FLUKE

Test & Measurement

test-measurement

Current Clamps

current-clamps

Electrical Power Testing

electrical-power-testing

Multimeter Leads

multimeter-leads

IT & Electronics

it-electronics

Remote Controls

remote-controls

Test Probes

test-probes

Fluke TL71-1 Test Lead Kit, Cat Iii, Cat Iv, 10A

 Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.

• Both test leads and probes available
• Durable connection, which guarantees excellent results
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.

Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.

FLUKE Multimeter Leads, Shrouded Plug Connector Type, 10A Current Rating - TL71-1

Get the most from your multimeter with this test lead set from FLUKE. It connects high-precision 2mm probes to your measuring device. This lets you measure voltage, current or electrical resistance to a high degree of accuracy, so it's a dependable choice for μV measurements. Thanks to their hardy silicone insulator, these flexible cables can handle extremes of temperature, so they won't lose their cool when the heat is on. WearGuard technology adds another level of safety by exposing a contrasting colour when the leads are damaged, so you can rest assured your multimeter will deliver reliable results every time.

• Ergonomic probe design offers a comfortable grip
• 1.5m length means you can reach hard-to-access spots
• Right-angled plugs help reduce strain on your connectors for a long service life

• Electrical engineering
• Automotive servicing
• Manufacturing industry 

<h3 class="md-block-header-three">Fluke TL71-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li>Lead Type	Test Lead Kit</li><li>Connector Type	Right Angle</li><li>Lead Length	1.5m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000V</li><li>Safety Category	CATII 1000V</li><li>Safety Category Level	CAT III, CAT IV</li></ul> Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Multimeter Leads, Shrouded Plug Connector Type, 10A Current Rating - TL71-1Get the most from your multimeter with this test lead set from FLUKE. It connects high-precision 2mm probes to your measuring device. This lets you measure voltage, current or electrical resistance to a high degree of accuracy, so it&#x27;s a dependable choice for μV measurements. Thanks to their hardy silicone insulator, these flexible cables can handle extremes of temperature, so they won&#x27;t lose their cool when the heat is on. WearGuard technology adds another level of safety by exposing a contrasting colour when the leads are damaged, so you can rest assured your multimeter will deliver reliable results every time.Features &amp; Benefits• Ergonomic probe design offers a comfortable grip • 1.5m length means you can reach hard-to-access spots • Right-angled plugs help reduce strain on your connectors for a long service lifeApplications• Electrical engineering • Automotive servicing • Manufacturing industry

<h3>Fluke TL71-1 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>Lead Type	Test Lead Kit</li>
<li>Connector Type	Right Angle</li>
<li>Lead Length	1.5m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000V</li>
<li>Safety Category	CATII 1000V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
&nbsp;Fluke multimeters benefit from the availability of a comprehensive range of extra and replacement Fluke test leads, probes and accessories.
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Multimeter Leads, Shrouded Plug Connector Type, 10A Current Rating - TL71-1
Get the most from your multimeter with this test lead set from FLUKE. It connects high-precision 2mm probes to your measuring device. This lets you measure voltage, current or electrical resistance to a high degree of accuracy, so it's a dependable choice for μV measurements. Thanks to their hardy silicone insulator, these flexible cables can handle extremes of temperature, so they won't lose their cool when the heat is on. WearGuard technology adds another level of safety by exposing a contrasting colour when the leads are damaged, so you can rest assured your multimeter will deliver reliable results every time.
Features &amp; Benefits
• Ergonomic probe design offers a comfortable grip 
• 1.5m length means you can reach hard-to-access spots 
• Right-angled plugs help reduce strain on your connectors for a long service life
Applications
• Electrical engineering 
• Automotive servicing 
• Manufacturing industry&nbsp;

TL71-1 premium test lead set

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke tl71-1 test lead kit, cat iii, iv, 10a kit kabel uji tl71-1, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl71-1-test-lead-kit-cat-iii-cat-iv-10a

Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A

Safety Category	CAT III 1000 V, CAT IV 600V

Each test lead covered by two layers of silicone insulation
Extra-heavy strain relief on probe-end and plug-end
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2
Probes always show correct category rating for tip being used
Environmental ratings -20°C to +55°C
Conforms to safety standard EN61010-031: 2008

One pair (red, black) Fluke TL175 TwistGuard™ Test Leads
Exposed probe tip length from 19mm to 4mm

FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175

Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.

• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind

• Household outlets
• Switch testing
• Manufacturing facilities
• Automotive industry
 

<h3 class="md-block-header-three">Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Test Lead Kit</li><li>Product Type	Test leads</li><li>Connector Type	Shrouded</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Minimum Operating Temperature	-20°C</li><li>Maximum Operating Temperature	+55°C</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features &amp; BenefitsEach test lead covered by two layers of silicone insulation Extra-heavy strain relief on probe-end and plug-end Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 Probes always show correct category rating for tip being used Environmental ratings -20°C to +55°C Conforms to safety standard EN61010-031: 2008What are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.Supplied withOne pair (red, black) Fluke TL175 TwistGuard™ Test Leads Exposed probe tip length from 19mm to 4mmFLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.Features &amp; Benefits• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it&#x27;s a versatile piece of kit • CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety • Double silicone insulation is resistant to oil and solvent damage, for a longer service life • Probes always display the correct category rating for the tip exposure used, giving you added peace of mindApplications• Household outlets • Switch testing • Manufacturing facilities • Automotive industry

<h3>Fluke TL175 Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Test Lead Kit</li>
<li>Product Type	Test leads</li>
<li>Connector Type	Shrouded</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Minimum Operating Temperature	-20°C</li>
<li>Maximum Operating Temperature	+55°C</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features &amp; Benefits
Each test lead covered by two layers of silicone insulation 
Extra-heavy strain relief on probe-end and plug-end 
Universal input plugs compatible with all instruments that accept standard mm shrouded banana plugs 
Ratings: CAT II 1000 V, CAT III 1000 V, CAT IV 600 V, 10 A max., Pollution Degree 2 
Probes always show correct category rating for tip being used 
Environmental ratings -20°C to +55°C 
Conforms to safety standard EN61010-031: 2008
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
Supplied with
One pair (red, black) Fluke TL175 TwistGuard™ Test Leads 
Exposed probe tip length from 19mm to 4mm
FLUKE Multimeter Leads, Test Lead Kit Type, 10A Current Rating - TL175
Get a clear read on electrical signals with this test lead kit from FLUKE. Plug one end into your multimeter and use the probe on the other to measure circuit metrics including voltage, current and resistance. The extendable tips are adjustable to between 4 and 19mm, delivering pinpoint accuracy in different testing setups. Sturdy strain relief at both ends supports a reliable connection that you can rest assured will go the distance.
Features &amp; Benefits
• Compatible with instruments that accept standard 4mm shrouded banana plugs, so it's a versatile piece of kit 
• CAT IV 600V rating indicates it can withstand voltage surges of up to 8000V, for reliable user safety 
• Double silicone insulation is resistant to oil and solvent damage, for a longer service life 
• Probes always display the correct category rating for the tip exposure used, giving you added peace of mind
Applications
• Household outlets 
• Switch testing 
• Manufacturing facilities 
• Automotive industry 
&nbsp;

TL175 Data Sheet

Instruction Sheet - TL175

fluke tl175 test lead kit, cat iii, iv, 10a kit kabel uji tl175, electrical power testing pengujian daya listrik petunjuk ujian tenaga elektrik fluke/福禄克 测试引线套件，cat iii、cat iv，10a 电力测试 福禄克

fluke-tl175-test-lead-kit-cat-iii-cat-iv-10a

The TL220, SureGrip™ Industrial Test Lead Set is designed to provide a reliable grip in slippery hands. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors. 

The TL220, SureGrip™ Industrial Test Lead Set is designed to provide a reliable grip in slippery hands. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.

The TL220, SureGrip™ Industrial Test Lead Set is designed to provide a reliable grip in slippery hands. With interchangeable test lead set for multiple electrical applications. Compatible with all instruments and test probes that accept standard 4 mm shrouded banana connectors.&nbsp;

Matthew Lee

Fluke TL220 Suregrip Industrial Test Lead Set

fluke tl220 suregrip industrial test lead set kabel uji industri multimeter leads plumbum ujian perindustrian fluke/福禄克 工业测试线组 福禄克

fluke-tl220-suregrip-industrial-test-lead-set

Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A

FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1

When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you'll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they're widely compatible with your existing devices.

• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots
• Nickel-plated jaws resist corrosion, so deliver a long service life
• Sharp 12mm stainless steel tip provides reliable contact for results you can rely on
• Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial use

• Factory automation
• Heavy industrial equipment
• Automotive servicing 

<h3 class="md-block-header-three">Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Industrial Test Lead Kit</li><li>Connector Type	Straight to Right Angle</li><li>Lead Length	1.6m</li><li>Current Rating	10A</li><li>Safety Category Voltage	1000 V, 600V</li><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li></ul>Features and Benefits• Both test leads and probes available • Durable connection, which guarantees excellent results • Single accessories and kits • Different safety categories to suit the application • Insulated wiresWhat are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.What are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you&#x27;ll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they&#x27;re widely compatible with your existing devices.Features &amp; Benefits• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots • Nickel-plated jaws resist corrosion, so deliver a long service life • Sharp 12mm stainless steel tip provides reliable contact for results you can rely on • Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial useApplications• Factory automation • Heavy industrial equipment • Automotive servicing

<h3>Fluke TL220-1 Industrial Test Lead Kit, Cat Iii, Cat Iv, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Industrial Test Lead Kit</li>
<li>Connector Type	Straight to Right Angle</li>
<li>Lead Length	1.6m</li>
<li>Current Rating	10A</li>
<li>Safety Category Voltage	1000 V, 600V</li>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
</ul>
Features and Benefits
• Both test leads and probes available 
• Durable connection, which guarantees excellent results 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
FLUKE Industrial Test Lead Kit, Banana Connector Type, 10A Current Rating - TL220-1
When you need an assortment of adaptable accessories for your multimeter, grab this industrial test lead kit from FLUKE. The probes feature SureGrip technology for a reliable hold even when your hands are slippery, which makes field measurements a cinch. Each kit comes complete with a TP220 test probe, a TL222 silicone test lead set and an AC220 alligator clip set so you'll always have the right tool for the job. Because the 4mm banana plugs follow a standard connector design, they're widely compatible with your existing devices.
Features &amp; Benefits
• Generous 1.5m lead length offers easy manoeuvrability in hard-to-reach spots 
• Nickel-plated jaws resist corrosion, so deliver a long service life 
• Sharp 12mm stainless steel tip provides reliable contact for results you can rely on 
• Meets 1000V CAT III and 600V CAT IV requirements, so the kit is a safe choice for industrial use
Applications
• Factory automation 
• Heavy industrial equipment 
• Automotive servicing&nbsp;

SureGrip TL220 industrial test lead kit

Datasheet - TL220-1

fluke tl220-1 industrial test lead kit, cat iii, iv, 10a kit kabel uji industri tl220-1, multimeter leads utama ujian perindustrian fluke/福禄克 工业测试引线套件，cat iii、cat iv，10a 福禄克

fluke-tl220-1-industrial-test-lead-kit-cat-iii-cat-iv-10a

Fluke TP165X Remote Control Probe, for Use With 1500 Series, 1650 Series

 Need a simple solution to carry out tests in hard-to-access places? Extend the reach of your multifunction tester with this remote control probe from FLUKE. Just plug in the pre-terminated connector and get the measurements you need, even in confined nooks and crannies. The small 1mm tip finds its way into the most remote areas to eliminate guesswork. These spot-on readings let you speed up troubleshooting and get back to work quickly.

• One-handed operation makes the job easier
• Test button lets you keep an eye on the panel during inspections
• Works with different testing equipment for versatility
• Red and black colour-coded lead, connector and probe for easy identification

• Electrical engineering
• Automotive industry
• HCAV equipment
• Food and beverage processing systems 

<h3 class="md-block-header-three">Fluke TP165X Remote Control Probe, for Use With 1500 Series, 1650 Series</h3><ul class="md-block-unordered-list-item"><li>Accessory Type	Remote Control Probe</li><li>For Use With	1500 Series, 1650 Series</li></ul> Need a simple solution to carry out tests in hard-to-access places? Extend the reach of your multifunction tester with this remote control probe from FLUKE. Just plug in the pre-terminated connector and get the measurements you need, even in confined nooks and crannies. The small 1mm tip finds its way into the most remote areas to eliminate guesswork. These spot-on readings let you speed up troubleshooting and get back to work quickly.Features &amp; Benefits• One-handed operation makes the job easier • Test button lets you keep an eye on the panel during inspections • Works with different testing equipment for versatility • Red and black colour-coded lead, connector and probe for easy identificationApplications• Electrical engineering • Automotive industry • HCAV equipment • Food and beverage processing systems

<h3>Fluke TP165X Remote Control Probe, for Use With 1500 Series, 1650 Series</h3>
<ul>
<li>Accessory Type	Remote Control Probe</li>
<li>For Use With	1500 Series, 1650 Series</li>
</ul>
&nbsp;Need a simple solution to carry out tests in hard-to-access places? Extend the reach of your multifunction tester with this remote control probe from FLUKE. Just plug in the pre-terminated connector and get the measurements you need, even in confined nooks and crannies. The small 1mm tip finds its way into the most remote areas to eliminate guesswork. These spot-on readings let you speed up troubleshooting and get back to work quickly.
Features &amp; Benefits
• One-handed operation makes the job easier 
• Test button lets you keep an eye on the panel during inspections 
• Works with different testing equipment for versatility 
• Red and black colour-coded lead, connector and probe for easy identification
Applications
• Electrical engineering 
• Automotive industry 
• HCAV equipment 
• Food and beverage processing systems&nbsp;

