Electricals

electricals

Monitoring Relays

monitoring-relays

Catalog Description:CM-PVS.41S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x300-500VAC

Long Description:The CM-PVS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.41S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.

0 s or 0.1 ... 30 s tripping delay (ON or OFF)

Rated Control Supply Voltage (Us):(L-L) 300 ... 500 V AC

Rated Frequency (f):Supply Circuit 50/60 Hz

Rated Operational Current AC-12 (Ie):(230 V) 4 A

Rated Operational Current AC-15 (Ie):(230 V) 3 A

Rated Operational Current DC-12 (Ie):(24 V) 4 A

Rated Operational Current DC-13 (Ie):(24 V) 2 A

Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV

Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V

Output Circuit 1 / Output Circuit 2 300 V

Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A

Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²

Flexible with Ferrule 2x 0.5 ... 1.5 mm²

Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²

Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²

Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715

TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb CM-PVS.41S Relay Monitoring 3PHASE</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PVS.41S</li><li>Product ID:1SVR730794R3300</li><li>EAN:4016779851848</li><li>Catalog Description:CM-PVS.41S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x300-500VAC</li><li>Long Description:The CM-PVS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.41S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.</li><li>Unit of Measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Over- and undervoltage monitoring</li><li>Measuring Range:(L-L) 300 ... 500 V AC</li><li>Time Range:200 ms start-up delay</li><li>0 s or 0.1 ... 30 s tripping delay (ON or OFF)</li><li>Rated Control Supply Voltage (Us):(L-L) 300 ... 500 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screw Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 1x 0.5 ... 2.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 1x 0.5 ... 4 mm²</li><li>Rigid 2x 0.5 ... 2.5 mm²</li><li>Tightening Torque:0.6 ... 0.8 N·m</li><li>Wire Stripping Length:8 mm</li><li>Recommended Screw Driver:0.8 x 4</li><li>4.5</li><li>Pozidriv 1</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3><strong>Abb CM-PVS.41S Relay Monitoring 3PHASE</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:CM-PVS.41S</li>
<li>Product ID:1SVR730794R3300</li>
<li>EAN:4016779851848</li>
<li>Catalog Description:CM-PVS.41S Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x300-500VAC</li>
<li>Long Description:The CM-PVS.41S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 300-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PVS.41S monitors the phase parameters over/undervoltage and phase failure. The corresponding threshold values are adjustable. Phase sequence monitoring as well as an ON or OFF tripping delay are selectable. The tripping delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers screw connection technology with double-chamber cage connection terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Over- and undervoltage monitoring</li>
<li>Measuring Range:(L-L) 300 ... 500 V AC</li>
<li>Time Range:200 ms start-up delay</li>
<li>0 s or 0.1 ... 30 s tripping delay (ON or OFF)</li>
<li>Rated Control Supply Voltage (Us):(L-L) 300 ... 500 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screw Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 1x 0.5 ... 2.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 1x 0.5 ... 4 mm²</li>
<li>Rigid 2x 0.5 ... 2.5 mm²</li>
<li>Tightening Torque:0.6 ... 0.8 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Recommended Screw Driver:0.8 x 4</li>
<li>4.5</li>
<li>Pozidriv 1</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>


Jimmy Foo

SCHNEIDER ELECTRIC

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Circuit Breaker

Fuses & Fusegear

Plugs & Connector 

Light Bulbs

Led Lights

Contactors

Junction & Enclosure Box

Other Electrical Accessories

Light Tubes

Doreen Tan

buyerIntroduction

Abb CM-PVS.41S Relay Monitoring 3PHASE

abb cm-pvs.41s relay monitoring 3phase pemantauan relai relays geganti 3fasa 继电器监控三相 监控继电器

abb-cm-pvs-41s-relay-monitoring-3phase

Abb CM-PAS.31P Relay Monitoring 3PHASE 3X160-300VAC

Catalog Description:CM-PAS.31P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC

Long Description:The CM-PAS.31P relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.31P monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.

