DeFelsko

Digi-Pas

FLUKE

HIOKI

Kaiterra

Multi

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Electrical Power Testing

electrical-power-testing

Level Measurement

level-measurement

Services

services

Traceable Calibration Services

traceable-calibration-services

Ultrasonic Thickness Gauges

ultrasonic-thickness-gauges

Matthew Lee

buyerIntroduction

Cetm 120 Traceable Calibration for Multi m140CE Ac Leakage Clamp

cetm 120 traceable calibration multi m140ce ac leakage clamp kalibrasi terlacak untuk penjepit kebocoran services penentukuran boleh kesan pengapit 可追溯校准，适用于 multi/多 交流漏电流钳

cetm-120-traceable-calibration-for-multi-m140ce-ac-leakage-clamp

Digi-Pas DWL-1300XY is a Bluetooth, Dual-Axis Precision Digital machine level of 0.01° resolution. This 2-axis Digital Level replaces old-fashioned spirit levels. Users  effectively cut down installation & setup time for precision machines & equipment. Digi-Pas Precision Digital Level is highly accurate and verified by 3rd parties accredited calibration labs & test bodies in US, Japan & Germany.


Measuring range: 1.0” or 0.00° ~ ±5.00° dual-axis

Resolution: 0.002”/ft or 40-second (0.18 mm/M or 0.01°)

Accuracy: ±0.004”/ft or 80-second (± 0.02°) from 0° to ±0.5° and 0.04° at other angles

User may use device with/without Bluetooth

Operating temperature at 10°F to 120°F. or -10°C to +50°C

Digi-Pas digital level gauges is verified by accredited 3rd Party Calibration & Test Laboratories in USA, Japan and Germany traceable to NIST, JIS & DIN. 

Digi-Pas® DWL-1300XY are used for installation, setup, maintenance of milling & surface grinding CNC machines. It is able to accurately level jig & fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.

The simultaneous display for dual-axis feature of Digi-Pas® DWL-1300XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise leveling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.

Digi-Pas® DWL-1300XY 2-Axis model is used for Vision Measurement Equipment installation & setup. Levelling & checking equipment's positional Stability for high quality sharp image capturing & measurement.

Digi-Pas® DWL-1300XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.

Digi-Pas® DWL-1300XY dual axis model is used for monitoring a precision wafer manufacturing equipment's performance.

Digi-Pas® DWL-1300XY is used in railway maintenance & operation to detect rail tracks deformation and elevation variations. It is a useful tool in aids for rail lines realignment, repair and construction of a new rail line. Accurate rail tracks longitudinal profile levelling and transversal alignment lead to enhanced safety standard for high speed railway operation.

Digi-Pas DWL-1300XY is a Bluetooth, Dual-Axis Precision Digital machine level of 0.01° resolution. This 2-axis Digital Level replaces old-fashioned spirit levels. Users  effectively cut down installation &amp; setup time for precision machines &amp; equipment. Digi-Pas Precision Digital Level is highly accurate and verified by 3rd parties accredited calibration labs &amp; test bodies in US, Japan &amp; Germany. <h3 class="md-block-header-three">Product Specification</h3><ul class="md-block-unordered-list-item"><li>Measuring range: 1.0” or 0.00° ~ ±5.00° dual-axis</li><li>Resolution: 0.002”/ft or 40-second (0.18 mm/M or 0.01°)</li><li>Accuracy: ±0.004”/ft or 80-second (± 0.02°) from 0° to ±0.5° and 0.04° at other angles</li><li>User may use device with/without Bluetooth</li><li>Bluetooth range: approx. 50ft (15m)</li><li>Operating temperature at 10°F to 120°F. or -10°C to +50°C</li><li>Digi-Pas digital level gauges is verified by accredited 3rd Party Calibration &amp; Test Laboratories in USA, Japan and Germany traceable to NIST, JIS &amp; DIN. </li></ul>Digi-Pas® DWL-1300XY are used for installation, setup, maintenance of milling &amp; surface grinding CNC machines. It is able to accurately level jig &amp; fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.The simultaneous display for dual-axis feature of Digi-Pas® DWL-1300XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise leveling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.Digi-Pas® DWL-1300XY 2-Axis model is used for Vision Measurement Equipment installation &amp; setup. Levelling &amp; checking equipment&#x27;s positional Stability for high quality sharp image capturing &amp; measurement.Digi-Pas® DWL-1300XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.Digi-Pas® DWL-1300XY dual axis model is used for monitoring a precision wafer manufacturing equipment&#x27;s performance.Digi-Pas® DWL-1300XY is used in railway maintenance &amp; operation to detect rail tracks deformation and elevation variations. It is a useful tool in aids for rail lines realignment, repair and construction of a new rail line. Accurate rail tracks longitudinal profile levelling and transversal alignment lead to enhanced safety standard for high speed railway operation.

Digi-Pas DWL-1300XY is a Bluetooth, Dual-Axis Precision Digital machine level of 0.01° resolution. This 2-axis Digital Level replaces old-fashioned spirit levels. Users  effectively cut down installation &amp; setup time for precision machines &amp; equipment. Digi-Pas Precision Digital Level is highly accurate and verified by 3rd parties accredited calibration labs &amp; test bodies in US, Japan &amp; Germany. 

