AXIS

ELORA

Liqui Moly

Lumberg Automation

SCHNEIDER ELECTRIC

Electricals

electricals

Foot Switch

foot-switch

Industrial Automation and Control

industrial-automation-and-control

 IO-Link Master

io-link-master

IT & Electronics

it-electronics

IT Accessories

it-accessories

Painting Materials

painting-materials

Paint Thinners, Solvents & Cleaners

paint-thinners-solvents-cleaners

Screwdrivers & Screw Extractors

screwdrivers-screw-extractors

Screwdriver Bits & Bit Set

screwdriver-bits-bit-set

Lumberg Automation 935702002 0980 LSL 3110-121-0006-002 LioN-Xlight 4xIO-Link Class A, 8DI With EtherNet/IP 

Product Family: I/O Systems: Active - Standalone

Item Description: 0980 LSL 3110-121-0006-002

Power Connection (System Supply): M12 Power, 5-poles, L-coded

Protection Degree / IP Rating: IP65, IP67, IP69K

Dimensions (W x H x D): 60 mm x 31 mm x 200 mm

Ambient Temperature (Operation): -20 °C to 60 °C

Ambient Temperature (Storage/Transport): -20 °C to 60 °C

Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)

Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)

Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)

Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)

Protection Class: III, IEC 61140, EN 61140, VDE 0140-1

Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1

Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated

Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.

Fastening Torque (Fixing Screw): M4: 1 Nm

Fastening Torque (Ground Connection (FE)): M4: 1 Nm

Fastening Torque (Bus Connection): M12: 0.5 Nm

Fastening Torque (Power Connection): M12: 0.5 Nm

Fastening Torque (I/O Connection): M12: 0.5 Nm

Accessories to Order Separately: Ethernet cable, mounting adapter, sensor/actuator cable, power cable

Specification: CIP V3.2x, EIP Adaption of CIP V1.2x

Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex

Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing

Cycle Time / Requested Packet Interval (RPI): min. 1 ms

Connection Types: Exclusive Owner, Input Only, Listen Only

Device Level Ring (DLR): Supported, beacon based

Quick Connect (QC): Supported, ≤ 500 ms

Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP

Modbus TCP: Cyclic data read/write, Diagnosis data, Event data

Connection Module Supply Voltage: M12 Power, 5-poles, L-coded

Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Module Supply Voltage (Range): 20V DC to 30 V DC

Status Indicator (System Supply): LED green

Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded

Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)

Sensor Supply Voltage (Range): 20V DC to 30 V DC

Status Indicator (Sensor Supply): LED green

Diagnostic Indicator (Sensor Supply): LED red

Number of IO-Link Master Channels: max. 4, configurable

Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)

Cycle Time / Update Rate: min. 1 ms for all channels at 32 Byte IN / OUT

Nominal Voltage: 24 V DC via US (system power supply)

Perm. Conductor Length to Device: ≤ 20 m

Status Indicator (IOL): LED green per channel

Diagnostic Indicator (IOL): LED red per port

Number of Digital Input Channels: up to 16

Nominal Voltage: 24 V DC via US (module power supply)

Sensor Current Supply: max. 4A per port via Pin1L+

Input Voltage Range "0" signal: -3 V DC …+5 V DC

Input Voltage Range "1" signal: 15 V DC ... 30 V DC

Protective Circuit: Electronically: Overload protection, short-circuit protection

