Murr Elektronik

PR Electronics

RS Pro

SCHNEIDER ELECTRIC

Startech

Air Conditioning & Ventilation

air-conditioning-ventilation

Axial Fans

axial-fans

Centrifugal Fans

centrifugal-fans

Electricals

electricals

Contactors

contactors

Control Relays

control-relays

Current Transformers

current-transformers

Impulse Relays

impulse-relays

Lightings

lightings

Indicator Lights

indicator-lights

Monitoring Relays

monitoring-relays

Power Supply

power-supply

Electrical Switches

electrical-switches

RF Switches

rf-switches

Timer Relay 

timer-relay

INPUT: 3× 324...572 V AC / 480...745 V DC

Number of devices parallel connection max.: 3

Number of devices series connection max.: 3

Fuse protection primary side internal: 6.3 A

Input current at input voltage 1 AC: 2.3 A

Input current at input voltage 2 AC: 1.6 A

Efficiency: 93.7 % @ 3× 400 V AC, 93.5 % @ 3× 480 V AC

Mains failure bridging min.: 40 ms @ 3× 500 V AC

Degree of protection (EN IEC 60529): IP20

Suitable for mounting type: Mounting rail TH35, (EN 60715)

Relative humidity max. (operation): 95 % (no condensation)

<h3 class="md-block-header-three">Murr 85693 Emparro Power Supply 3-PHASE</h3>INPUT: 3× 324...572 V AC / 480...745 V DCOUTPUT: 24...28 V DCCurrent: 40 A Electrical data<ul class="md-block-unordered-list-item"><li>Number of devices parallel connection max.: 3</li><li>Number of devices series connection max.: 3</li><li>Parallel connection: Yes</li><li>Series connection: Yes</li><li>Security level: SELV</li></ul>Electrical data | Supply<ul class="md-block-unordered-list-item"><li>Power frequency: 50 ... 60 Hz</li></ul>Electrical data | Input<ul class="md-block-unordered-list-item"><li>Fuse protection primary side internal: 6.3 A</li><li>Characteristic back-up fuse: Inertia</li><li>Input voltage 1 AC: 360 V</li><li>Input voltage 2 AC: 500 V</li><li>Input voltage AC min.: 324 V</li><li>Input voltage AC max.: 572 V</li><li>Input voltage DC min.: 480 V</li><li>Input voltage DC max.: 745 V</li><li>Input current at input voltage 1 AC: 2.3 A</li><li>Input current at input voltage 2 AC: 1.6 A</li><li>Inrush current max.: 14 A @ 500 V</li><li>Phase number input: 3</li><li>Efficiency: 93.7 % @ 3× 400 V AC, 93.5 % @ 3× 480 V AC</li></ul>Electrical data | Output<ul class="md-block-unordered-list-item"><li>Output voltage DC: 24 V</li><li>Output voltage DC min.: 24 V</li><li>Output voltage DC max.: 28 V</li><li>Output voltage adjustable: Yes</li><li>Output current: 48 A</li><li>Duration Power Boost min.: 5 s</li><li>Mains failure bridging min.: 40 ms @ 3× 500 V AC</li><li>Power Boost: 150 %</li><li>Ripple effective max.: 20 mV</li><li>Spikes (s-s) max.: 90 mV</li></ul>Device protection | Electrical<ul class="md-block-unordered-list-item"><li>Degree of protection (EN IEC 60529): IP20</li><li>Overload protection output: Yes</li><li>Short-circuit protection output: Yes</li></ul>Mechanical data | Mounting data<ul class="md-block-unordered-list-item"><li>Mounting method: Geschnappt</li><li>Suitable for mounting type: Mounting rail TH35, (EN 60715)</li><li>Height: 138 mm</li><li>Width: 109 mm</li><li>Depth: 182 mm</li></ul>Environmental characteristics | Climatic<ul class="md-block-unordered-list-item"><li>Operating temperature min.: -40 °C</li><li>Operating temperature max.: 70 °C</li><li>Derating from: 45 °C</li><li>Storage temperature min.: -40 °C</li><li>Storage temperature max.: 85 °C</li><li>Relative humidity min. (operation): 5 %</li><li>Relative humidity max. (operation): 95 % (no condensation)</li></ul>Approvals<ul class="md-block-unordered-list-item"><li>SEMI F47: Compliant</li></ul>Connection types<ul class="md-block-unordered-list-item"><li>Connection type 1 (Alarm / Pro-Diag) </li><ul class="md-block-unordered-list-item"><li>Connection: Spring clamp terminals FK</li><li>Family construction form: Terminal</li><li>Gender: Female</li><li>Color contact carrier: Green</li><li>No. of poles: 4</li><li>PIN 1: 13</li><li>PIN 2: 14</li><li>PIN 3: 23</li><li>PIN 4: 24</li></ul><li>Connection type 2 (Input)</li><ul class="md-block-unordered-list-item"><li>Connection: Spring clamp terminals FK</li><li>Family construction form: Terminal</li><li>Gender: Female</li><li>Color contact carrier: Green</li><li>No. of poles: 4</li><li>PIN 1: PE</li><li>PIN 2: L 1</li><li>PIN 3: L 2</li><li>PIN 4: L 3</li></ul><li>Connection type 3 (Input / Output)</li><ul class="md-block-unordered-list-item"><li>Connection: Spring clamp terminals FK</li><li>Family construction form: Terminal</li><li>Gender: Female</li><li>Color contact carrier: Green</li><li>No. of poles: 4</li><li>PIN 1: -</li><li>PIN 2: -</li><li>PIN 3: +</li><li>PIN 4: +</li></ul></ul>

