Avenger Safety Footwear

CONDOR

Ironclad

Martor

Permatex

SECFETRONIK

Safety

safety

Cotton Gloves

cotton-gloves

Cutters, Knives & Multitools

cutters-knives-multitools

Cutters

cutters

Knife Blade

knife-blade

Mechanical Parts

mechanical-parts

O Ring

o-ring

Safety Gloves

safety-gloves

Safety Shoes

safety-shoes

Electricals

electricals

Safety Switch

safety-switch

Machinery Lubricants

machinery-lubricants

Sealants

sealants

GLIDES OVER THE MATERIAL. AND RIGHT THROUGH THE MIDDLE. FOR "PUSH" CUTTING.

You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that's not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for "push" cutting.

Before you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company!

It's easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn't be more comfortable.

Whether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade.

The glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time.

Blade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place.

Measurements (L x W x H) 112 x 19 x 84.5 mm

GLIDES OVER THE MATERIAL. AND RIGHT THROUGH THE MIDDLE. FOR &quot;PUSH&quot; CUTTING.You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that&#x27;s not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for &quot;push&quot; cutting.4-CUTTING EDGE BLADEBefore you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company!WORK ERGONOMICALLYIt&#x27;s easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn&#x27;t be more comfortable.CUT CLEANWhether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade.EXTREMELY ROBUSTThe glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time.EASY BLADE CHANGEBlade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place.Order number 437.00Packaging unit 1 on self-service cardMeasurements (L x W x H) 112 x 19 x 84.5 mmWeight product 74 gCutting depth 7.3 mmBasic material PlasticReplacement bladeINDUSTRIAL BLADE NO. 37040

GLIDES OVER THE MATERIAL. AND RIGHT THROUGH THE MIDDLE. FOR "PUSH" CUTTING.
You are looking for a film and foam cutter that effortlessly cuts harder and stronger film? One that's not afraid of stubborn foam? You have found the best possible solution with the SECUMAX OPTICUT. Its Teflon-coated metal foot makes it both extremely abrasion resistant and easy to slide. Glide with jam-less ease through whatever material you want to cut. Ideal for "push" cutting.
4-CUTTING EDGE BLADE
Before you need to change your blade, you have the option of rotating it multiple times. Four times to be precise. In this way, you can get so much more out of your blade. Practical for you, favourable for your company!
WORK ERGONOMICALLY
It's easy to work ergonomically with the SECUMAX OPTICUT. Your fingers will be delighted with the sizable grip, your thumb with the additional curving at the front of the handle. Glide cutting couldn't be more comfortable.
CUT CLEAN
Whether cutting foam or film, the bendable plastic material guide reliably stops material jamming in front of the blade. The guide also protects your fingers from contact with the blade.
EXTREMELY ROBUST
The glide foot, made of Teflon-coated metal, is both durable and robust. The foot and the similarly robust handle are firmly screwed together; you will be sure to enjoy your cutting tool for an extended period of time.
EASY BLADE CHANGE
Blade change is performed using the small, rotating catch found on the cutter side. Swing, press and release the glide foot. The blade is housed within the foot. Replace or rotate the blade before pushing everything back into place.
Order number 437.00
Packaging unit 1 on self-service card
Measurements (L x W x H) 112 x 19 x 84.5 mm
Weight product 74 g
Cutting depth 7.3 mm
Basic material Plastic
Replacement blade
INDUSTRIAL BLADE NO. 37040

Brochure

Chow Soong Wai 

Burrs

Cutter Blades

Art & School Supplies

Chow Soong Wai

buyerIntroduction

Martor Secumax Opticut No. 437 Push Cut Model Safety Cutter Knife Blade

martor secumax opticut no. 437 push cut model safety cutter knife blade dorong potong pisau cutters pemotong keselamatan tolak martor/马托 安全切割刀刀片 切刀 马尔托

martor-secumax-opticut-no-437-push-cut-model-safety-cutter-knife-blade

ATG Maxiflex Elite Safety Glove Cut Level A, Palm Coated

Recommended for use in dry environments revolving around mechanical work.

Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards

Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)

ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.

ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.

ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.

ERGOtech knitting technology improves fingertip sensitivity for dextrous work.

360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.

GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.

Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.

ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.