<h3>Product Specification</h3>
<ul>
<li>Measuring range: 1.0” or 0.00° ~ ±5.00° dual-axis</li>
<li>Resolution: 0.002”/ft or 40-second (0.18 mm/M or 0.01°)</li>
<li>Accuracy: ±0.004”/ft or 80-second (± 0.02°) from 0° to ±0.5° and 0.04° at other angles</li>
<li>User may use device with/without Bluetooth</li>
<li>Bluetooth range: approx. 50ft (15m)</li>
<li>Operating temperature at 10°F to 120°F. or -10°C to +50°C</li>
<li>Digi-Pas digital level gauges is verified by accredited 3rd Party Calibration &amp; Test Laboratories in USA, Japan and Germany traceable to NIST, JIS &amp; DIN. </li>
</ul>
Digi-Pas® DWL-1300XY are used for installation, setup, maintenance of milling &amp; surface grinding CNC machines. It is able to accurately level jig &amp; fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.
The simultaneous display for dual-axis feature of Digi-Pas® DWL-1300XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise leveling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.
Digi-Pas® DWL-1300XY 2-Axis model is used for Vision Measurement Equipment installation &amp; setup. Levelling &amp; checking equipment's positional Stability for high quality sharp image capturing &amp; measurement.
Digi-Pas® DWL-1300XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.
Digi-Pas® DWL-1300XY dual axis model is used for monitoring a precision wafer manufacturing equipment's performance.
Digi-Pas® DWL-1300XY is used in railway maintenance &amp; operation to detect rail tracks deformation and elevation variations. It is a useful tool in aids for rail lines realignment, repair and construction of a new rail line. Accurate rail tracks longitudinal profile levelling and transversal alignment lead to enhanced safety standard for high speed railway operation.

Kho Zhi Gang

MILWAUKEE TOOL

Vogel

heytec

AUTOSOL

Heyco

WD40

Gorilla

RIDGID TOOLS

Other Measuring Tools

Polishing Liquids

Drills, Impact Drivers & Wrenches

Power Saws

Distance Measurement

Socket Sets

Toolboxes

Led Lights

Toolbags

KHO ZHI GANG

Digipas Machinist Digital Level Dwl 1300

digipas machinist digital level dwl 1300 measurement pengukuran digi-pas pengukur aras 机械师数字水准仪

digipas-machinist-digital-level-dwl-1300

Digi-Pas DWL-1500XY is a Dual-Axis (2 Axis) Precision Digital Level.

It allows for quick and precise alignment during the set up of machines or for checking that worktops are perpendicular to machine tools like drills. The Digi-pas app also reduces manpower and time taken to verify readings as data can be monitored remotely.

Resolution : 0.001°  (Accuracy: ±0.0004”/ft or 10-second (± 0.002°) from 0° to ±0.5° ± 0.004° at other angles)

DWL-1500XY replaces old-fashioned VIAL levels. Users read both X & Y axis levelling measurements wirelessly in proximity via Bluetooth, which effectively cuts down installation & setup time. One-man operation is now possible for precision machines & equipment.

With "DigiPas Machinist Level" Mobile App (Free one redeemable app with each purchase),

Use 2 Devices with the App for Precise Alignment

Multiple devices can also be monitored at the same time using the app, ensuring you have the best alignment.

Digi-Pas Precision Digital Level is highly accurate, verified by 3rd parties accredited calibration labs & test bodies in US, Japan & Germany in accordance with ISO/IEC 17025:2005 and ANSI/NCSL Z540-1 standard, traceable to NIST, JIS & DIN.

Measuring range: 0.000° ~ ±2.000° dual-axis

Resolution: 0.0002”/ft or 5-second (0.020 mm/M or 0.001°)

Accuracy: ±0.0004”/ft or 10-second (± 0.002°) from 0° to ±0.5° ± 0.004° at other angles

User may use device without or with Bluetooth® Measurement when paired with smartphone & Digi-Pas Machinist level App

Operating temperature range: 10°F to 120°F or -10°C to +50°C

ACCURACY of Digi-Pas digital level is verified by accredited 3rd Party Calibration & Test Laboratories in USA, Japan and Germany traceable to NIST, JIS & DIN.

 Digi-Pas® DWL-1500XY are used for installation, setup, maintenance of milling & surface grinding CNC machines. It is able to accurately level jig & fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.

The simultaneous display for dual-axis feature of Digi-Pas® DWL-1500XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise levelling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.

Digi-Pas DWL-1500XY 2-Axis model is used for Vision Measurement Equipment installation & setup. Levelling & checking equipment's positional Stability for high quality sharp image capturing & measurement.

Digi-Pas DWL-1500XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.

Digi-Pas DWL-1500XY dual axis model is used for monitoring a precision wafer manufacturing equipment's performance.

<h3 class="md-block-header-three">Digi-Pas DWL-1500XY is a Dual-Axis (2 Axis) Precision Digital Level.</h3>It allows for quick and precise alignment during the set up of machines or for checking that worktops are perpendicular to machine tools like drills. The Digi-pas app also reduces manpower and time taken to verify readings as data can be monitored remotely.Resolution : 0.001° (Accuracy: ±0.0004”/ft or 10-second (± 0.002°) from 0° to ±0.5° ± 0.004° at other angles)<h3 class="md-block-header-three">Replaces Traditional Spirit Levels</h3>DWL-1500XY replaces old-fashioned VIAL levels. Users read both X &amp; Y axis levelling measurements wirelessly in proximity via Bluetooth, which effectively cuts down installation &amp; setup time. One-man operation is now possible for precision machines &amp; equipment.With &quot;DigiPas Machinist Level&quot; Mobile App (Free one redeemable app with each purchase),<h3 class="md-block-header-three">Use 2 Devices with the App for Precise Alignment</h3>Multiple devices can also be monitored at the same time using the app, ensuring you have the best alignment.Digi-Pas Precision Digital Level is highly accurate, verified by 3rd parties accredited calibration labs &amp; test bodies in US, Japan &amp; Germany in accordance with ISO/IEC 17025:2005 and ANSI/NCSL Z540-1 standard, traceable to NIST, JIS &amp; DIN.<h3 class="md-block-header-three">Specifications</h3><ul class="md-block-unordered-list-item"><li>Measuring range: 0.000° ~ ±2.000° dual-axis</li><li>Resolution: 0.0002”/ft or 5-second (0.020 mm/M or 0.001°)</li><li>Accuracy: ±0.0004”/ft or 10-second (± 0.002°) from 0° to ±0.5° ± 0.004° at other angles</li><li>User may use device without or with Bluetooth® Measurement when paired with smartphone &amp; Digi-Pas Machinist level App</li><li>Bluetooth range: approx. 50ft.</li><li>Operating temperature range: 10°F to 120°F or -10°C to +50°C</li><li>ACCURACY of Digi-Pas digital level is verified by accredited 3rd Party Calibration &amp; Test Laboratories in USA, Japan and Germany traceable to NIST, JIS &amp; DIN.</li></ul><h3 class="md-block-header-three">Application Examples</h3> Digi-Pas® DWL-1500XY are used for installation, setup, maintenance of milling &amp; surface grinding CNC machines. It is able to accurately level jig &amp; fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.The simultaneous display for dual-axis feature of Digi-Pas® DWL-1500XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise levelling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.Digi-Pas DWL-1500XY 2-Axis model is used for Vision Measurement Equipment installation &amp; setup. Levelling &amp; checking equipment&#x27;s positional Stability for high quality sharp image capturing &amp; measurement.Digi-Pas DWL-1500XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.Digi-Pas DWL-1500XY dual axis model is used for monitoring a precision wafer manufacturing equipment&#x27;s performance.

