Iwata

RS Pro

Construction

construction

Metal Bars

metal-bars

Mechanical Parts

mechanical-parts

Rubber Seals

rubber-seals

Fasteners

fasteners

Washers

washers

Shim Ring, Inner Diameter 6mm X Outer Diameter 15mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)

Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.

Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.

Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.

Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.

They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.

Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!

Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. 

In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. 

Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.

Product Description: Shim Ring (Also known as Shim Washer)

Manufacturer: Iwata Manufacturing Co., Ltd

Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel

<h3 class="md-block-header-three"><strong class="md-inline-bold">Shim Ring, Inner Diameter 6mm X Outer Diameter 15mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3><p class="md-block-unstyled"><strong class="md-inline-bold">Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p><p class="md-block-unstyled"><strong class="md-inline-bold">Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p><p class="md-block-unstyled">Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p><p class="md-block-unstyled">Purpose And Usage</p><p class="md-block-unstyled">They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p><p class="md-block-unstyled">Tolerances</p><p class="md-block-unstyled">Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p><p class="md-block-unstyled">Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p><p class="md-block-unstyled">In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p><p class="md-block-unstyled">Available Thickness</p><p class="md-block-unstyled">Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p><p class="md-block-unstyled">Product Description: Shim Ring (Also known as Shim Washer)</p><p class="md-block-unstyled">Manufacturer: Iwata Manufacturing Co., Ltd</p><p class="md-block-unstyled">Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p><p class="md-block-unstyled">ID: 6mm</p><p class="md-block-unstyled">OD: 15mm</p><p class="md-block-unstyled">Thickness: 0.01mm to 1mm.</p><p class="md-block-unstyled">Quantity Per Package: 10 pcs</p><p class="md-block-unstyled">Country of Origin: Japan</p>

<h3><strong>Shim Ring, Inner Diameter 6mm X Outer Diameter 15mm, Pack of 10 (Available in Brass, Carbon Steel and 304 Stainless Steel)</strong></h3>
<p><strong>Shim Rings, also known as Shim Washers, are available in various thickness to align gaps and uneven surfaces. Shim washers look similar to flat washers, but are different in their usage and purpose.</strong></p>
<p><strong>Produced in Japan, these are made to extremely precise tolerances and are free from burrs. We are able to offer shim washers in different materials such as Brass, Carbon Steel (SPCC) and 304 stainless steel.</strong></p>
<p><strong>Use them for screws, axles, bearing faces and machine bases. Depending on the material, thickness variants range from 0.01mm to 1mm. Each package contains 10 pcs of the same thickness in the above given inner diameter and outer diameter sizes.</strong></p>
<p>Shim washers and flat washers are inherently different in their purpose and tolerances. Here are three differences that set shim washers apart from flat washers.</p>
<p>Purpose And Usage</p>
<p>They serve a different purpose in life. While flat washers are used for fastening, load distribution and surface protection, shim washers are used for gap alignment. Flat washers are usually used together with screws, bolts or nuts. While shim washers can be used in the same way, they can be slotted into threaded screws or axles to carry out their job.</p>
<p>Tolerances</p>
<p>Based on DIN125A standard, flat washers are produced with nominal dimensions with no tolerance values given. Our flat washers are supplied with the understanding that the thickness variance will range from 0 to 0.2mm. For example, an M3 flat washer will have thickness ranging from 0.4mm to 0.6mm, even in the same batch!</p>
<p>Shim washers are produced to close tolerances, usually up to 0.2mm for ID and OD, and as small as +/-0.02mm for thickness. </p>
<p>In short, shim washers are more precise than flat washers because they have to be. During gap alignment or leveling, minor differences in thickness and diameters must be taken into account for fear of misalignment. </p>
<p>Available Thickness</p>
<p>Flat washers usually have a single thickness based on a given ID and OD. For example, an M3 flat washer with ID 3.2mm and OD 6mm will have thickness 0.4mm. If you are lucky (or not), you might find some with 0.5mm in the same batch. Not reassuring? Not to worry, being used for fastening, the thickness of flat washers is usually not a focal point.</p>
<p>Product Description: Shim Ring (Also known as Shim Washer)</p>
<p>Manufacturer: Iwata Manufacturing Co., Ltd</p>
<p>Materials: Carbon Steel (SPCC), Brass and 304 Stainless Steel</p>
<p>ID: 6mm</p>
<p>OD: 15mm</p>
<p>Thickness: 0.01mm to 1mm.</p>
<p>Quantity Per Package: 10 pcs</p>
<p>Country of Origin: Japan</p>


