ACISION

DeFelsko

ELORA

Extech

FLUKE

Kaiterra

Lavatools

PCE Instruments

Piecal

Vogel

Test & Measurement

test-measurement

Air Quality Meters

air-quality-meters

Calibrators

calibrators

Flow Measurement

flow-measurement

Flow & PH Meters

flow-ph-meters

Industrial Thermometer

industrial-thermometer

Other Measuring Tools

other-measuring-tools

Tachometers

tachometers

Spanners & Sockets

spanners-sockets

Torque Wrenches

torque-wrenches

Piecal 541 Frequency Process Calibrator With Totalizer Function

 The PIE 541 Frequency Calibrator is designed for calibration, testing, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators, and any other frequency devices in the shop, plant or field. Save hours of time compared to other calibration methods. When calibrating a totalizer, the Model 541 eliminates the need of a stop watch. Set the number of pulses and number of minutes required and it automatically stops when the selected number of pulses has been sent to the totalizer! The PIE 541 has a handy LED indicator showing gate time for easy trigger level adjustment. The LED also pulses with the frequency output for calibration of optical pickups.  

5 ranges from 1 CPH (Count-Per-Hour) to 20.000 KHz for source and read

Totalize inputs/outputs from 1 to 99999 pulses in 1.0 to 100.0 minutes.

Read a wide range of frequencies and waveforms from 50 mV to 120V peak.

Source sine and square waves with zero based or zero crossing waveforms.

Adjustable output amplitude from 100 mV to 12 V peak-to-peak.

Gate trigger LED flashes in synch with the output frequency to calibrate optical pickups. This also allows easy adjustment of the attenuation for proper gate triggering.

EZ-Dial™ knob easily adjusts output by 1; press down and while turning the knob for a faster dialing speed

EZ-Check™ switch for instant 0% and 100% span adjustments

Store new EZ-Check™ values by pressing the EZ-Dial™ knob

Uses a standard 9V Alkaline battery with easy access to the battery compartment

Superior battery life of 45 hours under typical continuous usage

Carrying case included and optional Test Data available

NIST Traceable Calibration Certificate included

<h3 class="md-block-header-three">Piecal 541 Frequency Process Calibrator With Totalizer Function</h3> The PIE 541 Frequency Calibrator is designed for calibration, testing, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators, and any other frequency devices in the shop, plant or field. Save hours of time compared to other calibration methods. When calibrating a totalizer, the Model 541 eliminates the need of a stop watch. Set the number of pulses and number of minutes required and it automatically stops when the selected number of pulses has been sent to the totalizer! The PIE 541 has a handy LED indicator showing gate time for easy trigger level adjustment. The LED also pulses with the frequency output for calibration of optical pickups. <ul class="md-block-unordered-list-item"><li>Accuracy: ± 0.005% of range</li><li>5 ranges from 1 CPH (Count-Per-Hour) to 20.000 KHz for source and read</li><li>Totalize inputs/outputs from 1 to 99999 pulses in 1.0 to 100.0 minutes.</li><li>Read a wide range of frequencies and waveforms from 50 mV to 120V peak.</li><li>Source sine and square waves with zero based or zero crossing waveforms.</li><li>Adjustable output amplitude from 100 mV to 12 V peak-to-peak.</li><li>Gate trigger LED flashes in synch with the output frequency to calibrate optical pickups. This also allows easy adjustment of the attenuation for proper gate triggering.</li><li>EZ-Dial™ knob easily adjusts output by 1; press down and while turning the knob for a faster dialing speed</li><li>EZ-Check™ switch for instant 0% and 100% span adjustments</li><li>Store new EZ-Check™ values by pressing the EZ-Dial™ knob</li><li>Uses a standard 9V Alkaline battery with easy access to the battery compartment</li><li>Superior battery life of 45 hours under typical continuous usage</li><li>Small, tough and protected to 60V</li><li>Carrying case included and optional Test Data available</li><li>NIST Traceable Calibration Certificate included</li></ul>

