FLUKE

Test & Measurement

test-measurement

Calibrators

calibrators

Electrical Power Testing

electrical-power-testing

Other Measuring Tools

other-measuring-tools

Pressure Measurement

pressure-measurement

Fluke FLUKE-710 Ma Loop, Valve Tester, W/HART 

HART Communication Support: Allows the sourcing of a 4-20 mA signal to move the smart control valve while monitoring the valve’s HART feedback signal to ensure correct positioning.
 

Valve Health Quick-Check: Provides at-a-glance diagnostics, showing whether the valve is in good, marginal, or bad operating condition for faster decision-making on maintenance.
 

Built-In Test Procedures: Includes pre-configured tests for valve signature, speed, step, manual, and bump/partial stroke tests to simplify valve evaluation.
 

Comprehensive mA Loop Functions: Supports mA source, simulate, read, read/loop power, and volts read for full loop calibration and control.
 

Pressure Measurement: Monitors the pressure delivered from the valve’s internal I/P to provide a complete understanding of valve operation through HART feedback.
 

Intuitive User Interface: The easy-to-use interface and automatic adjustments (such as changing mA signals) simplify testing and ensure precise results.
 

ValveTrack™ Software Compatibility: Enables the upload of recorded valve measurements to a PC for more detailed analysis and documentation of valve health over time.

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke FLUKE-710 Ma Loop, Valve Tester, W/HART</strong> </h3><p class="md-block-unstyled"><strong class="md-inline-bold">Key Features and Benefits:</strong></p><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">HART Communication Support:</strong> Allows the sourcing of a 4-20 mA signal to move the smart control valve while monitoring the valve’s HART feedback signal to ensure correct positioning.<br/> </li><li><strong class="md-inline-bold">Valve Health Quick-Check:</strong> Provides at-a-glance diagnostics, showing whether the valve is in good, marginal, or bad operating condition for faster decision-making on maintenance.<br/> </li><li><strong class="md-inline-bold">Built-In Test Procedures:</strong> Includes pre-configured tests for valve signature, speed, step, manual, and bump/partial stroke tests to simplify valve evaluation.<br/> </li><li><strong class="md-inline-bold">Comprehensive mA Loop Functions:</strong> Supports mA source, simulate, read, read/loop power, and volts read for full loop calibration and control.<br/> </li><li><strong class="md-inline-bold">Pressure Measurement:</strong> Monitors the pressure delivered from the valve’s internal I/P to provide a complete understanding of valve operation through HART feedback.<br/> </li><li><strong class="md-inline-bold">Intuitive User Interface:</strong> The easy-to-use interface and automatic adjustments (such as changing mA signals) simplify testing and ensure precise results.<br/> </li><li><strong class="md-inline-bold">ValveTrack™ Software Compatibility:</strong> Enables the upload of recorded valve measurements to a PC for more detailed analysis and documentation of valve health over time.</li></ul>

<h3><strong>Fluke FLUKE-710 Ma Loop, Valve Tester, W/HART</strong>&nbsp;</h3>
<p><strong>Key Features and Benefits:</strong></p>
<ul>
<li><strong>HART Communication Support:</strong> Allows the sourcing of a 4-20 mA signal to move the smart control valve while monitoring the valve’s HART feedback signal to ensure correct positioning.<br>
&nbsp;</li>
<li><strong>Valve Health Quick-Check:</strong> Provides at-a-glance diagnostics, showing whether the valve is in good, marginal, or bad operating condition for faster decision-making on maintenance.<br>
&nbsp;</li>
<li><strong>Built-In Test Procedures:</strong> Includes pre-configured tests for valve signature, speed, step, manual, and bump/partial stroke tests to simplify valve evaluation.<br>
&nbsp;</li>
<li><strong>Comprehensive mA Loop Functions:</strong> Supports mA source, simulate, read, read/loop power, and volts read for full loop calibration and control.<br>
&nbsp;</li>
<li><strong>Pressure Measurement:</strong> Monitors the pressure delivered from the valve’s internal I/P to provide a complete understanding of valve operation through HART feedback.<br>
&nbsp;</li>
<li><strong>Intuitive User Interface:</strong> The easy-to-use interface and automatic adjustments (such as changing mA signals) simplify testing and ensure precise results.<br>
&nbsp;</li>
<li><strong>ValveTrack™ Software Compatibility:</strong> Enables the upload of recorded valve measurements to a PC for more detailed analysis and documentation of valve health over time.</li>
</ul>


RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

Fluke FLUKE-710 Ma Loop, Valve Tester, W/HART

fluke fluke 710ma loop, valve tester, w/hart penguji katup, dengan hart calibrators gelung ma, injap, fluke/福禄克 毫安环路、电子管测试仪，带 功能 福禄克

fluke-fluke-710-ma-loop-valve-tester-w-hart

FLUKE 717 30G -850mbar to 2bar Pressure Calibrator

 Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.


717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)

717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)

717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)

717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)


For measuring overpressure and vacuum with an internal sensor

Suitable for non-corrosive gases and liquids

Select from numerous technical units for the pressure

Simultaneous measurement of pressure and current for simple P/I or I/P testing

Zero, min. / max., hold and damp functions

Test functions for push button switches: adjusting, resetting, dead zone

CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V

Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual

FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G

Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor.
• Over pressure of 2xFS boosts safety
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process
• Supports a wide range of pressure units including psi, kPa and inHg
• Broad operating temperature range between -10°C and +55°C to endure tough conditions


• Heating systems
• Oil and gas processing
• Pharmaceuticals manufacture


What's included with this pressure calibrator?

As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.


It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.
 

<h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</strong></h3><p class="md-block-unstyled"> Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.<br/></p><p class="md-block-unstyled">Fluke 717 series includes:</p><p class="md-block-unstyled">717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)</p><p class="md-block-unstyled">717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)</p><p class="md-block-unstyled">717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)</p><p class="md-block-unstyled">717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features and Benefits:</strong></h3><ul class="md-block-unordered-list-item"><li>For measuring overpressure and vacuum with an internal sensor</li><li>Suitable for non-corrosive gases and liquids</li><li>Select from numerous technical units for the pressure</li><li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li><li>24 V loop supply</li><li>Zero, min. / max., hold and damp functions</li><li>Test functions for push button switches: adjusting, resetting, dead zone</li></ul><h3 class="md-block-header-three"><strong class="md-inline-bold">Standards</strong></h3><p class="md-block-unstyled">CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V</p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</strong></h3><p class="md-block-unstyled">Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It&#x27;s designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it&#x27;s a piece of cake to carry around your factory floor.<br/>• Over pressure of 2xFS boosts safety<br/>• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process<br/>• Supports a wide range of pressure units including psi, kPa and inHg<br/>• Broad operating temperature range between -10°C and +55°C to endure tough conditions<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Heating systems<br/>• Oil and gas processing<br/>• Pharmaceuticals manufacture<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">What&#x27;s included with this pressure calibrator?</strong></h3><p class="md-block-unstyled">As it&#x27;s supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">How big is this calibrator?</strong></h3><p class="md-block-unstyled">It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.<br/> </p>