<h3>Murr 85693 Emparro Power Supply 3-PHASE</h3>
INPUT: 3× 324...572 V AC / 480...745 V DC
OUTPUT: 24...28 V DC
Current: 40 A&nbsp;
Electrical data
<ul>
<li>Number of devices parallel connection max.: 3</li>
<li>Number of devices series connection max.: 3</li>
<li>Parallel connection: Yes</li>
<li>Series connection: Yes</li>
<li>Security level: SELV</li>
</ul>
Electrical data | Supply
<ul>
<li>Power frequency: 50 ... 60 Hz</li>
</ul>
Electrical data | Input
<ul>
<li>Fuse protection primary side internal: 6.3 A</li>
<li>Characteristic back-up fuse: Inertia</li>
<li>Input voltage 1 AC: 360 V</li>
<li>Input voltage 2 AC: 500 V</li>
<li>Input voltage AC min.: 324 V</li>
<li>Input voltage AC max.: 572 V</li>
<li>Input voltage DC min.: 480 V</li>
<li>Input voltage DC max.: 745 V</li>
<li>Input current at input voltage 1 AC: 2.3 A</li>
<li>Input current at input voltage 2 AC: 1.6 A</li>
<li>Inrush current max.: 14 A @ 500 V</li>
<li>Phase number input: 3</li>
<li>Efficiency: 93.7 % @ 3× 400 V AC, 93.5 % @ 3× 480 V AC</li>
</ul>
Electrical data | Output
<ul>
<li>Output voltage DC: 24 V</li>
<li>Output voltage DC min.: 24 V</li>
<li>Output voltage DC max.: 28 V</li>
<li>Output voltage adjustable: Yes</li>
<li>Output current: 48 A</li>
<li>Duration Power Boost min.: 5 s</li>
<li>Mains failure bridging min.: 40 ms @ 3× 500 V AC</li>
<li>Power Boost: 150 %</li>
<li>Ripple effective max.: 20 mV</li>
<li>Spikes (s-s) max.: 90 mV</li>
</ul>
Device protection | Electrical
<ul>
<li>Degree of protection (EN IEC 60529): IP20</li>
<li>Overload protection output: Yes</li>
<li>Short-circuit protection output: Yes</li>
</ul>
Mechanical data | Mounting data
<ul>
<li>Mounting method: Geschnappt</li>
<li>Suitable for mounting type: Mounting rail TH35, (EN 60715)</li>
<li>Height: 138 mm</li>
<li>Width: 109 mm</li>
<li>Depth: 182 mm</li>
</ul>
Environmental characteristics | Climatic
<ul>
<li>Operating temperature min.: -40 °C</li>
<li>Operating temperature max.: 70 °C</li>
<li>Derating from: 45 °C</li>
<li>Storage temperature min.: -40 °C</li>
<li>Storage temperature max.: 85 °C</li>
<li>Relative humidity min. (operation): 5 %</li>
<li>Relative humidity max. (operation): 95 % (no condensation)</li>
</ul>
Approvals
<ul>
<li>SEMI F47: Compliant</li>
</ul>
Connection types
<ul>
<li>Connection type 1 (Alarm / Pro-Diag) 
</li>
<ul>
<li>Connection: Spring clamp terminals FK</li>
<li>Family construction form: Terminal</li>
<li>Gender: Female</li>
<li>Color contact carrier: Green</li>
<li>No. of poles: 4</li>
<li>PIN 1: 13</li>
<li>PIN 2: 14</li>
<li>PIN 3: 23</li>
<li>PIN 4: 24</li>
</ul>
<li>Connection type 2 (Input)</li>
<ul>
<li>Connection: Spring clamp terminals FK</li>
<li>Family construction form: Terminal</li>
<li>Gender: Female</li>
<li>Color contact carrier: Green</li>
<li>No. of poles: 4</li>
<li>PIN 1: PE</li>
<li>PIN 2: L 1</li>
<li>PIN 3: L 2</li>
<li>PIN 4: L 3</li>
</ul>
<li>Connection type 3 (Input / Output)</li>
<ul>
<li>Connection: Spring clamp terminals FK</li>
<li>Family construction form: Terminal</li>
<li>Gender: Female</li>
<li>Color contact carrier: Green</li>
<li>No. of poles: 4</li>
<li>PIN 1: -</li>
<li>PIN 2: -</li>
<li>PIN 3: +</li>
<li>PIN 4: +</li>
</ul>
</ul>

Murr Asia-Pacific Pte. Ltd

Murr Elektronik 85693 Emparro Power Supply 3-PHASE

murr elektronik 85693 emparro power supply 3-phase catu daya 3-fase sumber listrik pembekal kuasa elektronik/穆尔电子 电源 穆尔电子

murr-elektronik-85693-emparro-power-supply-3-phase

Display for digital readout of current / voltage / resistance / temperature or potentiometer signals.

Process control with 2 potential-free relays and / or analog output.

For local readout in extremely wet atmospheres with a specially designed splash-proof cover.

4-digit LED indicator with 13.8 mm 14-segment characters. Max. display readout -1999...9999 with programmable decimal point and relay ON / OFF indication.

All standard operational parameters can be adjusted to any application by way of the front function keys.

Help texts in eight languages can be selected via a menu item.

PR 5714 is available fully-configured according to specifications ready for process control and visualization.

2.3 kVAC galvanic isolation between input, output and supply.

In versions with relay outputs the user can minimize the installation test time by activating / deactivating each relay independently of the input signal.

To be mounted in panel front. The included rubber packing must be mounted between the panel cutout hole and the display front to obtain a protection degree of IP65 (type 4X). For extra protection in extreme environments, PR5714 can be delivered with a specially designed splash-proof cover as accessory.

Operating temperature-20°C to +60°CCalibration temperature20...28°CRelative humidity< 95% RH (non-cond.)Protection degree (mounted in panel)IP65 / Type 4X

Dimensions (HxWxD)48 x 96 x 120 mmCut out dimensions44.5 x 91.5 mmWeight approx.230 gWire size, pin 41-46 (max.)0.05...1.31 mm2 AWG 30...16 stranded wireWire size, others, max.0.05...3.31 mm2 / AWG 30...12 stranded wireVibrationIEC 60068-2-62...13.2 Hz±1 mm13.2...100 Hz±0.7 g

Supply voltage, universal21.6...253 VAC, 50...60 Hz or 19.2...300 VDCMax. required power2.5 W (5714A) 3.0 W (5714B/C)
3.5 W (5714D)
Internal power dissipation2.2 W (5714A) 2.7 W (5714B/C)
3.2 W (5714D)


Isolation voltage, test / working2.3 kVAC / 250 VAC

Temperature input, programmable (0...90%, 100...10%)1...60 smA / V input (programmable)0.4...60 s

2-wire supply (pin 46...45)> 15 VDC @ 0...20 mASignal / noise ratioMin. 60 dB (0...100 kHz)AccuracyBetter than 0.1% of sel. rangeEMC immunity influence< ±0.5% of readout

RTD typePt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100Cable resistance per wire50 Ω (max.)Sensor currentNom. 0.2 mAEffect of sensor cable resistance (3-/4-wire)< 0.002 Ω / Ω

Linear resistance min....max.0 Ω...10000 Ω

Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LRCJC via int. mounted sensor±(2.0°C + 0.4°C * Δt)Sensor error detectionYesSensor error current: When detecting / elseNom. 2 μA / 0 μA

Measurement range0...23 mAProgrammable measurement ranges0...20 and 4...20 mAInput resistanceNom. 20 Ω + PTC 25 ΩSensor error detectionLoop break 4...20 mA

Measurement range0...12 VDCProgrammable measurement ranges0/0.2...1; 0/2...10 VDCInput resistanceNom. 10 MΩ 

Display readout-1999...9999 (4 digits)Decimal pointProgrammableDigit height13.8 mmDisplay updating.2.2 times / sInput outside input range is indicated byExplanatory text

Signal range0...23 mAProgrammable signal ranges0...20/4...20/20...0/20...4 mALoad (@ current output)≤ 800 ΩLoad stability≤ 0.01% of span / 100 ΩSensor error indication0 / 3.5 / 23 mA / noneNAMUR NE43 Upscale/Downscale23 mA / 3.5 mAOutput limitation, on 4...20 and 20...4 mA signals3.8...20.5 mAOutput limitation, on 0...20 and 20...0 mA signals0...20.5 mACurrent limit≤ 28 mA

Relay functionsSetpointHysteresis0...100%ON and OFF delay0...3600 sSensor error reactionBreak / Make / HoldMax. voltage250 VAC / VDCMax. current2 AMax. AC power500 VAMax. DC current, resistive load > 30 VDCSee manual for details