Bedienungshandbuch

Fluke 165X User Manual

Fluke 165X User Manual Suppliment

fluke tp165x remote control probe, use 1500 series, 1650 series probe kontrol jarak jauh tp165x, untuk digunakan dengan seri 1500, controls remot siasatan kawalan siri alat fluke/福禄克 远程控制探头，适用于 系列、1650 系列 遥控器 福禄克

fluke-tp165x-remote-control-probe-for-use-with-1500-series-1650-series

Fluke STL120-IV Shielded Test Lead Set 600V Cat Iv 

Maximum Signal Voltage: 600 V rms, CAT III per IEC 1010-2-031
 

Maximum Voltage to Ground: 600 V rms, CAT III per IEC 1010-2-031
 

<h3 class="md-block-header-three">Fluke STL120-IV Shielded Test Lead Set 600V Cat Iv </h3>Features and Benefits:<ul class="md-block-unordered-list-item"><li>Bandwidth: 12.5 MHz </li><li>Maximum Signal Voltage: 600 V rms, CAT III per IEC 1010-2-031 </li><li>Maximum Voltage to Ground: 600 V rms, CAT III per IEC 1010-2-031 </li><li>Maximum Current: 1 A</li></ul>

<h3>Fluke STL120-IV Shielded Test Lead Set 600V Cat Iv&nbsp;</h3>
Features and Benefits:
<ul>
<li>Bandwidth: 12.5 MHz 
&nbsp;</li>
<li>Maximum Signal Voltage: 600 V rms, CAT III per IEC 1010-2-031 
&nbsp;</li>
<li>Maximum Voltage to Ground: 600 V rms, CAT III per IEC 1010-2-031 
&nbsp;</li>
<li>Maximum Current: 1 A</li>
</ul>

Fluke STL120-IV Shielded Test Lead Set 600V Cat Iv

fluke stl120-iv shielded test lead set 600v cat iv kabel uji terlindung probes plumbum ujian fluke/福禄克 屏蔽测试线组 福禄克

fluke-stl120-iv-shielded-test-lead-set-600v-cat-iv

 Brought to you by Fluke, an automotive test lead kit. Supplied with various accessories to suit automotive specialists, this test lead kit is an excellent addition to its intended application. All models are highly reliable and excellent quality.


• Supplied with a case for organisation
• Tested to 60 V dc
• Highly durable
• SureGrip accessory collection


These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.


Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.


What are the differences between safety categories?

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.


• TP81 Insulations piercing clip set
• Tl224 SureGrip silicone test lead set
• TP220 SureGrip test probe set
• AC220 SureGrip alligator clip set
• AC285 SureGrip large jaw alligator clip set
• Soft case 

<h3 class="md-block-header-three">Fluke TLK281 Automotive Test Lead Kit</h3> Brought to you by Fluke, an automotive test lead kit. Supplied with various accessories to suit automotive specialists, this test lead kit is an excellent addition to its intended application. All models are highly reliable and excellent quality. <h3 class="md-block-header-three">Features and Benefits</h3>• Supplied with a case for organisation • Tested to 60 V dc • Highly durable • SureGrip accessory collection <h3 class="md-block-header-three">What are test leads?</h3>These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. <h3 class="md-block-header-three">What are test probes?</h3>Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. <h3 class="md-block-header-three">What are the differences between safety categories?</h3>For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe. <h3 class="md-block-header-three">Kit Contents</h3>• TP81 Insulations piercing clip set • Tl224 SureGrip silicone test lead set • TP220 SureGrip test probe set • AC220 SureGrip alligator clip set • AC285 SureGrip large jaw alligator clip set • Soft case

<h3>Fluke TLK281 Automotive Test Lead Kit</h3>
&nbsp;Brought to you by Fluke, an automotive test lead kit. Supplied with various accessories to suit automotive specialists, this test lead kit is an excellent addition to its intended application. All models are highly reliable and excellent quality. 

<h3>Features and Benefits</h3>
• Supplied with a case for organisation 
• Tested to 60 V dc 
• Highly durable 
• SureGrip accessory collection 

<h3>What are test leads?</h3>
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured. 

<h3>What are test probes?</h3>
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision. 

<h3>What are the differences between safety categories?</h3>
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe. 