Soak them in warm water < 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.

<h2 class="md-block-header-two">ATG Maxiflex Elite Safety Glove Cut Level A, Palm Coated</h2><h3 class="md-block-header-three">Application </h3>Recommended for use in dry environments revolving around mechanical work.<h3 class="md-block-header-three">Electrostatic Resistance </h3>Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards<ul class="md-block-unordered-list-item"><li>Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)</li></ul><h3 class="md-block-header-three">Cut Resistant</h3>ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.<h3 class="md-block-header-three">High Dexterity, Comfort and Grip</h3><ul class="md-block-unordered-list-item"><li>ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.</li><li>ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.</li><li>ERGOtech knitting technology improves fingertip sensitivity for dextrous work.</li><li>360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.</li><li>GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.</li></ul><h3 class="md-block-header-three">Cleanliness Guaranteed</h3><ul class="md-block-unordered-list-item"><li>Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.</li><li>ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.</li></ul><h3 class="md-block-header-three">Directions for cleaning</h3><ul class="md-block-unordered-list-item"><li> Soak them in warm water &lt; 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.</li></ul><figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/zXB045X8gIksUxD_j~M5Tp.png" alt="" /><figcaption class="md-block-image-caption"></figcaption></figure>

<h2>ATG Maxiflex Elite Safety Glove Cut Level A, Palm Coated</h2>
<h3>Application </h3>
Recommended for use in dry environments revolving around mechanical work.
<h3>Electrostatic Resistance </h3>
Wearing the ATG MaxiFlex Elite gloves protects you from electrostatic hazards
<ul>
<li>Gloves are designed to not accumulate static electricity and therefore is safe to use in ATEZ zone (Environment with explosive atmosphere)</li>
</ul>
<h3>Cut Resistant</h3>
ATG MaxiFlex Elite 34-774B is of Cut level A. Gloves are designed to protect against light scratches only. Not recommended for protection against blades.
<h3>High Dexterity, Comfort and Grip</h3>
<ul>
<li>ERGOtech enables Maxiflex elite gloves to be 30% thinner than traditional foam nitrile gloves.</li>
<li>ATG gloves are designed based on a hand at resting position. They also come with a liner that reduces hand fatigue and improves comfort.</li>
<li>ERGOtech knitting technology improves fingertip sensitivity for dextrous work.</li>
<li>360° breathability – Micro-Foam coating in glove helps to direct moisture and heat away from skin and maintain optimal hand temperature.</li>
<li>GRIPtech Technology offers an optimized and controlled grip to the user through the glove’s micro-cup finish.</li>
</ul>
<h3>Cleanliness Guaranteed</h3>
<ul>
<li>Certified by Oeko-Tex, ATG gloves are guaranteed to be “Fresh out of the pack” ,SVHC is also not used during the manufacturing process.</li>
<li>ATG gloves are also certified by The Skin Health Alliance to be “Dermatologically Safe”.</li>
</ul>
<h3>Directions for cleaning</h3>
<ul>
<li> Soak them in warm water &lt; 60 degree Celsius alongside with laundry soap or detergent for about 30 minutes. Rinse in cold water afterwards. Repeat wash and rinse should soiling of gloves be heavy.</li>
</ul>

 <div class="img-ctnr">
 <amp-img 
 on="tap:b52oh"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/zXB045X8gIksUxD_j~M5Tp.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="b52oh" 
 layout="nodisplay"></amp-image-lightbox>

brian

WORKSAFE

NEW PIG

Bata Industrials

MASTER LOCK

NEUKING

Workgard

Slice

Padlocks & Lockout Devices

Respiratory Protection

Hazmat

Protective Suits

Safety Goggles

Body Protection

Eileen Soh

Atg Maxiflex Elite Safety Gloves Cut Level A, Palm Coated, Size 7

atg maxiflex elite safety gloves cut level a, palm coated, size sarung tangan ukuran keselamatan potong tahap bersalut palm, saiz 安全手套 a，手掌涂层，尺寸

atg-maxiflex-elite-safety-gloves-cut-level-a-palm-coated-size-7

SECFETRONIK 16mm Illuminated Emergency Stop Button 1NO 1NC Maintained/Latching

Switching Position: Maintained / Latching

Rated Operating Voltage: 12V / 24V / 110V / 220V 

The product has the characteristics of stable performance, low contact resistance, strong insulation, resistance to vibration and shock, etc.; meets IEC60947-5-1, GB14048.5 and other standards.