EMC2014/30/EU & UK SI 2016/1091LVD2014/35/EU & UK SI 2016/1101RoHS2011/65/EU & UK SI 2012/3032EACTR-CU 020/2011EAC LVDTR-CU 004/2011

c UL us, UL 508E248256EU RO MR Type ApprovalMRA000000Z 

Application<ul class="md-block-unordered-list-item"><li>Display for digital readout of current / voltage / resistance / temperature or potentiometer signals.</li><li>Process control with 2 potential-free relays and / or analog output.</li><li>For local readout in extremely wet atmospheres with a specially designed splash-proof cover.</li></ul><h3 class="md-block-header-three">Technical characteristics</h3><ul class="md-block-unordered-list-item"><li>4-digit LED indicator with 13.8 mm 14-segment characters. Max. display readout -1999...9999 with programmable decimal point and relay ON / OFF indication.</li><li>All standard operational parameters can be adjusted to any application by way of the front function keys.</li><li>Help texts in eight languages can be selected via a menu item.</li><li>PR 5714 is available fully-configured according to specifications ready for process control and visualization.</li><li>2.3 kVAC galvanic isolation between input, output and supply.</li><li>In versions with relay outputs the user can minimize the installation test time by activating / deactivating each relay independently of the input signal.</li></ul><h3 class="md-block-header-three">Mounting / installation</h3><ul class="md-block-unordered-list-item"><li>To be mounted in panel front. The included rubber packing must be mounted between the panel cutout hole and the display front to obtain a protection degree of IP65 (type 4X). For extra protection in extreme environments, PR5714 can be delivered with a specially designed splash-proof cover as accessory.</li></ul> <h3 class="md-block-header-three">Environmental Conditions</h3>Operating temperature-20°C to +60°CCalibration temperature20...28°CRelative humidity&lt; 95% RH (non-cond.)Protection degree (mounted in panel)IP65 / Type 4X<h3 class="md-block-header-three">Mechanical specifications</h3>Dimensions (HxWxD)48 x 96 x 120 mmCut out dimensions44.5 x 91.5 mmWeight approx.230 gWire size, pin 41-46 (max.)0.05...1.31 mm2 AWG 30...16 stranded wireWire size, others, max.0.05...3.31 mm2 / AWG 30...12 stranded wireVibrationIEC 60068-2-62...13.2 Hz±1 mm13.2...100 Hz±0.7 g<h3 class="md-block-header-three">Common specifications</h3><h4 class="md-block-header-four">Supply</h4>Supply voltage, universal21.6...253 VAC, 50...60 Hz or 19.2...300 VDCMax. required power2.5 W (5714A) 3.0 W (5714B/C) 3.5 W (5714D) Internal power dissipation2.2 W (5714A) 2.7 W (5714B/C) 3.2 W (5714D) <h4 class="md-block-header-four">Isolation voltage</h4>Isolation voltage, test / working2.3 kVAC / 250 VAC<h4 class="md-block-header-four">Response time</h4>Temperature input, programmable (0...90%, 100...10%)1...60 smA / V input (programmable)0.4...60 s<h4 class="md-block-header-four">Auxiliary supplies</h4>2-wire supply (pin 46...45)&gt; 15 VDC @ 0...20 mASignal / noise ratioMin. 60 dB (0...100 kHz)AccuracyBetter than 0.1% of sel. rangeEMC immunity influence&lt; ±0.5% of readout<h3 class="md-block-header-three">Input specifications</h3><h4 class="md-block-header-four">RTD input</h4>RTD typePt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100Cable resistance per wire50 Ω (max.)Sensor currentNom. 0.2 mAEffect of sensor cable resistance (3-/4-wire)&lt; 0.002 Ω / Ω<h4 class="md-block-header-four">Linear resistance input</h4>Linear resistance min....max.0 Ω...10000 Ω<h4 class="md-block-header-four">Potentiometer input</h4>Potentiometer min....max.10 Ω...100 kΩ<h4 class="md-block-header-four">TC input</h4>Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LRCJC via int. mounted sensor±(2.0°C + 0.4°C * Δt)Sensor error detectionYesSensor error current: When detecting / elseNom. 2 μA / 0 μA<h4 class="md-block-header-four">Current input</h4>Measurement range0...23 mAProgrammable measurement ranges0...20 and 4...20 mAInput resistanceNom. 20 Ω + PTC 25 ΩSensor error detectionLoop break 4...20 mA<h4 class="md-block-header-four">Voltage input</h4>Measurement range0...12 VDCProgrammable measurement ranges0/0.2...1; 0/2...10 VDCInput resistanceNom. 10 MΩ <h3 class="md-block-header-three">Output specifications</h3><h4 class="md-block-header-four">Display</h4>Display readout-1999...9999 (4 digits)Decimal pointProgrammableDigit height13.8 mmDisplay updating.2.2 times / sInput outside input range is indicated byExplanatory text<h4 class="md-block-header-four">Current output</h4>Signal range0...23 mAProgrammable signal ranges0...20/4...20/20...0/20...4 mALoad (@ current output)≤ 800 ΩLoad stability≤ 0.01% of span / 100 ΩSensor error indication0 / 3.5 / 23 mA / noneNAMUR NE43 Upscale/Downscale23 mA / 3.5 mAOutput limitation, on 4...20 and 20...4 mA signals3.8...20.5 mAOutput limitation, on 0...20 and 20...0 mA signals0...20.5 mACurrent limit≤ 28 mA<h4 class="md-block-header-four">Relay output</h4>Relay functionsSetpointHysteresis0...100%ON and OFF delay0...3600 sSensor error reactionBreak / Make / HoldMax. voltage250 VAC / VDCMax. current2 AMax. AC power500 VAMax. DC current, resistive load &gt; 30 VDCSee manual for details<h3 class="md-block-header-three">Observed authority requirements</h3>EMC2014/30/EU &amp; UK SI 2016/1091LVD2014/35/EU &amp; UK SI 2016/1101RoHS2011/65/EU &amp; UK SI 2012/3032EACTR-CU 020/2011EAC LVDTR-CU 004/2011<h3 class="md-block-header-three">Approvals</h3>c UL us, UL 508E248256EU RO MR Type ApprovalMRA000000Z