Status Indicator (Inputs): LED white or yellow per channel

Diagnostic Indicator (Inputs): LED red per port

<h3 class="md-block-header-three">Lumberg Automation 935702002 0980 LSL 3110-121-0006-002 LioN-Xlight 4xIO-Link Class A, 8DI With EtherNet/IP </h3><ul class="md-block-unordered-list-item"><li>Product Family: I/O Systems: Active - Standalone</li><li>Product Sub Family: LioN-Xlight</li><li>Item Description: 0980 LSL 3110-121-0006-002</li><li>Device Type: IO-Link Master</li><li>Protocol: EtherNet/IP</li><li>I/O Function: 4 IOL (Class A) + 8 DI</li><li>Bus Connection: M12, 4-poles, D-coded</li><li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li><li>I/O Connection: M12, 5-poles, A-coded</li><li>I/O Type: IO-Link Master</li></ul><h3 class="md-block-header-three">General Data</h3><ul class="md-block-unordered-list-item"><li>Housing Material: Metal, zinc die-cast</li><li>Housing Plating: Nickel, matt</li><li>Housing Color: Grey Metallic</li><li>Protection Degree / IP Rating: IP65, IP67, IP69K</li><li>Potted: Yes</li><li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li><li>Weight: 500 g</li><li>Ambient Temperature (Operation): -20 °C to 60 °C</li><li>Ambient Temperature (Storage/Transport): -20 °C to 60 °C</li><li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li><li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li><li>Flammability Class: UL 94 (IEC 61010)</li><li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li><li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li><li>Vibration Resistance: 15 g / 5 -500 Hz</li><li>Shock Resistance: 50 g / 11ms</li><li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li><li>Contact Bearer Material: PA / TPU</li><li>O-Ring Material: FKM</li><li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li><li>Fastening Torque (Fixing Screw): M4: 1 Nm</li><li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li><li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li><li>Fastening Torque (Power Connection): M12: 0.5 Nm</li><li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li><li>Accessories to Order Separately: Ethernet cable, mounting adapter, sensor/actuator cable, power cable</li></ul><h3 class="md-block-header-three">EtherNet/IP</h3><ul class="md-block-unordered-list-item"><li>Protocol: EtherNet/IP</li><li>Connection: M12, 4-poles, D-coded</li><li>Number of Connections: 2</li><li>Specification: CIP V3.2x, EIP Adaption of CIP V1.2x</li><li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li><li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li><li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li><li>Addressing: BootP, DHCP</li><li>Connection Types: Exclusive Owner, Input Only, Listen Only</li><li>CIP Msg Connection Limit: 6</li><li>CIP I/O Connection Limit: 3</li><li>Device Level Ring (DLR): Supported, beacon based</li><li>Quick Connect (QC): Supported, ≤ 500 ms</li><li>Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li><li>Modbus TCP: Cyclic data read/write, Diagnosis data, Event data</li><li>REST API: Supported</li></ul><h3 class="md-block-header-three">Power Supply</h3><ul class="md-block-unordered-list-item"><li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Number of Connections: 2</li><li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Module Supply Voltage (Range): 20V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (System Supply): LED green</li><li>Diagnostic Indicator: LED red</li><li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li><li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li><li>Sensor Supply Voltage (Range): 20V DC to 30 V DC</li><li>Reverse Polarity Protection: Yes</li><li>Status Indicator (Sensor Supply): LED green</li><li>Diagnostic