Rated Control Supply Voltage (Us):(L-L) 160 ... 300 V AC

Connecting Capacity:Flexible with Ferrule 2x 0.5 ... 1.5 mm²

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb CM-PAS.31P Relay Monitoring 3PHASE 3X160-300VAC</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PAS.31P</li><li>Product ID:1SVR740774R1300</li><li>EAN:4016779851978</li><li>Catalog Description:CM-PAS.31P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC</li><li>Long Description:The CM-PAS.31P relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.31P monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.</li><li>Unit of Measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Phase unbalance detection</li><li>Measuring Range:(L-L) 160 ... 300 V AC</li><li>Time Range:200 ms start-up delay</li><li>0 s or 0.1 ... 30 s tripping delay (ON)</li><li>Rated Control Supply Voltage (Us):(L-L) 160 ... 300 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screwless Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 2x 0.5 ... 1.5 mm²</li><li>Wire Stripping Length:8 mm</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3><strong>Abb CM-PAS.31P Relay Monitoring 3PHASE 3X160-300VAC</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:CM-PAS.31P</li>
<li>Product ID:1SVR740774R1300</li>
<li>EAN:4016779851978</li>
<li>Catalog Description:CM-PAS.31P Three-phase monitoring relay 2c/o, 0,0.1-30s, L1-L2-L3=3x160-300VAC</li>
<li>Long Description:The CM-PAS.31P relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 160-300 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PAS.31P monitors the phase parameters phase failure, phase sequence and phase unbalance. An ON-delay is adjustable over a range of instantaneous to 30 s (0, 0.1-30 s). A sealable transparent cover for protection against unauthorized changes is available as accessory. The device offers maintenance free Easy Connect Technology with push-in terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Phase unbalance detection</li>
<li>Measuring Range:(L-L) 160 ... 300 V AC</li>
<li>Time Range:200 ms start-up delay</li>
<li>0 s or 0.1 ... 30 s tripping delay (ON)</li>
<li>Rated Control Supply Voltage (Us):(L-L) 160 ... 300 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screwless Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 2x 0.5 ... 1.5 mm²</li>
<li>Wire Stripping Length:8 mm</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>


Pilot Lights

abb cm-pas.31p relay monitoring 3phase 3x160-300vac pemantauan relai relays geganti 3fasa 继电器监控三相 监控继电器

abb-cm-pas-31p-relay-monitoring-3phase-3x160-300vac

The RD3 series of electronic residual current relays provides residual current protection and monitoring functions. This device can be used in conjunction with all MCBs of S200 series and Tmax range moulded case devices up to T5, for industrial installations.


Rated Operational Voltage:230 ... 400 V AC

Rated Control Supply Voltage (Us):(50 Hz) 400...400 V

Current Rating:Response value amperage 1 500 ... 500 mA

Delay Time (τ):Delay-On Energization, Maximum, Permitted 10 second [unit of time]

Delay-On Energization, Minimum, Adjustable 0 second [unit of time]

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb RD3 Residual Current Relays</strong></h3><p class="md-block-unstyled"> </p><ul class="md-block-unordered-list-item"><li>The RD3 series of electronic residual current relays provides residual current protection and monitoring functions. This device can be used in conjunction with all MCBs of S200 series and Tmax range moulded case devices up to T5, for industrial installations.<br/></li><li> Product Net Width:52.8 mm</li><li>Product Net Height:0.085 m</li><li>Product Net Depth / Length:65 mm</li><li>Product Net Weight:0.223 kg  </li><li>Unit of measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Standards:IEC EN 60947-2 Ann M</li><li>Type of Residual Current:A type</li><li>Function:For mixed system</li><li>Rated Voltage (Ur):400...400 V</li><li>Rated Operational Voltage:230 ... 400 V AC</li><li>Rated Control Supply Voltage (Us):(50 Hz) 400...400 V</li><li>(60 Hz) 400...400 V</li><li>Current Rating:Response value amperage 1 500 ... 500 mA</li><li>Rated Frequency (f):50 … 60 Hz</li><li>Power Loss:3.6 W</li><li>Number of Contacts:2</li><li>Number of Contacts CO:1</li><li>Number of Contacts NC:0</li><li>Number of Contacts NO:0</li><li>Delay Time (τ):Delay-On Energization, Maximum, Permitted 10 second [unit of time]</li><li>Delay-On Energization, Minimum, Adjustable 0 second [unit of time]</li><li>Mounting Type:DIN-Rail</li><li>Filter Option:no frequency filter</li><li>Options Provided:Pre-alarm threshold: no</li></ul>

