Iwata

Lumberg Automation

Electrical Connectors

electrical-connectors

Circular Connectors

circular-connectors

IT & Electronics

it-electronics

IT Accessories

it-accessories

Electricals

electricals

Mounting Brackets

mounting-brackets

Mechanical Parts

mechanical-parts

Rubber Seals

rubber-seals

Lumberg Automation 934853163 RST 5L-RKT 5L-949/0,3 M M12 Power Double-Ended Cordset: Male Straight to Female Straight, 5-pin(4+FE), L-coded, Blue Body, 50 V AC/60 V Dc, 16 A; Pur Grey Cable, 1.50 Mm²

Ambient Temperature (Operation): -40 °C to +125 °C (notice derating)

Protection Degree / IP Rating: IP65, IP67, IP69K

Pollution Degree: 3 (acc. to DIN EN 60664-1)

Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1

Overvoltage Category: III (acc. to DIN EN 60664-1)

Flammability Class (Contact Bearer): UL 94 V-2

Flammability Class (Molded Body): UL 94 HB

Fastening Torque (Contact Screw): M 12x1: (50-60) Ncm, hand-tight

Minimal Bending Radius (Fixed Installation): ˃ 4 x D

Minimal Bending Radius (Flexible Installation): ˃ 7.5 x D

Ambient Temperature (Fixed Installation): -40 °C to +90 °C (UL AWM 80°C)

Ambient Temperature (Flexible Installation): -30 °C to +90 °C (UL AWM 80°C)

Ambient Temperature (Fixed Installation Short-Term 100h): -40 °C to +125 °C

Ambient Temperature (Drag Chain Installation): -20 °C to +60 °C

Flammability Class (Cable Jacket): VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1

Type of Contact / Gender (Side 2): Female

Insulation Resistance (Side 2): ˃ 10^9 Ohm

Ambient Temperature (Operation, Side 2): -40 °C to +125 °C (notice derating)

Protection Degree / IP Rating (Side 2): IP65, IP67, IP69K

Design Standard (Side 2): IEC 61076-2-111

Pollution Degree (Side 2): 3 (acc. to DIN EN 60664-1)

Clearance / Creepage Distance (Side 2): DIN EN 60664-1 (2008/01); VDE 0110-1

Overvoltage Category (Side 2): III (acc. to DIN EN 60664-1)

Flammability Class (Contact Bearer, Side 2): UL 94 V-2

Flammability Class (Molded Body, Side 2): UL 94 HB

Fastening Torque (Contact Screw, Side 2): M 12x1: (50-60) Ncm, hand-tight

Oil Resistance: HD 22.10 Appendix A, DIN EN 60811-404

Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector

Product Characteristics: Ensure the O-ring’s position before connecting. Improper positioning of the O-ring can lead to ingress protection failure.