<h3>Digi-Pas DWL-1500XY is a Dual-Axis (2 Axis) Precision Digital Level.</h3>
It allows for quick and precise alignment during the set up of machines or for checking that worktops are perpendicular to machine tools like drills. The Digi-pas app also reduces manpower and time taken to verify readings as data can be monitored remotely.
Resolution : 0.001° (Accuracy: ±0.0004”/ft or 10-second (± 0.002°) from 0° to ±0.5° ± 0.004° at other angles)
<h3>Replaces Traditional Spirit Levels</h3>
DWL-1500XY replaces old-fashioned VIAL levels. Users read both X &amp; Y axis levelling measurements wirelessly in proximity via Bluetooth, which effectively cuts down installation &amp; setup time. One-man operation is now possible for precision machines &amp; equipment.
With "DigiPas Machinist Level" Mobile App (Free one redeemable app with each purchase),
<h3>Use 2 Devices with the App for Precise Alignment</h3>
Multiple devices can also be monitored at the same time using the app, ensuring you have the best alignment.
Digi-Pas Precision Digital Level is highly accurate, verified by 3rd parties accredited calibration labs &amp; test bodies in US, Japan &amp; Germany in accordance with ISO/IEC 17025:2005 and ANSI/NCSL Z540-1 standard, traceable to NIST, JIS &amp; DIN.
<h3>Specifications</h3>
<ul>
<li>Measuring range: 0.000° ~ ±2.000° dual-axis</li>
<li>Resolution: 0.0002”/ft or 5-second (0.020 mm/M or 0.001°)</li>
<li>Accuracy: ±0.0004”/ft or 10-second (± 0.002°) from 0° to ±0.5° ± 0.004° at other angles</li>
<li>User may use device without or with Bluetooth® Measurement when paired with smartphone &amp; Digi-Pas Machinist level App</li>
<li>Bluetooth range: approx. 50ft.</li>
<li>Operating temperature range: 10°F to 120°F or -10°C to +50°C</li>
<li>ACCURACY of Digi-Pas digital level is verified by accredited 3rd Party Calibration &amp; Test Laboratories in USA, Japan and Germany traceable to NIST, JIS &amp; DIN.</li>
</ul>
<h3>Application Examples</h3>
 Digi-Pas® DWL-1500XY are used for installation, setup, maintenance of milling &amp; surface grinding CNC machines. It is able to accurately level jig &amp; fixtures and worktable of the machines prior to machining process for achieving exact and precise flat surface machining. Precise fabrication setups keep the machined parts within the required tolerance.
The simultaneous display for dual-axis feature of Digi-Pas® DWL-1500XY master machinist digital level speeding up alignment procedures and reducing training level for new operators to reliably achieve precise levelling results. Operator does not need to meticulously taking readings in both directions over and again as experienced with traditional single-axis levels.
Digi-Pas DWL-1500XY 2-Axis model is used for Vision Measurement Equipment installation &amp; setup. Levelling &amp; checking equipment's positional Stability for high quality sharp image capturing &amp; measurement.
Digi-Pas DWL-1500XY is used for aligning precision fixtures. Absolute levelling and positional accuracy are required in meeting tight tolerance for highest quality in many manufacturing processes within semiconductor wafer foundries.
Digi-Pas DWL-1500XY dual axis model is used for monitoring a precision wafer manufacturing equipment's performance.

Digipas Precision Machinist Level Dwl 1500XY

digipas precision machinist level dwl 1500xy measurement pengukuran digi-pas pengukur aras 精密机械水平仪

digipas-precision-machinist-level-dwl-1500xy

Kaiterra Sensedge Mini
Smart Air Quality Monitoring Solutions
Commercial Grade Sensors 
(Model No.: SE-200A)

Kaiterra creates high-accuracy air quality monitors and data solutions for consumers, businesses, governments, and industrial use.

The Sensedge Mini provides real-time, accurate measurements of PM2.5, TVOC, and CO2 concentrations, as well as temperature and relative humidity readings. With multiple power, connectivity, and installation options, the Sensedge Mini is made to the satisfaction of building owners, facility managers, tenants, and employees.

Tested and certified by the RESET standard for accuracy, the Sensedge is fully compliant with various green building and air quality standards, including WELL v2, LEED, RESET, the Living Building Challenge, and Fitwel.

Best-in-Class Sensors & Algorithms
The accuracy and reliability of your data is ensured by sensing components made in Switzerland, and the innovative cloud-based calibration used in our products.

Modular Design
Kaiterra’s signature modular design allows customizable modules to fit specific monitoring requirements and completely removes the need for the traditional costly calibration processes.

Secure & Accessible Data
Your data is brought to life by the Kaiterra Dashboard and Live Air app, where you can view real-time and historical data, identify air pollution trends, set up alerts, and download for further analysis.

Robust Quality Control
Our 100% traceable production process, along with top-tier, Apple MFi certified factories that we partner with is an additional step we take to ensure that our products are of the highest caliber.