<h3><strong>Abb RD3 Residual Current Relays</strong></h3>
<p>&nbsp;</p>
<ul>
<li>The RD3 series of electronic residual current relays provides residual current protection and monitoring functions. This device can be used in conjunction with all MCBs of S200 series and Tmax range moulded case devices up to T5, for industrial installations.<br>
</li>
<li>&nbsp;Product Net Width:52.8 mm</li>
<li>Product Net Height:0.085 m</li>
<li>Product Net Depth / Length:65 mm</li>
<li>Product Net Weight:0.223 kg&nbsp;&nbsp;</li>
<li>Unit of measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Standards:IEC EN 60947-2 Ann M</li>
<li>Type of Residual Current:A type</li>
<li>Function:For mixed system</li>
<li>Rated Voltage (Ur):400...400 V</li>
<li>Rated Operational Voltage:230 ... 400 V AC</li>
<li>Rated Control Supply Voltage (Us):(50 Hz) 400...400 V</li>
<li>(60 Hz) 400...400 V</li>
<li>Current Rating:Response value amperage 1 500 ... 500 mA</li>
<li>Rated Frequency (f):50 … 60 Hz</li>
<li>Power Loss:3.6 W</li>
<li>Number of Contacts:2</li>
<li>Number of Contacts CO:1</li>
<li>Number of Contacts NC:0</li>
<li>Number of Contacts NO:0</li>
<li>Delay Time (τ):Delay-On Energization, Maximum, Permitted 10 second [unit of time]</li>
<li>Delay-On Energization, Minimum, Adjustable 0 second [unit of time]</li>
<li>Mounting Type:DIN-Rail</li>
<li>Filter Option:no frequency filter</li>
<li>Options Provided:Pre-alarm threshold: no</li>
</ul>


Abb RD3 Residual Current Relays

abb rd3 residual current relays relai arus sisa monitoring pemantauan geganti baki 剩余电流继电器 监控继电器

abb-rd3-residual-current-relays

Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz

Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.

Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb CM-PFS.S Relay Monitoring 3PHASE</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:CM-PFS.S</li><li>Product ID:1SVR730824R9300</li><li>EAN:4016779851947</li><li>Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz</li><li>Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.</li><li>Unit of Measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Function:Phase failure detection</li><li>Phase sequence monitoring</li><li>Measuring Range:(L-L) 200 ... 500 V AC</li><li>Time Range:500 ms start-up delay</li><li>Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC</li><li>Rated Frequency (f):Supply Circuit 50/60 Hz</li><li>Output:2 c/o (SPDT) contacts</li><li>Terminal Type:Screw Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Minimum Switching Capacity:24 V</li><li>10 mA</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li><li>Output Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li><li>Output Circuit 1 / Output Circuit 2 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Electrical Durability:AC-12 100000 cycle</li><li>Mechanical Durability:30000000 cycle</li><li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li><li>Flexible 1x 0.5 ... 2.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 1x 0.5 ... 4 mm²</li><li>Rigid 2x 0.5 ... 2.5 mm²</li><li>Tightening Torque:0.6 ... 0.8 N·m</li><li>Wire Stripping Length:8 mm</li><li>Recommended Screw Driver:0.8 x 4</li><li>4.5</li><li>Pozidriv 1</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 60255-27</li><li>IEC/EN 61000-6-2</li><li>IEC/EN 61000-6-3</li><li>UL 508</li></ul>

