BEKO

PCE Instruments

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Cleaning

cleaning

Pedal Bins

pedal-bins

Pneumatic Air Tools & Equipments

pneumatic-air-tools-equipments

Pneumatic Regulators

pneumatic-regulators

35 LITRES RECTANGLE PLASTIC FOOT PEDAL STEP-ON BIN

Description: Featuring a Off-white rectangular structural, our pedal bin (HDPE) provides you with a handy and convenient solution for disposal.

Made from recyclable material, thus it is environment friendly.

Touchless lid. Step to lift the lid for waste disposal. Smooth inner surface make cleaning easier. No messy waste with a pair of trash bag holder; holds the plastic trash bag in place and capture all waste thrown in.  Keep the workplace tidy and organized at all times. 

Generously sized, this 35L bin is most suitable for kitchens and offices. Adding this sleek and classic evergreen design waste bin is large enough for kitchen waste but small enough to be tucked away effortlessly. 

Most ideal for Food Operator, Kitchens, Toilets, Bedrooms, Bathroom, Schools, Offices, Pantries, beside vending machines, Medical Centre, Dental Clinic, Hospital, Hospice, F&B, laboratory and under the cashier counters, etc. 

High-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code.

HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. 

The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.

HDPE is resistant to many different solvents.

Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.

· HDPE retains its rigid structure until its melting point is reached.

· Once in the melt state, this polymer can be easily molded into any desired shape.

· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.

· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.

· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.

· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.

· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.

· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.

· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.

· The resin identification code of HDPE is 2, it can be recycled easily.

· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.

· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.

To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded.

 #bin #dustbin #pedal #pedal bin #plastic #rectangular #kitchen #laundry #cheap #f&b #waste #garbage #trash #litter #robust #medicalcentre #hospital

35 LITRES RECTANGLE PLASTIC FOOT PEDAL STEP-ON BINModel: H35Capacity: 35-LitresDimensions (mm): 400 W x 300 D x 565 HtDescription: Featuring a Off-white rectangular structural, our pedal bin (HDPE) provides you with a handy and convenient solution for disposal.Made from recyclable material, thus it is environment friendly.Touchless lid. Step to lift the lid for waste disposal. Smooth inner surface make cleaning easier. No messy waste with a pair of trash bag holder; holds the plastic trash bag in place and capture all waste thrown in. Keep the workplace tidy and organized at all times. Generously sized, this 35L bin is most suitable for kitchens and offices. Adding this sleek and classic evergreen design waste bin is large enough for kitchen waste but small enough to be tucked away effortlessly. Most ideal for Food Operator, Kitchens, Toilets, Bedrooms, Bathroom, Schools, Offices, Pantries, beside vending machines, Medical Centre, Dental Clinic, Hospital, Hospice, F&amp;B, laboratory and under the cashier counters, etc. Material PropertiesHigh-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number &quot;2&quot; as its resin identification code.HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE. The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.HDPE is resistant to many different solvents. <h3 class="md-block-header-three">INTERESTING FACTS</h3>Why is HDPE so Popular?Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.Moldability· HDPE retains its rigid structure until its melting point is reached.· Once in the melt state, this polymer can be easily molded into any desired shape.· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.Resistance to Corrosion· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.Strength to Density Ratio· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.Recyclable· The resin identification code of HDPE is 2, it can be recycled easily.· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded. #bin #dustbin #pedal #pedal bin #plastic #rectangular #kitchen #laundry #cheap #f&amp;b #waste #garbage #trash #litter #robust #medicalcentre #hospital

