent-mat-1-roll-mat1625

Westward 31GG68 K4442 Welding Electrode BD-7000 1/8in.D 5lb 

For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel
 

Rockwell Hardness: 55 to 60 HRC (As Welded)

<h3 class="md-block-header-three">Westward 31GG68 K4442 Welding Electrode BD-7000 1/8in.D 5lb </h3><ul class="md-block-unordered-list-item"><li>Product Code: K4442 </li><li>Hardfacing Stick Electrode </li><li>Process: Stick Welding (SMAW) </li><li>Alloy Type: Abrasion, Impact </li><li>For Welding Position: Flat, Horizontal </li><li>Overall Diameter: 1/8 in </li><li>Overall Length: 14 in </li><li>Series: BD7000 </li><li>Weight: 5 lb </li><li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel </li><li>Welding Current Designation: AC, DCEP </li><li>Container Type: Cardboard Carton </li><li>Rockwell Hardness: 55 to 60 HRC (As Welded)</li></ul>

<h3>Westward 31GG68 K4442 Welding Electrode BD-7000 1/8in.D 5lb&nbsp;</h3>
<ul>
<li>Product Code: K4442 
&nbsp;</li>
<li>Hardfacing Stick Electrode 
&nbsp;</li>
<li>Process: Stick Welding (SMAW) 
&nbsp;</li>
<li>Alloy Type: Abrasion, Impact 
&nbsp;</li>
<li>For Welding Position: Flat, Horizontal 
&nbsp;</li>
<li>Overall Diameter: 1/8 in 
&nbsp;</li>
<li>Overall Length: 14 in 
&nbsp;</li>
<li>Series: BD7000 
&nbsp;</li>
<li>Weight: 5 lb 
&nbsp;</li>
<li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel 
&nbsp;</li>
<li>Welding Current Designation: AC, DCEP 
&nbsp;</li>
<li>Container Type: Cardboard Carton 
&nbsp;</li>
<li>Rockwell Hardness: 55 to 60 HRC (As Welded)</li>
</ul>

Grainger

Westward 31GG68 K4442 Welding Electrode BD-7000 1/8in.D 5lb

westward 31gg68 k4442 welding electrode bd-7000 1/8in.d 5lb elektroda las accessories aksesoris pengelasan ke arah barat elektrod kimpalan aksesori westward/向西 焊接焊条 1/8英寸直径 5磅 焊接配件 向西

westward-31gg68-k4442-welding-electrode-bd-7000-1-8in-d-5lb

Westward 31GG70 K4442 Welding Electrode BD-7000 3/32in.D 5lb 

<h3 class="md-block-header-three">Westward 31GG70 K4442 Welding Electrode BD-7000 3/32in.D 5lb </h3><ul class="md-block-unordered-list-item"><li>Product Code: K4442 </li><li>Hardfacing Stick Electrode </li><li>Process: Stick Welding (SMAW) </li><li>Alloy Type: Abrasion, Impact </li><li>For Welding Position: Flat, Horizontal </li><li>Overall Diameter: 3/32 in </li><li>Overall Length: 14 in </li><li>Series: BD7000 </li><li>Weight: 5 lb </li><li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel </li><li>Welding Current Designation: AC, DCEP </li><li>Container Type: Cardboard Carton </li><li>Rockwell Hardness: 55 to 60 HRC (As Welded)</li></ul>

<h3>Westward 31GG70 K4442 Welding Electrode BD-7000 3/32in.D 5lb&nbsp;</h3>
<ul>
<li>Product Code: K4442 
&nbsp;</li>
<li>Hardfacing Stick Electrode 
&nbsp;</li>
<li>Process: Stick Welding (SMAW) 
&nbsp;</li>
<li>Alloy Type: Abrasion, Impact 
&nbsp;</li>
<li>For Welding Position: Flat, Horizontal 
&nbsp;</li>
<li>Overall Diameter: 3/32 in 
&nbsp;</li>
<li>Overall Length: 14 in 
&nbsp;</li>
<li>Series: BD7000 
&nbsp;</li>
<li>Weight: 5 lb 
&nbsp;</li>
<li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel 
&nbsp;</li>
<li>Welding Current Designation: AC, DCEP 
&nbsp;</li>
<li>Container Type: Cardboard Carton 
&nbsp;</li>
<li>Rockwell Hardness: 55 to 60 HRC (As Welded)</li>
</ul>