Indicator (Sensor Supply): LED red</li></ul><h3 class="md-block-header-three">IO-Link Master Channels</h3><ul class="md-block-unordered-list-item"><li>Number of IO-Link Master Channels: max. 4, configurable</li><li>Connection: M12, 5-poles, A-coded</li><li>IO-Link Class A Ports: 4x, X1 to X4</li><li>IO-Link Specification: V1.1.3</li><li>Parameter Storage: Supported</li><li>Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)</li><li>Cycle Time / Update Rate: min. 1 ms for all channels at 32 Byte IN / OUT</li><li>Nominal Current 1L+ (Pin 1): 2A</li><li>Nominal Voltage: 24 V DC via US (system power supply)</li><li>Nominal Current C/Q (Pin 4): 500mA</li><li>Perm. Conductor Length to Device: ≤ 20 m</li><li>Status Indicator (IOL): LED green per channel</li><li>Diagnostic Indicator (IOL): LED red per port</li></ul><h3 class="md-block-header-three">Digital Input Channels</h3><ul class="md-block-unordered-list-item"><li>Number of Digital Input Channels: up to 16</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X8</li><li>Channel Type: Type 1 acc. to IEC 61131-2</li><li>Input Wiring: 2-, 3-, 4-wire</li><li>Nominal Voltage: 24 V DC via US (module power supply)</li><li>Sensor Current Supply: max. 4A per port via Pin1L+</li><li>Sensor Type: PNP</li><li>Input Voltage Range &quot;0&quot; signal: -3 V DC …+5 V DC</li><li>Input Voltage Range &quot;1&quot; signal: 15 V DC ... 30 V DC</li><li>Input Filter Time: configurable</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Status Indicator (Inputs): LED white or yellow per channel</li><li>Diagnostic Indicator (Inputs): LED red per port</li></ul><h3 class="md-block-header-three">Digital Output Channels</h3><ul class="md-block-unordered-list-item"><li>Number of Digital Output Channels: up to 4</li><li>Connection: M12, 5-poles, A-coded</li><li>Number of Ports: 8x, X1 to X4</li><li>Channel Type: p-switching</li><li>Output Wiring: 2-, 3-wire</li><li>Nominal Voltage: 24 V DC via US</li><li>Output Current per Channel: max. 500mA</li><li>Galvanically Isolated: No</li><li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li><li>Overload Behavior: Auto off and on switching / Manual restart</li><li>Status Indicator (Outputs): LED white or yellow per channel</li><li>Diagnostic Indicator (Outputs): LED red per port</li></ul><h3 class="md-block-header-three">Electrical Isolation</h3><ul class="md-block-unordered-list-item"><li>US (System Supply Voltage) / FE: 500 V DC</li><li>US / UL (Actuator Supply Voltage): 500 V DC</li><li>UL / FE: 500 V DC</li><li>Uaux / FE: 500 V DC</li><li>Bus connection / FE: 2000 V DC</li></ul><h3 class="md-block-header-three">EMC Conformance</h3><ul class="md-block-unordered-list-item"><li>EMC Directive: 2014/30/EU</li><li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li><li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li><li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li><li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li><li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li><li>EN 55032 Radio Interference Properties: Class A</li></ul><h3 class="md-block-header-three">Safety &amp; Environmental Compliance</h3><ul class="md-block-unordered-list-item"><li>CE: Yes</li><li>RoHS Compliant: Yes</li><li>China RoHS-Compliant: Yes</li></ul><h3 class="md-block-header-three">Approvals</h3><ul class="md-block-unordered-list-item"><li>UL: cULus Listed, UL 61010-1</li><li>CSA: Yes, via UL</li><li>ODVA: Yes</li><li>IO-Link: Yes</li></ul><h3 class="md-block-header-three">Notes</h3><ul class="md-block-unordered-list-item"><li>Protection Degree / IP Rating Note: *IP Rating test performed by Belden with Belden Connectors only</li><li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li></ul>