35 LITRES RECTANGLE PLASTIC FOOT PEDAL STEP-ON BIN
Model: H35
Capacity: 35-Litres
Dimensions (mm): 400 W x 300 D x 565 Ht
Description: Featuring a Off-white rectangular structural, our pedal bin (HDPE) provides you with a handy and convenient solution for disposal.
Made from recyclable material, thus it is environment friendly.
Touchless lid. Step to lift the lid for waste disposal. Smooth inner surface make cleaning easier. No messy waste with a pair of trash bag holder; holds the plastic trash bag in place and capture all waste thrown in. Keep the workplace tidy and organized at all times.&nbsp;
Generously sized, this 35L bin is most suitable for kitchens and offices. Adding this sleek and classic evergreen design waste bin is large enough for kitchen waste but small enough to be tucked away effortlessly.&nbsp;
Most ideal for Food Operator, Kitchens, Toilets, Bedrooms, Bathroom, Schools, Offices, Pantries, beside vending machines, Medical Centre, Dental Clinic, Hospital, Hospice, F&amp;B, laboratory and under the cashier counters, etc.&nbsp;
&nbsp;Material Properties
High-density polyethylene (HDPE) is a thermoplastic polymer produced from the monomer ethylene. With a high strength-to-density ratio, HDPE is used in the production of plastic bottles, corrosion-resistant piping, geomembranes and plastic lumber. HDPE is commonly recycled, and has the number "2" as its resin identification code.
HDPE is known for its high strength-to-density ratio. The density of HDPE can range from 930 to 970 kg/m3. Although the density of HDPE is only marginally higher than that of low-density polyethylene, HDPE has little branching, giving it stronger intermolecular forces and tensile strength than LDPE.&nbsp;
The difference in strength exceeds the difference in density, giving HDPE a higher specific strength. It is also harder and more opaque and can withstand somewhat higher temperatures (120 °C/248 °F for short periods). High-density polyethylene, unlike polypropylene, cannot withstand normally required autoclaving conditions. The lack of branching is ensured by an appropriate choice of catalyst (e.g., Ziegler–Natta catalysts) and reaction conditions.
HDPE is resistant to many different solvents.

<h3>INTERESTING FACTS</h3>
Why is HDPE so Popular?
Products made of high density polyethylene are long-lasting and easy to maintain. Food stored in HDPE containers does not get contaminated by the polymer, making it quite safe for humans. Some important attributes of this polymer are highlighted in this subsection.
Moldability
· HDPE retains its rigid structure until its melting point is reached.
· Once in the melt state, this polymer can be easily molded into any desired shape.
· This property makes it an ideal choice in the production of food containers, water bottles, and plastic lumber.
Resistance to Corrosion
· This polymer is resistant to mould and rotting, making it an ideal choice for making underground water pipes.
· Since HDPE can be sterilized via boiling, it is safe to use for food containing purposes.
· Its resistance to many chemicals, such as mineral acids and cleaning fluids, make it easy to maintain. It is also resistant to many common solvents and acids.
Strength to Density Ratio
· The density of this polymer ranges from 930 kg/m3 to 930 kg/m3.
· The structure of HDPE is linear and it contains very little branching, resulting in stronger intermolecular forces.
· The tensile strength of high-density polyethylene is very high – it can withstand heavier loads than most of the other types of polyethylene.
Recyclable
· The resin identification code of HDPE is 2, it can be recycled easily.
· Despite being non-biodegradable, it is still considered an environmentally responsible plastic.
· Recycled HDPE is used in plastic furniture, automobile parts, and rubbish cans.
To summarize, high-density polyethylene owes its popularity to its low weight, high tensile strength, high impact resistance, resistance to chemicals and high temperatures, and its ability to be easily molded.
&nbsp;#bin #dustbin #pedal #pedal bin #plastic #rectangular #kitchen #laundry #cheap #f&amp;b #waste #garbage #trash #litter #robust #medicalcentre #hospital

Others

Indoor Bins

Label Papers

TAN CHONG HWEE

buyerIntroduction

35 Litres Rect. Plastic Foot Pedal Step-On Garbage Waste Bin - H35

35 litres rect. plastic foot pedal step-on garbage waste bin h35 tempat sampah plastik persegi panjang liter dengan kaki bins oem pijak tong oem/oem代工 升矩形塑料脚踏式垃圾桶 脚踏垃圾桶 oem代工

35-litres-rect-plastic-foot-pedal-step-on-garbage-waste-bin-h35

The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)   

During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production. 