<h3>Piecal 541 Frequency Process Calibrator With Totalizer Function</h3>
&nbsp;The PIE 541 Frequency Calibrator is designed for calibration, testing, and diagnosing turbine meters, frequency counters, vibration systems, tachometers, vortex shedders, integrators, and any other frequency devices in the shop, plant or field. Save hours of time compared to other calibration methods. When calibrating a totalizer, the Model 541 eliminates the need of a stop watch. Set the number of pulses and number of minutes required and it automatically stops when the selected number of pulses has been sent to the totalizer! The PIE 541 has a handy LED indicator showing gate time for easy trigger level adjustment. The LED also pulses with the frequency output for calibration of optical pickups.&nbsp;&nbsp;
<ul>
<li>Accuracy: ± 0.005% of range</li>
<li>5 ranges from 1 CPH (Count-Per-Hour) to 20.000 KHz for source and read</li>
<li>Totalize inputs/outputs from 1 to 99999 pulses in 1.0 to 100.0 minutes.</li>
<li>Read a wide range of frequencies and waveforms from 50 mV to 120V peak.</li>
<li>Source sine and square waves with zero based or zero crossing waveforms.</li>
<li>Adjustable output amplitude from 100 mV to 12 V peak-to-peak.</li>
<li>Gate trigger LED flashes in synch with the output frequency to calibrate optical pickups. This also allows easy adjustment of the attenuation for proper gate triggering.</li>
<li>EZ-Dial™ knob easily adjusts output by 1; press down and while turning the knob for a faster dialing speed</li>
<li>EZ-Check™ switch for instant 0% and 100% span adjustments</li>
<li>Store new EZ-Check™ values by pressing the EZ-Dial™ knob</li>
<li>Uses a standard 9V Alkaline battery with easy access to the battery compartment</li>
<li>Superior battery life of 45 hours under typical continuous usage</li>
<li>Small, tough and protected to 60V</li>
<li>Carrying case included and optional Test Data available</li>
<li>NIST Traceable Calibration Certificate included</li>
</ul>

Center

TRIPLETT

MEGGER

AMPROBE

Fluke Networks

Multimeters

Electrical Power Testing

Clamp Meters

Sound & Vibration Meters

Thermal Imaging Cameras

Humidity & Temperature

Multimeter Leads

CETM

piecal 541 frequency process calibrator totalizer function kalibrator proses frekuensi dengan fungsi calibrators penentukur kekerapan penjumlahan 具有累加器功能的 piecal/皮耶卡尔 频率过程校准器 皮耶卡尔

piecal-541-frequency-process-calibrator-with-totalizer-function

 Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. It can calibrate a linear thermocouple transmitter with the mV source function and also measure mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings for performing quick, linearity checks.  

With the intelligent shutdown feature the Fluke 714B remembers settings when powered down so you can quickly replicate tests after powering back up. The calibrator also has one-year and two-year specifications, along with a traceable certificate of calibration. Combine that with its rugged construction, a backlit display, and easy to use interface

and you have an ideal test tool for temperature calibration professionals who want a highly accurate, single–function thermocouple temperature calibrator.  

Highly accurate, easy-to-use thermocouple temperature calibrator

Measures and simulates 17 thermocouple types and millivolts

Measures 4 to 20 mA signals while sourcing a temperature signal

Comes with a magnetic hanger for convenient hands-free operation

Features configurable source settings for quick linearity checks

Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals

Relative Humidity (% RH operating without condensation):

45% (40°C to 50°C) (Without condensation)

Vibration Requirements: MIL-T-28800E, Class 2

IP Rating: IEC 60529: IP52 (Protected against dust ingress, and protected against direct sprays of water up to 15 degrees from vertical)