Precision Brand

Ergomat

Southco

Others

DYMON

SCRUBS

IT Accessories

Machinery Accessories

Screw

Ball Bearings

Painting Tools

Hooks & Eyes

Drill Bits & Drill Bit Sets

Other Tools

Hose Clamp

Leland

buyerIntroduction

Iwata Shim Ring, Inner Diameter 6mm X Outer Diameter 15mm, Pack of 10

iwata shim ring, inner diameter 6mm outer 15mm, pack 10 cincin iwata, dalam luar kemasan buah washers pek iwata/岩田 垫片环，内径 外径 15mm，10 个一包 岩田

iwata-shim-ring-inner-diameter-6mm-x-outer-diameter-15mm-pack-of-10

Carbon Steel ID 6mm x OD 15mm x 0.10mm PN RF006015010, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 15mm x 0.15mm PN RF006015015, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 15mm x 0.20mm PN RF006015020, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 15mm x 0.30mm PN RF006015030, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 15mm x 0.50mm PN RF006015050, Pack of 10 Pieces

Carbon Steel ID 6mm x OD 15mm x 1mm PN RF006015100, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 0.05mm PN RB006015005, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 0.10mm PN RB006015010, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 0.15mm PN RB006015015, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 0.20mm PN RB006015020, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 0.30mm PN RB006015030, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 0.50mm PN RB006015050, Pack of 10 Pieces

Brass ID 6mm x OD 15mm x 1mm PN RB006015100, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.01mm PN RS006015001, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.02mm PN RS006015002, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.03mm PN RS006015003, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.05mm PN RS006015005, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.10mm PN RS006015010, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.15mm PN RS006015015, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.20mm PN RS006015020, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.30mm PN RS006015030, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 0.50mm PN RS006015050, Pack of 10 Pieces

304 SST ID 6mm x OD 15mm x 1mm PN RS006015100, Pack of 10 Pieces

Material

Iwata C Type Molded Seal for 1.6mm Plate Thickness with 15.9mm Tube TSGB160C

Trim Seals (Molded) For Plate Thickness 1.6 mm. Thermoplastic Elastomer with Aluminium A5052 core.

Trim and cushioned tube are integrally molded, there is no risk of peeling

Excellent oil resistance, ideal for machine tool doors, etc

Use adhesive Can be installed simply by pushing in

Aluminium mandrel provides high grip, light weight and excellent corrosion resistance

Corresponding Plate Thickness: 1.2 to 1.6 mm

<h3 class="md-block-header-three">Iwata C Type Molded Seal for 1.6mm Plate Thickness with 15.9mm Tube TSGB160C</h3><p class="md-block-unstyled">Trim Seals (Molded) For Plate Thickness 1.6 mm. Thermoplastic Elastomer with Aluminium A5052 core.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trim seal for plate thickness of 1.6 mm</li><li>Trim and cushioned tube are integrally molded, there is no risk of peeling</li><li>Excellent oil resistance, ideal for machine tool doors, etc</li><li>Use adhesive Can be installed simply by pushing in</li><li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Molded Seal</li><li>Basic Plate Thickness: 1.6 mm</li><li>Corresponding Plate Thickness: 1.2 to 1.6 mm</li><li>Type: C</li><li>Colour: Black</li><li>Length: 50 m</li><li>Cored Bar: Aluminium (A5052)</li><li>Material: Oil Resistant TPE</li><li>Pattern: Plain</li></ul>

<h3>Iwata C Type Molded Seal for 1.6mm Plate Thickness with 15.9mm Tube TSGB160C</h3>
<p>Trim Seals (Molded) For Plate Thickness 1.6 mm. Thermoplastic Elastomer with Aluminium A5052 core.</p>
<h3>Features:</h3>
<ul>
<li>Trim seal for plate thickness of 1.6 mm</li>
<li>Trim and cushioned tube are integrally molded, there is no risk of peeling</li>
<li>Excellent oil resistance, ideal for machine tool doors, etc</li>
<li>Use adhesive Can be installed simply by pushing in</li>
<li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Molded Seal</li>
<li>Basic Plate Thickness: 1.6 mm</li>
<li>Corresponding Plate Thickness: 1.2 to 1.6 mm</li>
<li>Type: C</li>
<li>Colour: Black</li>
<li>Length: 50 m</li>
<li>Cored Bar: Aluminium (A5052)</li>
<li>Material: Oil Resistant TPE</li>
<li>Pattern: Plain</li>
</ul>