<h3 class="md-block-header-three"><strong class="md-inline-bold">Lumberg Automation 934853163 RST 5L-RKT 5L-949/0,3 M M12 Power Double-Ended Cordset: Male Straight to Female Straight, 5-pin(4+FE), L-coded, Blue Body, 50 V AC/60 V Dc, 16 A; Pur Grey Cable, 1.50 Mm²</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Cable length: 0.3m</strong> </p><ul class="md-block-unordered-list-item"><li>Power Connector</li><li>Connector Type: Cordset, double ended</li><li>Shielding: Unshielded</li><li>Rated Voltage: 63 V</li><li>Rated Voltage (UL): 63 V</li><li>Rated Impulse Voltage: 1.5 kV</li><li>Operating Voltage: 50 V AC / 60 V DC</li><li>Rated Current: 16 A</li><li>Rated Current (UL): 16 A</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical Data Side 1</strong></p><ul class="md-block-unordered-list-item"><li>Product Sub Family: M12 Power</li><li>Type of Contact / Gender: Male</li><li>Connector Design: Straight</li><li>Attachment Type: Coupling Screw</li><li>Number of Pins: 5 (4+FE)</li><li>Coding: L</li><li>Contact Resistance: ≤ 10 mOhm</li><li>Insulation Resistance: ˃ 10^9 Ohm</li><li>Mating Cycles: ≤ 100</li><li>Ambient Temperature (Operation): -40 °C to +125 °C (notice derating)</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Design Standard: IEC 61076-2-111</li><li>Pollution Degree: 3 (acc. to DIN EN 60664-1)</li><li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category: III (acc. to DIN EN 60664-1)</li><li>Contact Base Material: CuNi</li><li>Contact Plating: Cu/Au</li><li>Contact Bearer Material: PBT GF</li><li>Contact Bearer Color: Grey</li><li>Flammability Class (Contact Bearer): UL 94 V-2</li><li>Molded Body Material: TPE</li><li>Molded Body Color: Blue</li><li>Flammability Class (Molded Body): UL 94 HB</li><li>Attachment Material: CuZn</li><li>Attachment Plating: Cu/Ni</li><li>O-Ring Material: FKM</li><li>Fastening Torque (Contact Screw): M 12x1: (50-60) Ncm, hand-tight</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Cable Data</strong></p><ul class="md-block-unordered-list-item"><li>Cable Number: 949</li><li>Conductor Size: 1.50 mm²</li><li>Number of Wires: 5</li><li>Minimal Bending Radius (Fixed Installation): ˃ 4 x D</li><li>Minimal Bending Radius (Flexible Installation): ˃ 7.5 x D</li><li>Cycles (Bending): ˃ 10 M</li><li>Conductor Material: Cu</li><li>Cable Jacket Material: PUR</li><li>Cable Jacket Color: Grey (RAL 7032)</li><li>Cable Diameter: ø 8.0 ±0.20 mm</li><li>Wire Insulation Material: PP</li><li>Insulated Wire Diameter: ø 2.35 mm</li><li>Ambient Temperature (Fixed Installation): -40 °C to +90 °C (UL AWM 80°C)</li><li>Ambient Temperature (Flexible Installation): -30 °C to +90 °C (UL AWM 80°C)</li><li>Ambient Temperature (Fixed Installation Short-Term 100h): -40 °C to +125 °C</li><li>Ambient Temperature (Drag Chain Installation): -20 °C to +60 °C</li><li>UL Cable Type: AWM: 20939</li><li>Flammability Class (Cable Jacket): VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical Data Side 2</strong></p><ul class="md-block-unordered-list-item"><li>Product Sub Family (Side 2): M12 Power</li><li>Type of Contact / Gender (Side 2): Female</li><li>Connector Design (Side 2): Straight</li><li>Attachment Type (Side 2): Coupling Nut</li><li>Number of Pins (Side 2): 5 (4+FE)</li><li>Coding (Side 2): L</li><li>Contact Resistance (Side 2): ≤ 10 mOhm</li><li>Insulation Resistance (Side 2): ˃ 10^9 Ohm</li><li>Mating Cycles (Side 2): ≤ 100</li><li>Ambient Temperature (Operation, Side 2): -40 °C to +125 °C (notice derating)</li><li>Protection Degree / IP Rating (Side 2): IP65, IP67, IP69K</li><li>Design Standard (Side 2): IEC 61076-2-111</li><li>Pollution Degree (Side 2): 3 (acc. to DIN EN 60664-1)</li><li>Clearance / Creepage Distance (Side 2): DIN EN 60664-1 (2008/01); VDE 0110-1</li><li>Overvoltage Category (Side 2): III (acc. to DIN EN 60664-1)</li><li>Contact Base Material (Side 2): CuNi</li><li>Contact Plating (Side 2): Cu/Au</li><li>Contact Bearer Material (Side 2): PBT GF</li><li>Contact Bearer Color (Side 2): Grey</li><li>Flammability Class (Contact Bearer, Side 2): UL 94 V-2</li><li>Molded Body Material (Side 2): TPE</li><li>Molded Body Color (Side 2): Blue</li><li>Flammability Class (Molded Body, Side 2): UL 94 HB</li><li>Attachment Material (Side 2): CuZn</li><li>Attachment Plating (Side 2): Cu/Ni</li><li>O-Ring Material (Side 2): FKM</li><li>Fastening Torque (Contact Screw, Side 2): M 12x1: (50-60) Ncm, hand-tight</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Approvals</strong></p><ul class="md-block-unordered-list-item"><li>UL File: E497237</li><li>UL: UL 2237; cULus</li><li>VDE: VDE 61984</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Safety &amp; Environmental Compliance</strong></p><ul class="md-block-unordered-list-item"><li>RoHS Compliant: Yes</li><li>Halogen-Free: DIN VDE 0472 T.815</li><li>Oil Resistance: HD 22.10 Appendix A, DIN EN 60811-404</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Notes</strong></p><ul class="md-block-unordered-list-item"><li>Derating Notice: Notice derating</li><li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector</li><li>Product Characteristics: Ensure the O-ring’s position before connecting. Improper positioning of the O-ring can lead to ingress protection failure.</li></ul>