<h3><strong>FLUKE 717 30G -850mbar to 2bar Pressure Calibrator</strong></h3>
<p>&nbsp;Fluke 717 Series pressure calibrators offer performance, durability, and reliability. They are compact, lightweight, and easy to carry and use (with well-designed push button interface). They are EMI-tolerant, dust and splash resistant and have a removable battery door for quick battery changes.<br>
</p>
<p>Fluke 717 series includes:</p>
<p>717 30G – 623-9822, 12 to 30 psi (-850 mbar to 2 bar, -85 to 207 kPa)</p>
<p>717 300G – 623-9838, 12 to 300 psi, (-850 mbar to 20 bar, -85 to 2068.4 kPa)</p>
<p>717 100G – 757-7386, 12 to 100 psi, (-850 mbar to 7 bar, -85 to 689.48 kPa)</p>
<p>717 10000G – 757-7386, 0 to 1000 psi, (0 mbar to 69 bar, 0 to 6894.8 kPa)<br>
</p>
<h3><strong>Features and Benefits:</strong></h3>
<ul>
<li>For measuring overpressure and vacuum with an internal sensor</li>
<li>Suitable for non-corrosive gases and liquids</li>
<li>Select from numerous technical units for the pressure</li>
<li>Simultaneous measurement of pressure and current for simple P/I or I/P testing</li>
<li>24 V loop supply</li>
<li>Zero, min. / max., hold and damp functions</li>
<li>Test functions for push button switches: adjusting, resetting, dead zone</li>
</ul>
<h3><strong>Standards</strong></h3>
<p>CSA C22.2 no. 1010.1: 1992, IEC 61010, CAT I 30V</p>
<h3><strong>Supplied with</strong></h3>
<p>Fluke 717, holster, TL75 test leads, AC72 crocodile clips, 9 V battery, instruction manual</p>
<h3><strong>FLUKE Pressure Calibrator, 30V Maximum Voltage, EMI-Tolerant - 717 Series - FLUKE-717 30G</strong></h3>
<p>Keep your systems in tip-top shape with this pressure calibrator from FLUKE. It's designed to measure and adjust the overpressure and vacuum of devices such as gauges and transducers. A wide measurement range between -850mbar and 2 bar means this is a suitable option for low-pressure applications such as HVAC systems. A resolution of 0.1mbar allows you to measure very small changes in pressure with pinpoint precision. The calibrator weighs just 600g, so it's a piece of cake to carry around your factory floor.<br>
• Over pressure of 2xFS boosts safety<br>
• 24-volt loop power supply provides power to the measured instrument, simplifying the calibration process<br>
• Supports a wide range of pressure units including psi, kPa and inHg<br>
• Broad operating temperature range between -10°C and +55°C to endure tough conditions<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Heating systems<br>
• Oil and gas processing<br>
• Pharmaceuticals manufacture<br>
</p>
<h3><strong>What's included with this pressure calibrator?</strong></h3>
<p>As it's supplied with a yellow holster, test leads, crocodile clips, a 9V battery and a CD instruction manual, you can get to work straight away.<br>
</p>
<h3><strong>How big is this calibrator?</strong></h3>
<p>It has a compact design with dimensions of 201 (L) x 98 (W) x 52mm (H), so it fits comfortably in your hands.<br>
&nbsp;</p>


fluke 717 30g -850mbar 2bar pressure calibrator kalibrator tekanan 850mbar hingga measurement pengukuran pengukur fluke/福禄克 压力校准器 福禄克

fluke-717-30g-850mbar-to-2bar-pressure-calibrator


 The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.


Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)
Best in class accuracy at 0.01% reading
Simple 2-wire connection for all measurements and protection up to 240VAC
User-selectable 250ohms resistor
Dedicated span and 25% step buttons
24VDC loop power with mA measure mode (-25% to 125%)
Resolution of 1μA on mA ranges and 1mV on voltage ranges
Variable step and ramp time in seconds
Adjustable span selection (0mA to 20mA or 4mA to 20mA)
Small (150mmx90mmx30mm), light (300g) and robust design
Powered by 6 standard AAA batteries (supplied installed)
Auto shutdown to conserve battery life (adjustable up to 30 minutes)
Protective holster (supplied) fits easily into user's hand
Includes built in selectable 250 Ω resistor for HART communication
Provides intuitive user interface with Quick-Set knob for fast setup


Process control automation
Manufacturing
Instrumentation


ANSI/ESD S20.20:2014
BS EN 61340-5-1:2007 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 709H, Loop Calibrator</strong></h3><p class="md-block-unstyled"><br/> The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features and Benefits</strong></h3><p class="md-block-unstyled">Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use<br/>LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)<br/>Best in class accuracy at 0.01% reading<br/>Simple 2-wire connection for all measurements and protection up to 240VAC<br/>User-selectable 250ohms resistor<br/>Dedicated span and 25% step buttons<br/>24VDC loop power with mA measure mode (-25% to 125%)<br/>Resolution of 1μA on mA ranges and 1mV on voltage ranges<br/>Variable step and ramp time in seconds<br/>Adjustable span selection (0mA to 20mA or 4mA to 20mA)<br/>Small (150mmx90mmx30mm), light (300g) and robust design<br/>Powered by 6 standard AAA batteries (supplied installed)<br/>Auto shutdown to conserve battery life (adjustable up to 30 minutes)<br/>Protective holster (supplied) fits easily into user&#x27;s hand<br/>Includes built in selectable 250 Ω resistor for HART communication<br/>Provides intuitive user interface with Quick-Set knob for fast setup<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">Process control automation<br/>Manufacturing<br/>Instrumentation<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Certifications</strong></h3><p class="md-block-unstyled">ANSI/ESD S20.20:2014<br/>BS EN 61340-5-1:2007 </p>

<h3><strong>Fluke 709H, Loop Calibrator</strong></h3>
<p><br>
 The Fluke precision loop calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Its primary function is to source and measures mA signals in the range of 0mA to 24mA. This loop calibrator can measure 0V to 30V and produce 24VDC loop power. This device includes HART communication functionality and supports a selected set of HART universal and common practice commands. It can be used as a loop calibrator or basic function communicator. It is supplied with AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide and a safety information manual. The calibrator offers the ability to store up to twenty HART device configuration files for uploading via 709H/TRACK software via the 709H/TRACK software. Configurations can be stored as .CSV or .TXT files. This allows the end-user to document plant HART easily.<br>
</p>
<h3><strong>Features and Benefits</strong></h3>
<p>Intuitive interface with a Quick-Set rotary encoder knob for fast setup and ease-of-use<br>
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)<br>
Best in class accuracy at 0.01% reading<br>
Simple 2-wire connection for all measurements and protection up to 240VAC<br>
User-selectable 250ohms resistor<br>
Dedicated span and 25% step buttons<br>
24VDC loop power with mA measure mode (-25% to 125%)<br>
Resolution of 1μA on mA ranges and 1mV on voltage ranges<br>
Variable step and ramp time in seconds<br>
Adjustable span selection (0mA to 20mA or 4mA to 20mA)<br>
Small (150mmx90mmx30mm), light (300g) and robust design<br>
Powered by 6 standard AAA batteries (supplied installed)<br>
Auto shutdown to conserve battery life (adjustable up to 30 minutes)<br>
Protective holster (supplied) fits easily into user's hand<br>
Includes built in selectable 250 Ω resistor for HART communication<br>
Provides intuitive user interface with Quick-Set knob for fast setup<br>
</p>
<h3><strong>Applications</strong></h3>
<p>Process control automation<br>
Manufacturing<br>
Instrumentation<br>
</p>
<h3><strong>Certifications</strong></h3>
<p>ANSI/ESD S20.20:2014<br>
BS EN 61340-5-1:2007&nbsp;</p>


Fluke 709H, Loop Calibrator

fluke 709h, loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 709h 回路校准器 电力测试 福禄克

fluke-709h-loop-calibrator

 The Fluke 715 Volt mA Calibrator delivers outstanding performance, durability, and reliability in a compact, lightweight tool. Offered in the rugged Fluke 80 Series digital multimeter package, the calibrator measures loop current as well as voltage output. It sources voltage to 200 mV or 20 V, measures loop current (0-20 mA, 4-20 mA) signals with 0 .01 % accuracy, and 1 µA resolution, and measures voltage output process signals from PLCs and transmitters. It can source or simulate 4-20 mA loop current and provides a 24 V loop supply with simultaneous current measurement.  

Provides step and linear ramp output function

Features configurable zero and span settings

Provides 24 V loop supply with simultaneous current measurement

Features enhanced voltage and current measure and source accuracy

Includes a 250-ohm HART resistor with loop power

The 715 is also extremely easy to use with a simple push button interface. It features the rugged construction that Fluke tools are known for and is EMI tolerant as well as dust and splash resistant. It also features a removable battery door for quick battery changes after the 18 hours of battery life the 9 V battery provides. And the tool also comes with a protective yellow holster with test lead storage. For added convenience the Fluke 715 is also compatible with the ToolPak magnetic meter hanging system. 