<h3>Kit Contents</h3>
• TP81 Insulations piercing clip set 
• Tl224 SureGrip silicone test lead set 
• TP220 SureGrip test probe set 
• AC220 SureGrip alligator clip set 
• AC285 SureGrip large jaw alligator clip set 
• Soft case&nbsp;

Fluke TLK281 Automotive Test Lead Kit

fluke tlk281 automotive test lead kit kabel uji otomotif electrical power testing pengujian daya listrik utama ujian automotif tenaga elektrik fluke/福禄克 汽车测试引线套件 电力测试 福禄克

fluke-tlk281-automotive-test-lead-kit

 Brought to you by Fluke, a range of high voltage probes suitable for use with Fluke multimeters. These probes, mounted on a high-quality lead, can measure voltages from 6000 V up to 40,000 V, dependent on the model. All models are highly reliable and excellent quality.


• Insulated lead attached to each probe
• Excellent quality test probes
• Banana plug connector
• CAT I safety category


Two high voltage probes that can measure multimeter voltages up to 6000 V or 40,000 V.


Only suitable for low energy applications

FLUKE Test Probe, 0 to 6kV Voltage Measurement Range, 1000:1 Division Ratio - 532424

Get the inside scoop on your electrical circuits with this test probe from FLUKE. It's designed to work with your AC/DC voltmeter and extend its measuring capacity up to 6kV, making it suitable for use in energy-limited circuits. The unit is constructed with your safety in mind, as it has a plastic cover that provides a barrier between you and the signals being assessed, preventing electric shock. Easily link up the probe to your test equipment with its banana plug fitting.


• Safe for use in challenging conditions thanks to an operating temperature range between 0°C and +50°C
• Accuracy of ±1% at frequencies below 500Hz for precise measurement
• Light weight of 12.7g makes it easy to handle during operation
• Performs reliably in RH up to 80%, so it's suitable for use in humid settings


• Consumer electronics
• Medical equipment
• HVAC systems
• Automotive wiring


How do I ensure accurate readings with this probe?

To be sure of precise measurements with this tool, you must check that the frequency is not above 1kHz. Output reading fails on this unit above that threshold.
 

<h3 class="md-block-header-three">Fluke 80K-6 Test Probe, 6kV</h3> Brought to you by Fluke, a range of high voltage probes suitable for use with Fluke multimeters. These probes, mounted on a high-quality lead, can measure voltages from 6000 V up to 40,000 V, dependent on the model. All models are highly reliable and excellent quality. <h3 class="md-block-header-three">Features and Benefits</h3>• Insulated lead attached to each probe • Excellent quality test probes • Banana plug connector • CAT I safety category <h3 class="md-block-header-three">What are test probes?</h3>Two high voltage probes that can measure multimeter voltages up to 6000 V or 40,000 V. <h3 class="md-block-header-three">What are the differences between safety categories?</h3>For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe. <h3 class="md-block-header-three">Note</h3>Only suitable for low energy applications<h3 class="md-block-header-three">FLUKE Test Probe, 0 to 6kV Voltage Measurement Range, 1000:1 Division Ratio - 532424</h3>Get the inside scoop on your electrical circuits with this test probe from FLUKE. It&#x27;s designed to work with your AC/DC voltmeter and extend its measuring capacity up to 6kV, making it suitable for use in energy-limited circuits. The unit is constructed with your safety in mind, as it has a plastic cover that provides a barrier between you and the signals being assessed, preventing electric shock. Easily link up the probe to your test equipment with its banana plug fitting. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Safe for use in challenging conditions thanks to an operating temperature range between 0°C and +50°C • Accuracy of ±1% at frequencies below 500Hz for precise measurement • Light weight of 12.7g makes it easy to handle during operation • Performs reliably in RH up to 80%, so it&#x27;s suitable for use in humid settings <h3 class="md-block-header-three">Applications</h3>• Consumer electronics • Medical equipment • HVAC systems • Automotive wiring <h3 class="md-block-header-three">How do I ensure accurate readings with this probe?</h3>To be sure of precise measurements with this tool, you must check that the frequency is not above 1kHz. Output reading fails on this unit above that threshold.

<h3>Fluke 80K-6 Test Probe, 6kV</h3>
&nbsp;Brought to you by Fluke, a range of high voltage probes suitable for use with Fluke multimeters. These probes, mounted on a high-quality lead, can measure voltages from 6000 V up to 40,000 V, dependent on the model. All models are highly reliable and excellent quality. 

<h3>Features and Benefits</h3>
• Insulated lead attached to each probe 
• Excellent quality test probes 
• Banana plug connector 
• CAT I safety category 

<h3>What are test probes?</h3>
Two high voltage probes that can measure multimeter voltages up to 6000 V or 40,000 V. 