<h3>Lumberg Automation 935702002 0980 LSL 3110-121-0006-002 LioN-Xlight 4xIO-Link Class A, 8DI With EtherNet/IP&nbsp;</h3>
<ul>
<li>Product Family: I/O Systems: Active - Standalone</li>
<li>Product Sub Family: LioN-Xlight</li>
<li>Item Description: 0980 LSL 3110-121-0006-002</li>
<li>Device Type: IO-Link Master</li>
<li>Protocol: EtherNet/IP</li>
<li>I/O Function: 4 IOL (Class A) + 8 DI</li>
<li>Bus Connection: M12, 4-poles, D-coded</li>
<li>Power Connection (System Supply): M12 Power, 5-poles, L-coded</li>
<li>I/O Connection: M12, 5-poles, A-coded</li>
<li>I/O Type: IO-Link Master</li>
</ul>
<h3>General Data</h3>
<ul>
<li>Housing Material: Metal, zinc die-cast</li>
<li>Housing Plating: Nickel, matt</li>
<li>Housing Color: Grey Metallic</li>
<li>Protection Degree / IP Rating: IP65, IP67, IP69K</li>
<li>Potted: Yes</li>
<li>Dimensions (W x H x D): 60 mm x 31 mm x 200 mm</li>
<li>Weight: 500 g</li>
<li>Ambient Temperature (Operation): -20 °C to 60 °C</li>
<li>Ambient Temperature (Storage/Transport): -20 °C to 60 °C</li>
<li>Permissible Humidity (Operation): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Permissible Humidity (Storage/Transport): 5 % ... 95 % (For UL applications max. 80 %)</li>
<li>Air Pressure (Operation): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Air Pressure (Storage/Transport): 80 kPa … 106 kPa (up to 2000 m above sea level)</li>
<li>Flammability Class: UL 94 (IEC 61010)</li>
<li>Protection Class: III, IEC 61140, EN 61140, VDE 0140-1</li>
<li>Pollution Degree: 3 acc. to EN 60664-1, VDE 0110-1</li>
<li>Vibration Resistance: 15 g / 5 -500 Hz</li>
<li>Shock Resistance: 50 g / 11ms</li>
<li>Contact Base Material: M12, D-coded, CuSn, Gold-plated | M12 Power, L-coded, CuNi, Gold-plated</li>
<li>Contact Bearer Material: PA / TPU</li>
<li>O-Ring Material: FKM</li>
<li>Mounting: 2 hole screw mounting. Use standard M4 x 25 / 30 screws with toothed lock washer (as per DIN 125) and self-locking nuts.</li>
<li>Fastening Torque (Fixing Screw): M4: 1 Nm</li>
<li>Fastening Torque (Ground Connection (FE)): M4: 1 Nm</li>
<li>Fastening Torque (Bus Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (Power Connection): M12: 0.5 Nm</li>
<li>Fastening Torque (I/O Connection): M12: 0.5 Nm</li>
<li>Accessories to Order Separately: Ethernet cable, mounting adapter, sensor/actuator cable, power cable</li>
</ul>
<h3>EtherNet/IP</h3>
<ul>
<li>Protocol: EtherNet/IP</li>
<li>Connection: M12, 4-poles, D-coded</li>
<li>Number of Connections: 2</li>
<li>Specification: CIP V3.2x, EIP Adaption of CIP V1.2x</li>
<li>Transmission Rate: Fast Ethernet (10/100 Mbit/s), Full Duplex</li>
<li>Transmission Method: 100 BASE-TX, with auto negotiation and auto crossing</li>
<li>Cycle Time / Requested Packet Interval (RPI): min. 1 ms</li>
<li>Addressing: BootP, DHCP</li>
<li>Connection Types: Exclusive Owner, Input Only, Listen Only</li>
<li>CIP Msg Connection Limit: 6</li>
<li>CIP I/O Connection Limit: 3</li>
<li>Device Level Ring (DLR): Supported, beacon based</li>
<li>Quick Connect (QC): Supported, ≤ 500 ms</li>
<li>Supported Network Protocols (Other): ACD, ARP, BootP, DHCP, HTTP, IGMP, Ping, TCP/IP</li>
<li>Modbus TCP: Cyclic data read/write, Diagnosis data, Event data</li>
<li>REST API: Supported</li>
</ul>
<h3>Power Supply</h3>
<ul>
<li>Connection Module Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Number of Connections: 2</li>
<li>Module Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Module Supply Voltage (Range): 20V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (System Supply): LED green</li>
<li>Diagnostic Indicator: LED red</li>
<li>Connection Sensor Supply Voltage: M12 Power, 5-poles, L-coded</li>
<li>Sensor Supply Voltage (Nominal): 24 V DC (SELV/PELV)</li>
