Center

FLUKE

Test & Measurement

test-measurement

Clamp Meters

clamp-meters

Current Clamps

current-clamps

Test Probes

test-probes

Fluke I6000S FLEX-24 Current Probe, Ac, Rogowski Coil Adapter, 6kA Ac Ac Max

 The Probes can be used to measure ac current up to 6000 A. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes.


EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
600 V rms Category III, Pollution Degree 2.
EN 61326 : 1998 +A1, A2, & A3

FLUKE Current Probe, Rogowski Measuring Principle, 100 kOhm Minimum Load Impedance - I6000S FLEX-24

Keep tabs on current levels in your circuits and appliances with this probe from FLUKE. It works together with an oscilloscope to sense charges passing through conductors then convert the measured value to a readable voltage signal. Because this multitasker can monitor between 60 and 6000A of AC current, you'll find it suitable for simple as well as heavy-duty applications. Thanks to a ±1% accuracy, you can count on this probe to give you pinpoint readings every time.
• 2m cable length for comfortable connection with other equipment
• Broad operating temperature range between -20°C and +90°C for use in challenging conditions
• Powered by two MN 1500 LR6 alkaline batteries, eliminating the need for a wired connection to a mains energy source
• Integrated low battery indicator lets you know when it's time to replace them


• Measurement and instrumentation equipment
• HVAC equipment
• Robotics and automation systems


Yes, this unit's flexible lead and slim body enables you to get it into cramped, hard-to-reach work areas 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke I6000S FLEX-24 Current Probe, Ac, Rogowski Coil Adapter, 6kA Ac Ac Max</strong></h3><p class="md-block-unstyled"> The Probes can be used to measure ac current up to 6000 A. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Standards</strong></h3><p class="md-block-unstyled">EN 61010-1: 2001<br/>EN 61010-2-032: 2002<br/>EN 61010-031: 2002<br/>600 V rms Category III, Pollution Degree 2.<br/>EN 61326 : 1998 +A1, A2, &amp; A3</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Current Probe, Rogowski Measuring Principle, 100 kOhm Minimum Load Impedance - I6000S FLEX-24</strong></h3><p class="md-block-unstyled">Keep tabs on current levels in your circuits and appliances with this probe from FLUKE. It works together with an oscilloscope to sense charges passing through conductors then convert the measured value to a readable voltage signal. Because this multitasker can monitor between 60 and 6000A of AC current, you&#x27;ll find it suitable for simple as well as heavy-duty applications. Thanks to a ±1% accuracy, you can count on this probe to give you pinpoint readings every time.<br/>• 2m cable length for comfortable connection with other equipment<br/>• Broad operating temperature range between -20°C and +90°C for use in challenging conditions<br/>• Powered by two MN 1500 LR6 alkaline batteries, eliminating the need for a wired connection to a mains energy source<br/>• Integrated low battery indicator lets you know when it&#x27;s time to replace them<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Measurement and instrumentation equipment<br/>• HVAC equipment<br/>• Robotics and automation systems<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Can I use this probe in tight spots?</strong></h3><p class="md-block-unstyled">Yes, this unit&#x27;s flexible lead and slim body enables you to get it into cramped, hard-to-reach work areas </p>

<h3><strong>Fluke I6000S FLEX-24 Current Probe, Ac, Rogowski Coil Adapter, 6kA Ac Ac Max</strong></h3>
<p>&nbsp;The Probes can be used to measure ac current up to 6000 A. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes.<br>
</p>
<h3><strong>Standards</strong></h3>
<p>EN 61010-1: 2001<br>
EN 61010-2-032: 2002<br>
EN 61010-031: 2002<br>
600 V rms Category III, Pollution Degree 2.<br>
EN 61326 : 1998 +A1, A2, &amp; A3</p>
<h3><strong>FLUKE Current Probe, Rogowski Measuring Principle, 100 kOhm Minimum Load Impedance - I6000S FLEX-24</strong></h3>
<p>Keep tabs on current levels in your circuits and appliances with this probe from FLUKE. It works together with an oscilloscope to sense charges passing through conductors then convert the measured value to a readable voltage signal. Because this multitasker can monitor between 60 and 6000A of AC current, you'll find it suitable for simple as well as heavy-duty applications. Thanks to a ±1% accuracy, you can count on this probe to give you pinpoint readings every time.<br>
• 2m cable length for comfortable connection with other equipment<br>
• Broad operating temperature range between -20°C and +90°C for use in challenging conditions<br>
• Powered by two MN 1500 LR6 alkaline batteries, eliminating the need for a wired connection to a mains energy source<br>
• Integrated low battery indicator lets you know when it's time to replace them<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Measurement and instrumentation equipment<br>
• HVAC equipment<br>
• Robotics and automation systems<br>
</p>
<h3><strong>Can I use this probe in tight spots?</strong></h3>
<p>Yes, this unit's flexible lead and slim body enables you to get it into cramped, hard-to-reach work areas&nbsp;</p>


RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

buyerIntroduction

fluke i6000s flex-24 current probe, ac, rogowski coil adapter, 6ka ac max probe arus flex-24, adaptor kumparan rogowski, maks test probes arus, penyesuai gegelung fluke/福禄克 电流探头，交流，罗氏线圈适配器，最大 交流 福禄克

fluke-i6000s-flex-24-current-probe-ac-rogowski-coil-adapter-6ka-ac-ac-max

Fluke I3000S FLEX-36 Current Probe, Ac, Rogowski Coil Adapter, 3kA Ac Ac Max, Current Output

 Standard AC current pliers Inspired by the principle of the Rogowski coil.
Can measure intensity up to 3000 A when used with oscilloscopes and recorders.
Its flexible measurement head is light and can be easily and quickly installed into hard-to-reach places.
Three ranges: 30 A, 300 A and 3000 A, 1, 10 or 100 mV/A output.
Maximal conductor diameter: 178 mm.
Certified CAT III 600 V.


2 AA batteries, BNC adaptor/male 4 mm plug and user manual.

FLUKE Current Probe, 400h Battery Life, 2m Cable - I3000S FLEX-36

Need to know how much current is flowing through your circuits? This current probe from FLUKE lets you find out with a single touch. The unit's Rogowski coil adapter means it calculates the current level by sensing the voltage generated from the AC magnetic field in the conductor. To bring your measurement full circle, you can connect the probe to your oscilloscope or a digital recorder that tracks changes in the value. As it's designed to handle a maximum conductor diameter of 914mm, this device helps you stay in the thick of things when measuring large conductors.


• Best accuracy of ±1% for reliable testing
• Cable length of 2m helps enable long-distance operation
• Battery life of 400 hours for lasting performance


• Robotic systems
• Medical technology
• Electrical engineering
• Control panels


What's the difference between a current probe and a current clamp?

Current probes don't have jaws like current clamps, so you can carry out tests on your circuits without physical contact. They are typically combined with external measuring instruments like oscilloscopes. When you pair this probe with an oscilloscope, you can measure currents of up to 3000A AC, making it suitable for use with heavy-duty equipment.
 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke I3000S FLEX-36 Current Probe, Ac, Rogowski Coil Adapter, 3kA Ac Ac Max, Current Output</strong></h3><p class="md-block-unstyled"> Standard AC current pliers Inspired by the principle of the Rogowski coil.<br/>Can measure intensity up to 3000 A when used with oscilloscopes and recorders.<br/>Its flexible measurement head is light and can be easily and quickly installed into hard-to-reach places.<br/>Three ranges: 30 A, 300 A and 3000 A, 1, 10 or 100 mV/A output.<br/>Maximal conductor diameter: 178 mm.<br/>Certified CAT III 600 V.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">2 AA batteries, BNC adaptor/male 4 mm plug and user manual.</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Current Probe, 400h Battery Life, 2m Cable - I3000S FLEX-36</strong></h3><p class="md-block-unstyled">Need to know how much current is flowing through your circuits? This current probe from FLUKE lets you find out with a single touch. The unit&#x27;s Rogowski coil adapter means it calculates the current level by sensing the voltage generated from the AC magnetic field in the conductor. To bring your measurement full circle, you can connect the probe to your oscilloscope or a digital recorder that tracks changes in the value. As it&#x27;s designed to handle a maximum conductor diameter of 914mm, this device helps you stay in the thick of things when measuring large conductors.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features &amp; Benefits</strong></h3><p class="md-block-unstyled">• Best accuracy of ±1% for reliable testing<br/>• Cable length of 2m helps enable long-distance operation<br/>• Battery life of 400 hours for lasting performance<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Robotic systems<br/>• Medical technology<br/>• Electrical engineering<br/>• Control panels<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">What&#x27;s the difference between a current probe and a current clamp?</strong></h3><p class="md-block-unstyled">Current probes don&#x27;t have jaws like current clamps, so you can carry out tests on your circuits without physical contact. They are typically combined with external measuring instruments like oscilloscopes. When you pair this probe with an oscilloscope, you can measure currents of up to 3000A AC, making it suitable for use with heavy-duty equipment.<br/> </p>