<h3>What are the differences between safety categories?</h3>
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe. 

<h3>Note</h3>
Only suitable for low energy applications
<h3>FLUKE Test Probe, 0 to 6kV Voltage Measurement Range, 1000:1 Division Ratio - 532424</h3>
Get the inside scoop on your electrical circuits with this test probe from FLUKE. It's designed to work with your AC/DC voltmeter and extend its measuring capacity up to 6kV, making it suitable for use in energy-limited circuits. The unit is constructed with your safety in mind, as it has a plastic cover that provides a barrier between you and the signals being assessed, preventing electric shock. Easily link up the probe to your test equipment with its banana plug fitting. 

<h3>Features &amp; Benefits</h3>
• Safe for use in challenging conditions thanks to an operating temperature range between 0°C and +50°C 
• Accuracy of ±1% at frequencies below 500Hz for precise measurement 
• Light weight of 12.7g makes it easy to handle during operation 
• Performs reliably in RH up to 80%, so it's suitable for use in humid settings 

<h3>Applications</h3>
• Consumer electronics 
• Medical equipment 
• HVAC systems 
• Automotive wiring 

<h3>How do I ensure accurate readings with this probe?</h3>
To be sure of precise measurements with this tool, you must check that the frequency is not above 1kHz. Output reading fails on this unit above that threshold. 
&nbsp;

Fluke 80K-6 Test Probe, 6kV

fluke 80k-6 test probe, 6kv probe uji 80k-6, probes siasatan ujian fluke/福禄克 测试探头，6kv 福禄克

fluke-80k-6-test-probe-6kv

Fluke TLK287 Electronic Test Lead Kit, Cat Ii, Cat Iii, 10A

Connector Type	Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug

Safety Category	CAT II 300 V, CAT III 1000V

• Various accessories included in the kit
• Durable parts
• Single accessories and kits
• Different safety categories to suit the application
• Insulated wires

Modular 4mm test leads (black and red)
Modular Probes (black and red)
Medium crocodile clips (black and red)
Spade lug/banana jack plated, set
Couplers IEC1010 (black and red)
TL910 precision electronic probe set with multiple spring-loaded 1mm diameter sharp tips to maximize contact with SMD test points
Minigrabber with integral leads and 4mm shrouded plugs (black and red)
Micrograbbers (black and red) for fine SMD test
Micrograbber leads (black and red)
Quadfold Carry Pouch

FLUKE Test Lead Kit, For Digital Multimeter, Removable and Insulated IC Cap - FLUKE TLK287

Keen to test out your circuit's performance? Put your devices through their paces with this FLUKE test lead kit. By combining probes, leads and clips, it covers many electronic testing needs in one handy product. Don't worry about the set's probes slipping off conductors as their spring-loaded tips easily achieve a strong connection. Simple banana plug connectors mean the leads hook up to digital multimeters (such as 156-730) in no time. As it handles current ratings up to 10A, the set's a safe bet for use with everyday electrical loads.

• Silicone test lead sheaths for effective resistance to heat and cold
• Comes in a handy Velcro-sealed pouch with transparent pockets for convenient storage and handling
• Test lead length of 1.5m for easily reaching awkward circuit areas
• Insulated alligator clips to cut exposure to dangerous electrical loads
• Test leads and probes match multimeter colour coding for quick identification

• Semiconductor manufacturing
• Automotive industry
• Power distribution networks 

<h3 class="md-block-header-three">Fluke TLK287 Electronic Test Lead Kit, Cat Ii, Cat Iii, 10A</h3><ul class="md-block-unordered-list-item"><li> Lead Type	Electronic Test Lead Kit</li><li>Connector Type	Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug</li><li>Fused	No</li><li>Lead Length	1.5m</li><li>Current Rating	10 A, 2 A, 5A</li><li>Safety Category Voltage	1000 V, 300V</li><li>Safety Category	CAT II 300 V, CAT III 1000V</li><li>Safety Category Level	CAT II, CAT III</li></ul>Features and Benefits• Various accessories included in the kit • Durable parts • Single accessories and kits • Different safety categories to suit the application • Insulated wiresKit ContentsModular 4mm test leads (black and red) Modular Probes (black and red) Medium crocodile clips (black and red) Spade lug/banana jack plated, set Couplers IEC1010 (black and red) TL910 precision electronic probe set with multiple spring-loaded 1mm diameter sharp tips to maximize contact with SMD test points Minigrabber with integral leads and 4mm shrouded plugs (black and red) Micrograbbers (black and red) for fine SMD test Micrograbber leads (black and red) Quadfold Carry PouchWhat are test probes?Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.What are test leads?These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.FLUKE Test Lead Kit, For Digital Multimeter, Removable and Insulated IC Cap - FLUKE TLK287Keen to test out your circuit&#x27;s performance? Put your devices through their paces with this FLUKE test lead kit. By combining probes, leads and clips, it covers many electronic testing needs in one handy product. Don&#x27;t worry about the set&#x27;s probes slipping off conductors as their spring-loaded tips easily achieve a strong connection. Simple banana plug connectors mean the leads hook up to digital multimeters (such as 156-730) in no time. As it handles current ratings up to 10A, the set&#x27;s a safe bet for use with everyday electrical loads.Features &amp; Benefits• Silicone test lead sheaths for effective resistance to heat and cold • Comes in a handy Velcro-sealed pouch with transparent pockets for convenient storage and handling • Test lead length of 1.5m for easily reaching awkward circuit areas • Insulated alligator clips to cut exposure to dangerous electrical loads • Test leads and probes match multimeter colour coding for quick identificationApplications• Semiconductor manufacturing • Automotive industry • Power distribution networks