Online real-time detecting indoor air quality

Building Energy Saving Reconstruction and Assessment System

Classroom, office, exhibition hall, shopping mall, any public places

Particulate Matter Sensor (KM-200, Silver Module)

Mass concentration range: 0 to 1,000μg/㎥

Sensor technology: Laser particle sensor (Light scattering) 

High pollution concentration (> 200 μg/m3): 1.3 years

Low pollution concentration (< 100 μg/m3): 2 years

Calibration: Calibrated against a standardized aerosol mix

Target gas profile: Complex mixture of 22 VOCs1 as defined by Molhav et al.

Sensor technology: Multi-pixel metal oxide sensor (MOx)

1 n-Hexane, n-Nonane, n-Decane, n-Undecane,1-Octane, 1-Decene, Cyclohexane, m-Xylene, Ethylbenzene, 1,2,4-Trimethylbenzene, n-Propylbenzene, a-Pinene, n-Pentanal, n-Hexanal, Iso-propanol, n-Butanol, 2-Butanone, 3-Methyl-3-butanone, 4-Methyl-2-pentanone, n-Butylacetate, Ethoxyethylacetate, 1, 2-Dichloroethane.

Sensor technology: Non-Dispersive Infrared (NDIR)

2 Extended exposure to concentrations below 400 ppm may result in incorrect operation of the ABC algorithm and should be avoided.
3 Sensor provides readings in the extended range but the accuracy may be lower than that specified in the table.
4 Accuracy is specified over an operating temperature range. The specification is referenced to certified calibration mixtures. Uncertainty of calibration gas mixtures (±2% currently) is to be added to the specified accuracy for absolute measurements.

5 Typical value for operation in normal RH/T operating range. Higher drift values may occur due to contaminant environments with vaporized solvents, out-gassing tapes, adhesives, packaging materials, etc.
6 Temperature response times strongly depend on the type of heat exchange, the surrounding surface, and the airflow in the final application environment.

7 Humidity response times strongly depend on the surrounding surface and the airflow in the final application environment.

Calibration: Calibration via hot-swappable sensor modules

Frequency of readings (Log interval): 1 minute, 1 hour, 1 day

Dimension: 155(L) x 129(W) x 34(H) mm (6.1 x 5.1 x 1.3 in.)