<h3><strong>Fluke I3000S FLEX-36 Current Probe, Ac, Rogowski Coil Adapter, 3kA Ac Ac Max, Current Output</strong></h3>
<p>&nbsp;Standard AC current pliers Inspired by the principle of the Rogowski coil.<br>
Can measure intensity up to 3000 A when used with oscilloscopes and recorders.<br>
Its flexible measurement head is light and can be easily and quickly installed into hard-to-reach places.<br>
Three ranges: 30 A, 300 A and 3000 A, 1, 10 or 100 mV/A output.<br>
Maximal conductor diameter: 178 mm.<br>
Certified CAT III 600 V.<br>
</p>
<h3><strong>Supplied with</strong></h3>
<p>2 AA batteries, BNC adaptor/male 4 mm plug and user manual.</p>
<h3><strong>FLUKE Current Probe, 400h Battery Life, 2m Cable - I3000S FLEX-36</strong></h3>
<p>Need to know how much current is flowing through your circuits? This current probe from FLUKE lets you find out with a single touch. The unit's Rogowski coil adapter means it calculates the current level by sensing the voltage generated from the AC magnetic field in the conductor. To bring your measurement full circle, you can connect the probe to your oscilloscope or a digital recorder that tracks changes in the value. As it's designed to handle a maximum conductor diameter of 914mm, this device helps you stay in the thick of things when measuring large conductors.<br>
</p>
<h3><strong>Features &amp; Benefits</strong></h3>
<p>• Best accuracy of ±1% for reliable testing<br>
• Cable length of 2m helps enable long-distance operation<br>
• Battery life of 400 hours for lasting performance<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Robotic systems<br>
• Medical technology<br>
• Electrical engineering<br>
• Control panels<br>
</p>
<h3><strong>What's the difference between a current probe and a current clamp?</strong></h3>
<p>Current probes don't have jaws like current clamps, so you can carry out tests on your circuits without physical contact. They are typically combined with external measuring instruments like oscilloscopes. When you pair this probe with an oscilloscope, you can measure currents of up to 3000A AC, making it suitable for use with heavy-duty equipment.<br>
&nbsp;</p>


fluke i3000s flex-36 current probe, ac, rogowski coil adapter, 3ka ac max, output probe arus flex-36, adaptor kumparan rogowski, maks, keluaran test probes arus, penyesuai gegelung fluke/福禄克 电流探头，交流，罗氏线圈适配器，最大 交流，电流输出 福禄克

fluke-i3000s-flex-36-current-probe-ac-rogowski-coil-adapter-3ka-ac-ac-max-current-output

Fluke i3000S Current Probe, Ac, Rogowski Coil Adapter, 3kA Ac Ac Max, Voltage Output

 Suitable for use with oscilloscopes, recorders and data loggers
a.c. coupled output (no d.c. offset)
Voltage output of 3V full scale for each range
Fits around conductors up to 160mm diameter
Extended battery life and external power supply input
Meets BS EN61010 – 1 Cat III 600V
Extended working temperature range -20°C to +90°C
Conforms to EN61010-1 CAT III 600V


2 x AA alkaline batteries, BNC to 4mm plug adaptor and operator's manual.

FLUKE Current Probe, 178mm Maximum Conductor Size, 2m Cable - i3000s Series - 2584888

Stretch the reach of your oscilloscopes, recorders and data loggers with this current probe from FLUKE. It measures up to 3kA AC, giving you the accurate readings you need to verify and debug electrical circuits. Thanks to the product's 2m cable length, you can access those hard-to-reach spaces and extend your measuring scope. For comfortable handling, the head weighs only 180g. This current probe has compact dimensions of 116 (L) x 68.5 (W) x 30mm (D) so it's a space-saving addition to your toolbox.


• Two AA alkaline batteries included for convenience
• CAT III 600V approval indicates the unit passed IEC safety testing
• Extensive operational temperature range between -20°C and +90°C for use in demanding conditions


• Medical devices
• Automotive industry
• Research facilities
• Engineering workshops


What size conductors should I use with this current probe?