<h3>Fluke TLK287 Electronic Test Lead Kit, Cat Ii, Cat Iii, 10A</h3>
<ul>
<li>&nbsp;Lead Type	Electronic Test Lead Kit</li>
<li>Connector Type	Banana Jack, Coupler, Crocodile Clip, Micrograbber, Spade Lug</li>
<li>Fused	No</li>
<li>Lead Length	1.5m</li>
<li>Current Rating	10 A, 2 A, 5A</li>
<li>Safety Category Voltage	1000 V, 300V</li>
<li>Safety Category	CAT II 300 V, CAT III 1000V</li>
<li>Safety Category Level	CAT II, CAT III</li>
</ul>
Features and Benefits
• Various accessories included in the kit 
• Durable parts 
• Single accessories and kits 
• Different safety categories to suit the application 
• Insulated wires
Kit Contents
Modular 4mm test leads (black and red) 
Modular Probes (black and red) 
Medium crocodile clips (black and red) 
Spade lug/banana jack plated, set 
Couplers IEC1010 (black and red) 
TL910 precision electronic probe set with multiple spring-loaded 1mm diameter sharp tips to maximize contact with SMD test points 
Minigrabber with integral leads and 4mm shrouded plugs (black and red) 
Micrograbbers (black and red) for fine SMD test 
Micrograbber leads (black and red) 
Quadfold Carry Pouch
What are test probes?
Connecting to Fluke multimeters, a set of test probes will measure the device or target for an accurate reading, such as voltage or current. Due to the flexibility and quality produced by Fluke, each probe provides much-needed precision.
What are test leads?
These leads are connecting cables which are used specifically for Multimeters, attaching a test probe to the end will allow the user to measure the required voltage, current or electrical resistance. As it assists operation with a multimeter, at least two of these types of electrical values are measured.
FLUKE Test Lead Kit, For Digital Multimeter, Removable and Insulated IC Cap - FLUKE TLK287
Keen to test out your circuit's performance? Put your devices through their paces with this FLUKE test lead kit. By combining probes, leads and clips, it covers many electronic testing needs in one handy product. Don't worry about the set's probes slipping off conductors as their spring-loaded tips easily achieve a strong connection. Simple banana plug connectors mean the leads hook up to digital multimeters (such as 156-730) in no time. As it handles current ratings up to 10A, the set's a safe bet for use with everyday electrical loads.
Features &amp; Benefits
• Silicone test lead sheaths for effective resistance to heat and cold 
• Comes in a handy Velcro-sealed pouch with transparent pockets for convenient storage and handling 
• Test lead length of 1.5m for easily reaching awkward circuit areas 
• Insulated alligator clips to cut exposure to dangerous electrical loads 
• Test leads and probes match multimeter colour coding for quick identification
Applications
• Semiconductor manufacturing 
• Automotive industry 
• Power distribution networks&nbsp;

TLK287 Electronics Master Test Lead Set Data Sheet

Datasheet - FLUKE TLK287

fluke tlk287 electronic test lead kit, cat ii, iii, 10a kit kabel uji elektronik tlk287, electrical power testing pengujian daya listrik plumbum ujian tenaga elektrik fluke/福禄克 电子测试引线套件，cat ii，cat iii，10a 电力测试 福禄克

fluke-tlk287-electronic-test-lead-kit-cat-ii-cat-iii-10a

• 2500 A ac current measurement with select Fluke meters
• Works with frequency, inrush, and min/max functions on select Fluke meters
• Large loop size and thin 7.5mm cross section allow measurement of awkward sized conductors with improved access in crowded spaces
• CAT IV 600V, CAT III 1000 V safety rating
• Compatible with Fluke 374, 375, 376 & 381 clamp meters

For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.