<li>Sensor Supply Voltage (Range): 20V DC to 30 V DC</li>
<li>Reverse Polarity Protection: Yes</li>
<li>Status Indicator (Sensor Supply): LED green</li>
<li>Diagnostic Indicator (Sensor Supply): LED red</li>
</ul>
<h3>IO-Link Master Channels</h3>
<ul>
<li>Number of IO-Link Master Channels: max. 4, configurable</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>IO-Link Class A Ports: 4x, X1 to X4</li>
<li>IO-Link Specification: V1.1.3</li>
<li>Parameter Storage: Supported</li>
<li>Supported COM Modes: 4.8 kBaud (COM 1), 38.4 kBaud (COM 2), 230.4 kBaud (COM 3)</li>
<li>Cycle Time / Update Rate: min. 1 ms for all channels at 32 Byte IN / OUT</li>
<li>Nominal Current 1L+ (Pin 1): 2A</li>
<li>Nominal Voltage: 24 V DC via US (system power supply)</li>
<li>Nominal Current C/Q (Pin 4): 500mA</li>
<li>Perm. Conductor Length to Device: ≤ 20 m</li>
<li>Status Indicator (IOL): LED green per channel</li>
<li>Diagnostic Indicator (IOL): LED red per port</li>
</ul>
<h3>Digital Input Channels</h3>
<ul>
<li>Number of Digital Input Channels: up to 16</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X8</li>
<li>Channel Type: Type 1 acc. to IEC 61131-2</li>
<li>Input Wiring: 2-, 3-, 4-wire</li>
<li>Nominal Voltage: 24 V DC via US (module power supply)</li>
<li>Sensor Current Supply: max. 4A per port via Pin1L+</li>
<li>Sensor Type: PNP</li>
<li>Input Voltage Range "0" signal: -3 V DC …+5 V DC</li>
<li>Input Voltage Range "1" signal: 15 V DC ... 30 V DC</li>
<li>Input Filter Time: configurable</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Status Indicator (Inputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator (Inputs): LED red per port</li>
</ul>
<h3>Digital Output Channels</h3>
<ul>
<li>Number of Digital Output Channels: up to 4</li>
<li>Connection: M12, 5-poles, A-coded</li>
<li>Number of Ports: 8x, X1 to X4</li>
<li>Channel Type: p-switching</li>
<li>Output Wiring: 2-, 3-wire</li>
<li>Nominal Voltage: 24 V DC via US</li>
<li>Output Current per Channel: max. 500mA</li>
<li>Galvanically Isolated: No</li>
<li>Protective Circuit: Electronically: Overload protection, short-circuit protection</li>
<li>Overload Behavior: Auto off and on switching / Manual restart</li>
<li>Status Indicator (Outputs): LED white or yellow per channel</li>
<li>Diagnostic Indicator (Outputs): LED red per port</li>
</ul>
<h3>Electrical Isolation</h3>
<ul>
<li>US (System Supply Voltage) / FE: 500 V DC</li>
<li>US / UL (Actuator Supply Voltage): 500 V DC</li>
<li>UL / FE: 500 V DC</li>
<li>Uaux / FE: 500 V DC</li>
<li>Bus connection / FE: 2000 V DC</li>
</ul>
<h3>EMC Conformance</h3>
<ul>
<li>EMC Directive: 2014/30/EU</li>
<li>EN 61000-4-2 Electrostatic Discharge (ESD): Criterion B; 4 kV contact discharge, 8 kV air discharge</li>
<li>EN 61000-4-3 Electromagnetic Field: Criterion A; Field intensity: 10 V/m</li>
<li>EN 61000-4-4 Fast Transients (Burst): Criterion B, 2 kV</li>
<li>EN 61000-4-5 Surge Voltage: Criterion B; DC supply lines: ±0.5 kV/±0.5 kV (symmetrical/asymmetrical); For I/O ports with cables ≤ 30m</li>
<li>EN 61000-4-6 Conducted immunity: Criterion A; Test voltage 10 V</li>
<li>EN 55032 Radio Interference Properties: Class A</li>
</ul>
<h3>Safety &amp; Environmental Compliance</h3>
<ul>
<li>CE: Yes</li>
<li>RoHS Compliant: Yes</li>
<li>China RoHS-Compliant: Yes</li>
</ul>
<h3>Approvals</h3>
<ul>
<li>UL: cULus Listed, UL 61010-1</li>
<li>CSA: Yes, via UL</li>
<li>ODVA: Yes</li>
<li>IO-Link: Yes</li>
</ul>
<h3>Notes</h3>
<ul>
<li>Protection Degree / IP Rating Note: *IP Rating test performed by Belden with Belden Connectors only</li>
<li>System Power Supply Connection Note: *do not connect / disconnect under voltage!</li>
</ul>