The component handles conductors of up to 178mm for versatility.


Electromagnetic flux fields form around live conductors. Current probes sense these and convert them to a measured voltage for a device, such as an oscilloscope, to pick up and relay as a waveform. 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke i3000S Current Probe, Ac, Rogowski Coil Adapter, 3kA Ac Ac Max, Voltage Output</strong></h3><p class="md-block-unstyled"> Suitable for use with oscilloscopes, recorders and data loggers<br/>a.c. coupled output (no d.c. offset)<br/>Voltage output of 3V full scale for each range<br/>Fits around conductors up to 160mm diameter<br/>Extended battery life and external power supply input<br/>Meets BS EN61010 – 1 Cat III 600V<br/>Extended working temperature range -20°C to +90°C<br/>Conforms to EN61010-1 CAT III 600V<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Supplied with</strong></h3><p class="md-block-unstyled">2 x AA alkaline batteries, BNC to 4mm plug adaptor and operator&#x27;s manual.</p><h3 class="md-block-header-three"><strong class="md-inline-bold">FLUKE Current Probe, 178mm Maximum Conductor Size, 2m Cable - i3000s Series - 2584888</strong></h3><p class="md-block-unstyled">Stretch the reach of your oscilloscopes, recorders and data loggers with this current probe from FLUKE. It measures up to 3kA AC, giving you the accurate readings you need to verify and debug electrical circuits. Thanks to the product&#x27;s 2m cable length, you can access those hard-to-reach spaces and extend your measuring scope. For comfortable handling, the head weighs only 180g. This current probe has compact dimensions of 116 (L) x 68.5 (W) x 30mm (D) so it&#x27;s a space-saving addition to your toolbox.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features &amp; Benefits</strong></h3><p class="md-block-unstyled">• Two AA alkaline batteries included for convenience<br/>• CAT III 600V approval indicates the unit passed IEC safety testing<br/>• Extensive operational temperature range between -20°C and +90°C for use in demanding conditions<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Applications</strong></h3><p class="md-block-unstyled">• Medical devices<br/>• Automotive industry<br/>• Research facilities<br/>• Engineering workshops<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">What size conductors should I use with this current probe?</strong></h3><p class="md-block-unstyled">The component handles conductors of up to 178mm for versatility.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">How does a current probe work?</strong></h3><p class="md-block-unstyled">Electromagnetic flux fields form around live conductors. Current probes sense these and convert them to a measured voltage for a device, such as an oscilloscope, to pick up and relay as a waveform. </p>

<h3><strong>Fluke i3000S Current Probe, Ac, Rogowski Coil Adapter, 3kA Ac Ac Max, Voltage Output</strong></h3>
<p>&nbsp;Suitable for use with oscilloscopes, recorders and data loggers<br>
a.c. coupled output (no d.c. offset)<br>
Voltage output of 3V full scale for each range<br>
Fits around conductors up to 160mm diameter<br>
Extended battery life and external power supply input<br>
Meets BS EN61010 – 1 Cat III 600V<br>
Extended working temperature range -20°C to +90°C<br>
Conforms to EN61010-1 CAT III 600V<br>
</p>
<h3><strong>Supplied with</strong></h3>
<p>2 x AA alkaline batteries, BNC to 4mm plug adaptor and operator's manual.</p>
<h3><strong>FLUKE Current Probe, 178mm Maximum Conductor Size, 2m Cable - i3000s Series - 2584888</strong></h3>
<p>Stretch the reach of your oscilloscopes, recorders and data loggers with this current probe from FLUKE. It measures up to 3kA AC, giving you the accurate readings you need to verify and debug electrical circuits. Thanks to the product's 2m cable length, you can access those hard-to-reach spaces and extend your measuring scope. For comfortable handling, the head weighs only 180g. This current probe has compact dimensions of 116 (L) x 68.5 (W) x 30mm (D) so it's a space-saving addition to your toolbox.<br>
</p>
<h3><strong>Features &amp; Benefits</strong></h3>
<p>• Two AA alkaline batteries included for convenience<br>
• CAT III 600V approval indicates the unit passed IEC safety testing<br>
• Extensive operational temperature range between -20°C and +90°C for use in demanding conditions<br>
</p>
<h3><strong>Applications</strong></h3>
<p>• Medical devices<br>
• Automotive industry<br>
• Research facilities<br>
• Engineering workshops<br>
</p>
<h3><strong>What size conductors should I use with this current probe?</strong></h3>
<p>The component handles conductors of up to 178mm for versatility.<br>
</p>
<h3><strong>How does a current probe work?</strong></h3>
<p>Electromagnetic flux fields form around live conductors. Current probes sense these and convert them to a measured voltage for a device, such as an oscilloscope, to pick up and relay as a waveform.&nbsp;</p>


