SCHNEIDER ELECTRIC

Electricals

electricals

Surge Protection Devices

surge-protection-devices

SCHNEIDER ELECTRIC iPRD40 Modular Surge Arrester - 2P - 350V A9L40200

This Acti9 iPRD surge arrester protects 2P installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for high risk level and incoming panel board. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. This Acti9 iPRD40 is compatible with TT and TN-S earthing system.  This Acti9 iPRD40 is compatible with TT and TN-S earthing system.  The Up Voltage protection level in common mode (between phase and earth) is 1.4kV.  The Ue rated operational voltage is 230VAC +/- 10%. The product colour is white (RAL9003).The dimensions are (W) 36mm x (H) 85mm x (D) 69mm. The weight is 217g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.         

<h3 class="md-block-header-three"><strong class="md-inline-bold">SCHNEIDER ELECTRIC iPRD40 Modular Surge Arrester - 2P - 350V A9L40200</strong></h3><p class="md-block-unstyled">This Acti9 iPRD surge arrester protects 2P installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for high risk level and incoming panel board. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. This Acti9 iPRD40 is compatible with TT and TN-S earthing system.  This Acti9 iPRD40 is compatible with TT and TN-S earthing system.  The Up Voltage protection level in common mode (between phase and earth) is 1.4kV.  The Ue rated operational voltage is 230VAC +/- 10%. The product colour is white (RAL9003).The dimensions are (W) 36mm x (H) 85mm x (D) 69mm. The weight is 217g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.         </p>

<h3><strong>SCHNEIDER ELECTRIC iPRD40 Modular Surge Arrester - 2P - 350V A9L40200</strong></h3>
<p>This Acti9 iPRD surge arrester protects 2P installations. It allows quick replacement of damaged cartridges. This Type 2 device is recommended for high risk level and incoming panel board. It can be turned over to allow the phase/neutral/earth cables to enter through either the top or the bottom. The associated circuit breaker Isc breaking capacity can go up to 50kA. This Acti9 iPRD40 is compatible with TT and TN-S earthing system.  This Acti9 iPRD40 is compatible with TT and TN-S earthing system.  The Up Voltage protection level in common mode (between phase and earth) is 1.4kV.  The Ue rated operational voltage is 230VAC +/- 10%. The product colour is white (RAL9003).The dimensions are (W) 36mm x (H) 85mm x (D) 69mm. The weight is 217g. The degree of protection is IP20 and IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product is compliant with EN 61643-11 and IEC 61643-11 standards.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;</p>


A9L40200 iPRD40 modular surge arrester - 2P - 350V

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Contactors

Plugs & Connector 

Light Bulbs

Led Lights

Junction & Enclosure Box

Other Electrical Accessories

Button Switch

Doreen Tan

buyerIntroduction

Schneider Electric A9L40200 2P - iPRD40 Modular Surge Arrester

schneider electric a9l40200 2p iprd40 modular surge arrester penahan lonjakan protection devices perangkat perlindungan penangkap alat pelindung electric/施耐德电气 模块化浪涌保护器 电涌保护器 施耐德电气

schneider-electric-a9l40200-2p-iprd40-modular-surge-arrester

Abb OVR T2 3N 40-275 P TS QS Surge Protective Device Arrester Ii 100KA 4P

Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with "TS" are optionally equipped with a auxiliary contact. The variants with "reserve varistor" (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected

Type of Low Voltage Distribution System:TT

Suitable For:To protect the systems against the transient overvoltage (lightning)

Nominal AC Voltage of the System (Uo):230 / 400 V

Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V

Temporary Overvoltage Test Value (UT):(L-N) 337 V

Rated Service Short-Circuit Breaking Capacity (Ics):100 kA

Discharge Current:Nominal (8 / 20 µs) 20 kA

Impulse Current:I (imp, 10 / 350 µs) 2 kA

Short-Circuit Protective Devices:gG Type Fuses N A

Options Provided:Residential, commercial building.