Westward 31GG70 K4442 Welding Electrode BD-7000 3/32in.D 5lb

westward 31gg70 k4442 welding electrode bd-7000 3/32in.d 5lb elektroda las accessories aksesoris pengelasan ke arah barat elektrod kimpalan aksesori westward/向西 焊接焊条 3/32英寸d 5磅 焊接配件 向西

westward-31gg70-k4442-welding-electrode-bd-7000-3-32in-d-5lb

Westward 31GH40 Welding Electrode HC470 5/32in.D 5lb 

Welding Current Designation: AC, DCEN, DCEP
 

<h3 class="md-block-header-three">Westward 31GH40 Welding Electrode HC470 5/32in.D 5lb </h3><ul class="md-block-unordered-list-item"><li>Hardfacing Stick Electrode </li><li>Process: Stick Welding (SMAW) </li><li>Alloy Type: Severe Abrasion </li><li>For Welding Position: Flat, Horizontal </li><li>Overall Diameter: 5/32 in </li><li>Overall Length: 14 in </li><li>Series: HardCover 470 </li><li>Weight: 5 lb </li><li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel </li><li>Welding Current Designation: AC, DCEN, DCEP </li><li>Container Type: Cardboard Carton </li><li>Rockwell Hardness: 55 to 60 HRC (As Welded)</li></ul>

<h3>Westward 31GH40 Welding Electrode HC470 5/32in.D 5lb&nbsp;</h3>
<ul>
<li>Hardfacing Stick Electrode 
&nbsp;</li>
<li>Process: Stick Welding (SMAW) 
&nbsp;</li>
<li>Alloy Type: Severe Abrasion 
&nbsp;</li>
<li>For Welding Position: Flat, Horizontal 
&nbsp;</li>
<li>Overall Diameter: 5/32 in 
&nbsp;</li>
<li>Overall Length: 14 in 
&nbsp;</li>
<li>Series: HardCover 470 
&nbsp;</li>
<li>Weight: 5 lb 
&nbsp;</li>
<li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel 
&nbsp;</li>
<li>Welding Current Designation: AC, DCEN, DCEP 
&nbsp;</li>
<li>Container Type: Cardboard Carton 
&nbsp;</li>
<li>Rockwell Hardness: 55 to 60 HRC (As Welded)</li>
</ul>

Westward 31GH40 Welding Electrode HC470 5/32in.D 5lb

westward 31gh40 welding electrode hc470 5/32in.d 5lb elektroda las accessories aksesoris pengelasan ke arah barat elektrod kimpalan aksesori westward/向西 焊接焊条 5/32 英寸直径 焊接配件 向西

westward-31gh40-welding-electrode-hc470-5-32in-d-5lb

Westward 31GH39 Welding Electrode HC470 3/16in.D 5lb 

Rockwell Hardness: 55 to 60 HRC (As Welded)
 

<h3 class="md-block-header-three">Westward 31GH39 Welding Electrode HC470 3/16in.D 5lb </h3><ul class="md-block-unordered-list-item"><li>Hardfacing Stick Electrode </li><li>Process: Stick Welding (SMAW) </li><li>Alloy Type: Severe Abrasion </li><li>For Welding Position: Flat, Horizontal </li><li>Overall Diameter: 3/16 in </li><li>Overall Length: 14 in </li><li>Series: HardCover 470 </li><li>Weight: 5 lb </li><li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel </li><li>Welding Current Designation: AC, DCEN, DCEP </li><li>Container Type: Cardboard Carton </li><li>Rockwell Hardness: 55 to 60 HRC (As Welded) </li></ul>