fluke i3000s current probe, ac, rogowski coil adapter, 3ka ac max, voltage output probe arus i3000s, adaptor kumparan rogowski, maks, tegangan keluaran test probes siasatan penyesuai gegelung voltan fluke/福禄克 电流探头，交流，罗氏线圈适配器，最大 交流，电压输出 福禄克

fluke-i3000s-current-probe-ac-rogowski-coil-adapter-3ka-ac-ac-max-voltage-output

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers (optional BNC connector sold seperately). The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas 

<p class="md-block-unstyled">The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers (optional BNC connector sold seperately). The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas </p>

<p>The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers (optional BNC connector sold seperately). The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas&nbsp;</p>


Matthew Lee

Fluke I2000 Flex Ac Current Clamp

fluke i2000 flex ac current clamp penjepit arus clamps pengapit fluke/福禄克 柔性交流电流钳 福禄克

fluke-i2000-flex-ac-current-clamp

Fluke I6000S FLEX-36 Current Probe, Ac, Rogowski Coil Adapter, 6kA Ac Ac Max

 The Fluke flex AC current probe is a 36in state of the art device used to measure 6000A. Probes can be used with oscilloscopes, digital multimeters, recorders, or data loggers. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes. The probes provide a low-voltage (3VAC) output that is proportional to the current being measured.


Flexible
Accuracy of ±1 %
Lightweight
Head cable length is 915mm (double insulated)
Head bend radius is 38.1mm
Frequency range is from 10Hz to 50kHz (-3 dB)


EN 61010-1: 2001
EN 61010-2-032: 2002
EN 61010-031: 2002
600V rms category III, pollution degree 2
EN 61326 : 1998 +A1, A2, and A3
CAT III 600V
 

<h3 class="md-block-header-three"><strong class="md-inline-bold">Fluke I6000S FLEX-36 Current Probe, Ac, Rogowski Coil Adapter, 6kA Ac Ac Max</strong></h3><p class="md-block-unstyled"> The Fluke flex AC current probe is a 36in state of the art device used to measure 6000A. Probes can be used with oscilloscopes, digital multimeters, recorders, or data loggers. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes. The probes provide a low-voltage (3VAC) output that is proportional to the current being measured.<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Features and Benefits</strong></h3><p class="md-block-unstyled">Flexible<br/>Accuracy of ±1 %<br/>Lightweight<br/>Head cable length is 915mm (double insulated)<br/>Head bend radius is 38.1mm<br/>Frequency range is from 10Hz to 50kHz (-3 dB)<br/></p><h3 class="md-block-header-three"><strong class="md-inline-bold">Certifications</strong></h3><p class="md-block-unstyled">EN 61010-1: 2001<br/>EN 61010-2-032: 2002<br/>EN 61010-031: 2002<br/>600V rms category III, pollution degree 2<br/>EN 61326 : 1998 +A1, A2, and A3<br/>CAT III 600V<br/> </p>

<h3><strong>Fluke I6000S FLEX-36 Current Probe, Ac, Rogowski Coil Adapter, 6kA Ac Ac Max</strong></h3>
<p>&nbsp;The Fluke flex AC current probe is a 36in state of the art device used to measure 6000A. Probes can be used with oscilloscopes, digital multimeters, recorders, or data loggers. The flexible measuring head allows current measurements on conductors that are hard to reach or inaccessible using typical clamp-on current probes. The probes provide a low-voltage (3VAC) output that is proportional to the current being measured.<br>
</p>
<h3><strong>Features and Benefits</strong></h3>
<p>Flexible<br>
Accuracy of ±1 %<br>
Lightweight<br>
Head cable length is 915mm (double insulated)<br>
Head bend radius is 38.1mm<br>
Frequency range is from 10Hz to 50kHz (-3 dB)<br>
</p>
<h3><strong>Certifications</strong></h3>
<p>EN 61010-1: 2001<br>
EN 61010-2-032: 2002<br>
EN 61010-031: 2002<br>
600V rms category III, pollution degree 2<br>
EN 61326 : 1998 +A1, A2, and A3<br>
CAT III 600V<br>
&nbsp;</p>