Snap-Action switching element. Each switching element contains a normally Open and a normally Close. 

Each button can be configured with a maximum of 2 switching elements. Gold plated terminal gives protection against corrosion in harsh environment.


Please refer to the attached data sheets for more information.

SECFETRONIK 16mm Illuminated Emergency Stop Button 1NO 1NC Maintained/LatchingPanel cut-out: Ø 16 mmBezel Dimension: 24 mmShape: Mushroom HeadColour: REDSwitching Position: Maintained / LatchingContact Configuration: 1NO 1NC Lamp Voltage : 24 VRated Operating Voltage: 12V / 24V / 110V / 220V IP Rating: IP65Approval: CE, ROHSDATA:The product has the characteristics of stable performance, low contact resistance, strong insulation, resistance to vibration and shock, etc.; meets IEC60947-5-1, GB14048.5 and other standards.CONSTRUCTION:Snap-Action switching element. Each switching element contains a normally Open and a normally Close. Each button can be configured with a maximum of 2 switching elements. Gold plated terminal gives protection against corrosion in harsh environment. <h3 class="md-block-header-three">Please refer to the attached data sheets for more information.</h3>

&nbsp;&nbsp;
SECFETRONIK 16mm Illuminated Emergency Stop Button 1NO 1NC Maintained/Latching
Panel cut-out: Ø 16 mm
Bezel Dimension: 24 mm
Shape: Mushroom Head
Colour: RED
Switching Position: Maintained / Latching
Contact Configuration: 1NO 1NC&nbsp;
Lamp Voltage : 24 V
Rated Operating Voltage: 12V / 24V / 110V / 220V 
IP Rating: IP65
Approval: CE, ROHS
<ins>DATA:</ins>
The product has the characteristics of stable performance, low contact resistance, strong insulation, resistance to vibration and shock, etc.; meets IEC60947-5-1, GB14048.5 and other standards.
<ins>CONSTRUCTION:</ins>
Snap-Action switching element. Each switching element contains a normally Open and a normally Close.&nbsp;
Each button can be configured with a maximum of 2 switching elements. Gold plated terminal gives protection against corrosion in harsh environment. 

<h3>Please refer to the attached data sheets for more information.</h3>

Mushroom Head Pushbutton Specification

Van Molo

Secfetronik 16mm Illuminated Emergency Stop Button 1NO 1NC Maintained/Latching

secfetronik 16mm illuminated emergency stop button 1no 1nc maintained/latching menyala tombol berhenti darurat dipertahankan / menempel safety switch saklar pengaman butang kecemasan terang diselenggara diikat suis keselamatan 16mm带照明的紧急停止按钮1no 1nc保持/锁定 安全开关

secfetronik-16mm-illuminated-emergency-stop-button-1no-1nc-maintained-latching

Grainger

Condor 6JF97 D0489 Chemical Resistant Glove 15 Mil Sz 8 Pr

condor 6jf97 d0489 chemical resistant glove 15 mil sz pr sarung tangan tahan bahan kimia ukuran safety gloves keselamatan 耐化学手套 安全手套 秃鹰

condor-6jf97-d0489-chemical-resistant-glove-15-mil-sz-8-pr

Ironclad SKC5SN04L Cut-Resistant Gloves 10 L L Pr

ironclad skc5sn04l cut-resistant gloves 10 pr sarung tangan tahan potong cotton besi 防割手套 铁甲

ironclad-skc5sn04l-cut-resistant-gloves-10-l-l-pr

Permatex Sensor-Safe Grey RTV Silicone Gasket Maker 85g 89147

Permatex Sensor-Safe Grey RTV Silicone Gasket Maker is a single component, room temperature, vulcanizing, gasketing compound designed to provide reliable ""formed-in-place"" gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. 