Compact mA calibrator for measuring 0-20 mA or 4-20 mA signals

High accuracy—0.01% and 1 µA resolution

Measures voltage output process signals from PLCs and transmitters

Sources or simulates 4-20 mA loop current

Measure / Source / Simulate mA (% of span)


Drive: 20 mA into 1000 Ω for battery > 6.8 V; 700 Ω for battery 5.8 to 6.8 V

Size (L x W x D): 187 x 87 x 32 mm (7.93 x 3.86 x 2.06 in)

Battery Type: Single 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 715 Volt/mA Loop Calibrator</strong></h3><p class="md-block-unstyled"> The Fluke 715 Volt mA Calibrator delivers outstanding performance, durability, and reliability in a compact, lightweight tool. Offered in the rugged Fluke 80 Series digital multimeter package, the calibrator measures loop current as well as voltage output. It sources voltage to 200 mV or 20 V, measures loop current (0-20 mA, 4-20 mA) signals with 0 .01 % accuracy, and 1 µA resolution, and measures voltage output process signals from PLCs and transmitters. It can source or simulate 4-20 mA loop current and provides a 24 V loop supply with simultaneous current measurement.  </p><ul class="md-block-unordered-list-item"><li>Provides step and linear ramp output function</li><li>Features configurable zero and span settings</li><li>Provides 24 V loop supply with simultaneous current measurement</li><li>Features enhanced voltage and current measure and source accuracy</li><li>Includes a 250-ohm HART resistor with loop power</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Easy to use and carry</strong></p><p class="md-block-unstyled">The 715 is also extremely easy to use with a simple push button interface. It features the rugged construction that Fluke tools are known for and is EMI tolerant as well as dust and splash resistant. It also features a removable battery door for quick battery changes after the 18 hours of battery life the 9 V battery provides. And the tool also comes with a protective yellow holster with test lead storage. For added convenience the Fluke 715 is also compatible with the ToolPak magnetic meter hanging system. </p><ul class="md-block-unordered-list-item"><li>Compact mA calibrator for measuring 0-20 mA or 4-20 mA signals</li><li>High accuracy—0.01% and 1 µA resolution</li><li>Measures voltage output process signals from PLCs and transmitters</li><li>Sources or simulates 4-20 mA loop current</li><li>Sources voltage to 100 mV or 10 V </li></ul><h3 class="md-block-header-three">Functional Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Measure / Source mV</strong><br/></li><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 200 mV</li><li><strong class="md-inline-bold">Resolution</strong>: 0.01 mV</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.015% + 2 counts</li></ul><li><strong class="md-inline-bold">Measure / Source V</strong><br/></li><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 20 V</li><li><strong class="md-inline-bold">Resolution</strong>: 0.001 V</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.01% + 2 counts</li></ul><li><strong class="md-inline-bold">Measure / Source / Simulate mA (% of span)</strong><br/></li><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 24 mA (-25% to 125%)</li><li><strong class="md-inline-bold">Resolution</strong>: 0.001 mA</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.01% + 2 counts</li></ul><li><strong class="md-inline-bold">Sink (simulate transmitter) Display</strong><br/></li><ul class="md-block-unordered-list-item"><li>Display in mA or % of span</li></ul></ul><h3 class="md-block-header-three">Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Loop Power</strong><br/></li><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 24 V DC</li><li><strong class="md-inline-bold">Accuracy</strong>: ±10%</li><li><strong class="md-inline-bold">Drive</strong>: 20 mA into 1000 Ω for battery &gt; 6.8 V; 700 Ω for battery 5.8 to 6.8 V</li></ul><li><strong class="md-inline-bold">Display</strong><br/></li><ul class="md-block-unordered-list-item"><li>Clear 5 digit LCD</li></ul></ul><h3 class="md-block-header-three">Environmental Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Operating Temperature</strong>: -10°C to 55°C</li><li><strong class="md-inline-bold">Storage Temperature</strong>: -40°C to 60°C</li><li><strong class="md-inline-bold">Humidity (without condensation)</strong>:</li><ul class="md-block-unordered-list-item"><li>95% (10°C to 30°C)</li><li>75% (30°C to 40°C)</li><li>45% (40°C to 50°C)</li><li>35% (50°C to 55°C)</li></ul><li><strong class="md-inline-bold">Operating Altitude</strong>: 3,000 m max</li></ul><h3 class="md-block-header-three">Safety Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Safety</strong>: CSA C22.2 No. 1010.1:1992</li></ul><h3 class="md-block-header-three">Mechanical and General Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Size (L x W x D)</strong>: 187 x 87 x 32 mm (7.93 x 3.86 x 2.06 in)</li><li><strong class="md-inline-bold">Weight</strong>: Approx. 330 g (21 oz)</li><li><strong class="md-inline-bold">Warranty</strong>: 3 years</li><li><strong class="md-inline-bold">Shock and Vibration</strong>:</li><ul class="md-block-unordered-list-item"><li>Random, 2 G, 5-500 Hz</li><li>1 m drop test</li></ul></ul><h3 class="md-block-header-three">Power Supply</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Battery Type</strong>: Single 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline</li></ul>

<h3><strong>Fluke 715 Volt/mA Loop Calibrator</strong></h3>
<p>&nbsp;The Fluke 715 Volt mA Calibrator delivers outstanding performance, durability, and reliability in a compact, lightweight tool. Offered in the rugged Fluke 80 Series digital multimeter package, the calibrator measures loop current as well as voltage output. It sources voltage to 200 mV or 20 V, measures loop current (0-20 mA, 4-20 mA) signals with 0 .01 % accuracy, and 1 µA resolution, and measures voltage output process signals from PLCs and transmitters. It can source or simulate 4-20 mA loop current and provides a 24 V loop supply with simultaneous current measurement.&nbsp;&nbsp;</p>
<ul>
<li>Provides step and linear ramp output function</li>
<li>Features configurable zero and span settings</li>
<li>Provides 24 V loop supply with simultaneous current measurement</li>
<li>Features enhanced voltage and current measure and source accuracy</li>
<li>Includes a 250-ohm HART resistor with loop power</li>
</ul>
<p><strong>Easy to use and carry</strong></p>
<p>The 715 is also extremely easy to use with a simple push button interface. It features the rugged construction that Fluke tools are known for and is EMI tolerant as well as dust and splash resistant. It also features a removable battery door for quick battery changes after the 18 hours of battery life the 9 V battery provides. And the tool also comes with a protective yellow holster with test lead storage. For added convenience the Fluke 715 is also compatible with the ToolPak magnetic meter hanging system.&nbsp;</p>
<ul>
<li>Compact mA calibrator for measuring 0-20 mA or 4-20 mA signals</li>
<li>High accuracy—0.01% and 1 µA resolution</li>
<li>Measures voltage output process signals from PLCs and transmitters</li>
<li>Sources or simulates 4-20 mA loop current</li>
<li>Sources voltage to 100 mV or 10 V&nbsp;</li>
</ul>
<h3>Functional Specifications</h3>
<ul>
<li><strong>Measure / Source mV</strong><br>
</li>
<ul>
<li><strong>Range</strong>: 0 to 200 mV</li>
<li><strong>Resolution</strong>: 0.01 mV</li>
<li><strong>Accuracy</strong>: 0.015% + 2 counts</li>
</ul>
<li><strong>Measure / Source V</strong><br>
</li>
<ul>
<li><strong>Range</strong>: 0 to 20 V</li>
<li><strong>Resolution</strong>: 0.001 V</li>
<li><strong>Accuracy</strong>: 0.01% + 2 counts</li>
</ul>
<li><strong>Measure / Source / Simulate mA (% of span)</strong><br>
</li>
<ul>
<li><strong>Range</strong>: 0 to 24 mA (-25% to 125%)</li>
<li><strong>Resolution</strong>: 0.001 mA</li>
<li><strong>Accuracy</strong>: 0.01% + 2 counts</li>
</ul>
<li><strong>Sink (simulate transmitter) Display</strong><br>
</li>
<ul>
<li>Display in mA or % of span</li>
</ul>
</ul>
<h3>Specifications</h3>
<ul>
<li><strong>Loop Power</strong><br>
</li>
<ul>
<li><strong>Range</strong>: 24 V DC</li>
<li><strong>Accuracy</strong>: ±10%</li>
<li><strong>Drive</strong>: 20 mA into 1000 Ω for battery &gt; 6.8 V; 700 Ω for battery 5.8 to 6.8 V</li>
</ul>
<li><strong>Display</strong><br>
</li>
<ul>
<li>Clear 5 digit LCD</li>
</ul>
</ul>
<h3>Environmental Specifications</h3>
<ul>
<li><strong>Operating Temperature</strong>: -10°C to 55°C</li>
<li><strong>Storage Temperature</strong>: -40°C to 60°C</li>
<li><strong>Humidity (without condensation)</strong>:</li>
<ul>
<li>95% (10°C to 30°C)</li>
<li>75% (30°C to 40°C)</li>
<li>45% (40°C to 50°C)</li>
<li>35% (50°C to 55°C)</li>
</ul>
<li><strong>Operating Altitude</strong>: 3,000 m max</li>
</ul>
<h3>Safety Specifications</h3>
<ul>
<li><strong>Safety</strong>: CSA C22.2 No. 1010.1:1992</li>
</ul>
<h3>Mechanical and General Specifications</h3>
<ul>
<li><strong>Size (L x W x D)</strong>: 187 x 87 x 32 mm (7.93 x 3.86 x 2.06 in)</li>
<li><strong>Weight</strong>: Approx. 330 g (21 oz)</li>
<li><strong>Warranty</strong>: 3 years</li>
<li><strong>Shock and Vibration</strong>:</li>
<ul>
<li>Random, 2 G, 5-500 Hz</li>
<li>1 m drop test</li>
</ul>
</ul>
<h3>Power Supply</h3>
<ul>
<li><strong>Battery Type</strong>: Single 9 V battery ANSI/NEDA 1604A or IEC 6LR619V alkaline</li>
</ul>