Electromagnetic Environment: IEC 61326-1, Portable

Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2

Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries

<h3 class="md-block-header-three">Fluke 714B Thermocouple Calibrator</h3> Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. It can calibrate a linear thermocouple transmitter with the mV source function and also measure mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings for performing quick, linearity checks. With the intelligent shutdown feature the Fluke 714B remembers settings when powered down so you can quickly replicate tests after powering back up. The calibrator also has one-year and two-year specifications, along with a traceable certificate of calibration. Combine that with its rugged construction, a backlit display, and easy to use interfaceand you have an ideal test tool for temperature calibration professionals who want a highly accurate, single–function thermocouple temperature calibrator. <ul class="md-block-unordered-list-item"><li>Highly accurate, easy-to-use thermocouple temperature calibrator</li><li>Measures and simulates 17 thermocouple types and millivolts</li><li>Measures 4 to 20 mA signals while sourcing a temperature signal</li><li>Comes with a magnetic hanger for convenient hands-free operation</li><li>Features configurable source settings for quick linearity checks</li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li><li>Operating Temperature: -10°C to 50°C</li><li>Storage Temperature: -30°C to 60°C</li><li>Operating Altitude: 2,000 m</li><li>Storage Altitude: 12,000 m</li><li>Relative Humidity (% RH operating without condensation):</li><ul class="md-block-unordered-list-item"><li>90% (10°C to 30°C)</li><li>75% (30°C to 40°C)</li><li>45% (40°C to 50°C) (Without condensation)</li></ul><li>Vibration Requirements: MIL-T-28800E, Class 2</li><li>Drop Test Requirements: 1 m</li><li>IP Rating: IEC 60529: IP52 (Protected against dust ingress, and protected against direct sprays of water up to 15 degrees from vertical)</li><li>Electromagnetic Environment: IEC 61326-1, Portable</li><li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li><li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li><li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li><li>Weight: 515 g</li></ul>

<h3>Fluke 714B Thermocouple Calibrator</h3>
&nbsp;Fluke 714B is a handheld, battery-operated instrument that measures and sources a variety of thermocouple types and millivolts. It can calibrate a linear thermocouple transmitter with the mV source function and also measure mA while sourcing temperature. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings for performing quick, linearity checks.&nbsp;&nbsp;
With the intelligent shutdown feature the Fluke 714B remembers settings when powered down so you can quickly replicate tests after powering back up. The calibrator also has one-year and two-year specifications, along with a traceable certificate of calibration. Combine that with its rugged construction, a backlit display, and easy to use interface
and you have an ideal test tool for temperature calibration professionals who want a highly accurate, single–function thermocouple temperature calibrator.&nbsp;&nbsp;
<ul>
<li>Highly accurate, easy-to-use thermocouple temperature calibrator</li>
<li>Measures and simulates 17 thermocouple types and millivolts</li>
<li>Measures 4 to 20 mA signals while sourcing a temperature signal</li>
<li>Comes with a magnetic hanger for convenient hands-free operation</li>
<li>Features configurable source settings for quick linearity checks</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li>
<li>Operating Temperature: -10°C to 50°C</li>
<li>Storage Temperature: -30°C to 60°C</li>
<li>Operating Altitude: 2,000 m</li>
<li>Storage Altitude: 12,000 m</li>
<li>Relative Humidity (% RH operating without condensation):</li>
<ul>
<li>90% (10°C to 30°C)</li>
<li>75% (30°C to 40°C)</li>
<li>45% (40°C to 50°C) (Without condensation)</li>
</ul>
<li>Vibration Requirements: MIL-T-28800E, Class 2</li>
<li>Drop Test Requirements: 1 m</li>
<li>IP Rating: IEC 60529: IP52 (Protected against dust ingress, and protected against direct sprays of water up to 15 degrees from vertical)</li>
<li>Electromagnetic Environment: IEC 61326-1, Portable</li>
<li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li>
<li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li>
<li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li>
<li>Weight: 515 g</li>
</ul>

Fluke 714B Thermocouple Calibrator

fluke 714b thermocouple calibrator kalibrator termokopel calibrators fluke/福禄克 热电偶校准器 福禄克

fluke-714b-thermocouple-calibrator

 Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.  

Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator. 

Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator

Measures and simulates 13 different RTD types and resistance

Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal

Comes with a magnetic hanging tool designed in for convenient hands-free operation

Features configurable 0% and 100% source settings for quick 25% linearity checks

Dual inputs and backlit display for easy interpretation of measurements

Remembers power down settings to easily restart tests when powered up

Provides linear ramp and 25% step auto ramp based on 0% and 100% settings

Provides one-year and two-year specifications and traceable certification of calibration 

IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)

<h3 class="md-block-header-three">Fluke 712B Rtd Calibrators</h3> Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings. Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator. <ul class="md-block-unordered-list-item"><li>Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator</li><li>Measures and simulates 13 different RTD types and resistance</li><li>Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal</li><li>Comes with a magnetic hanging tool designed in for convenient hands-free operation</li><li>Features configurable 0% and 100% source settings for quick 25% linearity checks</li></ul>Other useful features:<ul class="md-block-unordered-list-item"><li>Dual inputs and backlit display for easy interpretation of measurements</li><li>Remembers power down settings to easily restart tests when powered up</li><li>Provides linear ramp and 25% step auto ramp based on 0% and 100% settings</li><li>Provides one-year and two-year specifications and traceable certification of calibration </li></ul><h3 class="md-block-header-three">General Specifications</h3><ul class="md-block-unordered-list-item"><li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li><li>Operating Temperature: -10°C to 50°C</li><li>Storage Temperature: -30°C to 60°C</li><li>Operating Altitude: 2,000 m</li><li>Storage Altitude: 12,000 m</li><li>Relative Humidity (% RH operating without condensation):</li><ul class="md-block-unordered-list-item"><li>90% (10°C to 30°C)</li><li>75% (30°C to 40°C)</li><li>45% (40°C to 50°C)</li></ul><li>Vibration Requirements: MIL-T-28800E, Class 2</li><li>Drop Test Requirements: 1 m</li><li>IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)</li><li>Electromagnetic Environment: IEC 61326-1, Portable</li><li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li><li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li><li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li><li>Weight: 515 g</li></ul>

<h3>Fluke 712B Rtd Calibrators</h3>
&nbsp;Fluke 712B RTD Calibrator is a handheld, battery-operated instrument that measures and sources a variety of RTD types and resistances. It also includes an isolated channel to measure 4-20 mA whiles sourcing a temperature signal. It offers configurable 0% and 100% source settings for quick 25% linearity checks. It also provides linear ramp and 25% step auto ramp functionality based on 0% and 100% settings.&nbsp;&nbsp;
Add to that dual inputs, an easy to view backlit display, plus the ability to memorize settings at power down for easy restart make the 712B the ideal test tool for temperature calibration professionals who want a highly accurate, easy-to-use, single function RTD temperature calibrator.&nbsp;
<ul>
<li>Highly accurate, full-featured , easy-to-use single function RTD temperature calibrator</li>
<li>Measures and simulates 13 different RTD types and resistance</li>
<li>Measures 4 to 20 mA signals while simultaneously sourcing a temperature signal</li>
<li>Comes with a magnetic hanging tool designed in for convenient hands-free operation</li>
<li>Features configurable 0% and 100% source settings for quick 25% linearity checks</li>
</ul>
Other useful features:
<ul>
<li>Dual inputs and backlit display for easy interpretation of measurements</li>
<li>Remembers power down settings to easily restart tests when powered up</li>
<li>Provides linear ramp and 25% step auto ramp based on 0% and 100% settings</li>
<li>Provides one-year and two-year specifications and traceable certification of calibration&nbsp;</li>
</ul>
<h3>General Specifications</h3>
<ul>
<li>Maximum Voltage: 30 V applied between any terminal and earth ground or between any two terminals</li>
<li>Operating Temperature: -10°C to 50°C</li>
<li>Storage Temperature: -30°C to 60°C</li>
<li>Operating Altitude: 2,000 m</li>
<li>Storage Altitude: 12,000 m</li>
<li>Relative Humidity (% RH operating without condensation):</li>
<ul>
<li>90% (10°C to 30°C)</li>
<li>75% (30°C to 40°C)</li>
<li>45% (40°C to 50°C)</li>
</ul>
<li>Vibration Requirements: MIL-T-28800E, Class 2</li>
<li>Drop Test Requirements: 1 m</li>
<li>IP Rating: IEC 60529: IP52 (protected against dust limited ingress, protected against direct sprays of water up to 15 degrees from vertical)</li>
<li>Electromagnetic Environment: IEC 61326-1, Portable</li>
<li>Safety: IEC 61010-1, Max 30 V to earth, Pollution Degree 2</li>
<li>Power Supply: 4 AA NEDA 1.5A IEC LR6 batteries</li>
<li>Size (H x W x L): 52.5 x 84 x 188.5 mm</li>
<li>Weight: 515 g</li>
</ul>