<h3>Westward 31GH39 Welding Electrode HC470 3/16in.D 5lb&nbsp;</h3>
<ul>
<li>Hardfacing Stick Electrode 
&nbsp;</li>
<li>Process: Stick Welding (SMAW) 
&nbsp;</li>
<li>Alloy Type: Severe Abrasion 
&nbsp;</li>
<li>For Welding Position: Flat, Horizontal 
&nbsp;</li>
<li>Overall Diameter: 3/16 in 
&nbsp;</li>
<li>Overall Length: 14 in 
&nbsp;</li>
<li>Series: HardCover 470 
&nbsp;</li>
<li>Weight: 5 lb 
&nbsp;</li>
<li>For Material Type: Carbon Steel, Cast Iron, Low-Alloy Steel, Manganese Steel, Stainless Steel 
&nbsp;</li>
<li>Welding Current Designation: AC, DCEN, DCEP 
&nbsp;</li>
<li>Container Type: Cardboard Carton 
&nbsp;</li>
<li>Rockwell Hardness: 55 to 60 HRC (As Welded) 
&nbsp;</li>
</ul>

Westward 31GH39 Welding Electrode HC470 3/16in.D 5lb

westward 31gh39 welding electrode hc470 3/16in.d 5lb elektroda las accessories aksesoris pengelasan ke arah barat elektrod kimpalan aksesori westward/向西 焊接焊条 3/16 英寸直径 焊接配件 向西

westward-31gh39-welding-electrode-hc470-3-16in-d-5lb

New Pig Mediumweight Grippy Adhesive-Backed Absorbent Mat MAT3250

Traps oil, grease and grime to keep them from being tracked around

32” x 50’ roll provides enough length to create continuous coverage and absorbency in oily areas near machines and equipment

<h3 class="md-block-header-three">New Pig Mediumweight Grippy Adhesive-Backed Absorbent Mat MAT3250</h3>Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery</li><li>Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive</li><li>Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring</li><li>Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it&#x27;s saturated or shows signs of wear</li><li>Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water</li><li>Traps oil, grease and grime to keep them from being tracked around</li><li>32” x 50’ roll provides enough length to create continuous coverage and absorbency in oily areas near machines and equipment</li><li>Leakproof backing prevents absorbed liquid from soaking through to the floor</li><li>Dark colour hides grime so the mat looks cleaner longer</li><li>Easy to cut and install: just roll it out, stick it down and smooth it out</li><li>Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%</li><li>Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: New Pig</li><li>Product Type: Universal Mat</li><li>Antimicrobial: No</li><li>Traffic: Medium Foot Traffic</li><li>Backing Material: Adhesive-Backed</li><li>Indoor/Outdoor: Indoor Use</li><li>Incinerable: Yes</li><li>Flammability Specifications: Flame Resistant - Will melt and self-extinguish</li><li>Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal</li><li>Colour: Blue</li><li>Dimensions: 32 inch W x 50 feet L</li><li>Mat Weight: Medium Weight</li><li>Recycled Content: 25% or more Recycled Content</li><li>Absorbency: Up to 5.25 gal. per roll</li><li>Core Diameter: 3 inch</li><li>Industry: Industrial Facilities; Shops &amp; Garages</li><li>Perforated: No</li><li>Storage Temp Range: Store between 32°F and 120°F</li><li>Temperature Limit: Surface temps from 55°F to 120°F</li><li>Walking Surface: Absorbent Top</li><li>Sold as: 1 roll</li><li>Weight: 5.44 kg</li><li>New Pig Patent: Patent Pending</li><li># per Pallet: 28</li><li>Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material</li><li>UNSPSC: 47131901</li><li>UV Resistant: No</li></ul>