8 Customizable upon request
9 Optional extended warranty with contract

installation Surface, Drywall, Electrical box, or ceiling mount

Security supported: 64/128 WEP, WPA-PSK, WPA2-PSK, WPA, WPA2 Personal

Kaiterra Sensedge Mini Smart Air Quality Monitoring Solutions Commercial Grade Sensors  (Model No.: SE-200A)Products of Switzerland DescriptionsKaiterra creates high-accuracy air quality monitors and data solutions for consumers, businesses, governments, and industrial use.The Sensedge Mini provides real-time, accurate measurements of PM2.5, TVOC, and CO2 concentrations, as well as temperature and relative humidity readings. With multiple power, connectivity, and installation options, the Sensedge Mini is made to the satisfaction of building owners, facility managers, tenants, and employees.Tested and certified by the RESET standard for accuracy, the Sensedge is fully compliant with various green building and air quality standards, including WELL v2, LEED, RESET, the Living Building Challenge, and Fitwel.Designed to Make a Difference<ul class="md-block-unordered-list-item"><li>Best-in-Class Sensors &amp; Algorithms The accuracy and reliability of your data is ensured by sensing components made in Switzerland, and the innovative cloud-based calibration used in our products.</li><li>Modular Design Kaiterra’s signature modular design allows customizable modules to fit specific monitoring requirements and completely removes the need for the traditional costly calibration processes.</li><li>Secure &amp; Accessible Data Your data is brought to life by the Kaiterra Dashboard and Live Air app, where you can view real-time and historical data, identify air pollution trends, set up alerts, and download for further analysis.</li><li>Robust Quality Control Our 100% traceable production process, along with top-tier, Apple MFi certified factories that we partner with is an additional step we take to ensure that our products are of the highest caliber.</li></ul>Applications<ul class="md-block-unordered-list-item"><li>Online real-time detecting indoor air quality</li><li>Green Building Assessment</li><li>BAS and HVAC systems</li><li>Smart Home System</li><li>Fresh Air Controlling System</li><li>Building Energy Saving Reconstruction and Assessment System</li><li>Classroom, office, exhibition hall, shopping mall, any public places</li></ul>Features<ul class="md-block-unordered-list-item"><li>RESET Grade B Certified</li><li>Modular Design</li><li>Cloud &amp; 1-hour Local Storage</li><li>Minimal Unobtrusive Design</li></ul>Specification:<ul class="md-block-unordered-list-item"><li>Particulate Matter Sensor (KM-200, Silver Module)</li><ul class="md-block-unordered-list-item"><li>Mass concentration range: 0 to 1,000μg/㎥</li><li>Mass concentration size:</li><ul class="md-block-unordered-list-item"><li>PM2.5: 0.3 to 2.5 μg/m3</li><li>PM10.0: 0.3 to 10.0 μm</li></ul><li>Mass concentration accurcy for PM2.5</li><ul class="md-block-unordered-list-item"><li>0 to 30 μg/m3:  ±3 μg/m3</li><li>30 to 1000 μg/m3:  ±10% m.v.</li></ul><li>Sensor output resolution: 1 μg/m3</li><li>Sensor technology: Laser particle sensor (Light scattering) </li><li>Typical response time: 10 s</li><li>Recommended lifetime: </li><ul class="md-block-unordered-list-item"><li>High pollution concentration (&gt; 200 μg/m3): 1.3 years</li><li>Low pollution concentration (&lt; 100 μg/m3): 2 years</li></ul><li>Calibration: Calibrated against a standardized aerosol mix</li></ul><li>TVOC Sensor (KM-200, Gold Module)</li><ul class="md-block-unordered-list-item"><li>Target gas profile: Complex mixture of 22 VOCs1 as defined by Molhav et al.</li><li>Measuring Range: 0~60000 ppb</li><li>Accuracy: ±15% ±8 ppb</li><li>Sampling process: Diffusion</li><li>Calibration: Calibrated again ethanol</li><li>Sensor output resolution: 1 ppb</li><li>Sensor technology: Multi-pixel metal oxide sensor (MOx)</li><li>Typical start-up time: 0.4 ms</li></ul><li>1 n-Hexane, n-Nonane, n-Decane, n-Undecane,1-Octane, 1-Decene, Cyclohexane, m-Xylene, Ethylbenzene, 1,2,4-Trimethylbenzene, n-Propylbenzene, a-Pinene, n-Pentanal, n-Hexanal, Iso-propanol, n-Butanol, 2-Butanone, 3-Methyl-3-butanone, 4-Methyl-2-pentanone, n-Butylacetate, Ethoxyethylacetate, 1, 2-Dichloroethane.</li><li>Carbon Dioxide CO2 Sensor (Built-in)</li><ul class="md-block-unordered-list-item"><li>Target gas: CO2</li><li>Measurement Range:</li><ul class="md-block-unordered-list-item"><li>400 ~ 2000ppm2</li><li>Up to 10,000 ppm extended range3</li></ul><li>Accuracy4: ± 3% ±50 ppm</li><li>Typical response time: 2 minutes by 90%</li><li>Sensor technology: Non-Dispersive Infrared (NDIR)</li><li>Sensor output resolution: 1 ppm</li><li>Recommended lifetime: 15+ years </li></ul><li>2 Extended exposure to concentrations below 400 ppm may result in incorrect operation of the ABC algorithm and should be avoided. 3 Sensor provides readings in the extended range but the accuracy may be lower than that specified in the table. 4 Accuracy is specified over an operating temperature range. The specification is referenced to certified calibration mixtures. Uncertainty of calibration gas mixtures (±2% currently) is to be added to the specified accuracy for absolute measurements.</li><li>Temperature Sensor (Built-in)</li><ul class="md-block-unordered-list-item"><li>Measuring Range: -20℃~100℃</li><li>Accuracy: Temperature︰±1℃</li><li>Long term drift5: &lt;0.03 ℃/yr</li><li>Typical response time6: &gt;2s</li><li>Sensor technology: Digital sensor</li><li>Sensor output resolution: 1℃</li><li>Recommended lifetime: 10 years </li></ul><li>5 Typical value for operation in normal RH/T operating range. Higher drift values may occur due to contaminant environments with vaporized solvents, out-gassing tapes, adhesives, packaging materials, etc. 6 Temperature response times strongly depend on the type of heat exchange, the surrounding surface, and the airflow in the final application environment.</li><li>Humidity Sensor (Built-in)</li><ul class="md-block-unordered-list-item"><li>Measuring Range: 0~99%RH</li><li>Accuracy: ±5%RH</li><li>Long term drift: &lt;0.25% RH/yr</li><li>Typical response time7: &gt;8s</li><li>Sensor technology: Digital sensor</li><li>Sensor output resolution: 1% RH</li><li>Resolution: 1%RH</li><li>Recommended lifetime: 10 years</li></ul><li>7 Humidity response times strongly depend on the surrounding surface and the airflow in the final application environment.</li><li>General Data</li><ul class="md-block-unordered-list-item"><li>Calibration: Calibration via hot-swappable sensor modules</li><li>Operating conditions:</li><ul class="md-block-unordered-list-item"><li>Temperature: 0~50℃</li><li>Humidity︰5~95%RH, non-condensing</li></ul><li>Data storage &amp; logging:</li><ul class="md-block-unordered-list-item"><li>Frequency of readings (Log interval): 1 minute, 1 hour, 1 day</li><li>Data push interval: 1 minute8</li><li>Onboard memory: 1 hour of data</li></ul><li>Dimension: 155(L) x 129(W) x 34(H) mm (6.1 x 5.1 x 1.3 in.)</li><li>Weight: 370g (0.82 lbs)</li><li>Warranty &amp; durability:</li><ul class="md-block-unordered-list-item"><li>Standard warranty: 1 year9</li><li>Expected lifespan: 5 to 7 years</li></ul><li>8 Customizable upon request 9 Optional extended warranty with contract</li></ul><li>Power and Connectivity Options</li><ul class="md-block-unordered-list-item"><li>installation Surface, Drywall, Electrical box, or ceiling mount</li><li>Wi-Fi:</li><ul class="md-block-unordered-list-item"><li>2.4 GHz 802.11 b/g/n</li><li>Security supported: 64/128 WEP, WPA-PSK, WPA2-PSK, WPA, WPA2 Personal</li></ul><li>Ethernet: IEEE 802.3; Data rate: Up to 100 Mbps</li><li>Modbus (RS-485): RS-485 Modbus/RTU</li><li>Integration: Local and cloud MQTT; Open API</li><li>Power:</li><ul class="md-block-unordered-list-item"><li>100~240V AC via USB Type-C</li><li>12~30V DC via direct wiring</li></ul></ul></ul>