<h3><strong>Abb CM-PFS.S Relay Monitoring 3PHASE</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:CM-PFS.S</li>
<li>Product ID:1SVR730824R9300</li>
<li>EAN:4016779851947</li>
<li>Catalog Description:CM-PFS.S Three-phase monitoring relay 2c/o, L1-L2-L3=200-500VAC 50/60Hz</li>
<li>Long Description:The CM-PFS.S relay is from the CM three-phase monitors range. This relay operates with a rated control supply voltage / three-phase measuring voltage of 200-500 V AC and has a 2 c/o output with contacts rated at 250 V / 4 A. The CM-PFS.S monitors the phase loss and phase sequence. The corresponding threshold values are fixed. The device offers screw connection technology with double-chamber cage connection terminals.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Function:Phase failure detection</li>
<li>Phase sequence monitoring</li>
<li>Measuring Range:(L-L) 200 ... 500 V AC</li>
<li>Time Range:500 ms start-up delay</li>
<li>Rated Control Supply Voltage (Us):(L-L) 200 ... 500 V AC</li>
<li>Rated Frequency (f):Supply Circuit 50/60 Hz</li>
<li>Output:2 c/o (SPDT) contacts</li>
<li>Terminal Type:Screw Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 4 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 4 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Minimum Switching Capacity:24 V</li>
<li>10 mA</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 6 kV</li>
<li>Output Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 600 V</li>
<li>Output Circuit 1 / Output Circuit 2 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Electrical Durability:AC-12 100000 cycle</li>
<li>Mechanical Durability:30000000 cycle</li>
<li>Connecting Capacity:Flexible with Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.5 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.5 ... 1.5 mm²</li>
<li>Flexible 1x 0.5 ... 2.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 1x 0.5 ... 4 mm²</li>
<li>Rigid 2x 0.5 ... 2.5 mm²</li>
<li>Tightening Torque:0.6 ... 0.8 N·m</li>
<li>Wire Stripping Length:8 mm</li>
<li>Recommended Screw Driver:0.8 x 4</li>
<li>4.5</li>
<li>Pozidriv 1</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 60255-27</li>
<li>IEC/EN 61000-6-2</li>
<li>IEC/EN 61000-6-3</li>
<li>UL 508</li>
</ul>


Abb CM-PFS.S Relay Monitoring 3PHASE

abb cm-pfs.s relay monitoring 3phase pemantauan relai relays geganti 3fasa 继电器监控三相 监控继电器

abb-cm-pfs-s-relay-monitoring-3phase

Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC

Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay

Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.

Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13

Rated Operational Voltage:Auxiliary Circuit 690 V

Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz

Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A

Rated Operational Current AC-15 (Ie):(500 V) 2 A

Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A

Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour

Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W

Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V

Rated Impulse Withstand Voltage (Uimp):6 kV

Maximum Mechanical Switching Frequency:6000 cycles per hour

Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V

Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms

Between Coil De-energization and NO Contact Opening 11 ... 95 ms

Between Coil Energization and NC Contact Opening 38 ... 90 ms

Between Coil Energization and NO Contact Closing 40 ... 95 ms

Mounting by Screws (not supplied):2 x M4 screws placed diagonally

Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²

Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²

Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²

Wire Stripping Length:Auxiliary Circuit 10 mm

Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20

acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:NF22E-13</li><li>Product ID:1SBH137001R1322</li><li>EAN:3471523100138</li><li>Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay</li><li>Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the &quot;Mechanically Linked&quot; symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.</li><li>Unit of Measurement : Pcs</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Number of Auxiliary Contacts NO:2</li><li>Number of Auxiliary Contacts NC:2</li><li>Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13</li><li>Rated Operational Voltage:Auxiliary Circuit 690 V</li><li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li><li>Control Circuit 50 / 60 Hz</li><li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li><li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li><li>(690 V) 2 A</li><li>(24 / 127 V) 6 A</li><li>(220 / 240 V) 4 A</li><li>(400 / 440 V) 3 A</li><li>Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A</li><li>for 1 s 100 A</li><li>Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour</li><li>(DC-13) 900 cycles per hour</li><li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li><li>(48 V) 2.8 A / 134 W</li><li>(72 V) 1 A / 72 W</li><li>(110 V) 0.55 A / 60 W</li><li>(125 V) 0.55 A / 69 W</li><li>(220 V) 0.27 A / 60 W</li><li>(250 V) 0.27 A / 68 W</li><li>(400 V) 0.15 A / 60 W</li><li>(500 V) 0.13 A / 65 W</li><li>(600 V) 0.1 A / 60 W</li><li>Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V</li><li>acc. to UL/CSA 600 V</li><li>Rated Impulse Withstand Voltage (Uimp):6 kV</li><li>Maximum Mechanical Switching Frequency:6000 cycles per hour</li><li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li><li>60 Hz 100 ... 250 V</li><li>DC Operation 100 ... 250 V</li><li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li><li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li><li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li><li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li><li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li><li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li><li>Rigid Solid 1/2x 1 ... 2.5 mm²</li><li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li><li>Wire Stripping Length:Auxiliary Circuit 10 mm</li><li>Control Circuit 10 mm</li><li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li><li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li><li>Terminal Type:Screw Terminals</li></ul>

<h3><strong>Abb NF22E-13 Relay Control 690V 2NO+2NC 6A 100-250V50/60HZ-DC</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:NF22E-13</li>
<li>Product ID:1SBH137001R1322</li>
<li>EAN:3471523100138</li>
<li>Catalog Description:NF22E-13 100-250V50/60HZ-DC Contactor Relay</li>
<li>Long Description:NF contactor relays are used for switching auxiliary and control circuits. NF contactor relays include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. NF contactor relays can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. NF contactor relays have built-in surge protection and do not require additional surge suppressors. - Poles: 4-pole contactor relays (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1 and including the "Mechanically Linked" symbol on the contactor relay side) - Control Circuit: AC or DC operated - Accessories: a wide range of Accessories is available.</li>
<li>Unit of Measurement : Pcs</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Number of Auxiliary Contacts NO:2</li>
<li>Number of Auxiliary Contacts NC:2</li>
<li>Standards:IEC/EN 60947-1, IEC/EN 60947-5-1, UL 508, CSA C22.2 No. 14-13</li>
<li>Rated Operational Voltage:Auxiliary Circuit 690 V</li>
<li>Rated Frequency (f):Auxiliary Circuit 50 / 60 Hz</li>
<li>Control Circuit 50 / 60 Hz</li>
<li>Conventional Free-air Thermal Current (Ith):acc. to IEC 60947-5-1, Θ = 40 °C 16 A</li>
<li>Rated Operational Current AC-15 (Ie):(500 V) 2 A</li>
<li>(690 V) 2 A</li>
<li>(24 / 127 V) 6 A</li>
<li>(220 / 240 V) 4 A</li>
<li>(400 / 440 V) 3 A</li>
<li>Rated Short-time Withstand Current Low Voltage (Icw):for 0.1 s 140 A</li>
<li>for 1 s 100 A</li>
<li>Maximum Electrical Switching Frequency:(AC-15) 1200 cycles per hour</li>
<li>(DC-13) 900 cycles per hour</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 6 A / 144 W</li>
<li>(48 V) 2.8 A / 134 W</li>
<li>(72 V) 1 A / 72 W</li>
<li>(110 V) 0.55 A / 60 W</li>
<li>(125 V) 0.55 A / 69 W</li>
<li>(220 V) 0.27 A / 60 W</li>
<li>(250 V) 0.27 A / 68 W</li>
<li>(400 V) 0.15 A / 60 W</li>
<li>(500 V) 0.13 A / 65 W</li>
<li>(600 V) 0.1 A / 60 W</li>
<li>Rated Insulation Voltage (Ui):acc. to IEC 60947-5-1 690 V</li>
<li>acc. to UL/CSA 600 V</li>
<li>Rated Impulse Withstand Voltage (Uimp):6 kV</li>
<li>Maximum Mechanical Switching Frequency:6000 cycles per hour</li>
<li>Rated Control Circuit Voltage (Uc):50 Hz 100 ... 250 V</li>
<li>60 Hz 100 ... 250 V</li>
<li>DC Operation 100 ... 250 V</li>
<li>Operate Time:Between Coil De-energization and NC Contact Closing 13 ... 98 ms</li>
<li>Between Coil De-energization and NO Contact Opening 11 ... 95 ms</li>
<li>Between Coil Energization and NC Contact Opening 38 ... 90 ms</li>
<li>Between Coil Energization and NO Contact Closing 40 ... 95 ms</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Mounting by Screws (not supplied):2 x M4 screws placed diagonally</li>
<li>Connecting Capacity Auxiliary Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Connecting Capacity Control Circuit:Flexible with Ferrule 1/2x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 1x 0.75 ... 2.5 mm²</li>
<li>Flexible with Insulated Ferrule 2x 0.75 ... 1.5 mm²</li>
<li>Rigid Solid 1/2x 1 ... 2.5 mm²</li>
<li>Rigid Stranded 1/2x 1 ... 2.5 mm²</li>
<li>Wire Stripping Length:Auxiliary Circuit 10 mm</li>
<li>Control Circuit 10 mm</li>
<li>Degree of Protection:acc. to IEC 60529, IEC 60947-1, EN 60529 Auxiliary Terminals IP20</li>
<li>acc. to IEC 60529, IEC 60947-1, EN 60529 Coil Terminals IP20</li>
<li>Terminal Type:Screw Terminals</li>
</ul>