Condensate discharge without compressed air loss                                                                  
The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2  emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve. 

The BEKOMAT® designed for quick and cost-effective servicing                                     
The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged. 

This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate.  

No loss of compressed air during draining                                                                                   
-Low operating costs 

Outstanding reliability                                                                                                                  
 1.Durable and resistant to dirt                                                                                                               2.Large valve diameters prevent the formation of emulsions ›                                                            
3.No delicate mechanical components                                                                                           
4.Suitable for temperatures up to +70 °C › 

Easy to install and virtually  maintenance-free                                                               
1.Versatile connection options                                                                                                                 
2.Easy exchange of service unit, even where space is confirmed with even in small areas  3.Servicing requires no installation work 

Automated operation and monitoring                                                                                      
1.Ready for integration into modern system monitoring installations                                 
2.Automatic start of self-cleaning process based on dirt particle load                                    
3.Service indicator warns operators in advance when the service unit needs to be replaced  

Please refer to Bekomat 31U Brochure in technical data sheets for Technical Performance of Product

Please refer to Bekomat 31U Installation manual in technical data sheets on steps to install Bekomat  31U Auto Drain Valve & Product's Certificate of Conformity

<h3 class="md-block-header-three">The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product) </h3>During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production. Condensate discharge without compressed air loss The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve. The BEKOMAT® designed for quick and cost-effective servicing The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged. This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate. No loss of compressed air during draining -Low operating costs Outstanding reliability 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 3.No delicate mechanical components 4.Suitable for temperatures up to +70 °C › Easy to install and virtually maintenance-free 1.Versatile connection options 2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work Automated operation and monitoring 1.Ready for integration into modern system monitoring installations 2.Automatic start of self-cleaning process based on dirt particle load 3.Service indicator warns operators in advance when the service unit needs to be replaced For More Information:Please refer to Bekomat 31U Brochure in technical data sheets for Technical Performance of ProductPlease refer to Bekomat 31U Installation manual in technical data sheets on steps to install Bekomat 31U Auto Drain Valve &amp; Product&#x27;s Certificate of Conformity

<h3>The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)&nbsp;&nbsp;&nbsp;</h3>
During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production.&nbsp;
<ins>Condensate discharge without compressed air loss</ins> 
The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve.&nbsp;
<ins>The BEKOMAT® designed for quick and cost-effective servicing</ins> 
The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged.&nbsp;
This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate.&nbsp;&nbsp;
<ins>No loss of compressed air during draining</ins> 
-Low operating costs&nbsp;
<ins>Outstanding reliability</ins> 
 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 
3.No delicate mechanical components 
4.Suitable for temperatures up to +70 °C ›&nbsp;
<ins>Easy to install and virtually maintenance-free</ins> 
1.Versatile connection options 
2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work&nbsp;
<ins>Automated operation and monitoring</ins> 
1.Ready for integration into modern system monitoring installations 
2.Automatic start of self-cleaning process based on dirt particle load 
3.Service indicator warns operators in advance when the service unit needs to be replaced&nbsp;&nbsp;
For More Information:
Please refer to Bekomat 31U Brochure in technical data sheets for Technical Performance of Product
Please refer to Bekomat 31U Installation manual in technical data sheets on steps to install Bekomat 31U Auto Drain Valve &amp; Product's Certificate of Conformity

Bekomat 31U Installation Manual

Bekomat 31U Brochure

Toshio

Bekomat 31U Auto Drain Valve the Bekomat® Designed for Quick and cost-effective Servicing

bekomat 31u auto drain valve bekomat® designed quick cost-effective servicing dirancang untuk servis yang cepat dan hemat biaya pneumatic regulators regulator pneumatik beko direka jimat pengatur beko/贝科 mat 自动排水阀 专为快速且经济高效的维修而设计 气动调节器 贝科

bekomat-31u-auto-drain-valve-the-bekomat-designed-for-quick-and-cost-effective-servicing