Extech

ACISION

Center

TRIPLETT

PCE Instruments

MEGGER

AMPROBE

Multimeters

Clamp Meters

Industrial Thermometer

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

Fluke 715 Volt/mA Loop Calibrator

fluke 715 volt/ma loop calibrator kalibrator calibrators gelung fluke/福禄克 伏/毫安回路校准器 福禄克

fluke-715-volt-ma-loop-calibrator

 Fluke's 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement.

Wireless monitoring is made easy with Fluke Connect® mobile app and desktop software compatibility, this allows users to easily share data from anywhere.
Measure ac and dc current, ac and dc volts, continuity, resistance and frequency giving you more capability in less instruments. Key mA loop functions also include simultaneous mA, % scale readout, 20mA current source/simulate and 24 V loop power supply. Featuring a large dual display, an externally accessible battery, easy to use soft press buttons and dial this is the perfect user-friendly addition to any troubleshooting kit.

• 18°C to 28 °C temperature range (for 1 year after calibration)
• Diode test 2.000 V (shows diode voltage drop)
• Simultaneous mA and % scale readout
• Up to 20 kHz frequency measurement
• Min/Max/Average/Hold/Relative modes
• Continuity beeper
• HART mode setting with loop power (adds 250 ohm resistor)
• 20 mA dc current source/measure/simulate
• Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 789 Multi Function Calibrator</strong></h3><ul class="md-block-unordered-list-item"><li>Battery Life	140 h</li><li>Battery Type	AA</li><li>Power Source	Battery</li><li>Weight	610g</li><li>Height	50mm</li><li>Length	203mm</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-20°C</li><li>Model Number p	789</li><li>Width	100mm</li></ul><p class="md-block-unstyled"> Fluke&#x27;s 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement.</p><p class="md-block-unstyled">Wireless monitoring is made easy with Fluke Connect® mobile app and desktop software compatibility, this allows users to easily share data from anywhere.<br/>Measure ac and dc current, ac and dc volts, continuity, resistance and frequency giving you more capability in less instruments. Key mA loop functions also include simultaneous mA, % scale readout, 20mA current source/simulate and 24 V loop power supply. Featuring a large dual display, an externally accessible battery, easy to use soft press buttons and dial this is the perfect user-friendly addition to any troubleshooting kit.</p><p class="md-block-unstyled"><strong class="md-inline-bold">Features and Benefits:</strong></p><p class="md-block-unstyled">• 18°C to 28 °C temperature range (for 1 year after calibration)<br/>• Diode test 2.000 V (shows diode voltage drop)<br/>• Simultaneous mA and % scale readout<br/>• Up to 20 kHz frequency measurement<br/>• Min/Max/Average/Hold/Relative modes<br/>• Continuity beeper<br/>• HART mode setting with loop power (adds 250 ohm resistor)<br/>• 20 mA dc current source/measure/simulate<br/>• Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 </p>

<h3><strong>Fluke 789 Multi Function Calibrator</strong></h3>
<ul>
<li>Battery Life	140 h</li>
<li>Battery Type	AA</li>
<li>Power Source	Battery</li>
<li>Weight	610g</li>
<li>Height	50mm</li>
<li>Length	203mm</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Model Number p	789</li>
<li>Width	100mm</li>
</ul>
<p>&nbsp;Fluke's 789 combined multimeter and current loop calibrator features double troubleshooting capabilities, a mA loop calibrator and safety rated digital multimeter have been combined into one compact tool for easy measurement.</p>
<p>Wireless monitoring is made easy with Fluke Connect® mobile app and desktop software compatibility, this allows users to easily share data from anywhere.<br>
Measure ac and dc current, ac and dc volts, continuity, resistance and frequency giving you more capability in less instruments. Key mA loop functions also include simultaneous mA, % scale readout, 20mA current source/simulate and 24 V loop power supply. Featuring a large dual display, an externally accessible battery, easy to use soft press buttons and dial this is the perfect user-friendly addition to any troubleshooting kit.</p>
<p><strong>Features and Benefits:</strong></p>
<p>• 18°C to 28 °C temperature range (for 1 year after calibration)<br>
• Diode test 2.000 V (shows diode voltage drop)<br>
• Simultaneous mA and % scale readout<br>
• Up to 20 kHz frequency measurement<br>
• Min/Max/Average/Hold/Relative modes<br>
• Continuity beeper<br>
• HART mode setting with loop power (adds 250 ohm resistor)<br>
• 20 mA dc current source/measure/simulate<br>
• Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92&nbsp;</p>


Fluke 789 Process Meter Users Manual

Fluke 789 Current Loop Calibrator

Guide - 789/787B

Fluke 789 Multi Function Calibrator

fluke 789 multi function calibrator kalibrator multifungsi calibrators fluke/福禄克 多功能校准器 福禄克

fluke-789-multi-function-calibrator

 The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary functions are source and measure mA signals in the range 0 to 24 mA. The Fluke 709 can measure 0 to 30 V and produce 24Vdc loop power. The 709H includes HART communication functionality and supports a select set of HART universal and common-practice commands. It can be used as a loop calibrator or basic function communicator.
Intuitive interface with Quick-Set rotary encoder knob for fast setup and ease-of-use
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)
Best in class accuracy at 0.01% reading
Simple two-wire connection for all measurements and protection up to 240Vac
User-selectable 250Ω resistor
Dedicated span and 25% step buttons
24Vdc loop power with mA Measure Mode (-25% to 125%)
Resolution of 1μA on mA ranges and 1mV on voltage ranges
Variable step & ramp time in seconds
Adjustable span selection (0 to 20 mA or 4 to 20 mA)
Small (150x90x30mm), light (300g) and robust design
Powered by 6 standard AAA batteries (supplied installed)
Auto Shutdown to conserve battery life (adjustable up to 30 minutes)
Protective holster (supplied) fits easily into user's hand


AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide, safety information 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 709, Loop Calibrator</strong></h3><p class="md-block-unstyled"> The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary functions are source and measure mA signals in the range 0 to 24 mA. The Fluke 709 can measure 0 to 30 V and produce 24Vdc loop power. The 709H includes HART communication functionality and supports a select set of HART universal and common-practice commands. It can be used as a loop calibrator or basic function communicator.<br/>Intuitive interface with Quick-Set rotary encoder knob for fast setup and ease-of-use<br/>LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)<br/>Best in class accuracy at 0.01% reading<br/>Simple two-wire connection for all measurements and protection up to 240Vac<br/>User-selectable 250Ω resistor<br/>Dedicated span and 25% step buttons<br/>24Vdc loop power with mA Measure Mode (-25% to 125%)<br/>Resolution of 1μA on mA ranges and 1mV on voltage ranges<br/>Variable step &amp; ramp time in seconds<br/>Adjustable span selection (0 to 20 mA or 4 to 20 mA)<br/>Small (150x90x30mm), light (300g) and robust design<br/>Powered by 6 standard AAA batteries (supplied installed)<br/>Auto Shutdown to conserve battery life (adjustable up to 30 minutes)<br/>Protective holster (supplied) fits easily into user&#x27;s hand<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide, safety information </p>