&nbsp;Application
<ul>
<li>Display for digital readout of current / voltage / resistance / temperature or potentiometer signals.</li>
<li>Process control with 2 potential-free relays and / or analog output.</li>
<li>For local readout in extremely wet atmospheres with a specially designed splash-proof cover.</li>
</ul>
<h3>Technical characteristics</h3>
<ul>
<li>4-digit LED indicator with 13.8 mm 14-segment characters. Max. display readout -1999...9999 with programmable decimal point and relay ON / OFF indication.</li>
<li>All standard operational parameters can be adjusted to any application by way of the front function keys.</li>
<li>Help texts in eight languages can be selected via a menu item.</li>
<li>PR 5714 is available fully-configured according to specifications ready for process control and visualization.</li>
<li>2.3 kVAC galvanic isolation between input, output and supply.</li>
<li>In versions with relay outputs the user can minimize the installation test time by activating / deactivating each relay independently of the input signal.</li>
</ul>
<h3>Mounting / installation</h3>
<ul>
<li>To be mounted in panel front. The included rubber packing must be mounted between the panel cutout hole and the display front to obtain a protection degree of IP65 (type 4X). For extra protection in extreme environments, PR5714 can be delivered with a specially designed splash-proof cover as accessory.</li>
</ul>
&nbsp;
<h3>Environmental Conditions</h3>
Operating temperature-20°C to +60°CCalibration temperature20...28°CRelative humidity&lt; 95% RH (non-cond.)Protection degree (mounted in panel)IP65 / Type 4X
<h3>Mechanical specifications</h3>
Dimensions (HxWxD)48 x 96 x 120 mmCut out dimensions44.5 x 91.5 mmWeight approx.230 gWire size, pin 41-46 (max.)0.05...1.31 mm2 AWG 30...16 stranded wireWire size, others, max.0.05...3.31 mm2 / AWG 30...12 stranded wireVibrationIEC 60068-2-62...13.2 Hz±1 mm13.2...100 Hz±0.7 g
<h3>Common specifications</h3>
<h4>Supply</h4>
Supply voltage, universal21.6...253 VAC, 50...60 Hz or 19.2...300 VDCMax. required power2.5 W (5714A) 3.0 W (5714B/C) 
3.5 W (5714D) 
Internal power dissipation2.2 W (5714A) 2.7 W (5714B/C) 
3.2 W (5714D) 

<h4>Isolation voltage</h4>
Isolation voltage, test / working2.3 kVAC / 250 VAC
<h4>Response time</h4>
Temperature input, programmable (0...90%, 100...10%)1...60 smA / V input (programmable)0.4...60 s
<h4>Auxiliary supplies</h4>
2-wire supply (pin 46...45)&gt; 15 VDC @ 0...20 mASignal / noise ratioMin. 60 dB (0...100 kHz)AccuracyBetter than 0.1% of sel. rangeEMC immunity influence&lt; ±0.5% of readout
<h3>Input specifications</h3>
<h4>RTD input</h4>
RTD typePt10/20/50/100/200/250; Pt300/400/500/1000; Ni50/100/120/1000; Cu10/20/50/100Cable resistance per wire50 Ω (max.)Sensor currentNom. 0.2 mAEffect of sensor cable resistance (3-/4-wire)&lt; 0.002 Ω / Ω
<h4>Linear resistance input</h4>
Linear resistance min....max.0 Ω...10000 Ω
<h4>Potentiometer input</h4>
Potentiometer min....max.10 Ω...100 kΩ
<h4>TC input</h4>
Thermocouple typeB, E, J, K, L, N, R, S, T, U, W3, W5, LRCJC via int. mounted sensor±(2.0°C + 0.4°C * Δt)Sensor error detectionYesSensor error current: When detecting / elseNom. 2 μA / 0 μA
<h4>Current input</h4>
Measurement range0...23 mAProgrammable measurement ranges0...20 and 4...20 mAInput resistanceNom. 20 Ω + PTC 25 ΩSensor error detectionLoop break 4...20 mA
<h4>Voltage input</h4>
Measurement range0...12 VDCProgrammable measurement ranges0/0.2...1; 0/2...10 VDCInput resistanceNom. 10 MΩ&nbsp;

<h3>Output specifications</h3>
<h4>Display</h4>
Display readout-1999...9999 (4 digits)Decimal pointProgrammableDigit height13.8 mmDisplay updating.2.2 times / sInput outside input range is indicated byExplanatory text
<h4>Current output</h4>
Signal range0...23 mAProgrammable signal ranges0...20/4...20/20...0/20...4 mALoad (@ current output)≤ 800 ΩLoad stability≤ 0.01% of span / 100 ΩSensor error indication0 / 3.5 / 23 mA / noneNAMUR NE43 Upscale/Downscale23 mA / 3.5 mAOutput limitation, on 4...20 and 20...4 mA signals3.8...20.5 mAOutput limitation, on 0...20 and 20...0 mA signals0...20.5 mACurrent limit≤ 28 mA
<h4>Relay output</h4>
Relay functionsSetpointHysteresis0...100%ON and OFF delay0...3600 sSensor error reactionBreak / Make / HoldMax. voltage250 VAC / VDCMax. current2 AMax. AC power500 VAMax. DC current, resistive load &gt; 30 VDCSee manual for details
<h3>Observed authority requirements</h3>
EMC2014/30/EU &amp; UK SI 2016/1091LVD2014/35/EU &amp; UK SI 2016/1101RoHS2011/65/EU &amp; UK SI 2012/3032EACTR-CU 020/2011EAC LVDTR-CU 004/2011
<h3>Approvals</h3>
c UL us, UL 508E248256EU RO MR Type ApprovalMRA000000Z&nbsp;

PR Programmable Indicator

MITSUBISHI

American Denki

HIOKI

Watanabe

Siemens

Ceramicx&nbsp

PANASONIC

Idec

Programmable Logic Controllers

Plugs & Connector 

Switch Socket Outlet

Other Measuring Tools

Surge Protection Devices

Other Electrical Accessories

Isolators

Power Relay

Multimeters

Heating Elements 

Jordon Kok

buyerIntroduction

Pr Programmable Led Indicator

pr programmable led indicator indikator yang dapat diprogram lights electronics penunjuk boleh aturcara 可编程 指示灯 电子

pr-programmable-led-indicator

SCHNEIDER ELECTRIC Tesys Deca contactor,4P(2NO+2NC),AC-1 <lt/>=440V 80 a 110V Ac 50/60Hz Coil LC1D65008F7

TeSys Deca contactor, 4 poles (2NO+2NC), for non-inductive load applications up to 60A/690V AC-1.  It provides a 48V 50/60Hz AC coil, power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Without build-in auxiliary contacts, side and front mounting auxiliary contact blocks available (to be ordered separately). Compact (85mm width), DIN-rail mounting or screw fixing.                  

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Tesys Deca contactor,4P(2NO+2NC),AC-1 &lt;lt/&gt;=440V 80 a 110V Ac 50/60Hz Coil LC1D65008F7</h3>TeSys Deca contactor, 4 poles (2NO+2NC), for non-inductive load applications up to 60A/690V AC-1. It provides a 48V 50/60Hz AC coil, power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Without build-in auxiliary contacts, side and front mounting auxiliary contact blocks available (to be ordered separately). Compact (85mm width), DIN-rail mounting or screw fixing.