Bekomat 31U Auto Drain Valve Only

Bekomat 31U Auto Drain Valve with Gasket Kit

Bekomat 31U Auto Drain Valve w/wo additional Spare Parts

The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)    

Please refer to Bekomat 32U Brochure in technical data sheets for Technical Performance of Product

Please refer to Bekomat 32U Installation manual in technical data sheets on steps to install Bekomat  32U Auto Drain Valve & Product's Certificate of Conformity

<h3 class="md-block-header-three">The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product) </h3>During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production. Condensate discharge without compressed air loss The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve. The BEKOMAT® designed for quick and cost-effective servicing The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged. This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate. No loss of compressed air during draining -Low operating costs Outstanding reliability 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 3.No delicate mechanical components 4.Suitable for temperatures up to +70 °C › Easy to install and virtually maintenance-free 1.Versatile connection options 2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work Automated operation and monitoring 1.Ready for integration into modern system monitoring installations 2.Automatic start of self-cleaning process based on dirt particle load 3.Service indicator warns operators in advance when the service unit needs to be replaced For More Information:Please refer to Bekomat 32U Brochure in technical data sheets for Technical Performance of ProductPlease refer to Bekomat 32U Installation manual in technical data sheets on steps to install Bekomat 32U Auto Drain Valve &amp; Product&#x27;s Certificate of Conformity

<h3>The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)&nbsp;&nbsp;&nbsp;&nbsp;</h3>
During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production.&nbsp;
<ins>Condensate discharge without compressed air loss</ins> 
The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve.&nbsp;
<ins>The BEKOMAT® designed for quick and cost-effective servicing</ins> 
The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged.&nbsp;
This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate.&nbsp;&nbsp;
<ins>No loss of compressed air during draining</ins> 
-Low operating costs&nbsp;
<ins>Outstanding reliability</ins> 
 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 
3.No delicate mechanical components 
4.Suitable for temperatures up to +70 °C ›&nbsp;
<ins>Easy to install and virtually maintenance-free</ins> 
1.Versatile connection options 
2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work&nbsp;
<ins>Automated operation and monitoring</ins> 
1.Ready for integration into modern system monitoring installations 
2.Automatic start of self-cleaning process based on dirt particle load 
3.Service indicator warns operators in advance when the service unit needs to be replaced&nbsp;&nbsp;
For More Information:
Please refer to Bekomat 32U Brochure in technical data sheets for Technical Performance of Product
Please refer to Bekomat 32U Installation manual in technical data sheets on steps to install Bekomat 32U Auto Drain Valve &amp; Product's Certificate of Conformity

Bekomat 32U Brochure

Bekomat 32U Installation Manual

Bekomat 32U Auto Drain Valve the Bekomat® Designed for Quick and cost-effective Servicing

bekomat 32u auto drain valve bekomat® designed quick cost-effective servicing dirancang untuk servis yang cepat dan hemat biaya pneumatic regulators regulator pneumatik beko direka menjimatkan kos pengatur beko/贝科 mat 自动排水阀 专为快速且经济高效的维修而设计 气动调节器 贝科

bekomat-32u-auto-drain-valve-the-bekomat-designed-for-quick-and-cost-effective-servicing

Bekomat 32U Auto Drain Valve Only

Bekomat 32U Auto Drain Valve with Gasket Kit

Bekomat 32U Auto Drain Valve w/wo additional Spare Parts

The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)  

Please refer to Bekomat 33U Brochure in technical data sheets for Technical Performance of Product

Please refer to Bekomat 33U Installation manual in technical data sheets on steps to install Bekomat  33U Auto Drain Valve & Product's Certificate of Conformity