<h3><strong>Lumberg Automation 934853163 RST 5L-RKT 5L-949/0,3 M M12 Power Double-Ended Cordset: Male Straight to Female Straight, 5-pin(4+FE), L-coded, Blue Body, 50 V AC/60 V Dc, 16 A; Pur Grey Cable, 1.50 Mm²</strong></h3>
<p><strong>Cable length: 0.3m</strong>&nbsp;</p>
<ul>
<li>Power Connector</li>
<li>Connector Type: Cordset, double ended</li>
<li>Shielding: Unshielded</li>
<li>Rated Voltage: 63 V</li>
<li>Rated Voltage (UL): 63 V</li>
<li>Rated Impulse Voltage: 1.5 kV</li>
<li>Operating Voltage: 50 V AC / 60 V DC</li>
<li>Rated Current: 16 A</li>
<li>Rated Current (UL): 16 A</li>
</ul>
<p><strong>Technical Data Side 1</strong></p>
<ul>
<li>Product Sub Family: M12 Power</li>
<li>Type of Contact / Gender: Male</li>
<li>Connector Design: Straight</li>
<li>Attachment Type: Coupling Screw</li>
<li>Number of Pins: 5 (4+FE)</li>
<li>Coding: L</li>
<li>Contact Resistance: ≤ 10 mOhm</li>
<li>Insulation Resistance: ˃ 10^9 Ohm</li>
<li>Mating Cycles: ≤ 100</li>
<li>Ambient Temperature (Operation): -40 °C to +125 °C (notice derating)</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Design Standard: IEC 61076-2-111</li>
<li>Pollution Degree: 3 (acc. to DIN EN 60664-1)</li>
<li>Clearance / Creepage Distance: DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category: III (acc. to DIN EN 60664-1)</li>
<li>Contact Base Material: CuNi</li>
<li>Contact Plating: Cu/Au</li>
<li>Contact Bearer Material: PBT GF</li>
<li>Contact Bearer Color: Grey</li>
<li>Flammability Class (Contact Bearer): UL 94 V-2</li>
<li>Molded Body Material: TPE</li>
<li>Molded Body Color: Blue</li>
<li>Flammability Class (Molded Body): UL 94 HB</li>
<li>Attachment Material: CuZn</li>
<li>Attachment Plating: Cu/Ni</li>
<li>O-Ring Material: FKM</li>
<li>Fastening Torque (Contact Screw): M 12x1: (50-60) Ncm, hand-tight</li>
</ul>
<p><strong>Cable Data</strong></p>
<ul>
<li>Cable Number: 949</li>
<li>Conductor Size: 1.50 mm²</li>
<li>Number of Wires: 5</li>
<li>Minimal Bending Radius (Fixed Installation): ˃ 4 x D</li>
<li>Minimal Bending Radius (Flexible Installation): ˃ 7.5 x D</li>
<li>Cycles (Bending): ˃ 10 M</li>
<li>Conductor Material: Cu</li>
<li>Cable Jacket Material: PUR</li>
<li>Cable Jacket Color: Grey (RAL 7032)</li>
<li>Cable Diameter: ø 8.0 ±0.20 mm</li>
<li>Wire Insulation Material: PP</li>
<li>Insulated Wire Diameter: ø 2.35 mm</li>
<li>Ambient Temperature (Fixed Installation): -40 °C to +90 °C (UL AWM 80°C)</li>
<li>Ambient Temperature (Flexible Installation): -30 °C to +90 °C (UL AWM 80°C)</li>
<li>Ambient Temperature (Fixed Installation Short-Term 100h): -40 °C to +125 °C</li>
<li>Ambient Temperature (Drag Chain Installation): -20 °C to +60 °C</li>
<li>UL Cable Type: AWM: 20939</li>
<li>Flammability Class (Cable Jacket): VDE 0482-332-1-2, DIN EN 60332-1-2 / IEC 60332-1 / UL VW-1, CSA FT1</li>
</ul>
<p><strong>Technical Data Side 2</strong></p>
<ul>
<li>Product Sub Family (Side 2): M12 Power</li>
<li>Type of Contact / Gender (Side 2): Female</li>
<li>Connector Design (Side 2): Straight</li>
<li>Attachment Type (Side 2): Coupling Nut</li>
<li>Number of Pins (Side 2): 5 (4+FE)</li>
<li>Coding (Side 2): L</li>
<li>Contact Resistance (Side 2): ≤ 10 mOhm</li>
<li>Insulation Resistance (Side 2): ˃ 10^9 Ohm</li>
<li>Mating Cycles (Side 2): ≤ 100</li>
<li>Ambient Temperature (Operation, Side 2): -40 °C to +125 °C (notice derating)</li>
<li>Protection Degree / IP Rating (Side 2): IP65, IP67, IP69K</li>
<li>Design Standard (Side 2): IEC 61076-2-111</li>
<li>Pollution Degree (Side 2): 3 (acc. to DIN EN 60664-1)</li>
<li>Clearance / Creepage Distance (Side 2): DIN EN 60664-1 (2008/01); VDE 0110-1</li>
<li>Overvoltage Category (Side 2): III (acc. to DIN EN 60664-1)</li>
<li>Contact Base Material (Side 2): CuNi</li>
<li>Contact Plating (Side 2): Cu/Au</li>
<li>Contact Bearer Material (Side 2): PBT GF</li>
<li>Contact Bearer Color (Side 2): Grey</li>
<li>Flammability Class (Contact Bearer, Side 2): UL 94 V-2</li>
<li>Molded Body Material (Side 2): TPE</li>
<li>Molded Body Color (Side 2): Blue</li>
<li>Flammability Class (Molded Body, Side 2): UL 94 HB</li>
<li>Attachment Material (Side 2): CuZn</li>
<li>Attachment Plating (Side 2): Cu/Ni</li>
<li>O-Ring Material (Side 2): FKM</li>
<li>Fastening Torque (Contact Screw, Side 2): M 12x1: (50-60) Ncm, hand-tight</li>
</ul>
<p><strong>Approvals</strong></p>
<ul>
<li>UL File: E497237</li>
<li>UL: UL 2237; cULus</li>
<li>VDE: VDE 61984</li>
</ul>
<p><strong>Safety &amp; Environmental Compliance</strong></p>
<ul>
<li>RoHS Compliant: Yes</li>
<li>Halogen-Free: DIN VDE 0472 T.815</li>
<li>Oil Resistance: HD 22.10 Appendix A, DIN EN 60811-404</li>
</ul>
<p><strong>Notes</strong></p>
<ul>
<li>Derating Notice: Notice derating</li>
<li>Protection Degree / IP Rating Note: Only if mounted and locked in combination with Hirschmann / Lumberg Automation connector</li>
<li>Product Characteristics: Ensure the O-ring’s position before connecting. Improper positioning of the O-ring can lead to ingress protection failure.</li>
</ul>


Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

lumberg automation 934853163 rst 5l-rkt 5l-949/0,3 m12 power double-ended cordset: male straight female straight, 5-pin(4+fe), l-coded, blue body, 50 ac/60 dc, 16 a; pur grey cable, 1.50 mm² kabel daya ujung ganda m12: ke 5-pin (4+fe), berkode l, bodi biru, abu-abu pur, 1,50 circular connectors automasi kuasa cordset dua hujung: lurus lelaki kepada perempuan, berkod badan grey, lumberg/隆堡 电源双端线组：公头直型至母头直型，5 针（4+fe），l 编码，蓝色主体，50 dc，16 a；纯灰色电缆，1.50 隆堡自动化

lumberg-automation-934853163-rst-5l-rkt-5l-949-0-3-m-m12-power-double-ended-cordset-male-straight-to-female-straight-5-pin-4-fe-l-coded-blue-body-50-v-ac-60-v-dc-16-a-pur-grey-cable-1-50-mm

Iwata 100 Series Black Edge Trim for 4.8mm Plate Thickness 5 Pattern 15m

Edge Trims For Plate Thickness 4.8 mm can be used for plates with thickness ranging from 3.2 to a maximum of 5 mm. Edge Trims For Plate Thickness 4.8 mm are great for metal sheets like wire slots that may be dangerous should the edges not be protected properly.