Hirschmann

Belden

Network Switches

Networking Products

Ethernet Cable

Fieldbus Repeaters

IT Cables

DIN Rail Power Supplies

Computer Supplies

Network Routers

 Data Diodes

Optical Bypass Relays

LHS ELECTRONICS

Lumberg Automation 935702002 0980 LSL 3110-121-0006-002 LioN-Xlight 4xIO-Link Class A, 8DI With EtherNet/IP

lumberg automation 935702002 0980 lsl 3110-121-0006-002 lion-xlight 4xio-link class a, 8di ethernet/ip kelas dengan io-link master automasi lionn-xlight lumberg/隆堡 类，8di，带以太网/ip 隆堡自动化

lumberg-automation-935702002-0980-lsl-3110-121-0006-002-lion-xlight-4xio-link-class-a-8di-with-ethernet-ip

RS Pro

Screw

O Ring

Surface Mount Resistors

Circular Connectors

Contactors

Bolts

Panel Mount Indicators 

Junction & Enclosure Box

Electrical Wire 

Button Switch

RS Components ETH SG

buyerIntroduction

Schneider Electric XPEM3110D Metal Case Material, 4NC+4NO, 3 A, 270 Ma Contact - Industrial Duty Momentary On-Off Foot Switch

schneider electric xpem3110d metal case material, 4nc+4no, a, 270ma contact industrial duty momentary on-off foot switch bahan casing logam xpem3110d, kontak sakelar kaki sesaat tugas industri sarung sentuhan suis hidup-mati seketika electric/施耐德电气 金属外壳材料，4nc+4no，3 a，270 触点 工业用瞬时开关脚踏开关 施耐德电气

schneider-electric-xpem3110d-metal-case-material-4nc-4no-3-a-270-ma-contact-industrial-duty-momentary-on-off-foot-switch

 AXIS D3110 gives sensor and audio capabilities to network video   systems or other IoT systems that do not have them or need additional ones.   The product comes with 2x Audio IN, Audio Out, 8x Configurable I/Os, Relay   and RS485/422.

 The product can be Powered over Ethernet or through DC. AXIS   D3110 supports MQTT, Vapix® and SIP. The product comes with Built-in   cybersecurity functionality preventing unauthorized access.    

<h3 class="md-block-header-three">Axis D3110 Connectivity Hub</h3><ul class="md-block-unordered-list-item"><li> AXIS D3110 gives sensor and audio capabilities to network video systems or other IoT systems that do not have them or need additional ones. The product comes with 2x Audio IN, Audio Out, 8x Configurable I/Os, Relay and RS485/422.</li><li> The product can be Powered over Ethernet or through DC. AXIS D3110 supports MQTT, Vapix® and SIP. The product comes with Built-in cybersecurity functionality preventing unauthorized access. </li><li>3 year warranty </li></ul>

<h3>Axis D3110 Connectivity Hub</h3>
<ul>
<li>&nbsp;AXIS D3110 gives sensor and audio capabilities to network video systems or other IoT systems that do not have them or need additional ones. The product comes with 2x Audio IN, Audio Out, 8x Configurable I/Os, Relay and RS485/422.</li>
<li>&nbsp;The product can be Powered over Ethernet or through DC. AXIS D3110 supports MQTT, Vapix® and SIP. The product comes with Built-in cybersecurity functionality preventing unauthorized access.&nbsp;&nbsp;&nbsp;&nbsp;</li>
<li>3 year warranty&nbsp;&nbsp;</li>
</ul>

Dong Mei

Axis D3110 Connectivity Hub

axis d3110 connectivity hub konektivitas accessories aksesoris hab ketersambungan aksesori axis/轴 连接中心 it配件

axis-d3110-connectivity-hub

 For fully functioning auto electrics. Reduces wear. Drives out moisture. Does not attack rubber, paints or plastics. Cleans and provides corrosion protection. Excellent lubricating qualities. Fully synthetic. Used for the care and maintenance of all electrical contacts such as plug and terminal connections, lights and fuses, ignition distributors and contact breakers, switches, battery terminals, alternators, starters, etc. For lubrication of fine mechanical components, such as door locks, jacks, rails or Bowden cables. 