<h3 class="md-block-header-three">The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product) </h3>During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production. Condensate discharge without compressed air loss The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve. The BEKOMAT® designed for quick and cost-effective servicing The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged. This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate. No loss of compressed air during draining -Low operating costs Outstanding reliability 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 3.No delicate mechanical components 4.Suitable for temperatures up to +70 °C › Easy to install and virtually maintenance-free 1.Versatile connection options 2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work Automated operation and monitoring 1.Ready for integration into modern system monitoring installations 2.Automatic start of self-cleaning process based on dirt particle load 3.Service indicator warns operators in advance when the service unit needs to be replaced For More Information:Please refer to Bekomat 33U Brochure in technical data sheets for Technical Performance of ProductPlease refer to Bekomat 33U Installation manual in technical data sheets on steps to install Bekomat 33U Auto Drain Valve &amp; Product&#x27;s Certificate of Conformity

<h3>The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)&nbsp;&nbsp;</h3>
During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production.&nbsp;
<ins>Condensate discharge without compressed air loss</ins> 
The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve.&nbsp;
<ins>The BEKOMAT® designed for quick and cost-effective servicing</ins> 
The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged.&nbsp;
This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate.&nbsp;&nbsp;
<ins>No loss of compressed air during draining</ins> 
-Low operating costs&nbsp;
<ins>Outstanding reliability</ins> 
 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 
3.No delicate mechanical components 
4.Suitable for temperatures up to +70 °C ›&nbsp;
<ins>Easy to install and virtually maintenance-free</ins> 
1.Versatile connection options 
2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work&nbsp;
<ins>Automated operation and monitoring</ins> 
1.Ready for integration into modern system monitoring installations 
2.Automatic start of self-cleaning process based on dirt particle load 
3.Service indicator warns operators in advance when the service unit needs to be replaced&nbsp;&nbsp;
For More Information:
Please refer to Bekomat 33U Brochure in technical data sheets for Technical Performance of Product
Please refer to Bekomat 33U Installation manual in technical data sheets on steps to install Bekomat 33U Auto Drain Valve &amp; Product's Certificate of Conformity

Bekomat 33U Brochure

Bekomat 33U Installation Manual

Bekomat 33U Auto Drain Valve the Bekomat® Designed for Quick and cost-effective Servicing

bekomat 33u auto drain valve bekomat® designed quick cost-effective servicing dirancang untuk servis cepat dan hemat biaya pneumatic regulators regulator pneumatik beko direka menjimatkan kos pengatur beko/贝科 mat 自动排水阀 专为快速且经济高效的维修而设计 气动调节器 贝科

bekomat-33u-auto-drain-valve-the-bekomat-designed-for-quick-and-cost-effective-servicing

Bekomat 33U Auto Drain Valve Only

Bekomat 33U Auto Drain Valve with Gasket Kit

Bekomat 33U Auto Drain Valve w/wo additional Spare Parts

PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter 

PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.

The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.

When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust.

 – Particulate matter (PM) channels: PM 2.5, PM 10
– Particle sizes (in micrometers): 2.5 µm, 10 µm
– Temperature measuring range: 0 … +50 °C / +32 … +122 °F
– Humidity measuring range: 0 … 100 % RH
– 2″ full-color LCD with user-friendly graphics
– 220 x 176 pixel display resolution
– Displays temperature in degrees Celsius (°C) or Fahrenheit (°F)
– Powered by rechargeable battery or AC power (via USB port)
– Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go
– Includes a stand for attaching to the thread on the back of the device
– Features an internal memory for storing up to 5000 data sets
– Saved data is stamped with the time and date
– Takes measurements even while the battery is charging
– Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes
– Programmable alarm and automatic power-off battery-saving functionality 

<h3 class="md-block-header-three">PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter </h3>PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust. – Particulate matter (PM) channels: PM 2.5, PM 10 – Particle sizes (in micrometers): 2.5 µm, 10 µm – Temperature measuring range: 0 … +50 °C / +32 … +122 °F – Humidity measuring range: 0 … 100 % RH – 2″ full-color LCD with user-friendly graphics – 220 x 176 pixel display resolution – Displays temperature in degrees Celsius (°C) or Fahrenheit (°F) – Powered by rechargeable battery or AC power (via USB port) – Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go – Includes a stand for attaching to the thread on the back of the device – Features an internal memory for storing up to 5000 data sets – Saved data is stamped with the time and date – Takes measurements even while the battery is charging – Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes – Programmable alarm and automatic power-off battery-saving functionality