MILWAUKEE TOOL

abb nf22e-13 relay control 690v 2no+2nc 6a 100-250v50/60hz-dc kontrol relai monitoring relays pemantauan kawalan geganti 继电器控制 监控继电器

abb-nf22e-13-relay-control-690v-2no-2nc-6a-100-250v50-60hz-dc

Abb CR-M230AC4L Relay Control 250V 6A 230VAC Led

Catalog Description:CR-M230AC4L Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A, LED

Long Description:The CR-M230AC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.

Function:Pluggable miniature interface relay CR-M

Rated Control Supply Voltage (Us):230 V AC

Rated Operational Current AC-12 (Ie):(230 V) 6 A

Rated Operational Current AC-15 (Ie):(120 V) 1.5 A

Rated Operational Current DC-12 (Ie):(24 V) 6 A

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb CR-M230AC4L Relay Control 250V 6A 230VAC Led</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:CR-M230AC4L</li><li>Product ID:1SVR405613R3100</li><li>EAN:4013614497766</li><li>Catalog Description:CR-M230AC4L Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A, LED</li><li>Long Description:The CR-M230AC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it&#x27;s output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li><li>Unit of Measurement : PCS</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Function:Pluggable miniature interface relay CR-M</li><li>Sub-Function:Relay with built in LED</li><li>Rated Control Supply Voltage (Us):230 V AC</li><li>Rated Operational Voltage:250 V AC</li><li>Rated Frequency (f):50 / 60 Hz</li><li>Output:4 c/o (SPDT) contacts</li><li>Output Signal:250 V / 6 A</li><li>Terminal Type:Flat-Pin Connections</li><li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li><li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li><li>(230 V) 1 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>(250 V) 0.1 A</li><li>Rated Insulation Voltage (Ui):250 V</li><li>Degree of Protection:IP40</li><li>Mounting Position:1</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 61810-1</li><li>UL 508</li></ul>