Leland Tan

Iwata C Type Molded Seal for 1.6mm Plate Thickness With 15.9mm Tube TSGB160C

iwata type molded seal 1.6mm plate thickness 15.9mm tube tsgb160c untuk ketebalan plat dengan tabung rubber seals segel karet moulded tiub pengedap getah iwata/岩田 c型模制密封件，用于1.6mm板厚和15.9mm管tsgb160c 岩田

iwata-c-type-molded-seal-for-1-6mm-plate-thickness-with-15-9mm-tube-tsgb160c

Iwata Edge Trim for 0.4mm Plate Thickness 15m

Edge Trims For Plate Thickness 0.4 mm can be used for plates with thickness ranging from 0.3 to a maximum of 0.8 mm. These are great for extremely thin metal sheets like shims, which might be dangerous should the edges not be protected properly.

Easy installation by simply pushing in without using an adhesive to protect the edge

TPE is friendly material to excellent environment to recycling

Corresponding Plate Thickness: 0.3 to 0.8 mm

Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)

<h3 class="md-block-header-three">Iwata Edge Trim for 0.4mm Plate Thickness 15m</h3><p class="md-block-unstyled">Edge Trims For Plate Thickness 0.4 mm can be used for plates with thickness ranging from 0.3 to a maximum of 0.8 mm. These are great for extremely thin metal sheets like shims, which might be dangerous should the edges not be protected properly.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trimming for plate thickness of 0.4 mm</li><li>Easy installation by simply pushing in without using an adhesive to protect the edge</li><li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li><li>TPE is friendly material to excellent environment to recycling</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Edge Trim</li><li>Basic Plate Thickness: 0.4 mm</li><li>Corresponding Plate Thickness: 0.3 to 0.8 mm</li><li>Series: 62</li><li>Colour: Black</li><li>Pattern: 3</li><li>Length: 15 m</li><li>Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)</li></ul><h3 class="md-block-header-three">Available Material:</h3><ul class="md-block-unordered-list-item"><li>SKU: 62-04-B-3 - PVC</li><li>SKU: 62-04-B-3T - TPE</li></ul><p class="md-block-unstyled"><br/></p>

<h3>Iwata Edge Trim for 0.4mm Plate Thickness 15m</h3>
<p>Edge Trims For Plate Thickness 0.4 mm can be used for plates with thickness ranging from 0.3 to a maximum of 0.8 mm. These are great for extremely thin metal sheets like shims, which might be dangerous should the edges not be protected properly.</p>
<h3>Features:</h3>
<ul>
<li>Trimming for plate thickness of 0.4 mm</li>
<li>Easy installation by simply pushing in without using an adhesive to protect the edge</li>
<li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li>
<li>TPE is friendly material to excellent environment to recycling</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Edge Trim</li>
<li>Basic Plate Thickness: 0.4 mm</li>
<li>Corresponding Plate Thickness: 0.3 to 0.8 mm</li>
<li>Series: 62</li>
<li>Colour: Black</li>
<li>Pattern: 3</li>
<li>Length: 15 m</li>
<li>Cored Bar: TPE - Aluminium (A5052)/PVC - Aluminium (A3004)</li>
</ul>
<h3>Available Material:</h3>
<ul>
<li>SKU: 62-04-B-3 - PVC</li>
<li>SKU: 62-04-B-3T - TPE</li>
</ul>
<p></p>


iwata edge trim 0.4mm plate thickness 15m untuk ketebalan plat rubber seals segel karet tepi pengedap getah iwata/岩田 边缘饰板0.4mm板厚15m 岩田

iwata-edge-trim-for-0-4mm-plate-thickness-15m

62-04-B-3 - PVC

62-04-B-3T - TPE

Iwata 750 Series Edge Trim for 0.8mm Plate Thickness 15m 750-08-B-2

Edge Trims For Plate Thickness 0.8 mm can be used for plates with thickness ranging from 0.7 to a maximum of 1.6 mm. These are great for extremely thin metal sheets like door panels, which might be dangerous should the edges not be protected properly.