<h3><strong>Fluke 709, Loop Calibrator</strong></h3>
<p>&nbsp;The Fluke 709 Precision Loop Calibrator reduces the time it takes to measure or source voltage or current and power up a loop. It is used for installation, calibration and troubleshooting field transmitters, valves and other control system components. Primary functions are source and measure mA signals in the range 0 to 24 mA. The Fluke 709 can measure 0 to 30 V and produce 24Vdc loop power. The 709H includes HART communication functionality and supports a select set of HART universal and common-practice commands. It can be used as a loop calibrator or basic function communicator.<br>
Intuitive interface with Quick-Set rotary encoder knob for fast setup and ease-of-use<br>
LCD graphic display 128x64 pixels with backlight and contrast adjust (.34 high digits)<br>
Best in class accuracy at 0.01% reading<br>
Simple two-wire connection for all measurements and protection up to 240Vac<br>
User-selectable 250Ω resistor<br>
Dedicated span and 25% step buttons<br>
24Vdc loop power with mA Measure Mode (-25% to 125%)<br>
Resolution of 1μA on mA ranges and 1mV on voltage ranges<br>
Variable step &amp; ramp time in seconds<br>
Adjustable span selection (0 to 20 mA or 4 to 20 mA)<br>
Small (150x90x30mm), light (300g) and robust design<br>
Powered by 6 standard AAA batteries (supplied installed)<br>
Auto Shutdown to conserve battery life (adjustable up to 30 minutes)<br>
Protective holster (supplied) fits easily into user's hand<br>
</p>
<h3><strong>Supplied with</strong></h3>
<p>AC72-1 alligator clips (2), TL75 test leads, soft case, 6 AAA batteries (installed), product manual, quick reference guide, safety information&nbsp;</p>


Fluke 709, Loop Calibrator

fluke 709, loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 709 回路校准器 电力测试 福禄克

fluke-709-loop-calibrator

The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.

Compact digital multimeter and mA loop calibrator solution

Full-featured mA loop calibrator with built-in 24v Loop Power

Quickly and easily troubleshoot every part of a control loop

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 789 ProcessMeter</strong></h3><p class="md-block-unstyled">The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.</p><ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Full-featured mA loop calibrator with built-in 24v Loop Power</li><li>Quickly and easily troubleshoot every part of a control loop</li><li>Large, bright dual-measurement display</li></ul><p class="md-block-unstyled"><br/></p>

<h3><strong>Fluke 789 ProcessMeter</strong></h3>
<p>The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals. It combines the functionality of a full-featured loop calibrator with the power of a CAT III 1000 V, CAT IV 600 V safety rated digital multimeter, and the wireless capabilities of Fluke Connect connectivity with optional IR3000FC module. The 789 has a large, dual display with two levels of backlighting and externally accessible fuse and batteries for easy replacement. And its built-in, selectable 250-ohm HART® resistor eliminates the need to carry a separate resistor.</p>
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Full-featured mA loop calibrator with built-in 24v Loop Power</li>
<li>Quickly and easily troubleshoot every part of a control loop</li>
<li>Large, bright dual-measurement display</li>
</ul>
<p></p>


Technical Data

Fluke 789 Processmeter

fluke 789 processmeter pengukur proses measuring tools alat ukur lainnya lain fluke/福禄克 过程仪表 其他量具用品 福禄克

fluke-789-processmeter

Absolute Maximum Current Measurement	24mA

 Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator. Designed for high performance one handed operation, calibration, maintenance and repairs of current loops, assisting users in working more accurately and efficiently.

A clear large simultaneous mA and % of span display, alongside the simple rotary button allows adjustments and quick selections with one hand. Fluke's calibrator includes 24 volt loop supply, allowing you to power and read a transmitter at the same time.

• Slow ramp, fast ramp and step ramp options
• Measures V DC to 28 V
• 0-100% span check (fast confirmation of zero and span
• Push button with 25% steps for linearity checks
• 0-20 mA or 4-20 mA default start up modes
• Protective yellow holster featuring test lead storage
• 24 V loop supply with mA measure
• -10°C to 55 °C operating temperature
 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 707, 24mA Loop Calibrator</strong></h3><ul class="md-block-unordered-list-item"><li>Best Accuracy	±0.015 %</li><li>Model Number p	707</li><li>Absolute Maximum Current Measurement	24mA</li><li>Resolution	0.001 mA</li><li>Safety Category	CSA C22.2</li><li>Battery Type	A</li><li>Battery Life	18 h</li><li>Power Source	Battery</li><li>Dimensions	152 x 70 x 41mm</li><li>Weight	350g</li><li>Height	164mm</li><li>Length	47mm</li><li>Maximum Operating Temperature	+55°C</li><li>Minimum Operating Temperature	-10°C</li><li>Width	75mm</li><li>Safety Category Voltage	30V</li></ul><p class="md-block-unstyled"> Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator. Designed for high performance one handed operation, calibration, maintenance and repairs of current loops, assisting users in working more accurately and efficiently.</p><p class="md-block-unstyled">A clear large simultaneous mA and % of span display, alongside the simple rotary button allows adjustments and quick selections with one hand. Fluke&#x27;s calibrator includes 24 volt loop supply, allowing you to power and read a transmitter at the same time.</p><p class="md-block-unstyled"><strong class="md-inline-bold">Features and Benefits:</strong></p><p class="md-block-unstyled">• Slow ramp, fast ramp and step ramp options<br/>• Measures V DC to 28 V<br/>• 0-100% span check (fast confirmation of zero and span<br/>• Push button with 25% steps for linearity checks<br/>• 0-20 mA or 4-20 mA default start up modes<br/>• Protective yellow holster featuring test lead storage<br/>• 24 V loop supply with mA measure<br/>• -10°C to 55 °C operating temperature<br/> </p>

<h3><strong>Fluke 707, 24mA Loop Calibrator</strong></h3>
<ul>
<li>Best Accuracy	±0.015 %</li>
<li>Model Number p	707</li>
<li>Absolute Maximum Current Measurement	24mA</li>
<li>Resolution	0.001 mA</li>
<li>Safety Category	CSA C22.2</li>
<li>Battery Type	A</li>
<li>Battery Life	18 h</li>
<li>Power Source	Battery</li>
<li>Dimensions	152 x 70 x 41mm</li>
<li>Weight	350g</li>
<li>Height	164mm</li>
<li>Length	47mm</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Minimum Operating Temperature	-10°C</li>
<li>Width	75mm</li>
<li>Safety Category Voltage	30V</li>
</ul>
<p>&nbsp;Extremely fast and easy to use, Fluke offers a push-button and knob-base current loop calibrator. Designed for high performance one handed operation, calibration, maintenance and repairs of current loops, assisting users in working more accurately and efficiently.</p>
<p>A clear large simultaneous mA and % of span display, alongside the simple rotary button allows adjustments and quick selections with one hand. Fluke's calibrator includes 24 volt loop supply, allowing you to power and read a transmitter at the same time.</p>
<p><strong>Features and Benefits:</strong></p>
<p>• Slow ramp, fast ramp and step ramp options<br>
• Measures V DC to 28 V<br>
• 0-100% span check (fast confirmation of zero and span<br>
• Push button with 25% steps for linearity checks<br>
• 0-20 mA or 4-20 mA default start up modes<br>
• Protective yellow holster featuring test lead storage<br>
• 24 V loop supply with mA measure<br>
• -10°C to 55 °C operating temperature<br>
&nbsp;</p>


Fluke 707 Calibration Information

Fluke 707 Instructions

Fluke 705/707 Safety Information

Fluke 707, 24mA Loop Calibrator

fluke 707, 24ma loop calibrator kalibrator calibrators gelung fluke/福禄克 707，24ma 回路校准器 福禄克

fluke-707-24ma-loop-calibrator

The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. 

With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.

*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.

The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.

Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. 