Fluke 712B Rtd Calibrators

fluke 712b rtd calibrators kalibrator penentukuran fluke/福禄克 校准器 福禄克

fluke-712b-rtd-calibrators

Elora 2034-60 10-60 Nm Torque Wrench With Rectangular Intake

Description:- For use with Elora interchangeable spanner heads
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb
safe locking of the set torque value
bi-directional fixing
with robust, matt steel tube
with very noticeable and audible (”click”) signal
2 component Quatrolit handle
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm)
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate

Elora 2034-125 Torque Wrench With Rectangular Intake 25-125 nm

Elora 2034-200 Torque Wrench With Rectangular Intake 40-200 nm

Elora 2034-335 Torque Wrench With Rectangular Intake 65-335 nm

<h3 class="md-block-header-three">Elora 2034-60 10-60 Nm Torque Wrench With Rectangular Intake</h3><h3 class="md-block-header-three">Product code: 2034000601000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 9×12</li><li>SS mm:- 314,5</li><li>Measuring range Nm:- 22190</li><li>Measuring range ft.lb.:- 16681</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 345</li><li>Weight g:- 1000</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 2034-125 Torque Wrench With Rectangular Intake 25-125 nm</h3><h3 class="md-block-header-three">Product code: 2034001251000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 9×12</li><li>SS mm:- 370,5</li><li>Measuring range Nm:- 25-125</li><li>Measuring range ft.lb.:- 15-75</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 438</li><li>Weight g:- 900</li></ul> <h3 class="md-block-header-three">Elora 2034-200 Torque Wrench With Rectangular Intake 40-200 nm</h3><h3 class="md-block-header-three">Product code: 2034002001000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 14×18</li><li>SS mm:- 410,0</li><li>Measuring range Nm:- 40-200</li><li>Measuring range ft.lb.:- 30-150</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 455</li><li>Weight g:- 1198</li></ul> <h3 class="md-block-header-three">Elora 2034-335 Torque Wrench With Rectangular Intake 65-335 nm</h3><h3 class="md-block-header-three">Product code: 2034003351000 </h3><ul class="md-block-unordered-list-item"><li>Description:- For use with Elora interchangeable spanner heads main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb safe locking of the set torque value bi-directional fixing with robust, matt steel tube with very noticeable and audible (”click”) signal 2 component Quatrolit handle factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li><li>Drive mm:- 14×18</li><li>SS mm:- 470,0</li><li>Measuring range Nm:- 65-335</li><li>Measuring range ft.lb.:- 50-250</li><li>Graduation Nm:- 2,5</li><li>Length mm:- 515</li><li>Weight g:- 1305</li></ul>

<h3>Elora 2034-60 10-60 Nm Torque Wrench With Rectangular Intake</h3>
<h3>Product code: 2034000601000 </h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 9×12</li>
<li>SS mm:- 314,5</li>
<li>Measuring range Nm:- 22190</li>
<li>Measuring range ft.lb.:- 16681</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 345</li>
<li>Weight g:- 1000</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 2034-125 Torque Wrench With Rectangular Intake 25-125 nm</h3>
<h3>Product code: 2034001251000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 9×12</li>
<li>SS mm:- 370,5</li>
<li>Measuring range Nm:- 25-125</li>
<li>Measuring range ft.lb.:- 15-75</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 438</li>
<li>Weight g:- 900</li>
</ul>
&nbsp;
<h3>Elora 2034-200 Torque Wrench With Rectangular Intake 40-200 nm</h3>
<h3>Product code: 2034002001000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 14×18</li>
<li>SS mm:- 410,0</li>
<li>Measuring range Nm:- 40-200</li>
<li>Measuring range ft.lb.:- 30-150</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 455</li>
<li>Weight g:- 1198</li>
</ul>
&nbsp;
<h3>Elora 2034-335 Torque Wrench With Rectangular Intake 65-335 nm</h3>
<h3>Product code: 2034003351000&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For use with Elora interchangeable spanner heads 
main measurement unit for Nm with vernier scale, auxiliary measurement unit for ft-lb 
safe locking of the set torque value 
bi-directional fixing 
with robust, matt steel tube 
with very noticeable and audible (”click”) signal 
2 component Quatrolit handle 
factory depth gauges: SV = 17,5 mm (9 x 12 mm) and SV = 25 mm (14 x 18 mm) 
calibration accuracy of +- 3% of the set torque value. Exceeds the requirement of the norm (+- 4%) for your safety 
classified Conforms to DIN EN ISO 6789:2003 Type II Class A, with traceable factory calibration certificate</li>
<li>Drive mm:- 14×18</li>
<li>SS mm:- 470,0</li>
<li>Measuring range Nm:- 65-335</li>
<li>Measuring range ft.lb.:- 50-250</li>
<li>Graduation Nm:- 2,5</li>
<li>Length mm:- 515</li>
<li>Weight g:- 1305</li>
</ul>