<h3>SCHNEIDER ELECTRIC Tesys Deca contactor,4P(2NO+2NC),AC-1 &lt;lt/&gt;=440V 80 a 110V Ac 50/60Hz Coil LC1D65008F7</h3>
TeSys Deca contactor, 4 poles (2NO+2NC), for non-inductive load applications up to 60A/690V AC-1. It provides a 48V 50/60Hz AC coil, power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Without build-in auxiliary contacts, side and front mounting auxiliary contact blocks available (to be ordered separately). Compact (85mm width), DIN-rail mounting or screw fixing.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

LC1D65008F7

Jimmy Foo

Philips

Thomas & Betts

BRADY

Bussmann

Weidmuller

FUJI

Crouse-Hinds

Fuses & Fusegear

Light Bulbs

Led Lights

Circuit Breaker

Pilot Lights

Junction & Enclosure Box

Doreen Tan

Schneider Electric LC1D65008F7 Contactor, Tesys Deca, 4P(2NO+2NC),AC-1 , <=440V, 80 a 110V Ac 50/60Hz Coil, Screw Clamp Terminal

schneider electric lc1d65008f7 contactor, tesys deca, 4p(2no+2nc),ac-1 <=440v, 80 110v ac 50/60hz coil, screw clamp terminal kontaktor lc1d65008f7, kumparan 50/60hz, penjepit sekrup contactors para kontraktor penyentuh gegelung, pengapit skru penghubung electric/施耐德电气 接触器，tesys deca，4p（2no+2nc），ac-1，<=440v，80 线圈，螺钉夹端子 接触器 施耐德电气

schneider-electric-lc1d65008f7-contactor-tesys-deca-4p-2no-2nc-ac-1-440v-80-a-110v-ac-50-60hz-coil-screw-clamp-terminal

Schneider Electric 50440 Closed Toroid a Type, Vigipact, Vigilohm, MA120, Inner Diameter 120mm, Rated Current 250A

 This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 250A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 120 millimeters and the weight is 0.450kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 60 millimeters. The maximum cross section per phase (R, S, T, N) is 240mm² for a copper conductor.

Product or Component Type: Earth leakage current sensor

Device Application: Equipment monitoring and control

Current Sensor Type: A type closed toroid

[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s

Residual Short-circuit Withstand Current: 85 kA / 0.5 s

[Uimp] Rated Impulse Withstand Voltage: 12 kV

Connections - Terminals: Screw connection 0.22 mm²

Cable Outer Diameter: 60 mm (maximum), 240 mm²

IP Degree of Protection: Connectors: IP20, IP30

Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)

Exposure to damp heat in service: category C2: 48 hours

Ambient Air Temperature for Operation: -35…70 °C

Ambient Air Temperature for Storage: -55…85 °C

<h3 class="md-block-header-three">Schneider Electric 50440 Closed Toroid a Type, Vigipact, Vigilohm, MA120, Inner Diameter 120mm, Rated Current 250A</h3> This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 250A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 120 millimeters and the weight is 0.450kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 60 millimeters. The maximum cross section per phase (R, S, T, N) is 240mm² for a copper conductor.Specifications: <ul class="md-block-unordered-list-item"><li>Range: VigiPacT</li><li>Device Short Name: MA120</li><li>Product or Component Type: Earth leakage current sensor</li><li>Device Application: Equipment monitoring and control</li><li>Range Compatibility:</li><ul class="md-block-unordered-list-item"><li>VigiPacT RH10M, RH10P</li><li>VigiPacT RH21M, RH21P</li><li>VigiPacT RH68M, RH86M, RH86P</li><li>VigiPacT RH99M, RH99P</li><li>VigiPacT RH197M, RH197P</li><li>VigiPacT RHU, RHUs</li><li>VigiPacT RMH</li></ul><li>Current Sensor Type: A type closed toroid</li><li>[Ie] Rated Operational Current: 250 A</li><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Transformer Ratio: 1/1000</li><li>Network Type: AC/DC</li><li>Network Frequency: 45...440 Hz</li><li>[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s</li><li>Residual Short-circuit Withstand Current: 85 kA / 0.5 s</li><li>[Ui] Rated Insulation Voltage: 1000 V</li><li>Overvoltage Category: IV</li><li>[Uimp] Rated Impulse Withstand Voltage: 12 kV</li></ul><li>Mounting Mode:</li><ul class="md-block-unordered-list-item"><li>Fixed (cables)</li><li>Fixed (plain backplate)</li><li>Fixed (profiled sheet metal)</li><li>Fixed (slotted backplate)</li><li>Clip-on (DIN rail)</li></ul><li>Calorific Value: 3.89 MJ</li><li>Connections - Terminals: Screw connection 0.22 mm²</li><li>Dimensions:</li><ul class="md-block-unordered-list-item"><li>Height: 164 mm</li><li>Width: 190 mm</li><li>Depth: 44 mm</li><li>Diameter: 120 mm (inner)</li><li>Cable Outer Diameter: 60 mm (maximum), 240 mm²</li></ul><li>Net Weight: 0.59 kg</li><li>Environment:</li><ul class="md-block-unordered-list-item"><li>IP Degree of Protection: Connectors: IP20, IP30</li><li>Environmental Characteristic:</li><ul class="md-block-unordered-list-item"><li>Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)</li><li>Salt mist: Kb/2</li><li>Exposure to damp heat in service: category C2: 48 hours</li></ul><li>Pollution Degree: Level 3</li><li>Ambient Air Temperature for Operation: -35…70 °C</li><li>Ambient Air Temperature for Storage: -55…85 °C</li></ul><li>Standards: IEC 60947-2</li><li>Product Certifications: CE</li></ul>

<h3>Schneider Electric 50440 Closed Toroid a Type, Vigipact, Vigilohm, MA120, Inner Diameter 120mm, Rated Current 250A</h3>
&nbsp;This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 250A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 120 millimeters and the weight is 0.450kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 60 millimeters. The maximum cross section per phase (R, S, T, N) is 240mm² for a copper conductor.
Specifications:&nbsp;
<ul>
<li>Range: VigiPacT</li>
<li>Device Short Name: MA120</li>
<li>Product or Component Type: Earth leakage current sensor</li>
<li>Device Application: Equipment monitoring and control</li>
<li>Range Compatibility:</li>
<ul>
<li>VigiPacT RH10M, RH10P</li>
<li>VigiPacT RH21M, RH21P</li>
<li>VigiPacT RH68M, RH86M, RH86P</li>
<li>VigiPacT RH99M, RH99P</li>
<li>VigiPacT RH197M, RH197P</li>
<li>VigiPacT RHU, RHUs</li>
<li>VigiPacT RMH</li>
</ul>
<li>Current Sensor Type: A type closed toroid</li>
<li>[Ie] Rated Operational Current: 250 A</li>
<li>Complementary:</li>
<ul>
<li>Transformer Ratio: 1/1000</li>
<li>Network Type: AC/DC</li>
<li>Network Frequency: 45...440 Hz</li>
<li>[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s</li>
<li>Residual Short-circuit Withstand Current: 85 kA / 0.5 s</li>
<li>[Ui] Rated Insulation Voltage: 1000 V</li>
<li>Overvoltage Category: IV</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 12 kV</li>
</ul>
<li>Mounting Mode:</li>
<ul>
<li>Fixed (cables)</li>
<li>Fixed (plain backplate)</li>
<li>Fixed (profiled sheet metal)</li>
<li>Fixed (slotted backplate)</li>
<li>Clip-on (DIN rail)</li>
</ul>
<li>Calorific Value: 3.89 MJ</li>
<li>Connections - Terminals: Screw connection 0.22 mm²</li>
<li>Dimensions:</li>
<ul>
<li>Height: 164 mm</li>
<li>Width: 190 mm</li>
<li>Depth: 44 mm</li>
<li>Diameter: 120 mm (inner)</li>
<li>Cable Outer Diameter: 60 mm (maximum), 240 mm²</li>
</ul>
<li>Net Weight: 0.59 kg</li>
<li>Environment:</li>
<ul>
<li>IP Degree of Protection: Connectors: IP20, IP30</li>
<li>Environmental Characteristic:</li>
<ul>
<li>Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)</li>
<li>Salt mist: Kb/2</li>
<li>Exposure to damp heat in service: category C2: 48 hours</li>
</ul>
<li>Pollution Degree: Level 3</li>
<li>Ambient Air Temperature for Operation: -35…70 °C</li>
<li>Ambient Air Temperature for Storage: -55…85 °C</li>
</ul>
<li>Standards: IEC 60947-2</li>
<li>Product Certifications: CE</li>
</ul>
&nbsp;