Spray components before assembly, then assemble. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush.
Note: After spraying on, allow a flash-off period of 10 min. before connecting the component to a power supply. 

<h3 class="md-block-header-three">Liqui Moly 3110 Electronic Spray 200ml</h3> For fully functioning auto electrics. Reduces wear. Drives out moisture. Does not attack rubber, paints or plastics. Cleans and provides corrosion protection. Excellent lubricating qualities. Fully synthetic. Used for the care and maintenance of all electrical contacts such as plug and terminal connections, lights and fuses, ignition distributors and contact breakers, switches, battery terminals, alternators, starters, etc. For lubrication of fine mechanical components, such as door locks, jacks, rails or Bowden cables. <h4 class="md-block-header-four">Applic­a­tion</h4>Spray components before assembly, then assemble. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush. Note: After spraying on, allow a flash-off period of 10 min. before connecting the component to a power supply.

<h3>Liqui Moly 3110 Electronic Spray 200ml</h3>
&nbsp;For fully functioning auto electrics. Reduces wear. Drives out moisture. Does not attack rubber, paints or plastics. Cleans and provides corrosion protection. Excellent lubricating qualities. Fully synthetic. Used for the care and maintenance of all electrical contacts such as plug and terminal connections, lights and fuses, ignition distributors and contact breakers, switches, battery terminals, alternators, starters, etc. For lubrication of fine mechanical components, such as door locks, jacks, rails or Bowden cables.&nbsp;
<h4>Applic­a­tion</h4>
Spray components before assembly, then assemble. If the contacts are heavily corroded, allow the product to act for longer and rub off corrosion residues with a cloth or brush. 
Note: After spraying on, allow a flash-off period of 10 min. before connecting the component to a power supply.&nbsp;

Engine Oil & Fluid

Car Care Products

Lubricants

Multi Purpose Cleaners

Degreasers

Polishing Liquids

Rust Removers

Odor Eliminators

Leak Repair

Anti Rust Coating & Lubricant

Liqui Moly Singapore Pte Ltd

Liqui Moly 3110 Electronic Spray 200ml

liqui moly 3110 electronic spray 200ml semprotan elektronik paint thinners, solvents cleaners pengencer cat, pelarut pembersih semburan pencair, cat liqui-moly/锂钼 电子喷雾 涂料稀释剂，溶剂和清洁剂 力魔

liqui-moly-3110-electronic-spray-200ml

Elora 3110-IN 3 Inside-Hexagon Screwdriver Bit 5/16″ Drive

Description:- For inside hexagon screws
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173
Conforms to DIN ISO 2351-3