Measure/Source/Simulate loop currents while powering the loop

Manual and automatic ramp up – ramp down functions

Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V

Range and Resolution: 1.000 A (0.440 A continuous)

Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M

Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz

Range and Resolution: 2.000 V (shows diode voltage drop)

DC Current Output (Internal Battery Operation):


Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA

Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA

DC Current Simulate (External 15 V to 48 V Loop Supply):


Automatic: Slow Ramp, Fast Ramp, 25% step

Temperature Range: 18 °C to 28 °C, for one year after calibration

Maximum Voltage Applied Between Any Jack and Earth Ground: 1000 V RMS

Temperature Coefficient: 0.05 x (specified accuracy) per °C (for temperatures < 18 °C or > 28 °C)

Safety: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V

Size (HxWxL): 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)

<h3 class="md-block-header-three"><strong class="md-inline-bold"> Fluke 787B Processmeter</strong></h3><p class="md-block-unstyled">The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications. </p><p class="md-block-unstyled">With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.</p><p class="md-block-unstyled">*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.</p><p class="md-block-unstyled"><strong class="md-inline-bold">Expand your troubleshooting capabilities</strong></p><p class="md-block-unstyled">The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.</p><p class="md-block-unstyled">Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes. </p><ul class="md-block-unordered-list-item"><li>Compact digital multimeter and mA loop calibrator solution</li><li>Measure/Source/Simulate loop currents while powering the loop</li><li>Manual and automatic ramp up – ramp down functions</li><li>Easy-to-read backlit display </li></ul><h3 class="md-block-header-three">Measurement Function</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">V DC</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.1% + 1</li></ul><li><strong class="md-inline-bold">V AC (True-RMS)</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li><li>Best Accuracy: 0.7% + 2</li></ul><li><strong class="md-inline-bold">mA DC</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 30.000 mA</li><li>Best Accuracy: 0.05% + 2</li></ul><li><strong class="md-inline-bold">A DC</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 0.2% + 2</li></ul><li><strong class="md-inline-bold">A AC</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 1.000 A (0.440 A continuous)</li><li>Best Accuracy: 1% + 2</li></ul><li><strong class="md-inline-bold">Resistance</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li><li>Best Accuracy: 0.2% + 1</li></ul><li><strong class="md-inline-bold">Frequency (0.5 Hz to 20 kHz)</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li><li>Best Accuracy: 0.005% + 1</li></ul><li><strong class="md-inline-bold">Diode Test</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 2.000 V (shows diode voltage drop)</li><li>Best Accuracy: 2% + 1</li></ul><li><strong class="md-inline-bold">Continuity</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Beeps for resistance &lt; approx. 100 ohms</li></ul></ul><h3 class="md-block-header-three">Output Function</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">DC Current Output (Internal Battery Operation)</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li><strong class="md-inline-bold">DC Current Simulate (External 15 V to 48 V Loop Supply)</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li><li>Drive Capability: 1000 ohms @ 20 mA</li><li>Accuracy: 0.05%</li></ul><li><strong class="md-inline-bold">Current Adjustment Modes</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>Manual: Coarse, Fine, 25% and 100% step</li><li>Automatic: Slow Ramp, Fast Ramp, 25% step</li></ul></ul><h3 class="md-block-header-three">Temperature Range</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Temperature Range</strong>: 18 °C to 28 °C, for one year after calibration</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Maximum Voltage Applied Between Any Jack and Earth Ground</strong>: 1000 V RMS</li><li><strong class="md-inline-bold">Storage Temperature</strong>: -40 °C to 60 °C</li><li><strong class="md-inline-bold">Operating Temperature</strong>: -20 °C to 55 °C</li><li><strong class="md-inline-bold">Temperature Coefficient</strong>: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li><li><strong class="md-inline-bold">Relative Humidity</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>95% up to 30 °C</li><li>75% up to 40 °C</li><li>45% up to 50 °C</li><li>35% up to 55 °C</li></ul><li><strong class="md-inline-bold">Vibration</strong>: Random, 2 g, 5-500 Hz</li><li><strong class="md-inline-bold">Shock</strong>: 1 meter drop test</li><li><strong class="md-inline-bold">Safety</strong>: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li><li><strong class="md-inline-bold">Size (HxWxL)</strong>: 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li><li><strong class="md-inline-bold">Weight</strong>: 600 g (1.3 lbs)</li><li><strong class="md-inline-bold">Battery</strong>: Four AA alkaline batteries</li><li><strong class="md-inline-bold">Battery Life</strong>:<br/></li><ul class="md-block-unordered-list-item"><li>140 hours typical (measurement)</li><li>10 hours typical (sourcing 12 mA)</li></ul><li><strong class="md-inline-bold">Warranty</strong>: Three years</li></ul>

<h3><strong> Fluke 787B Processmeter</strong></h3>
<p>The Fluke 787B ProcessMeter™ doubles your troubleshooting capabilities by combining the power of a safety rated digital multimeter and mA loop calibrator into a single, compact test tool. Based on the trusted measurement capabilities of the Fluke 87V meter, the 787B adds the ability to measure, source and simulate mA with the accuracy and resolution you would expect from a Fluke mA loop calibrator, giving you the ideal tool for troubleshooting and calibrating current loop applications.&nbsp;</p>
<p>With Fluke Connect® mobile app and desktop software compatibility, technicians can wirelessly monitor, log, and share data from the field with their team anytime, from anywhere.* If you’re looking for even more troubleshooting power, the Fluke 789 ProcessMeter™ offers technicians even more flexibility, and even includes a built-in 24 V loop power supply.</p>
<p>*Requires Fluke IR3000FC module (not included). Not all models are available in all countries. Check with your local Fluke representative.</p>
<p><strong>Expand your troubleshooting capabilities</strong></p>
<p>The Fluke 787B not only allows you to source, measure and simulate 20 mA DC current but also allows you simultaneously look at mA and percent of scale readouts so you can easily compare readings to what you see on your controller. Manually step mA signals (100%, 25%, Coarse adjustment, Fine adjustment) or use the Auto step and Auto ramp feature to work even more efficiently.</p>
<p>Designed to meet 1000 V IEC 61010 CAT III and 600 V CAT IV standards, the Fluke 787B is also a full-featured, precision, true-rms digital multimeter with standard features for diode testing and a continuity beeper. Troubleshoot more, while carrying less. The 787B also allows you to make frequency measurements to 20 kHz and includes Min/Max/Average/Hold/Relative modes for easy operation. Even the batteries and fuses are easily accessible allowing you to make fast, easy changes.&nbsp;</p>
<ul>
<li>Compact digital multimeter and mA loop calibrator solution</li>
<li>Measure/Source/Simulate loop currents while powering the loop</li>
<li>Manual and automatic ramp up – ramp down functions</li>
<li>Easy-to-read backlit display&nbsp;</li>
</ul>
<h3>Measurement Function</h3>
<ul>
<li><strong>V DC</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.1% + 1</li>
</ul>
<li><strong>V AC (True-RMS)</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V</li>
<li>Best Accuracy: 0.7% + 2</li>
</ul>
<li><strong>mA DC</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 30.000 mA</li>
<li>Best Accuracy: 0.05% + 2</li>
</ul>
<li><strong>A DC</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 0.2% + 2</li>
</ul>
<li><strong>A AC</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 1.000 A (0.440 A continuous)</li>
<li>Best Accuracy: 1% + 2</li>
</ul>
<li><strong>Resistance</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 400.0 Ohms, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M</li>
<li>Best Accuracy: 0.2% + 1</li>
</ul>
<li><strong>Frequency (0.5 Hz to 20 kHz)</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 199.99 Hz, 1999.9 Hz, 19.999 kHz</li>
<li>Best Accuracy: 0.005% + 1</li>
</ul>
<li><strong>Diode Test</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 2.000 V (shows diode voltage drop)</li>
<li>Best Accuracy: 2% + 1</li>
</ul>
<li><strong>Continuity</strong>:<br>
</li>
<ul>
<li>Beeps for resistance &lt; approx. 100 ohms</li>
</ul>
</ul>
<h3>Output Function</h3>
<ul>
<li><strong>DC Current Output (Internal Battery Operation)</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 24 V compliance or 1,200 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li><strong>DC Current Simulate (External 15 V to 48 V Loop Supply)</strong>:<br>
</li>
<ul>
<li>Range and Resolution: 0.000 to 20.000 mA or 4.000 to 20.000 mA (selectable at power-up), Over-range to 24.000 mA</li>
<li>Drive Capability: 1000 ohms @ 20 mA</li>
<li>Accuracy: 0.05%</li>
</ul>
<li><strong>Current Adjustment Modes</strong>:<br>
</li>
<ul>
<li>Manual: Coarse, Fine, 25% and 100% step</li>
<li>Automatic: Slow Ramp, Fast Ramp, 25% step</li>
</ul>
</ul>
<h3>Temperature Range</h3>
<ul>
<li><strong>Temperature Range</strong>: 18 °C to 28 °C, for one year after calibration</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li><strong>Maximum Voltage Applied Between Any Jack and Earth Ground</strong>: 1000 V RMS</li>
<li><strong>Storage Temperature</strong>: -40 °C to 60 °C</li>
<li><strong>Operating Temperature</strong>: -20 °C to 55 °C</li>
<li><strong>Temperature Coefficient</strong>: 0.05 x (specified accuracy) per °C (for temperatures &lt; 18 °C or &gt; 28 °C)</li>
<li><strong>Relative Humidity</strong>:<br>
</li>
<ul>
<li>95% up to 30 °C</li>
<li>75% up to 40 °C</li>
<li>45% up to 50 °C</li>
<li>35% up to 55 °C</li>
</ul>
<li><strong>Vibration</strong>: Random, 2 g, 5-500 Hz</li>
<li><strong>Shock</strong>: 1 meter drop test</li>
<li><strong>Safety</strong>: IEC61010-1, Pollution Degree 2/IEC61010-2-033, CAT IV 600 V/CAT III 1000 V</li>
<li><strong>Size (HxWxL)</strong>: 50 x 100 x 203 mm (1.97 x 3.94 x 8.00 in)</li>
<li><strong>Weight</strong>: 600 g (1.3 lbs)</li>
<li><strong>Battery</strong>: Four AA alkaline batteries</li>
<li><strong>Battery Life</strong>:<br>
</li>
<ul>
<li>140 hours typical (measurement)</li>
<li>10 hours typical (sourcing 12 mA)</li>
</ul>
<li><strong>Warranty</strong>: Three years</li>
</ul>