Product Datasheet

User guide

Instruction sheet

Catalogue

Environmental disclosure

APC by Schneider Electric

CLIPSAL

Square D

Telemecanique

Light Switches

Miniature Circuit Breakers - MCBs

Uninterruptible Power Supply 

Molded Case Circuit Breakers - MCCBs

EasyPact Circuit Breakers 

Button Switch

Standby battery 

Overload Relays

Schneider

schneider electric 50440 closed toroid type, vigipact, vigilohm, ma120, inner diameter 120mm, rated current 250a tipe tertutup, dalam arus terukur transformers tertutup dalaman nilai electric/施耐德电气 闭合环形线圈 型，vigipact，vigilohm，ma120，内径 120 毫米，额定电流 施耐德电气

schneider-electric-50440-closed-toroid-a-type-vigipact-vigilohm-ma120-inner-diameter-120mm-rated-current-250a

SCHNEIDER ELECTRIC Tesys Deca contactor,4P(2NO+2NC),AC-1 <lt/>=440V 60A,48V Ac 50/60Hz Coil LC1D40008E7

TeSys Deca contactor, 4 poles (2NO+2NC), for non-inductive load applications up to 60A/690V AC-1.  It provides a 48V 50/60Hz AC coil, power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Without build-in auxiliary contacts, side and front mounting auxiliary contact blocks available (to be ordered separately). Compact (85mm width), DIN-rail mounting or screw fixing.                   

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Tesys Deca contactor,4P(2NO+2NC),AC-1 &lt;lt/&gt;=440V 60A,48V Ac 50/60Hz Coil LC1D40008E7</h3>TeSys Deca contactor, 4 poles (2NO+2NC), for non-inductive load applications up to 60A/690V AC-1. It provides a 48V 50/60Hz AC coil, power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Without build-in auxiliary contacts, side and front mounting auxiliary contact blocks available (to be ordered separately). Compact (85mm width), DIN-rail mounting or screw fixing.

<h3>SCHNEIDER ELECTRIC Tesys Deca contactor,4P(2NO+2NC),AC-1 &lt;lt/&gt;=440V 60A,48V Ac 50/60Hz Coil LC1D40008E7</h3>
TeSys Deca contactor, 4 poles (2NO+2NC), for non-inductive load applications up to 60A/690V AC-1. It provides a 48V 50/60Hz AC coil, power connection by screw terminals, control connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Without build-in auxiliary contacts, side and front mounting auxiliary contact blocks available (to be ordered separately). Compact (85mm width), DIN-rail mounting or screw fixing.&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;

LC1D40008E7

Schneider Electric LC1D40008E7 Contactor, Tesys Deca, 4P(2NO+2NC),AC-1 , <=440V, 60A,48V Ac 50/60Hz Coil, Screw Clamp Terminal

schneider electric lc1d40008e7 contactor, tesys deca, 4p(2no+2nc),ac-1 <=440v, 60a,48v ac 50/60hz coil, screw clamp terminal kontaktor lc1d40008e7, kumparan, penjepit sekrup contactors para kontraktor penyentuh gegelung, pengapit skru penghubung electric/施耐德电气 接触器，tesys deca，4p（2no+2nc），ac-1，<=440v，60a，48v 线圈，螺钉夹端子 接触器 施耐德电气

schneider-electric-lc1d40008e7-contactor-tesys-deca-4p-2no-2nc-ac-1-440v-60a-48v-ac-50-60hz-coil-screw-clamp-terminal

SCHNEIDER ELECTRIC Tesys D Contactor - 3P(3 No) - AC-3 - <lt/>= 440 V 40 a - 48 V Ac 50/60 Hz Coil LC1D40AE7

TeSys D contactor, 3 poles (3NO), for motor control applications up to 18A/690V AC-3/3e (7.5kW@400V).  It provides a 380V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing.  Compact (45mm width), DIN-rail mounting or screw fixing.

<h3 class="md-block-header-three">SCHNEIDER ELECTRIC Tesys D Contactor - 3P(3 No) - AC-3 - &lt;lt/&gt;= 440 V 40 a - 48 V Ac 50/60 Hz Coil LC1D40AE7</h3>TeSys D contactor, 3 poles (3NO), for motor control applications up to 18A/690V AC-3/3e (7.5kW@400V). It provides a 380V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Compact (45mm width), DIN-rail mounting or screw fixing.

<h3>SCHNEIDER ELECTRIC Tesys D Contactor - 3P(3 No) - AC-3 - &lt;lt/&gt;= 440 V 40 a - 48 V Ac 50/60 Hz Coil LC1D40AE7</h3>
TeSys D contactor, 3 poles (3NO), for motor control applications up to 18A/690V AC-3/3e (7.5kW@400V). It provides a 380V 50/60Hz AC coil, 1NO+1NC built-in auxiliary contacts (NC mirror certified), connection by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (45mm width), DIN-rail mounting or screw fixing. Compact (45mm width), DIN-rail mounting or screw fixing.

LC1D40AE7

Schneider Electric LC1D40AE7 Contactor, Tesys Deca, 3P(3 No), AC-3/AC-3e, <=400V, 40A, 48V Ac 50/60Hz Coil, Screw Clamp Terminals

schneider electric lc1d40ae7 contactor, tesys deca, 3p(3 no), ac-3/ac-3e, <=400v, 40a, 48v ac 50/60hz coil, screw clamp terminals kontaktor lc1d40ae7, terminal penjepit sekrup contactors para kontraktor penyentuh gegelung, pengapit skru penghubung electric/施耐德电气 接触器，tesys deca，3p（3 号），ac-3/ac-3e，<=400v，40a，48v 交流 线圈，螺钉夹端子 接触器 施耐德电气

schneider-electric-lc1d40ae7-contactor-tesys-deca-3p-3-no-ac-3-ac-3e-400v-40a-48v-ac-50-60hz-coil-screw-clamp-terminals

Schneider Electric 50439 Closed Toroid a Type, Vigipact, Vigilohm, IA80, Inner Diameter 80mm, Rated Current 160A 

This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 160A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 80 millimeters and the weight is 0.420kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 40 millimeters. The maximum cross section per phase (R, S, T, N) is 95mm² for a copper conductor.