fluke i6000s flex-36 current probe, ac, rogowski coil adapter, 6ka ac max probe arus flex-36, adaptor kumparan rogowski, maks test probes arus, penyesuai gegelung fluke/福禄克 电流探头，交流，罗氏线圈适配器，最大 交流 福禄克

fluke-i6000s-flex-36-current-probe-ac-rogowski-coil-adapter-6ka-ac-ac-max

Center 26_18 Flexible Ac Clamp Meter (18″ Coil) 

Output Resolution (LCD Display): 0.01A/0.1A/1A

8.5mm coil diameter allows measurement in tight spaces (Double insulated)

18” flexible sensor fit around conductors up to 5.8”in diameter

30A/300A/3000A : 0.01A/0.1A/1A : ±3%rdg ± 5dgts

Display: 4 digital Liquid display, Maximum reading 3150

Probe Cable Length: 10″ (254mm); 18″ (458mm)

<h3 class="md-block-header-three"><strong class="md-inline-bold">Center 26_18 Flexible Ac Clamp Meter (18″ Coil)</strong> </h3><ul class="md-block-unordered-list-item"><li>Measurement Ranges: 30A/300A/3000A AC</li><li>Output Resolution (LCD Display): 0.01A/0.1A/1A</li><li>8.5mm coil diameter allows measurement in tight spaces (Double insulated)</li><li>18” flexible sensor fit around conductors up to 5.8”in diameter</li><li>TRMS Reading </li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Specifications:</strong></p><ul class="md-block-unordered-list-item"><li><strong class="md-inline-bold">Range:</strong></li><ul class="md-block-unordered-list-item"><li>30A/300A/3000A : 0.01A/0.1A/1A : ±3%rdg ± 5dgts</li></ul><li><strong class="md-inline-bold">Frequency Range:</strong> 45~500Hz</li><li><strong class="md-inline-bold">Phase Error:</strong> &lt; ±1°</li><li><strong class="md-inline-bold">Position Sensitivity:</strong> ±3%</li><li><strong class="md-inline-bold">Display:</strong> 4 digital Liquid display, Maximum reading 3150</li><li><strong class="md-inline-bold">Sampling Rate:</strong> 2 times/sec</li><li><strong class="md-inline-bold">Battery:</strong> 1.5V, size AAA battery x 2</li><li><strong class="md-inline-bold">Probe Cable Length:</strong> 10″ (254mm); 18″ (458mm)</li><li><strong class="md-inline-bold">Dimensions (Meter):</strong> 120 x 70 x 26 mm</li><li><strong class="md-inline-bold">Weight:</strong> approx. 286g</li></ul>

<h3><strong>Center 26_18 Flexible Ac Clamp Meter (18″ Coil)</strong>&nbsp;</h3>
<ul>
<li>Measurement Ranges: 30A/300A/3000A AC</li>
<li>Output Resolution (LCD Display): 0.01A/0.1A/1A</li>
<li>8.5mm coil diameter allows measurement in tight spaces (Double insulated)</li>
<li>18” flexible sensor fit around conductors up to 5.8”in diameter</li>
<li>TRMS Reading&nbsp;</li>
</ul>
<p><strong>Specifications:</strong></p>
<ul>
<li><strong>Range:</strong></li>
<ul>
<li>30A/300A/3000A : 0.01A/0.1A/1A : ±3%rdg ± 5dgts</li>
</ul>
<li><strong>Frequency Range:</strong> 45~500Hz</li>
<li><strong>Phase Error:</strong> &lt; ±1°</li>
<li><strong>Position Sensitivity:</strong> ±3%</li>
<li><strong>Display:</strong> 4 digital Liquid display, Maximum reading 3150</li>
<li><strong>Sampling Rate:</strong> 2 times/sec</li>
<li><strong>Battery:</strong> 1.5V, size AAA battery x 2</li>
<li><strong>Probe Cable Length:</strong> 10″ (254mm); 18″ (458mm)</li>
<li><strong>Dimensions (Meter):</strong> 120 x 70 x 26 mm</li>
<li><strong>Weight:</strong> approx. 286g</li>
</ul>