Easy installation without using an adhesive to protect the edges

Aluminium mandrel provides high grip, light weight and excellent corrosion resistance

TPE is friendly material to excellent environment to recycling

Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)

<h3 class="md-block-header-three">Iwata 100 Series Black Edge Trim for 4.8mm Plate Thickness 5 Pattern 15m</h3><p class="md-block-unstyled">Edge Trims For Plate Thickness 4.8 mm can be used for plates with thickness ranging from 3.2 to a maximum of 5 mm. Edge Trims For Plate Thickness 4.8 mm are great for metal sheets like wire slots that may be dangerous should the edges not be protected properly.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trimming for plate thickness of 4.8 mm</li><li>Easy installation without using an adhesive to protect the edges</li><li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li><li>TPE is friendly material to excellent environment to recycling</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Edge Trim</li><li>Basic Plate Thickness: 4.8 mm</li><li>Corresponding Plate Thickness: 4 to 5 mm</li><li>Series: 100</li><li>Colour: Black</li><li>Pattern: 5</li><li>Length: 15 m</li><li>Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)</li></ul><h3 class="md-block-header-three">Available Material:</h3><ul class="md-block-unordered-list-item"><li>SKU: 100-48-B-5 - PVC</li><li>SKU: 100-48-B-5T - TPE</li></ul>

<h3>Iwata 100 Series Black Edge Trim for 4.8mm Plate Thickness 5 Pattern 15m</h3>
<p>Edge Trims For Plate Thickness 4.8 mm can be used for plates with thickness ranging from 3.2 to a maximum of 5 mm. Edge Trims For Plate Thickness 4.8 mm are great for metal sheets like wire slots that may be dangerous should the edges not be protected properly.</p>
<h3>Features:</h3>
<ul>
<li>Trimming for plate thickness of 4.8 mm</li>
<li>Easy installation without using an adhesive to protect the edges</li>
<li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li>
<li>TPE is friendly material to excellent environment to recycling</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Edge Trim</li>
<li>Basic Plate Thickness: 4.8 mm</li>
<li>Corresponding Plate Thickness: 4 to 5 mm</li>
<li>Series: 100</li>
<li>Colour: Black</li>
<li>Pattern: 5</li>
<li>Length: 15 m</li>
<li>Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)</li>
</ul>
<h3>Available Material:</h3>
<ul>
<li>SKU: 100-48-B-5 - PVC</li>
<li>SKU: 100-48-B-5T - TPE</li>
</ul>


Hooks & Eyes

Machinery Accessories

Leland Tan

buyerIntroduction

iwata 100 series black edge trim 4.8mm plate thickness pattern 15m untuk tebal plat pola rubber seals segel karet ketebalan corak pengedap getah iwata/岩田 100系列4.8mm板厚的黑色边缘饰板5图案15m 岩田

iwata-100-series-black-edge-trim-for-4-8mm-plate-thickness-5-pattern-15m

100-48-B-5 - PVC

100-48-B-5T - TPE

Material

Iwata 100 Series Black Edge Trim for 3.2mm Plate Thickness 3 Pattern 15m

Edge Trims For Plate Thickness 3.2 mm can be used for plates with thickness ranging from 1.6 to a maximum of 4 mm. Edge Trims For Plate Thickness 3.2 mm are great for metal sheets like exhaust panels that may be dangerous should the edges not be protected properly.

Corresponding Plate Thickness: 2.4 to 4 mm

<h3 class="md-block-header-three">Iwata 100 Series Black Edge Trim for 3.2mm Plate Thickness 3 Pattern 15m</h3><p class="md-block-unstyled">Edge Trims For Plate Thickness 3.2 mm can be used for plates with thickness ranging from 1.6 to a maximum of 4 mm. Edge Trims For Plate Thickness 3.2 mm are great for metal sheets like exhaust panels that may be dangerous should the edges not be protected properly.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trimming for plate thickness of 3.2 mm</li><li>Easy installation without using an adhesive to protect the edges</li><li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li><li>TPE is friendly material to excellent environment to recycling</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Edge Trim</li><li>Basic Plate Thickness: 3.2 mm</li><li>Corresponding Plate Thickness: 2.4 to 4 mm</li><li>Series: 100</li><li>Colour: Black</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)</li></ul><h3 class="md-block-header-three">Available Material:</h3><ul class="md-block-unordered-list-item"><li>SKU: 100-32-B-3 - PVC</li><li>SKU: 100-32-B-3T - TPE</li></ul>