Ian Ong

WEICON

LOCTITE

METABO

Permatex

Others

Fujiplus

DEVCON

Molykote

Adhesive Glue

Sealants

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

buyerIntroduction

Elora 2034 Torque Wrench With Rectangular Intake

elora 2034 torque wrench rectangular intake kunci torsi dengan asupan persegi panjang wrenches pas tork pengambilan segi empat perengkuh elora/埃洛拉 2034矩形扳手扭矩扳手 扭力扳手 埃洛拉

elora-2034-torque-wrench-with-rectangular-intake

Sizes

Waterproof ExStik® II pH/Conductivity Meter

Note :   SINGPLAS does not do certificates for Ph Meters

Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )

• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode

• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F

• Memory stores up to 25 labeled readings

• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio

• RENEW feature alerts user when electrode needs replacement

• Auto power off and low battery indicator

• EC500 meter includes electrode, protective sensor cap, sample cup

with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.

Order Conductivity standards and pH buffers separately

Waterproof ExStik® II pH/Conductivity MeterNote : SINGPLAS does not do certificates for Ph MetersOther 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )Features:• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F• Analog bargraph indicates trends• Memory stores up to 25 labeled readings• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio• RENEW feature alerts user when electrode needs replacement• Auto power off and low battery indicator• Waterproof to IP57• EC500 meter includes electrode, protective sensor cap, sample cupwith cap, four 3V CR-2032 batteries, and 48&quot; (1.2m) neckstrap.Order Conductivity standards and pH buffers separately<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<ins>Waterproof ExStik® II pH/Conductivity Meter</ins>
<ins>Note : </ins> SINGPLAS does not do certificates for Ph Meters
Other 3rd Party Singapore only can do normal traceable calibration. Under 3rd party lab (Approximately 10 to 12 working days upon confirmation )
<ins>Features:</ins>
• Measures 5 parameters including Conductivity, TDS, Salinity, pH, and Temperature using one electrode
• 9 units of measure: pH, μS/cm, mS/cm, ppm, ppt, mg/L, g/L, °C, °F
• Analog bargraph indicates trends
• Memory stores up to 25 labeled readings
• Adjustable Conductivity to TDS ratio from 0.4 to 1.0; 0.5 fixed Salinity ratio
• RENEW feature alerts user when electrode needs replacement
• Auto power off and low battery indicator
• Waterproof to IP57
• <ins>EC500 meter</ins> includes electrode, protective sensor cap, sample cup
with cap, four 3V CR-2032 batteries, and 48" (1.2m) neckstrap.
Order Conductivity standards and pH buffers separately

 <div class="img-ctnr">
 <amp-img 
 on="tap:5m4as"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/qcX2jcIKPJODYgn41aenaf.jpg"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5m4as" 
 layout="nodisplay"></amp-image-lightbox>

Paul Ang

Werner

STANLEY

MAKITA

BOSCH

Hitachi

KING'S

SHOWY

Hikoki

Other Construction

Ladders & Platforms

Grinders

Drills, Impact Drivers & Wrenches

Plumbing Tools & Equipment

Safety Shoes

Vehicle Accessories

Safety Gloves

PowerFit Industrial Pte Ltd

Exstik® Ii pH/Conductivity Meter - Waterproof

exstik® ii ph/conductivity meter waterproof pengukur ph/konduktivitas tahan air flow ph meters aliran extech kalis extech/艾克泰克 ph/电导率计 防水 流量和ph计 艾克泰克

exstik-ii-ph-conductivity-meter-waterproof

ExStik® II pH/Conductivity Meter - waterproof

ExStik® II pH/Conductivity Meter - waterproof with Calibration Certificate

Options

Coating Thickness Gages for ALL Metal Substrates

The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly.