<h3><strong>Abb CR-M230AC4L Relay Control 250V 6A 230VAC Led</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:CR-M230AC4L</li>
<li>Product ID:1SVR405613R3100</li>
<li>EAN:4013614497766</li>
<li>Catalog Description:CR-M230AC4L Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A, LED</li>
<li>Long Description:The CR-M230AC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li>
<li>Unit of Measurement : PCS</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Function:Pluggable miniature interface relay CR-M</li>
<li>Sub-Function:Relay with built in LED</li>
<li>Rated Control Supply Voltage (Us):230 V AC</li>
<li>Rated Operational Voltage:250 V AC</li>
<li>Rated Frequency (f):50 / 60 Hz</li>
<li>Output:4 c/o (SPDT) contacts</li>
<li>Output Signal:250 V / 6 A</li>
<li>Terminal Type:Flat-Pin Connections</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li>
<li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li>
<li>(230 V) 1 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>(250 V) 0.1 A</li>
<li>Rated Insulation Voltage (Ui):250 V</li>
<li>Degree of Protection:IP40</li>
<li>Mounting Position:1</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 61810-1</li>
<li>UL 508</li>
</ul>


abb cr-m230ac4l relay control 250v 6a 230vac led kontrol relai monitoring relays pemantauan kawalan geganti dipimpin 继电器控制 监控继电器

abb-cr-m230ac4l-relay-control-250v-6a-230vac-led

Abb CR-M230AC4 Relay Pluggable Interface From CR-M 230VAC 4C/O

Catalog Description:CR-M230AC4 Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A

Long Description:The CR-M230AC4 pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb CR-M230AC4 Relay Pluggable Interface From CR-M 230VAC 4C/O</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:CR-M230AC4</li><li>Product ID:1SVR405613R3000</li><li>EAN:4013614497759</li><li>Catalog Description:CR-M230AC4 Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A</li><li>Long Description:The CR-M230AC4 pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it&#x27;s output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li><li>Unit of Measurement : PCS</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Function:Pluggable miniature interface relay CR-M</li><li>Sub-Function:Relay w/o built in LED</li><li>Rated Control Supply Voltage (Us):230 V AC</li><li>Rated Operational Voltage:250 V AC</li><li>Rated Frequency (f):50 / 60 Hz</li><li>Output:4 c/o (SPDT) contacts</li><li>Output Signal:250 V / 6 A</li><li>Terminal Type:Flat-Pin Connections</li><li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li><li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li><li>(230 V) 1 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>(250 V) 0.1 A</li><li>Rated Insulation Voltage (Ui):250 V</li><li>Degree of Protection:IP40</li><li>Mounting Position:1</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 61810-1</li><li>UL 508</li></ul>

<h3><strong>Abb CR-M230AC4 Relay Pluggable Interface From CR-M 230VAC 4C/O</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:CR-M230AC4</li>
<li>Product ID:1SVR405613R3000</li>
<li>EAN:4013614497759</li>
<li>Catalog Description:CR-M230AC4 Pluggable interface relay 4c/o, A1-A2=230VAC, 250V/6A</li>
<li>Long Description:The CR-M230AC4 pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 230 V AC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li>
<li>Unit of Measurement : PCS</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Function:Pluggable miniature interface relay CR-M</li>
<li>Sub-Function:Relay w/o built in LED</li>
<li>Rated Control Supply Voltage (Us):230 V AC</li>
<li>Rated Operational Voltage:250 V AC</li>
<li>Rated Frequency (f):50 / 60 Hz</li>
<li>Output:4 c/o (SPDT) contacts</li>
<li>Output Signal:250 V / 6 A</li>
<li>Terminal Type:Flat-Pin Connections</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li>
<li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li>
<li>(230 V) 1 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>(250 V) 0.1 A</li>
<li>Rated Insulation Voltage (Ui):250 V</li>
<li>Degree of Protection:IP40</li>
<li>Mounting Position:1</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 61810-1</li>
<li>UL 508</li>
</ul>


abb cr-m230ac4 relay pluggable interface cr-m 230vac 4c/o antarmuka dari monitoring relays relai pemantauan antara muka boleh palam geganti daripada 继电器可插拔接口 监控继电器

abb-cr-m230ac4-relay-pluggable-interface-from-cr-m-230vac-4c-o

Abb CR-M024DC4L Relay Control 250V 6A 24VDC Led

Catalog Description:CR-M024DC4L Pluggable interface relay 4c/o, A1-A2=24VDC, 250V/6A, LED

Long Description:The CR-M024DC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 24 V DC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.