<h3>Iwata 100 Series Black Edge Trim for 3.2mm Plate Thickness 3 Pattern 15m</h3>
<p>Edge Trims For Plate Thickness 3.2 mm can be used for plates with thickness ranging from 1.6 to a maximum of 4 mm. Edge Trims For Plate Thickness 3.2 mm are great for metal sheets like exhaust panels that may be dangerous should the edges not be protected properly.</p>
<h3>Features:</h3>
<ul>
<li>Trimming for plate thickness of 3.2 mm</li>
<li>Easy installation without using an adhesive to protect the edges</li>
<li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li>
<li>TPE is friendly material to excellent environment to recycling</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Edge Trim</li>
<li>Basic Plate Thickness: 3.2 mm</li>
<li>Corresponding Plate Thickness: 2.4 to 4 mm</li>
<li>Series: 100</li>
<li>Colour: Black</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)</li>
</ul>
<h3>Available Material:</h3>
<ul>
<li>SKU: 100-32-B-3 - PVC</li>
<li>SKU: 100-32-B-3T - TPE</li>
</ul>


iwata 100 series black edge trim 3.2mm plate thickness pattern 15m untuk tebal plat pola rubber seals segel karet tepi hitam ketebalan corak pengedap getah iwata/岩田 100系列黑色边缘饰边，用于3.2mm板厚3图案15m 岩田

iwata-100-series-black-edge-trim-for-3-2mm-plate-thickness-3-pattern-15m

100-32-B-3 - PVC

100-32-B-3T - TPE

Iwata 750 Series Black Edge Trim for 2.4mm Plate Thickness 2 Pattern 75m S750-24-B-2

Edge Trims For Plate Thickness 2.4 mm can be used for plates with thickness ranging from 2 to a maximum of 3 mm. Trims in 75 series are able to protect plates that are more than 2.4 mm thick. Edge Trims For Plate Thickness 2.4 mm are great for thin metal sheets like trolley tables, that may be dangerous should the edges not be protected properly.

Easy installation by simply pushing in without using an adhesive to protect the edge part

Corresponding Plate Thickness: 0.8 to 2.4 mm

<h3 class="md-block-header-three">Iwata 750 Series Black Edge Trim for 2.4mm Plate Thickness 2 Pattern 75m S750-24-B-2</h3><p class="md-block-unstyled">Edge Trims For Plate Thickness 2.4 mm can be used for plates with thickness ranging from 2 to a maximum of 3 mm. Trims in 75 series are able to protect plates that are more than 2.4 mm thick. Edge Trims For Plate Thickness 2.4 mm are great for thin metal sheets like trolley tables, that may be dangerous should the edges not be protected properly.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trimming for thickness of 2.4 mm</li><li>Easy installation by simply pushing in without using an adhesive to protect the edge part</li><li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Edge Trim</li><li>Basic Plate Thickness: 2.4 mm</li><li>Corresponding Plate Thickness: 0.8 to 2.4 mm</li><li>Series: 750</li><li>Colour: Black</li><li>Pattern: 2</li><li>Length: 75 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Material: PVC</li></ul>

<h3>Iwata 750 Series Black Edge Trim for 2.4mm Plate Thickness 2 Pattern 75m S750-24-B-2</h3>
<p>Edge Trims For Plate Thickness 2.4 mm can be used for plates with thickness ranging from 2 to a maximum of 3 mm. Trims in 75 series are able to protect plates that are more than 2.4 mm thick. Edge Trims For Plate Thickness 2.4 mm are great for thin metal sheets like trolley tables, that may be dangerous should the edges not be protected properly.</p>
<h3>Features:</h3>
<ul>
<li>Trimming for thickness of 2.4 mm</li>
<li>Easy installation by simply pushing in without using an adhesive to protect the edge part</li>
<li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Edge Trim</li>
<li>Basic Plate Thickness: 2.4 mm</li>
<li>Corresponding Plate Thickness: 0.8 to 2.4 mm</li>
<li>Series: 750</li>
<li>Colour: Black</li>
<li>Pattern: 2</li>
<li>Length: 75 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Material: PVC</li>
</ul>


iwata 750 series black edge trim 2.4mm plate thickness pattern 75m s750-24-b-2 untuk tebal ketebalan pola rubber seals segel karet plat corak pengedap getah iwata/岩田 750系列黑色边缘饰板，用于2.4mm板厚2图案75m 岩田

iwata-750-series-black-edge-trim-for-2-4mm-plate-thickness-2-pattern-75m-s750-24-b-2

Iwata Offset Type 1 Single Unit Pressure Gauge Bracket PDD1-01S

Digital pressure gauge, mounting bracket corresponding to the ISE30/ZSE30 convenient is to such as attachment to the aluminium frame for offset type can be installed well look to the device one-pressure gauge. Excellent in corrosion resistance and material Stainless steel SUS304 and optional nut plate make installation easier.