<h3>PCE Instruments PCE-MPC 10 Air Quality Particle Counting Meter&nbsp;</h3>
PCE-MPC 10 is a portable handheld particle counter used to monitor particulate matter (PM) concentrations in the air. Designed to aid in indoor air quality (IAQ) assessments, this particle counter also measures air temperature and relative humidity (RH). The particle counter can be powered either by the rechargeable battery or the USB port. The USB port also is used to charge the battery. The particle counter takes measurements even while the battery is charging, allowing for uninterrupted IAQ monitoring. The integrated data logger has an adjustable sampling time of 30 seconds, 1 minute, 2 minutes or 5 minutes, while the internal memory stores up to 5000 date-and-time-stamped data sets.
The particle counter displays all measurements simultaneously on the device’s 2″ full-color LCD screen. Temperature units can be shown in either degrees Celsius (°C) or Fahrenheit (°F). A scale below the measured values provides a visual warning via a band of colors increasing from green (safe) to violet (extreme danger). This visual color-coding system makes it easy to recognize when PM concentration levels become dangerous, allowing for quick action.
When inhaled, PM 2.5 and PM 10 particles can settle deep into the lungs and result in damaging health effects. Since the PCE-MPC 10 particle counter monitors PM 2.5 and PM 10 particles, the device has many practical health and safety applications. Heating, ventilation and air conditioning (HVAC) technicians use PM 2.5 and PM 10 particle counters for HVAC system performance and filtration audits. In addition, industrial hygienists and workplace safety professionals rely on PM 2.5 and PM 10 particle counters when evaluating occupational health and safety risks related to hazardous and combustible dust.
&nbsp;– Particulate matter (PM) channels: PM 2.5, PM 10 
– Particle sizes (in micrometers): 2.5 µm, 10 µm 
– Temperature measuring range: 0 … +50 °C / +32 … +122 °F 
– Humidity measuring range: 0 … 100 % RH 
– 2″ full-color LCD with user-friendly graphics 
– 220 x 176 pixel display resolution 
– Displays temperature in degrees Celsius (°C) or Fahrenheit (°F) 
– Powered by rechargeable battery or AC power (via USB port) 
– Portable handheld design for indoor air quality (IAQ) monitoring in the field and on the go 
– Includes a stand for attaching to the thread on the back of the device 
– Features an internal memory for storing up to 5000 data sets 
– Saved data is stamped with the time and date 
– Takes measurements even while the battery is charging 
– Integrated data logger with adjustable sampling time: 30 seconds, 1 minute, 2 minutes or 5 minutes 
– Programmable alarm and automatic power-off battery-saving functionality&nbsp;

FLUKE

Extech

ACISION

Center

TRIPLETT

MEGGER

AMPROBE

Fluke Networks

Piecal

Multimeters

Other Measuring Tools

Electrical Power Testing

Clamp Meters

Industrial Thermometer

Humidity & Temperature

Sound & Vibration Meters

Thermal Imaging Cameras

Multimeter Leads

Light Meters & Imaging

CETM

Pce Instruments PCE-MPC 10 Air Quality Particle Counting Meter

pce instruments pce-mpc 10 air quality particle counting meter alat pengukur partikel kualitas udara dari meters instrumen kira zarah kualiti instruments/四氯乙烯仪器 空气质量粒子计数器 空气质量计 四氯乙烯仪器

pce-instruments-pce-mpc-10-air-quality-particle-counting-meter

Please refer to Bekomat 33U CO Brochure in technical data sheets for Technical Performance of Product

Please refer to Bekomat 33U CO Installation manual in technical data sheets on steps to install Bekomat  33U CO Auto Drain Valve & Product's Certificate of Conformity