Can be used as a gasket maker or dressing

<h3 class="md-block-header-three">Permatex Sensor-Safe Grey RTV Silicone Gasket Maker 85g 89147</h3>Permatex Sensor-Safe Grey RTV Silicone Gasket Maker is a single component, room temperature, vulcanizing, gasketing compound designed to provide reliable &quot;&quot;formed-in-place&quot;&quot; gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking. <h3 class="md-block-header-three">Features:</h3><ul class="md-block-unordered-list-item"><li>Improved oil resistance</li><li>Sensor-safe, non-corrosive</li><li>Good adhesion and flexibility</li><li>Replaces most cut gaskets</li><li>Can be used as a gasket maker or dressing</li><li>Non-flammable</li><li>Non-toxic</li><li>Low odour </li></ul><h3 class="md-block-header-three">Application:</h3><ul class="md-block-unordered-list-item"><li>Pump housings</li><li>Machine tools</li><li>Compressors</li><li>Gearboxes</li><li>Valve covers</li><li>Oil pans</li><li>Transmission pans</li></ul><h3 class="md-block-header-three">Specification:</h3><ul class="md-block-unordered-list-item"><li>Brand: Permatex</li><li>Product Type: Silicone Gasket Maker</li><li>Colour: Grey</li><li>Packaging Type: Tube</li><li>Weight: 85 g</li></ul>

<h3>Permatex Sensor-Safe Grey RTV Silicone Gasket Maker 85g 89147</h3>
Permatex Sensor-Safe Grey RTV Silicone Gasket Maker is a single component, room temperature, vulcanizing, gasketing compound designed to provide reliable ""formed-in-place"" gaskets for mechanical assemblies. This material cures on exposure to moisture in the air to form a tough, flexible, silicone rubber gasket. The product resists aging, weathering and thermal cycling without hardening, shrinking or cracking.&nbsp;
<h3>Features:</h3>
<ul>
<li>Improved oil resistance</li>
<li>Sensor-safe, non-corrosive</li>
<li>Good adhesion and flexibility</li>
<li>Replaces most cut gaskets</li>
<li>Can be used as a gasket maker or dressing</li>
<li>Non-flammable</li>
<li>Non-toxic</li>
<li>Low odour&nbsp;</li>
</ul>
<h3>Application:</h3>
<ul>
<li>Pump housings</li>
<li>Machine tools</li>
<li>Compressors</li>
<li>Gearboxes</li>
<li>Valve covers</li>
<li>Oil pans</li>
<li>Transmission pans</li>
</ul>
<h3>Specification:</h3>
<ul>
<li>Brand: Permatex</li>
<li>Product Type: Silicone Gasket Maker</li>
<li>Colour: Grey</li>
<li>Packaging Type: Tube</li>
<li>Weight: 85 g</li>
</ul>

Ian Ong

ELORA

WEICON

LOCTITE

METABO

Others

Fujiplus

DEVCON

Molykote

Adhesive Glue

Lubricants

Threadlocker

Degreasers

Anti Rust Coating & Lubricant

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

Permatex Sensor-safe Grey Rtv Silicone Gasket Maker 85g

permatex sensor-safe grey rtv silicone gasket maker 85g sensor-aman sealants sealant gray pengedap permatex传感器安全的灰色rtv硅胶垫片制造商85g 密封胶

permatex-sensor-safe-grey-rtv-silicone-gasket-maker-85g

Silicone O-Rings are sometimes referred to VMQ O-Rings.

Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility. 

In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.

Overview on Application Rating for Material Silicone 

Heat Ozone & Aging Resistance - Excellent

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.

O-Rings and rubber seals are generally used for:

· Applications that require resistance to OIL

· Applications that are required to work in low temperatures (-0°C)

· High performance Fuel systems that requires strictly no leakage

O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.

The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.

If you want to install an O-ring correctly and within a short time, here are steps to follow:

· Covering and lubricating the threading of the shaft

The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.

That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.

You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.

Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.

Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.

For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.