Fluke 787B Processmeter

fluke 787b processmeter pengukur proses calibrators fluke/福禄克 过程仪表 福禄克

fluke-787b-processmeter

 Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.


Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.


• 0.02% accuracy
• 24 V loop supply with mA measure
• Simultaneous mA and % of span display
• Selectable step/ramp outputs
• mA sourcing, simulation and measurement
• Compact case and protective holster
• Quick battery replacement


Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.


How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.


9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data

FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091

Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.


• Helpful for linearity checks thanks to its dedicated push button for 25% increments
• Switchable between stepped or ramped output to meet your application needs
• 9V battery is easy to change without opening the case and affecting the calibration seal
• 'Span check' function gives you speedily calculated results for zero and span measurements


• Test and measurement devices
• Research and development labs
• Electronics servicing


What's the benefit of this product's internal loop supply?

This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU. 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke 705, 24mA Loop Calibrator</strong></h3><p class="md-block-unstyled"> Fluke&#x27;s integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.<br/></p><p class="md-block-unstyled">Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features and Benefits:</strong></h3><p class="md-block-unstyled">• 0.02% accuracy<br/>• 24 V loop supply with mA measure<br/>• Simultaneous mA and % of span display<br/>• Selectable step/ramp outputs<br/>• mA sourcing, simulation and measurement<br/>• Compact case and protective holster<br/>• Quick battery replacement<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">FAQ&#x27;s</strong></h3><h3 class="md-block-header-three"><strong class="md-inline-bold">What is a current loop calibrator?</strong></h3><p class="md-block-unstyled">Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">How much current flows in each loop of a parallel circuit?</strong></h3><p class="md-block-unstyled">Determined by Ohm&#x27;s law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</strong></h3><p class="md-block-unstyled">Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit&#x27;s tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it&#x27;s protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features &amp; Benefits</strong></h3><p class="md-block-unstyled">• Helpful for linearity checks thanks to its dedicated push button for 25% increments<br/>• Switchable between stepped or ramped output to meet your application needs<br/>• 9V battery is easy to change without opening the case and affecting the calibration seal<br/>• &#x27;Span check&#x27; function gives you speedily calculated results for zero and span measurements<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Test and measurement devices<br/>• Research and development labs<br/>• Electronics servicing<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">What&#x27;s the benefit of this product&#x27;s internal loop supply?</strong></h3><p class="md-block-unstyled">This product&#x27;s 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU. </p>

<h3><strong>Fluke 705, 24mA Loop Calibrator</strong></h3>
<p>&nbsp;Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.<br>
</p>
<p>Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.<br>
</p>
<h3><strong>Features and Benefits:</strong></h3>
<p>• 0.02% accuracy<br>
• 24 V loop supply with mA measure<br>
• Simultaneous mA and % of span display<br>
• Selectable step/ramp outputs<br>
• mA sourcing, simulation and measurement<br>
• Compact case and protective holster<br>
• Quick battery replacement<br>
</p>
<h3><strong>FAQ's</strong></h3>
<h3><strong>What is a current loop calibrator?</strong></h3>
<p>Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.<br>
</p>
<h3><strong>How much current flows in each loop of a parallel circuit?</strong></h3>
<p>Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.<br>
</p>
<h3><strong>Supplied with</strong></h3>
<p>9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data</p>
<h3><strong>FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</strong></h3>
<p>Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.<br>
</p>
<h3><strong>Features &amp; Benefits</strong></h3>
<p>• Helpful for linearity checks thanks to its dedicated push button for 25% increments<br>
• Switchable between stepped or ramped output to meet your application needs<br>
• 9V battery is easy to change without opening the case and affecting the calibration seal<br>
• 'Span check' function gives you speedily calculated results for zero and span measurements<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Test and measurement devices<br>
• Research and development labs<br>
• Electronics servicing<br>
</p>
<h3><strong>What's the benefit of this product's internal loop supply?</strong></h3>
<p>This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.&nbsp;</p>


Fluke 705, 24mA Loop Calibrator

fluke 705, 24ma loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 705，24ma 回路校准器 电力测试 福禄克

fluke-705-24ma-loop-calibrator

FLUKE 707 CURRENT LOOP CALIBRATOR WITH QUICK CLICK KNOB

The Fluke 707 loop calibrator is a high performance solution for calibration, repair, and maintenance of current loops. It combines the best features of a push-button and knob-base loop calibrator, for extremely fast and easy calibration. The large display and simple quick click rotary button lets you make quick selections and adjustments with one hand. Plus, features such as mA sourcing, simulation, and measurement; simultaneous display of mA and % of span, and selectable step or ramp outputs, helps you work more efficiently and accurately. And you can quickly change the 9V battery without breaking the calibration seal.  

Includes HART® compatible resistance connected in series with the loop supply for compatibility with HART communicators

Features push button 25% steps for fast, easy linearity checks

Includes 0-100% “span check” for fast confirmation of zero and span.

Provides selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests

Includes a 24 volt internal loop supply, so you can power and read a transmitter at the same time without a DMM

Runs on a single 9 V battery that is easily changed without breaking the calibration seal