<h3>New Pig Mediumweight Grippy Adhesive-Backed Absorbent Mat MAT3250</h3>
Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.
<h3>Features:</h3>
<ul>
<li>Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery</li>
<li>Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive</li>
<li>Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring</li>
<li>Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it's saturated or shows signs of wear</li>
<li>Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water</li>
<li>Traps oil, grease and grime to keep them from being tracked around</li>
<li>32” x 50’ roll provides enough length to create continuous coverage and absorbency in oily areas near machines and equipment</li>
<li>Leakproof backing prevents absorbed liquid from soaking through to the floor</li>
<li>Dark colour hides grime so the mat looks cleaner longer</li>
<li>Easy to cut and install: just roll it out, stick it down and smooth it out</li>
<li>Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%</li>
<li>Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: New Pig</li>
<li>Product Type: Universal Mat</li>
<li>Antimicrobial: No</li>
<li>Traffic: Medium Foot Traffic</li>
<li>Backing Material: Adhesive-Backed</li>
<li>Indoor/Outdoor: Indoor Use</li>
<li>Incinerable: Yes</li>
<li>Flammability Specifications: Flame Resistant - Will melt and self-extinguish</li>
<li>Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal</li>
<li>Colour: Blue</li>
<li>Dimensions: 32 inch W x 50 feet L</li>
<li>Mat Weight: Medium Weight</li>
<li>Recycled Content: 25% or more Recycled Content</li>
<li>Absorbency: Up to 5.25 gal. per roll</li>
<li>Core Diameter: 3 inch</li>
<li>Industry: Industrial Facilities; Shops &amp; Garages</li>
<li>Perforated: No</li>
<li>Storage Temp Range: Store between 32°F and 120°F</li>
<li>Temperature Limit: Surface temps from 55°F to 120°F</li>
<li>Walking Surface: Absorbent Top</li>
<li>Sold as: 1 roll</li>
<li>Weight: 5.44 kg</li>
<li>New Pig Patent: Patent Pending</li>
<li># per Pallet: 28</li>
<li>Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material</li>
<li>UNSPSC: 47131901</li>
<li>UV Resistant: No</li>
</ul>

New Pig Mediumweight Grippy Adhesive-backed Absorbent Mat MAT3250

new pig mediumweight grippy adhesive-backed absorbent mat mat3250 penyerap berperekat medium babi baru hazmat pig/新猪 新的猪中等重量的粘性背胶吸水垫mat3250 危险品 新猪

new-pig-mediumweight-grippy-adhesive-backed-absorbent-mat-mat3250

New Pig Grippy Adhesive-Backed Absorbent Mat MAT32100

32” x 100’ roll provides enough length to create continuous coverage and absorbency in oily areas near machines and equipment

<h3 class="md-block-header-three">New Pig Grippy Adhesive-Backed Absorbent Mat MAT32100</h3>Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery</li><li>Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive</li><li>Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring</li><li>Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it&#x27;s saturated or shows signs of wear</li><li>Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water</li><li>Traps oil, grease and grime to keep them from being tracked around</li><li>32” x 100’ roll provides enough length to create continuous coverage and absorbency in oily areas near machines and equipment</li><li>Leakproof backing prevents absorbed liquid from soaking through to the floor</li><li>Dark colour hides grime so the mat looks cleaner longer</li><li>Easy to cut and install: just roll it out, stick it down and smooth it out</li><li>Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%</li><li>Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: New Pig</li><li>Product Type: Universal Mat</li><li>Antimicrobial: No</li><li>Traffic: Medium Foot Traffic</li><li>Backing Material: Adhesive-Backed</li><li>Indoor/Outdoor: Indoor Use</li><li>Incinerable: Yes</li><li>Flammability Specifications: Flame Resistant - Will melt and self-extinguish</li><li>Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal</li><li>Colour: Blue</li><li>Dimensions: 32 inch W x 100 feet L</li><li>Mat Weight: Medium Weight</li><li>Recycled Content: 25% or more Recycled Content</li><li>Absorbency: Up to 10.5 gal. per roll</li><li>Core Diameter: 3 inch</li><li>Industry: Industrial Facilities; Shops &amp; Garages</li><li>Perforated: No</li><li>Storage Temp Range: Store between 32°F and 120°F</li><li>Temperature Limit: Surface temps from 55°F to 120°F</li><li>Walking Surface: Absorbent Top</li><li>Sold as: 1 roll</li><li>Weight: 12.25 kg</li><li>New Pig Patent: Patent Pending</li><li># per Pallet: 13</li><li>Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material</li><li>UNSPSC: 47131901</li><li>UV Resistant: No</li></ul>