ORING AS568 AS437 ID 151.77 X CS 6.99Material : Silicone 70 Shore Additional InformationSilicone O-Rings are sometimes referred to VMQ O-Rings.Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59&#x60;C to 232&#x60;C) and it has good retention of compression and flexibility. In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.Temperature Range (Dry Heat)Low: -75&#x60;F / -59&#x60;C High: 450&#x60;F / 232&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - FairTear Strength – PoorFuel Resistance - PoorHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - ExcellentAbrasion Resistance - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide <figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/T~mjAmWbLZJ1aawONP6Kxp.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS437
&nbsp;ID 151.77 X CS 6.99
Material : Silicone 70 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Silicone O-Rings are sometimes referred to VMQ O-Rings.
Silicone elastomers are an excellent material due to its outstanding resistance to extreme range of temperature ranging from (-59`C to 232`C) and it has good retention of compression and flexibility.&nbsp;
In addition Silicone perform excellent resistance to ozone, oxygen, moisture and water swell. Last of all, Silicone has and produces very low odour and taste elastomer therefore making it the right material to be used in food and beverage, and medical industry.
<ins>Temperature Range (Dry Heat)</ins>
Low: -75`F / -59`C High: 450`F / 232`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Fair
Tear Strength – Poor
Fuel Resistance - Poor
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Excellent
Abrasion Resistance - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder. Durometer is also generally stated and accepted with a “+/- 5” tolerance. Silicone O-Rings the standard nominal durometer is 70 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>&nbsp;&nbsp;

 <div class="img-ctnr">
 <amp-img 
 on="tap:6mbgn"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/T~mjAmWbLZJ1aawONP6Kxp.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="6mbgn" 
 layout="nodisplay"></amp-image-lightbox>

John

Optibelt

Gates

SAMTECH

VITON

V Rings

Rubber Seals

Oil Seals

Shaft Couplings

Plumbing Tools & Equipment

Ball Bearings

Hydraulic Seals

Wall Plugs, Anchors, Fixings & Kits

Vee-Belts

ORING AS568 AS437 ID 151.77 X CS 6.99 Silicone 70 Shore

oring as568 as437 id 151.77 cs 6.99 silicone 70 shore silikon ring o-ring oem gelang oem/oem代工 6.99硅胶70肖氏 o型圈 oem代工

oring-as568-as437-id-151-77-x-cs-6-99-silicone-70-shore

Blade characteristics 4-cutting edge blade

10 PIECESOrder number 37040.60Packaging unit 10 in transparent packLength *43 mmWidth *22.2 mmMaterial thickness *0.4 mmBasic material SteelGround deep-edged,2-sided ground-edgeBlade facets Double bevel edge-groundBlade characteristics 4-cutting edge blade

&nbsp;10 PIECES
Order number 37040.60
Packaging unit 10 in transparent pack
Length *43 mm
Width *22.2 mm
Material thickness *0.4 mm
Basic material Steel
Ground deep-edged,2-sided ground-edge
Blade facets Double bevel edge-ground
Blade characteristics 4-cutting edge blade

Martor Industrial Blade No. 37040 Safety Cutter Knife Replacement Blade

martor industrial blade no. 37040 safety cutter knife replacement pengganti pisau pemotong martor/马托 工业刀片37040安全切刀更换刀片 马尔托

martor-industrial-blade-no-37040-safety-cutter-knife-replacement-blade

Material :  Viton Fluoroelastomers (FKM) 75 Shore    

Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.

This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).

In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. 

The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.

ORING AS568 AS437 ID 151.77 X CS 6.99Material : Viton Fluoroelastomers (FKM) 75 Shore Additional InformationFluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15&#x60;C to 199&#x60;C).In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings. The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.Temperature Range (Dry Heat)Low: -5&#x60;F / -15&#x60;C High: 390&#x60;F / 199&#x60;COverview on Application Rating for Material Silicone Properties (Rating)Oils &amp; Grease - ExcellentTear Strength – GoodFuel Resistance - GoodHeat Ozone &amp; Aging Resistance - ExcellentWater Swell Resistance - GoodAmmonia, Amines, Alkalis - PoorOther than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/VQ~G42Upip7hMiWlbX~jlI.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS437
&nbsp;ID 151.77 X CS 6.99
Material : Viton Fluoroelastomers (FKM) 75 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Fluorocarbon O-Rings are usually call FKM or VITON elastomer, this elastomer are very close to being the universal material to be used in the sealing industry of O-Ring.
This is because due to it wideranges of chemical resistances and outstanding temperature combined with ozone, UV, weathering, and gasoline resistances. They have a temperature ranging from (-15`C to 199`C).
In addition fluorocarbon elastomer, have great benefit to be used in vacuum sealing due to its low gas impermeability ratings.&nbsp;
The down side of fluorocarbon elastomer is, they should avoid being use in low temperature applications or exposing to hot water, steam, polar solvents, low molecular weight esters and esters, glycol based brake fluids or hot hydrofluoric or chlorosulfonic acids are a factor.
<ins>Temperature Range (Dry Heat)</ins>
Low: -5`F / -15`C High: 390`F / 199`C
<ins>Overview on Application Rating for Material Silicone </ins>
Properties (Rating)
Oils &amp; Grease - Excellent
Tear Strength – Good
Fuel Resistance - Good
Heat Ozone &amp; Aging Resistance - Excellent
Water Swell Resistance - Good
Ammonia, Amines, Alkalis - Poor
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classified as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with “Shore A” scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Fluorocarbon Viton O-Rings the standard nominal durometer is 75 Shore and 90 Shore.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:cfh4k"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/VQ~G42Upip7hMiWlbX~jlI.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="cfh4k" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS437 ID 151.77 X CS 6.99 Viton Fluoroelastomers (FKM) 75 Shore