Auxiliary Circuit Load:Minimum 12Vdc - 10mA

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb OVR T2 3N 40-275 P TS QS Surge Protective Device Arrester Ii 100KA 4P</strong></h3><ul class="md-block-unordered-list-item"><li>Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with &quot;TS&quot; are optionally equipped with a auxiliary contact. The variants with &quot;reserve varistor&quot; (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected</li><li>Product Net Width:71.2 mm</li><li>Product Net Height:95.8 mm</li><li>Product Net Depth / Length:76.7 mm</li><li>Product Net Weight:0.6 kg</li><li>Unit of measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Standards:IEC 61643-11 / EN 61643-11</li><li>Type of Low Voltage Distribution System:TT</li><li>TN-S</li><li>Suitable For:To protect the systems against the transient overvoltage (lightning)</li><li>Rated Voltage (Ur):230 V AC</li><li>Nominal AC Voltage of the System (Uo):230 / 400 V</li><li>Voltage Rating DC:350 V</li><li>Voltage Protection Level ( Up):1.5 kV</li><li>(L-N) 1.25 kV</li><li>(N-PE) 1.4 kV</li><li>Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V</li><li>Temporary Overvoltage Test Value (UT):(L-N) 337 V</li><li>(N-PE) 1200 V</li><li>Rated Service Short-Circuit Breaking Capacity (Ics):100 kA</li><li>Discharge Current:Nominal (8 / 20 µs) 20 kA</li><li>I (max, 8 / 20 µs) 20 kA</li><li>Impulse Current:I (imp, 10 / 350 µs) 2 kA</li><li>Short Circuit Withstand Icc:100 kA</li><li>Power Loss:29 mW</li><li>Short-Circuit Protective Devices:gG Type Fuses N A</li><li>Arrester Class:II</li><li>Number of Poles:4</li><li>Number of Protected Poles:4</li><li>Number of Auxiliary Contacts NC:1</li><li>Number of Auxiliary Contacts NO:1</li><li>Number of Conductors:4</li><li>Position of Neutral Terminals:Right</li><li>Transmission Standard:Optic</li><li>Version:Plug-in</li><li>Mounting Type:DIN-Rail</li><li>Product Type:QS</li><li>Options Provided:Residential, commercial building.</li><li>Auxiliary Circuit Load:Minimum 12Vdc - 10mA</li><li>Maximum 250Vac - 1A</li><li>Preventive Maintenance Feature:No</li><li>Status Indicator:Yes</li><li>Fuse Size:4 modular spacing</li></ul><p class="md-block-unstyled"> </p>

<h3><strong>Abb OVR T2 3N 40-275 P TS QS Surge Protective Device Arrester Ii 100KA 4P</strong></h3>
<ul>
<li>Surge protective devices SPD type 2 protect low-voltage consumer systems against surge voltages as they are tested as SPD type 2 according to IEC 61643-11. The devices are compatible with the System pro M compact series. The SPD with "TS" are optionally equipped with a auxiliary contact. The variants with "reserve varistor" (s) offer additional protection for the system, as the SPD is not completely disconnected from the mains at the end of its service life, but with an additional smaller varistor still guarantees basic protection and the system thus until the surge arrester is replaced is still protected</li>
<li>Product Net Width:71.2 mm</li>
<li>Product Net Height:95.8 mm</li>
<li>Product Net Depth / Length:76.7 mm</li>
<li>Product Net Weight:0.6 kg</li>
<li>Unit of measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Standards:IEC 61643-11 / EN 61643-11</li>
<li>Type of Low Voltage Distribution System:TT</li>
<li>TN-S</li>
<li>Suitable For:To protect the systems against the transient overvoltage (lightning)</li>
<li>Rated Voltage (Ur):230 V AC</li>
<li>Nominal AC Voltage of the System (Uo):230 / 400 V</li>
<li>Voltage Rating DC:350 V</li>
<li>Voltage Protection Level ( Up):1.5 kV</li>
<li>(L-N) 1.25 kV</li>
<li>(N-PE) 1.4 kV</li>
<li>Maximum Continuous Operating Voltage (Uc):(L-PE) 275 V</li>
<li>Temporary Overvoltage Test Value (UT):(L-N) 337 V</li>
<li>(N-PE) 1200 V</li>
<li>Rated Service Short-Circuit Breaking Capacity (Ics):100 kA</li>
<li>Discharge Current:Nominal (8 / 20 µs) 20 kA</li>
<li>I (max, 8 / 20 µs) 20 kA</li>
<li>Impulse Current:I (imp, 10 / 350 µs) 2 kA</li>
<li>Short Circuit Withstand Icc:100 kA</li>
<li>Power Loss:29 mW</li>
<li>Short-Circuit Protective Devices:gG Type Fuses N A</li>
<li>Arrester Class:II</li>
<li>Number of Poles:4</li>
<li>Number of Protected Poles:4</li>
<li>Number of Auxiliary Contacts NC:1</li>
<li>Number of Auxiliary Contacts NO:1</li>
<li>Number of Conductors:4</li>
<li>Position of Neutral Terminals:Right</li>
<li>Transmission Standard:Optic</li>
<li>Version:Plug-in</li>
<li>Mounting Type:DIN-Rail</li>
<li>Product Type:QS</li>
<li>Options Provided:Residential, commercial building.</li>
<li>Auxiliary Circuit Load:Minimum 12Vdc - 10mA</li>
<li>Maximum 250Vac - 1A</li>
<li>Preventive Maintenance Feature:No</li>
<li>Status Indicator:Yes</li>
<li>Fuse Size:4 modular spacing</li>
</ul>
<p>&nbsp;</p>


Light Tubes

abb ovr t2 3n 40-275 ts qs surge protective device arrester ii 100ka 4p alat pelindung lonjakan protection devices perangkat perlindungan peranti penangkap 电涌保护器 避雷器