Ready to measure—no calibration adjustment required for most applications

NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation

NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure

Wear resistant ruby probe tip, for long-lasting calibration

PosiTector interchangeable platform—attach any PosiTector probe to a single gage body

USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software

Certificate of Calibration showing traceability to NIST or PTB included (Long Form)

Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others 

Durable - Ergonomic design, waterproof, dustproof, water-resistant - IP65-rated enclosure

Accurate - Built-in temperature compensation ensures measurement accuracy

Versatility - Selectable display language, auto-rotating display with flip lock, multiple calibration adjustment options

Powerful - Screen Capture, Instant-on, Statistics mode which continually display average, standard deviation, minimum/maximum and number of readings

<h2 class="md-block-header-two">Coating Thickness Gages for ALL Metal Substrates</h2><h3 class="md-block-header-three">The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly.</h3><ul class="md-block-unordered-list-item"><li>Ready to measure—no calibration adjustment required for most applications</li><li>NEW Larger 2.8&quot; impact resistant color touchscreen with redesigned keypad for quick menu navigation</li><li>NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure</li><li>Wear resistant ruby probe tip, for long-lasting calibration</li><li>PosiTector interchangeable platform—attach any PosiTector probe to a single gage body</li><li>USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software</li><li>Certificate of Calibration showing traceability to NIST or PTB included (Long Form)</li></ul>Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others <h3 class="md-block-header-three"> Features</h3><ul class="md-block-unordered-list-item"><li>Simple - Fast measurement speed</li><li>Durable - Ergonomic design, waterproof, dustproof, water-resistant - IP65-rated enclosure</li><li>Accurate - Built-in temperature compensation ensures measurement accuracy</li><li>Versatility - Selectable display language, auto-rotating display with flip lock, multiple calibration adjustment options</li><li>Powerful - Screen Capture, Instant-on, Statistics mode which continually display average, standard deviation, minimum/maximum and number of readings</li></ul>

&nbsp;
<h2>Coating Thickness Gages for ALL Metal Substrates</h2>
<h3>The rugged, fully electronic PosiTector 6000 Paint Thickness Gage uses magnetic and eddy current principles to measure paint thickness on both ferrous and non-ferrous metals, accurately and quickly.</h3>
<ul>
<li>Ready to measure—no calibration adjustment required for most applications</li>
<li>NEW Larger 2.8" impact resistant color touchscreen with redesigned keypad for quick menu navigation</li>
<li>NEW Weatherproof, dustproof, and water-resistant—IP65-rated enclosure</li>
<li>Wear resistant ruby probe tip, for long-lasting calibration</li>
<li>PosiTector interchangeable platform—attach any PosiTector probe to a single gage body</li>
<li>USB, WiFi, and Bluetooth connectivity to PosiSoft PC, Mac, and Smartphone software</li>
<li>Certificate of Calibration showing traceability to NIST or PTB included (Long Form)</li>
</ul>
Conforms to ISO 2178/2360/2808, ISO 19840, ASTM B244/B499/D1186/D1400/D7091/E376/G12, BS3900-C5, SSPC-PA2, US Navy NAVSEA PPI 63101-000, US Navy NAVSEA 009-32, AS 2331.1.4, AS3894.3-B, and others&nbsp;

<h3>&nbsp;Features</h3>
<ul>
<li>Simple - Fast measurement speed</li>
<li>Durable - Ergonomic design, waterproof, dustproof, water-resistant - IP65-rated enclosure</li>
<li>Accurate - Built-in temperature compensation ensures measurement accuracy</li>
<li>Versatility - Selectable display language, auto-rotating display with flip lock, multiple calibration adjustment options</li>
<li>Powerful - Screen Capture, Instant-on, Statistics mode which continually display average, standard deviation, minimum/maximum and number of readings</li>
</ul>