Corresponding Plate Thickness: 0.4 to 1.6 mm

<h3 class="md-block-header-three">Iwata 750 Series Edge Trim for 0.8mm Plate Thickness 15m 750-08-B-2</h3><p class="md-block-unstyled">Edge Trims For Plate Thickness 0.8 mm can be used for plates with thickness ranging from 0.7 to a maximum of 1.6 mm. These are great for extremely thin metal sheets like door panels, which might be dangerous should the edges not be protected properly.</p><h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Trimming for plate thickness of 0.8 mm</li><li>Easy installation by simply pushing in without using an adhesive to protect the edge</li><li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Iwata</li><li>Product Type: Edge Trim</li><li>Basic Plate Thickness: 0.8 mm</li><li>Corresponding Plate Thickness: 0.4 to 1.6 mm</li><li>Series: 750</li><li>Colour: Black</li><li>Pattern: 2</li><li>Length: 15 m</li><li>Cored Bar: Aluminium (A3004)</li><li>Material: PVC</li></ul>

<h3>Iwata 750 Series Edge Trim for 0.8mm Plate Thickness 15m 750-08-B-2</h3>
<p>Edge Trims For Plate Thickness 0.8 mm can be used for plates with thickness ranging from 0.7 to a maximum of 1.6 mm. These are great for extremely thin metal sheets like door panels, which might be dangerous should the edges not be protected properly.</p>
<h3>Features:</h3>
<ul>
<li>Trimming for plate thickness of 0.8 mm</li>
<li>Easy installation by simply pushing in without using an adhesive to protect the edge</li>
<li>Aluminium mandrel provides high grip, light weight and excellent corrosion resistance</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Iwata</li>
<li>Product Type: Edge Trim</li>
<li>Basic Plate Thickness: 0.8 mm</li>
<li>Corresponding Plate Thickness: 0.4 to 1.6 mm</li>
<li>Series: 750</li>
<li>Colour: Black</li>
<li>Pattern: 2</li>
<li>Length: 15 m</li>
<li>Cored Bar: Aluminium (A3004)</li>
<li>Material: PVC</li>
</ul>


iwata 750 series edge trim 0.8mm plate thickness 15m 750-08-b-2 untuk ketebalan plat rubber seals segel karet tepi seri pengedap getah iwata/岩田 750系列修边器，用于0.8mm板厚15m 岩田

iwata-750-series-edge-trim-for-0-8mm-plate-thickness-15m-750-08-b-2

Datasheet

Siemens

STANLEY

ECLIPSE TOOLS

Contitech

Facom

PEGLER YORKSHIRE

MEAN WELL

Omron

O Ring

Plugs & Connector 

Surface Mount Resistors

Bolts

Panel Mount Indicators 

Button Switch

Electrical Wire 

Aluminium Capacitors

Air Filters

RS Components ETH SG

Rs Pro 684333 Copper Flat Bar, 15mm W, 6mm H, 1m L (1 Lot of 4)

rs pro 684333 copper flat bar, 15mm w, 6mm h, 1m (1 lot 4) batangan tembaga datar, isi metal bars daripada pro/rs专业版 铜扁条，15mm 宽，6mm 高，1m 长（1 件） rs专业版

rs-pro-684333-copper-flat-bar-15mm-w-6mm-h-1m-l-1-lot-of-4

RS PRO Datasheet

CEJN

Vent-Axia

Rs Pro 2299692 Nitrile Rubber Seal, 6mm Id, 15mm Od, 4mm (1 Bag of 5)

rs pro 2299692 nitrile rubber seal, 6mm id, 15mm od, 4mm (1 bag 5) segel karet nitril, id 6mm, od 15mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 6mm，外径 15mm，4mm（1 个） rs专业版

rs-pro-2299692-nitrile-rubber-seal-6mm-id-15mm-od-4mm-1-bag-of-5

Rs Pro 2270517 Nitrile Rubber Seal, 15mm Id, 25mm Od, 6mm (1 Bag of 5)

rs pro 2270517 nitrile rubber seal, 15mm id, 25mm od, 6mm (1 bag 5) segel karet nitril, id 15mm, od 25mm, kantong isi seals pengedap getah beg 丁腈橡胶密封件，内径 15mm，外径 25mm，6mm（1 个） rs专业版