Cable Outer Diameter: 40 mm (maximum), 95 mm²

<h3 class="md-block-header-three">Schneider Electric 50439 Closed Toroid a Type, Vigipact, Vigilohm, IA80, Inner Diameter 80mm, Rated Current 160A </h3>This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 160A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 80 millimeters and the weight is 0.420kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 40 millimeters. The maximum cross section per phase (R, S, T, N) is 95mm² for a copper conductor. Specifications: <ul class="md-block-unordered-list-item"><li>Range: VigiPacT</li><li>Device Short Name: IA80</li><li>Product or Component Type: Earth leakage current sensor</li><li>Device Application: Equipment monitoring and control</li><li>Range Compatibility:</li><ul class="md-block-unordered-list-item"><li>VigiPacT RH10M, RH10P</li><li>VigiPacT RH21M, RH21P</li><li>VigiPacT RH68M, RH86M, RH86P</li><li>VigiPacT RH99M, RH99P</li><li>VigiPacT RH197M, RH197P</li><li>VigiPacT RHU, RHUs</li><li>VigiPacT RMH</li></ul><li>Current Sensor Type: A type closed toroid</li><li>[Ie] Rated Operational Current: 160 A</li><li>Complementary:</li><ul class="md-block-unordered-list-item"><li>Transformer Ratio: 1/1000</li><li>Network Type: AC/DC</li><li>Network Frequency: 45...440 Hz</li><li>[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s</li><li>Residual Short-circuit Withstand Current: 85 kA / 0.5 s</li><li>[Ui] Rated Insulation Voltage: 1000 V</li><li>Overvoltage Category: IV</li><li>[Uimp] Rated Impulse Withstand Voltage: 12 kV</li></ul><li>Mounting Mode:</li><ul class="md-block-unordered-list-item"><li>Fixed (cables)</li><li>Fixed (plain backplate)</li><li>Fixed (profiled sheet metal)</li><li>Fixed (slotted backplate)</li><li>Clip-on (DIN rail)</li></ul><li>Calorific Value: 3.19 MJ</li><li>Connections - Terminals: Screw connection 0.22 mm²</li><li>Dimensions:</li><ul class="md-block-unordered-list-item"><li>Height: 122 mm</li><li>Width: 150 mm</li><li>Depth: 44 mm</li><li>Diameter: 80 mm (inner)</li><li>Cable Outer Diameter: 40 mm (maximum), 95 mm²</li></ul><li>Net Weight: 0.42 kg</li><li>Environment:</li><ul class="md-block-unordered-list-item"><li>IP Degree of Protection: Connectors: IP20, IP30</li><li>Environmental Characteristic:</li><ul class="md-block-unordered-list-item"><li>Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)</li><li>Salt mist: Kb/2</li><li>Exposure to damp heat in service: category C2: 48 hours</li></ul><li>Pollution Degree: Level 3</li><li>Ambient Air Temperature for Operation: -35…70 °C</li><li>Ambient Air Temperature for Storage: -55…85 °C</li></ul><li>Standards: IEC 60947-2</li><li>Product Certifications: CE</li></ul>

<h3>Schneider Electric 50439 Closed Toroid a Type, Vigipact, Vigilohm, IA80, Inner Diameter 80mm, Rated Current 160A&nbsp;</h3>
This toroid is dedicated to Vigilohm Insulation Fault locators, and to VigiPacT type A residual current protection and monitoring relays. It allows the monitoring of the injected component from Vigilohm Insulation Monitor, and the measurement of a current rating up to 160A for VigiPacT monitoring and protection relays. The transformer ratio is 1/1000. The inner diameter of the toroid is 80 millimeters and the weight is 0.420kg. The cables must be centered within the toroid and the diameter represented by all these cables should not exceed 40 millimeters. The maximum cross section per phase (R, S, T, N) is 95mm² for a copper conductor.
&nbsp;Specifications:&nbsp;
<ul>
<li>Range: VigiPacT</li>
<li>Device Short Name: IA80</li>
<li>Product or Component Type: Earth leakage current sensor</li>
<li>Device Application: Equipment monitoring and control</li>
<li>Range Compatibility:</li>
<ul>
<li>VigiPacT RH10M, RH10P</li>
<li>VigiPacT RH21M, RH21P</li>
<li>VigiPacT RH68M, RH86M, RH86P</li>
<li>VigiPacT RH99M, RH99P</li>
<li>VigiPacT RH197M, RH197P</li>
<li>VigiPacT RHU, RHUs</li>
<li>VigiPacT RMH</li>
</ul>
<li>Current Sensor Type: A type closed toroid</li>
<li>[Ie] Rated Operational Current: 160 A</li>
<li>Complementary:</li>
<ul>
<li>Transformer Ratio: 1/1000</li>
<li>Network Type: AC/DC</li>
<li>Network Frequency: 45...440 Hz</li>
<li>[Icw] Rated Short-time Withstand Current: 85 kA for 0.5 s</li>
<li>Residual Short-circuit Withstand Current: 85 kA / 0.5 s</li>
<li>[Ui] Rated Insulation Voltage: 1000 V</li>
<li>Overvoltage Category: IV</li>
<li>[Uimp] Rated Impulse Withstand Voltage: 12 kV</li>
</ul>
<li>Mounting Mode:</li>
<ul>
<li>Fixed (cables)</li>
<li>Fixed (plain backplate)</li>
<li>Fixed (profiled sheet metal)</li>
<li>Fixed (slotted backplate)</li>
<li>Clip-on (DIN rail)</li>
</ul>
<li>Calorific Value: 3.19 MJ</li>
<li>Connections - Terminals: Screw connection 0.22 mm²</li>
<li>Dimensions:</li>
<ul>
<li>Height: 122 mm</li>
<li>Width: 150 mm</li>
<li>Depth: 44 mm</li>
<li>Diameter: 80 mm (inner)</li>
<li>Cable Outer Diameter: 40 mm (maximum), 95 mm²</li>
</ul>
<li>Net Weight: 0.42 kg</li>
<li>Environment:</li>
<ul>
<li>IP Degree of Protection: Connectors: IP20, IP30</li>
<li>Environmental Characteristic:</li>
<ul>
<li>Exposure to damp heat not in service: 28 cycles (25...55 °C, RH 95 %)</li>
<li>Salt mist: Kb/2</li>
<li>Exposure to damp heat in service: category C2: 48 hours</li>
</ul>
<li>Pollution Degree: Level 3</li>
<li>Ambient Air Temperature for Operation: -35…70 °C</li>
<li>Ambient Air Temperature for Storage: -55…85 °C</li>
</ul>
<li>Standards: IEC 60947-2</li>
<li>Product Certifications: CE</li>
</ul>

Schneider Electric 50439 Closed Toroid a Type, Vigipact, Vigilohm, IA80, Inner Diameter 80mm, Rated Current 160A

schneider electric 50439 closed toroid type, vigipact, vigilohm, ia80, inner diameter 80mm, rated current 160a tipe tertutup, dalam arus terukur transformers jenis berkadar electric/施耐德电气 闭合环形线圈 型，vigipact，vigilohm，ia80，内径 80 毫米，额定电流 施耐德电气

schneider-electric-50439-closed-toroid-a-type-vigipact-vigilohm-ia80-inner-diameter-80mm-rated-current-160a

Abb CT-MFD.12 Relay Timer Multifunction 1C/O 24-240VAC 24-48VDC

Catalog Description:CT-MFD.12 Time relay, multifunction 1c/o, 24-240VAC 24-48VDC

Long Description:The CT-MFD.12 is a multifunction electronic time relay from the CT-D timer range. It provides 7 timing functions with 7 time ranges from 0.05 s to 100 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 6 A. A control input works with voltage-related (non-floating) triggering.