Elora 3110-IN 4 Inside-Hexagon Screwdriver Bit 5/16″ Drive

Elora 3110-IN 5 Inside-Hexagon Screwdriver Bit 5/16″ Drive

Elora 3110-IN 6 Inside-Hexagon Screwdriver Bit 5/16″ Drive

Elora 3110-IN 8 Inside-Hexagon Screwdriver Bit 5/16″ Drive

Elora 3110-IN 10 Inside-Hexagon Screwdriver Bit 5/16″ Drive

<h3 class="md-block-header-three">Elora 3110-IN 3 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3><h3 class="md-block-header-three">Product code: 3110000035200 </h3><ul class="md-block-unordered-list-item"><li>Description:- For inside hexagon screws Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 Conforms to DIN ISO 2351-3</li><li>Weight g:- 7,6</li><li>Length mm:- 30</li></ul><h3 class="md-block-header-three"> </h3><h3 class="md-block-header-three">Elora 3110-IN 4 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3><h3 class="md-block-header-three">Product code: 3110000045200 </h3><ul class="md-block-unordered-list-item"><li>Description:- For inside hexagon screws Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 Conforms to DIN ISO 2351-3</li><li>Weight g:- 9,6</li><li>Length mm:- 30</li></ul> <h3 class="md-block-header-three">Elora 3110-IN 5 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3><h3 class="md-block-header-three">Product code: 3110000055200 </h3><ul class="md-block-unordered-list-item"><li>Description:- For inside hexagon screws Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 Conforms to DIN ISO 2351-3</li><li>Weight g:- 8,9</li><li>Length mm:- 30</li></ul> <h3 class="md-block-header-three">Elora 3110-IN 6 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3><h3 class="md-block-header-three">Product code: 3110000065200 </h3><ul class="md-block-unordered-list-item"><li>Description:- For inside hexagon screws Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 Conforms to DIN ISO 2351-3</li><li>Weight g:- 10,4</li><li>Length mm:- 30</li></ul> <h3 class="md-block-header-three">Elora 3110-IN 8 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3><h3 class="md-block-header-three">Product code: 3110000085200 </h3><ul class="md-block-unordered-list-item"><li>Description:- For inside hexagon screws Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 Conforms to DIN ISO 2351-3</li><li>Weight g:- 12</li><li>Length mm:- 30</li></ul> <h3 class="md-block-header-three">Elora 3110-IN 10 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3><h3 class="md-block-header-three">Product code: 3110000105200 </h3><ul class="md-block-unordered-list-item"><li>Description:- For inside hexagon screws Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 Conforms to DIN ISO 2351-3</li><li>Weight g:- 14,4</li><li>Length mm:- 30</li></ul>

<h3>Elora 3110-IN 3 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3>
<h3>Product code: 3110000035200 </h3>
<ul>
<li>Description:- For inside hexagon screws 
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 
Conforms to DIN ISO 2351-3</li>
<li>Weight g:- 7,6</li>
<li>Length mm:- 30</li>
</ul>
<h3>&nbsp;</h3>
<h3>Elora 3110-IN 4 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3>
<h3>Product code: 3110000045200&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For inside hexagon screws 
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 
Conforms to DIN ISO 2351-3</li>
<li>Weight g:- 9,6</li>
<li>Length mm:- 30</li>
</ul>
&nbsp;
<h3>Elora 3110-IN 5 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3>
<h3>Product code: 3110000055200&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For inside hexagon screws 
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 
Conforms to DIN ISO 2351-3</li>
<li>Weight g:- 8,9</li>
<li>Length mm:- 30</li>
</ul>
&nbsp;
<h3>Elora 3110-IN 6 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3>
<h3>Product code: 3110000065200&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For inside hexagon screws 
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 
Conforms to DIN ISO 2351-3</li>
<li>Weight g:- 10,4</li>
<li>Length mm:- 30</li>
</ul>
&nbsp;
<h3>Elora 3110-IN 8 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3>
<h3>Product code: 3110000085200&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For inside hexagon screws 
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 
Conforms to DIN ISO 2351-3</li>
<li>Weight g:- 12</li>
<li>Length mm:- 30</li>
</ul>
&nbsp;
<h3>Elora 3110-IN 10 Inside-Hexagon Screwdriver Bit 5/16″ Drive</h3>
<h3>Product code: 3110000105200&nbsp;&nbsp;</h3>
<ul>
<li>Description:- For inside hexagon screws 
Elora-Chrome-Molybdenum-Vanadium 73MoV5-2 / 1.2381 
male hexagon drive Conforms to DIN 3126 C 8, DIN ISO 1173 
Conforms to DIN ISO 2351-3</li>
<li>Weight g:- 14,4</li>
<li>Length mm:- 30</li>
</ul>

Ian Ong

WEICON

LOCTITE

METABO

Permatex

Others

Fujiplus

DEVCON

Molykote

Adhesive Glue

Sealants

Threadlocker

Socket Accessories

Epoxy

Grease

Other Tools

Sharon/Joey

Elora 3110-IN Inside-Hexagon Screwdriver Bit 5/16″ Drive

elora 3110-in inside-hexagon screwdriver bit 5/16″ drive obeng 5/16 bits set pemutar skru memandu mata elora/埃洛拉 3110-in内六角螺丝刀批头5/16“驱动器 螺丝刀批头和批头套装 埃洛拉