<h3 class="md-block-header-three">The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product) </h3>During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production. Condensate discharge without compressed air loss The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve. The BEKOMAT® designed for quick and cost-effective servicing The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged. This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate. No loss of compressed air during draining -Low operating costs Outstanding reliability 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 3.No delicate mechanical components 4.Suitable for temperatures up to +70 °C › Easy to install and virtually maintenance-free 1.Versatile connection options 2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work Automated operation and monitoring 1.Ready for integration into modern system monitoring installations 2.Automatic start of self-cleaning process based on dirt particle load 3.Service indicator warns operators in advance when the service unit needs to be replaced For More Information:Please refer to Bekomat 33U CO Brochure in technical data sheets for Technical Performance of ProductPlease refer to Bekomat 33U CO Installation manual in technical data sheets on steps to install Bekomat 33U CO Auto Drain Valve &amp; Product&#x27;s Certificate of Conformity

<h3>The quickest route to efficiency: the BEKOMAT® with service unit (All our Bekomat Drains come with 2 years warranty from date of received photos of correct installation of product)&nbsp;&nbsp;</h3>
During compressed air generation and processing, the optimum quality for the application should be achieved. It is important to remove contaminants and humidity from the compressed air as these can lead to quality problems, failures or loss of production.&nbsp;
<ins>Condensate discharge without compressed air loss</ins> 
The BEKOMAT® drains off condensate without loss of compressed air, thus reducing energy costs and CO2 emissions. This is made possible by the integrated capacitive sensor, smart electronics for volume-controlled condensate discharge and the proven pilot-controlled solenoid valve.&nbsp;
<ins>The BEKOMAT® designed for quick and cost-effective servicing</ins> 
The innovative design of the BEKOMAT® 31U, 32U, 33U and 33U CO models is optimised for easy handling, installation and maintenance. The devices consist of no more than three assemblies joined together with quick-release connectors. Once installed, the control and sensor unit stays in place as only the service unit (including all wear and pressure parts) needs to be exchanged.&nbsp;
This sturdy condensate drain is suitable for both oil-contaminated and oil-free, aggressive condensate.&nbsp;&nbsp;
<ins>No loss of compressed air during draining</ins> 
-Low operating costs&nbsp;
<ins>Outstanding reliability</ins> 
 1.Durable and resistant to dirt 2.Large valve diameters prevent the formation of emulsions › 
3.No delicate mechanical components 
4.Suitable for temperatures up to +70 °C ›&nbsp;
<ins>Easy to install and virtually maintenance-free</ins> 
1.Versatile connection options 
2.Easy exchange of service unit, even where space is confirmed with even in small areas 3.Servicing requires no installation work&nbsp;
<ins>Automated operation and monitoring</ins> 
1.Ready for integration into modern system monitoring installations 
2.Automatic start of self-cleaning process based on dirt particle load 
3.Service indicator warns operators in advance when the service unit needs to be replaced&nbsp;&nbsp;
For More Information:
Please refer to Bekomat 33U CO Brochure in technical data sheets for Technical Performance of Product
Please refer to Bekomat 33U CO Installation manual in technical data sheets on steps to install Bekomat 33U CO Auto Drain Valve &amp; Product's Certificate of Conformity

Bekomat 33U CO Installation Manual

Bekomat 33U CO Brochure

Bekomat 33U CO Auto Drain Valve the Bekomat® Designed for Quick and cost-effective Servicing - hard-coated for oil-free and Aggressive Condensates.

bekomat 33u co auto drain valve bekomat® designed quick cost-effective servicing hard-coated oil-free aggressive condensates. katup pembuangan otomatis dirancang untuk servis yang cepat dan hemat biaya berlapis keras kondensat bebas oli agresif. pneumatic regulators regulator pneumatik beko direka menjimatkan kos dilapisi minyak pengatur beko/贝科 mat 自动排水阀 专为快速且经济高效的维修而设计 硬涂层可用于无油和腐蚀性冷凝液。 气动调节器 贝科