oring as568 as437 id 151.77 cs 6.99 viton fluoroelastomers (fkm) 75 shore fluoroelastomer ring o-ring oem gelang oem/oem代工 6.99氟橡胶（fkm）75 o型圈 oem代工

oring-as568-as437-id-151-77-x-cs-6-99-viton-fluoroelastomers-fkm-75-shore

Nitrile is often referred to Buna (Buna-N) and NBR.

Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C). 

It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.

However Nitrile are not a restricting factors in many applications.

Overview on Application Rating for Material Nitrile (NBR) 

Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.

ORING AS568 AS437 ID 151.77 X CS 6.99Material : Nitrile (NBR) 70 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/zvMEtgoN7wkvS~R0gnZA1h.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS437
&nbsp;ID 151.77 X CS 6.99
Material : Nitrile (NBR) 70 Shore
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:aa857"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/zvMEtgoN7wkvS~R0gnZA1h.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="aa857" 
 layout="nodisplay"></amp-image-lightbox>

ORING AS568 AS437 ID 151.77 X CS 6.99 Nitrile (NBR) 70 Shore

oring as568 as437 id 151.77 cs 6.99 nitrile (nbr) 70 shore ring o-ring oem gelang oem/oem代工 6.99丁腈（nbr）70邵氏 o型圈 oem代工

oring-as568-as437-id-151-77-x-cs-6-99-nitrile-nbr-70-shore

ORING AS568 AS437 ID 151.77 X CS 6.99Material : Nitrile (NBR) 90 Shore Additional InformationNitrile is often referred to Buna (Buna-N) and NBR.Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30&#x60;C to 100&#x60;C). It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.However Nitrile are not a restricting factors in many applications.Temperature RangeLow : -22&#x60;F / -30&#x60;C High: 212&#x60;F / 100&#x60;COverview on Application Rating for Material Nitrile (NBR) Properties ( Rating )Oils &amp; Grease - GoodTear Strength - GoodFuel Resistance - PoorGas impermeability - GoodCompression - ExcellentAbrasion Resistance - Good Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.Primary UsageO-Rings and rubber seals are generally used for:· Applications that require resistance to OIL· Applications that are required to work in low temperatures (-0°C)· High performance Fuel systems that requires strictly no leakage<ul class="md-block-unordered-list-item"><li>Aircrafts</li><li>Marine Ships</li><li>F1 Cars</li></ul>· General Industrial Use Tips for installation of an O-ringO-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.So how do you install an O-ring?The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.If you want to install an O-ring correctly and within a short time, here are steps to follow:· Covering and lubricating the threading of the shaftThe threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.· Don’t force it over sharp cornersThat’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.· Even stretchingYou will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.· Don’t roll it down the shaftInstead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.· Finishing it offPlace the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.Installation Guide<figure class="md-block-image"><img src="https://storage.googleapis.com/eezee-product-images/HmDZ~kJTK_g8vdoNCiTo4w.png" alt="" /><figcaption className="md-block-image-caption"></figcaption></figure>