Kaiterra Sensedge Mini 
Smart Air Quality Monitoring Solutions 
Commercial Grade Sensors  
(Model No.: SE-200A)
<ins>Products of Switzerland</ins>
&nbsp;Descriptions
Kaiterra creates high-accuracy air quality monitors and data solutions for consumers, businesses, governments, and industrial use.
The Sensedge Mini provides real-time, accurate measurements of PM2.5, TVOC, and CO2 concentrations, as well as temperature and relative humidity readings. With multiple power, connectivity, and installation options, the Sensedge Mini is made to the satisfaction of building owners, facility managers, tenants, and employees.
Tested and certified by the RESET standard for accuracy, the Sensedge is fully compliant with various green building and air quality standards, including WELL v2, LEED, RESET, the Living Building Challenge, and Fitwel.
Designed to Make a Difference
<ul>
<li>Best-in-Class Sensors &amp; Algorithms 
The accuracy and reliability of your data is ensured by sensing components made in Switzerland, and the innovative cloud-based calibration used in our products.</li>
<li>Modular Design 
Kaiterra’s signature modular design allows customizable modules to fit specific monitoring requirements and completely removes the need for the traditional costly calibration processes.</li>
<li>Secure &amp; Accessible Data 
Your data is brought to life by the Kaiterra Dashboard and Live Air app, where you can view real-time and historical data, identify air pollution trends, set up alerts, and download for further analysis.</li>
<li>Robust Quality Control 
Our 100% traceable production process, along with top-tier, Apple MFi certified factories that we partner with is an additional step we take to ensure that our products are of the highest caliber.</li>
</ul>
Applications
<ul>
<li>Online real-time detecting indoor air quality</li>
<li>Green Building Assessment</li>
<li>BAS and HVAC systems</li>
<li>Smart Home System</li>
<li>Fresh Air Controlling System</li>
<li>Building Energy Saving Reconstruction and Assessment System</li>
<li>Classroom, office, exhibition hall, shopping mall, any public places</li>
</ul>
Features
<ul>
<li>RESET Grade B Certified</li>
<li>Modular Design</li>
<li>Cloud &amp; 1-hour Local Storage</li>
<li>Minimal Unobtrusive Design</li>
</ul>
Specification:
<ul>
<li>Particulate Matter Sensor (KM-200, Silver Module)</li>
<ul>
<li>Mass concentration range: 0 to 1,000μg/㎥</li>
<li>Mass concentration size:</li>
<ul>
<li>PM2.5: 0.3 to 2.5 μg/m3</li>
<li>PM10.0: 0.3 to 10.0 μm</li>
</ul>
<li>Mass concentration accurcy for PM2.5</li>
<ul>
<li>0 to 30 μg/m3:  ±3 μg/m3</li>
<li>30 to 1000 μg/m3:  ±10% m.v.</li>
</ul>
<li>Sensor output resolution: 1 μg/m3</li>
<li>Sensor technology: Laser particle sensor (Light scattering) </li>
<li>Typical response time: 10 s</li>
<li>Recommended lifetime: </li>
<ul>
<li>High pollution concentration (&gt; 200 μg/m3): 1.3 years</li>
<li>Low pollution concentration (&lt; 100 μg/m3): 2 years</li>
</ul>
<li>Calibration: Calibrated against a standardized aerosol mix</li>
</ul>
<li>TVOC Sensor (KM-200, Gold Module)</li>
<ul>
<li>Target gas profile: Complex mixture of 22 VOCs1 as defined by Molhav et al.</li>
<li>Measuring Range: 0~60000 ppb</li>
<li>Accuracy: ±15% ±8 ppb</li>
<li>Sampling process: Diffusion</li>
<li>Calibration: Calibrated again ethanol</li>
<li>Sensor output resolution: 1 ppb</li>
<li>Sensor technology: Multi-pixel metal oxide sensor (MOx)</li>
<li>Typical start-up time: 0.4 ms</li>
</ul>
<li>1 n-Hexane, n-Nonane, n-Decane, n-Undecane,1-Octane, 1-Decene, Cyclohexane, m-Xylene, Ethylbenzene, 1,2,4-Trimethylbenzene, n-Propylbenzene, a-Pinene, n-Pentanal, n-Hexanal, Iso-propanol, n-Butanol, 2-Butanone, 3-Methyl-3-butanone, 4-Methyl-2-pentanone, n-Butylacetate, Ethoxyethylacetate, 1, 2-Dichloroethane.</li>
<li>Carbon Dioxide CO2 Sensor (Built-in)</li>
<ul>
<li>Target gas: CO2</li>
<li>Measurement Range:</li>
<ul>
<li>400 ~ 2000ppm2</li>
<li>Up to 10,000 ppm extended range3</li>
</ul>
<li>Accuracy4: ± 3% ±50 ppm</li>
<li>Typical response time: 2 minutes by 90%</li>
<li>Sensor technology: Non-Dispersive Infrared (NDIR)</li>
<li>Sensor output resolution: 1 ppm</li>
<li>Recommended lifetime: 15+ years 
</li>
</ul>
<li>2 Extended exposure to concentrations below 400 ppm may result in incorrect operation of the ABC algorithm and should be avoided. 
3 Sensor provides readings in the extended range but the accuracy may be lower than that specified in the table. 
4 Accuracy is specified over an operating temperature range. The specification is referenced to certified calibration mixtures. Uncertainty of calibration gas mixtures (±2% currently) is to be added to the specified accuracy for absolute measurements.</li>
<li>Temperature Sensor (Built-in)</li>
<ul>
<li>Measuring Range: -20℃~100℃</li>
<li>Accuracy: Temperature︰±1℃</li>
<li>Long term drift5: &lt;0.03 ℃/yr</li>
<li>Typical response time6: &gt;2s</li>
<li>Sensor technology: Digital sensor</li>
<li>Sensor output resolution: 1℃</li>
<li>Recommended lifetime: 10 years 
</li>
</ul>
<li>5 Typical value for operation in normal RH/T operating range. Higher drift values may occur due to contaminant environments with vaporized solvents, out-gassing tapes, adhesives, packaging materials, etc. 
6 Temperature response times strongly depend on the type of heat exchange, the surrounding surface, and the airflow in the final application environment.</li>
<li>Humidity Sensor (Built-in)</li>
<ul>
<li>Measuring Range: 0~99%RH</li>
<li>Accuracy: ±5%RH</li>
<li>Long term drift: &lt;0.25% RH/yr</li>
<li>Typical response time7: &gt;8s</li>
<li>Sensor technology: Digital sensor</li>
<li>Sensor output resolution: 1% RH</li>
<li>Resolution: 1%RH</li>
<li>Recommended lifetime: 10 years</li>
</ul>
<li>7 Humidity response times strongly depend on the surrounding surface and the airflow in the final application environment.</li>
<li>General Data</li>
<ul>
<li>Calibration: Calibration via hot-swappable sensor modules</li>
<li>Operating conditions:</li>
<ul>
<li>Temperature: 0~50℃</li>
<li>Humidity︰5~95%RH, non-condensing</li>
</ul>
<li>Data storage &amp; logging:</li>
<ul>
<li>Frequency of readings (Log interval): 1 minute, 1 hour, 1 day</li>
<li>Data push interval: 1 minute8</li>
<li>Onboard memory: 1 hour of data</li>
</ul>
<li>Dimension: 155(L) x 129(W) x 34(H) mm (6.1 x 5.1 x 1.3 in.)</li>
<li>Weight: 370g (0.82 lbs)</li>
<li>Warranty &amp; durability:</li>
<ul>
<li>Standard warranty: 1 year9</li>
<li>Expected lifespan: 5 to 7 years</li>
</ul>
<li>8 Customizable upon request 
9 Optional extended warranty with contract</li>
</ul>
<li>Power and Connectivity Options</li>
<ul>
<li>installation Surface, Drywall, Electrical box, or ceiling mount</li>
<li>Wi-Fi:</li>
<ul>
<li>2.4 GHz 802.11 b/g/n</li>
<li>Security supported: 64/128 WEP, WPA-PSK, WPA2-PSK, WPA, WPA2 Personal</li>
</ul>
<li>Ethernet: IEEE 802.3; Data rate: Up to 100 Mbps</li>
<li>Modbus (RS-485): RS-485 Modbus/RTU</li>
<li>Integration: Local and cloud MQTT; Open API</li>
<li>Power:</li>
<ul>
<li>100~240V AC via USB Type-C</li>
<li>12~30V DC via direct wiring</li>
</ul>
</ul>
</ul>