Rated Control Supply Voltage (Us):24 ... 240 V AC

Rated Operational Voltage:Auxiliary Circuit 250 V

Rated Operational Current AC-12 (Ie):(230 V) 6 A

Rated Operational Current AC-15 (Ie):(230 V) 3 A

Rated Operational Current DC-12 (Ie):(24 V) 6 A

Rated Operational Current DC-13 (Ie):(24 V) 2 A

Rated Impulse Withstand Voltage (Uimp):Input Circuit 4 kV

Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 300 V

Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A

Connecting Capacity:Flexible 1x 0.5 ... 2.5 mm²

<h3 class="md-block-header-three">Abb CT-MFD.12 Relay Timer Multifunction 1C/O 24-240VAC 24-48VDC</h3> <ul class="md-block-unordered-list-item"><li>Extended Product Type:CT-MFD.12</li><li>Product ID:1SVR500020R0000</li><li>EAN:4013614350634</li><li>Catalog Description:CT-MFD.12 Time relay, multifunction 1c/o, 24-240VAC 24-48VDC</li><li>Long Description:The CT-MFD.12 is a multifunction electronic time relay from the CT-D timer range. It provides 7 timing functions with 7 time ranges from 0.05 s to 100 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 6 A. A control input works with voltage-related (non-floating) triggering.</li><li>Unit of Measurement : PCS</li></ul>Technical<ul class="md-block-unordered-list-item"><li>Timer Relay Type:ON-Delay</li><li>OFF-Delay</li><li>Impulse ON</li><li>Impulse OFF</li><li>Flasher Starting with ON</li><li>Flasher Starting with OFF</li><li>Pulse Former</li><li>Time Range:0.05 s ... 100 h</li><li>Rated Control Supply Voltage (Us):24 ... 240 V AC</li><li>24 ... 48 V DC</li><li>Rated Operational Voltage:Auxiliary Circuit 250 V</li><li>Rated Frequency (f):DC</li><li>50 / 60 Hz</li><li>Output:1 c/o (SPDT) contact</li><li>Terminal Type:Screw Terminals</li><li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li><li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li><li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li><li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li><li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 4 kV</li><li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 300 V</li><li>Degree of Protection:Housing IP50</li><li>Terminals IP20</li><li>Overvoltage Category:III</li><li>Pollution Degree:3</li><li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li><li>Output Circuit NO - F Type Fuses 10 A</li><li>Connecting Capacity:Flexible 1x 0.5 ... 2.5 mm²</li><li>Flexible 2x 0.5 ... 1.5 mm²</li><li>Rigid 1x 0.5 ... 4 mm²</li><li>Rigid 2x 0.5 ... 1.5 mm²</li><li>Tightening Torque:0.5 ... 0.8 N·m</li><li>Wire Stripping Length:7 mm</li><li>Recommended Screw Driver:0.8 x 4</li><li>Pozidriv 1</li><li>Mounting Position:1 ... 6</li><li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li><li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li><li>Standards:CAN/CSA C22.2 No.14</li><li>IEC/EN 63000</li><li>IEC/EN 61812-1</li><li>UL 508</li></ul>

<h3>Abb CT-MFD.12 Relay Timer Multifunction 1C/O 24-240VAC 24-48VDC</h3>
&nbsp;&nbsp;
<ul>
<li>Extended Product Type:CT-MFD.12</li>
<li>Product ID:1SVR500020R0000</li>
<li>EAN:4013614350634</li>
<li>Catalog Description:CT-MFD.12 Time relay, multifunction 1c/o, 24-240VAC 24-48VDC</li>
<li>Long Description:The CT-MFD.12 is a multifunction electronic time relay from the CT-D timer range. It provides 7 timing functions with 7 time ranges from 0.05 s to 100 h. This time relay operates with a rated control supply voltage of 24 - 48 V DC / 24 - 240 V AC and has a 1 c/o (SPDT) output rated at 250 V / 6 A. A control input works with voltage-related (non-floating) triggering.</li>
<li>Unit of Measurement : PCS</li>
</ul>
Technical
<ul>
<li>Timer Relay Type:ON-Delay</li>
<li>OFF-Delay</li>
<li>Impulse ON</li>
<li>Impulse OFF</li>
<li>Flasher Starting with ON</li>
<li>Flasher Starting with OFF</li>
<li>Pulse Former</li>
<li>Time Range:0.05 s ... 100 h</li>
<li>Rated Control Supply Voltage (Us):24 ... 240 V AC</li>
<li>24 ... 48 V DC</li>
<li>Rated Operational Voltage:Auxiliary Circuit 250 V</li>
<li>Rated Frequency (f):DC</li>
<li>50 / 60 Hz</li>
<li>Output:1 c/o (SPDT) contact</li>
<li>Terminal Type:Screw Terminals</li>
<li>Rated Operational Current AC-12 (Ie):(230 V) 6 A</li>
<li>Rated Operational Current AC-15 (Ie):(230 V) 3 A</li>
<li>Rated Operational Current DC-12 (Ie):(24 V) 6 A</li>
<li>Rated Operational Current DC-13 (Ie):(24 V) 2 A</li>
<li>Rated Impulse Withstand Voltage (Uimp):Input Circuit 4 kV</li>
<li>Rated Insulation Voltage (Ui):Input Circuit / Output Circuit 300 V</li>
<li>Degree of Protection:Housing IP50</li>
<li>Terminals IP20</li>
<li>Overvoltage Category:III</li>
<li>Pollution Degree:3</li>
<li>Short-Circuit Protective Devices:Output Circuit NC - F Type Fuses 6 A</li>
<li>Output Circuit NO - F Type Fuses 10 A</li>
<li>Connecting Capacity:Flexible 1x 0.5 ... 2.5 mm²</li>
<li>Flexible 2x 0.5 ... 1.5 mm²</li>
<li>Rigid 1x 0.5 ... 4 mm²</li>
<li>Rigid 2x 0.5 ... 1.5 mm²</li>
<li>Tightening Torque:0.5 ... 0.8 N·m</li>
<li>Wire Stripping Length:7 mm</li>
<li>Recommended Screw Driver:0.8 x 4</li>
<li>Pozidriv 1</li>
<li>Mounting Position:1 ... 6</li>
<li>Mounting on DIN Rail:TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715</li>
<li>TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715</li>
<li>Standards:CAN/CSA C22.2 No.14</li>
<li>IEC/EN 63000</li>
<li>IEC/EN 61812-1</li>
<li>UL 508</li>
</ul>