FLUKE Multimeter Leads, Flexible Current Probe, 500Hz Operating Frequency - iFlex Series - i2500-18

Are you looking to beef up your collection of multimeter leads? Add this flexible current probe from FLUKE to your kit. It expands your device's measurement range to 2500V AC, so is ideal for getting the lowdown on your heavy-duty machinery. Thanks to the 0.1A resolution, you'll get precise measurements you can bank on. The large and bendy loop makes it a breeze to measure bulky or awkward conductors. To use the lead, unclip the loop and pass it around the cable you're measuring. Then reconnect the head by pushing it into the slot and twisting to secure it.

• Ergonomic design for one-handed use
• Slim 7.5mm coil diameter gets into tight spaces easily
• Links directly to your testing tool without any additional connectors

• Manufacturing facilities
• Automotive sector
• Aerospace industry 

<h3 class="md-block-header-three">Fluke I2500-18 Current Probe</h3><ul class="md-block-unordered-list-item"><li>Safety Category	CAT III 1000 V, CAT IV 600V</li><li>Safety Category Level	CAT III, CAT IV</li><li>Safety Category Voltage	600 V, 1000V</li></ul>Features and Benefits• 2500 A ac current measurement with select Fluke meters • Works with frequency, inrush, and min/max functions on select Fluke meters • Large loop size and thin 7.5mm cross section allow measurement of awkward sized conductors with improved access in crowded spaces • CAT IV 600V, CAT III 1000 V safety rating • Compatible with Fluke 374, 375, 376 &amp; 381 clamp metersWhat are the differences between safety categories?For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.FLUKE Multimeter Leads, Flexible Current Probe, 500Hz Operating Frequency - iFlex Series - i2500-18Are you looking to beef up your collection of multimeter leads? Add this flexible current probe from FLUKE to your kit. It expands your device&#x27;s measurement range to 2500V AC, so is ideal for getting the lowdown on your heavy-duty machinery. Thanks to the 0.1A resolution, you&#x27;ll get precise measurements you can bank on. The large and bendy loop makes it a breeze to measure bulky or awkward conductors. To use the lead, unclip the loop and pass it around the cable you&#x27;re measuring. Then reconnect the head by pushing it into the slot and twisting to secure it.Features &amp; Benefits• Ergonomic design for one-handed use • Slim 7.5mm coil diameter gets into tight spaces easily • Links directly to your testing tool without any additional connectorsApplications• Manufacturing facilities • Automotive sector • Aerospace industry

<h3>Fluke I2500-18 Current Probe</h3>
<ul>
<li>Safety Category	CAT III 1000 V, CAT IV 600V</li>
<li>Safety Category Level	CAT III, CAT IV</li>
<li>Safety Category Voltage	600 V, 1000V</li>
</ul>
Features and Benefits
• 2500 A ac current measurement with select Fluke meters 
• Works with frequency, inrush, and min/max functions on select Fluke meters 
• Large loop size and thin 7.5mm cross section allow measurement of awkward sized conductors with improved access in crowded spaces 
• CAT IV 600V, CAT III 1000 V safety rating 
• Compatible with Fluke 374, 375, 376 &amp; 381 clamp meters
What are the differences between safety categories?
For protection, safety categories are an important attribute which must be taken into consideration for any electronic test equipment. With any category (i.e CAT I, CAT II), a higher voltage will indicate a higher level of protection. As an example, a test probe providing CAT II 1000 V, provides a higher degree of protection than a CAT II 400 V probe.
FLUKE Multimeter Leads, Flexible Current Probe, 500Hz Operating Frequency - iFlex Series - i2500-18
Are you looking to beef up your collection of multimeter leads? Add this flexible current probe from FLUKE to your kit. It expands your device's measurement range to 2500V AC, so is ideal for getting the lowdown on your heavy-duty machinery. Thanks to the 0.1A resolution, you'll get precise measurements you can bank on. The large and bendy loop makes it a breeze to measure bulky or awkward conductors. To use the lead, unclip the loop and pass it around the cable you're measuring. Then reconnect the head by pushing it into the slot and twisting to secure it.
Features &amp; Benefits
• Ergonomic design for one-handed use 
• Slim 7.5mm coil diameter gets into tight spaces easily 
• Links directly to your testing tool without any additional connectors
Applications
• Manufacturing facilities 
• Automotive sector 
• Aerospace industry&nbsp;