<h3 class="md-block-header-three">Iwata Offset Type 1 Single Unit Pressure Gauge Bracket PDD1-01S</h3><p class="md-block-unstyled">Digital pressure gauge, mounting bracket corresponding to the ISE30/ZSE30 convenient is to such as attachment to the aluminium frame for offset type can be installed well look to the device one-pressure gauge. Excellent in corrosion resistance and material Stainless steel SUS304 and optional nut plate make installation easier.</p><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Pressure Gauge Bracket</li><li>Pressure Gauge Type: Digital</li><li>Fit for Models: ISE30, ZSE30</li><li>Material: Stainless Steel</li><li>Material Grade: SUS304</li><li>Thickness: 1.5 mm</li><li>Number of Station: Single</li><li>Bracket Type: Offset 1 </li><li>W: 50 mm</li><li>H: 90 mm</li><li>L: 30 mm</li><li>E: 64 mm</li><li>P1: 40 mm</li><li>P2: 80 mm</li><li>W2: 40 mm</li><li>H2: 55 mm</li></ul>

<h3>Iwata Offset Type 1 Single Unit Pressure Gauge Bracket PDD1-01S</h3>
<p>Digital pressure gauge, mounting bracket corresponding to the ISE30/ZSE30 convenient is to such as attachment to the aluminium frame for offset type can be installed well look to the device one-pressure gauge. Excellent in corrosion resistance and material Stainless steel SUS304 and optional nut plate make installation easier.</p>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Pressure Gauge Bracket</li>
<li>Pressure Gauge Type: Digital</li>
<li>Fit for Models: ISE30, ZSE30</li>
<li>Material: Stainless Steel</li>
<li>Material Grade: SUS304</li>
<li>Thickness: 1.5 mm</li>
<li>Number of Station: Single</li>
<li>Bracket Type: Offset 1&nbsp;</li>
<li>W: 50 mm</li>
<li>H: 90 mm</li>
<li>L: 30 mm</li>
<li>E: 64 mm</li>
<li>P1: 40 mm</li>
<li>P2: 80 mm</li>
<li>W2: 40 mm</li>
<li>H2: 55 mm</li>
</ul>


iwata offset type single unit pressure gauge bracket pdd1-01s tipe braket pengukur tekanan mounting brackets pemasangan pendakap iwata/岩田 偏置1型单体压力表支架pdd1-01s 安装支架 岩田

iwata-offset-type-1-single-unit-pressure-gauge-bracket-pdd1-01s

Bracket for mounting proximity sensor (screw type)

The space-saving design makes it possible to install proximity sensors that are compact and attractive

Surface Treatment: Cationic Electrodeposition Coating

<h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Bracket for mounting proximity sensor (screw type)</li><li>The space-saving design makes it possible to install proximity sensors that are compact and attractive</li><li>L-shape</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: L Sliding Sensor Bracket</li><li>Material: Iron SPCC</li><li>Surface Treatment: Cationic Electrodeposition Coating</li><li>Colour: Black</li><li>Corresponding Sensor Size: M8</li><li>t: 2.3 mm</li><li>Reference Dimension (A): 30 mm</li><li>L: 39 mm</li><li>Weight: 19 g</li></ul>

<h3>Features:</h3>
<ul>
<li>Bracket for mounting proximity sensor (screw type)</li>
<li>The space-saving design makes it possible to install proximity sensors that are compact and attractive</li>
<li>L-shape</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: L Sliding Sensor Bracket</li>
<li>Material: Iron SPCC</li>
<li>Surface Treatment: Cationic Electrodeposition Coating</li>
<li>Colour: Black</li>
<li>Corresponding Sensor Size: M8</li>
<li>t: 2.3 mm</li>
<li>Reference Dimension (A): 30 mm</li>
<li>L: 39 mm</li>
<li>Weight: 19 g</li>
</ul>


Iwata L Type Miniature Bracket for M8 Proximity Sensor 39mm FS08LC030-Z

iwata l type miniature bracket m8 proximity sensor 39mm fs08lc030-z untuk accessories aksesoris kurung miniatur jenis aksesori iwata/岩田 l型微型支架，用于m8近程传感器39mm it配件 岩田