<h3>New Pig Grippy Adhesive-Backed Absorbent Mat MAT32100</h3>
Make the switch to the mat that sticks! Absorbent runner helps prevent slips, trips and falls around workstations and walkways near machinery in industrial facilities.
<h3>Features:</h3>
<ul>
<li>Adhesive-backed absorbent mat stays exactly where you put it with no shifting, bunching up or flipping over to prevent slips, trips and falls in workstations and around machinery</li>
<li>Proprietary adhesive sticks to the floor with a super-tight grip, but peels up easily for quick changeouts; reduces clean-up time to make your facility more productive</li>
<li>Sticks to most commercial floor surfaces including concrete, VCT, linoleum, ceramic tile, quarry tile and laminate flooring</li>
<li>Tough, spunbond top layer with heavy-duty zigzag stitching stands up to foot and light-wheeled traffic; keep mat in service until it's saturated or shows signs of wear</li>
<li>Eight layers of fine-fiber polypropylene safely absorb leaks, drips and overspray of oils, coolants, solvents and water</li>
<li>Traps oil, grease and grime to keep them from being tracked around</li>
<li>32” x 100’ roll provides enough length to create continuous coverage and absorbency in oily areas near machines and equipment</li>
<li>Leakproof backing prevents absorbed liquid from soaking through to the floor</li>
<li>Dark colour hides grime so the mat looks cleaner longer</li>
<li>Easy to cut and install: just roll it out, stick it down and smooth it out</li>
<li>Tested and Certified by the National Floor Safety Institute (NFSI): when used as part of your floor safety program, high-traction surfaces such as PIG Grippy Absorbent Mat have been proven to reduce slip-and-fall claims by as much as 90%</li>
<li>Mats take on the properties of absorbed liquids - always take proper precautions when handling saturated absorbents</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: New Pig</li>
<li>Product Type: Universal Mat</li>
<li>Antimicrobial: No</li>
<li>Traffic: Medium Foot Traffic</li>
<li>Backing Material: Adhesive-Backed</li>
<li>Indoor/Outdoor: Indoor Use</li>
<li>Incinerable: Yes</li>
<li>Flammability Specifications: Flame Resistant - Will melt and self-extinguish</li>
<li>Fluid Absorbed: Oils, Coolants, Solvents, Water – Universal</li>
<li>Colour: Blue</li>
<li>Dimensions: 32 inch W x 100 feet L</li>
<li>Mat Weight: Medium Weight</li>
<li>Recycled Content: 25% or more Recycled Content</li>
<li>Absorbency: Up to 10.5 gal. per roll</li>
<li>Core Diameter: 3 inch</li>
<li>Industry: Industrial Facilities; Shops &amp; Garages</li>
<li>Perforated: No</li>
<li>Storage Temp Range: Store between 32°F and 120°F</li>
<li>Temperature Limit: Surface temps from 55°F to 120°F</li>
<li>Walking Surface: Absorbent Top</li>
<li>Sold as: 1 roll</li>
<li>Weight: 12.25 kg</li>
<li>New Pig Patent: Patent Pending</li>
<li># per Pallet: 13</li>
<li>Composition: Absorbent - Polypropylene Stitching - Polyester Adhesive Backing - Proprietary Adhesive Material</li>
<li>UNSPSC: 47131901</li>
<li>UV Resistant: No</li>
</ul>