<h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE 707 CURRENT LOOP CALIBRATOR WITH QUICK CLICK KNOB</strong></h3><p class="md-block-unstyled">The Fluke 707 loop calibrator is a high performance solution for calibration, repair, and maintenance of current loops. It combines the best features of a push-button and knob-base loop calibrator, for extremely fast and easy calibration. The large display and simple quick click rotary button lets you make quick selections and adjustments with one hand. Plus, features such as mA sourcing, simulation, and measurement; simultaneous display of mA and % of span, and selectable step or ramp outputs, helps you work more efficiently and accurately. And you can quickly change the 9V battery without breaking the calibration seal.  </p><ul class="md-block-unordered-list-item"><li>Includes HART® compatible resistance connected in series with the loop supply for compatibility with HART communicators</li><li>Features push button 25% steps for fast, easy linearity checks</li><li>Includes 0-100% “span check” for fast confirmation of zero and span.</li><li>Provides selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests</li><li>Includes a 24 volt internal loop supply, so you can power and read a transmitter at the same time without a DMM</li><li>Measures V DC to 28 V</li><li>Runs on a single 9 V battery that is easily changed without breaking the calibration seal</li><li>Offers 0 – 20 mA or 4 – 20 mA default start up modes</li><li>Features an innovative output adjustment dial.</li><li>Comes with a protective yellow holster with test lead storage and a three year warranty </li><li>High performance loop calibrator for calibration, repair, and maintenance</li><li>Features large display and simple, quick-click interface for easy one-handed operation.</li><li>Provides simultaneous mA and % readout for quick, easy interpretation of readings.</li><li>Delivers mA accuracy of 0.015%</li><li>Provides 1 µA resolution for mA source, simulate, and measure </li></ul><h4 class="md-block-header-four">Current Measurement</h4><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 24 mA</li><li><strong class="md-inline-bold">Resolution</strong>: 0.001 mA</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.015% Rdg + 2 LSD</li></ul><h4 class="md-block-header-four">Current Sourcing</h4><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 20 mA or 4 to 20 mA</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.015% Rdg + 2 LSD</li><li><strong class="md-inline-bold">Drive Capability</strong>:</li><ul class="md-block-unordered-list-item"><li>1200 Ω</li><li>950 Ω at 20 mA in HART mode</li></ul></ul><h4 class="md-block-header-four">Current Simulation</h4><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 20 mA or 4 to 20 mA</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.015% Rdg + 2 LSD</li><li><strong class="md-inline-bold">Ext. Loop Voltage Requirement</strong>: 12-30 V</li></ul><h4 class="md-block-header-four">Voltage Measurement</h4><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range</strong>: 0 to 28 V DC</li><li><strong class="md-inline-bold">Resolution</strong>: 1 mV</li><li><strong class="md-inline-bold">Accuracy</strong>: 0.015% Rdg + 2 LSD</li></ul><h3 class="md-block-header-three">Environmental Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Operating Temperature</strong>: -10°C to 55°C</li><li><strong class="md-inline-bold">Storage Temperature</strong>: -30°C to 60°C</li><li><strong class="md-inline-bold">Humidity (without condensation)</strong>:</li><ul class="md-block-unordered-list-item"><li>0 to 90% (0°C to 35°C)</li><li>0 to 70% (35°C to 55°C)</li></ul><li><strong class="md-inline-bold">Temperature Coefficient</strong>:</li><ul class="md-block-unordered-list-item"><li>-10°C to 18°C, 28°C to 55°C, ±0.005% of range per °C</li></ul></ul><h3 class="md-block-header-three">Safety Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Safety</strong>: CSA C22.2 No. 1010.1:1992</li><li><strong class="md-inline-bold">EMC</strong>: EN50082-1:1992 and EN55022:1994 Class B</li><li><strong class="md-inline-bold">Maximum Voltage</strong>: 30 V</li></ul><h3 class="md-block-header-three">Mechanical and General Specifications</h3><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Size</strong>: 152 x 70 x 41 mm</li><li><strong class="md-inline-bold">Weight</strong>: 224 g (340 g including holster)</li><li><strong class="md-inline-bold">Batteries</strong>: One 9 V Alkaline battery</li><li><strong class="md-inline-bold">Warranty</strong>: Three years</li><li><strong class="md-inline-bold">Shock and Vibration</strong>: Per MIL-T-28800 for a Class 2 Instrument</li><li><strong class="md-inline-bold">Display Current and % of Span</strong>: Yes</li><li><strong class="md-inline-bold">Auto Step, Auto Ramp</strong>: Yes</li><li><strong class="md-inline-bold">Span Check</strong>: Yes</li></ul>

<h3><strong>FLUKE 707 CURRENT LOOP CALIBRATOR WITH QUICK CLICK KNOB</strong></h3>
<p>The Fluke 707 loop calibrator is a high performance solution for calibration, repair, and maintenance of current loops. It combines the best features of a push-button and knob-base loop calibrator, for extremely fast and easy calibration. The large display and simple quick click rotary button lets you make quick selections and adjustments with one hand. Plus, features such as mA sourcing, simulation, and measurement; simultaneous display of mA and % of span, and selectable step or ramp outputs, helps you work more efficiently and accurately. And you can quickly change the 9V battery without breaking the calibration seal.&nbsp;&nbsp;</p>
<ul>
<li>Includes HART® compatible resistance connected in series with the loop supply for compatibility with HART communicators</li>
<li>Features push button 25% steps for fast, easy linearity checks</li>
<li>Includes 0-100% “span check” for fast confirmation of zero and span.</li>
<li>Provides selectable slow ramp, fast ramp, and step ramp to provide smooth outputs for valve slewing and loop functional tests</li>
<li>Includes a 24 volt internal loop supply, so you can power and read a transmitter at the same time without a DMM</li>
<li>Measures V DC to 28 V</li>
<li>Runs on a single 9 V battery that is easily changed without breaking the calibration seal</li>
<li>Offers 0 – 20 mA or 4 – 20 mA default start up modes</li>
<li>Features an innovative output adjustment dial.</li>
<li>Comes with a protective yellow holster with test lead storage and a three year warranty&nbsp;</li>
<li>High performance loop calibrator for calibration, repair, and maintenance</li>
<li>Features large display and simple, quick-click interface for easy one-handed operation.</li>
<li>Provides simultaneous mA and % readout for quick, easy interpretation of readings.</li>
<li>Delivers mA accuracy of 0.015%</li>
<li>Provides 1 µA resolution for mA source, simulate, and measure&nbsp;</li>
</ul>
<h4>Current Measurement</h4>
<ul>
<li><strong>Range</strong>: 0 to 24 mA</li>
<li><strong>Resolution</strong>: 0.001 mA</li>
<li><strong>Accuracy</strong>: 0.015% Rdg + 2 LSD</li>
</ul>
<h4>Current Sourcing</h4>
<ul>
<li><strong>Range</strong>: 0 to 20 mA or 4 to 20 mA</li>
<li><strong>Accuracy</strong>: 0.015% Rdg + 2 LSD</li>
<li><strong>Drive Capability</strong>:</li>
<ul>
<li>1200 Ω</li>
<li>950 Ω at 20 mA in HART mode</li>
</ul>
</ul>
<h4>Current Simulation</h4>
<ul>
<li><strong>Range</strong>: 0 to 20 mA or 4 to 20 mA</li>
<li><strong>Accuracy</strong>: 0.015% Rdg + 2 LSD</li>
<li><strong>Ext. Loop Voltage Requirement</strong>: 12-30 V</li>
</ul>
<h4>Voltage Measurement</h4>
<ul>
<li><strong>Range</strong>: 0 to 28 V DC</li>
<li><strong>Resolution</strong>: 1 mV</li>
<li><strong>Accuracy</strong>: 0.015% Rdg + 2 LSD</li>
</ul>
<h3>Environmental Specifications</h3>
<ul>
<li><strong>Operating Temperature</strong>: -10°C to 55°C</li>
<li><strong>Storage Temperature</strong>: -30°C to 60°C</li>
<li><strong>Humidity (without condensation)</strong>:</li>
<ul>
<li>0 to 90% (0°C to 35°C)</li>
<li>0 to 70% (35°C to 55°C)</li>
</ul>
<li><strong>Temperature Coefficient</strong>:</li>
<ul>
<li>-10°C to 18°C, 28°C to 55°C, ±0.005% of range per °C</li>
</ul>
</ul>
<h3>Safety Specifications</h3>
<ul>
<li><strong>Safety</strong>: CSA C22.2 No. 1010.1:1992</li>
<li><strong>EMC</strong>: EN50082-1:1992 and EN55022:1994 Class B</li>
<li><strong>Maximum Voltage</strong>: 30 V</li>
</ul>
<h3>Mechanical and General Specifications</h3>
<ul>
<li><strong>Size</strong>: 152 x 70 x 41 mm</li>
<li><strong>Weight</strong>: 224 g (340 g including holster)</li>
<li><strong>Batteries</strong>: One 9 V Alkaline battery</li>
<li><strong>Warranty</strong>: Three years</li>
<li><strong>Shock and Vibration</strong>: Per MIL-T-28800 for a Class 2 Instrument</li>
<li><strong>Display Current and % of Span</strong>: Yes</li>
<li><strong>Auto Step, Auto Ramp</strong>: Yes</li>
<li><strong>Span Check</strong>: Yes</li>
</ul>


Fluke 707 Current Loop Calibrator With Quick Click Knob

fluke 707 current loop calibrator quick click knob kalibrator arus dengan kenop klik cepat calibrators gelung semasa tombol pantas fluke/福禄克 电流环路校准器，带快速旋钮 福禄克