Rated Control Supply Voltage (Us):24 V DC

<h3 class="md-block-header-three"><strong class="md-inline-bold">Abb CR-M024DC4L Relay Control 250V 6A 24VDC Led</strong></h3><p class="md-block-unstyled">  </p><ul class="md-block-unordered-list-item"><li>Extended Product Type:CR-M024DC4L</li><li>Product ID:1SVR405613R1100</li><li>EAN:4013614497728</li><li>Catalog Description:CR-M024DC4L Pluggable interface relay 4c/o, A1-A2=24VDC, 250V/6A, LED</li><li>Long Description:The CR-M024DC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 24 V DC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it&#x27;s output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li><li>Unit of Measurement : PCS</li></ul><p class="md-block-unstyled"><strong class="md-inline-bold">Technical</strong></p><ul class="md-block-unordered-list-item"><li>Function:Pluggable miniature interface relay CR-M</li><li>Sub-Function:Relay with built in LED</li><li>Rated Control Supply Voltage (Us):24 V DC</li><li>Rated Operational Voltage:250 V AC</li><li>Output:4 c/o (SPDT) contacts</li><li>Output Signal:250 V / 6 A</li><li>Terminal Type:Flat-Pin Connections</li><li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li><li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li><li>(230 V) 1 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>(250 V) 0.1 A</li><li>Rated Insulation Voltage (Ui):250 V</li><li>Degree of Protection:IP40</li><li>Mounting Position:1</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 61810-1</li><li>UL 508</li></ul>

<h3><strong>Abb CR-M024DC4L Relay Control 250V 6A 24VDC Led</strong></h3>
<p>&nbsp;&nbsp;</p>
<ul>
<li>Extended Product Type:CR-M024DC4L</li>
<li>Product ID:1SVR405613R1100</li>
<li>EAN:4013614497728</li>
<li>Catalog Description:CR-M024DC4L Pluggable interface relay 4c/o, A1-A2=24VDC, 250V/6A, LED</li>
<li>Long Description:The CR-M024DC4L pluggable interface relay is a miniature relay, which is to be plugged into a suitable ABB CR-M socket. Plugged into a socket, the combination of relay and socket may be seemlessly snap-on mounted onto a DIN Rail.This relay operates with a 24 V DC rated control supply voltage and has a 4 c/o (SPDT) output with contacts rated at 250 V / 6A, enabling the possibility of switching multiple circuits with a single input signal. The relay has an integrated test button which is used for the manual actuation of the relay by locking it's output contacts. The test button facilitates easy testing and commissioning. The relay also has an integrated LED, which provides the visual indication of the energization of the relay coil. Standard sockets, logic sockets, pluggable function modules, holders and markers are available as accessories. Standard sockets, logical sockets, pluggable function modules, holder and marker are available as accessories.</li>
<li>Unit of Measurement : PCS</li>
</ul>
<p><strong>Technical</strong></p>
<ul>
<li>Function:Pluggable miniature interface relay CR-M</li>
<li>Sub-Function:Relay with built in LED</li>
<li>Rated Control Supply Voltage (Us):24 V DC</li>
<li>Rated Operational Voltage:250 V AC</li>
<li>Output:4 c/o (SPDT) contacts</li>
<li>Output Signal:250 V / 6 A</li>
<li>Terminal Type:Flat-Pin Connections</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li>
<li>Rated Operational Current AC-15 (Ie):(120 V) 1.5 A</li>
<li>(230 V) 1 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>(250 V) 0.1 A</li>
<li>Rated Insulation Voltage (Ui):250 V</li>
<li>Degree of Protection:IP40</li>
<li>Mounting Position:1</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 61810-1</li>
<li>UL 508</li>
</ul>