Datasheet

CEM instruments

TENMARS

Others

NAVIS anemomter

EMFields

UbiBot

BRAMC

ATAGO

Humidity & Temperature

Weight, Force & Pressure Gauges

EMF & Frequency Meters

Light Meters & Imaging

Kitchen Tools

Sound & Vibration Meters

Motor Rotation & Phase

Flow & PH Meters

Suzie Tan

Kaiterra Sensedge Mini 5-in-1 PM2.5 Tvoc CO2 Temperature Rh Monitoring Solutions

kaiterra sensedge mini 5-in-1 pm2.5 tvoc co2 temperature rh monitoring solutions solusi pemantauan suhu air quality meters pengukur kualitas udara 5-dalam-1 penyelesaian meter kualiti 温度 监测解决方案 空气质量计 凯特拉

kaiterra-sensedge-mini-5-in-1-pm2-5-tvoc-co2-temperature-rh-monitoring-solutions

Coating Thickness Gages for ALL Metal Substrates

The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly.

Ready to measure—no calibration adjustment required for most applications

NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation

NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure

Wear resistant ruby probe tip, for long-lasting calibration

PosiTector interchangeable platform—attach any PosiTector probe to a single gage body

USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software

Certificate of Calibration showing traceability to NIST or PTB included (Long Form)

Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others 

Durable - Ergonomic design, waterproof, dustproof, water-resistant - IP65-rated enclosure

Accurate - Built-in temperature compensation ensures measurement accuracy

Versatility - Selectable display language, auto-rotating display with flip lock, multiple calibration adjustment options

Powerful - Screen Capture, Instant-on, Statistics mode which continually display average, standard deviation, minimum/maximum and number of readings

<h2 class="md-block-header-two">Coating Thickness Gages for ALL Metal Substrates</h2><h3 class="md-block-header-three">The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly.</h3><ul class="md-block-unordered-list-item"><li>Ready to measure—no calibration adjustment required for most applications</li><li>NEW Larger 2.8&quot; impact resistant color touchscreen with redesigned keypad for quick menu navigation</li><li>NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure</li><li>Wear resistant ruby probe tip, for long-lasting calibration</li><li>PosiTector interchangeable platform—attach any PosiTector probe to a single gage body</li><li>USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software</li><li>Certificate of Calibration showing traceability to NIST or PTB included (Long Form)</li></ul>Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others <h3 class="md-block-header-three"> Features</h3><ul class="md-block-unordered-list-item"><li>Simple - Fast measurement speed</li><li>Durable - Ergonomic design, waterproof, dustproof, water-resistant - IP65-rated enclosure</li><li>Accurate - Built-in temperature compensation ensures measurement accuracy</li><li>Versatility - Selectable display language, auto-rotating display with flip lock, multiple calibration adjustment options</li><li>Powerful - Screen Capture, Instant-on, Statistics mode which continually display average, standard deviation, minimum/maximum and number of readings</li></ul>

&nbsp;
<h2>Coating Thickness Gages for ALL Metal Substrates</h2>
<h3>The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly.</h3>
<ul>
<li>Ready to measure—no calibration adjustment required for most applications</li>
<li>NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation</li>
<li>NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure</li>
<li>Wear resistant ruby probe tip, for long-lasting calibration</li>
<li>PosiTector interchangeable platform—attach any PosiTector probe to a single gage body</li>
<li>USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software</li>
<li>Certificate of Calibration showing traceability to NIST or PTB included (Long Form)</li>
</ul>
Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others&nbsp;

<h3>&nbsp;Features</h3>
<ul>
<li>Simple - Fast measurement speed</li>
<li>Durable - Ergonomic design, waterproof, dustproof, water-resistant - IP65-rated enclosure</li>
<li>Accurate - Built-in temperature compensation ensures measurement accuracy</li>
<li>Versatility - Selectable display language, auto-rotating display with flip lock, multiple calibration adjustment options</li>
<li>Powerful - Screen Capture, Instant-on, Statistics mode which continually display average, standard deviation, minimum/maximum and number of readings</li>
</ul>

Shawn

G.A.L Gage

Western Instruments

Lindy

Safeware

Phoenix

IT Accessories

Optical

Cables & Adapters

Safety Helmet

Hammers & Mallets

Hooks & Eyes

Coating Thickness Gage

coating thickness gage pengukur ketebalan lapisan ultrasonic gauges defelsko tolok salutan defelsko/德费尔斯科 涂层测厚仪 德费尔斯科

coating-thickness-gage

 Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool.


Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips.


• 0.02% accuracy
• 24 V loop supply with mA measure
• Simultaneous mA and % of span display
• Selectable step/ramp outputs
• mA sourcing, simulation and measurement
• Compact case and protective holster
• Quick battery replacement


Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics.


How much current flows in each loop of a parallel circuit?

Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same.


9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data

FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091

Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings.


• Helpful for linearity checks thanks to its dedicated push button for 25% increments
• Switchable between stepped or ramped output to meet your application needs
• 9V battery is easy to change without opening the case and affecting the calibration seal
• 'Span check' function gives you speedily calculated results for zero and span measurements


• Test and measurement devices
• Research and development labs
• Electronics servicing


What's the benefit of this product's internal loop supply?

This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU. 

<h3 class="md-block-header-three">Fluke 705, 24mA Loop Calibrator</h3> Fluke&#x27;s integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool. Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips. <h3 class="md-block-header-three">Features and Benefits:</h3>• 0.02% accuracy • 24 V loop supply with mA measure • Simultaneous mA and % of span display • Selectable step/ramp outputs • mA sourcing, simulation and measurement • Compact case and protective holster • Quick battery replacement <h3 class="md-block-header-three">FAQ&#x27;s</h3><h3 class="md-block-header-three">What is a current loop calibrator?</h3>Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics. <h3 class="md-block-header-three">How much current flows in each loop of a parallel circuit?</h3>Determined by Ohm&#x27;s law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same. <h3 class="md-block-header-three">Supplied with</h3>9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data<h3 class="md-block-header-three">FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</h3>Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit&#x27;s tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it&#x27;s protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings. <h3 class="md-block-header-three">Features &amp; Benefits</h3>• Helpful for linearity checks thanks to its dedicated push button for 25% increments • Switchable between stepped or ramped output to meet your application needs • 9V battery is easy to change without opening the case and affecting the calibration seal • &#x27;Span check&#x27; function gives you speedily calculated results for zero and span measurements <h3 class="md-block-header-three">Applications</h3>• Test and measurement devices • Research and development labs • Electronics servicing <h3 class="md-block-header-three">What&#x27;s the benefit of this product&#x27;s internal loop supply?</h3>This product&#x27;s 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.

<h3>Fluke 705, 24mA Loop Calibrator</h3>
&nbsp;Fluke's integrated solution for calibration, maintenance of milliamp loops and repair, the 705 current loop calibrator is an ideal cost-effective source and measurement tool. 

Delivering a mA accuracy of 0.02% it also provides quick and easy readings due to the simultaneous % and mA display. For 0 to 20 mA or 4 to 20 mA current loop testing and dc voltage from 0 to 28 V, it is supplied with a set of TL75 test leads (726-3624) and alligator clips. 

<h3>Features and Benefits:</h3>
• 0.02% accuracy 
• 24 V loop supply with mA measure 
• Simultaneous mA and % of span display 
• Selectable step/ramp outputs 
• mA sourcing, simulation and measurement 
• Compact case and protective holster 
• Quick battery replacement 

<h3>FAQ's</h3>
<h3>What is a current loop calibrator?</h3>
Current loop calibrators are specially designed instruments for current loop trouble shooting, testing and calibration. They can source current on unpowered devices in a loop, simulate the operation of loop powered transmitters and also measure current. These calibrators often feature time saving technology, specialist graphics using digital interfaces and micro-processor based electronics. 

<h3>How much current flows in each loop of a parallel circuit?</h3>
Determined by Ohm's law, which states that the current between 2 points through a conductor is directly proportionate to the voltage across those 2 points, divided by the resistance of the conductor. I = V/R. This is also the case for series and parallel circuits, however in parallel circuits the total current can be affected by the way the resistors have been connected, as well as their ohmic value. Current does divide up and there can be more current in one area over another nonetheless when all areas are added up the total amount is the same. 

<h3>Supplied with</h3>
9V installed alkaline battery, AC70A alligator clips, C10 protective yellow holster Flex-Stand™, instruction sheet, TL75 safety-designed test lead set, NIST- traceable calibration report and data
<h3>FLUKE Loop Calibrator, -10°C to +55°C Operating Temperature, Shock and Vibration Resistant - 705 Series - 0665091</h3>
Troubleshooting circuits is fuss-free with this loop calibrator from FLUKE. Use it to calibrate and test current loops so you can identify and repair faults promptly to keep your system running safely. You can expect precise current readings thanks to the unit's tight mA accuracy of 0.02%. The results are quick and easy to interpret too, as having readouts as both mA and % means you always get the full picture. As it's protected by a handy yellow holster, this gadget withstands knocks for reliable use in demanding industrial settings. 

<h3>Features &amp; Benefits</h3>
• Helpful for linearity checks thanks to its dedicated push button for 25% increments 
• Switchable between stepped or ramped output to meet your application needs 
• 9V battery is easy to change without opening the case and affecting the calibration seal 
• 'Span check' function gives you speedily calculated results for zero and span measurements 

<h3>Applications</h3>
• Test and measurement devices 
• Research and development labs 
• Electronics servicing 

<h3>What's the benefit of this product's internal loop supply?</h3>
This product's 24V internal loop supply provides advanced functionality, as it lets you power and read a transmitter at the same time. This eliminates the need for a separate digital multimeter and PSU.&nbsp;

RS Pro

SCHNEIDER ELECTRIC

Fluke Networks

Abus

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Molded Case Circuit Breakers - MCCBs

Junction & Enclosure Box

Electrical Wire 

RS Components ETH SG

Fluke 705, 24mA Loop Calibrator

fluke 705, 24ma loop calibrator kalibrator electrical power testing pengujian daya listrik gelung ujian tenaga elektrik fluke/福禄克 705，24ma 回路校准器 电力测试 福禄克