ORING AS568 AS437
&nbsp;ID 151.77 X CS 6.99
Material : Nitrile (NBR) 90 Shore&nbsp;&nbsp;&nbsp;&nbsp;
&nbsp;&nbsp;
<ins>Additional Information</ins>
Nitrile is often referred to Buna (Buna-N) and NBR.
Nitrile elastomer being affordable is a common material widely used in the industry where sealing take place using O-Ring. It is popular in the industry due to it ability to withstand a wide range of temperature ranging from (-30`C to 100`C).&nbsp;
It has excellent resistance to petroleum application, it is rated good in the Gas impermeability. In addition Nitrile material are one of the best in its compression and abrasion resistance. The only down side of Nitrile have a poor ozone and weather resistance and only moderate resistance to high temperature.
However Nitrile are not a restricting factors in many applications.
<ins>Temperature Range</ins>
Low : -22`F / -30`C High: 212`F / 100`C
<ins>Overview on Application Rating for Material Nitrile (NBR) </ins>
Properties ( Rating )
Oils &amp; Grease - Good
Tear Strength - Good
Fuel Resistance - Poor
Gas impermeability - Good
Compression - Excellent
Abrasion Resistance - Good&nbsp;
Other than the size and material type, there is one final option that you need to take in consideration. And that is the Durometer. Durometer are being classify as an industry standard to measure the elastomer hardness. Durometer is measured and listed in accordance with Shore A scale. Typical standard hardness for the elastomer are 70 shore, 75 shore and 90 shore to choose from depending on the material that you are using. The higher the value of the shore indicates that the material you are using is harder.Durometer is also generally stated and accepted with a “+/- 5” tolerance.
<ins>Primary Usage</ins>
O-Rings and rubber seals are generally used for:
· Applications that require resistance to OIL
· Applications that are required to work in low temperatures (-0°C)
· High performance Fuel systems that requires strictly no leakage
<ul>
<li>Aircrafts</li>
<li>Marine Ships</li>
<li>F1 Cars</li>
</ul>
· General Industrial Use&nbsp;
<ins>Tips for installation of an O-ring</ins>
O-rings need to be installed properly for a perfect fit and sealing. It is important that you install the O-ring in a prescribed manner to ensure your application continues to function properly. You will also ensure you increase the life of the application.
<ins>So how do you install an O-ring?</ins>
The process of installing an O-ring into a male gland is an intricate affair that should be carefully undertaken. Glide it along the shaft so as it reaches the gland. At that point, it should easily snap into place. Simple as it might sound, a number of steps will ensure that the O-ring doesn’t get damaged.
If you want to install an O-ring correctly and within a short time, here are steps to follow:
· Covering and lubricating the threading of the shaft
The threading of the shaft has the potential of tearing the rubber seal. Cover the threads using a masking tape and then lubricate them to allow for easy passage of the O-ring. The aim is to have the O-ring slide through without getting torn.
· Don’t force it over sharp corners
That’s a tip that will save you the stress of a torn O-ring. In fact, running the O-ring over jagged or sharp objects could get it torn. You may not be able to notice some of these tears. That’s why you should ensure you prevent them from occurring in the first place.
· Even stretching
You will have to stretch the O-ring over the shaft. Ensure you do it evenly. Pulling from one side is a no-no. If anything, you should stretch the O-ring as little as possible. You will not just get a tighter grip but added security too.
· Don’t roll it down the shaft
Instead of rolling the O-ring down the shaft, slide it. If you spiral wind or roll an O-ring, it cannot be properly installed. It will also not function optimally and can even end up being damaged. If you have a lubricant, apply it on the O-ring and you will keep it rolling.
· Finishing it off
Place the female component in a manner that allows its radius to go around the corner. This should be done when you are finalizing the installation process. Ensure the lead of this component is inside the chamfer. This is how you will be able to guarantee the safety of the O-ring.
For O-rings to perform optimally, they have to be properly installed. It doesn’t just provide secure sealing but also increases the service life of the component together with the application. Don’t compromise on this process.
<ins>Installation Guide</ins>

 <div class="img-ctnr">
 <amp-img 
 on="tap:5lg30"
 tabindex="0"
 role="button"
 class="contain"
 layout="fill"
 src="https://storage.googleapis.com/eezee-product-images/HmDZ~kJTK_g8vdoNCiTo4w.png"
 ></amp-img>
 </div>
 
 <amp-image-lightbox 
 id="5lg30" 
 layout="nodisplay"></amp-image-lightbox>